Version 0.71vdr-0.71

- Fixed 'Transfer Mode' in cases where a non-primary interface was switched to
  a channel that only the primary interface can receive (which could happen in
  the EPG scanner).
- The EPG scanner now starts with the first channel (it used to start with the
  second channel).
- Reacitvated setting the PNR.
- Adapted the frame scanning to the new muxing of the driver.
- The new compile time option REMOTE=NONE can be used to compile VDR without
  any remote control support (for applications where it shall be controlled
  exclusively via SVDRP).
- The new command line option -D can be used to define which DVB interfaces
  a certain instance of VDR shall use.
- The "Left" and "Right" keys are now used to page up and down in lists (thanks
  to Martin Hammerschmid). Since the "Timers" menu already uses these keys to
  (de)activate timers, this functionality is not available there.
- The "Main" and "Commands" menu now support "hotkeys", which means that if the
  first non-blank character of a menu item is a digit in the range 1..9, that
  item can be selected by pressing the respective numeric key on the remote
  control.
- The channel data in 'channels.conf' now contains the teletext PID (thanks to
  Dave Chapman). Existing files will be read normally (and the teletext PID set
  to 0), but once they are written back (due to some channel editing) the file
  will have the new format.
- The EPG scanner now scans each transponder only once per cycle.
- Deleted recordings are now automatically removed from disk after a while (not
  only when disk space is being needed for a new recording).
- Fixed repeat function in LIRC remote control.
- Changed the MAXDVBAPI macro in dvbapi.c to 4 in order to directly support the
  maximum possible number of DVB cards.
- The 'Ca' parameter in the default 'channels.conf' has been changed from '2'
  to '3' because the VDR prototype now has 3 DVB cards (and currently the CAM
  module only works if it is inserted into the last DVB card).
- The "Now", "Next" and "Schedule" menus now remember the current channel and
  restore the list when switching between them.
- The "Green" button in the "Recordings" menu can now be used to rewind a
  recording and play it from the very beginning.
- Fixed handling ':' in timer filenames and '\n' in timer summaries (see FORMATS).
- When removing recordings empty directories are now removed from the video
  directory.
- Added the "schnitt" tools from Matthias Schniedermeyer.
- New SVDRP command MESG to display a short message on the OSD.
- The Perl script 'svdrpsend.pl' can be used to send SVDRP commands to VDR.
- SVDRP can now immediately reuse the same port if VDR is restarted.
- SVDRP now has a timeout after which the connection is automatically closed
  (default is 300 seconds, can be changed in "Setup").
- The compile time switch VFAT can be used to make VDR avoid the ':' character
  in file names (VFAT can't handle them). Do 'make VFAT=1' to enable this.
- Support for DVB-C (thanks to Hans-Peter Raschke and Peter Hofmann).
  See the INSTALL file for more information about the use of VDR with cable.
- Fixed an occasional segfault in the EIT processor.
- A value of '0' for the EPGScanTimeout setup parameter now completely turns off
  scanning for EPG data on both single and multiple card systems.
- New setup parameter "PrimaryLimit" that allows to prevent timers from using the
  primary DVB interface in multi card systems. Default value is 0, which means
  that every timer may use the primary interface.
- The 'active' field of a timer will now be explicitly set to '1' if the user
  modifies an active timer (see FORMATS for details).
- The new command line option -w can be used to activate a watchdog that makes
  VDR exit in case the main program loop does not respond for more than the
  given number of seconds. This is mainly useful in combination with the new
  'runvdr' script that restarts VDR in case is has exited.

1 files changed, 21 insertions, 7 deletions

diff --git a/MANUAL b/MANUAL
index b0e9abe..f77bd27 100644
--- a/MANUAL
+++ b/MANUAL
@@ -12,16 +12,16 @@ Video Disk Recorder User's Manual
 
   Up      Ch up       Crsr up    Crsr up    Crsr up    Crsr up       Crsr up     Play
   Down    Ch down     Crsr down  Crsr down  Crsr down  Crsr down     Crsr down   Pause
-  Left    Prev group  -          -          Disable    Decrement     -           Search back
-  Right   Next group  -          -          Enable     Increment     -           Search forward
+  Left    Prev group  -          Page up    Disable    Decrement     Page up     Search back
+  Right   Next group  -          Page down  Enable     Increment     Page down   Search forward
   Ok      Ch display  Select     Switch     Edit       Accept        Play        Progress disp.
   Menu    Menu on     Menu off   Menu off   Menu off   Menu off      Menu off    Menu on
   Back    -           Menu off   Main menu  Main menu  Discard       Main menu   Recordings menu
   Red     -           Record     Edit       Edit       -             Play        -
-  Green   -           -          New        New        -             -           Skip -60s
+  Green   -           -          New        New        -             Rewind      Skip -60s
   Yellow  -           -          Delete     Delete     -             Delete      Skip +60s
-  Blue    -           Resume     Mark       Mark       -             -           Stop
-  0..9    Ch select   -          -          -          Numeric inp.  -           -
+  Blue    -           Resume     Mark       Mark       -             Summary     Stop
+  0..9    Ch select   -          -          -          Numeric inp.  -           Editing
 
 * Navigating through the On Screen Menus
 
@@ -310,7 +310,7 @@ Video Disk Recorder User's Manual
                          1 = instant recordings will be marked.
 
   LnbFrequLo = 9750      The low and high LNB frequencies (in MHz)
-  LnbFrequHi = 10600
+  LnbFrequHi = 10600     (these have no meaning for DVB-C receivers)
 
   SetSystemTime = 0      Defines whether the system time will be set according to
                          the time received from the DVB data stream.
@@ -326,7 +326,21 @@ Video Disk Recorder User's Manual
   EPGScanTimeout = 5     The time (in hours) of user inactivity after which the
                          DVB card in a single card system starts scanning channels
                          to keep the EPG up-to-date.
-                         A value of '0' turns off scanning on a single card system.
+                         A value of '0' completely turns off scanning on both single
+                         and multiple card systems.
+
+  SVDRPTimeout = 300     The time (in seconds) of inactivity on an open SVDRP
+                         connection after which the connection is automatically
+                         closed. Default is 300, a value of 0 means no timeout.
+
+  PrimaryLimit = 0       The minimum priority a timer must have to be allowed to
+                         use the primary DVB interface, or to force another timer
+                         with higher priority to use the primary DVB interface.
+                         This is mainly useful for recordings that should take
+                         place only when there is nothing else to do, but should
+                         never keep the user from viewing stuff on the primary
+                         interface. On systems with only one DVB card, timers
+                         with a priority below PrimaryLimit will never execute.
 
 * Executing system commands