- Replaced the "quick workaround for additional live audio PIDs" in
  cDvbDevice::SetChannelDevice() with an actual solution in
  cDvbDevice::SetAudioTrackDevice() in order to prevent sticky PIDs in CAMs,
  which caused long switching times or completely blank screens when switching
  between encrypted channels on the same transponder (reported by Tomas Berglund).
- Adapted cThread::ThreadId() to recent kernels (thanks to Ville Skyttä).
- Added --remove-destination to the 'cp' command for binaries in the Makefile to
  avoid a crash in case a new version is installed on a running system (suggested
  by Petri Hintukainen).
- Fixed handling "Ca Info" in case the CAM sends this again if the smart card is
  replaced with a different one.

- Fixed the PremiereContentTransmissionDescriptor in 'libsi' (thanks to Stefan
  Huelswitt).
- Removed all the compatibility '#if APIVERSNUM...' stuff and instead increased
  the API version number - plugins will have to be recompiled.
- Removed the call to pthread_setschedparam(childTid, SCHED_RR, 0) in thread.c,
  because it caused a compiler warning with post-2.4 glibc (reported by Ville Skyttä).
  Since the third parameter has to be non-null to have any effect, the call was
  presumably a NOP, anyway.
- Fixed the 'clean-plugins' target in the Makefile to also remove additional
  plugin libraries (thanks to Wayne Keer).
- Applied the fixes to moving and deleting channels from version 1.4.0-2 to the
  SVDRP commands MOVC and DELC as well.
- Fixed handling the display of the '*' indicator in the "What's on now/next?"
  menu, so that events that haven't been "seen" in the data stream within 30
  seconds won't be shown as "running".
- Fixed handling tabbed item display in 'skincurses'.
- Increased the column spacing in the "Recordings" menu (was too small for the
  'skincurses' plugin).
- When the 'skincurses' plugin is loaded, it automatically sets the 'curses'
  skin as the current one. This doesn't modify the Setup.OSDSkin parameter, so
  that after using 'skincurses' (for instance for debugging) the previously
  selected skin will be used again.
- Added some log messages when setting the current skin.
- Only making a second attempt to set the current skin at startup if the first
  attempt has failed.
- Now switching to non-VPS timers' channels 60 seconds before the timer starts
  (if a free device is available), to allow for the updating of EPG data and CA
  descriptors before the actual recording starts.

- Removed leftover LSMOD=... line from 'runvdr'.
- Modified the Makefile to copy additional libraries a plugin might provide (suggested
  by Wayne Keer). See PLUGINS.html for details.
- Fixed handling Transfer Mode when replaying Dolby Digital audio and the option
  '-a' was given (based on a patch from Werner Fink). To avoid having to increment
  the API version, several #if checks have been introduced around this. These will
  be removed once the API version actually needs to be incremented.
- Fixed deleting the 'skinDescriptions' in cMenuSetupOSD::~cMenuSetupOSD() (thanks
  to Tobias Grimm).
- Fixed calculating the start time of repeated timers with "first day" (thanks to
  Udo Richter).
- Now setting a timer's cached start time to 0 after a call to Skip() (thanks to
  Udo Richter).
- Fixed handling the running status of EPG events in case the "Schedule" menu is
  currently open (i.e. a write lock on the schedules data can't be achieved).
- Fixed handling VPS timers in case the EPG event hasn't been 'seen' in a while.
- Fixed calculating the cache size in cUnbufferedFile::Read() (thanks to Artur Skawina).
- Removed -fPIC from VDR's and libsi's Makefile (suggested by Prakash Punnoor).
- Modifed the device selection to better handle timer conflicts (reported by
  Christian Wieninger).
- Avoiding a compiler warning in libsi's TypeLoop::operator[].
- Now processing the "frequency list descriptor" (based on a patch from Anssi Hannula).
- Improved the repeat function for LIRC remote controls (thanks to Joerg Riechardt).
- Fixed moving channels, which sometimes stopped the current replay session
  (reported by Mirko Dölle).
- Fixed deleting channels in case the current channel's number changes (reported
  by Mirko Dölle).

- Fixed initializing 'noapiv' in the Makefile (reported by Ronny Kornexl).
- Fixed extracting APIVERSION to work with older versions of 'sed' (reported by
  Oliver Endriss; thanks also to Udo Richter for a shorter version of the 'sed'
  expression).
- Fixed broken APIVERSION extraction line in 'newplugin' (thanks to Oliver Endriss).
- Fixed entering '0' in a cMenuEditIntItem (reported by Mirko Dölle).
- Updated the Italian OSD texts (thanks to Nino Gerbino).
- Added a note about adding 'INCLUDES += -I$(DVBDIR)/include' to an existing
  Make.config (problem reported by Markus Ehrnsperger).
- Fixed handling the cPluginManager::Active() result when pressing the "Power" key
  (reported by Werner Färber).
- Added a hint about commenting out the line '#define USE_FADVISE' in tools.c in
  case of problems with replaying in fast forward mode if the video directory is
  mounted via a Samba share (reported by Andy Grobb).
- Changed the "Really restart?" prompt in the call to cPluginManager::Active() in
  menu.c to "restart anyway?" (suggested by Rolf Ahrenberg).
- Removed the obsolete "'1' for encrypted radio channels" part from the description
  of the VPID in vdr.5 (reported by Alexander Hans).
- Fixed tuning to the channel of a VPS timer if the device is the actual device.

- Updated the GPL copies (thanks to Ville Skyttä).
- Fixed several spelling errors (thanks to Ville Skyttä).
- Updated the Polish OSD texts (thanks to Jaroslaw Swierczynski).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Updated the French OSD texts (thanks to Pierre Briec).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
- Updated the Slovenian OSD texts (thanks to Matjaz Thaler).
- Fixed wrong credits for the patch that was used to implement cPlugin::Active().
- Simplified the 'grep|awk|sed' command to retrieve the VDR/APIVERSION to a single
  'sed' call.
- Updated the Swedish OSD texts (thanks to Tomas Prybil).
- Modified the German OSD texts to be "less technical" (thanks to Andreas Brachold).
- Extended the version number reported with the '-V' option to also show the
  current APIVERSION (suggested by Thomas Günther).
- Fixed handling empty titles in cEvent::FixEpgBugs() (reported by Rolf Ahrenberg).
- Fixed some missing '-' in the German OSD texts (thanks to Walter Koch).
- Added an error message about plugins that don't honor APIVERSION in their Makefile
  (based on a suggestion by Udo Richter).
- Fixed a format string in recording.c to avoid a compiler warning on 64bit systems
  (thanks to Christian Wieninger for reporting, and Werner Schweer for pointing out
  that the 'z' modifier should be used here).
- Ignoring k_Repeat when deciding whether the same key has been pressed in string
  input fields (based on a patch from Marko Mäkelä).

- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed a crash when setting the time transponder in the Setup menu, caused by the
  new 'noneString' in cMenuEditChanItem (reported by Thomas Günther).
- Added NULL checks to some strdup() calls in menuitems.c (suggested by Darren
  Salt).
- Removed the unnecessary 'value' member from cMenuEditItem.
- Fixed the initial setting of the time transponder setup parameter (reported
  by Thomas Günther).
- Fixed unnecessary Set() calls in cMenuEditIntItem::ProcessKey().
- Allowing a tolerance for symbol rate values that are off by one (thanks to
  Richard Lithvall).
- Added VBITeletextDescriptorTag, TeletextDescriptorTag, LocalTimeOffsetDescriptorTag
  and PremiereContentTransmissionDescriptor to 'libsi' (thanks to Marco Schlüßler).
- Using geteuid() to check whether VDR is running as user 'root' (suggested by
  Tobias Grimm).
- Added a missing "Key$" in skincurses.c (reported by Darren Salt).
- Reintroduced the log message "deleting plugin: ..." when shutting down VDR (upon
  request by Ville Skyttä, as in the initial patch from Christoph Haubrich).
- Fixed the vdr.1 man page (a single DVB card can record and do live tv).
- The preferred audio language is now automatically selected when starting replay.
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- The new function cPlugin::Active() can be used by a plugin to indicate that it
  is still busy and the system should not shut down or restart (based on a patch
  from Sascha Volkenandt). See PLUGINS.html for details.
- Fixed setting the 'Delta' parameter when calling the shutdown script with
  no active timer (reported by Helge Lenz).
- In order to make sure that plugins are compiled with the same DVB driver header
  files as VDR itself, the definition of DVBDIR has been removed from the VDR
  Makefile. If you are using a driver version that has its header files at a location
  other than /usr/include/linux/dvb, you can define DVBDIR in the Make.config
  file (see also INSTALL). Note that if you already have a Make.config file of your
  own, you should add the lines

  ifdef DVBDIR
  INCLUDES += -I$(DVBDIR)/include
  endif

  to its end, as in the new Make.config.template.
  Any reference to DVBDIR should be removed from all plugins' Makefiles, like this:

  ------------------------------------------------------------
  --- PLUGINS/src/hello/Makefile  2005/11/11 13:20:14     1.10
  +++ PLUGINS/src/hello/Makefile  2006/04/15 11:58:46     1.11
  @@ -20,7 +20,6 @@

   ### The directory environment:

  -DVBDIR = ../../../../DVB
   VDRDIR = ../../..
   LIBDIR = ../../lib
   TMPDIR = /tmp
  @@ -40,7 +39,7 @@

   ### Includes and Defines (add further entries here):

  -INCLUDES += -I$(VDRDIR)/include -I$(DVBDIR)/include
  +INCLUDES += -I$(VDRDIR)/include

   DEFINES += -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
  ------------------------------------------------------------

  Thanks to Marco Schlüßler for pointing out this problem.
- Implemented kNext and kPrev keys (based on a patch from Peter Juszack).
  See MANUAL for details.
- Implemented kChanPrev (from a patch from Darren Salt).
- The "Update channels" parameter in the "Setup/DVB" menu has been extended to
  allow updating only the PIDs (see MANUAL for details). When updating to this
  version of VDR, please verify that the setting is as you want it to be, because
  the values have been shifted.
- The new APIVERSION (see config.h) now allows existing compiled plugins to be
  used with newer versions of VDR, as long as there have been no changes to the
  VDR header files since the last APIVERSION. Existing plugins' Makefiles should
  have all references to VDRVERSION changed to APIVERSION, like this:

  ------------------------------------------------------------
  --- PLUGINS/src/hello/Makefile  2006/04/15 11:58:46     1.11
  +++ PLUGINS/src/hello/Makefile  2006/04/16 09:03:50     1.12
  @@ -28,9 +28,9 @@

   -include $(VDRDIR)/Make.config

  -### The version number of VDR (taken from VDR's "config.h"):
  +### The version number of VDR's plugin API (taken from VDR's "config.h"):

  -VDRVERSION = $(shell grep 'define VDRVERSION ' $(VDRDIR)/config.h | awk '{ print $$3 }' | sed -e 's/"//g')
  +APIVERSION = $(shell sed -ne '/define APIVERSION/s/^.*"\(.*\)".*$$/\1/p' $(VDRDIR)/config.h)

   ### The name of the distribution archive:

  @@ -67,7 +67,7 @@

   libvdr-$(PLUGIN).so: $(OBJS)
          $(CXX) $(CXXFLAGS) -shared $(OBJS) -o $@
  -       @cp $@ $(LIBDIR)/$@.$(VDRVERSION)
  +       @cp $@ $(LIBDIR)/$@.$(APIVERSION)

   dist: clean
          @-rm -rf $(TMPDIR)/$(ARCHIVE)
  ------------------------------------------------------------
- If a timer is newly created from within the "Schedule" menu, and its event is
  already running or has its start time within the next two minutes, it now goes
  directly into the "Edit timer" menu in order to allow the user to make further
  changes to timer parameters before the actual recording starts (inspired by
  Christian Wieninger's "epgsearch" plugin).
- Added format check to syslog_with_tid().
- Updated the INSTALL file's section about non-VDR files in the video directory
  (since version 1.3.38 disk access is done in a separate thread, so the watchdog
  timer won't hit).
- Changed the behaviour of the "Use small font" setup option to *always* use the small
  font if set to '2' - even if it would have been a fixed font (suggested by Ronny
  Kornexl).
- No longer using characters 0x01 and 0x02 for mapping single quote and slash in
  recording names (thanks to Patrick Fischer for reporting that this was a problem
  with XML). The single quote is not mapped at all, and the slash is interchanged
  with the tilde. Existing recordings will be handled like before, so there is
  no need to actually rename them.
- The cRemote::CallPlugin() function now has a boolean return value that tells
  the caller whether initiating the plugin call was successful (suggested by
  Reinhard Nissl). If it returns false, another plugin call is currently pending
  and the caller should try again later. This also means that the SVDRP command
  PLUG can now return an error code is the call fails.
- The new function cPlugin::MainThreadHook() can be used by plugins to perform
  actions in the context of the main program thread. Use this function with great
  care and only of you absolutely have to! See also PLUGINS.html.

- Removed leftover 'needsBufferReserve' variable from cTransfer (thanks to Marco
  Schlüßler).
- Fixed setting "No title" for broken event data (reported by Ronny Kornexl).
- Fixed channel up/down switching on single card systems (reported by Stefan
  Huelswitt).
- Fixed handling "pending" timers that blocked others that actually could record
  (reported by Thomas Koch).
- Speeded up cVideoRepacker (thanks to Reinhard Nissl).
- Added an 'Id' parameter to cDevice::PlayAudio() to allow plugins to easier
  process the audio data (thanks to Marco Schlüßler).
- Added Czech language texts (thanks to Vladimír Bárta).
  Plugin authors may want to add the new entries to their I18N texts and contact
  the translators to have their texts translated. Note that there are now 21
  different OSD languages, so please make sure you have 21 versions for each of
  your texts.
- Updated the Polish OSD texts (thanks to Jaroslaw Swierczynski).
- Fixed auto advance in string entry fields when pressing Up/Down in insert mode
  (reported by Udo Richter).
- Fixed handling the "Setup/OSD/Menu button closes" option when set to 'yes' in
  case a replay is active (thanks to Udo Richter).
- Improved cUnbufferedFile; USE_FADVISE is now defined in tools.c by default, so
  if you don't want to use "fadvise" you need to comment out that line (thanks to
  Artur Skawina).
- Fixed a missing ',' in the Swedish OSD texts (thanks to Arthur Konovalov).
- cDevice::Transferring() can now be used to determine whether the (primary)
  device is currently playing in Transfer Mode (based on a suggestion by
  Reinhard Nissl).
- The 'runvdr' script no longer uses the $VDRUSR environment variable to set
  the user id under which 'vdr' shall run. Just add the '-u username' option
  when you call 'runvdr'.
- Fixed multiple entries of the same subdirectory in the "Recordings" menu
  (reported by Christian Jacobsen).
- Enabled generating a core dump if VDR is run with a different user id (thanks
  to Ville Skyttä).
- Fixed handling the "Blue" key in the "Schedule" menu for the current channel
  (thanks to Rolf Ahrenberg).
- Renamed the Makefile target 'plugins-clean' to 'clean-plugins' (suggested by
  Sebastian Frei).
- Made all font and image data 'const' (thanks to Darren Salt).
- Fixed scrolling with Up/Down in case there are non-selectable items at the
  beginning or end of the menu (reported by Helmut Auer).
- Added cSkin::GetTextAreaWidth() and cSkin::GetTextAreaFont(), so that a plugin
  that wants to do special text formatting can do so (thanks to Alexander Rieger).

- EPG events from epg.data or SVDRP's PUTE command now have their Title set to
  "No Title" if none was set.
- Fixed checking toFile in cCuttingThread::Action() (found in a larger patch from
  Artur Skawina).
- Fixed a crash when pressing '0' in the "Schedule" menu on a channel that doesn't
  have any EPG data (reported ny Alexander Hans).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Fixed a missing ',' in the Greek OSD texts (thanks to Arthur Konovalov).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Fixed handling the tfRecording flag when reading timers (bug reported by Andreas
  Mair).
- Now checking whether the channel exists before setting the PMT filter in
  cPatFilter::Process() (thanks to Thomas Bergwinkl).
- Now trying to reestablish the connection to the LIRC daemon in case it breaks
  (thanks to Ville Skyttä).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed channel switching with the Down (Up) key in case the current channel is
  already the first (last) in the list (reported by Frank Krömmelbein).
- Removed the "buffer reserve" in Transfer Mode - it's no longer necessary with
  recent driver/firmware versions.
- The epg.data file is now written when VDR exits (suggested by Daniel Karsubka).
- Fixed cTimers::GetNextActiveTimer() so that it won't return an expired timer
  (reported by Rolf Ahrenberg).
- Changed DVBS_TUNE_TIMEOUT and DVBC_TUNE_TIMEOUT to 9000ms to avoid problems with
  channels that have low symbol rates (reported by Suur Karu).
- Fixed displaying the current audio track in the channel display.
- When reading epg.data (or data from PUTE), the version number of events with
  table IDs smaller than 0x50 is now ignored because otherwise the current
  running status would not be set after a restart of VDR.
- Implemented a timeout for remote controls that don't deliver "repeat" keypresses
  very fast (based on a suggestion by Luca Olivetti; problem with the new handling
  of k_Repeat keypresses in channel switching reported by Udo Richter).
- When looking for the present or following EPG event, the running status is now
  always taken into account.
- Now initializing the channels' schedule pointers when reading the epg.data file,
  so that the first WhatsOn menu will come up faster.
- If a shutdown is requested, but the shutdown script doesn't actually halt the
  system, it is now tried again after 5 minutes (suggested by Helmut Auer).
- Separated the 'install' target into several individual targets; renamed the
  'plugins-install' target to 'install-plugins' (thanks to Helmut Auer).

- The SVDRP command LSTT now accepts the new option 'id' to have the channels
  of the timers listed with their unique channel ids instead of their numbers
  (suggested by Matthias Schniedermeyer).
- Added a missing #include <linux/unistd.h> to thread.c (thanks to Ville Skyttä).
- Fixed the "plugins-clean" and "plugins-install" targets in the Makefile (thanks
  to Andreas Brachold).
- Fixed handling "more than 3 byte" key sequences in cKbdRemote::ReadKeySequence()
  (thanks to Peter Bieringer). If you are using the PC keyboard as remote control
  input you may need to make VDR newly learn the keys by removing the remote.conf
  file.
- To avoid problems with access rights when VDR shall run as 'root' it now skips
  all SetCaps() and SetUser() calls when it is started as 'root' and "-u root"
  is given.
- Added missing i18n entry for the "Timer" button (thanks to Ville Skyttä)
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Making the "Menu" key behave consistently has not been well received by several
  users, so the new option "Setup/OSD/Menu button closes" can be used to get the
  old behavior back (which also is the default value of this option).
- Dropped the default vdr user. The program now always runs under the user id
  it was started from, unless the '-u' option is given and it was started from
  the 'root' user. If you want to have a default vdr user, you can activate and
  adjust the "VDR_USER = vdr" line in your Make.config file (from the original
  patch by Ludwig Nussel).
- Key macros can now be defined for all non-modeless keys (suggested by Mirko Dölle).
- Adjusted the "KEY MACROS" section of vdr.5 to the new plugin calling mechanism
  introduced in version 1.3.32.
- Removed the now obsolete "ca.conf" section from vdr.1 (thanks to Ville Skyttä).
- Added missing description of L and R circular polarization to 'diseqc.conf'.
- Added a note about "modprobe capability" to INSTALL (suggested by Patrick Cernko).
- Fixed canonicalizing the file name in the SVDRP command GRAB to allow full path
  names (thanks to Stefan Huelswitt).
- Added a missing '-' to the example for viewing a grabbed image on a remote host
  (reported by Philippe Gramoullé).
- Made the "What's on now/next?" menus a lot faster by storing a pointer to each
  channel's schedule in the cChannel data.
- Made the log messages regarding lost lock of devices "info" instead of "error"
  (suggested by Andreas Brachold).
- The SVDRP command GRAB allows file names without extension again (suggested by
  Stefan Huelswitt).
- Pressing '0' in the "Schedule" menu now rotates through displaying "This event on
  this channel", "This event on all channels" and "All events on all channels".
  This can be used to find reruns of a given show, or the episodes of a series.
  Note that if there are many channels in your channels.conf, displaying the
  "All events on all channels" page may take a while.
- The status markers in the "Schedule" menu are now only updated if a submenu is
  closed in which a timer has been modified, which speeds up closing submenus.
- Now only writing Dolby Digital tracks into the 'info.vdr' file of a recording
  if Setup.UseDolbyDigital is true (suggested by André Weidemann).
- Added a leading '0' to the day in the DayDateTime() function (thanks to Rolf
  Ahrenberg).
- No longer displaying color buttons in the recording info menu if it has been
  invoked from a player (reported by Jürgen Schilling).

- Fixed handling second audio and Dolby Digital PIDs for encrypted channels
  (was broken in version 1.3.37).
- Improved TS/PES conversion to better handle lost TS packets (thanks to
  Reinhard Nissl).
- Limited the frequency of log messages from the cRepackers.
- Now using the gettid() syscall to get a thread's pid, so that we get a
  useful value on NPTL systems (suggested by Johannes Stezenbach).
- Fixed the RCU remote control handling to avoid problems with NPTL (thanks
  to Andreas Share for reporting a lockup with the RCU on NPTL systems).
- When displaying the amount of free disk space, the space consumed by
  recordings that have been "deleted" but not yet actually "removed" is now
  taken into account (suggested by Christian Vogt).
- Now avoiding unnecessary disk access when checking if there are deleted
  recordings that need to be removed (reported by Carsten Koch).
- Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now
  a deleted recording is retained at least DELETEDLIFETIME seconds before
  actually removing it.
  The value of DELETEDLIFETIME has been changed to 300. So after (possibly
  inadvertently) deleting a recording, there will be at least 5 minutes
  in which it can be recovered (unless a new recording immediately requires
  the disk space). The count starts again at 0 every time VDR is started.
- Fixed a possible crash when displaying the "Low disk space!" message from
  a background thread (thanks to Christof Steininger).
- Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler).
- Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground
  and background threads won't interfere.
- The main menu now dynamically updates its contents in case an instant
  recording or replay stops, etc.
- The version number of EPG events is now also stored in the epg.data file
  (thanks to Kendy Kutzner).
- EPG events that are no longer in the currently broadcasted data stream are
  now automatically deleted.
- Removed an invalid access to Event->schedule in cSchedule::DelEvent().
- Modified cSchedule::Cleanup() (events are always sorted by time).
- Schedules are now cleaned up once every hour (not only at 05:00).
- The "Schedule" and "What's on now/next?" menus are now updated if a timer
  is set or modified.
- cTimer no longer has its own 'schedule' member, it rather uses that of the
  event it has been set to.
- The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus
  now immediately creates a timer for the selected event and marks it with 'T'.
  If the event is already marked with 'T', the "Red" button opens the "Edit
  timer" menu for that timer.
- Removing deleted recordings is now done in a separate thread.
- Dropped the unused "stop recording on primary interface" stuff.
- Converting a grabbed image to JPEG is now done with the new function
  RgbToJpeg() (see tools.h).
- The SVDRP command GRAB now determines the image type (JPEG or PNM) from the
  extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit
  'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but
  has no meaning any more.
- The function cDevice::GrabImage() no longer writes the grabbed image to a
  file, but rather returns a pointer to the image in memory. The wrapper
  function cDevice::GrabImageFile() can be used to write the grabbed image
  directly to a file. Plugins that used the old version of cDevice::GrabImage()
  need to be adapted to the new interface.
- The new class cBase64Encoder (see tools.h) can be used to encode data in
  base64 (thanks to Bob Withers for publishing his Base64 class).
- The SVDRP command GRAB now writes the image data to the SVDRP connection
  (encoded in base64) if the given file name consists of only the file
  extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file
  name (based on a suggestion from Darren Salt).
  A simple way of viewing a grabbed image on a remote host is:

  svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display -

- The new command line option '-g' must be given if the SVDRP command GRAB
  shall be allowed to write image files to disk. The parameter to this option
  must be the full path name of an existing directory, without any "..", double
  '/' or symlinks. By default, or if "-g- is given, grabbing to files is
  not allowed any more because of potential security risks.
- Modified the way the SVDRP command GRAB writes the grabbed image to a file
  to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino
  Peña):
  + The file handle is now opened in a way that it won't follow symbolic links
    (suggested by Darren Salt).
  + The given file name is now canonicalized, so that it won't contain any
    ".." or symlinks (suggested by Darren Salt).
  + Grabbing to files is limited to the directory given in the the command
    line option '-g'. By default grabbing to files is not allowed any more.
- Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos).
- Changed all "illegal" to "invalid" in error messages (there's nothing "illegal"
  in VDR ;-).
- When started as user 'root' VDR now switches to a lesser privileged user id,
  keeping the capability to set the system time (based on a patch from Ludwig
  Nussel). By default the user id 'vdr' is used, which can be changed through
  the new command line option '-u'. Note that for security reasons VDR will no
  longer run as user 'root' (unless you explicitly start it with '-u root',
  but this is not recommended!). The 'runvdr' script has been changed to
  use the '-u' option.
- Changed the API of the functions cStatus::Recording() and cStatus::Replaying(),
  so that they can provide the full file name of the recording. Plugins that use
  these (or the related cStatus::Msg...() functions) need to be adapted
  (suggested by Andreas Brugger).
- The DVB devices now retune (and, if applicable, resend the DiSEqC data) if
  the lock is lost (based on a patch from Reinhard Nissl).
- Fixed handling multi byte key sequences in cKbdRemote (based on a patch from
  Jürgen Schneider).
- Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco
  Schlüßler).
- Made the static cControl functions thread safe (thanks to Patrick Fischer).
- Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid
  warnings with g++ 4.1.0 (thanks to Ville Skyttä).
- Fixed incrementing the 'state' variables in the repacker classes in remux.c
  to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä).
- The Makefile now reports a summary of failed plugins (thanks to Udo Richter).
- The cTimer constructor can now take an optional cChannel (suggested by
  Patrick Fischer).
- Fixed setting the main thread id if VDR is running as a daemon.
- Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl).
- Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner).
- Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger).
- Now using FE_READ_STATUS to read the current frontend status (suggested by
  Holger Wächtler).
- The "Menu" key now behaves consistently. If there is anything on the OSD, it
  is closed when the "Menu" key is pressed, and if there is nothing on the OSD,
  the "Menu" key opens the main menu (suggested by Luca Olivetti).
- The new option "Setup/OSD/Timeout requested channel info" can be used to turn
  off the automatic timeout of the channel display in case it was invoked by
  a press of the "Ok" key (suggested by Thiemo Gehrke).
- A message is now given when an instant recording is started (suggested by
  Helmut Auer). Actually the code was already there, just commented out - don't
  remember why it wasn't active...
- Removed an obsolete "Summary" text from i18n.c and preceded all key definition
  texts with "Key$" to avoid duplicates (reported by Lucian Muresan).
- Preceded all button texts with "Button$".
- Removed obsolete "Eject", "Language" and "scanning recordings..." texts.
- Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill).
- Disabled the use of "fadvise" in cUnbufferedFile because there have been
  several reports that it causes more problems than it solves (suggested by
  Petri Hintukainen). If you want to use "fadvise", you can activate the line
  //#define USE_FADVISE
  in tools.c.
- Removed unused 'offset' member from cOsdItem.
- In the "Channels" menu the numeric keys now position the cursor to the channel
  with the given number (see MANUAL, section "Remote Control Keys", note (3) for
  details).
- The "Mark/Move" function in the "Channels" menu now also works in the non-numeric
  sort modes.
- The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if
  this is a menu.
- The new "Info" key brings up information on the currently viewed programme
  or recording. For a live programme this is the same as "Schedule/Ok", i.e. the
  description of the current EPG event. For a recording this is the same as shown
  by the "Info" button in the "Recordings" menu. Plugins that implement players
  can overwrite their cControl::GetInfo() function to show their own info (see
  PLUGINS.html for details). Pressing the "Info" key again while the info is
  displayed will close the OSD. In order to assign this new key to an existing
  remote control setup, the remote.conf file needs to be deleted and VDR has
  to be restarted to go through the process of learning the remote control keys.
- Any cReceivers still attached to a cDevice when that device switches to a
  different transponder are now automatically detached (suggested by Patrick
  Fischer).
- The "flags" of a timer are now handled as an unsigned integer value. In order
  to do this, the interface of cMenuEditBitItem also had to be changed.
- In string entry fields (like, e.g., the file name of a recording) the characters
  can now be entered by pressing the numeric keys, the same way as on a
  telephone keypad (based on the "Easy Input" patch from Marcel Schaeben).
- Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch
  from "single shot" to "weekly", followed by the "Right" key (reported by
  Andreas Böttger).
- The file 'ca.conf' is obsolete and has been removed.
- Revised all descriptions regarding CICAM.
- Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling.
- Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack()
  (thanks to Reinhard Nissl).
- Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo
  Schneider).
- Cleaned up some trailing white space.