| Age | Commit message (Collapse) | Author |
|---|
|
- Fixed the PremiereContentTransmissionDescriptor in 'libsi' (thanks to Stefan
Huelswitt).
- Removed all the compatibility '#if APIVERSNUM...' stuff and instead increased
the API version number - plugins will have to be recompiled.
- Removed the call to pthread_setschedparam(childTid, SCHED_RR, 0) in thread.c,
because it caused a compiler warning with post-2.4 glibc (reported by Ville Skyttä).
Since the third parameter has to be non-null to have any effect, the call was
presumably a NOP, anyway.
- Fixed the 'clean-plugins' target in the Makefile to also remove additional
plugin libraries (thanks to Wayne Keer).
- Applied the fixes to moving and deleting channels from version 1.4.0-2 to the
SVDRP commands MOVC and DELC as well.
- Fixed handling the display of the '*' indicator in the "What's on now/next?"
menu, so that events that haven't been "seen" in the data stream within 30
seconds won't be shown as "running".
- Fixed handling tabbed item display in 'skincurses'.
- Increased the column spacing in the "Recordings" menu (was too small for the
'skincurses' plugin).
- When the 'skincurses' plugin is loaded, it automatically sets the 'curses'
skin as the current one. This doesn't modify the Setup.OSDSkin parameter, so
that after using 'skincurses' (for instance for debugging) the previously
selected skin will be used again.
- Added some log messages when setting the current skin.
- Only making a second attempt to set the current skin at startup if the first
attempt has failed.
- Now switching to non-VPS timers' channels 60 seconds before the timer starts
(if a free device is available), to allow for the updating of EPG data and CA
descriptors before the actual recording starts.
|
|
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed a crash when setting the time transponder in the Setup menu, caused by the
new 'noneString' in cMenuEditChanItem (reported by Thomas Günther).
- Added NULL checks to some strdup() calls in menuitems.c (suggested by Darren
Salt).
- Removed the unnecessary 'value' member from cMenuEditItem.
- Fixed the initial setting of the time transponder setup parameter (reported
by Thomas Günther).
- Fixed unnecessary Set() calls in cMenuEditIntItem::ProcessKey().
- Allowing a tolerance for symbol rate values that are off by one (thanks to
Richard Lithvall).
- Added VBITeletextDescriptorTag, TeletextDescriptorTag, LocalTimeOffsetDescriptorTag
and PremiereContentTransmissionDescriptor to 'libsi' (thanks to Marco Schlüßler).
- Using geteuid() to check whether VDR is running as user 'root' (suggested by
Tobias Grimm).
- Added a missing "Key$" in skincurses.c (reported by Darren Salt).
- Reintroduced the log message "deleting plugin: ..." when shutting down VDR (upon
request by Ville Skyttä, as in the initial patch from Christoph Haubrich).
- Fixed the vdr.1 man page (a single DVB card can record and do live tv).
- The preferred audio language is now automatically selected when starting replay.
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- The new function cPlugin::Active() can be used by a plugin to indicate that it
is still busy and the system should not shut down or restart (based on a patch
from Sascha Volkenandt). See PLUGINS.html for details.
- Fixed setting the 'Delta' parameter when calling the shutdown script with
no active timer (reported by Helge Lenz).
- In order to make sure that plugins are compiled with the same DVB driver header
files as VDR itself, the definition of DVBDIR has been removed from the VDR
Makefile. If you are using a driver version that has its header files at a location
other than /usr/include/linux/dvb, you can define DVBDIR in the Make.config
file (see also INSTALL). Note that if you already have a Make.config file of your
own, you should add the lines
ifdef DVBDIR
INCLUDES += -I$(DVBDIR)/include
endif
to its end, as in the new Make.config.template.
Any reference to DVBDIR should be removed from all plugins' Makefiles, like this:
------------------------------------------------------------
--- PLUGINS/src/hello/Makefile 2005/11/11 13:20:14 1.10
+++ PLUGINS/src/hello/Makefile 2006/04/15 11:58:46 1.11
@@ -20,7 +20,6 @@
### The directory environment:
-DVBDIR = ../../../../DVB
VDRDIR = ../../..
LIBDIR = ../../lib
TMPDIR = /tmp
@@ -40,7 +39,7 @@
### Includes and Defines (add further entries here):
-INCLUDES += -I$(VDRDIR)/include -I$(DVBDIR)/include
+INCLUDES += -I$(VDRDIR)/include
DEFINES += -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
------------------------------------------------------------
Thanks to Marco Schlüßler for pointing out this problem.
- Implemented kNext and kPrev keys (based on a patch from Peter Juszack).
See MANUAL for details.
- Implemented kChanPrev (from a patch from Darren Salt).
- The "Update channels" parameter in the "Setup/DVB" menu has been extended to
allow updating only the PIDs (see MANUAL for details). When updating to this
version of VDR, please verify that the setting is as you want it to be, because
the values have been shifted.
- The new APIVERSION (see config.h) now allows existing compiled plugins to be
used with newer versions of VDR, as long as there have been no changes to the
VDR header files since the last APIVERSION. Existing plugins' Makefiles should
have all references to VDRVERSION changed to APIVERSION, like this:
------------------------------------------------------------
--- PLUGINS/src/hello/Makefile 2006/04/15 11:58:46 1.11
+++ PLUGINS/src/hello/Makefile 2006/04/16 09:03:50 1.12
@@ -28,9 +28,9 @@
-include $(VDRDIR)/Make.config
-### The version number of VDR (taken from VDR's "config.h"):
+### The version number of VDR's plugin API (taken from VDR's "config.h"):
-VDRVERSION = $(shell grep 'define VDRVERSION ' $(VDRDIR)/config.h | awk '{ print $$3 }' | sed -e 's/"//g')
+APIVERSION = $(shell sed -ne '/define APIVERSION/s/^.*"\(.*\)".*$$/\1/p' $(VDRDIR)/config.h)
### The name of the distribution archive:
@@ -67,7 +67,7 @@
libvdr-$(PLUGIN).so: $(OBJS)
$(CXX) $(CXXFLAGS) -shared $(OBJS) -o $@
- @cp $@ $(LIBDIR)/$@.$(VDRVERSION)
+ @cp $@ $(LIBDIR)/$@.$(APIVERSION)
dist: clean
@-rm -rf $(TMPDIR)/$(ARCHIVE)
------------------------------------------------------------
- If a timer is newly created from within the "Schedule" menu, and its event is
already running or has its start time within the next two minutes, it now goes
directly into the "Edit timer" menu in order to allow the user to make further
changes to timer parameters before the actual recording starts (inspired by
Christian Wieninger's "epgsearch" plugin).
- Added format check to syslog_with_tid().
- Updated the INSTALL file's section about non-VDR files in the video directory
(since version 1.3.38 disk access is done in a separate thread, so the watchdog
timer won't hit).
- Changed the behaviour of the "Use small font" setup option to *always* use the small
font if set to '2' - even if it would have been a fixed font (suggested by Ronny
Kornexl).
- No longer using characters 0x01 and 0x02 for mapping single quote and slash in
recording names (thanks to Patrick Fischer for reporting that this was a problem
with XML). The single quote is not mapped at all, and the slash is interchanged
with the tilde. Existing recordings will be handled like before, so there is
no need to actually rename them.
- The cRemote::CallPlugin() function now has a boolean return value that tells
the caller whether initiating the plugin call was successful (suggested by
Reinhard Nissl). If it returns false, another plugin call is currently pending
and the caller should try again later. This also means that the SVDRP command
PLUG can now return an error code is the call fails.
- The new function cPlugin::MainThreadHook() can be used by plugins to perform
actions in the context of the main program thread. Use this function with great
care and only of you absolutely have to! See also PLUGINS.html.
|
|
- Added compiler options "-fPIC -g" to all plugins (thanks to Rolf Ahrenberg).
- Fixed initializing the day index when editing the weekday parameter of a
repeating timer (thanks to Marco Schlüßler).
- No longer removing superfluous hyphens in EPG data - would become too
language dependent to handle all kinds of exceptions.
- Modified switching to Dolby Digital audio in live mode, if the driver
and firmware can handle live DD without the need of a Transfer Mode (thanks
to Werner Fink). Live DD mode requires a full featured DVB card and a
LinuxDVB driver with firmware version 0x2622 or higher. Older versions will
use Transfer Mode just like before.
- Implemented handling of the "CA PMT Reply" for CAMs (thanks to Marco
Schlüßler for figuring out some obscure length bytes in the CA PMT Reply
data of AlphaCrypt CAMs).
- Some preparations for being able to record several encrypted channels from
the same transponder at the same time (or record and view different encrypted
channels), provided the CAM in use can handle this. This is work in progress
and isn't actively used, yet.
- Fixed SetProgress() in the 'skincurses' plugin in case Total is 0 (reported
by Stefan Huelswitt).
- Added a copy constructor to cString and fixed its assignment operator
(thanks to Holger Brunn).
- The new function Skins.QueueMessage() can be called from a background thread
to queue a message for display. See VDR/skins.h for details.
- The SVDRP command MESG uses the new message queueing facility, so MESG
commands may now be executed at any time, and the message will be displayed
(no more "pending message").
|
|
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Some cable providers don't mark short channel names according to the standard,
but rather go their own way and use "name>short name". VDR now splits at this
character for cable channels (thanks to Gerhard Steiner for reporting this one).
- Added a check for Setup.DiSEqC in cDvbDevice::ProvidesTransponder(), otherwise
the EPG scan didn't work on systems that don't use DiSEqC (thanks to Michael
Reinelt for reporting this one).
- Made the Makefile patch friendlier (thanks to Ludwig Nussel).
- Made cOsd::isOpen an integer counter to avoid problems with messages when a
cOsdObject uses the raw OSD (thanks to Andreas Regel for reporting this one).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- The file 'summary.vdr' has been replaced with 'info.vdr' and now contains the
information about a recording, in the same format as the events are stored in
'epg.data' (see man vdr(5) for details). Existing summary files can be converted
to the new format by running the Perl script 'summary2info.pl', as in
summary2info.pl /video
(the parameter given has to be the video directory). If there is no 'info.vdr'
file for a recording, an attempt is made to read a 'summary.vdr'.
- The "Summary" button in the "Recordings" menu has been renamed to "Info", and
the page it brings up now shows the recording's information, much like the EPG
event page. Therefore it now no longer uses the skin's SetText() function, but
rather the SetRecording() function. Skin plugins may need to adjust that function
accordingly (see skinsttng.c, for instance).
- The SVDRP command LSTR now lists the recording information in the same tagged
format as the LSTE command lists the EPG data.
- The audio track menu now contains track descriptions when replaying (provided
such descriptions were available in the EPG data when the recording was made,
and are stored in the info.vdr file).
- Avoiding extra blanks at the end of names of instant recordings.
- Removed converting byte order on big endian systems from cDvbOsd::Flush(),
which, according to Johannes Stezenbach and Paavo Hartikainen, is wrong.
- Added cPlayer::DeviceSetVideoDisplayFormat() (thanks to Marco Schlüßler).
- No longer saving the setup in case of a fatal error, to keep the volume level
from being set to a wrong value (thanks to Marco Schlüßler).
- Fixed a possible hangup when ending a replay session while cIndexFile::CatchUp()
is waiting (thanks to Marco Schlüßler).
- The SVDRP command DELR no longer deletes recordings that are currently being
written to by a timer (thanks to Sascha Volkenandt for pointing out this one).
- Pressing the "Play" key in live viewing mode now resumes a previous replay
session (thanks to Mirko Dölle).
- Now dropping EPG events that have a zero start time or duration (thanks to
Oliver Endriss).
- No longer stopping Transfer Mode or replay immediately when the Power button
is pressed (thanks to Rolf Ahrenberg).
- Moved the NPTL and UTF-8 checks after the version and help output (thanks to
Andreas Kool for pointing out that 'vdr --version' failed on an UTF-8 system).
- Made tChannelID::operator==() inline for better performance (thanks to Georg
Acher).
- Introduced cListBase::count for better performance (thanks to Georg Acher).
- cEvent no longer stores the channelID directly, but rather has a pointer to
the schedule it is in.
- Now using hash tables to speed up cSchedule::GetEvent() (partially based on
a patch from Georg Acher).
- Avoiding unnecessary calls to getLength() in libsi/si.c, and avoiding the
'& 0xff' in CRC32::crc32() of libsi/util.c (thanks to Georg Acher).
- Speeded up deleting duplicate channels.
- Fixed listing recordings with empty episode names in the LSTR command (thanks
to Stefan Huelswitt for pointing this out).
- Added cThread::SetPriority() and using it in cSectionHandler::Action() to
reduce the priority of the section handler threads (as suggested by Georg Acher).
|
|
- Removed an unused variable from cTimer::GetWDayFromMDay() (thanks to Wayne Keer
for reporting this one).
- Some more changes to the 'childTid' handling in cThread (based on suggestions by
Stefan Huelswitt).
- Fixed the spelling of 'canceling' (thanks to Wayne Keer for reporting this one).
- Re-introduced a sleep to cDvbPlayer::Action() to avoid high CPU load in still
picture mode (thanks to Reinhard Nissl for reporting this one).
- Fixed a possible race condition in generating the DVB device names (thanks to
Rainer Zocholl for reporting this one).
- Changed the way PES packets are played to allow replay of AC3 sound over the
full featured DVB cards (partially based on a patch from Werner Fink).
+ The new function cDevice::PlayPes() is now called with the complete PES data
stream and calls PlayVideo() and PlayAudio() as necessary.
+ cDevice::PlayVideo() is now only called with actual video PES packets.
+ cDevice::PlayAudio() is now called with the actual audio PES packets, which
can be either "normal" audio or AC3 data. You need at least firmware version
0x261d to replay AC3 sound over a full featured DVB card. This function now
has an 'int' return value.
+ PlayAudio() of derived cDevice classes shall no longer call the base class
function. It shall just play the given data as audio.
+ cPlayer::PlayVideo() and cPlayer::PlayAudio() are now obsolete and have been
replaced with cPlayer::PlayPes().
+ All StripAudioPackets() functions are now obsolete. The functionality has been
moved into cDevice::PlayPes(), where only the video and audio packets that are
actually required will be processed.
+ All audio track handling is now done by cDevice; cTransfer and cDvbPlayer no
longer care about audio tracks. cPlayer, however, still has the virtual hooks
for audio track handling in order to allow plugins to implement players that
have their own idea about this.
+ cChannel::[AD]pid[12]() have been replaced with cChannel::[AD]pid(int i) to
allow access to all available PIDs.
- Escaped the '-' and 'ö' characters in the man pages (thanks to Darren Salt for
pointing this out).
- Completed the Italian OSD texts (thanks to Sean Carlos).
- Fixed setting 'synced' in cRemux when recording radio channels (thanks to
Laurence Abbott).
- Removed the LOCK_THREAD from the LIRC thread (thanks to Ludwig Nussel).
- Fixed genfontfile.c (sometimes the character width was wrong, and the codes were
shifted one too far to the left).
- Fixed the character width and shifted the codes one to the right in all font
files.
- Renamed font???.c to font???-iso8859-1.c for symmetry.
- Switched the character set to iso8859-15 for English, German and Finnish (thanks
to Andreas Brugger for reporting the missing Euro sign in iso8859-1).
- Added 'channels.conf.terr' entries for Lübeck (thanks to Stefan Hußfeldt).
- Fixed a race condition in starting a thread (thanks to Reinhard Nissl for
reporting this one).
- Replaced non-threadsafe library functions with their threadsafe versions (thanks
to Rainer Zocholl for pointing this out).
- Other non-threadsafe functions have been replaced by threadsafe classes that hide
the actual buffering. In particular these are:
readdir() -> cReadDir
readline() -> cReadLine
- Several formerly non-threadsafe functions now have a return type of cString:
cChannel::ToText()
tChannelID::ToString()
cEvent::GetDateString()
cEvent::GetTimeString()
cEvent::GetEndTimeString()
cEvent::GetVpsString()
cMark::ToText()
cTimer::ToText()
cSource::ToString()
cTimer::PrintDay()
cTimer::PrintFirstDay()
PrefixVideoFileName()
IndexToHMSF()
ChannelString()
strescape()
AddDirectory()
itoa()
WeekDayName()
DayDateTime()
When using these functions in a 'const char *' context there is nothing special
to consider, except that you can no longer have a pointer to the return value,
as in
const char *date = DayDateTime();
Although this will compile without error message, the resulting 'date' will not
be valid after this line. Use this instead:
cString date = DayDateTime();
In a 'const void *' context (as in printf() etc.) the result needs to be
dereferenced with a '*', as in
printf("%s", *DayDateTime());
to make it a 'const char *'.
- Removed delay_ms(), using cCondWait::SleepMs() instead.
- Replaced time_ms() with a threadsafe and non-overflowing cTimeMs (thanks to Rainer
Zocholl for pointing out this problem).
- Added cDevice::mutexReceiver to avoid a race condition when attaching/detaching
receivers from different threads.
- The new remote control button "Audio" can be used to switch between different
audio tracks. The "Green" button in the "Main" menu has been changed from "Language"
to "Audio", since it now also controls switching between normal and Dolby Digital
audio tracks (see MANUAL for details).
- The description of the audio tracks is now taken from the "component descriptors"
that are broadcast in the EPG data. However (as no big surprise), not all channels
actually provide useful data here, so there are now some additional EPG bugfixes,
which can be activated by setting the "EPG bugfix level" to 3.
- The format of the 'epg.data' files has been extended by the new tag 'X', which
contains the stream components of an event (see man vdr(5) for details).
- The cStatus class now has the new member function SetAudioTrack(), which can be
used to get notified when the audio track has been switched, and the new member
function SetAudioChannel() which is called when the audio channel is changed.
- Skins need to implement the new cSkinDisplayTrack class to display the audio
track menu.
- The ST:TNG skin now displays the current audio track description (if any) at the
botton left side.
- The new setup option "DVB/Audio languages" can be used to control which audio
language shall be selected in case a channel broadcasts in different languages
(see MANUAL for details).
- The "Left" and "Right" keys in the "Audio" menu can be used to switch between
the left and right stereo channels in case there are different audio tracks
in these channels (see MANUAL for details).
- Fixed a possible race condition in cDevice::Action() (thanks to Mattias Grönlund).
- Fixed the default quality value when grabbing a JPEG image (thanks to Patrick
Gleichmann).
- Fixed deleting a menu item in case the next item is not selectable (thanks to
Dino Ravnic).
- Implemented displaying mandatory subtitles in the SPU decoder (thanks to Marco
Schlüßler).
- The setup option "Recording/Record Dolby Digital" has been renamed and moved to
"DVB/Use Dolby Digital". It now controls whether Dolby Digital is recorded and
whether an available DD audio track will appear in the "Audio" menu.
- Added support for circular polarization (thanks to Jonan Santiago).
- Thanks to Werner Fink, Reinhard Nissl, Sascha Volkenandt and Bjørnar Nilsen for
their support in testing and fine tuning this version.
|
|
- Fixed some default parameters in 'skincurses'.
- Fixed cBitmap::DrawPixel(), which messed with other bitmaps' palettes in case
the pixel coordinates were outside this bitmap (thanks to Sascha Volkenandt for
reporting this one).
- The cBitmap::DrawText() function now doesn't set any background pixels if the
given background color is clrTransparent. This allows drawing "transparent"
texts (suggested by Sascha Volkenandt).
- The cBitmap::SetXpm() function now ignores unused "none" color entries, which
some broken graphics tools write into XPM files (suggested by Sascha Volkenandt).
- No longer setting lnb voltage if the frontend is not DVB-S (thanks to Marco
Schlüßler).
- Fixed displaying the current channel when switching via the SVDRP command CHAN
(thanks to Jürgen Schmitz for reporting this one).
- Fixed missing audio after replaying a DVD (thanks to Marco Schlüßler).
- Added a note about the default assignment of the color keys to MANUAL.
- Added a note about NPTL ("Native Posix Thread Library") to the INSTALL file
(apparently the "fix" in version 1.3.0 didn't really fix this).
- Modified 'libsi' to require callers to state the buffer sizes when getting
strings in order to avoid buffer overflows (thanks to Philip Lawatsch for
debugging a buffer overflow in eit.c).
|
|
- Completed Croatian language texts (thanks to Drazen Dupor).
- New iso8859-2 font to fix the problem with program freezes (thanks to Drazen Dupor).
- Implemented a default cRemote::Initialize() that waits 10 seconds for a keypress
in order to prevent a "hangup" in case, e.g., the LIRC driver is not loaded (thanks
to Helmut Auer).
- Updated 'channels.conf.terr' for Hannover (thanks to Peter Waechtler).
- cBitmap::DrawBitmap() now also resets the palette if the entire bitmap area is
covered (suggested by Sascha Volkenandt).
- Fixed setting the title in the replay display of the "Classic VDR" skin in case
a shorter title is set after a longer one (thanks to Stefan Huelswitt for
reporting this one).
- Now using more separate areas in the "ST:TNG Panels" skin to allow a theme to
use more independent clrMenu* colors.
- Fixed removing the "scanning recordings..." message in case the video directory
is empty (thanks to Andreas Regel for reporting this one).
- Added SetMessage() functions to the Replay and Channel skin functions. Plugins
that implement skins will need to implement these functions. This fixes a missing
"Editing process finished" message (thanks to Oliver Endriss for reporting this
one).
- Fixed the height of the channel display in the "Classic VDR" skin.
- Fixed handling descriptor loops in 'libsi', which had sometimes caused invalid
CA ids to be added to the channel definitions (thanks to Wayne Keer for reporting
this one, and Marcel Wiesweg for fixing it).
- Fixed handling colors in cDvbSpuPalette::yuv2rgb() (thanks to Marco Schlüßler).
- Made some functions of cFont virtual to allow implementing dummy fonts for the
'curses' skin.
- The new plugin 'skincurses' re-implements the functionality that was previously
available by compiling VDR with DEBUG_OSD. Some things may not yet work as they
should, but it's a starting point.
|
