- Improved the VDR Makefile to avoid a warning if the '.dependencies' file does
  not exist, and also using $(MAKE) to call recursive makes.
- Changed the name of the 'package' target in the plugin Makefiles to 'dist'
  (following the suggestions in the "GNU Make" manual). If you already have started
  a plugin project, you may want to change this in your Makefile accordingly.
- Improved the plugin Makefile to avoid a warning if the '.dependencies' file does
  not exist, and also using $(shell...) to get the version numbers. If you already have
  started a plugin project, you may want to change this in your Makefile accordingly.
- Fixed some function headers to make them compile with gcc 3.x (thanks to
  Gregoire Favre).
- Fixed the cutting mechanism to make it re-sync in case a frame is larger than the
  buffer (thanks to Sven Grothklags).
- Added an error message if the directory specified in the '-L' option can't be
  accessed (suggested by Stefan Huelswitt).
- Rearranged OSD class names to make 'cOsd' available for the main OSD interface.
- Completely moved OSD handling out of the cDvbApi class, into the new cOsd.
- Implemented cStatus to allow plugins to set up a status monitor.
  See PLUGINS.html for details.
- Moved the cEITScanner out of dvbapi.h/.c, into the new eitscan.h/.c.
- Added Swedish language texts (thanks to Tomas Prybil).
- Fixed parsing 'E' records in epg2html.pl (thanks to Matthias Fechner for pointing
  out this one).
- Removed compiler option '-m486' to make it work on non-Intel platforms. If you
  have already started a plugin project, you may want to make sure you remove this
  option from your existing Makefile.
- Completely rearranged the recording and replay functions to make them available
  to plugins.
- Replay is now done in a single thread (no more syncing between input and output
  thread necessary).
- It is now possible to record several channels on the same transponder with "budget
  cards". VDR automatically attaches a recording timer to a card that already
  records on the appropriate transponder. How many parallel recordings can actually
  be done depends on the computer's performance. Currently any number of recordings
  gets attached to a card, so you should carefully plan your timers to not exceed
  the limit. On a K6-II/450 it was possible to record three channels from transponder
  12480 with a single WinTV NOVA-S.
- Timers that record two successive shows on the same channel may now overlap and
  will use the same DVB card. During the time where both timers record the data
  is simply saved to both files.
- The following limitations apply to this version:
  + Transfer mode doesn't work yet.
  + The '-a' option (for Dolby Digital audio) doesn't work yet.
  + Switching between different language tracks doesn't work yet.
  + Cutting doesn't work yet.

- Changed the cPlugin::Start() function to return a boolean value that indicates
  if the plugin will not be able to perform its task (suggested by Stefan Huelswitt).
- Added the cPlugin::Housekeeping() function (suggested by Stefan Huelswitt).
- Updated channels.conf.cable (thanks to Uwe Scheffler).
- Added 'insert' capabilities to cList (suggested by Stefan Huelswitt).
- Changed the 'package' target in the plugin's Makefile to produce a package that
  expands to a directory with just the plugin name and version number (suggested
  by Stefan Huelswitt).
- Made the config directory available to plugins (suggested by Stefan Huelswitt).
  See PLUGINS.html, section "Configuration files" for details.
- Improved the [eid]syslog() macros, so that the LOG_... macros don't need to be
  given any more.

- Begin of the 1.1 development branch. THIS IS NOT A STABLE VERSION!
  The current stable version for every day use is still the 1.0 branch.
- First step towards a universal plugin interface. See the file PLUGINS.html
  for a detailed description. The man page vdr(1) describes the new options '-L'
  and '-P' used to load plugins. This first step implements the complete "outer"
  shell for plugins. The "inner" access to VDR data structures will follow.
- The VDR version number is now displayed in the title line of the "Setup" menu.

- Fixed a problem with wrong EPG data in the Schedules menu (thanks to Tobias
  Kerner, problem was initially reported by Michel Moster, but somehow I had
  misplaced his message...).
- Added Spanish language texts (thanks to Ruben Nunez Francisco).
- Fixed resetting the "First day" timer parameter once the timer actually starts
  recording.
- Fixed the still picture workaround in case the progress display is active
  (thanks to Gerald Raaf).
- Fixed a problem with accessing the epg.data file before it is fully written
  (thanks to Thilo Wunderlich for reporting this one).
- Now the EPG scan skips channels that have their 'Ca' parameter explicitly set
  to an other DVB card (suggested by Sergei Haller).
- Fixed a possible hangup when reading a broken epg.data file (thanks to Henning
  Holtschneider for pointing this one out).
- Fixed a bug in the editing process in case a previously edited file with the
  same name was manually deleted on a system with more than one video directory
  (thanks to Dirk Wiebel for reporting this one).

- Fixed restoring CICAM setup values for a fourth DVB card (thanks to Klaus Wolf).
- Completed internationalization of OSD texts (thanks to Hannu Savolainen,
  Arnold Niessen, Paulo Lopes, Jean-Claude Repetto, Alberto Carraro, Matjaz
  Thaler and Truls Slevigen).
- Improved file I/O in case of EINTR, which may occur e.g. with heavy system
  load (thanks to Werner Fink).
- Now writing the title of a recording into the 'summary.vdr' file.
- Workaround for displaying still frames with the unpatched LinuxDVB driver
  (if anybody ever finds out why the unpatched driver doesn't display VDR's
  still frames, please let me know).
- When executing a command from the "Commands" menu, the title of that command
  is now immediately shown in the status line (followed by "...") to give the
  user some feedback that the command is being executed, which is especially
  important if this takes some time.
- Fixed scrolling the "Channels" menu in case the cursor ends up on a group
  delimiter (thanks to Bernd Zierath for helping to debug this one).
- Added manual pages vdr(1) and vdr(5) (which made the FORMATS file obsolete).
- New command command line option '-V' to display the VDR version.
- Adjusting column width for channel numbers in case there are more than 999
  channels.
- Checking the return value of '...FileRady...' calls in dvbapi.c for better
  performance under heavy system load.
- New 'make' target 'install', which copies the manual pages and executables
  to their appropriate system locations and creates the /video directory if
  it doesn't exist yet.
- Automatic hotkey assignment is now suppressed if the first entry in
  commands.conf starts with a digit in the range '1'...'9', followed by a blank.
- Fixed a bug in switching back the replay mode display in time shift mode
  (thanks to Achim Lange for reporting this one).
- Fixed a bug in the 'First day' timer parameter for timers that record over
  midnight.
- Added units to Setup parameters.
- Changed time entry in the 'Jump' command during replay, so that it is filled
  up from right to left.
- Now using statfs() to determine the amount of free disk space, which avoids
  the use of an external 'df' command (thanks to Ruben Nunez Francisco).
- Fixed skipping the next hit of a repeating timer (thanks to Rainer Zocholl
  for reporting this one).
- Fixed a bug when a timer records over midnight of a day that had a change in
  Daylight Saving Time.
- Added Polish language texts (thanks to Michael Rakowski).
- Fixed a bug in parsing group separators in channels.conf (thanks to Henning
  Holtschneider for reporting this one).
- Changed the default 'Ok' key when using the PC keyboard from '5' (in the
  numeric block) to 'Enter', because the '5' key didn't work on keyboards with
  the F-keys on top.
- Fixed a bug in the EPG bugfix mechanism if the extended description is shorter
  than 3 characters (thanks to Andreas Schultz).

- Added 'Ca' code 201 for 'Cryptoworks, GOD-DIGITAL' to 'ca.conf' (thanks to
  Bernd Schweikert).
- Fixed avoiding the primary DVB interface in case Setup.PrimaryLimit is 0.
- Fixed handling CICAM settings if the first one of a DVB card was FTA.
- Fixed reacting on changes in CICAM settings (needed to restart VDR before).
- The "Blue" button in the "Main" menu now works as "Stop" button if a recording
  is currently being replayed.
- New command line option '-m' to mute audio of the primary DVB device at
  startup (suggested by Mirko Günther).
- The new SVDRP command VOLU can be used to control the audio volume (suggested
  by Mirko Günther).
- Fixed resetting 'mute' state when setting the volume to a non-zero value.
- Added log messages when deleting recordings in case the disk runs full while
  recording.
- Fixed closing a pipe (used for replaying Dolby Digital audio), which
  sometimes left 'zombie' processes behind (thanks to Werner Fink for helping
  to debug this one).
- Now starting the Dolby Digital output thread only if the recording actually
  contains Dolby Digital audio data (thanks to Werner Fink).
- Implemented OSD for Volume and Mute (works only if there is no other OSD
  activity, but this should be no problem for normal use).
- Changed the MANUAL description of the "Conditional Access" setup parameters
  to reflect the actual "CICAM DVBn m" notation in the "Setup" menu.
- The new Setup parameter "Use time from transponder" can be used to define which
  transponder shall be used to set the system time (see MANUAL for details).
  If you have been using the SetSystemTime option previously, you now MUST
  select a channel that you trust to have a reliable time base.
- Grouped the Setup parameters into several sub-menus, so that each group of
  parameters fits on a single screen - unless the height of the OSD has been
  set to a small value (based on code from Markus Lang).
- Changed the title of the "Main" menu to "VDR".
- Fixed displaying a system message while the replay mode is being shown.
- Physically removing a deleted recording if one with the same name shall be
  deleted again.
- The "Left" and "Right" keys are now used to page up and down in text displays
  (like the EPG descriptions or the results of commands executed from the
  "Commands" menu).
- Fixed high CPU usage in transfer mode.
- Replaced 'killproc' with 'killall' in 'runvdr', since apparently 'killproc'
  is not available by default on some Linux distributions, whereas 'killall' is.
  Please check if your system provides 'killall' - if it doesn't, please change
  this back in 'runvdr' and report this (thanks to Achim Lange).
- The "Commands" menu now automatically assigns number keys as hotkeys to the
  commands. If you have preceeded your commands with digits you may want to
  remove these from your 'commands.conf' file.
- The new Setup item "Restart" can be used to force a complete restart of VDR,
  including reloading the driver. Note that this can only work if VDR and the
  driver are wrapped into a mechanism that actually performs this action if VDR
  exits. The 'runvdr' script can be used for this purpose.
- Refined texts of the "Setup" menu.

- Fixed parsing 'E' records in epg2html.pl.
- Fixed a deadlock when switching channels via Schedule/Now|Next/Switch (reported
  by Martin Hammerschmid).
- Changed the meaning of the 'Ca' parameter in 'channels.conf'. Each channel can
  now define which decryption method it needs in order to be accessed. The new
  configuration file 'ca.conf' contains the defined values, and the default
  'channels.conf' has been modifed to contain the new values for 'Premiere World'
  and 'ORF'. If you use the default 'channels.conf' and have the conditional
  access hardware to receive encrypted channels, please make sure you copy the
  file 'ca.conf' into your /video directory (or wherever your configuration files
  are located) and go into the "Setup" menu and set the CICAM values according
  to your hardware setup. Currently there are two possible CICAM entries per
  DVB card, so any card can implement up to two different conditional access
  modes (besides the default "Free To Air" mode, which is always assumed to be
  available on any DVB card).
- Updated French language texts (thanks to Jean-Claude Repetto).

- Added scanning for EPG data for another 4 days on channels that support this
  (thanks to Oleg Assovski).
- Removed '#define VFAT 1' from recording.c (was a leftover from testing).
- Fixed the "Low disk space!" message (thanks to Sergei Haller).
- Added the TPID to Hessen-3 in 'channels.conf' (thanks to Sergei Haller).
- Fixed a crash when replaying with DEBUG_OSD=1 (thanks to Stefan Huelswitt).
- Implemented the "First day" parameter for repeating timers. See FORMATS for
  information about the enhanced 'timers.conf' file format, and MANUAL for
  a description of the new item in the "Edit Timer" menu and the enhanced
  functionality of the "Blue" button in the "Timers" menu.
- When deleting a recording that is currently still being recorded, the related
  timer will now automatically be terminated. If this is a repeating timer, it
  will receive a "First day" setting that skips the timer for this day.
- Fixed closing all unused file descriptors when opening a pipe (thanks to
  Werner Fink).
- Instant recordings now take the EPG data from the point in time at 5 minutes
  from the start time of the recording. In order for this to work the 'active'
  parameter of a timer now uses the second bit to indicate that this is an
  "instant" recording (see FORMATS for details).
- Fixed the SVDRP GRAB command in case the video device can't be opened (thanks
  to Adrian Stabiszewski).
- At startup the data written into 'epg.data' is now read into the EPG data
  structures. In order for this to work, the 'E' record has been extended to
  (optionally) contain the 'table ID' (see FORMATS for details).
- The new SVDRP command PUTE can be used to put EPG data into the EPG list.
  See FORMATS for details about the required data format.
- Taking the German umlauts 'as is' when compiled with VFAT.
- The new Setup parameter RecordDolbyDigital can be used to generally turn off
  recording the Dolby Digital audio channels in case you want to save disk space
  or don't have the equipment to replay Dolby Digital audio.
- Reading the 'setup.conf' file no longer terminates in case of an error, but
  rather attempts to read the rest of the file.
- Removed DVD support from the core VDR source, since the current version from
  Andreas Schultz is already much further developed (DVD menu navigation) and
  the concept of "additional players" in VDR is going to change in version 1.1.0,
  where a new "plugin" interface shall allow the easy implementation of new
  players without having to patch the core VDR source. Until then, Andreas has
  agreed to provide his DVD support as a completely external patch.
- The contents of the distribution archive now contains the directory name with
  the current version number, as in 'vdr-1.0.0pre1/...' in order to avoid
  inadvertently overwriting an existing VDR directory with a new version.
- Added a missing error message in SVDRP command LSTC in case the given channel
  can't be found.

- Updated channel settings for 'N24' (thanks to Andreas Gebel).
- Fixed handling hierarchical recordings menu in case of directories starting
  with the same sequence of characters.
- Fixed handling timers on the 29th, 30th or 31st of a month in case the next
  month has less than 31 days.
- Added a description of the sort order of individual episodes in the
  recordings menu to the MANUAL.
- Removed the EPG bugfix for "Title / Subtitle" cleanup. Apparently Pro-7 has
  finally stopped this nasty habit.
- Added some EPG bugfix statistics (printed to the log file every time the EPG
  data is cleaned up and when VDR is terminated). Maybe somebody in charge of
  the EPG data at the listed channels will read this and take the necessary
  actions to fix these things...
- Changed the [dei]syslog macros in tools.h to use a variable number of args,
  thus making it safe to use them in nested 'if/else' statements.
- Fixed error handling in establishing an SVDRP connection (thanks to Davide
  Achilli) for pointing this out).
- The new configuration file 'svdrphosts.conf' is now used to define which
  hosts may access the SVDRP port (by default only 'localhost' has access).
  See FORMATS for details.
- The special keywords TITLE and EPISODE can now be used in timer file names
  (see MANUAL and FORMATS for details).
- The new setup parameter NameInstantRecord can be used to define how an
  instant recording will be named (see MANUAL for details).
- When looking for the EPG record of the timer that starts a recording, now
  that record is taken which covers the time calculated as
  'start + (Setup.MarginStart * 2) + 1)' in order to have a better chance of
  hitting the right record in case of an instant recording. Timers that start
  further in the future should always be programmed via the "Schedules" menu.
- The special VPIDs '0' and '1' are now used to enable recording radio channels.
  Actually '0' should be enough, but '1' must be used with encrypted channels
  (driver bug?). Note, though, that since VDR is mainly a *video recorder*, some
  features like, e. g.,  the progress display, may not work as expected with
  radio recordings. Thanks to Michael Paar.
- Fixed a problem with the ERR macro defined by ncurses.h (thanks to Artur
  Skawina).

- Fixed setting the OSD size in the 'Confirm' interface call (thanks to
  Deti Fliegl).
- Removed the 'read incomplete section...' error message in the EIT processor.
- Fixed channel data for "DW TV" (thanks to Axel Gruber).
- Added DPID to "PREMIERE MOVIE 1" in channels.conf.cable (thanks to Stephan
  Schreiber).
- Prepared the OSD functions for multiple overlapping windows.
- Removed the check to see whether the system time is running linearly.
- Improved performance of SVDRP command entry.
- Removed EPGBugfixLevel '3' - after more than a year Pro-7 finally managed to
  broadcast the correct timestamps for EPG events between 0:00 and 6:00!
- Fixed failing watchdog timer if program hangs in OSD activities (thanks to
  Carsten Koch).
- No longer requiring 'libncurses' if compiling without DEBUG_OSD=1 and
  REMOTE=KBD (thanks to Lauri Pesonen).
- The "Recordings" menu now displays a hierarchical structure if there are
  subdirectories for the recordings. This can be controlled through the
  "RecordingDirs" parameter in the "Setup" menu.
  See "MANUAL/Replaying a Recording" for details.
- Improved speed of setting the Help button texts.
- Fixed handling file names that contain single quotes (') or dollar signs ($)
  in the call to the shutdown command (option '-s') and the recording command
  (option '-r').
- Improved error handling in the editing process; the resulting file will be
  deleted if an error occured.
- A message is now prompted at the end of the editing process, indicating
  whether the process succeeded or failed.
- Fixed setting the LastActivity timestamp after a shutdown prompt (thanks to
  Sergei Haller).
- A message is now prompted if free disk space becomes low during recording.
- The editing process now calls AssertFreeDiskSpace() to remove deleted
  recordings if the disk becomes full.
- The "Main" menu now displays in its title the used disk space (in percent)
  and the estimated free disk space (in hh:mm), assuming a data rate of 30 MB
  per minute.
- Activating the "Recordings" menu now displays "scanning recordings..." to
  give the user some feedback in case this takes longer.
- Status messages are now displayed centered.
- Removed the 'Tools' subdirectory from the VDR archive. All contributed tools
  can now be found at ftp://ftp.cadsoft.de/pub/people/kls/vdr/Tools.