Version 0.66vdr-0.66

- Remote control data is now received in a separate thread, which makes things
  a lot smoother.
- Repeat and release of remote control keys is now explicitly distinguished.
- In replay mode the search forward/back and skip functions now have two modes:
  Pressing the key shortly and releasing it starts the function, and pressing it
  again stops it. Pressing and holding down the key starts the function and
  releasing the key stops it.
- The '@' character that marks an "instant recording" can now be turned off
  in the "Setup" menu (thanks to Matthias Schniedermeyer).
- Pressing the "Back" button while replaying now stops replaying and brings up
  the "Recordings" menu (suggested by Carsten Koch). This can be used to easily
  delete a recording after watching it, or to switch to a different recording.
- The "Recordings" menu now places the cursor on the last replayed recording, if
  that file still exists.
- The "Blue" button in the "Main" menu can now be used to "Resume" a previously
  stopped replay session (suggested by Martin Hammerschmid).
- The low and high LNB frequencies can now be changed in the "Setup" menu.

1 files changed, 24 insertions, 5 deletions

diff --git a/MANUAL b/MANUAL
index 24ee3ff..9b864e3 100644
--- a/MANUAL
+++ b/MANUAL
@@ -16,11 +16,11 @@ Video Disk Recorder User's Manual
   Right   Next group  -          -          Enable     Increment     -           Search forward
   Ok      Ch display  Select     Switch     Edit       Accept        Play        Progress disp.
   Menu    Menu on     Menu off   Menu off   Menu off   Menu off      Menu off    Menu on
-  Back    -           Menu off   Main menu  Main menu  Discard       Main menu   -
+  Back    -           Menu off   Main menu  Main menu  Discard       Main menu   Recordings menu
   Red     -           Record     Edit       Edit       -             Play        -
   Green   -           -          New        New        -             -           Skip -60s
   Yellow  -           -          Delete     Delete     -             Delete      Skip +60s
-  Blue    -           -          Mark       Mark       -             -           Stop
+  Blue    -           Resume     Mark       Mark       -             -           Stop
   0..9    Ch select   -          -          -          Numeric inp.  -           -
 
 * Navigating through the On Screen Menus
@@ -90,7 +90,7 @@ Video Disk Recorder User's Manual
 * Instant Recording
 
   You can start recording the current channel by pressing the "Red" button
-  in the Main menu. This will create a timer event named "@channelname" that
+  in the "Main" menu. This will create a timer event named "@channelname" that
   starts at the current time and records for two hours.
   If you want to modify the recording time you need to edit the timer.
   Stop instant recording by pressing the "Menu" button and selecting
@@ -101,8 +101,10 @@ Video Disk Recorder User's Manual
   All recordings are listed in the "Recordings" menu. Browse through the
   list with the "Up" and "Down" button and press "Ok" (or the "Red" button)
   to start playback. New recordings are marked with an '*'.
-  Playback can be stopped via the Main menu by selecting "Stop replaying",
+  Playback can be stopped via the "Main" menu by selecting "Stop replaying",
   or by pressing the "Blue" button outside the menu.
+  A previously stopped playback session can be resumed by pressing the "Blue"
+  button in the "Main" menu.
 
 * Replay Control
 
@@ -118,12 +120,19 @@ Video Disk Recorder User's Manual
     Right   Runs playback forward or backward at a higher speed; press
             again to resume normal speed. If in Pause mode, runs forward or
             backward at a slower speed; press again to return to pause mode.
+            Pressing and holding down the button performs the function until
+            the button is released again.
   - Green
     Yellow  Skips about 60 seconds back or forward.
+            Pressing and holding down the button performs the function until
+            the button is released again.
   - Ok      Brings up the replay progress display, which shows the date,
             time and title of the recording, a progress bar and the
             current and total time of the recording.
             Press "Ok" again to turn off the progress display.
+  - Back    Stops replaying and brings up the "Recordings" menu. This can be
+            used to easily delete a recording after watching it, or to switch
+            to a different recording.
 
 * Programming the Timer
 
@@ -171,7 +180,7 @@ Video Disk Recorder User's Manual
 
 * Parameters in the "Setup" menu
 
-  Select "Setup" from the main menu to enter the setup menu. From there you can
+  Select "Setup" from the "Main" menu to enter the setup menu. From there you can
   modify the following system parameters (note that "boolean" values will be
   displayed as "no" and "yes" in the "Setup" menu, while in the setup file they
   are stored as '0' and '1', respectively):
@@ -197,3 +206,13 @@ Video Disk Recorder User's Manual
                          1 = dto., but the cursor remains at the bottom (top) of
                              the page (this mode allows for faster scrolling
                              through long lists).
+
+  MarkInstantRecord = 1  Defines whether an "instant recording" (started by
+                         pressing the "Red" button in the "Main" menu) will be
+                         marked with a '@' character to make it distinguishable
+                         from timer recordings in the "Recordings" menu.
+                         0 = instant recordings will not be marked
+                         1 = instant recordings will be marked.
+
+  LnbFrequLo = 9750      The low and high LNB frequencies (in MHz)
+  LnbFrequHi = 10600