Version 0.95vdr-0.95

- Fixed behaviour in case the shutdown didn't take place (there were many
  "next timer event at..." messages in that case).
- Reduced the default value for MinEventTimeout to 30 minutes.
- Fixed detecting manual start in shutdown feature.
- An error message is now displayed in case the Transfer Mode can't be
  started because the necessary DVB card is currently recording (or there
  is no DVB card that can access this channel).
- Fixed toggling channels with the '0' key in case the "Ok" button has been
  pressed to display the current/next information.
- Pressing the "Power" key now always initiates the shutdown sequence (after
  user confirmation in case of a recording timer), event if there is currently
  a menu or a replay session active. Note the additional remarks in INSTALL
  regarding the values of the two parameters given to the shutdown program
  in case of a currently recording timer.
- Switching through channel groups with the "Left" and "Right" keys now
  always starts at the group that contains the current channel.
- Implemented "Multi Speed Mode" (thanks to Stefan Huelswitt).
- Implemented backtracing to hit the right spot after fast forward/rewind
  (thanks to Stefan Huelswitt).
- Implemented replay mode display (thanks to Stefan Huelswitt, with a few
  rewrites by kls).
- Changed the size of all input buffers used to parse config files or receive
  SVDRP commands to the same value of 10KB. This allows long strings to be
  used in the 'summary' field of a timer, for instance.
- The pipe to the Dolby Digital replay command (option '-a') now closes all
  unused file descriptors in the child process to avoid crashing when the
  OSD is used (thanks to Andreas Vitting).
- Switched to the driver's new tuning API (VDR now requires a driver version
  dated 2001-09-14 or higher).
- Changed obsolete macro VIDEO_WINDOW_CHROMAKEY to VID_TYPE_CHROMAKEY (thanks
  to Guido Fiala).
- New version of the "Master-Timer" tool (thanks to Matthias Schniedermeyer).
- Better error handling when writing configuration files.
- Fixed putting the final editing mark into the edited version's marks file.
- Fixed manipulating an editing mark at the very end of a recording.
- Fixed starting a new replay immediately after stopping a previous one (had
  caused a mix between live video and replay).
- Three new keys ("Volume+", Volume-" and "Mute") to control the DVB card's
  audio output volume.
- New version of the 'epg2timers' tool (thanks to Carsten Koch).

1 files changed, 20 insertions, 2 deletions

diff --git a/MANUAL b/MANUAL
index c6b5efd..05f2f3c 100644
--- a/MANUAL
+++ b/MANUAL
@@ -8,7 +8,7 @@ Video Disk Recorder User's Manual
   possible, several keys have different meanings in the various
   modes:
 
-  Key     Normal      Main       Channels   Timers     Edit/New      Recordings  Replay
+  Key         Normal      Main       Channels   Timers     Edit/New      Recordings  Replay
 
   Up      Ch up       Crsr up    Crsr up    Crsr up    Crsr up       Crsr up     Play
   Down    Ch down     Crsr down  Crsr down  Crsr down  Crsr down     Crsr down   Pause
@@ -23,6 +23,9 @@ Video Disk Recorder User's Manual
   Blue    -           Resume     Mark       Mark(1)    -             Summary     Stop
   0..9    Ch select   -          -          -          Numeric inp.  -           Editing
   Power   Shutdown    -          -          -          -             -           -
+  Volume+ Volume up   -          -          -          -             -           -
+  Volume- Volume down -          -          -          -             -           -
+  Mute    Mute        -          -          -          -             -           -
 
   (1) The "Mark" button in the "Timers" menu only works if sorting the timers
       has been disabled in the "Setup" menu.
@@ -177,6 +180,10 @@ Video Disk Recorder User's Manual
             backward at a slower speed; press again to return to pause mode.
             Pressing and holding down the button performs the function until
             the button is released again.
+            If "Multi Speed Mode" has been enabled in the "Setup" menu, the
+            function of these buttons changes in a way that gives you three
+            fast and slow speeds, through which you can switch by pressing
+            the respective button several times.
   - Red     Jump to a specific location. Enter the time you want to jump to
             and then press "Left" or "Right" to jump relative to the current
             position, "Up" to jump to an absolute position, and "Down" to
@@ -442,7 +449,7 @@ Video Disk Recorder User's Manual
                          you may want to use smaller values if you are planning
                          on archiving a recording to CD.
 
-  MinEventTimeout=120    If the command line option '-s' has been set, VDR will
+  MinEventTimeout=30     If the command line option '-s' has been set, VDR will
   MinUserInactivity=120  automatically shutdown the computer if the next timer
                          event is at least MinEventTimeout minutes in the future,
                          and the user has been inactive for at least
@@ -451,6 +458,17 @@ Video Disk Recorder User's Manual
                          retaining the possibility to manually shutdown the
                          computer.
 
+  MultiSpeedMode = 0     Defines the function of the "Left" and "Right" keys in
+                         replay mode. If set to 0, one speed will be used, while
+                         if set to 1 there will be three speeds for fast and slow
+                         search, respectively.
+                         0 = off
+                         1 = on
+
+  ShowReplayMode = 0     Turns displaying the current replay mode on or off.
+                         0 = off
+                         1 = on
+
 * Executing system commands
 
   The "Main" menu option "Commands" allows you to execute any system commands