From f839a7e32846bf9f12045aec9371b228c0e6dcbf Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 26 Apr 2009 15:34:36 -0400 Subject: cx18: Allow IVTV format VBI insertion in MPEG-2 SVCD and DVD streams From: Andy Walls Both the MPEG-2 SVCD stream format and the MPEG-2 DVD stream format should use an MPEG-2 PS container. This makes it safe to stuff IVTV Private Stream 1 VBI packets in these stream types using the existing cx18 driver routines. Reported-by: Helen Buus Priority: normal Signed-off-by: Andy Walls --- linux/drivers/media/video/cx18/cx18-controls.c | 6 ++++-- linux/drivers/media/video/cx18/cx18-fileops.c | 7 ++++++- 2 files changed, 10 insertions(+), 3 deletions(-) (limited to 'linux') diff --git a/linux/drivers/media/video/cx18/cx18-controls.c b/linux/drivers/media/video/cx18/cx18-controls.c index 82fc2f9d4..8e35c3aed 100644 --- a/linux/drivers/media/video/cx18/cx18-controls.c +++ b/linux/drivers/media/video/cx18/cx18-controls.c @@ -176,8 +176,10 @@ static int cx18_setup_vbi_fmt(struct cx18 *cx, return -EBUSY; if (fmt != V4L2_MPEG_STREAM_VBI_FMT_IVTV || - type != V4L2_MPEG_STREAM_TYPE_MPEG2_PS) { - /* We don't do VBI insertion aside from IVTV format in a PS */ + !(type == V4L2_MPEG_STREAM_TYPE_MPEG2_PS || + type == V4L2_MPEG_STREAM_TYPE_MPEG2_DVD || + type == V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD)) { + /* Only IVTV fmt VBI insertion & only MPEG-2 PS type streams */ cx->vbi.insert_mpeg = V4L2_MPEG_STREAM_VBI_FMT_NONE; CX18_DEBUG_INFO("disabled insertion of sliced VBI data into " "the MPEG stream\n"); diff --git a/linux/drivers/media/video/cx18/cx18-fileops.c b/linux/drivers/media/video/cx18/cx18-fileops.c index d20ac818f..817bb9263 100644 --- a/linux/drivers/media/video/cx18/cx18-fileops.c +++ b/linux/drivers/media/video/cx18/cx18-fileops.c @@ -301,8 +301,13 @@ static size_t cx18_copy_buf_to_user(struct cx18_stream *s, * an MPEG-2 Program Pack start code, and provide only * up to that point to the user, so it's easy to insert VBI data * the next time around. + * + * This will not work for an MPEG-2 TS and has only been + * verified by analysis to work for an MPEG-2 PS. Helen Buus + * pointed out this works for the CX23416 MPEG-2 DVD compatible + * stream, and research indicates both the MPEG 2 SVCD and DVD + * stream types use an MPEG-2 PS container. */ - /* FIXME - This only works for an MPEG-2 PS, not a TS */ /* * An MPEG-2 Program Stream (PS) is a series of * MPEG-2 Program Packs terminated by an -- cgit v1.2.3 From fea8fb6f1e235d4db4337c3a5f08bbc1de6b3af9 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 26 Apr 2009 16:02:25 -0400 Subject: cx18: Verify cx18-av-core digitizer firmware loads correctly From: Andy Walls Add code to verify the cx18-av-core digitizer firmware loads correctly. The verification function reads back and compares the firmware bytes loaded into the A/V core. The result of the verification is only used to log a message in the system log. This change was prompted by users with multiple card setups that have problems with broadcast audio decoding the first time the cx18 module is loaded. Priority: normal Signed-off-by: Andy Walls --- linux/drivers/media/video/cx18/cx18-av-firmware.c | 50 ++++++++++++++++++++++- 1 file changed, 48 insertions(+), 2 deletions(-) (limited to 'linux') diff --git a/linux/drivers/media/video/cx18/cx18-av-firmware.c b/linux/drivers/media/video/cx18/cx18-av-firmware.c index 49a55cc8d..ab99030dc 100644 --- a/linux/drivers/media/video/cx18/cx18-av-firmware.c +++ b/linux/drivers/media/video/cx18/cx18-av-firmware.c @@ -27,6 +27,48 @@ #define CX18_AUDIO_ENABLE 0xc72014 #define FWFILE "v4l-cx23418-dig.fw" +static int cx18_av_verifyfw(struct cx18 *cx, const struct firmware *fw) +{ + struct v4l2_subdev *sd = &cx->av_state.sd; + int ret = 0; + const u8 *data; + u32 size; + int addr; + u32 expected, dl_control; + + /* Ensure we put the 8051 in reset and enable firmware upload mode */ + dl_control = cx18_av_read4(cx, CXADEC_DL_CTL); + do { + dl_control &= 0x00ffffff; + dl_control |= 0x0f000000; + cx18_av_write4_noretry(cx, CXADEC_DL_CTL, dl_control); + dl_control = cx18_av_read4(cx, CXADEC_DL_CTL); + } while ((dl_control & 0xff000000) != 0x0f000000); + + /* Read and auto increment until at address 0x0000 */ + while (dl_control & 0x3fff) + dl_control = cx18_av_read4(cx, CXADEC_DL_CTL); + + data = fw->data; + size = fw->size; + for (addr = 0; addr < size; addr++) { + dl_control &= 0xffff3fff; /* ignore top 2 bits of address */ + expected = 0x0f000000 | ((u32)data[addr] << 16) | addr; + if (expected != dl_control) { + CX18_ERR_DEV(sd, "verification of %s firmware load " + "failed: expected %#010x got %#010x\n", + FWFILE, expected, dl_control); + ret = -EIO; + break; + } + dl_control = cx18_av_read4(cx, CXADEC_DL_CTL); + } + if (ret == 0) + CX18_INFO_DEV(sd, "verified load of %s firmware (%d bytes)\n", + FWFILE, size); + return ret; +} + int cx18_av_loadfw(struct cx18 *cx) { struct v4l2_subdev *sd = &cx->av_state.sd; @@ -95,6 +137,12 @@ int cx18_av_loadfw(struct cx18 *cx) } cx18_av_write4_expect(cx, CXADEC_DL_CTL, + 0x03000000 | fw->size, 0x03000000, 0x13000000); + + CX18_INFO_DEV(sd, "loaded %s firmware (%d bytes)\n", FWFILE, size); + + if (cx18_av_verifyfw(cx, fw) == 0) + cx18_av_write4_expect(cx, CXADEC_DL_CTL, 0x13000000 | fw->size, 0x13000000, 0x13000000); /* Output to the 416 */ @@ -143,7 +191,5 @@ int cx18_av_loadfw(struct cx18 *cx) cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, v, v, 0x3F00FFFF); release_firmware(fw); - - CX18_INFO_DEV(sd, "loaded %s firmware (%d bytes)\n", FWFILE, size); return 0; } -- cgit v1.2.3 From 65877f260b6716f91d4cd687d28c1d1a3f21b470 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 26 Apr 2009 17:46:14 -0400 Subject: cx18: Toggle the AI1 mux when changing the CX18_AUDIO_ENABLE register From: Andy Walls Toggle the AI1 mux when changing the CX18_AUDIO_ENABLE register. It's hard to reliably tell when we have written to this register successfully unless we change some bits we know we can read back. The AI mux bits always read back what we wrote to them, so force them to toggle whenever we have to write to the register, so we can tell we wrote to the register successfully. This change was prompted by users experiencing broadcast audio decoding problems after the cx18 module loads for the first time. Priority: normal Signed-off-by: Andy Walls --- linux/drivers/media/video/cx18/cx18-audio.c | 44 +++++++++++++++++++---- linux/drivers/media/video/cx18/cx18-av-firmware.c | 32 +++++++++++++++-- 2 files changed, 68 insertions(+), 8 deletions(-) (limited to 'linux') diff --git a/linux/drivers/media/video/cx18/cx18-audio.c b/linux/drivers/media/video/cx18/cx18-audio.c index 7a8ad5963..352689239 100644 --- a/linux/drivers/media/video/cx18/cx18-audio.c +++ b/linux/drivers/media/video/cx18/cx18-audio.c @@ -26,14 +26,18 @@ #include "cx18-cards.h" #include "cx18-audio.h" -#define CX18_AUDIO_ENABLE 0xc72014 +#define CX18_AUDIO_ENABLE 0xc72014 +#define CX18_AI1_MUX_MASK 0x30 +#define CX18_AI1_MUX_I2S1 0x00 +#define CX18_AI1_MUX_I2S2 0x10 +#define CX18_AI1_MUX_843_I2S 0x20 /* Selects the audio input and output according to the current settings. */ int cx18_audio_set_io(struct cx18 *cx) { const struct cx18_card_audio_input *in; - u32 val; + u32 u, v; int err; /* Determine which input to use */ @@ -52,9 +56,37 @@ int cx18_audio_set_io(struct cx18 *cx) return err; /* FIXME - this internal mux should be abstracted to a subdev */ - val = cx18_read_reg(cx, CX18_AUDIO_ENABLE) & ~0x30; - val |= (in->audio_input > CX18_AV_AUDIO_SERIAL2) ? 0x20 : - (in->audio_input << 4); - cx18_write_reg_expect(cx, val | 0xb00, CX18_AUDIO_ENABLE, val, 0x30); + u = cx18_read_reg(cx, CX18_AUDIO_ENABLE); + v = u & ~CX18_AI1_MUX_MASK; + switch (in->audio_input) { + case CX18_AV_AUDIO_SERIAL1: + v |= CX18_AI1_MUX_I2S1; + break; + case CX18_AV_AUDIO_SERIAL2: + v |= CX18_AI1_MUX_I2S2; + break; + default: + v |= CX18_AI1_MUX_843_I2S; + break; + } + if (v == u) { + /* force a toggle of some AI1 MUX control bits */ + u &= ~CX18_AI1_MUX_MASK; + switch (in->audio_input) { + case CX18_AV_AUDIO_SERIAL1: + u |= CX18_AI1_MUX_843_I2S; + break; + case CX18_AV_AUDIO_SERIAL2: + u |= CX18_AI1_MUX_843_I2S; + break; + default: + u |= CX18_AI1_MUX_I2S1; + break; + } + cx18_write_reg_expect(cx, u | 0xb00, CX18_AUDIO_ENABLE, + u, CX18_AI1_MUX_MASK); + } + cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE, + v, CX18_AI1_MUX_MASK); return 0; } diff --git a/linux/drivers/media/video/cx18/cx18-av-firmware.c b/linux/drivers/media/video/cx18/cx18-av-firmware.c index ab99030dc..b9e8cc5d2 100644 --- a/linux/drivers/media/video/cx18/cx18-av-firmware.c +++ b/linux/drivers/media/video/cx18/cx18-av-firmware.c @@ -24,7 +24,13 @@ #include "cx18-io.h" #include -#define CX18_AUDIO_ENABLE 0xc72014 +#define CX18_AUDIO_ENABLE 0xc72014 +#define CX18_AI1_MUX_MASK 0x30 +#define CX18_AI1_MUX_I2S1 0x00 +#define CX18_AI1_MUX_I2S2 0x10 +#define CX18_AI1_MUX_843_I2S 0x20 +#define CX18_AI1_MUX_INVALID 0x30 + #define FWFILE "v4l-cx23418-dig.fw" static int cx18_av_verifyfw(struct cx18 *cx, const struct firmware *fw) @@ -74,7 +80,7 @@ int cx18_av_loadfw(struct cx18 *cx) struct v4l2_subdev *sd = &cx->av_state.sd; const struct firmware *fw = NULL; u32 size; - u32 v; + u32 u, v; const u8 *ptr; int i; int retries1 = 0; @@ -183,6 +189,28 @@ int cx18_av_loadfw(struct cx18 *cx) cx18_write_reg_expect(cx, v & 0xFFFFFBFF, CX18_AUDIO_ENABLE, 0, 0x400); + /* Toggle the AI1 MUX */ + v = cx18_read_reg(cx, CX18_AUDIO_ENABLE); + u = v & CX18_AI1_MUX_MASK; + v &= ~CX18_AI1_MUX_MASK; + if (u == CX18_AI1_MUX_843_I2S || u == CX18_AI1_MUX_INVALID) { + /* Switch to I2S1 */ + v |= CX18_AI1_MUX_I2S1; + cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE, + v, CX18_AI1_MUX_MASK); + /* Switch back to the A/V decoder core I2S output */ + v = (v & ~CX18_AI1_MUX_MASK) | CX18_AI1_MUX_843_I2S; + } else { + /* Switch to the A/V decoder core I2S output */ + v |= CX18_AI1_MUX_843_I2S; + cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE, + v, CX18_AI1_MUX_MASK); + /* Switch back to I2S1 or I2S2 */ + v = (v & ~CX18_AI1_MUX_MASK) | u; + } + cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE, + v, CX18_AI1_MUX_MASK); + /* Enable WW auto audio standard detection */ v = cx18_av_read4(cx, CXADEC_STD_DET_CTL); v |= 0xFF; /* Auto by default */ -- cgit v1.2.3