summaryrefslogtreecommitdiff
path: root/MANUAL
diff options
context:
space:
mode:
authorKlaus Schmidinger <kls (at) cadsoft (dot) de>2000-11-19 18:00:00 +0100
committerKlaus Schmidinger <kls (at) cadsoft (dot) de>2000-11-19 18:00:00 +0100
commit9aa2cda494d7af2733362de78234441a25959e86 (patch)
treea057edf79f3177b3ae1930e111df52cb90f95283 /MANUAL
parenta69b3211dc4f9b34eef440067d5ba304fbfbad94 (diff)
downloadvdr-patch-lnbsharing-9aa2cda494d7af2733362de78234441a25959e86.tar.gz
vdr-patch-lnbsharing-9aa2cda494d7af2733362de78234441a25959e86.tar.bz2
Version 0.68vdr-0.68
- Date and time in the title of an event info page are now always right adjusted. - The 'current channel' is now handled device specific (in case there is more than one DVB card). - The 'SetSystemTime' option in the "Setup" menu is now shown as "yes/no". - Implemented "internationalization" (see 'i18n.c' for information on how to add new languages). Thanks to Miha Setina for translating the OSD texts to the Slovenian language. - Fixed learning keys on the PC keyboard (display oscillated). - Fixed a timing problem with OSD refresh and SVDRP. - Avoiding multiple definitions of the same timer in the "Schedule" menu (this could happen when pressing the "Red" button while editing the timer). - There can now be a configuration file named 'commands.conf' that defines commands that can be executed through the "Main" menu's "Commands" option (see FORMATS for details on how to define these commands). - Added a 'fixed' font for use with the output of system commands. - The 'Priority' parameter of the timers is now also used to interrupt a low priority timer recording if a higher priority timer wants to record. - A timer recording on a DVB card with a CAM module will now be interrupted by a timer that needs to use this specific DVB card to record an encrypted channel, if the timer currently occupying this DVB card doesn't need the CAM module (and thus can continue recording on a different DVB card). - The "Yellow" button in the "What's on now/next?" menus now displays the schedule of the current channel from that menu. - All DVB cards in a multi-card system now write their EIT information into the same data structure. - If there is more than one DVB card in the system, the non-primary cards are now used to periodically scan through the channels in order to keep the EPG info up-to-date. Scanning kicks in after 60 seconds of user inactivity (timeout in order to keep user interactions instantaneously) and each channel that has the 'pnr' parameter defined in 'channels.conf' is switched to for 20 seconds. If there is only one DVB card in the system, that card will start scanning after 5 hours (configurable through the "Setup" menu) of user inactivity and will switch back to the channel it originally displayed at the first sign of user activity. Any scanning will only occur if that particular card is not currently recording or replaying. - Now shifting the 'Subtitle' info into the 'ExtendedDescription' on stations that don't send the EIT information correctly (like, e.g., 'VOX'). - Implemented a 10 seconds latency when removing files. - Fixed unwanted reaction on the "Green" and "Yellow" button in the "Event" display. - Implemented 'Transfer Mode' to display video data from the DVB card that actually can receive a certain channel on the primary interface. This is currently in an early state and may still cause some problems, but it appears to work nice already.
Diffstat (limited to 'MANUAL')
-rw-r--r--MANUAL43
1 files changed, 40 insertions, 3 deletions
diff --git a/MANUAL b/MANUAL
index ffcc10b..46466bf 100644
--- a/MANUAL
+++ b/MANUAL
@@ -74,8 +74,8 @@ Video Disk Recorder User's Manual
programmes that will start next on all channels.
Inside the "What's on now/next?" menus the "Green" button toggles between
- the "Now" and "Next" display, and the "Yellow" button gets you back to the
- "Schedule" menu of the current channel.
+ the "Now" and "Next" display, and the "Yellow" button takes you to the
+ "Schedule" menu of the current channel in the list.
The "Red" button allows you to instantly program a timer to record the
selected programme. You will get into the "Edit Timer" menu in which
@@ -203,7 +203,9 @@ Video Disk Recorder User's Manual
to free space for a new recording. If the disk is full and a new
recording needs more space, an existing recording with the lowest
Priority (and which has exceeded its guaranteed Lifetime) will be
- removed.
+ removed. If all available DVB cards are currently occupied, a
+ timer with a higher priority will interrupt the timer with the
+ lowest priority in order to start recording.
Lifetime: The number of days (0..99) a recording made through this timer is
guaranteed to remain on disk before it is automatically removed
to free up space for a new recording. Note that setting this
@@ -228,6 +230,10 @@ Video Disk Recorder User's Manual
displayed as "no" and "yes" in the "Setup" menu, while in the setup file they
are stored as '0' and '1', respectively):
+ OSDLanguage = 0 Defines the language used to display the OSD texts.
+ 0 = Englisch
+ 1 = Deutsch
+
PrimaryDVB = 1 Defines the primary DVB interface (i.e. the one that
will display the menus and will react on input through
the remote control). Valid values range from '1' to the
@@ -266,6 +272,37 @@ Video Disk Recorder User's Manual
1 = system time wil be set
Note that this works only if VDR is running under a user
id that has permisson to set the system time.
+
MarginStart = 2 Defines how many minutes before the official start time
MarginStop = 10 of a broadcast VDR shall start recording, and how long
after the official end time it shall stop recording.
+
+ EPGScanTimeout = 5 The time (in hours) of user inactivity after which the
+ DVB card in a single card system starts scanning channels
+ to keep the EPG up-to-date.
+ A value of '0' turns off scanning on a single card system.
+
+* Executing system commands
+
+ The "Main" menu option "Commands" allows you to execute any system commands
+ defined in the configuration file 'commands.conf' (see FORMATS for details).
+ The "Commands" option will only be present in the "Main" menu if a valid
+ 'commands.conf' file containing at least one command definition has been
+ found at program start.
+
+ This feature can be used to do virtually anything, like checking for new
+ mail, displaying the CPU temperature - you name it! All you need to do is
+ enter the necessary command definition into 'commands.conf' and implement
+ the actual command that will be called. Such a command can typically be a
+ shell script or a Perl program. Anything that command writes to stdout will
+ be displayed on a result screen after executing the command. This screen will
+ use a 'fixed' font so that you can generate formatted output. In order to
+ avoid error messages going to stderr, command definitions should redirect
+ stderr to stdout (see FORMATS).
+
+ WARNING: THE COMMANDS DEFINED IN 'commands.conf' WILL BE EXECUTED UNDER THE
+ ======= SAME USER ID THAT VDR IS RUNNING WITH. BE VERY CAREFUL WHEN
+ DEFINING THESE COMMANDS AND MAKE SURE THEY DON'T HARM YOUR SYSTEM,
+ ESPECIALLY IF YOU ARE RUNNING VDR UNDER A HIGH PRIVILEGED USER ID
+ (LIKE 'root').
+