- Fixed resetting the EPG data versions after changing the preferred languages
  (thanks to Teemu Rantanen for reporting this one and helping to debug it).
- Added LinkageDescriptor handling to 'libsi' (thanks to Marcel Wiesweg).
- Added Russian language texts (thanks to Vyacheslav Dikonov).
  Plugin authors may want to add the new entries to their I18N texts and contact
  the translators to have their texts translated. Note that there are now 17
  different OSD languages, so please make sure you have 17 versions for each of
  your texts.
- Some corrections and additions to the Finnish OSD texts (thanks to Rolf
  Ahrenberg and Niko Tarnanen).
- Fixed a wrong 'delta' value in the call to the shutdown script (thanks to
  Stephan Epstein for reporting this one).
- Activated detection of radio channels (to avoid reports about "channels not
  being detected that used to be detected with the 'scan' utility or the
  original 'autopid' patch ;-).
- Channels with a zero VPID no longer write a PPID into channels.conf.
- Short channel names are now only stored if they actually differ from the
  full name.
- The EPG scan now scans newly found transponders together with already existing
  ones.
- The "Red" button in the "Setup/EPG" menu can now be used to force an EPG
  scan on a single DVB card system (see MANUAL for details).
- The new SVDRP command 'SCAN' can be used to force  an EPG scan on a single
  DVB card system (see MANUAL under Setup/EPG for details).
- Fixed handling PID changes in 'Transfer Mode'.
- Excess blanks in channel names read from the SDT are now removed.
- Fixed wrong parameter settings when scanning NITs for terrestrial transponders
  (thanks to Christian Tramnitz for pointing out this one).
- Fixed some out of bounds parameter settings when scanning NITs for cable
  and satellite transponders.
- Added 'libsi' include files to the 'include' directory, so that plugins can
  use them (thanks to Marcel Wiesweg).
- Now only processing NITs that contain the transponder they are actually
  broadcast on.
- Fixed setting the source type for newly detected terrestrial transponders
  (thanks to Christian Tramnitz for his support in debugging this).

- Fixed a lockup in the EPG scanner when no non-primary device was available
  (thanks to Martin Holst for reporting this one).
- Fixed a compiler warning about virtual cConfig::Load() functions (thanks to
  Lauri Tischler for reporting this one).
- Fixed a warning about character comparison in libsi/si.c (thanks to Lauri
  Tischler for reporting this one).
- The new parameter "Update channels" in the "Setup/DVB" menu can be used to
  control if and how channels will be automatically updated (see MANUAL).
  This has already been part of the 'autopid' patch by Andreas Schultz and has
  now been adopted.
- Fixed a crash in case there is no DVB hardware present (thanks to Sascha
  Volkenandt for reporting this one).
- Changed calculation of channel ids to make it work for tv stations that use
  the undefined NID value 0 (thanks to Teemu Rantanen for reporting this one).
- Enhanced the SDT filter to handle multi part sections.
- Added support for selecting preferred EPG languages (based upon a patch by
  Teemu Rantanen).
- Fixed a 'const' in libsi/si.h (thanks to Marcel Wiesweg).
- Fixed the 'su' call in 'runvdr' to make it work on systems that require the
  user name to appear before the command option (thanks to Robert Huitl).
- Fixed testing for matching section filters in case they are turned off (thanks
  to Marcel Wiesweg).
- In case of incomplete sections an error message is now logged only every 10
  seconds.
- Fixed a possible NULL pointer access in cEITScanner::Process() (thanks to
  Andreas Kool).
- The actual transponder data is now taken from the NIT and existing channels
  are adjusted if necessary. If the NIT contains new transponders, they are
  scanned for channels during the next EPG scan. Note that only the satellite
  branches are tested, cable and terrestrial need to be tested by somebody who
  actually has such equipment.

- Changed thread handling to make it work with NPTL ("Native Posix Thread Library").
  Thanks to Jon Burgess, Andreas Schultz, Werner Fink and Stefan Huelswitt.
- The cThread class now accepts a 'Description' parameter, which is used to log
  the beginning and end of the thread, together with its process and thread id.
  For descriptions that need additional parameters you can use the function
  cThread::SetDescription(), which accepts 'printf()' like arguments.
  Existing plugins that use threads should be changed to use this functionality
  instead of explicit 'dsyslog()' calls inside their Action() function in order
  to support logging the thread ids.
- Added "Slovak Link" and "Czech Link" to 'ca.conf' (thanks to Emil Petersky).
  However, 'ca.conf' is now pretty much obsolete due to the automatic CA handling.
- Mutexes are now created with PTHREAD_MUTEX_ERRORCHECK_NP, which makes the
  'lockingTid' stuff obsolete (thanks to Stefan Huelswitt).
- Changed font handling to allow language specific character sets.
- Adopted the small font character set from the "Elchi" patch (originally
  provided by Alessio Sangalli).
- Greek language texts now use iso8859-7 character set (thanks to Dimitrios
  Dimitrakos).
- Rearranged section data handling, so that the actual data handling can be done
  separately, even from within plugins.
- The EPG data structures have been moved from eit.[hc] to epg.[hc] and have been
  adapted to the general VDR coding style. Plugins that use these data structures
  may need to change some function names (which should be obvious).
  The name 'subtitle' has been changed to 'shortText' to avoid clashes with actual
  subtitles that are part of a movie. The name 'extendedDescription' has been
  shortened to 'description'.
- Replaced 'libdtv' with 'libsi' (thanks to Marcel Wiesweg), which is thread
  safe and can be used by multiple section filters simultaneously.
- Added 'cRwLock' to 'thread.[hc]'. Note that all plugin Makefiles need to
  define _GNU_SOURCE for this to work (see the example plugin Makefiles and
  'newplugin').
- Fixed a problem with crc32 in SI handling on 64bit systems (thanks to Pedro
  Miguel Sequeira de Justo Teixeira for reporting this one).
- Fixed an alignment problem in CAM access on 64bit systems  (thanks to Pedro
  Miguel Sequeira de Justo Teixeira for reporting this one).
- Added 'StreamType' setting to CAM communication, which is important for
  Aston/SECA CAMs (thanks to Antonino Sergi).
- Now the CA descriptors are sent to the CAM in the 'program' or 'ES level'
  sections, depending on where they are found in the PMT (thanks to Hans-Peter
  Raschke for reporting this one). This should make SkyCrypt CAMs work.
- Now using the 'version number' of EPG events to avoid unnecessary work.
- Channel data is now automatically derived from the DVB data stream (inspired
  by the 'autopid' patch from Andreas Schultz).
- The current channel is now automatically re-tuned if the PIDs or other settings
  change. If a recording is going on on a channel that has a change in its
  settings, the recording will be stopped and immediately restarted to use the
  new channel settings.
- EPG events now use the complete channel ID with NID, TID and SID.
- Channel names in 'channels.conf' can now have a short form, as provided
  by some tv stations (see man vdr(5)). Currently channels that provide short
  names in addition to long ones are listed in the OSD as "short,long name",
  as in "RTL,RTL Television". The short names will be used explicitly later.
- The Ca parameter in 'channels.conf' has been extended and now contains all the
  CA system ids for the given channel. When switching to a channel VDR now tests
  for a device that provides one of these CA system ids. The devices automatically
  get their supported ids from the CI handler.
- The values in 'ca.conf' are currently without any real meaning. Whether or not
  a channel with conditional access can be received is now determined automatically
  by evaluating its CA descriptors and comparing them to the CA system ids
  provided by the installed CAM. Only the special values 1-16 are used to assign
  a channel to a particular device.
- Increased the maximum number of possible OSD colors to 256.
- Limited the line length in the EPG bugfix report, which appears to fix a buffer
  overflow that caused a crash when cleaning up the EPG data (at 05:00 in the
  morning).

- Fixed handling Priority -1 in cDvbDevice::ProvidesChannel() (thanks to
  Torsten Herz).
- Fixed processing EPG data in case there is no title (thanks to Torsten Herz).

- Added cDevice::GetSTC() (suggested by Sven Goethel).
- Added Asia-Pacific satellites to 'sources.conf' (thanks to Richard Scobie).
- Added North American satellites to 'sources.conf' (thanks to Luke Jenkins).
- Fixed getting the list of recordings in case VDR is started from a directory
  where it doesn't have access to (thanks to Dirk Mueller).

- Fixed handling CAM menus in case the CAM connection fails while the menu
  is being presented (thanks to Thomas v. Keller for reportign this one).
- Added missing 'const' to some cChannel member functions (thanks to Torsten
  Herz).

- Updated the required driver version in INSTALL (thanks to Jens Groth for
  reporting this one).
- Fixed missing channel info after an incomplete channel group switch (thanks
  to Andreas Trauer).
- Fixed handling a channels.conf that contains a ":@nnn" line as its last entry
  (thanks to Ralf Klueber).
- Fixed detecting the /dev/videoN devices for GRAB in case there are others
  before the DVB devices (thanks to Andreas Kool).
- Updated 'channels.conf.terr' for Berlin (thanks to Markus Hardt).
- Fixed handling rc key learning in case cRemote::Initialize() returns 'false'
  (thanks to Oliver Endriss).
- Fixed initializing the highlight area in cDvbSpuDecoder (thanks to Sven Goethel).
- Now trying to get a timer's channel without RID when loading 'timers.conf'
  (thanks to Thomas Rausch).
- Removed the unused 0x73 (TOT) filter in eit.c (thanks to Andreas Trauer).
- Fixed extracting the ES data in cDvbDevice::StillPicture() (thanks to Stefan
  Huelswitt).
- Added MPEG1 handling to cDvbDevice::StillPicture() (thanks to Thomas
  Heiligenmann).
- Changed the default "Lifetime" to 99, which means that recordings will
  never be deleted automatically in case the disk runs full (suggested by
  Oliver Endriss). Note that in an existing VDR installation the current
  value as set in 'setup.conf' will still be used - this change only affects
  new VDR installations.
- Edited recordings will now never be deleted automatically if the disk runs
  full (suggested by Emil Naepflein).
- Channel IDs are now checked when reading 'channels.conf' to avoid later
  problems with timers.

- Fixed dropping out of replay mode while viewing a recording that is still
  going on (thanks to Oliver Endriss for reporting and helping to debug this
  one).
- Fixed handling ':' characters in channel names when reading channels.conf
  (thanks to Reinhard Nissl for reporting this one).
- Fixed the URL to the 'Doxygen' tool in INSTALL (thanks to Dirk Essl).
- Removed the obsolete chapter "Stopping a recording on the primary DVB interface"
  from MANUAL.
- Completed Dutch language texts (thanks to Hans Dingemans).
- Made 'diseqc.conf' a required file only if Setup.DiSEqC is activated (thanks to
  Thomas Schmidt).
- VDR now starts up even if 'keymacros.conf' references a plugin that is currently
  not loaded (suggested by Alexander Wetzel).
- Fixed checking for VIDEO_STREAM_S in cRemux::SetBrokenLink() (thanks to Oliver
  Endriss).
- Added 'repeat' function to keys '7' and '9' ("jump to mark") in replay mode
  (suggested by Oliver Endriss).
- Made cOsdMenu::Display() virtual, which allows plugins to do some additional
  processing after calling the base class function (suggested by Jan Rieger).
- Updated 'ca.conf' (thanks to Marco Franceschetti).

- Updated VIVA, VIVA Plus, MTV Central and MTV 2 in channels.conf (thanks to
  Sebastian Frei).
- Changed "Studio Universal" to "Sci-Fi" in channels.conf.
- Fixed a crash when using the --terminal option without having access to the
  given terminal (thanks to Steffen Barszus for helping to debug this one).
- Added a note about the driver version needed for the still picture fix from
  version 1.2.5pre1 to work properly (thanks to Oliver Endriss for pointing
  this out).
- Fixed setting the primary device in case none of the devices provides an MPEG
  decoder (thanks to Rene Bartsch for reporting this one).
- Fixed handling the "Red" button in the "Schedules" menu in case there are no
  events listed for a particular channel (thanks to Christoph Hermanns for
  reporting this one).
- When setting an editing mark while in "Pause" mode, replay now immediately
  jumps to the marked frame (thanks to Oskar Signell for pointing out this
  problem).
- The DVB devices no longer send CA descriptors to the CAM while the EPG scanner
  is active (sometimes the CAMs got irritated when the device tuned to channels
  they couldn't handle).

- Now explicitly handling exit value 0 and 2 in 'runvdr'.
- Added a missing 'w' to the allowed characters for Finnish and Swedish (thanks
  to Lauri Tischler and Ragnar Sundblad).
- Added channels for DVB-T Hannover (Germany) to channels.cont.terr (thanks to
  Peter Waechtler).
- Fixed a hangup in SVDRP when the client disappears without sending QUIT (thanks
  to Robert Bartl for reporting this one). The problem was introduced in version
  1.2.2 through the fix for an occasional "Broken pipe" error in SVDRP connections.
- Updated 'channels.conf.terr' for Berlin.
- Fixed displaying still pictures, now using the driver's VIDEO_STILLPICTURE call
  directly (thanks to Oliver Endriss). This also improves navigating through DVD
  menus with the DVD plugin. If this causes problems with your particular system
  (maybe because you are using the 'analogtv' plugin) you can reactivate the
  previous behaviour by commenting out the line
  #define VIDEO_STILLPICTURE_WORKS_WITH_VDR_FRAMES
  in VDR/dvbdevice.c.
  Note that you need driver version 2003-08-23 or later for this to work!
- Fixed handling extra blanks in plugin command lines.
- Actually implemented the SVDRP command DELC.
- Now clearing the player device if there are too many poll timeouts in 'Transfer
  Mode', which avoids buffer overflows and black screens in such cases.