| Age | Commit message (Collapse) | Author |
|---|
|
- Fixed setting the OSD size in the 'Confirm' interface call (thanks to
Deti Fliegl).
- Removed the 'read incomplete section...' error message in the EIT processor.
- Fixed channel data for "DW TV" (thanks to Axel Gruber).
- Added DPID to "PREMIERE MOVIE 1" in channels.conf.cable (thanks to Stephan
Schreiber).
- Prepared the OSD functions for multiple overlapping windows.
- Removed the check to see whether the system time is running linearly.
- Improved performance of SVDRP command entry.
- Removed EPGBugfixLevel '3' - after more than a year Pro-7 finally managed to
broadcast the correct timestamps for EPG events between 0:00 and 6:00!
- Fixed failing watchdog timer if program hangs in OSD activities (thanks to
Carsten Koch).
- No longer requiring 'libncurses' if compiling without DEBUG_OSD=1 and
REMOTE=KBD (thanks to Lauri Pesonen).
- The "Recordings" menu now displays a hierarchical structure if there are
subdirectories for the recordings. This can be controlled through the
"RecordingDirs" parameter in the "Setup" menu.
See "MANUAL/Replaying a Recording" for details.
- Improved speed of setting the Help button texts.
- Fixed handling file names that contain single quotes (') or dollar signs ($)
in the call to the shutdown command (option '-s') and the recording command
(option '-r').
- Improved error handling in the editing process; the resulting file will be
deleted if an error occured.
- A message is now prompted at the end of the editing process, indicating
whether the process succeeded or failed.
- Fixed setting the LastActivity timestamp after a shutdown prompt (thanks to
Sergei Haller).
- A message is now prompted if free disk space becomes low during recording.
- The editing process now calls AssertFreeDiskSpace() to remove deleted
recordings if the disk becomes full.
- The "Main" menu now displays in its title the used disk space (in percent)
and the estimated free disk space (in hh:mm), assuming a data rate of 30 MB
per minute.
- Activating the "Recordings" menu now displays "scanning recordings..." to
give the user some feedback in case this takes longer.
- Status messages are now displayed centered.
- Removed the 'Tools' subdirectory from the VDR archive. All contributed tools
can now be found at ftp://ftp.cadsoft.de/pub/people/kls/vdr/Tools.
|
|
- Added Norwegian language texts (thanks to Jørgen Tvedt).
- Increased the usleep value in cDvbOsd::Cmd() to 5000 in order to work on
systems with the KURT/utime-patch (thanks to Guido Fiala).
- Changed the check whether the driver is loaded in runvdr to check for the
'dvb' module (the last one loaded).
- Fixed repeat function with LIRC (thanks to Stefan Huelswitt).
- Increased the upper limit for the symbol rate to 30000 (thanks to Ulrich
Röder).
- Made the position of the channel display configurable (thanks to Stefan
Huelswitt).
- Made the width and height of the OSD configurable (thanks to Stefan Huelswitt).
- DiSEqC support can now be generally enabled/disabled in the Setup menu. This
may be necessary if your multiswitch gets irritated by the default DiSEqC
codes '0' (thanks to Markus Lang).
- Fixed replaying in case there is no index file.
- Fixed jumping to an editing mark when replay has been paused.
- Avoiding unnecessary code execution in the replay progress display (thanks
to Guido Fiala).
- When entering time values the digits that still have to be entered are now
shown as '-' (as in "1-:--").
- When setting an editing mark while the progress display is not active, the
display will now be turned on for a short while to indicate the successful
setting of the mark.
- Updated 'channels.conf' for Premiere World (thanks to Helmut Schächner).
Check your timers if you use this channels.conf file, since the sequence of
several PW channels has been changed.
- Changed the color of "Info" messages to "black on green" and that of the
confirmation messages (like "Delete...") to "black on yellow".
- Fixed display with DEBUG_OSD (it still crashes sometimes, esp. when replaying,
but I can't seem to find what causes this... any ideas anybody?).
- Avoiding audio/video distortions in 'Transfer Mode' by no longer actually
tuning the primary interface (which can't receive this channel, anyway).
Apparently the driver gets irritated when the channel is switched and a
replay session is started immediately after that.
- Increased timeout until reporting "video data stream broken" when recording.
- Explicitly switching back to the previously active channel after ending a
replay session (to have it shown correctly in case it was in 'Transfer Mode').
|
|
- Fixed 'Transfer Mode' in cases where a non-primary interface was switched to
a channel that only the primary interface can receive (which could happen in
the EPG scanner).
- The EPG scanner now starts with the first channel (it used to start with the
second channel).
- Reacitvated setting the PNR.
- Adapted the frame scanning to the new muxing of the driver.
- The new compile time option REMOTE=NONE can be used to compile VDR without
any remote control support (for applications where it shall be controlled
exclusively via SVDRP).
- The new command line option -D can be used to define which DVB interfaces
a certain instance of VDR shall use.
- The "Left" and "Right" keys are now used to page up and down in lists (thanks
to Martin Hammerschmid). Since the "Timers" menu already uses these keys to
(de)activate timers, this functionality is not available there.
- The "Main" and "Commands" menu now support "hotkeys", which means that if the
first non-blank character of a menu item is a digit in the range 1..9, that
item can be selected by pressing the respective numeric key on the remote
control.
- The channel data in 'channels.conf' now contains the teletext PID (thanks to
Dave Chapman). Existing files will be read normally (and the teletext PID set
to 0), but once they are written back (due to some channel editing) the file
will have the new format.
- The EPG scanner now scans each transponder only once per cycle.
- Deleted recordings are now automatically removed from disk after a while (not
only when disk space is being needed for a new recording).
- Fixed repeat function in LIRC remote control.
- Changed the MAXDVBAPI macro in dvbapi.c to 4 in order to directly support the
maximum possible number of DVB cards.
- The 'Ca' parameter in the default 'channels.conf' has been changed from '2'
to '3' because the VDR prototype now has 3 DVB cards (and currently the CAM
module only works if it is inserted into the last DVB card).
- The "Now", "Next" and "Schedule" menus now remember the current channel and
restore the list when switching between them.
- The "Green" button in the "Recordings" menu can now be used to rewind a
recording and play it from the very beginning.
- Fixed handling ':' in timer filenames and '\n' in timer summaries (see FORMATS).
- When removing recordings empty directories are now removed from the video
directory.
- Added the "schnitt" tools from Matthias Schniedermeyer.
- New SVDRP command MESG to display a short message on the OSD.
- The Perl script 'svdrpsend.pl' can be used to send SVDRP commands to VDR.
- SVDRP can now immediately reuse the same port if VDR is restarted.
- SVDRP now has a timeout after which the connection is automatically closed
(default is 300 seconds, can be changed in "Setup").
- The compile time switch VFAT can be used to make VDR avoid the ':' character
in file names (VFAT can't handle them). Do 'make VFAT=1' to enable this.
- Support for DVB-C (thanks to Hans-Peter Raschke and Peter Hofmann).
See the INSTALL file for more information about the use of VDR with cable.
- Fixed an occasional segfault in the EIT processor.
- A value of '0' for the EPGScanTimeout setup parameter now completely turns off
scanning for EPG data on both single and multiple card systems.
- New setup parameter "PrimaryLimit" that allows to prevent timers from using the
primary DVB interface in multi card systems. Default value is 0, which means
that every timer may use the primary interface.
- The 'active' field of a timer will now be explicitly set to '1' if the user
modifies an active timer (see FORMATS for details).
- The new command line option -w can be used to activate a watchdog that makes
VDR exit in case the main program loop does not respond for more than the
given number of seconds. This is mainly useful in combination with the new
'runvdr' script that restarts VDR in case is has exited.
|
