/* saa711x - Philips SAA711x video decoder register specifications * * Copyright (c) 2006 Mauro Carvalho Chehab * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #define R_00_CHIP_VERSION 0x00 /* Video Decoder */ /* Video Decoder - Frontend part */ #define R_01_INC_DELAY 0x01 #define R_02_INPUT_CNTL_1 0x02 #define R_03_INPUT_CNTL_2 0x03 #define R_04_INPUT_CNTL_3 0x04 #define R_05_INPUT_CNTL_4 0x05 /* Video Decoder - Decoder part */ #define R_06_H_SYNC_START 0x06 #define R_07_H_SYNC_STOP 0x07 #define R_08_SYNC_CNTL 0x08 #define R_09_LUMA_CNTL 0x09 #define R_0A_LUMA_BRIGHT_CNTL 0x0a #define R_0B_LUMA_CONTRAST_CNTL 0x0b #define R_0C_CHROMA_SAT_CNTL 0x0c #define R_0D_CHROMA_HUE_CNTL 0x0d #define R_0E_CHROMA_CNTL_1 0x0e #define R_0F_CHROMA_GAIN_CNTL 0x0f #define R_10_CHROMA_CNTL_2 0x10 #define R_11_MODE_DELAY_CNTL 0x11 #define R_12_RT_SIGNAL_CNTL 0x12 #define R_13_RT_X_PORT_OUT_CNTL 0x13 #define R_14_ANAL_ADC_COMPAT_CNTL 0x14 #define R_15_VGATE_START_FID_CHG 0x15 #define R_16_VGATE_STOP 0x16 #define R_17_MISC_VGATE_CONF_AND_MSB 0x17 #define R_18_RAW_DATA_GAIN_CNTL 0x18 #define R_19_RAW_DATA_OFF_CNTL 0x19 #define R_1A_COLOR_KILL_LVL_CNTL 0x1a #define R_1B_MISC_TVVCRDET 0x1b #define R_1C_ENHAN_COMB_CTRL1 0x1c #define R_1D_ENHAN_COMB_CTRL2 0x1d #define R_1E_STATUS_BYTE_1_VD_DEC 0x1e #define R_1F_STATUS_BYTE_2_VD_DEC 0x1f /* Component processing and interrupt masking part */ #define R_23_INPUT_CNTL_5 0x23 #define R_24_INPUT_CNTL_6 0x24 #define R_25_INPUT_CNTL_7 0x25 #define R_29_COMP_DELAY 0x29 #define R_2A_COMP_BRIGHT_CNTL 0x2a #define R_2B_COMP_CONTRAST_CNTL 0x2b #define R_2C_COMP_SAT_CNTL 0x2c #define R_2D_INTERRUPT_MASK_1 0x2d #define R_2E_INTERRUPT_MASK_2 0x2e #define R_2F_INTERRUPT_MASK_3 0x2f /* Audio clock generator part */ #define R_30_AUD_MAST_CLK_CYCLES_PER_FIELD 0x30 #define R_34_AUD_MAST_CLK_NOMINAL_INC 0x34 #define R_38_CLK_RATIO_AMXCLK_TO_ASCLK 0x38 #define R_39_CLK_RATIO_ASCLK_TO_ALRCLK 0x39 #define R_3A_AUD_CLK_GEN_BASIC_SETUP 0x3a /* General purpose VBI data slicer part */ #define R_40_SLICER_CNTL_1 0x40 #define R_41_LCR_BASE 0x41 #define R_58_PROGRAM_FRAMING_CODE 0x58 #define R_59_H_OFF_FOR_SLICER 0x59 #define R_5A_V_OFF_FOR_SLICER 0x5a #define R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF 0x5b #define R_5D_DID 0x5d #define R_5E_SDID 0x5e #define R_60_SLICER_STATUS_BYTE_0 0x60 #define R_61_SLICER_STATUS_BYTE_1 0x61 #define R_62_SLICER_STATUS_BYTE_2 0x62 /* X port, I port and the scaler part */ /* Task independent global settings */ #define R_80_GLOBAL_CNTL_1 0x80 #define R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F 0x81 #define R_83_X_PORT_I_O_ENA_AND_OUT_CLK 0x83 #define R_84_I_PORT_SIGNAL_DEF 0x84 #define R_85_I_PORT_SIGNAL_POLAR 0x85 #define R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT 0x86 #define R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED 0x87 #define R_88_POWER_SAVE_ADC_PORT_CNTL 0x88 #define R_8F_STATUS_INFO_SCALER 0x8f /* Task A definition */ /* Basic settings and acquisition window definition */ #define R_90_A_TASK_HANDLING_CNTL 0x90 #define R_91_A_X_PORT_FORMATS_AND_CONF 0x91 #define R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL 0x92 #define R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF 0x93 #define R_94_A_HORIZ_INPUT_WINDOW_START 0x94 #define R_95_A_HORIZ_INPUT_WINDOW_START_MSB 0x95 #define R_96_A_HORIZ_INPUT_WINDOW_LENGTH 0x96 #define R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB 0x97 #define R_98_A_VERT_INPUT_WINDOW_START 0x98 #define R_99_A_VERT_INPUT_WINDOW_START_MSB 0x99 #define R_9A_A_VERT_INPUT_WINDOW_LENGTH 0x9a #define R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB 0x9b #define R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH 0x9c #define R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB 0x9d #define R_9E_A_VERT_OUTPUT_WINDOW_LENGTH 0x9e #define R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB 0x9f /* FIR filtering and prescaling */ #define R_A0_A_HORIZ_PRESCALING 0xa0 #define R_A1_A_ACCUMULATION_LENGTH 0xa1 #define R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER 0xa2 #define R_A4_A_LUMA_BRIGHTNESS_CNTL 0xa4 #define R_A5_A_LUMA_CONTRAST_CNTL 0xa5 #define R_A6_A_CHROMA_SATURATION_CNTL 0xa6 /* Horizontal phase scaling */ #define R_A8_A_HORIZ_LUMA_SCALING_INC 0xa8 #define R_A9_A_HORIZ_LUMA_SCALING_INC_MSB 0xa9 #define R_AA_A_HORIZ_LUMA_PHASE_OFF 0xaa #define R_AC_A_HORIZ_CHROMA_SCALING_INC 0xac #define R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB 0xad #define R_AE_A_HORIZ_CHROMA_PHASE_OFF 0xae #define R_AF_A_HORIZ_CHROMA_PHASE_OFF_MSB 0xaf /* Vertical scaling */ #define R_B0_A_VERT_LUMA_SCALING_INC 0xb0 #define R_B1_A_VERT_LUMA_SCALING_INC_MSB 0xb1 #define R_B2_A_VERT_CHROMA_SCALING_INC 0xb2 #define R_B3_A_VERT_CHROMA_SCALING_INC_MSB 0xb3 #define R_B4_A_VERT_SCALING_MODE_CNTL 0xb4 #define R_B8_A_VERT_CHROMA_PHASE_OFF_00 0xb8 #define R_B9_A_VERT_CHROMA_PHASE_OFF_01 0xb9 #define R_BA_A_VERT_CHROMA_PHASE_OFF_10 0xba #define R_BB_A_VERT_CHROMA_PHASE_OFF_11 0xbb #define R_BC_A_VERT_LUMA_PHASE_OFF_00 0xbc #define R_BD_A_VERT_LUMA_PHASE_OFF_01 0xbd #define R_BE_A_VERT_LUMA_PHASE_OFF_10 0xbe #define R_BF_A_VERT_LUMA_PHASE_OFF_11 0xbf /* Task B definition */ /* Basic settings and acquisition window definition */ #define R_C0_B_TASK_HANDLING_CNTL 0xc0 #define R_C1_B_X_PORT_FORMATS_AND_CONF 0xc1 #define R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION 0xc2 #define R_C3_B_I_PORT_FORMATS_AND_CONF 0xc3 #define R_C4_B_HORIZ_INPUT_WINDOW_START 0xc4 #define R_C5_B_HORIZ_INPUT_WINDOW_START_MSB 0xc5 #define R_C6_B_HORIZ_INPUT_WINDOW_LENGTH 0xc6 #define R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB 0xc7 #define R_C8_B_VERT_INPUT_WINDOW_START 0xc8 #define R_C9_B_VERT_INPUT_WINDOW_START_MSB 0xc9 #define R_CA_B_VERT_INPUT_WINDOW_LENGTH 0xca #define R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB 0xcb #define R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH 0xcc #define R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB 0xcd #define R_CE_B_VERT_OUTPUT_WINDOW_LENGTH 0xce #define R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB 0xcf /* FIR filtering and prescaling */ #define R_D0_B_HORIZ_PRESCALING 0xd0 #define R_D1_B_ACCUMULATION_LENGTH 0xd1 #define R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER 0xd2 #define R_D4_B_LUMA_BRIGHTNESS_CNTL 0xd4 #define R_D5_B_LUMA_CONTRAST_CNTL 0xd5 #define R_D6_B_CHROMA_SATURATION_CNTL 0xd6 /* Horizontal phase scaling */ #define R_D8_B_HORIZ_LUMA_SCALING_INC 0xd8 #define R_D9_B_HORIZ_LUMA_SCALING_INC_MSB 0xd9 #define R_DA_B_HORIZ_LUMA_PHASE_OFF 0xda #define R_DC_B_HORIZ_CHROMA_SCALING 0xdc #define R_DD_B_HORIZ_CHROMA_SCALING_MSB 0xdd #define R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA 0xde /* Vertical scaling */ #define R_E0_B_VERT_LUMA_SCALING_INC 0xe0 #define R_E1_B_VERT_LUMA_SCALING_INC_MSB 0xe1 #define R_E2_B_VERT_CHROMA_SCALING_INC 0xe2 #define R_E3_B_VERT_CHROMA_SCALING_INC_MSB 0xe3 #define R_E4_B_VERT_SCALING_MODE_CNTL 0xe4 #define R_E8_B_VERT_CHROMA_PHASE_OFF_00 0xe8 #define R_E9_B_VERT_CHROMA_PHASE_OFF_01 0xe9 #define R_EA_B_VERT_CHROMA_PHASE_OFF_10 0xea #define R_EB_B_VERT_CHROMA_PHASE_OFF_11 0xeb #define R_EC_B_VERT_LUMA_PHASE_OFF_00 0xec #define R_ED_B_VERT_LUMA_PHASE_OFF_01 0xed #define R_EE_B_VERT_LUMA_PHASE_OFF_10 0xee #define R_EF_B_VERT_LUMA_PHASE_OFF_11 0xef /* second PLL (PLL2) and Pulsegenerator Programming */ #define R_F0_LFCO_PER_LINE 0xf0 #define R_F1_P_I_PARAM_SELECT 0xf1 #define R_F2_NOMINAL_PLL2_DTO 0xf2 #define R_F3_PLL_INCREMENT 0xf3 #define R_F4_PLL2_STATUS 0xf4 #define R_F5_PULSGEN_LINE_LENGTH 0xf5 #define R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG 0xf6 #define R_F7_PULSE_A_POS_MSB 0xf7 #define R_F8_PULSE_B_POS 0xf8 #define R_F9_PULSE_B_POS_MSB 0xf9 #define R_FA_PULSE_C_POS 0xfa #define R_FB_PULSE_C_POS_MSB 0xfb #define R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES 0xff #if 0 /* keep */ /* Those structs will be used in the future for debug purposes */ struct saa711x_reg_descr { u8 reg; int count; char *name; }; struct saa711x_reg_descr saa711x_regs[] = { /* REG COUNT NAME */ {R_00_CHIP_VERSION,1, "Chip version"}, /* Video Decoder: R_01_INC_DELAY to R_1F_STATUS_BYTE_2_VD_DEC */ /* Video Decoder - Frontend part: R_01_INC_DELAY to R_05_INPUT_CNTL_4 */ {R_01_INC_DELAY,1, "Increment delay"}, {R_02_INPUT_CNTL_1,1, "Analog input control 1"}, {R_03_INPUT_CNTL_2,1, "Analog input control 2"}, {R_04_INPUT_CNTL_3,1, "Analog input control 3"}, {R_05_INPUT_CNTL_4,1, "Analog input control 4"}, /* Video Decoder - Decoder part: R_06_H_SYNC_START to R_1F_STATUS_BYTE_2_VD_DEC */ {R_06_H_SYNC_START,1, "Horizontal sync start"}, {R_07_H_SYNC_STOP,1, "Horizontal sync stop"}, {R_08_SYNC_CNTL,1, "Sync control"}, {R_09_LUMA_CNTL,1, "Luminance control"}, {R_0A_LUMA_BRIGHT_CNTL,1, "Luminance brightness control"}, {R_0B_LUMA_CONTRAST_CNTL,1, "Luminance contrast control"}, {R_0C_CHROMA_SAT_CNTL,1, "Chrominance saturation control"}, {R_0D_CHROMA_HUE_CNTL,1, "Chrominance hue control"}, {R_0E_CHROMA_CNTL_1,1, "Chrominance control 1"}, {R_0F_CHROMA_GAIN_CNTL,1, "Chrominance gain control"}, {R_10_CHROMA_CNTL_2,1, "Chrominance control 2"}, {R_11_MODE_DELAY_CNTL,1, "Mode/delay control"}, {R_12_RT_SIGNAL_CNTL,1, "RT signal control"}, {R_13_RT_X_PORT_OUT_CNTL,1, "RT/X port output control"}, {R_14_ANAL_ADC_COMPAT_CNTL,1, "Analog/ADC/compatibility control"}, {R_15_VGATE_START_FID_CHG, 1, "VGATE start FID change"}, {R_16_VGATE_STOP,1, "VGATE stop"}, {R_17_MISC_VGATE_CONF_AND_MSB, 1, "Miscellaneous VGATE configuration and MSBs"}, {R_18_RAW_DATA_GAIN_CNTL,1, "Raw data gain control",}, {R_19_RAW_DATA_OFF_CNTL,1, "Raw data offset control",}, {R_1A_COLOR_KILL_LVL_CNTL,1, "Color Killer Level Control"}, { R_1B_MISC_TVVCRDET, 1, "MISC /TVVCRDET"}, { R_1C_ENHAN_COMB_CTRL1, 1, "Enhanced comb ctrl1"}, { R_1D_ENHAN_COMB_CTRL2, 1, "Enhanced comb ctrl1"}, {R_1E_STATUS_BYTE_1_VD_DEC,1, "Status byte 1 video decoder"}, {R_1F_STATUS_BYTE_2_VD_DEC,1, "Status byte 2 video decoder"}, /* Component processing and interrupt masking part: 0x20h to R_2F_INTERRUPT_MASK_3 */ /* 0x20 to 0x22 - Reserved */ {R_23_INPUT_CNTL_5,1, "Analog input control 5"}, {R_24_INPUT_CNTL_6,1, "Analog input control 6"}, {R_25_INPUT_CNTL_7,1, "Analog input control 7"}, /* 0x26 to 0x28 - Reserved */ {R_29_COMP_DELAY,1, "Component delay"}, {R_2A_COMP_BRIGHT_CNTL,1, "Component brightness control"}, {R_2B_COMP_CONTRAST_CNTL,1, "Component contrast control"}, {R_2C_COMP_SAT_CNTL,1, "Component saturation control"}, {R_2D_INTERRUPT_MASK_1,1, "Interrupt mask 1"}, {R_2E_INTERRUPT_MASK_2,1, "Interrupt mask 2"}, {R_2F_INTERRUPT_MASK_3,1, "Interrupt mask 3"}, /* Audio clock generator part: R_30_AUD_MAST_CLK_CYCLES_PER_FIELD to 0x3f */ {R_30_AUD_MAST_CLK_CYCLES_PER_FIELD,3, "Audio master clock cycles per field"}, /* 0x33 - Reserved */ {R_34_AUD_MAST_CLK_NOMINAL_INC,3, "Audio master clock nominal increment"}, /* 0x37 - Reserved */ {R_38_CLK_RATIO_AMXCLK_TO_ASCLK,1, "Clock ratio AMXCLK to ASCLK"}, {R_39_CLK_RATIO_ASCLK_TO_ALRCLK,1, "Clock ratio ASCLK to ALRCLK"}, {R_3A_AUD_CLK_GEN_BASIC_SETUP,1, "Audio clock generator basic setup"}, /* 0x3b-0x3f - Reserved */ /* General purpose VBI data slicer part: R_40_SLICER_CNTL_1 to 0x7f */ {R_40_SLICER_CNTL_1,1, "Slicer control 1"}, {R_41_LCR,23, "R_41_LCR"}, {R_58_PROGRAM_FRAMING_CODE,1, "Programmable framing code"}, {R_59_H_OFF_FOR_SLICER,1, "Horizontal offset for slicer"}, {R_5A_V_OFF_FOR_SLICER,1, "Vertical offset for slicer"}, {R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF,1, "Field offset and MSBs for horizontal and vertical offset"}, {R_5D_DID,1, "Header and data identification (R_5D_DID)"}, {R_5E_SDID,1, "Sliced data identification (R_5E_SDID) code"}, {R_60_SLICER_STATUS_BYTE_0,1, "Slicer status byte 0"}, {R_61_SLICER_STATUS_BYTE_1,1, "Slicer status byte 1"}, {R_62_SLICER_STATUS_BYTE_2,1, "Slicer status byte 2"}, /* 0x63-0x7f - Reserved */ /* X port, I port and the scaler part: R_80_GLOBAL_CNTL_1 to R_EF_B_VERT_LUMA_PHASE_OFF_11 */ /* Task independent global settings: R_80_GLOBAL_CNTL_1 to R_8F_STATUS_INFO_SCALER */ {R_80_GLOBAL_CNTL_1,1, "Global control 1"}, {R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F,1, "Vertical sync and Field ID source selection, retimed V and F signals"}, /* 0x82 - Reserved */ {R_83_X_PORT_I_O_ENA_AND_OUT_CLK,1, "X port I/O enable and output clock"}, {R_84_I_PORT_SIGNAL_DEF,1, "I port signal definitions"}, {R_85_I_PORT_SIGNAL_POLAR,1, "I port signal polarities"}, {R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT,1, "I port FIFO flag control and arbitration"}, {R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 1, "I port I/O enable output clock and gated"}, {R_88_POWER_SAVE_ADC_PORT_CNTL,1, "Power save/ADC port control"}, /* 089-0x8e - Reserved */ {R_8F_STATUS_INFO_SCALER,1, "Status information scaler part"}, /* Task A definition: R_90_A_TASK_HANDLING_CNTL to R_BF_A_VERT_LUMA_PHASE_OFF_11 */ /* Task A: Basic settings and acquisition window definition */ {R_90_A_TASK_HANDLING_CNTL,1, "Task A: Task handling control"}, {R_91_A_X_PORT_FORMATS_AND_CONF,1, "Task A: X port formats and configuration"}, {R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL,1, "Task A: X port input reference signal definition"}, {R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF,1, "Task A: I port output formats and configuration"}, {R_94_A_HORIZ_INPUT_WINDOW_START,2, "Task A: Horizontal input window start"}, {R_96_A_HORIZ_INPUT_WINDOW_LENGTH,2, "Task A: Horizontal input window length"}, {R_98_A_VERT_INPUT_WINDOW_START,2, "Task A: Vertical input window start"}, {R_9A_A_VERT_INPUT_WINDOW_LENGTH,2, "Task A: Vertical input window length"}, {R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH,2, "Task A: Horizontal output window length"}, {R_9E_A_VERT_OUTPUT_WINDOW_LENGTH,2, "Task A: Vertical output window length"}, /* Task A: FIR filtering and prescaling */ {R_A0_A_HORIZ_PRESCALING,1, "Task A: Horizontal prescaling"}, {R_A1_A_ACCUMULATION_LENGTH,1, "Task A: Accumulation length"}, {R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1, "Task A: Prescaler DC gain and FIR prefilter"}, /* 0xa3 - Reserved */ {R_A4_A_LUMA_BRIGHTNESS_CNTL,1, "Task A: Luminance brightness control"}, {R_A5_A_LUMA_CONTRAST_CNTL,1, "Task A: Luminance contrast control"}, {R_A6_A_CHROMA_SATURATION_CNTL,1, "Task A: Chrominance saturation control"}, /* 0xa7 - Reserved */ /* Task A: Horizontal phase scaling */ {R_A8_A_HORIZ_LUMA_SCALING_INC,2, "Task A: Horizontal luminance scaling increment"}, {R_AA_A_HORIZ_LUMA_PHASE_OFF,1, "Task A: Horizontal luminance phase offset"}, /* 0xab - Reserved */ {R_AC_A_HORIZ_CHROMA_SCALING_INC,2, "Task A: Horizontal chrominance scaling increment"}, {R_AE_A_HORIZ_CHROMA_PHASE_OFF,1, "Task A: Horizontal chrominance phase offset"}, /* 0xaf - Reserved */ /* Task A: Vertical scaling */ {R_B0_A_VERT_LUMA_SCALING_INC,2, "Task A: Vertical luminance scaling increment"}, {R_B2_A_VERT_CHROMA_SCALING_INC,2, "Task A: Vertical chrominance scaling increment"}, {R_B4_A_VERT_SCALING_MODE_CNTL,1, "Task A: Vertical scaling mode control"}, /* 0xb5-0xb7 - Reserved */ {R_B8_A_VERT_CHROMA_PHASE_OFF_00,1, "Task A: Vertical chrominance phase offset '00'"}, {R_B9_A_VERT_CHROMA_PHASE_OFF_01,1, "Task A: Vertical chrominance phase offset '01'"}, {R_BA_A_VERT_CHROMA_PHASE_OFF_10,1, "Task A: Vertical chrominance phase offset '10'"}, {R_BB_A_VERT_CHROMA_PHASE_OFF_11,1, "Task A: Vertical chrominance phase offset '11'"}, {R_BC_A_VERT_LUMA_PHASE_OFF_00,1, "Task A: Vertical luminance phase offset '00'"}, {R_BD_A_VERT_LUMA_PHASE_OFF_01,1, "Task A: Vertical luminance phase offset '01'"}, {R_BE_A_VERT_LUMA_PHASE_OFF_10,1, "Task A: Vertical luminance phase offset '10'"}, {R_BF_A_VERT_LUMA_PHASE_OFF_11,1, "Task A: Vertical luminance phase offset '11'"}, /* Task B definition: R_C0_B_TASK_HANDLING_CNTL to R_EF_B_VERT_LUMA_PHASE_OFF_11 */ /* Task B: Basic settings and acquisition window definition */ {R_C0_B_TASK_HANDLING_CNTL,1, "Task B: Task handling control"}, {R_C1_B_X_PORT_FORMATS_AND_CONF,1, "Task B: X port formats and configuration"}, {R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION,1, "Task B: Input reference signal definition"}, {R_C3_B_I_PORT_FORMATS_AND_CONF,1, "Task B: I port formats and configuration"}, {R_C4_B_HORIZ_INPUT_WINDOW_START,2, "Task B: Horizontal input window start"}, {R_C6_B_HORIZ_INPUT_WINDOW_LENGTH,2, "Task B: Horizontal input window length"}, {R_C8_B_VERT_INPUT_WINDOW_START,2, "Task B: Vertical input window start"}, {R_CA_B_VERT_INPUT_WINDOW_LENGTH,2, "Task B: Vertical input window length"}, {R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH,2, "Task B: Horizontal output window length"}, {R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,2, "Task B: Vertical output window length"}, /* Task B: FIR filtering and prescaling */ {R_D0_B_HORIZ_PRESCALING,1, "Task B: Horizontal prescaling"}, {R_D1_B_ACCUMULATION_LENGTH,1, "Task B: Accumulation length"}, {R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1, "Task B: Prescaler DC gain and FIR prefilter"}, /* 0xd3 - Reserved */ {R_D4_B_LUMA_BRIGHTNESS_CNTL,1, "Task B: Luminance brightness control"}, {R_D5_B_LUMA_CONTRAST_CNTL,1, "Task B: Luminance contrast control"}, {R_D6_B_CHROMA_SATURATION_CNTL,1, "Task B: Chrominance saturation control"}, /* 0xd7 - Reserved */ /* Task B: Horizontal phase scaling */ {R_D8_B_HORIZ_LUMA_SCALING_INC,2, "Task B: Horizontal luminance scaling increment"}, {R_DA_B_HORIZ_LUMA_PHASE_OFF,1, "Task B: Horizontal luminance phase offset"}, /* 0xdb - Reserved */ {R_DC_B_HORIZ_CHROMA_SCALING,2, "Task B: Horizontal chrominance scaling"}, {R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA,1, "Task B: Horizontal Phase Offset Chroma"}, /* 0xdf - Reserved */ /* Task B: Vertical scaling */ {R_E0_B_VERT_LUMA_SCALING_INC,2, "Task B: Vertical luminance scaling increment"}, {R_E2_B_VERT_CHROMA_SCALING_INC,2, "Task B: Vertical chrominance scaling increment"}, {R_E4_B_VERT_SCALING_MODE_CNTL,1, "Task B: Vertical scaling mode control"}, /* 0xe5-0xe7 - Reserved */ {R_E8_B_VERT_CHROMA_PHASE_OFF_00,1, "Task B: Vertical chrominance phase offset '00'"}, {R_E9_B_VERT_CHROMA_PHASE_OFF_01,1, "Task B: Vertical chrominance phase offset '01'"}, {R_EA_B_VERT_CHROMA_PHASE_OFF_10,1, "Task B: Vertical chrominance phase offset '10'"}, {R_EB_B_VERT_CHROMA_PHASE_OFF_11,1, "Task B: Vertical chrominance phase offset '11'"}, {R_EC_B_VERT_LUMA_PHASE_OFF_00,1, "Task B: Vertical luminance phase offset '00'"}, {R_ED_B_VERT_LUMA_PHASE_OFF_01,1, "Task B: Vertical luminance phase offset '01'"}, {R_EE_B_VERT_LUMA_PHASE_OFF_10,1, "Task B: Vertical luminance phase offset '10'"}, {R_EF_B_VERT_LUMA_PHASE_OFF_11,1, "Task B: Vertical luminance phase offset '11'"}, /* second PLL (PLL2) and Pulsegenerator Programming */ { R_F0_LFCO_PER_LINE, 1, "LFCO's per line"}, { R_F1_P_I_PARAM_SELECT,1, "P-/I- Param. Select., PLL Mode, PLL H-Src., LFCO's per line"}, { R_F2_NOMINAL_PLL2_DTO,1, "Nominal PLL2 DTO"}, {R_F3_PLL_INCREMENT,1, "PLL2 Increment"}, {R_F4_PLL2_STATUS,1, "PLL2 Status"}, {R_F5_PULSGEN_LINE_LENGTH,1, "Pulsgen. line length"}, {R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG,1, "Pulse A Position, Pulsgen Resync., Pulsgen. H-Src., Pulsgen. line length"}, {R_F7_PULSE_A_POS_MSB,1, "Pulse A Position"}, {R_F8_PULSE_B_POS,2, "Pulse B Position"}, {R_FA_PULSE_C_POS,2, "Pulse C Position"}, /* 0xfc to 0xfe - Reserved */ {R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES,1, "S_PLL max. phase, error threshold, PLL2 no. of lines, threshold"}, }; #endif