- Fixed updating the "Info" button in the "Timers" menu.
- Reduced the number of events to actually check when setting events to timers.
- cMenuEditIntItem now checks the given value and forces it to be between the
  given min and max limits.
- The status changes of EPG events are now logged for all channels that have timers.
- Removed the log message "deleting plugin: ..." when shutting down VDR (thanks to
  Christoph Haubrich for reporting that this is irritating when calling "vdr --help").
- Fixed cReadLine::Read() for lines that end with the infamous "\r\n" (thanks to
  Rolf Ahrenberg).
- Fixed cDvbDevice::SetAudioBypass() in case setTransferModeForDolbyDigital is false
  (thanks to Werner Fink).
- Updated 'sources.conf' (thanks to Oleg Roitburd).
- Fixed the shutdown timeout (thanks to Alexander Wenzel).
- Only calling RemoveEmptyVideoDirectories() once in case a recording has been
  deleted (reported by Hardy Flor).
- Fixed deleting recordings that have been removed externally when running out of
  disk space (reported by Jan Lenz).
- Fixed handling repeating VPS timers (they stopped recording too early).
- Timer log messages now show "VPS" if this is a VPS timer.
- Fixed getting the present EPG event in case none is currently 'running' (it
  then returns the one that just ended).
- Fixed calling a plugin's main menu function while a message is being displayed
  (reported by Helmut Auer).
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
- Made cMenuRecordings::GetRecording() 'protected' (suggested by Marius Heidenstecker).
- Speeded up cRemux::ScanVideoPacket() (thanks to Reinhard Nissl).
- Enhanced logging EPG event data.
- Fixed format string handling (thanks to Darren Salt).
- The new function cDevice::ForceTransferMode() can be used to force the primary
  device into transfer mode (thanks to Reinhard Nissl).
- The 'version' of EPG events is now ignored when reading EPG data from 'epg.data'
  or via SVDRP/PUTE to avoid problems with double EPG events.
- The 'running status' of EPG events is now only set to SI::RunningStatusNotRunning
  for events before the present event.
- Fixed some #include sequences.
- Single shot VPS timers are now only considered 'expired' if their associated
  EPG event has been explicitly set to SI::RunningStatusNotRunning.
- The check for timers to be deleted is now done only every 30 seconds.

- Removed an unnecessary toFile->SetReadAhead() from cutter.c (thanks to Artur
  Skawina).
- The "Back" key now restores the original string when pressed while editing a
  string item (suggested by Markus Hahn).
- Now stopping scanning the video directory if there are too many levels of
  symbolic links, which might indicate a recursive link loop (based on a patch
  from Helmut Auer).
- Improved OSD area handling in cDvbSpuDecoder (thanks to Marco Schlüßler).
- Now logging the description (if present) in case a thread is canceled (suggested
  by Marco Schlüßler).
- cMenuText now uses the given font (thanks to Rolf Ahrenberg).
- The ST:TNG skin now uses the fixed font if requested when displaying texts.
- Fixed some typos in the CONTRIBUTORS file (thanks to Frank Krömmelbein).
- Changed offset and size handling in 'libsi' from 'unsigned' to 'signed', so that
  overflows can be better detected (thanks to Marcel Wiesweg).
- Checking data size in CaDescriptor::Parse() and LinkageDescriptor::Parse() of
  'libsi' to avoid crashes with invalid data (thanks to Marcel Wiesweg).
- Made CharArray::DataOwnData::assign() in 'libsi' more robust against invalid
  data (suggested by Oliver Endriss). Also changed CharArray::DataOwnData::Delete()
  so that it sets 'size' and 'data' to 0.
- Now resetting the channel number if the number entered through the numeric keys
  exceeds the maximum channel number (thanks to Rolf Ahrenberg).
- The language code in the 'X' component records of EPG data can now consist of
  two codes, separated by '+'.
- If a recording starts and there is no EPG data available for the recorded channel,
  the 'X' audio component records for the 'info.vdr' file are now generated from the
  channel's PID data.
- Externally provided EPG data (with table ID 0x00) now gets its component
  descriptors set from the broadcast data, so that language codes and descriptions
  are available (suggested by Andreas Brugger).
- When setting the audio track descriptions, the language codes are now also set
  in case this is a replay session (based on a patch from Rolf Ahrenberg).
- If a recording starts and the channel's audio PID data has more language code
  information than the EPG's component data, the code from the channel is taken.
- Fixed handling DPID when deciding whether to switch to 'Transfer Mode' (thanks
  to Marco Schlüßler).
- Fixed replaying recordings of radio channels with many audio tracks (thanks to
  Reinhard Nissl).
- Added a comment to tChannelID::nid, explaining that is is actually the "original"
  network id.

- EPG events from epg.data or SVDRP's PUTE command now have their Title set to
  "No Title" if none was set.
- Fixed checking toFile in cCuttingThread::Action() (found in a larger patch from
  Artur Skawina).
- Fixed a crash when pressing '0' in the "Schedule" menu on a channel that doesn't
  have any EPG data (reported ny Alexander Hans).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Fixed a missing ',' in the Greek OSD texts (thanks to Arthur Konovalov).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Fixed handling the tfRecording flag when reading timers (bug reported by Andreas
  Mair).
- Now checking whether the channel exists before setting the PMT filter in
  cPatFilter::Process() (thanks to Thomas Bergwinkl).
- Now trying to reestablish the connection to the LIRC daemon in case it breaks
  (thanks to Ville Skyttä).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed channel switching with the Down (Up) key in case the current channel is
  already the first (last) in the list (reported by Frank Krömmelbein).
- Removed the "buffer reserve" in Transfer Mode - it's no longer necessary with
  recent driver/firmware versions.
- The epg.data file is now written when VDR exits (suggested by Daniel Karsubka).
- Fixed cTimers::GetNextActiveTimer() so that it won't return an expired timer
  (reported by Rolf Ahrenberg).
- Changed DVBS_TUNE_TIMEOUT and DVBC_TUNE_TIMEOUT to 9000ms to avoid problems with
  channels that have low symbol rates (reported by Suur Karu).
- Fixed displaying the current audio track in the channel display.
- When reading epg.data (or data from PUTE), the version number of events with
  table IDs smaller than 0x50 is now ignored because otherwise the current
  running status would not be set after a restart of VDR.
- Implemented a timeout for remote controls that don't deliver "repeat" keypresses
  very fast (based on a suggestion by Luca Olivetti; problem with the new handling
  of k_Repeat keypresses in channel switching reported by Udo Richter).
- When looking for the present or following EPG event, the running status is now
  always taken into account.
- Now initializing the channels' schedule pointers when reading the epg.data file,
  so that the first WhatsOn menu will come up faster.
- If a shutdown is requested, but the shutdown script doesn't actually halt the
  system, it is now tried again after 5 minutes (suggested by Helmut Auer).
- Separated the 'install' target into several individual targets; renamed the
  'plugins-install' target to 'install-plugins' (thanks to Helmut Auer).

- The SVDRP command LSTT now accepts the new option 'id' to have the channels
  of the timers listed with their unique channel ids instead of their numbers
  (suggested by Matthias Schniedermeyer).
- Added a missing #include <linux/unistd.h> to thread.c (thanks to Ville Skyttä).
- Fixed the "plugins-clean" and "plugins-install" targets in the Makefile (thanks
  to Andreas Brachold).
- Fixed handling "more than 3 byte" key sequences in cKbdRemote::ReadKeySequence()
  (thanks to Peter Bieringer). If you are using the PC keyboard as remote control
  input you may need to make VDR newly learn the keys by removing the remote.conf
  file.
- To avoid problems with access rights when VDR shall run as 'root' it now skips
  all SetCaps() and SetUser() calls when it is started as 'root' and "-u root"
  is given.
- Added missing i18n entry for the "Timer" button (thanks to Ville Skyttä)
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Making the "Menu" key behave consistently has not been well received by several
  users, so the new option "Setup/OSD/Menu button closes" can be used to get the
  old behavior back (which also is the default value of this option).
- Dropped the default vdr user. The program now always runs under the user id
  it was started from, unless the '-u' option is given and it was started from
  the 'root' user. If you want to have a default vdr user, you can activate and
  adjust the "VDR_USER = vdr" line in your Make.config file (from the original
  patch by Ludwig Nussel).
- Key macros can now be defined for all non-modeless keys (suggested by Mirko Dölle).
- Adjusted the "KEY MACROS" section of vdr.5 to the new plugin calling mechanism
  introduced in version 1.3.32.
- Removed the now obsolete "ca.conf" section from vdr.1 (thanks to Ville Skyttä).
- Added missing description of L and R circular polarization to 'diseqc.conf'.
- Added a note about "modprobe capability" to INSTALL (suggested by Patrick Cernko).
- Fixed canonicalizing the file name in the SVDRP command GRAB to allow full path
  names (thanks to Stefan Huelswitt).
- Added a missing '-' to the example for viewing a grabbed image on a remote host
  (reported by Philippe Gramoullé).
- Made the "What's on now/next?" menus a lot faster by storing a pointer to each
  channel's schedule in the cChannel data.
- Made the log messages regarding lost lock of devices "info" instead of "error"
  (suggested by Andreas Brachold).
- The SVDRP command GRAB allows file names without extension again (suggested by
  Stefan Huelswitt).
- Pressing '0' in the "Schedule" menu now rotates through displaying "This event on
  this channel", "This event on all channels" and "All events on all channels".
  This can be used to find reruns of a given show, or the episodes of a series.
  Note that if there are many channels in your channels.conf, displaying the
  "All events on all channels" page may take a while.
- The status markers in the "Schedule" menu are now only updated if a submenu is
  closed in which a timer has been modified, which speeds up closing submenus.
- Now only writing Dolby Digital tracks into the 'info.vdr' file of a recording
  if Setup.UseDolbyDigital is true (suggested by André Weidemann).
- Added a leading '0' to the day in the DayDateTime() function (thanks to Rolf
  Ahrenberg).
- No longer displaying color buttons in the recording info menu if it has been
  invoked from a player (reported by Jürgen Schilling).

- Fixed handling second audio and Dolby Digital PIDs for encrypted channels
  (was broken in version 1.3.37).
- Improved TS/PES conversion to better handle lost TS packets (thanks to
  Reinhard Nissl).
- Limited the frequency of log messages from the cRepackers.
- Now using the gettid() syscall to get a thread's pid, so that we get a
  useful value on NPTL systems (suggested by Johannes Stezenbach).
- Fixed the RCU remote control handling to avoid problems with NPTL (thanks
  to Andreas Share for reporting a lockup with the RCU on NPTL systems).
- When displaying the amount of free disk space, the space consumed by
  recordings that have been "deleted" but not yet actually "removed" is now
  taken into account (suggested by Christian Vogt).
- Now avoiding unnecessary disk access when checking if there are deleted
  recordings that need to be removed (reported by Carsten Koch).
- Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now
  a deleted recording is retained at least DELETEDLIFETIME seconds before
  actually removing it.
  The value of DELETEDLIFETIME has been changed to 300. So after (possibly
  inadvertently) deleting a recording, there will be at least 5 minutes
  in which it can be recovered (unless a new recording immediately requires
  the disk space). The count starts again at 0 every time VDR is started.
- Fixed a possible crash when displaying the "Low disk space!" message from
  a background thread (thanks to Christof Steininger).
- Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler).
- Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground
  and background threads won't interfere.
- The main menu now dynamically updates its contents in case an instant
  recording or replay stops, etc.
- The version number of EPG events is now also stored in the epg.data file
  (thanks to Kendy Kutzner).
- EPG events that are no longer in the currently broadcasted data stream are
  now automatically deleted.
- Removed an invalid access to Event->schedule in cSchedule::DelEvent().
- Modified cSchedule::Cleanup() (events are always sorted by time).
- Schedules are now cleaned up once every hour (not only at 05:00).
- The "Schedule" and "What's on now/next?" menus are now updated if a timer
  is set or modified.
- cTimer no longer has its own 'schedule' member, it rather uses that of the
  event it has been set to.
- The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus
  now immediately creates a timer for the selected event and marks it with 'T'.
  If the event is already marked with 'T', the "Red" button opens the "Edit
  timer" menu for that timer.
- Removing deleted recordings is now done in a separate thread.
- Dropped the unused "stop recording on primary interface" stuff.
- Converting a grabbed image to JPEG is now done with the new function
  RgbToJpeg() (see tools.h).
- The SVDRP command GRAB now determines the image type (JPEG or PNM) from the
  extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit
  'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but
  has no meaning any more.
- The function cDevice::GrabImage() no longer writes the grabbed image to a
  file, but rather returns a pointer to the image in memory. The wrapper
  function cDevice::GrabImageFile() can be used to write the grabbed image
  directly to a file. Plugins that used the old version of cDevice::GrabImage()
  need to be adapted to the new interface.
- The new class cBase64Encoder (see tools.h) can be used to encode data in
  base64 (thanks to Bob Withers for publishing his Base64 class).
- The SVDRP command GRAB now writes the image data to the SVDRP connection
  (encoded in base64) if the given file name consists of only the file
  extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file
  name (based on a suggestion from Darren Salt).
  A simple way of viewing a grabbed image on a remote host is:

  svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display -

- The new command line option '-g' must be given if the SVDRP command GRAB
  shall be allowed to write image files to disk. The parameter to this option
  must be the full path name of an existing directory, without any "..", double
  '/' or symlinks. By default, or if "-g- is given, grabbing to files is
  not allowed any more because of potential security risks.
- Modified the way the SVDRP command GRAB writes the grabbed image to a file
  to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino
  Peña):
  + The file handle is now opened in a way that it won't follow symbolic links
    (suggested by Darren Salt).
  + The given file name is now canonicalized, so that it won't contain any
    ".." or symlinks (suggested by Darren Salt).
  + Grabbing to files is limited to the directory given in the the command
    line option '-g'. By default grabbing to files is not allowed any more.
- Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos).
- Changed all "illegal" to "invalid" in error messages (there's nothing "illegal"
  in VDR ;-).
- When started as user 'root' VDR now switches to a lesser privileged user id,
  keeping the capability to set the system time (based on a patch from Ludwig
  Nussel). By default the user id 'vdr' is used, which can be changed through
  the new command line option '-u'. Note that for security reasons VDR will no
  longer run as user 'root' (unless you explicitly start it with '-u root',
  but this is not recommended!). The 'runvdr' script has been changed to
  use the '-u' option.
- Changed the API of the functions cStatus::Recording() and cStatus::Replaying(),
  so that they can provide the full file name of the recording. Plugins that use
  these (or the related cStatus::Msg...() functions) need to be adapted
  (suggested by Andreas Brugger).
- The DVB devices now retune (and, if applicable, resend the DiSEqC data) if
  the lock is lost (based on a patch from Reinhard Nissl).
- Fixed handling multi byte key sequences in cKbdRemote (based on a patch from
  Jürgen Schneider).
- Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco
  Schlüßler).
- Made the static cControl functions thread safe (thanks to Patrick Fischer).
- Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid
  warnings with g++ 4.1.0 (thanks to Ville Skyttä).
- Fixed incrementing the 'state' variables in the repacker classes in remux.c
  to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä).
- The Makefile now reports a summary of failed plugins (thanks to Udo Richter).
- The cTimer constructor can now take an optional cChannel (suggested by
  Patrick Fischer).
- Fixed setting the main thread id if VDR is running as a daemon.
- Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl).
- Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner).
- Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger).
- Now using FE_READ_STATUS to read the current frontend status (suggested by
  Holger Wächtler).
- The "Menu" key now behaves consistently. If there is anything on the OSD, it
  is closed when the "Menu" key is pressed, and if there is nothing on the OSD,
  the "Menu" key opens the main menu (suggested by Luca Olivetti).
- The new option "Setup/OSD/Timeout requested channel info" can be used to turn
  off the automatic timeout of the channel display in case it was invoked by
  a press of the "Ok" key (suggested by Thiemo Gehrke).
- A message is now given when an instant recording is started (suggested by
  Helmut Auer). Actually the code was already there, just commented out - don't
  remember why it wasn't active...
- Removed an obsolete "Summary" text from i18n.c and preceded all key definition
  texts with "Key$" to avoid duplicates (reported by Lucian Muresan).
- Preceded all button texts with "Button$".
- Removed obsolete "Eject", "Language" and "scanning recordings..." texts.
- Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill).
- Disabled the use of "fadvise" in cUnbufferedFile because there have been
  several reports that it causes more problems than it solves (suggested by
  Petri Hintukainen). If you want to use "fadvise", you can activate the line
  //#define USE_FADVISE
  in tools.c.
- Removed unused 'offset' member from cOsdItem.
- In the "Channels" menu the numeric keys now position the cursor to the channel
  with the given number (see MANUAL, section "Remote Control Keys", note (3) for
  details).
- The "Mark/Move" function in the "Channels" menu now also works in the non-numeric
  sort modes.
- The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if
  this is a menu.
- The new "Info" key brings up information on the currently viewed programme
  or recording. For a live programme this is the same as "Schedule/Ok", i.e. the
  description of the current EPG event. For a recording this is the same as shown
  by the "Info" button in the "Recordings" menu. Plugins that implement players
  can overwrite their cControl::GetInfo() function to show their own info (see
  PLUGINS.html for details). Pressing the "Info" key again while the info is
  displayed will close the OSD. In order to assign this new key to an existing
  remote control setup, the remote.conf file needs to be deleted and VDR has
  to be restarted to go through the process of learning the remote control keys.
- Any cReceivers still attached to a cDevice when that device switches to a
  different transponder are now automatically detached (suggested by Patrick
  Fischer).
- The "flags" of a timer are now handled as an unsigned integer value. In order
  to do this, the interface of cMenuEditBitItem also had to be changed.
- In string entry fields (like, e.g., the file name of a recording) the characters
  can now be entered by pressing the numeric keys, the same way as on a
  telephone keypad (based on the "Easy Input" patch from Marcel Schaeben).
- Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch
  from "single shot" to "weekly", followed by the "Right" key (reported by
  Andreas Böttger).
- The file 'ca.conf' is obsolete and has been removed.
- Revised all descriptions regarding CICAM.
- Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling.
- Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack()
  (thanks to Reinhard Nissl).
- Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo
  Schneider).
- Cleaned up some trailing white space.

- Added compiler options "-fPIC -g" to all plugins (thanks to Rolf Ahrenberg).
- Fixed initializing the day index when editing the weekday parameter of a
  repeating timer (thanks to Marco Schlüßler).
- No longer removing superfluous hyphens in EPG data - would become too
  language dependent to handle all kinds of exceptions.
- Modified switching to Dolby Digital audio in live mode, if the driver
  and firmware can handle live DD without the need of a Transfer Mode (thanks
  to Werner Fink). Live DD mode requires a full featured DVB card and a
  LinuxDVB driver with firmware version 0x2622 or higher. Older versions will
  use Transfer Mode just like before.
- Implemented handling of the "CA PMT Reply" for CAMs (thanks to Marco
  Schlüßler for figuring out some obscure length bytes in the CA PMT Reply
  data of AlphaCrypt CAMs).
- Some preparations for being able to record several encrypted channels from
  the same transponder at the same time (or record and view different encrypted
  channels), provided the CAM in use can handle this. This is work in progress
  and isn't actively used, yet.
- Fixed SetProgress() in the 'skincurses' plugin in case Total is 0 (reported
  by Stefan Huelswitt).
- Added a copy constructor to cString and fixed its assignment operator
  (thanks to Holger Brunn).
- The new function Skins.QueueMessage() can be called from a background thread
  to queue a message for display. See VDR/skins.h for details.
- The SVDRP command MESG uses the new message queueing facility, so MESG
  commands may now be executed at any time, and the message will be displayed
  (no more "pending message").

- Fixed a race condition in cTransfer (thanks to Klaus Heppenheimer for reporting this one).
  In doing so, the 'active' variables used by the actual derived cThread classes
  have been replaced by the cThread::Running() function.
  Plugin authors may want to check their derived cThread classes and replace any 'active'
  variables the same way as, for instance, done in transfer.c.
- Fixed handling EPG data for time shifted events (thanks to Marco Schlüßler).
- Increased the default value for 'Min. user inactivity' to 300 minutes (suggested
  by Helmut Auer).
- Now storing the channel id in the info.vdr file even if there is no EPG info
  available (thanks to Andreas Brachold for reporting that there are empty info.vdr
  files created in that case).
- Added some 'mkdir -p' to the Makefile's 'install' target (thanks to Wayne Keer).
- Changed the title of the recording info menu (thanks to Rolf Ahrenberg).
- Fixed handling the frame number display if '7' is pressed before the first editing
  mark, or '9' after the last one (thanks to Thomas Günther).
- Now discarding any previous numerical input to switch channels if Up, Down, Channel+,
  Channel-, Left or Right is pressed (thanks to Wolfgang Rohdewald for reporting a
  problem with this).
- Pressing Ok while entering a channel number now immediately switches to that
  channel, without waiting for further input.
- Avoiding unnecessary OSD draw operations caused by the audio track description
  display in the ST:TNG skin's channel display (thanks to Oliver Endriss for reporting
  this).
- Removed the VIDEO_STILLPICTURE_WORKS_WITH_VDR_FRAMES stuff from
  cDvbDevice::StillPicture(), since apparently the VIDEO_STILLPICTURE call works.

- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Some cable providers don't mark short channel names according to the standard,
  but rather go their own way and use "name>short name". VDR now splits at this
  character for cable channels (thanks to Gerhard Steiner for reporting this one).
- Added a check for Setup.DiSEqC in cDvbDevice::ProvidesTransponder(), otherwise
  the EPG scan didn't work on systems that don't use DiSEqC (thanks to Michael
  Reinelt for reporting this one).
- Made the Makefile patch friendlier (thanks to Ludwig Nussel).
- Made cOsd::isOpen an integer counter to avoid problems with messages when a
  cOsdObject uses the raw OSD (thanks to Andreas Regel for reporting this one).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- The file 'summary.vdr' has been replaced with 'info.vdr' and now contains the
  information about a recording, in the same format as the events are stored in
  'epg.data' (see man vdr(5) for details). Existing summary files can be converted
  to the new format by running the Perl script 'summary2info.pl', as in

  summary2info.pl /video

  (the parameter given has to be the video directory). If there is no 'info.vdr'
  file for a recording, an attempt is made to read a 'summary.vdr'.
- The "Summary" button in the "Recordings" menu has been renamed to "Info", and
  the page it brings up now shows the recording's information, much like the EPG
  event page. Therefore it now no longer uses the skin's SetText() function, but
  rather the SetRecording() function. Skin plugins may need to adjust that function
  accordingly (see skinsttng.c, for instance).
- The SVDRP command LSTR now lists the recording information in the same tagged
  format as the LSTE command lists the EPG data.
- The audio track menu now contains track descriptions when replaying (provided
  such descriptions were available in the EPG data when the recording was made,
  and are stored in the info.vdr file).
- Avoiding extra blanks at the end of names of instant recordings.
- Removed converting byte order on big endian systems from cDvbOsd::Flush(),
  which, according to Johannes Stezenbach and Paavo Hartikainen, is wrong.
- Added cPlayer::DeviceSetVideoDisplayFormat() (thanks to Marco Schlüßler).
- No longer saving the setup in case of a fatal error, to keep the volume level
  from being set to a wrong value (thanks to Marco Schlüßler).
- Fixed a possible hangup when ending a replay session while cIndexFile::CatchUp()
  is waiting (thanks to Marco Schlüßler).
- The SVDRP command DELR no longer deletes recordings that are currently being
  written to by a timer (thanks to Sascha Volkenandt for pointing out this one).
- Pressing the "Play" key in live viewing mode now resumes a previous replay
  session (thanks to Mirko Dölle).
- Now dropping EPG events that have a zero start time or duration (thanks to
  Oliver Endriss).
- No longer stopping Transfer Mode or replay immediately when the Power button
  is pressed (thanks to Rolf Ahrenberg).
- Moved the NPTL and UTF-8 checks after the version and help output (thanks to
  Andreas Kool for pointing out that 'vdr --version' failed on an UTF-8 system).
- Made tChannelID::operator==() inline for better performance (thanks to Georg
  Acher).
- Introduced cListBase::count for better performance (thanks to Georg Acher).
- cEvent no longer stores the channelID directly, but rather has a pointer to
  the schedule it is in.
- Now using hash tables to speed up cSchedule::GetEvent() (partially based on
  a patch from Georg Acher).
- Avoiding unnecessary calls to getLength() in libsi/si.c, and avoiding the
  '& 0xff' in CRC32::crc32() of libsi/util.c (thanks to Georg Acher).
- Speeded up deleting duplicate channels.
- Fixed listing recordings with empty episode names in the LSTR command (thanks
  to Stefan Huelswitt for pointing this out).
- Added cThread::SetPriority() and using it in cSectionHandler::Action() to
  reduce the priority of the section handler threads (as suggested by Georg Acher).

- Now including the optional user defined Make.config from the 'libsi' Makefile
  (thanks to Ville Skyttä).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Fixed a memory leak in tComponent (thanks to Stefan Huelswitt and Daniel Thompson).
- Fixed a memory leak in cDvbPlayer (thanks to Stefan Huelswitt).
- Added missing text internationalization for "Starting EPG scan" (thanks to
  Matthias Lötzke).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed handling transparent areas in cDvbSpuBitmap (thanks to Marco Schlüßler).
- Now also considering the "EPG linger time" when saving the EPG data to file or
  listing it via LSTE (thanks to Roman Krenický).
- Fixed handling fragments of less than 4 byte in cPesAssembler (thanks to
  Reinhard Nissl).
- Fixed a bug in libsi's SubtitlingDescriptor::getLength() (thanks to Marco
  Schlüßler).
- When reading the channels.conf file, duplicate channels (i.e. ones that have
  the same channel ID) are now automatically deleted and only the first one is
  actually stored.
- Fixed handling lifetime when deciding whether to delete a recording (thanks to
  Udo Richter).
- Fixed timeout handling in cRwLock::Lock() (thanks to Sascha Volkenandt for reporting
  this one).
- Since there are several places in thread.c where a timeout value is calculated,
  this has been put into a separate function.
- The timer status now has a new bit that is set when that timer is currently
  recording (suggested by Matthias Schniedermeyer). See man vdr(5) for details.
- Removed scaling coordinates in letterbox mode from cDvbSpu - the DVD plugin, which
  was the only one needing this, doesn't need it any more (thanks to Marco Schlüßler).
- No longer retuning or restarting a recording if only the language code of an
  audio or Dolby PID changes.
- Now preferring budget cards when selecting a DVB device for recording.
- Recordings now avoid zero sized video data files (thanks to Wolfgang Fitz).
- Some rearrangements in cDvbPlayer::Action() to avoid lockups on NPTL systems
  (thanks to Reinhard Nissl).
- Fixed a wrong inheritance in libsi's SubtitlingDescriptor::Subtitling (thanks to
  Marco Schlüßler).

- Making sure at least the default skin is available at program start in case a
  plugin needs to issue an error message (thanks to Achim Tuffentshammer for
  reporting a crash in such a case). Also checking if there is a current skin
  in cSkins::Message().
- Completed the Finnish OSD texts and fixed internationalization of the text
  for "Setup/DVB/Audio language(s)" (thanks to Rolf Ahrenberg).
- Completed the Estonian OSD texts and switched to iso8859-13 character set
  (thanks to Arthur Konovalov).
- Made cCondWait::SleepMs() sleep at least 3ms to avoid a possible busy wait.
- Fixed canceling the LIRC thread (thanks to Marco Schlüßler for pointing out
  this one).
- The "Green" button in the "Main" menu is now always "Audio", since the audio
  channel might be changed even if there is only one actual audio PID.
- Fixed handling the '-E' option which was broken in version 1.3.18 (thanks to
  Christian Jacobsen for reporting this one).
- Added 'channels.conf.terr' entries for Mainz (thanks to Michael Heyse).
- Implemented cDolbyRepacker for better handling of Dolby Digital PES packets
  (thanks to Reinhard Nissl).
- Fixed playing files with PES packets longer than 2048 byte through the full
  featured DVB card (thanks to Marco Kremer for reporting this one and providing
  a test sample).
- Recording and Transfer Mode now handle more than 2 audio PIDs. For this the
  interfaces of the following functions have been changed:
  cTransferControl::cTransferControl()
  cTransfer::cTransfer()
  cRecorder::cRecorder()
  cReceiver::cReceiver()
  cRemux::cRemux()
- Fixed a possible race condition in cDevice::Action() and cTSBuffer::Action()
  (thanks to Stefan Huelswitt).
- Extended some buffer sizes to allow handling HDTV streams (thanks to Reinhard
  Nissl).
- Added 'channels.conf.terr' entries for Düsseldorf and Köln (thanks to Walter Koch).
- Falling back to 'stereo' when switching channels in case the user had switched
  to 'left' or 'right' (suggested by Rolf Groppe).
- Completed the Danish OSD texts (thanks to Mogens Elneff).
- Recording and Transfer Mode can now handle up to 8 Dolby Digital tracks (thanks
  to Marco Schlüßler for a patch that implements substream handling into
  cDevice::PlayPesPacket(), and Reinhard Nissl for adding substream handling to
  cDolbyRepacker).
- Added PlayPes(NULL, 0) to cTransfer::Action() when clearing the transfer buffer
  to avoid overflows (thanks to Marco Schlüßler for pointing this out).