summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2004-02-29Version 1.3.5vdr-1.3.5Klaus Schmidinger
- Fixed reading the EPG preferred language parameter from 'setup.conf'. - Fixed switching to a visible programme in case the current channel has neither a video nor an audio PID. - Fixed editing channels (SID now range checked) and creating new channels (NID, TID and RID are now set to 0). - Fixed transponder handling to make it work with satellites that provide two transponders on the same frequency, with different polarization, like Hispasat at S30.0W (thanks to Thomas Bergwinkl for pointing this out). See man vdr(5) for details about the enhanced channel ID format. - Since there appears to be no general solution for the UPT error yet, a recording now initiates an "emergency exit" if the number of UPT errors during one recording exceeds 10 (suggested by Gregoire Favre). Since the UPT error doesn't happen on my system, this has not been explicitly tested. The "preliminary fix" for the UPT error in VDR/dvbdevice.c has been disabled by default, since it makes channel switching unpleasently slow. If you want to have that workaround back, you can uncomment the line //#define WAIT_FOR_LOCK_AFTER_TUNING 1 in VDR/dvbdevice.c. - Adapted the 'sky' plugin to use the actual channel IDs, and to fetch EPG data from www.bleb.org. - Limited automatic retuning to devices that actually provide the transponder (necessary for the 'sky' plugin). - Fixed handling receivers in the 'sky' plugin, so that a recording on the same channel won't interrupt an ongoing Transfer Mode. - Added subtable ID and TSDT handling to 'libsi' (thanks to Marcel Wiesweg). - Fixed some Russian OSD texts (thanks to Vyacheslav Dikonov). - Added the 'running status' to the EPG events. This is necessary for implementing the VPS function for recording. - Removed the obsolete 'present' and 'following' handling from the EPG data. - The EPG data is now always kept sorted chronologically in the internal data structures. This also means that any EPG data retrieved through the SVRDP command LSTE is guaranteed to be sorted by start time. - Now using the 'running status' in the channel display, so that a programme that has an end time that is before the current time, but is still running, will still be shown in the display (provided the broadcasters handle the 'running status' flag correctly). This also applies to programmes that have a start time that is in the future, but are already running. - Implemented an "EPG linger time", which can be set to have older EPG information still displayed in the "Schedule" menu (thanks to Jaakko Hyvätti). - Added PDCDescriptor handling to 'libsi'. - Implemented handling the VPS timestamps (aka "Programme Identification Label") for full VPS support for timers (provided the tv stations actually broadcast this information). The VPS time is displayed in the event info page if it exists and is different than the event's start time. - Extended the SVDRP command LSTE to allow limiting the listed data to a given channel, the present or following events, or events at a given time (thanks to Thomas Heiligenmann). - Fixed a typo in libsi/si.h (thanks to Stéphane Esté-Gracias). - Timers can now be set to use the VPS information to control recording a programme. The new setup options "Recording/Use VPS" and "Recording/VPS margin", as well as the "VPS" option in the individual timers, can be used to control this feature (see MANUAL for details). Note that this feature will certainly need a lot of testing before it can be called "safe"! - The "Schedule" and "What's on now/next?" menus now have an additional column which displays information on whether there is a timer defined for an event, whether an event has a VPS time that's different than its start time, and whether an event is currently running (see MANUAL under "The "Schedule" Menu" for details).
2004-02-08Version 1.3.4vdr-1.3.4Klaus Schmidinger
- Fixed handling language codes in case there is no audio or Dolby PID. - Fixed handling CA ids (was broken in 1.3.3). - Fixed the SVDRP command 'STAT DISK' to avoid a 'division by 0' in case the disk is full (thanks to Jens Rosenboom). - Fixed handling bitmap indexes for 256 color mode (thanks to Andreas Regel). - Now handling "linked services" (based on the 'autopid' patch from Andreas Schultz). Linked channels are detected and added to 'channels.conf', but currently they are not yet presented to the user other than being in the normal channel list (this will come later). - Preliminary fix for the "Unknown picture type error" (thanks to Sascha Volkenandt for his support in debugging this one). This may slow down switching between channels on different transponders for now, but a better solution will come later. - Fixed the validity check for channel IDs, because some providers use TIDs with value 0 (thanks to Thomas Bergwinkl). - Enabled switching to a channel even if it has no Vpid or Apid set, because these might be automatically set when tuned to that transponder. - No longer closing the Channels menu after trying to switch to a channel that is currently not available. - Removed the now obsolete CaCaps stuff. The Setup/CICAM menu now displays the actual CAM type as reported by the CAM. The 'ca.conf' file has been stripped down to the values 0..4.
2004-01-25Version 1.3.3vdr-1.3.3Klaus Schmidinger
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added ISO639LanguageDescriptor to 'libsi'. - Changed the 'languageCode' members in the descriptor classes of 'libsi' to 'char[4]' and setting the 4th byte to 0 for easier handling. - Fixed frequency handling when setting the CA descriptors in cDvbTuner::Action() (thanks to Jan Ekholm for reporting and helping to debug this one). - Now setting CA descriptors even if "Setup/DVB/Update channels" is less than 2. - There can now be up to 32 audio and Dolby PIDs (however, currently still only the first two are used throughout the rest of the program). - The audio and Dolby PIDs in 'channels.conf' now can have an optional language code (see man vdr(5)). Currently this is only stored and not yet used otherwise. - Added a call to cStatus::MsgOsdCurrentItem() to cMenuEditItem::SetValue() (thanks to Martin Hammerschmid).
2004-01-18Version 1.3.2vdr-1.3.2Klaus Schmidinger
- Fixed resetting the EPG data versions after changing the preferred languages (thanks to Teemu Rantanen for reporting this one and helping to debug it). - Added LinkageDescriptor handling to 'libsi' (thanks to Marcel Wiesweg). - Added Russian language texts (thanks to Vyacheslav Dikonov). Plugin authors may want to add the new entries to their I18N texts and contact the translators to have their texts translated. Note that there are now 17 different OSD languages, so please make sure you have 17 versions for each of your texts. - Some corrections and additions to the Finnish OSD texts (thanks to Rolf Ahrenberg and Niko Tarnanen). - Fixed a wrong 'delta' value in the call to the shutdown script (thanks to Stephan Epstein for reporting this one). - Activated detection of radio channels (to avoid reports about "channels not being detected that used to be detected with the 'scan' utility or the original 'autopid' patch ;-). - Channels with a zero VPID no longer write a PPID into channels.conf. - Short channel names are now only stored if they actually differ from the full name. - The EPG scan now scans newly found transponders together with already existing ones. - The "Red" button in the "Setup/EPG" menu can now be used to force an EPG scan on a single DVB card system (see MANUAL for details). - The new SVDRP command 'SCAN' can be used to force an EPG scan on a single DVB card system (see MANUAL under Setup/EPG for details). - Fixed handling PID changes in 'Transfer Mode'. - Excess blanks in channel names read from the SDT are now removed. - Fixed wrong parameter settings when scanning NITs for terrestrial transponders (thanks to Christian Tramnitz for pointing out this one). - Fixed some out of bounds parameter settings when scanning NITs for cable and satellite transponders. - Added 'libsi' include files to the 'include' directory, so that plugins can use them (thanks to Marcel Wiesweg). - Now only processing NITs that contain the transponder they are actually broadcast on. - Fixed setting the source type for newly detected terrestrial transponders (thanks to Christian Tramnitz for his support in debugging this).
2004-01-11Version 1.3.1vdr-1.3.1Klaus Schmidinger
- Fixed a lockup in the EPG scanner when no non-primary device was available (thanks to Martin Holst for reporting this one). - Fixed a compiler warning about virtual cConfig::Load() functions (thanks to Lauri Tischler for reporting this one). - Fixed a warning about character comparison in libsi/si.c (thanks to Lauri Tischler for reporting this one). - The new parameter "Update channels" in the "Setup/DVB" menu can be used to control if and how channels will be automatically updated (see MANUAL). This has already been part of the 'autopid' patch by Andreas Schultz and has now been adopted. - Fixed a crash in case there is no DVB hardware present (thanks to Sascha Volkenandt for reporting this one). - Changed calculation of channel ids to make it work for tv stations that use the undefined NID value 0 (thanks to Teemu Rantanen for reporting this one). - Enhanced the SDT filter to handle multi part sections. - Added support for selecting preferred EPG languages (based upon a patch by Teemu Rantanen). - Fixed a 'const' in libsi/si.h (thanks to Marcel Wiesweg). - Fixed the 'su' call in 'runvdr' to make it work on systems that require the user name to appear before the command option (thanks to Robert Huitl). - Fixed testing for matching section filters in case they are turned off (thanks to Marcel Wiesweg). - In case of incomplete sections an error message is now logged only every 10 seconds. - Fixed a possible NULL pointer access in cEITScanner::Process() (thanks to Andreas Kool). - The actual transponder data is now taken from the NIT and existing channels are adjusted if necessary. If the NIT contains new transponders, they are scanned for channels during the next EPG scan. Note that only the satellite branches are tested, cable and terrestrial need to be tested by somebody who actually has such equipment.
2004-01-04Version 1.3.0vdr-1.3.0Klaus Schmidinger
- Changed thread handling to make it work with NPTL ("Native Posix Thread Library"). Thanks to Jon Burgess, Andreas Schultz, Werner Fink and Stefan Huelswitt. - The cThread class now accepts a 'Description' parameter, which is used to log the beginning and end of the thread, together with its process and thread id. For descriptions that need additional parameters you can use the function cThread::SetDescription(), which accepts 'printf()' like arguments. Existing plugins that use threads should be changed to use this functionality instead of explicit 'dsyslog()' calls inside their Action() function in order to support logging the thread ids. - Added "Slovak Link" and "Czech Link" to 'ca.conf' (thanks to Emil Petersky). However, 'ca.conf' is now pretty much obsolete due to the automatic CA handling. - Mutexes are now created with PTHREAD_MUTEX_ERRORCHECK_NP, which makes the 'lockingTid' stuff obsolete (thanks to Stefan Huelswitt). - Changed font handling to allow language specific character sets. - Adopted the small font character set from the "Elchi" patch (originally provided by Alessio Sangalli). - Greek language texts now use iso8859-7 character set (thanks to Dimitrios Dimitrakos). - Rearranged section data handling, so that the actual data handling can be done separately, even from within plugins. - The EPG data structures have been moved from eit.[hc] to epg.[hc] and have been adapted to the general VDR coding style. Plugins that use these data structures may need to change some function names (which should be obvious). The name 'subtitle' has been changed to 'shortText' to avoid clashes with actual subtitles that are part of a movie. The name 'extendedDescription' has been shortened to 'description'. - Replaced 'libdtv' with 'libsi' (thanks to Marcel Wiesweg), which is thread safe and can be used by multiple section filters simultaneously. - Added 'cRwLock' to 'thread.[hc]'. Note that all plugin Makefiles need to define _GNU_SOURCE for this to work (see the example plugin Makefiles and 'newplugin'). - Fixed a problem with crc32 in SI handling on 64bit systems (thanks to Pedro Miguel Sequeira de Justo Teixeira for reporting this one). - Fixed an alignment problem in CAM access on 64bit systems (thanks to Pedro Miguel Sequeira de Justo Teixeira for reporting this one). - Added 'StreamType' setting to CAM communication, which is important for Aston/SECA CAMs (thanks to Antonino Sergi). - Now the CA descriptors are sent to the CAM in the 'program' or 'ES level' sections, depending on where they are found in the PMT (thanks to Hans-Peter Raschke for reporting this one). This should make SkyCrypt CAMs work. - Now using the 'version number' of EPG events to avoid unnecessary work. - Channel data is now automatically derived from the DVB data stream (inspired by the 'autopid' patch from Andreas Schultz). - The current channel is now automatically re-tuned if the PIDs or other settings change. If a recording is going on on a channel that has a change in its settings, the recording will be stopped and immediately restarted to use the new channel settings. - EPG events now use the complete channel ID with NID, TID and SID. - Channel names in 'channels.conf' can now have a short form, as provided by some tv stations (see man vdr(5)). Currently channels that provide short names in addition to long ones are listed in the OSD as "short,long name", as in "RTL,RTL Television". The short names will be used explicitly later. - The Ca parameter in 'channels.conf' has been extended and now contains all the CA system ids for the given channel. When switching to a channel VDR now tests for a device that provides one of these CA system ids. The devices automatically get their supported ids from the CI handler. - The values in 'ca.conf' are currently without any real meaning. Whether or not a channel with conditional access can be received is now determined automatically by evaluating its CA descriptors and comparing them to the CA system ids provided by the installed CAM. Only the special values 1-16 are used to assign a channel to a particular device. - Increased the maximum number of possible OSD colors to 256. - Limited the line length in the EPG bugfix report, which appears to fix a buffer overflow that caused a crash when cleaning up the EPG data (at 05:00 in the morning).
2003-11-14Version 1.2.6vdr-1.2.6Klaus Schmidinger
- Final release of version 1.2.6.
2003-11-09Version 1.2.6pre6vdr-1.2.6pre6Klaus Schmidinger
- Fixed handling Priority -1 in cDvbDevice::ProvidesChannel() (thanks to Torsten Herz). - Fixed processing EPG data in case there is no title (thanks to Torsten Herz).
2003-11-08Version 1.2.6pre5vdr-1.2.6pre5Klaus Schmidinger
- Added cDevice::GetSTC() (suggested by Sven Goethel). - Added Asia-Pacific satellites to 'sources.conf' (thanks to Richard Scobie). - Added North American satellites to 'sources.conf' (thanks to Luke Jenkins). - Fixed getting the list of recordings in case VDR is started from a directory where it doesn't have access to (thanks to Dirk Mueller).
2003-10-26Version 1.2.6pre4vdr-1.2.6pre4Klaus Schmidinger
- Fixed handling CAM menus in case the CAM connection fails while the menu is being presented (thanks to Thomas v. Keller for reportign this one). - Added missing 'const' to some cChannel member functions (thanks to Torsten Herz).
2003-10-24Version 1.2.6pre3vdr-1.2.6pre3Klaus Schmidinger
- Improved cDvbDevice::StillPicture() (thanks to Oliver Endriss). - Continuing learning remote control keys in case one rc fails (thanks to Oliver Endriss). - Fixed handling comments in editing marks.
2003-10-19Version 1.2.6pre2vdr-1.2.6pre2Klaus Schmidinger
- Improved cDvbDevice::StillPicture() (thanks to Thomas Heiligenmann).
2003-10-17Version 1.2.6pre1vdr-1.2.6pre1Klaus Schmidinger
- Updated the required driver version in INSTALL (thanks to Jens Groth for reporting this one). - Fixed missing channel info after an incomplete channel group switch (thanks to Andreas Trauer). - Fixed handling a channels.conf that contains a ":@nnn" line as its last entry (thanks to Ralf Klueber). - Fixed detecting the /dev/videoN devices for GRAB in case there are others before the DVB devices (thanks to Andreas Kool). - Updated 'channels.conf.terr' for Berlin (thanks to Markus Hardt). - Fixed handling rc key learning in case cRemote::Initialize() returns 'false' (thanks to Oliver Endriss). - Fixed initializing the highlight area in cDvbSpuDecoder (thanks to Sven Goethel). - Now trying to get a timer's channel without RID when loading 'timers.conf' (thanks to Thomas Rausch). - Removed the unused 0x73 (TOT) filter in eit.c (thanks to Andreas Trauer). - Fixed extracting the ES data in cDvbDevice::StillPicture() (thanks to Stefan Huelswitt). - Added MPEG1 handling to cDvbDevice::StillPicture() (thanks to Thomas Heiligenmann). - Changed the default "Lifetime" to 99, which means that recordings will never be deleted automatically in case the disk runs full (suggested by Oliver Endriss). Note that in an existing VDR installation the current value as set in 'setup.conf' will still be used - this change only affects new VDR installations. - Edited recordings will now never be deleted automatically if the disk runs full (suggested by Emil Naepflein). - Channel IDs are now checked when reading 'channels.conf' to avoid later problems with timers.
2003-09-17Version 1.2.5vdr-1.2.5Klaus Schmidinger
- Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt).
2003-09-14Version 1.2.5pre3vdr-1.2.5pre3Klaus Schmidinger
- Fixed dropping out of replay mode while viewing a recording that is still going on (thanks to Oliver Endriss for reporting and helping to debug this one). - Fixed handling ':' characters in channel names when reading channels.conf (thanks to Reinhard Nissl for reporting this one). - Fixed the URL to the 'Doxygen' tool in INSTALL (thanks to Dirk Essl). - Removed the obsolete chapter "Stopping a recording on the primary DVB interface" from MANUAL. - Completed Dutch language texts (thanks to Hans Dingemans). - Made 'diseqc.conf' a required file only if Setup.DiSEqC is activated (thanks to Thomas Schmidt). - VDR now starts up even if 'keymacros.conf' references a plugin that is currently not loaded (suggested by Alexander Wetzel). - Fixed checking for VIDEO_STREAM_S in cRemux::SetBrokenLink() (thanks to Oliver Endriss). - Added 'repeat' function to keys '7' and '9' ("jump to mark") in replay mode (suggested by Oliver Endriss). - Made cOsdMenu::Display() virtual, which allows plugins to do some additional processing after calling the base class function (suggested by Jan Rieger). - Updated 'ca.conf' (thanks to Marco Franceschetti).
2003-09-07Version 1.2.5pre2vdr-1.2.5pre2Klaus Schmidinger
- Updated VIVA, VIVA Plus, MTV Central and MTV 2 in channels.conf (thanks to Sebastian Frei). - Changed "Studio Universal" to "Sci-Fi" in channels.conf. - Fixed a crash when using the --terminal option without having access to the given terminal (thanks to Steffen Barszus for helping to debug this one). - Added a note about the driver version needed for the still picture fix from version 1.2.5pre1 to work properly (thanks to Oliver Endriss for pointing this out). - Fixed setting the primary device in case none of the devices provides an MPEG decoder (thanks to Rene Bartsch for reporting this one). - Fixed handling the "Red" button in the "Schedules" menu in case there are no events listed for a particular channel (thanks to Christoph Hermanns for reporting this one). - When setting an editing mark while in "Pause" mode, replay now immediately jumps to the marked frame (thanks to Oskar Signell for pointing out this problem). - The DVB devices no longer send CA descriptors to the CAM while the EPG scanner is active (sometimes the CAMs got irritated when the device tuned to channels they couldn't handle).
2003-08-31Version 1.2.5pre1vdr-1.2.5pre1Klaus Schmidinger
- Now explicitly handling exit value 0 and 2 in 'runvdr'. - Added a missing 'w' to the allowed characters for Finnish and Swedish (thanks to Lauri Tischler and Ragnar Sundblad). - Added channels for DVB-T Hannover (Germany) to channels.cont.terr (thanks to Peter Waechtler). - Fixed a hangup in SVDRP when the client disappears without sending QUIT (thanks to Robert Bartl for reporting this one). The problem was introduced in version 1.2.2 through the fix for an occasional "Broken pipe" error in SVDRP connections. - Updated 'channels.conf.terr' for Berlin. - Fixed displaying still pictures, now using the driver's VIDEO_STILLPICTURE call directly (thanks to Oliver Endriss). This also improves navigating through DVD menus with the DVD plugin. If this causes problems with your particular system (maybe because you are using the 'analogtv' plugin) you can reactivate the previous behaviour by commenting out the line #define VIDEO_STILLPICTURE_WORKS_WITH_VDR_FRAMES in VDR/dvbdevice.c. Note that you need driver version 2003-08-23 or later for this to work! - Fixed handling extra blanks in plugin command lines. - Actually implemented the SVDRP command DELC. - Now clearing the player device if there are too many poll timeouts in 'Transfer Mode', which avoids buffer overflows and black screens in such cases.
2003-08-26Version 1.2.4 (not officially released)vdr-1.2.4Klaus Schmidinger
- Fixed 'runvdr' to stay in the loop only if VDR returns an exit status of '1'. - Completed the Finnish OSD texts (thanks to Rolf Ahrenberg). - Empty values in setup.conf are no longer treated as an error (thanks to Andreas Kool for reporting this one). - Added a note about the config files of plugins to INSTALL (thanks to Thomas Keil). - VDR now continues to start up, even if there is an error in setup.conf. - Fixed a bug in resetting OSD color palettes (thanks to Torsten Herz). - Fixed starting a recording on the primary device if there is a replay session active (thanks to Javier Marcet for reporting this one). - Avoiding an unnecessary stop of an ongoing Transfer Mode when starting a recording on the primary device.
2003-08-17Version 1.2.3 (not officially released)vdr-1.2.3Klaus Schmidinger
- Fixed the TS to PES repacker so that it works with MPEG1 streams (thanks to Andreas Kool). - Fixed keeping track of the current channel number when moving channels in the "Channels" menu (thanks to Mirko Günther for reporting this one). - Made the plugin library directory configurable via Make.config (thanks to Ludwig Nussel). - Fixed scaling SPU bitmaps in Letterbox mode when playing NTSC material. In order to do this, the cDevice was given a new member function GetVideoSystem(). - Fixed two warnings when compiling with gcc 3.3.1 (thanks to Alfred Zastrow for reporting this). - Made crc32() a static function in libdtv/libsi/si_parser.c to avoid a name clash when using other libraries that also implement a function by that name (thanks to Reinhard Nissl for reporting this one). - Fixed staying off the end of an ongoing recording while replaying in time shift mode (thanks to Rainer Zocholl for reporting this one). - VDR now stops with exit status 2 if one of the configuration files can't be read correctly at program startup (suggested by Rainer Zocholl). - Fixed a crash when starting "Pause live video" twice within the same minute on the same channel. - Fixed freezing replay if a timer starts while in Transfer Mode from the device used by the timer, and the timer needs a different transponder (thanks to Richard Robson for reporting this one). - Fixed toggling channels with the '0' key (thanks to Mirko Günther for reporting this one). - Made the "Zap timeout" (the time until a channel counts as "previous" for switching with '0') a setup variable, available in "Setup/Miscellaneous" (suggested by Helmut Auer). - Removing deleted recordings faster than normal when cutting, to avoid running out of disk space (thanks to Manfred Schmidt-Voigt for reporting this one).
2003-08-03Version 1.2.2vdr-1.2.2Klaus Schmidinger
- Fixed a bug in channel switching after Left/Right has been pressed (thanks to Michael Walle for reporting this one). - Improved channel switching in case of numerical input by switching as soon as the channel is unique (suggested by Jaakko Hyvätti). - Fixed creating a new channel in the "Channels" menu in case the 'channels.conf' contains ':@nnn' lines with no text (thanks to Guy Roussin for reporting this one). - Changed the behaviour of the '0' key in normal viewing mode so that a channel only qualifies as "previous" if it has been selected for at least 3 seconds (suggested by Thomas Keil). - Now clearing the channel info display when entering numeric keys to switch channels (suggested by Guy Roussin). - Added missing I18N entry for "Ppid" (thanks to Rolf Ahrenberg). - Fixed handling the color buttons in the "Edit channel" menu (thanks to Thomas Keil for reporting this one). - Fixed an occasional "Broken pipe" error in SVDRP connections (thanks to Gerhard Steiner for reporting this one). - Fixed checking CA capabilities with the dvb-kernel driver (thanks to Kenneth Aafløy). - Fixed selecting the device, because sometimes an FTA recording terminated a CA recording (thanks to Emil Naepflein). - Fixed a possible crash in case a VFAT file system is used without compiling VDR with VFAT=1 (thanks to Ernst Fürst for reporting this one). - Now the program uses the values of VIDEODIR and PLUGINDIR defined in Makefile or Make.config as defaults (thanks to Steffen Barszus). - Added the usual menu timeout to the CAM menus.
2003-06-09Version 1.2.1vdr-1.2.1Klaus Schmidinger
- Fixed OSD access in case none of the devices provides one (thanks to Axel Gruber for reporting this one). - Fixed editing channels ('timers.conf' was not written after a channel has been modified, which could result in errors upon the next start of VDR). - Fixed a crash when canceling a newly created timer (thanks to Thomas Schmidt for reporting this one). - Completed Hungarian language texts (thanks to Istvan Koenigsberger and Guido Josten). - Fixed device handling in the CICAM menu in case a VDR instance was started with a specific device using the -D option (thanks to Gerald Raaf for reporting ths one). - Initializing the current channel to '1' to avoid a crash in creating a new timer in case there is no device in the system that can actually receive any channel (thanks to Malcolm Caldwell for reporting this one). - Some corrections to the Finnish OSD texts (thanks to Niko Tarnanen and Rolf Ahrenberg).
2003-06-01Version 1.2.0vdr-1.2.0Klaus Schmidinger
- Completed Greek language texts (thanks to Dimitrios Dimitrakos). - Completed Polish language texts (thanks to Michael Rakowski). - Added a note about NPTL ("Native Posix Thread Library") to the INSTALL file (thanks to Jon Burgess for pointing this out). - Some corrections to the Finnish OSD texts (thanks to Jaakko Hyvätti). - Officially released as version 1.2.0.
2003-05-30Version 1.2.0pre1vdr-1.2.0pre1Klaus Schmidinger
- Some corrections to the French OSD texts (thanks to Olivier Jacques). - Fixed some missing commas in i18n.c (thanks to Dimitrios Dimitrakos for reporting this problem). - Some corrections to the Finnish OSD texts (thanks to Niko Tarnanen and Rolf Ahrenberg). - Completed the Italian OSD texts (thanks to Antonio Ospite). - Fixed breaking off replay in case the user hits "Play" or "Pause" too soon after going into "Pause live video" mode (thanks to Karim Afifi for reporting ths one). - Some corrections to the Catalanian OSD texts (thanks to Jordi Vilà). - Single event timers are now deleted if the recording they are doing is deleted before the timer ends. - Fixed an uninitialized variable in cDisplayChannel (thanks to Stefan Huelswitt). - Fixed a possible access of invalid file handles in cSIProcessor::Action() (thanks to Stefan Huelswitt).
2003-05-25Version 1.1.33vdr-1.1.33Klaus Schmidinger
- Modified handling of audio packets in cDvbPlayer for better sync with external AC3 replay (thanks to Werner Fink). - Fixed a memory leak in cNonBlockingFileReader (thanks to Stefan Huelswitt). - Completed the French OSD texts (thanks to Gregoire Favre). - Completed the Finnish OSD texts (thanks to Niko Tarnanen and Rolf Ahrenberg). - Fixed I/O handling in case an explicit controlling terminal is given (thanks to Oliver Endriss). - Fixed resume file handling in case the resume.vdr file can't be written (thanks to Gerhard Steiner). - Fixed cutting a recording if there is only a single editing mark (thanks to Ralf Klueber for reporting this one). - Fixed volume display in case a plugin has its own OSD open (thanks to Marcel Wiesweg). - Fixed channel switching in the EPG scanner on single device systems. - Completed the Swedish OSD texts (thanks to Tomas Prybil). - Now switching to the channel used by the most recently started timer in case the original current channel becomes unavailable due to a recording on a different transponder. If this fails, a channel up/down switch is attempted as a fallback solution (thanks to Lauri Tischler for reporting this one, and to Hermann Gausterer for suggesting to switch to the recording channel). - Fixed cReplayControl::Show() to avoid a compiler warning in g++ 3.2.3 (thanks to Jan Ekholm for reporting this one). - Completed the Slovenian OSD texts (thanks to Matjaz Thaler). - Changed the DEFAULTPRIORITY in device.c to -1, so that the primary device will be used for FTA recordings in case the CAM is connected to a non-primary device (thanks to Reinhard Walter Buchner for reporting this one). - The cCiHandler now closes its file handle when it gets destroyed. - Checking for duplicate recordings with the same file name and disabling the second timer (thanks to Peter Bieringer for reporting this one). - Fixed handling newly created timers in case they are not confirmed with "Ok" (thanks to Gerhard Steiner for reporting this one). - It is now possible to directly delete a timer that is currently recording (thanks to Alexander Damhuis for reporting this one).
2003-05-18Version 1.1.32vdr-1.1.32Klaus Schmidinger
- Removed a faulty parameter initialization in menu.c (thanks to Lauri Tischler for reporting this one). - Re-implemented the WaitForPut/WaitForGet stuff in cRingBuffer, since some plugins actually need this. By default the buffer does not wait; if a plugin needs the waiting functionality it can call the new SetTimeouts() function. - Moved the call to cPlugin::Start() further up in vdr.c, to make sure it gets called before trying to learn the keys (problem reported by Oliver Endriss). - No longer starting the editing process if no marks have been set (thanks to Matthias Raus for reporting this one). - Added Catalanian language texts (thanks to Marc Rovira Vall and Ramon Roca). Plugin authors may want to add the new entries to their I18N texts and contact the translators to have their texts translated. Note that there are now 16 different OSD languages, so please make sure you have 16 versions for each of your texts. - Moved the detection of a broken video data stream from the cDevice into the cRecorder to avoid problems with cReceivers that want to receive from PIDs that are currently not transmitting (thanks to Marcel Wiesweg for reporting this one). - Fixed setting the locking pid after a timed wait (thanks to Andreas Schultz). - Avoiding spurious section filter settings after a channel switch. - Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt). - Fixed reading 'epg.data' for channels with non-zero RID (thanks to Oliver Endriss for reporting this one). - Fixed EPG bugfix statistics to avoid log entires for undefined channels (thanks to Lars Bläser for reporting this one). - No longer waiting inside cIndexFile::CatchUp() to avoid shortly blocking replay at the end of a recording.
2003-05-11Version 1.1.31vdr-1.1.31Klaus Schmidinger
- Introduced the new function cPlugin::Initialize(), in order to be able to separate the startup of a plugin into an "early" (Initialize()) and "late" (Start()) phase (suggested by Andreas Schultz). Plugin authors should please read the section about "Getting started" in PLUGINS.html and adapt their code if applicable. - Implemented the CableDeliverySystemDescriptor and TerrestrialDeliverySystemDescriptor in libdtv (thanks to Sven Grothklags and Andreas Schultz). - Fixed keeping live video active in case the primary device doesn't have an MPEG decoder (thanks to Wolfgang Goeller for reporting this one). - Implemented cDevice::ActualDevice(), which returns the actual receiving device in case of 'Transfer Mode', or the primary device otherwise. This may be useful for plugins that want to attach a cReceiver to the device where the current live video is actually coming from. - Added VDRVERSNUM to config.h, which can be used by the preprocessor to check the actual VDR version (suggested by Stefan Huelswitt). - Removed the WaitForPut/WaitForGet stuff from cRingBuffer, since it appears to no longer be necessary due to the implementation of cNonBlockingFileReader in dvbplayer.c. Also, the long timeout in WaitForPut caused problems with cReceivers that use a ring buffer and didn't immediately return from their Receive() function if the buffer runs full (thanks to Sascha Volkenandt for reporting this one). - Fixed handling EPG data where the "extended event descriptor" comes before the "short event" or a "time shifted event" (thanks to Jonan Santiago). - Disabled the "Received stuffing section in EIT" log message. - Updated 'channels.conf.terr' for Berlin (thanks to Juri Haberland). - Avoiding short display of the "Main" menu when pressing the "Recordings" button or the "Back" button during replay. - Further increased the timeout until an index file is considerd no longer to be written. - Implemented separate PausePriority and PauseLifetime parameters for the recordings created when pausing live video (suggested by Alfred Zastrow). - Changed C++ style comments in libdtv into C style to avoid warnings in gcc 3.x (thanks to Andreas Schultz).
2003-05-04Version 1.1.30vdr-1.1.30Klaus Schmidinger
- Fixed minimum lifespan of deleted recordings (thanks to Jaakko Hyvätti). - Updated French OSD texts (thanks to Olivier Jacques). - Fixed paging through lists with repeated Left/Right keys. - Fixed setting the PCR-PID in case it is equal to one of the other PIDs (thanks to Oliver Endriss for reporting this one). - Fixed double call to MainMenuAction() of a plugin if invoked via a hotkey (thanks to Kai Moeller for reporting this one). - Fixed handling dedicated keys. - Now turning off live PIDs when replaying. This avoids short spikes from other channels when switching between Transfer Mode channels, and also lets an ongoing replay continue even if a recording is started on the primary device. - The RCU channel display no longer changes when a recording on a different channel starts on the primary device. - Restoring the current channel in case a recording has switched the transponder. If all devices are busy and none of them can provide the current channel, the message "Channel not available!" will be displayed. - Removed the (no longer necessary) 'panic' stuff from cThread. - Added cStatus::OsdItem() to provide the entire list of menu items to a plugin (thanks to Carsten Siebholz). - The red ("Record") and yellow ("Pause") button in the "Main" menu are no longer available when replaying.
2003-04-27Version 1.1.29vdr-1.1.29Klaus Schmidinger
- Fixed detecting broken connection to the LIRC daemon (thanks to Ludwig Nussel). - Now sending CA descriptors to the CAM in the same sequence as they were originally received (thanks to Stefan Huelswitt). - The PCR PID can now be set separately from the video PID. The syntax in the 'channels.conf' file is, for example, ...:164+17:..., where 164 is the video PID and 17 is the PCR PID. The separator is a '+' sign, not a comma or semicolon as with the audio PIDs, because this is not an alternate PID, but rather an additional, necessary PID. In order to use this feature you need a driver version dated 2003-04-27 or higher (setting the PCR PID didn't work in earlier versions). - Fixed deleting the last recording in the "Recordings" menu, which started pausing live video (thanks to Christoph Friederich for reporting this one). - Now setting the "broken link" flag for GOPs at the beginning of a new video sequence, which avoids artefacts when cutting (thanks to Stefan Huelswitt). - Removed the Mute() call from cDvbDevice::StillPicture() (suggested by Andreas Schultz). - Updated 'channels.conf.terr' for Berlin (thanks to Andreas Brachold). - Extended logging info when starting/stopping timers to show the channel number, start/stop time and the file name (suggested by Manuel Hartl). - Added a note regarding non-VDR files in the /videoX directories to INSTALL (suggested by Benjamin Harling). - Skipping keys that come in too fast from LIRC (thanks to Christian Jacobsen). - Avoiding short display of the main menu if a plugin displays its own OSD and is started through a user defined key macro (thanks to Andreas Mair for reporting this one). - Reduced the time to wait for EPG data when starting a recording to 3 seconds. - The new SVDRP command STAT can be used to request information about the disk usage (thanks to Thomas Koch). - Fixed faulty calculation of section length in eit.c (thanks to Teemu Rantanen).
2003-04-21Version 1.1.28vdr-1.1.28Klaus Schmidinger
- Using masks in EIT filtering to reduce the number of filters (thanks to Andreas Schultz). - Fixed handling Ca descriptors (thanks to Stefan Huelswitt). - Now only those Ca descriptors are sent to a CAM that are actually understood by that CAM. - Re-enabled CAM communication during replay and on non-Ca channels. This requires a DVB driver with firmware version 2613 or later. - It is now possible to do simultaneous recording and replay with a single DVB card, even with encrypted channels. This requires the use of the Link Layer firmware, version 2613 or higher; the -icam firmware is still limited to live encrypted channels only. Finally we have time shift for encrypted channels on single card systems! - Enhanced detection of pending user I/O from CAMs to avoid sluggish reaction to remote control keypresses. - Implemented "pause live video". You can now press "Menu/Yellow" or "Pause" on your remote control while watching live video to start an instant recording of the current programme and immediately start replaying that recording.
2003-04-13Version 1.1.27vdr-1.1.27Klaus Schmidinger
- The CAM is now accessed only if the current channel actually has a non-zero Ca value, and CAM access is completely suppressed during replay, which avoids problems in case the CAM is attached to the primary DVB device. - The "Left" and "Right" buttons now set the cursor to the first or last list item even if the list consist only of a single page, like, for instance, the Main menu (thanks to Oliver Endriss). - Made the log message "OSD window width must be a multiple of 4..." a debug message instead of an error message, so it can be avoided by using a log level less than 3. - Updated Greek language texts (thanks to Dimitrios Dimitrakos). - Fixed faulty behaviour of the "Mute" key in case the channel display is visible (thanks to Florian Bartels for reporting this one and Sascha Volkenandt for helping to fix it). - Modified LOF handling to allow for C-band reception (thanks to Malcolm Caldwell). - Added some missing cAudio handling calls (thanks to Werner Fink). - Replaced the 'for' loops in StripAudioPackets() with memset() calls (thanks to Werner Fink). - Further increased the timeout until an index file is considerd no longer to be written. - Fixed a crash in case the index file can't be accessed any more during replay (thanks to Stefan Huelswitt for reporting this one). - Fixed displaying messages in the status line in case they exceed the OSD width (thanks to Gerhard Steiner for reporting this one). - Avoiding high CPU load in case the connection to LIRC gets lost (thanks to Ludwig Nussel). - Fixed handling repeat function with LIRC (thanks to Ludwig Nussel). - Fixed handling min/max borders when entering integer values (thanks to Andy Grobb for reporting this one). - Implemented a "resume ID" which allows several users to each have their own resume.vdr files (thanks to Martin Hammerschmid). This parameter can be set in the "Setup/Replay" menu (see MANUAL for details). - Now using 'libdtv' version 0.0.5 (thanks to Rolf Hakenes for the new version and Stefan Huelswitt for adapting VDR to it). - If no device with an MPEG decoder can be found at startup, the first device is now used as primary device (just to have some device). - Adjusted some Premiere channels in 'channels.conf' (thanks to Thomas Koch). - Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt). - The 'epg.data' file is now read after all plugins have been started (thanks to Sascha Volkenandt). - The LIRC remote control no longer tries to learn keys if it can't connect to the LIRC daemon (thanks to Ludwig Nussel for reporting this one). The same applies to the RCU remote control in case of errors during startup. - Fixed handling of Ca parameters with values <= MAXDEVICES, which don't indicate an actual encrypted channel (thanks to Stefan Huelswitt for reporting this one).
2003-03-19Version 1.1.26vdr-1.1.26Klaus Schmidinger
- Removed signal handling and usleep(5000) from cDvbOsd::Cmd() (apparently this is no longer necessary with DVB driver 1.0.0pre2 or later). - If the primary device (as defined in setup.conf) doesn't have an MPEG decoder (and thus can't be used as a primary device) VDR now scans all devices at startup and uses the first one (if any) that actually has an MPEG decoder. That way this will also work automatically if the primary device is implemented by a plugin. - Fixed a possible deadlock when using the "Blue" button in the "Schedules" menu to switch to an other channel (thanks to Torsten Herz). - Fixed the EPG bugfix code number for the MAX_USEFUL_SUBTITLE_LENGTH fix (thanks to Torsten Herz for reporting this one). - Modified the EPG scanner to avoid CPU load peaks (thanks to Steffen Becker for reporting this one). - Fixed support for Viaccess CAMs (thanks to Axel Gruber for helping to debug this).
2003-02-16Version 1.1.25vdr-1.1.25Klaus Schmidinger
- Fixed high CPU load during replay (thanks to Marcel Wiesweg for pointing out this one). - Fixed margin handling in cRingBufferLinear. - Now polling the output device in 'Transfer Mode' and retrying to put packets into the ring buffer. - Resetting the CAM slot in case communication breaks down. - Improved keyboard detection (thanks to Werner Fink). - Updated 'channels.conf.terr' (thanks to Andy Carter). - Fixed broken support for raw OSDs of plugins (thanks to Marcel Wiesweg for reporting this one). - Broken CAM connections are now restored automatically.
2003-02-09Version 1.1.24vdr-1.1.24Klaus Schmidinger
- Improved CAM handling (thanks to Reinhard Walter Buchner for a great deal of help in debugging this). It is now possible to insert the CAM in any of the two slots, to insert and remove it while VDR is running and even to have two CAMs inserted. - Turning SI filtering off and on when switching channels. - Timers are now processed even if an OSD menu is open (except for menus that explicitly handle timers).
2003-02-02Version 1.1.23vdr-1.1.23Klaus Schmidinger
- Fixed a new/delete malloc/free mismatch in ringbuffer.c (thanks to Stefan Huelswitt for reporting this one). - Improved CAM handling.
2003-01-26Version 1.1.22vdr-1.1.22Klaus Schmidinger
- Added 'Hrvatska radiotelevizija' and 'RTV Slovenija' to ca.conf (thanks to Paul Gohn). - Implemented actual user input for CAM enquiry menus. - Since disk file systems apparently don't honor the O_NONBLOCK flag to read from a file in non-blocking mode the cDvbPlayer now uses a non blocking file reader class to make sure replay remains smooth even under heavy system load. - Increased the maximum possible packet size in remux.c to avoid corrupted streams with broadcasters that send extremely large PES packets (thanks to Teemu Rantanen). - Added TS error checking to remux.c (thanks to Teemu Rantanen). - Modified cRingBufferLinear to avoid excessive memmove() calls in 'Transfer Mode' and during recordings, which dramatically reduces CPU load. Thanks to Teemu Rantanen for pinpointing the problem with the excessive memmove() calls. - Updated 'channels.conf' (thanks to Achim Lange). - Added/improved Swedish language texts (thanks to Jan Ekholm). - Fixed the description of the "Scroll pages" OSD setup parameter ('yes' and 'no' were mixed up). - Fixed handling the LOG_LOCALn parameters in the -l option (thanks to Dimitrios Dimitrakos). - Changed EIT processing to always read a full section. - Fixed handling user defined CFLAGS in libdtv/libvdr/Makefile (thanks to Clemens Kirchgatterer and Robert Schiele). - Fixed skipping unavailable channels in the EPG scanner.
2003-01-10Version 1.1.21vdr-1.1.21Klaus Schmidinger
- Fixed the 'channels.conf' entries for "Studio Universal" and "Disney Channel". - Fixed handling channels in the "Channels" menu in case there are ':@nnn' group separators without names (thanks to Guy Roussin for reporting this one). - The SVDRP command CHAN now also accepts channel IDs. - Increased the timeout until an index file is considerd no longer to be written (sometimes in time shift with heavy system load the index file was closed too early by the replay thread). - Implemented "Link Layer" based CAM support, which hopefully will solve the problems with CAMs we had in the past. To use this you need the driver version 2002-01-08 or higher (with the new firmware supporting the "Link Layer" protocol). - Added an EPG bugfix that moves the Subtitle data to the Extended Description in case the latter is empty and the Subtitle exceeds some useful length. - Since several channels put very long strings into the Subtitle part of their EPG data, that string is now limited in length when used in a recording's file name.
2002-12-15Version 1.1.20vdr-1.1.20Klaus Schmidinger
- Now checking if there is a connection to the keyboard (thanks to Jaakko Hyvätti) and only creating the KBD remote control if VDR is running in the foreground. - Fixed taking an active SVDRP connection into account when doing shutdown (thanks to Gregoire Favre for reporting this one). - Changed setting of CXX and CXXFLAGS variables in Makefile, so that an externally defined value will be taken if present (suggested by Robert Schiele). Plugin authors should please change the lines CXX = g++ CXXFLAGS = -O2 -Wall -Woverloaded-virtual in their Makefile to CXX ?= g++ CXXFLAGS ?= -O2 -Wall -Woverloaded-virtual - Fixed recording overlapping timers on the same channel in case DO_REC_AND_PLAY_ON_PRIMARY_DEVICE and/or DO_MULTIPLE_RECORDINGS is not defined (thanks to Jaakko Hyvätti). - No longer stopping/restarting the DMX when switching audio channels (thanks to Sven Goethel). - Fixed high CPU load in 'Transfer Mode' (thanks to Oliver Endriss). - If a PC keyboard is used as remote control, the string entry fields in the menus now accept character input directly (however, this works only for keys that are not otherwise defined as remote control keys). Also, plugins can switch the cKbdRemote class into "raw mode", where all keyboard input will be made available through the new 'kKbd' key code and none of it will be processed as normal remote control functions (thanks to Jan Rieger for suggestions and testing). - Fixed deleting characters in string entry fields in 'insert' mode. - Now using "Doxygen" to generate source documentation (thanks to Walter Stroebel for providing an initial 'Doxyfile' configuration and adjusting some comments). See INSTALL for information how to do this. Some function descriptions have already been adapted to Doxygen, more will follow.
2002-12-08Version 1.1.19vdr-1.1.19Klaus Schmidinger
- The character '|' in description texts of EPG records is now interpreted as a newline character (suggested by Gerhard Steiner). - Updated 'channels.conf.cable' (thanks to Andreas Kool). - Improved handling of repeated remote keys. - The RCU now only sets the channel number display when there are no incoming remote control keys, which improves reaction on repeated keys. - The actual tuning is now done in a separate thread, which makes zapping through the channels a lot faster and no longer gets stuck on channels that don't broadcast. This also makes "Motor-DiSEqC" work (thanks to Reinhard Walter Buchner for his help in testing this). Since switching channels now no longer explicitly waits for a channel lock in the foreground thread, the "panic level" mechanism is no longer used (maybe we don't need it any more, anyway). - The keyboard is now by default always active to control VDR. The 'make' option REMOTE=KBD is therefore obsolete. When compiling VDR with REMOTE=RCU or REMOTE=LIRC, the keyboard can thus now be active together with the remote control. If you want to build VDR _without_ keyboard support you can set NO_KBD=1 in the 'make' call. Since the keyboard codes are now different from the ones used previously (which were mapped by the 'ncurses' library) you will need to go through the "Learning keys" procedure again. To do so, either delete the file /video/remote.conf or remove the KBD.* entries from it before starting this version of VDR. (Thanks to Thomas Sailer for pointing out how to set the terminal parameters to read from the keyboard). - The 'ncurses' library is now only necessary when compiling VDR with DEBUG_OSD=1.
2002-12-01Version 1.1.18vdr-1.1.18Klaus Schmidinger
- Fixed missing initialization of 'number' in cChannel (thanks to Martin Hammerschmid for reporting this one). - Fixed a misplaced ')' in the fix about the stale lock files (thanks again to Oliver Endriss for pointing this out - it was my fault). - Group delimiters in the 'channels.conf' file that have no text (like a simple ":" or ":@201") no longer show up in the Channels menu (suggested by Guy Roussin). - Added "Tele 5" to 'channels.conf' (thanks to Georg Hitsch). - Changed the source directory name for plugins from 'SRC' to 'src' (suggested by Clemens Kirchgatterer). - Removed transponders 10788, 11739 and 12266 from 'channels.conf' (apparently they are no longer active). - Deactivated some templates in tools.h in case some plugin needs to use the STL (suggested by Gerald Berwolf). - Timers now accept channel IDs even if the 'source' is 0 (thanks to Stefan Huelswitt for reporting this one). - Now taking an active SVDRP connection into account when doing shutdown or housekeeping (suggested by Emil Naepflein). - Macros in 'keymacros.conf' can now use "@plugin" to directly access the main menu function of a given plugin (see man vdr(5) for details). - The new plugin 'sky' can be used to integrate a Sky Digibox into the VDR system, using a Kfir MPEG2 encoder card (see PLUGINS/src/sky/README for details).
2002-11-24Version 1.1.17vdr-1.1.17Klaus Schmidinger
- Added new entries to 'ca.conf'. - Fixed closing unused PID handles (thanks to Stefan Schluenss for reporting this one). - Added more examples to 'diseqc.conf' (thanks to Oliver Endriss). - Fixed disabling multiple recordings on a single DVB card (comment out the definition of the macros DO_REC_AND_PLAY_ON_PRIMARY_DEVICE and DO_MULTIPLE_RECORDINGS in dvbdevice.c). - Plugins can now have their very own OSD setup in the object they return from a call to cPlugin::MainMenuAction(). In order to implement this, the return type of cPlugin::MainMenuAction() had to be changed from (cOsdMenu *) to (cOsdObject *). So in case you are compiling an existing plugin with this version of VDR and you get an error message, simply change cOsdMenu to cOsdObject in the plugin's source for the MainMenuAction() function. Plugin authors who have so far (ab)used the cControl mechanism to implement their own raw OSD should take a look at the new demo plugin 'osddemo'. It implements a very primitive game that shows how a plugin can have its own raw OSD. Especially look into cLineGame and see how it implements the Show() function. See also the chapter on "User interaction" in PLUGINS.html. - Added three new fields to the lines in 'channels.conf': NID, TID and RID. NID and TID are the Network and Transport Stream IDs, respectively. RID is an additional ID that can be used to tell apart channels that would otherwise be indistinguishable. This is typically the case with radio channels, which may have the same NID, TID and SID, but different "radio IDs". This new field is therefore called RID ("radio ID"). Currently NID and TID are not yet used by VDR and should always be 0. The RID is actually used when building the "unique channel ID", so if you have channels in your 'channels.conf' file that cause error messages when loading, you can set the RIDs of these channels to different values. When reading an old 'channels.conf' these new fields will be automatically initialized to 0 and once the file is written back to disk they will be appended to the channel definitions. Thanks to Régis Bossut for pointing out that with some providers the channels can only be distinguished through the RID. - The "unique channel ID" now contains an optional 5th part (the RID). See man vdr(5). - Updated 'channels.conf.cable' and made some channels unique using the new RID (thanks to Andreas Kool for pointing out the problems). - Made some channels unique in 'channels.conf.terr' using the new RID. - Extended the '-l' option to allow logging to LOG_LOCALn (n=0..7) by writing, for instance, '-l 3.7' (suggested by Jürgen Schmidt). - Now deleting stale lock files if they have a time stamp that is outside the window 'now +/- LOCKFILESTALETIME'. This improves things in cases where the system time makes far jumps, so that a lock file might end up with a time stamp that lies in the distant future (thanks to Oliver Endriss).
2002-11-10Version 1.1.16vdr-1.1.16Klaus Schmidinger
- Fixed saving the polarization parameter of channels that have a number in the 'source' parameter (thanks to Peter Seyringer for reporting this one). - Updated 'channels.conf.terr' (thanks to Andy Carter). - Updated 'channels.conf.cable' (thanks to Achim Lange). - First step towards a "unique channel ID". The channel ID is a human readable string, made up from several parameters of the channel's definition in the file 'channels.conf' (see man vdr(5) for details). In order for the "unique channel ID" to work, all channel definitions now must be unique with respect to the combination of their Source, Frequency and SID parameters. You may have to fix your 'channels.conf' manually if there are error messages in the log file when loading it. BE SURE TO MAKE A BACKUP COPY OF YOUR 'channels.conf' AND 'timers.conf' FILE BEFORE SWITCHING TO THIS VERSION, AND CHECK VERY CAREFULLY WHETHER YOUR TIMERS ARE STILL SET TO THE RIGHT CHANNELS! When reading an existing 'timers.conf', the channels will be identified as before by their numbers. As soon as this file is written back, the channel numbers will be replaced by the channel IDs. After that it is possible to manually edit the 'channels.conf' file and rearrange the channels without breaking the timers. Note that you can still define new timers manually by using the channel number. VDR will correctly identify the 'channel' parameter in a timer definition and use it as a channel number or a channel ID, respectively. Also, the SVDRP commands that return timer definitions will list them with channel numbers in order to stay compatible with existing applications. The channel ID is also used in the 'epg.data' file to allow EPG information from different sources to be stored, which would previously have been mixed up in case they were using the same 'service ID'. Note that the contents of an existing 'epg.data' file from a previous version will be silently ignored, since it doesn't contain the new channel IDs. When inserting EPG data into VDR via SVDRP you now also need to use the channel IDs. Currently the EPG data received from the DVB data stream only uses the 'Source' and 'Service ID' part of the channel ID. This makes it work for channels with the same service IDs on different sources (like satellites, cable or terrestrial). However, it doesn't work yet if the service IDs are not unique within a specific source. This will be fixed later. - Added missing SID parameters to 'channels.conf'. Some channels have been removed since they are apparently no longer broadcasted. - Removed dropping EPG events from "other" streams that have a duration of 86400 seconds or more (was introduced in version 1.1.10). This has become obsolete by the modification in version 1.1.13, which fixed fetching the current/next information to handle cases where the duration of an event is set wrongly and would last beyond the start time of the next event. Besides, the change in 1.1.10 broke handling EPG data for NVOD channels. - Fixed a compiler warning regarding cMenuChannels::Del() and MenuTimers::Del() hiding the base class virtual functions.
2002-11-03Version 1.1.15vdr-1.1.15Klaus Schmidinger
- Completely switched to the new CVS HEAD version of the linux-dvb driver. The NEWSTRUCT compile time switch is now obsolete. The required driver is now the CVS HEAD version dated 2002-11-01 or later. - Adjusted the INSTALL file to the 1.1.x version. - Only accepting key presses from the current remote control when learning (thanks to Oliver Endriss). - Fixed the EPG scanner, which broke 'Transfer Mode' as soon as it kicked in (thanks to Oliver Endriss for reporting this one). - Fixed handling audio tracks in cDvbDevice. - Updated channels.conf.terr (thanks to Uwe Scheffler). - Fixed displaying the group separators in the channel display (thanks to Martin Hammerschmid for pointing out this one). - The Makefile now includes the file Make.config (if present in the VDR source directory), which allows the user to overwrite several settings with individual values (suggested by Andreas Schultz). The VDR distribution archive does not contain this file in order to not overwrite a user defined file. There is a Make.config.template which contains the default values of the macros the user can overwrite. - Since there have been changes to the 'newplugin' script authors of plugins may want to newly create their plugins' Makefiles with the new version of this script, and adapt them to their individual needs (make sure you don't overwrite your existing plugin directory - make a backup copy first!). - Fixed reading EPG data via the SVDRP command PUTE (it changed the current service ID). - Fixed closing all dup'ed file descriptors in cPipe. - Implemented a plugin interface for additional audio processing (see PLUGINS.html under "Dolby Digital"). The functionality of the '-a' command line option has been reactivated. Since the author doesn't have any Dolby Digital equipment this may or may not work as expected. There may still be some places where a call to cAudios::Clear() or cAudios::Mute() is necessary. Those with Dolby Digital equipment should please take a look at this and maybe send patches. Replaying Dolby Digital in ways other than through VDR's '-a' option will have to be implemented as plugins. Those who have written patches for VDR version 1.0.x should convert their work into the proper plugins for version 1.1.x. Note to authors of cPlayer derived plugins: please read the modified comments in device.h regarding the member functions cDevice::Clear(), cDevice::Mute() and cDevice::PlayAudio(). Derived classes must call these base class member functions to make sure all registered cAudio objects are properly handled. Also note that the return type of cDevice::PlayAudio() has been changed to 'void', since this function always has to accept the entire data block immediately and there is nothing that could be reasonably done in case an error occurs in one of the cAudio objects. - Now checking the driver's DVB_API_VERSION in dvbdevice.h. Since VDR now requires a driver dated 2002-11-01 or later the MIN_DVB_DRIVER_VERSION_FOR_TIMESHIFT and DVB_DRIVER_VERSION stuff has been replaced with DO_REC_AND_PLAY_ON_PRIMARY_DEVICE, which can be used to disable simultaneous recording and replaying on the primary DVB device in case there are problems with this.
2002-10-27Version 1.1.14vdr-1.1.14Klaus Schmidinger
- Fixed some faulty default parameter initializations (thanks to Robert Schiele). - Added further satellites to 'sources.conf' (thanks to Reinhard Walter Buchner and Oliver Endriss). - Updated Finnish OSD texts (thanks to Jaakko Hyvätti). - Fixed a small glitch when switching channels (thanks to Dennis Noordsij for reporting this one). - Fixed handling multiple 'CaCaps' entries in 'setup.conf'. - Group separators in 'channels.conf' may now be given like ':@201 My Channels', where '@201' indicates the number to be given to the next channel. This can be used to create 'gaps' in the channel numbering (see 'man 5 vdr'). BE CAREFUL TO UPDATE YOUR 'timers.conf' ACCORDINGLY IF INSERTING THIS NEW FEATURE INTO YOUR 'channels.conf' FILE! - Timers now internally have a pointer to their channel (this is necessary to handle gaps in channel numbers, and in preparation for unique channel ids). - Fixed slow reaction on SVDRP input (thanks to Guido Fiala for reporting this one). - Added KI.KA to channels.conf.cable (thanks to Robert Schiele). - Frequency values for cable and terrestrial channels in 'channels.conf' can now be given either in MHz, kHz or Hz. The actual value given will be multiplied by 1000 until it is larger than 1000000. - Fixed skipping unavailable channels when zapping downwards. - Fixed checking the Ca() status of a cDevice (thanks to Stefan Huelswitt). - Fixed switching audio tracks in 'Transfer Mode' on the primary DVB device (thanks to Steffen Barszus and Stefan Huelswitt for reporting this one and helping to fix it). - Fixed channel switching in case of an active 'Transfer Mode' on the primary device ('Transfer Mode' is now launched with priority '-1'). - Fixed a ternary expression in dvbspu.c. - Fixed handling 'Transfer Mode' on single device systems when recording an encrypted channel (thanks to Stefan Huelswitt). - Fixed blocking replaying in case an encrypted channel is being recorded on the primary device. - Now the name of the remote control is displayed when learning the keys. - Fixed learning remote control keys in case there is more than one remote control (thanks to Oliver Endriss for reporting this one). - Implemented additional dedicated keys for "Play", "Pause", "Stop", "Record", "FastFwd", "FastRew", "Channel+" and "Channel-". If your remote control supports any of these keys you can delete your 'remote.conf' file and restart VDR to go through the key learning procedure again in order to assign these new keys. See MANUAL for more information. Authors of player plugins should update their ProcessKey() functions so that the new player keys have the same functionality as the "Up", "Down", "Left", "Right" and "Blue" keys, respectively. Note that the existing functionality of these keys should by all means be retained, since VDR (and any plugins) shall be fully usable with just the basic set of keys. These new keys are only for additional comfort in case the remote control in use supports them. - Implemented new keys to directly access the VDR main menu functions "Schedule", "Channels", "Timers", "Recordings", "Setup" and "Commands". If your remote control provides keys you want to assign these functions to, you can delete your 'remote.cof' file and restart VDR to go through the key learning procedure again in order to assign these new keys. See MANUAL for more information. - The new configuration file 'keymacros.conf' can be used to assign macros to the color buttons in normal viewing mode, as well as to up to 9 user defined keys. See MANUAL and man vdr(5) for more information. The default 'keymacros.conf' implements the functionality of the "color button patch". - Fixed a crash when learning the keys of several remote controls and pressing buttons of those that have already been learned (thanks to Oliver Endriss for reporting this one).
2002-10-13Version 1.1.13vdr-1.1.13Klaus Schmidinger
- Added cDevice::DeviceNumber() to get the number of a device, not counting any gaps that might be in the index count. - Fixed fetching the current/next information to handle cases where the duration of an event is set wrongly and would last beyond the start time of the next event. - Adapted type names to the new HEAD version of the driver (which the previous NEWSTRUCT branch has been merged into). Note that to use this driver version you still need to add NEWSTRUCT=1 to the make call when building VDR. You need a HEAD version of the LinuxDVB driver dated 2002-10-11 or later to compile VDR with NEWSTRUCT=1. - Fixed radio channels in channels.conf.cable (thanks to Robert Schiele and Uwe Scheffler). - Fixed switching the video format in the Setup/DVB menu (thanks to Uwe Scheffler for reporting this one). - Reactivated full handling of second audio PID (even in 'Transfer Mode'). - Fixed a crash when closing down with remote control plugins (thanks to Oliver Endriss helping to debug this one). - Commands in the file 'commands.conf' can now have a '?' at the end of their title, which will result in a confirmation prompt before executing the command. - Changed a few leftover 'new char[...]' to MALLOC(char, ...). - If a command executed from the "Commands" menu doesn't return any output, the OSD will now be closed automatically. - The SVDRP command PUTE now triggers an immediate write of the 'epg.data' file (suggested by Gerhard Steiner). - The new configuration file 'reccmds.conf' can be used to define commands that shall be executed from the "Recordings" menu; see MANUAL and 'man vdr(5)' for details (suggested by Gerhard Steiner).
2002-10-06Version 1.1.12vdr-1.1.12Klaus Schmidinger
- Fixed a missing Flush() call in the remote control learning procedure (thanks to Oliver Endriss). - Modified channel handling to cover all parameters necessary for DVB-C and DVB-T (see man vdr(5) for the meaning of the additional parameters stored in the field previously named 'polarisation'). Thanks to Uwe Scheffler and Andy Carter for testing. If you have a system with different kinds of DVB cards, like DVB-T and DVB-C, for instance, there is no more need to distinguish the channels through the 'Ca' parameter in order to assign them to the various DVB cards. This is now taken care of by the "source" parameter. So a channel marked as "terrestrial", for example, will only be received on DVB-T cards. Note that the cChannel class has been moved into a separate file (channels.[ch]), and that all data members have been made private and are now only accessible through member functions. You may have to change any plugin code that accesses cChannel data accordingly. - The new configuration file 'sources.conf' contains the various signal sources (satellites, cable and terrestrial) which are used in 'channels.conf' and 'diseqc.conf' (thanks to Reinhard Walter Buchner for adding some satellites to 'sources.conf' and Oliver Endriss and Lauri Tischler for testing and debugging). - The 'diseqc' parameter in the channel definitions has been redefined to hold the "source" of the given channel (which can be either a satellite, cable or terrestrial). For compatibility with channels.conf files from older versions, numeric values in this parameter will be tolerated, but they have no meaning. If you want to use DiSEqC you will need to replace these old values with the proper source identifiers defined in the new configuration file 'sources.conf'. See how this is done in the 'channels.conf' file that comes with the VDR package. - The new configuration file 'diseqc.conf' can be used to set up the individual diseqc configuration (see man vdr(5) for a description of the file format). - The "Edit channel" menu has a new entry "Source:" in which the source of this channel can be selected (either a satellite, cable or terrestrial). The set of parameters at the end of this menu will change according to the type of source. - The "Use DiSEqC" parameter in the "Setup/LNB" menu has been moved to the beginning of the list and disables the rest of the parameters when set to "yes", since these are now only meaningful if DiSEqC is _not_ used. - Removed some unnecessary #includes from eit.c and changed cMenuRecordings::Del() to cMenuRecordings::Delete() to avoid warnings in gcc-3.2 (thanks to Andreas Schultz for pointing this out). - Improved skipping channels that are (currently) not available (thanks to Stefan Huelswitt). - Updated channels.conf.terr and channels.conf.cable (thanks to Uwe Scheffler). - Fixed a bug when pressing the "Blue" button in the main menu without having displayed it (thanks to Oliver Endriss for reporting this one).
2002-09-29Version 1.1.11vdr-1.1.11Klaus Schmidinger
- Fixed an incomplete initialization of the filter parameters in eit.c (thanks to Jeremy Hall). - Fixed the 'newplugin' script for use with the NEWSTRUCT driver (thanks to Andreas Schultz for reporting this one). If you have already created a plugin directory and Makefile with 'newplugin', please apply the following patch to it: ------------------------------------------------------- --- Makefile 2002/06/10 16:24:06 1.4 +++ Makefile 2002/09/17 15:36:36 1.5 @@ -15,7 +15,12 @@ ### The directory environment: +ifdef NEWSTRUCT +DVBDIR = ../../../../DVB/include +DEFINES += -DNEWSTRUCT +else DVBDIR = ../../../../DVB/ost/include +endif VDRDIR = ../../.. VDRINC = $(VDRDIR)/include LIBDIR = ../../lib @@ -34,7 +39,7 @@ INCLUDES = -I$(VDRINC) -I$(DVBDIR) -DEFINES = -DPLUGIN_NAME_I18N='"$(PLUGIN)"' +DEFINES += -DPLUGIN_NAME_I18N='"$(PLUGIN)"' ### The object files (add further files here): ------------------------------------------------------- This is the diff for the 'setup' example that comes with VDR, so your line numbers may be different. - Added a missing 'public' keyword in device.h (thanks to Martin Hammerschmid). - Fixed a race condition when starting 'Transfer Mode'. - Rearranged the remote control key handling to allow plugins to implement additional types of remote controls (see PLUGINS.html, section "Remote Control"). The previously used files 'keys.conf' and 'keys-pc.conf' have been replaced by the file 'remote.conf', which holds the key definitions of all remote controls. - The LIRC remote control keys are now handled just like the keyboard and RCU keys. This means that you can use the lircd.conf file as is for your remote control, without the need of editing it to make the key names the same as used in VDR. When first starting VDR it will go into the "Learning keys" mode and ask you to press the various keys. The resulting key assignment will be stored in the file 'remote.conf'. Since I have no way of testing the LIRC support, I hope I didn't break it in the process... - While learning the remote control keys it is now possible to press the 'Menu' key to skip the definition of keys that are not available on your particular RC unit. - Fixed handling DVD subtitles in the SPU decoder (thanks to Andreas Schultz). - Avoiding restarts due to 'panic level' when switching channels on the primary device during EPG scan.
2002-09-15Version 1.1.10vdr-1.1.10Klaus Schmidinger
- Removed a superfluous error message from cLockFile::Unlock() (reported by Helmut Auer). - Fixed starting a recording of the current channel with only one DVB card (thanks to Stefan Huelswitt for his help). - A previous 'Transfer Mode' is now automatically re-started after a replay stops. - Only calling cStatus::MsgChannelSwitch() if a channel is actually going to be switched or has actually been switched successfully (thanks to Stefan Huelswitt). - The EPG now drops events from "other" streams that have a duration of 86400 seconds or more (this avoids bogus entries like "PROGRAMMES ALLEMANDS"). - Fixed opening /dev/video in cDvbDevice::GrabImage() in case of NEWSTRUCT driver (thanks to Andreas Schultz). - Added a missing StripAudioPackets() to cDvbPlayer::Action() (thanks to Stefan Huelswitt). - Added an EPG bugfix for the latest VOX EPG data format.
2002-09-08Version 1.1.9vdr-1.1.9Klaus Schmidinger
- Fixed the 'newplugin' script to make it name the target for creating the distribution package 'dist', as stated in the PLUGINS.html documentation. If you have already created a plugin source directory and Makefile you may want to check it and replace the 'package' target with 'dist' if necessary. - Changed device handling for being able to do simultaneous recording and replay on the same device (Time Shifting). In order for this to work you need to use a driver with a firmware version that has this feature implemented. - cDevice::ProvidesCa() is no longer virtual. The new function cDevice::ProvidesChannel() is now used to determine whether a device can receive a given channel, and by default this function returns false. So a device that is a pure replaying device doesn't need to do anything here. - Increased the recorder buffer size to 5MB in order to be able to better handle multiple recordings. - Implemented cTSBuffer for better handling TS packet buffering in derived cDevice classes. - Changed the interface if cDevice::GetTSPacket() to avoid unnecessary copying of data. - Removed cDevice::Channel(), since this makes no more sense with devices receiving multiple channels. - Switching through channels with the 'Up' and 'Down' keys now skips channels that are currently not available (for instance because all devices are recording and these channels are on different transponders). - Implemented an SPU decoder (thanks to Andreas Schultz). - Fixed a crash when entering an integer value outside the limits (thanks to Stefan Huelswitt for reporting this one). - Added play mode pmAudioOnlyBlack (thanks to Stefan Huelswitt).
2002-08-25Version 1.1.8vdr-1.1.8Klaus Schmidinger
- Fixed replaying the last few seconds of a recording. - Added some missing #includes to files in libdtv for gcc 3.2 (thanks to Jürgen Zimmermann). - Added cDevice::NewOsd() to allow a derived cDevice class to implement its own OSD capabilities (thanks to Andreas Schultz). - Added cPalette::AllColors() for plugins that need to get the color entries of a cPalette (see osdbase.h). - The new SVDRP command CLRE can be used to clear the entire EPG data (suggested by Matthias Schniedermeyer). - Fixed handling one-shot timers that were already recording and had their start time changed into the future (thanks to Matthias Schniedermeyer for reporting this one).
2002-08-16Version 1.1.7vdr-1.1.7Klaus Schmidinger
- Adapted VDR to the NEWSTRUCT driver. To use the new driver, compile VDR with 'make NEWSTRUCT=1' (thanks to Holger Wächtler for some valuable advice). By default it currently still uses the old driver. - Added some missing #includes (thanks to Martin Hammerschmid). - Changed the log error message "can't record MPEG1!" to "error in data stream!", since the mentioning of MPEG1 has irritated many people. - Consistently using malloc/free and new/delete (thanks to Andreas Schultz). - Temporarily made cDevice::ProvidesCa() virtual (Andreas Schultz needs this in his DXR3 plugin). - cDevice no longer exposes a file handle to cPlayer. A derived cPlayer class can now call DevicePoll() to see whether the replay device is ready for further data. A derived cDevice class must implement Poll() and shall check if any of its file handles is ready for data. - Implemented several replay modes to allow players that play only audio (thanks to Stefan Huelswitt). - Improved cCondVar::Wait() and implemented cCondVar::TimedWait() (thanks to Stefan Huelswitt). - VDR no longer gives up if there is no DVB device. It continues to work if there is at least one device, either a DVB device found by the core VDR code itself, or a device implemented by a plugin.