- Improved CAM handling (thanks to Reinhard Walter Buchner for a great deal of help
  in debugging this). It is now possible to insert the CAM in any of the two slots,
  to insert and remove it while VDR is running and even to have two CAMs inserted.
- Turning SI filtering off and on when switching channels.
- Timers are now processed even if an OSD menu is open (except for menus that
  explicitly handle timers).

- Fixed a new/delete malloc/free mismatch in ringbuffer.c (thanks to Stefan
  Huelswitt for reporting this one).
- Improved CAM handling.

- Added 'Hrvatska radiotelevizija' and 'RTV Slovenija' to ca.conf (thanks to
  Paul Gohn).
- Implemented actual user input for CAM enquiry menus.
- Since disk file systems apparently don't honor the O_NONBLOCK flag to read from
  a file in non-blocking mode the cDvbPlayer now uses a non blocking file reader
  class to make sure replay remains smooth even under heavy system load.
- Increased the maximum possible packet size in remux.c to avoid corrupted streams
  with broadcasters that send extremely large PES packets (thanks to Teemu Rantanen).
- Added TS error checking to remux.c (thanks to Teemu Rantanen).
- Modified cRingBufferLinear to avoid excessive memmove() calls in 'Transfer Mode'
  and during recordings, which dramatically reduces CPU load. Thanks to Teemu
  Rantanen for pinpointing the problem with the excessive memmove() calls.
- Updated 'channels.conf' (thanks to Achim Lange).
- Added/improved Swedish language texts (thanks to Jan Ekholm).
- Fixed the description of the "Scroll pages" OSD setup parameter ('yes' and 'no'
  were mixed up).
- Fixed handling the LOG_LOCALn parameters in the -l option (thanks to Dimitrios
  Dimitrakos).
- Changed EIT processing to always read a full section.
- Fixed handling user defined CFLAGS in libdtv/libvdr/Makefile (thanks to Clemens
  Kirchgatterer and Robert Schiele).
- Fixed skipping unavailable channels in the EPG scanner.

- Fixed the 'channels.conf' entries for "Studio Universal" and "Disney Channel".
- Fixed handling channels in the "Channels" menu in case there are ':@nnn' group
  separators without names (thanks to Guy Roussin for reporting this one).
- The SVDRP command CHAN now also accepts channel IDs.
- Increased the timeout until an index file is considerd no longer to be written
  (sometimes in time shift with heavy system load the index file was closed too
  early by the replay thread).
- Implemented "Link Layer" based CAM support, which hopefully will solve the
  problems with CAMs we had in the past. To use this you need the driver version
  2002-01-08 or higher (with the new firmware supporting the "Link Layer" protocol).
- Added an EPG bugfix that moves the Subtitle data to the Extended Description in
  case the latter is empty and the Subtitle exceeds some useful length.
- Since several channels put very long strings into the Subtitle part of their
  EPG data, that string is now limited in length when used in a recording's
  file name.

- Now checking if there is a connection to the keyboard (thanks to Jaakko Hyvätti)
  and only creating the KBD remote control if VDR is running in the foreground.
- Fixed taking an active SVDRP connection into account when doing shutdown (thanks
  to Gregoire Favre for reporting this one).
- Changed setting of CXX and CXXFLAGS variables in Makefile, so that an externally
  defined value will be taken if present (suggested by Robert Schiele).
  Plugin authors should please change the lines

  CXX      = g++
  CXXFLAGS = -O2 -Wall -Woverloaded-virtual

  in their Makefile to

  CXX      ?= g++
  CXXFLAGS ?= -O2 -Wall -Woverloaded-virtual

- Fixed recording overlapping timers on the same channel in case
  DO_REC_AND_PLAY_ON_PRIMARY_DEVICE and/or DO_MULTIPLE_RECORDINGS is not defined
  (thanks to Jaakko Hyvätti).
- No longer stopping/restarting the DMX when switching audio channels (thanks to
  Sven Goethel).
- Fixed high CPU load in 'Transfer Mode' (thanks to Oliver Endriss).
- If a PC keyboard is used as remote control, the string entry fields in the
  menus now accept character input directly (however, this works only for keys that
  are not otherwise defined as remote control keys). Also, plugins can switch the
  cKbdRemote class into "raw mode", where all keyboard input will be made available
  through the new 'kKbd' key code and none of it will be processed as normal remote
  control functions (thanks to Jan Rieger for suggestions and testing).
- Fixed deleting characters in string entry fields in 'insert' mode.
- Now using "Doxygen" to generate source documentation (thanks to Walter Stroebel
  for providing an initial 'Doxyfile' configuration and adjusting some comments).
  See INSTALL for information how to do this. Some function descriptions have
  already been adapted to Doxygen, more will follow.

- The character '|' in description texts of EPG records is now interpreted as a
  newline character (suggested by Gerhard Steiner).
- Updated 'channels.conf.cable' (thanks to Andreas Kool).
- Improved handling of repeated remote keys.
- The RCU now only sets the channel number display when there are no incoming remote
  control keys, which improves reaction on repeated keys.
- The actual tuning is now done in a separate thread, which makes zapping through the
  channels a lot faster and no longer gets stuck on channels that don't broadcast.
  This also makes "Motor-DiSEqC" work (thanks to Reinhard Walter Buchner for his help
  in testing this). Since switching channels now no longer explicitly waits for a
  channel lock in the foreground thread, the "panic level" mechanism is no longer
  used (maybe we don't need it any more, anyway).
- The keyboard is now by default always active to control VDR. The 'make' option
  REMOTE=KBD is therefore obsolete. When compiling VDR with REMOTE=RCU or REMOTE=LIRC,
  the keyboard can thus now be active together with the remote control. If you want
  to build VDR _without_ keyboard support you can set NO_KBD=1 in the 'make' call.
  Since the keyboard codes are now different from the ones used previously (which
  were mapped by the 'ncurses' library) you will need to go through the "Learning
  keys" procedure again. To do so, either delete the file /video/remote.conf or
  remove the KBD.* entries from it before starting this version of VDR.
  (Thanks to Thomas Sailer for pointing out how to set the terminal parameters to
  read from the keyboard).
- The 'ncurses' library is now only necessary when compiling VDR with DEBUG_OSD=1.

- Fixed missing initialization of 'number' in cChannel (thanks to Martin Hammerschmid
  for reporting this one).
- Fixed a misplaced ')' in the fix about the stale lock files (thanks again to
  Oliver Endriss for pointing this out - it was my fault).
- Group delimiters in the 'channels.conf' file that have no text (like a simple ":"
  or ":@201") no longer show up in the Channels menu (suggested by Guy Roussin).
- Added "Tele 5" to 'channels.conf' (thanks to Georg Hitsch).
- Changed the source directory name for plugins from 'SRC' to 'src' (suggested by
  Clemens Kirchgatterer).
- Removed transponders 10788, 11739 and 12266 from 'channels.conf' (apparently they
  are no longer active).
- Deactivated some templates in tools.h in case some plugin needs to use the STL
  (suggested by Gerald Berwolf).
- Timers now accept channel IDs even if the 'source' is 0 (thanks to Stefan Huelswitt
  for reporting this one).
- Now taking an active SVDRP connection into account when doing shutdown or
  housekeeping (suggested by Emil Naepflein).
- Macros in 'keymacros.conf' can now use "@plugin" to directly access the main menu
  function of a given plugin (see man vdr(5) for details).
- The new plugin 'sky' can be used to integrate a Sky Digibox into the VDR system,
  using a Kfir MPEG2 encoder card (see PLUGINS/src/sky/README for details).

- Added new entries to 'ca.conf'.
- Fixed closing unused PID handles (thanks to Stefan Schluenss for reporting this
  one).
- Added more examples to 'diseqc.conf' (thanks to Oliver Endriss).
- Fixed disabling multiple recordings on a single DVB card (comment out the definition
  of the macros DO_REC_AND_PLAY_ON_PRIMARY_DEVICE and DO_MULTIPLE_RECORDINGS in
  dvbdevice.c).
- Plugins can now have their very own OSD setup in the object they return from
  a call to cPlugin::MainMenuAction(). In order to implement this, the return type
  of cPlugin::MainMenuAction() had to be changed from (cOsdMenu *) to (cOsdObject *).
  So in case you are compiling an existing plugin with this version of VDR and you
  get an error message, simply change cOsdMenu to cOsdObject in the plugin's source
  for the MainMenuAction() function.
  Plugin authors who have so far (ab)used the cControl mechanism to implement their
  own raw OSD should take a look at the new demo plugin 'osddemo'. It implements
  a very primitive game that shows how a plugin can have its own raw OSD. Especially
  look into cLineGame and see how it implements the Show() function. See also
  the chapter on "User interaction" in PLUGINS.html.
- Added three new fields to the lines in 'channels.conf': NID, TID and RID. NID and
  TID are the Network and Transport Stream IDs, respectively. RID is an additional ID
  that can be used to tell apart channels that would otherwise be indistinguishable.
  This is typically the case with radio channels, which may have the same NID, TID
  and SID, but different "radio IDs". This new field is therefore called RID ("radio
  ID"). Currently NID and TID are not yet used by VDR and should always be 0. The
  RID is actually used when building the "unique channel ID", so if you have channels
  in your 'channels.conf' file that cause error messages when loading, you can set
  the RIDs of these channels to different values.
  When reading an old 'channels.conf' these new fields will be automatically
  initialized to 0 and once the file is written back to disk they will be appended
  to the channel definitions.
  Thanks to Régis Bossut for pointing out that with some providers the channels can
  only be distinguished through the RID.
- The "unique channel ID" now contains an optional 5th part (the RID). See man vdr(5).
- Updated 'channels.conf.cable' and made some channels unique using the new RID
  (thanks to Andreas Kool for pointing out the problems).
- Made some channels unique in 'channels.conf.terr' using the new RID.
- Extended the '-l' option to allow logging to LOG_LOCALn (n=0..7) by writing, for
  instance, '-l 3.7' (suggested by Jürgen Schmidt).
- Now deleting stale lock files if they have a time stamp that is outside the window
  'now +/- LOCKFILESTALETIME'. This improves things in cases where the system time
  makes far jumps, so that a lock file might end up with a time stamp that lies
  in the distant future (thanks to Oliver Endriss).

- Fixed saving the polarization parameter of channels that have a number in the
  'source' parameter (thanks to Peter Seyringer for reporting this one).
- Updated 'channels.conf.terr' (thanks to Andy Carter).
- Updated 'channels.conf.cable' (thanks to Achim Lange).
- First step towards a "unique channel ID". The channel ID is a human readable
  string, made up from several parameters of the channel's definition in the file
  'channels.conf' (see man vdr(5) for details).
  In order for the "unique channel ID" to work, all channel definitions now must
  be unique with respect to the combination of their Source, Frequency and SID
  parameters. You may have to fix your 'channels.conf' manually if there are error
  messages in the log file when loading it. BE SURE TO MAKE A BACKUP COPY OF YOUR
  'channels.conf' AND 'timers.conf' FILE BEFORE SWITCHING TO THIS VERSION, AND CHECK
  VERY CAREFULLY WHETHER YOUR TIMERS ARE STILL SET TO THE RIGHT CHANNELS!
  When reading an existing 'timers.conf', the channels will be identified as before
  by their numbers. As soon as this file is written back, the channel numbers will
  be replaced by the channel IDs. After that it is possible to manually edit the
  'channels.conf' file and rearrange the channels without breaking the timers.
  Note that you can still define new timers manually by using the channel number.
  VDR will correctly identify the 'channel' parameter in a timer definition and
  use it as a channel number or a channel ID, respectively. Also, the SVDRP commands
  that return timer definitions will list them with channel numbers in order to
  stay compatible with existing applications.
  The channel ID is also used in the 'epg.data' file to allow EPG information from
  different sources to be stored, which would previously have been mixed up in case
  they were using the same 'service ID'. Note that the contents of an existing
  'epg.data' file from a previous version will be silently ignored, since it doesn't
  contain the new channel IDs. When inserting EPG data into VDR via SVDRP you now also
  need to use the channel IDs.
  Currently the EPG data received from the DVB data stream only uses the 'Source'
  and 'Service ID' part of the channel ID. This makes it work for channels with
  the same service IDs on different sources (like satellites, cable or terrestrial).
  However, it doesn't work yet if the service IDs are not unique within a specific
  source. This will be fixed later.
- Added missing SID parameters to 'channels.conf'. Some channels have been removed
  since they are apparently no longer broadcasted.
- Removed dropping EPG events from "other" streams that have a duration of 86400
  seconds or more (was introduced in version 1.1.10). This has become obsolete by
  the modification in version 1.1.13, which fixed fetching the current/next information
  to handle cases where the duration of an event is set wrongly and would last beyond
  the start time of the next event. Besides, the change in 1.1.10 broke handling EPG
  data for NVOD channels.
- Fixed a compiler warning regarding cMenuChannels::Del() and MenuTimers::Del() hiding
  the base class virtual functions.

- Completely switched to the new CVS HEAD version of the linux-dvb driver.
  The NEWSTRUCT compile time switch is now obsolete. The required driver is now
  the CVS HEAD version dated 2002-11-01 or later.
- Adjusted the INSTALL file to the 1.1.x version.
- Only accepting key presses from the current remote control when learning (thanks to
  Oliver Endriss).
- Fixed the EPG scanner, which broke 'Transfer Mode' as soon as it kicked in
  (thanks to Oliver Endriss for reporting this one).
- Fixed handling audio tracks in cDvbDevice.
- Updated channels.conf.terr (thanks to Uwe Scheffler).
- Fixed displaying the group separators in the channel display (thanks to Martin
  Hammerschmid for pointing out this one).
- The Makefile now includes the file Make.config (if present in the VDR source
  directory), which allows the user to overwrite several settings with individual
  values (suggested by Andreas Schultz). The VDR distribution archive does not
  contain this file in order to not overwrite a user defined file. There is a
  Make.config.template which contains the default values of the macros the user
  can overwrite.
- Since there have been changes to the 'newplugin' script authors of plugins
  may want to newly create their plugins' Makefiles with the new version of this
  script, and adapt them to their individual needs (make sure you don't overwrite
  your existing plugin directory - make a backup copy first!).
- Fixed reading EPG data via the SVDRP command PUTE (it changed the current
  service ID).
- Fixed closing all dup'ed file descriptors in cPipe.
- Implemented a plugin interface for additional audio processing (see PLUGINS.html
  under "Dolby Digital").
  The functionality of the '-a' command line option has been reactivated.
  Since the author doesn't have any Dolby Digital equipment this may or may not
  work as expected. There may still be some places where a call to cAudios::Clear()
  or cAudios::Mute() is necessary. Those with Dolby Digital equipment should please
  take a look at this and maybe send patches.
  Replaying Dolby Digital in ways other than through VDR's '-a' option will have to
  be implemented as plugins. Those who have written patches for VDR version 1.0.x
  should convert their work into the proper plugins for version 1.1.x.
  Note to authors of cPlayer derived plugins: please read the modified comments
  in device.h regarding the member functions cDevice::Clear(), cDevice::Mute() and
  cDevice::PlayAudio(). Derived classes must call these base class member functions
  to make sure all registered cAudio objects are properly handled. Also note that
  the return type of cDevice::PlayAudio() has been changed to 'void', since this
  function always has to accept the entire data block immediately and there is
  nothing that could be reasonably done in case an error occurs in one of the
  cAudio objects.
- Now checking the driver's DVB_API_VERSION in dvbdevice.h. Since VDR now requires
  a driver dated 2002-11-01 or later the MIN_DVB_DRIVER_VERSION_FOR_TIMESHIFT and
  DVB_DRIVER_VERSION stuff has been replaced with DO_REC_AND_PLAY_ON_PRIMARY_DEVICE,
  which can be used to disable simultaneous recording and replaying on the primary
  DVB device in case there are problems with this.