summaryrefslogtreecommitdiff
path: root/config.c
AgeCommit message (Collapse)Author
2007-02-25Version 1.5.1vdr-1.5.1Klaus Schmidinger
- Added cDevice::HasCi() so that devices with Common Interface can be avoided when tuning to an FTA channel, thus preserving the CAM resources even on budget DVB cards (suggested by Petri Helin). - Fixed i18n characters for the Hungarian texts (thanks to Thomas Günther). - Now using cPipe instead of popen() in cCommand::Execute() to avoid problems with open file handles when starting background commands (thanks to Reinhard Nissl). - Removed 'assert(0)' from cDvbSpuDecoder::setTime() (thanks to Marco Schlüßler). - Fixed a possible crash when loading an invalid XPM file (thanks to Martin Wache). - Updated satellite names in 'sources.conf' (thanks to Thilo Wunderlich). - Adapted 'libsi' to DVB-S2 (thanks to Marco Schlüßler). - Fixed handling error status in cDvbTuner::GetFrontendStatus() (thanks to Reinhard Nissl). - Shutdown handling has been rewritten (thanks to Udo Richter). - Plugins can now implement the new function WakeupTime() to request VDR to wake up at a particular time (thanks to Udo Richter). - The HUP signal now forces a restart of VDR (thanks to Udo Richter). - cThread::EmergencyExit() has been replaced by ShutdownHandler.RequestEmergencyExit(). - Several references to "button" in a remote control context have been changed to "key" (based on a report from Marko Mäkelä regarding the "Menu button closes" text). The "MenuButtonCloses" parameter in 'setup.conf' has therefore been renamed to "MenuKeyCloses", accordingly. This will result in an "unknown config parameter: MenuButtonCloses" error message in the log file, so you may want to remove that entry from your 'setup.conf' file. - Simplified the error handling in cDvbTuner::GetFrontendStatus() (based on a discussion with Reinhard Nissl). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Increased the maximum number of DVB devices to 8 (thanks to Rolf Ahrenberg). - The new Setup parameter "Channel entry timeout" can be used to customize the time since the last keypress until a numerically entered channel number is considered complete, and the channel is switched (suggested by Helmut Auer). Setting this parameter to 0 turns off the automatic channel switching, and the user will have to confirm the entry by pressing the "Ok" key.
2006-07-23Version 1.4.1-2vdr-1.4.1-2Klaus Schmidinger
- Fixed the Makefile of the 'servicedemo' plugin, so that it defines the PLUGIN macro, which allows the Make.config file to react properly when compiling the plugin (reported by Bernd Melcher). Note to all plugin developers: a plugin's Makefile *must* define the PLUGIN macro, even if it doesn't use it itself! - Added a comment regarding the PLUGIN macro to the 'newplugin' script. - Added '--vfat' to the vdr.1 man page (reported by Udo Richter). - Removed a double fdopen() in cPipe::Open() (reported by Stefan Huelswitt). - Fixed handling the running status of EPG events before the currently running one, in case they are added after the current event. - cEIT::cEIT() now calls pSchedule->SetPresentSeen() even if OnlyRunningStatus is true. - Newlines in title and short text of an EPG event are now changed into blanks only after all other fixes, because a short text might become a description. - Fixed handling network masks in the svdrphosts.conf file (thanks to Patrick Maier). - Fixed handling relative volume settings in the call to cStatus::MsgSetVolume() (reported by Norbert Wentz). - Added a missing initialization of 'mutex' in cCiMenu::cCiMenu() and removed some superfluous semicolons in ci.c (thanks to Marco Schlüßler). - Fixed handling client side termination of SVDRP connections (thanks to Frank Schmirler). - cDevice::GetDevice() now prefers any device that's already receiving and doesn't require detatching receivers (suggested by Anssi Hannula). - Fixed handling numeric keys in the channel display after switching channel groups (thanks to Andreas Regel). - Menu items derived from cMenuEditIntItem now loop though their values if they have a dedicated minimum or maximum limit (suggested by Andy Grobb). Looping is only done for normal keypresses, not for repeated ones. This allows the user to scroll the value all the way to the limit by keeping the key pressed.
2006-04-17Version 1.3.47vdr-1.3.47Klaus Schmidinger
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed a crash when setting the time transponder in the Setup menu, caused by the new 'noneString' in cMenuEditChanItem (reported by Thomas Günther). - Added NULL checks to some strdup() calls in menuitems.c (suggested by Darren Salt). - Removed the unnecessary 'value' member from cMenuEditItem. - Fixed the initial setting of the time transponder setup parameter (reported by Thomas Günther). - Fixed unnecessary Set() calls in cMenuEditIntItem::ProcessKey(). - Allowing a tolerance for symbol rate values that are off by one (thanks to Richard Lithvall). - Added VBITeletextDescriptorTag, TeletextDescriptorTag, LocalTimeOffsetDescriptorTag and PremiereContentTransmissionDescriptor to 'libsi' (thanks to Marco Schlüßler). - Using geteuid() to check whether VDR is running as user 'root' (suggested by Tobias Grimm). - Added a missing "Key$" in skincurses.c (reported by Darren Salt). - Reintroduced the log message "deleting plugin: ..." when shutting down VDR (upon request by Ville Skyttä, as in the initial patch from Christoph Haubrich). - Fixed the vdr.1 man page (a single DVB card can record and do live tv). - The preferred audio language is now automatically selected when starting replay. - Updated the Danish OSD texts (thanks to Mogens Elneff). - The new function cPlugin::Active() can be used by a plugin to indicate that it is still busy and the system should not shut down or restart (based on a patch from Sascha Volkenandt). See PLUGINS.html for details. - Fixed setting the 'Delta' parameter when calling the shutdown script with no active timer (reported by Helge Lenz). - In order to make sure that plugins are compiled with the same DVB driver header files as VDR itself, the definition of DVBDIR has been removed from the VDR Makefile. If you are using a driver version that has its header files at a location other than /usr/include/linux/dvb, you can define DVBDIR in the Make.config file (see also INSTALL). Note that if you already have a Make.config file of your own, you should add the lines ifdef DVBDIR INCLUDES += -I$(DVBDIR)/include endif to its end, as in the new Make.config.template. Any reference to DVBDIR should be removed from all plugins' Makefiles, like this: ------------------------------------------------------------ --- PLUGINS/src/hello/Makefile 2005/11/11 13:20:14 1.10 +++ PLUGINS/src/hello/Makefile 2006/04/15 11:58:46 1.11 @@ -20,7 +20,6 @@ ### The directory environment: -DVBDIR = ../../../../DVB VDRDIR = ../../.. LIBDIR = ../../lib TMPDIR = /tmp @@ -40,7 +39,7 @@ ### Includes and Defines (add further entries here): -INCLUDES += -I$(VDRDIR)/include -I$(DVBDIR)/include +INCLUDES += -I$(VDRDIR)/include DEFINES += -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"$(PLUGIN)"' ------------------------------------------------------------ Thanks to Marco Schlüßler for pointing out this problem. - Implemented kNext and kPrev keys (based on a patch from Peter Juszack). See MANUAL for details. - Implemented kChanPrev (from a patch from Darren Salt). - The "Update channels" parameter in the "Setup/DVB" menu has been extended to allow updating only the PIDs (see MANUAL for details). When updating to this version of VDR, please verify that the setting is as you want it to be, because the values have been shifted. - The new APIVERSION (see config.h) now allows existing compiled plugins to be used with newer versions of VDR, as long as there have been no changes to the VDR header files since the last APIVERSION. Existing plugins' Makefiles should have all references to VDRVERSION changed to APIVERSION, like this: ------------------------------------------------------------ --- PLUGINS/src/hello/Makefile 2006/04/15 11:58:46 1.11 +++ PLUGINS/src/hello/Makefile 2006/04/16 09:03:50 1.12 @@ -28,9 +28,9 @@ -include $(VDRDIR)/Make.config -### The version number of VDR (taken from VDR's "config.h"): +### The version number of VDR's plugin API (taken from VDR's "config.h"): -VDRVERSION = $(shell grep 'define VDRVERSION ' $(VDRDIR)/config.h | awk '{ print $$3 }' | sed -e 's/"//g') +APIVERSION = $(shell sed -ne '/define APIVERSION/s/^.*"\(.*\)".*$$/\1/p' $(VDRDIR)/config.h) ### The name of the distribution archive: @@ -67,7 +67,7 @@ libvdr-$(PLUGIN).so: $(OBJS) $(CXX) $(CXXFLAGS) -shared $(OBJS) -o $@ - @cp $@ $(LIBDIR)/$@.$(VDRVERSION) + @cp $@ $(LIBDIR)/$@.$(APIVERSION) dist: clean @-rm -rf $(TMPDIR)/$(ARCHIVE) ------------------------------------------------------------ - If a timer is newly created from within the "Schedule" menu, and its event is already running or has its start time within the next two minutes, it now goes directly into the "Edit timer" menu in order to allow the user to make further changes to timer parameters before the actual recording starts (inspired by Christian Wieninger's "epgsearch" plugin). - Added format check to syslog_with_tid(). - Updated the INSTALL file's section about non-VDR files in the video directory (since version 1.3.38 disk access is done in a separate thread, so the watchdog timer won't hit). - Changed the behaviour of the "Use small font" setup option to *always* use the small font if set to '2' - even if it would have been a fixed font (suggested by Ronny Kornexl). - No longer using characters 0x01 and 0x02 for mapping single quote and slash in recording names (thanks to Patrick Fischer for reporting that this was a problem with XML). The single quote is not mapped at all, and the slash is interchanged with the tilde. Existing recordings will be handled like before, so there is no need to actually rename them. - The cRemote::CallPlugin() function now has a boolean return value that tells the caller whether initiating the plugin call was successful (suggested by Reinhard Nissl). If it returns false, another plugin call is currently pending and the caller should try again later. This also means that the SVDRP command PLUG can now return an error code is the call fails. - The new function cPlugin::MainThreadHook() can be used by plugins to perform actions in the context of the main program thread. Use this function with great care and only of you absolutely have to! See also PLUGINS.html.
2006-04-09Version 1.3.46vdr-1.3.46Klaus Schmidinger
- Fixed handling broken PMT records (thanks to Marcel Wiesweg for pointing out how to detect these). - Added a missing "Button$" for the Timer button and "Key$" in skinclassic.c (thanks to Rolf Ahrenberg). - Fixed broken entry 'A111.1W' in sources.conf (reported by Luca Olivetti). - Replaced the obsolete entry 'S21.5E' in the default 'diseqc.conf' with 'S13.0E' (reported by Ville Skyttä). - Fixed learning keys when VDR is already running (thanks to Jurij Retzlaff). - Fixed handling the system time transponder setting in the Setup/EPG menu, which was broken by the min/max fix in cMenuEditIntItem. - VPS timers now record only events that have exactly the given start time. This fix also implements recording several subsequent events that have the same VPS time (like a sports event with intermittent news breaks). - When checking for timers that have entered the "VPS margin", any free devices are now used to switch to the needed transponder. This improves cases where more than one VPS timer is about to start. - Fixed handling the VPS margin in case the event's duration is shorter than the margin. - Fixed handling VPS timers in case the primary device needs to switch to the timer's transponder. - Now avoiding the 'actual' device when starting a recording, so that a Transfer Mode for live tv isn't interrupted. - Fixed a typo in skins.h (thanks to Alexander Rieger). - cSkins::QueueMessage() called from a background thread with an empty message now clears all messages that have been previously queued by that thread and have not yet beed displayed (thanks to Alexander Rieger). - Fixed handling the color button texts when switching from the 'Schedule' menu of a channel without EPG info to the 'What's on now' menu (reported by Rolf Ahrenberg). - cMenuEditIntItem and cMenuEditChanItem can now be given strings to label the minimum and maximum values, and the case that no channel has been selected, respectively. - The initial channel and volume can now be defined in the "Setup/Miscellaneous" menu (based on a patch from Thomas Keil). - When hitting the end of a recording in fast forward mode, VDR no longer switches back to normal speed if the recording is already finished (thanks to Reinhard Nissl). - No longer calling cPlugin::ProcessArgs() if VDR is run with the --help or --version option, to avoid error messages from plugins (reported by Udo Richter). - Now checking whether there is any text before calling cStatus::MsgOsdTextItem() (reported by Joachim Wilke).
2006-02-26Version 1.3.44vdr-1.3.44Klaus Schmidinger
- Fixed setting the audio language codes in 'Transfer-Mode' (reported by Rolf Ahrenberg). The actual problem was the call to the Transferring() function in cDevice::AttachPlayer() before assigning the player. - Fixed removing the '-' when entering a channel number where there is no other one that fits the input (thanks to Joachim Wilke). - Fixed the 'libsi' function CharArray::checkSize(), which made a previous workaround in libsi/descriptor.c obsolete (thanks to Marcel Wiesweg). - The "Ok" key in the "Jump" mode of the replay progress display now confirms the jump instead of closing the display (thanks to Christoph Haubrich). - The 'summary' field of a timer definition has been renamed to 'aux', and is now only used for external applications to store auxiliary information with a timer, which has no meaning whatsoever to VDR itself. The contents of the 'aux' field of a timer is copied into the recording's 'info.vdr' file, using the tag character '@'. - The description of a recording is now taken exclusively from its related EPG data. If an application wants to use a different description it needs to set it with SVDRP/PUTE and use table ID 0x00, so that it won't be overwritten (as a side effect, however, this also disables VPS for such an event). - There is no more "Summary" menu when pressing "Ok" in the "Timers" menu. The "Ok" key now always opens the "Edit timer" menu. - The upper 16 bit of a timer's "flags" are no longer treated specially when a timer is modified in the "Edit timer" menu. If an external application needs to know if a timer was modified, it has to keep a copy of the timer's data and compare that to the actual data. - The new function cRecordingInfo::ChannelID() can be used to retrieve the ID of the channel a recording was made from. - The 'info.vdr' file of a recording now also contains the 'E' and 'V' records of the EPG event used when creating it. - The option "Setup/OSD/Sort timers" has been removed. Timers are always sorted by their start time and priority. - The "Blue" key in the "Timers" menu now displays the EPG info of the event the selected timer will record (if available). The "On/Off" function has been shifted to the "Red" button. Editing a timer is done by pressing "Ok". - When determining which event a timer is going to record, all available events in the future are now taken into account (no more limit to 4 hours in the future). This has been done so that the event info is available in the "Timers" menu when pressing the "Blue" button. In order to avoid unnecessary work, each timer now has its own timestamp to control whether its schedule has changed since the last time its event has been set. - Fixed setting events to timers in case a non-VPS event has expired. - There is now a log message "timer ... set to event ..." when defining a timer from the EPG menu. - Lines tagged with '#' in the 'info.vdr' file of a recording are now silently ignored when reading that file (suggested by Peter Bieringer). Such lines can be used by external tools to store arbitrary information. - The 'event id' in EPG data has been extended to 32 bit, so that external tools can generate ids that don't collide with those from the DVB data stream (suggested by Matthias Schniedermeyer). - The DrawBitmap() function now has a new parameter 'Overlay' that allows a bitmap to be drawn with a transparent background (thanks to Alexander Hans). - Fixed cSchedule::GetFollowingEvent() in case there is currently no present event running (thanks to Pekka Mauno).
2006-01-15Version 1.3.39vdr-1.3.39Klaus Schmidinger
- The SVDRP command LSTT now accepts the new option 'id' to have the channels of the timers listed with their unique channel ids instead of their numbers (suggested by Matthias Schniedermeyer). - Added a missing #include <linux/unistd.h> to thread.c (thanks to Ville Skyttä). - Fixed the "plugins-clean" and "plugins-install" targets in the Makefile (thanks to Andreas Brachold). - Fixed handling "more than 3 byte" key sequences in cKbdRemote::ReadKeySequence() (thanks to Peter Bieringer). If you are using the PC keyboard as remote control input you may need to make VDR newly learn the keys by removing the remote.conf file. - To avoid problems with access rights when VDR shall run as 'root' it now skips all SetCaps() and SetUser() calls when it is started as 'root' and "-u root" is given. - Added missing i18n entry for the "Timer" button (thanks to Ville Skyttä) - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Making the "Menu" key behave consistently has not been well received by several users, so the new option "Setup/OSD/Menu button closes" can be used to get the old behavior back (which also is the default value of this option). - Dropped the default vdr user. The program now always runs under the user id it was started from, unless the '-u' option is given and it was started from the 'root' user. If you want to have a default vdr user, you can activate and adjust the "VDR_USER = vdr" line in your Make.config file (from the original patch by Ludwig Nussel). - Key macros can now be defined for all non-modeless keys (suggested by Mirko Dölle). - Adjusted the "KEY MACROS" section of vdr.5 to the new plugin calling mechanism introduced in version 1.3.32. - Removed the now obsolete "ca.conf" section from vdr.1 (thanks to Ville Skyttä). - Added missing description of L and R circular polarization to 'diseqc.conf'. - Added a note about "modprobe capability" to INSTALL (suggested by Patrick Cernko). - Fixed canonicalizing the file name in the SVDRP command GRAB to allow full path names (thanks to Stefan Huelswitt). - Added a missing '-' to the example for viewing a grabbed image on a remote host (reported by Philippe Gramoullé). - Made the "What's on now/next?" menus a lot faster by storing a pointer to each channel's schedule in the cChannel data. - Made the log messages regarding lost lock of devices "info" instead of "error" (suggested by Andreas Brachold). - The SVDRP command GRAB allows file names without extension again (suggested by Stefan Huelswitt). - Pressing '0' in the "Schedule" menu now rotates through displaying "This event on this channel", "This event on all channels" and "All events on all channels". This can be used to find reruns of a given show, or the episodes of a series. Note that if there are many channels in your channels.conf, displaying the "All events on all channels" page may take a while. - The status markers in the "Schedule" menu are now only updated if a submenu is closed in which a timer has been modified, which speeds up closing submenus. - Now only writing Dolby Digital tracks into the 'info.vdr' file of a recording if Setup.UseDolbyDigital is true (suggested by André Weidemann). - Added a leading '0' to the day in the DayDateTime() function (thanks to Rolf Ahrenberg). - No longer displaying color buttons in the recording info menu if it has been invoked from a player (reported by Jürgen Schilling).
2006-01-08Version 1.3.38vdr-1.3.38Klaus Schmidinger
- Fixed handling second audio and Dolby Digital PIDs for encrypted channels (was broken in version 1.3.37). - Improved TS/PES conversion to better handle lost TS packets (thanks to Reinhard Nissl). - Limited the frequency of log messages from the cRepackers. - Now using the gettid() syscall to get a thread's pid, so that we get a useful value on NPTL systems (suggested by Johannes Stezenbach). - Fixed the RCU remote control handling to avoid problems with NPTL (thanks to Andreas Share for reporting a lockup with the RCU on NPTL systems). - When displaying the amount of free disk space, the space consumed by recordings that have been "deleted" but not yet actually "removed" is now taken into account (suggested by Christian Vogt). - Now avoiding unnecessary disk access when checking if there are deleted recordings that need to be removed (reported by Carsten Koch). - Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now a deleted recording is retained at least DELETEDLIFETIME seconds before actually removing it. The value of DELETEDLIFETIME has been changed to 300. So after (possibly inadvertently) deleting a recording, there will be at least 5 minutes in which it can be recovered (unless a new recording immediately requires the disk space). The count starts again at 0 every time VDR is started. - Fixed a possible crash when displaying the "Low disk space!" message from a background thread (thanks to Christof Steininger). - Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler). - Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground and background threads won't interfere. - The main menu now dynamically updates its contents in case an instant recording or replay stops, etc. - The version number of EPG events is now also stored in the epg.data file (thanks to Kendy Kutzner). - EPG events that are no longer in the currently broadcasted data stream are now automatically deleted. - Removed an invalid access to Event->schedule in cSchedule::DelEvent(). - Modified cSchedule::Cleanup() (events are always sorted by time). - Schedules are now cleaned up once every hour (not only at 05:00). - The "Schedule" and "What's on now/next?" menus are now updated if a timer is set or modified. - cTimer no longer has its own 'schedule' member, it rather uses that of the event it has been set to. - The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus now immediately creates a timer for the selected event and marks it with 'T'. If the event is already marked with 'T', the "Red" button opens the "Edit timer" menu for that timer. - Removing deleted recordings is now done in a separate thread. - Dropped the unused "stop recording on primary interface" stuff. - Converting a grabbed image to JPEG is now done with the new function RgbToJpeg() (see tools.h). - The SVDRP command GRAB now determines the image type (JPEG or PNM) from the extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit 'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but has no meaning any more. - The function cDevice::GrabImage() no longer writes the grabbed image to a file, but rather returns a pointer to the image in memory. The wrapper function cDevice::GrabImageFile() can be used to write the grabbed image directly to a file. Plugins that used the old version of cDevice::GrabImage() need to be adapted to the new interface. - The new class cBase64Encoder (see tools.h) can be used to encode data in base64 (thanks to Bob Withers for publishing his Base64 class). - The SVDRP command GRAB now writes the image data to the SVDRP connection (encoded in base64) if the given file name consists of only the file extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file name (based on a suggestion from Darren Salt). A simple way of viewing a grabbed image on a remote host is: svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display - - The new command line option '-g' must be given if the SVDRP command GRAB shall be allowed to write image files to disk. The parameter to this option must be the full path name of an existing directory, without any "..", double '/' or symlinks. By default, or if "-g- is given, grabbing to files is not allowed any more because of potential security risks. - Modified the way the SVDRP command GRAB writes the grabbed image to a file to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino Peña): + The file handle is now opened in a way that it won't follow symbolic links (suggested by Darren Salt). + The given file name is now canonicalized, so that it won't contain any ".." or symlinks (suggested by Darren Salt). + Grabbing to files is limited to the directory given in the the command line option '-g'. By default grabbing to files is not allowed any more. - Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos). - Changed all "illegal" to "invalid" in error messages (there's nothing "illegal" in VDR ;-). - When started as user 'root' VDR now switches to a lesser privileged user id, keeping the capability to set the system time (based on a patch from Ludwig Nussel). By default the user id 'vdr' is used, which can be changed through the new command line option '-u'. Note that for security reasons VDR will no longer run as user 'root' (unless you explicitly start it with '-u root', but this is not recommended!). The 'runvdr' script has been changed to use the '-u' option. - Changed the API of the functions cStatus::Recording() and cStatus::Replaying(), so that they can provide the full file name of the recording. Plugins that use these (or the related cStatus::Msg...() functions) need to be adapted (suggested by Andreas Brugger). - The DVB devices now retune (and, if applicable, resend the DiSEqC data) if the lock is lost (based on a patch from Reinhard Nissl). - Fixed handling multi byte key sequences in cKbdRemote (based on a patch from Jürgen Schneider). - Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco Schlüßler). - Made the static cControl functions thread safe (thanks to Patrick Fischer). - Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid warnings with g++ 4.1.0 (thanks to Ville Skyttä). - Fixed incrementing the 'state' variables in the repacker classes in remux.c to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä). - The Makefile now reports a summary of failed plugins (thanks to Udo Richter). - The cTimer constructor can now take an optional cChannel (suggested by Patrick Fischer). - Fixed setting the main thread id if VDR is running as a daemon. - Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl). - Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner). - Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger). - Now using FE_READ_STATUS to read the current frontend status (suggested by Holger Wächtler). - The "Menu" key now behaves consistently. If there is anything on the OSD, it is closed when the "Menu" key is pressed, and if there is nothing on the OSD, the "Menu" key opens the main menu (suggested by Luca Olivetti). - The new option "Setup/OSD/Timeout requested channel info" can be used to turn off the automatic timeout of the channel display in case it was invoked by a press of the "Ok" key (suggested by Thiemo Gehrke). - A message is now given when an instant recording is started (suggested by Helmut Auer). Actually the code was already there, just commented out - don't remember why it wasn't active... - Removed an obsolete "Summary" text from i18n.c and preceded all key definition texts with "Key$" to avoid duplicates (reported by Lucian Muresan). - Preceded all button texts with "Button$". - Removed obsolete "Eject", "Language" and "scanning recordings..." texts. - Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill). - Disabled the use of "fadvise" in cUnbufferedFile because there have been several reports that it causes more problems than it solves (suggested by Petri Hintukainen). If you want to use "fadvise", you can activate the line //#define USE_FADVISE in tools.c. - Removed unused 'offset' member from cOsdItem. - In the "Channels" menu the numeric keys now position the cursor to the channel with the given number (see MANUAL, section "Remote Control Keys", note (3) for details). - The "Mark/Move" function in the "Channels" menu now also works in the non-numeric sort modes. - The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if this is a menu. - The new "Info" key brings up information on the currently viewed programme or recording. For a live programme this is the same as "Schedule/Ok", i.e. the description of the current EPG event. For a recording this is the same as shown by the "Info" button in the "Recordings" menu. Plugins that implement players can overwrite their cControl::GetInfo() function to show their own info (see PLUGINS.html for details). Pressing the "Info" key again while the info is displayed will close the OSD. In order to assign this new key to an existing remote control setup, the remote.conf file needs to be deleted and VDR has to be restarted to go through the process of learning the remote control keys. - Any cReceivers still attached to a cDevice when that device switches to a different transponder are now automatically detached (suggested by Patrick Fischer). - The "flags" of a timer are now handled as an unsigned integer value. In order to do this, the interface of cMenuEditBitItem also had to be changed. - In string entry fields (like, e.g., the file name of a recording) the characters can now be entered by pressing the numeric keys, the same way as on a telephone keypad (based on the "Easy Input" patch from Marcel Schaeben). - Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch from "single shot" to "weekly", followed by the "Right" key (reported by Andreas Böttger). - The file 'ca.conf' is obsolete and has been removed. - Revised all descriptions regarding CICAM. - Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling. - Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack() (thanks to Reinhard Nissl). - Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo Schneider). - Cleaned up some trailing white space.
2005-09-11Version 1.3.32vdr-1.3.32Klaus Schmidinger
- Added some missing braces in remux.c (thanks to Wayne Keer for reporting this one). - Removed unused MAINMENUENTRY from svdrpdemo.c (thanks to Udo Richter for reporting this one). - Fixed appending sequence end code in cDvbPlayer::Goto() (thanks to Reinhard Nissl). - Fixed syncing in cRepacker (thanks to Reinhard Nissl). - Now always using stream id 0xE0 for the video stream, to avoid problems with post processing tools that choke on different ids (suggested by Reinhard Nissl). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed cDvbPlayer::SkipFrames() to properly handle radio recordings (thanks to Reinhard Nissl). - Updated the Swedish OSD texts (thanks to Tomas Prybil). - Updated the Slovenian OSD texts (thanks to Matjaz Thaler). - Updated the Danish OSD texts (thanks to Mogens Elneff). - Made LIRC command parsing more robust (thanks to Ville Skyttä). - Introduced a separate 'plugins-install' target in the Makefile (thanks to Daniel Thompson). - Re-introduced the code that waits for a tuner lock in VDR/device.c, since apparently some users actually need it. It's not active by default, you'll have to define the WAIT_FOR_TUNER_LOCK macro in that file if you need it (suggested by Malcolm Caldwell). - Adjusted the Makefile to the dvb-kernel driver on kernel 2.6 and up (thanks to Lauri Tischler). - Repeat keys are now ignored when waiting for a keypress to cancel an operation (thanks to Marko Mäkelä). - The main menu function of a plugin can now be activated through a key macro of the form "@plugin" even if that plugin doesn't have a main menu entry (using part of a patch by Hardy Flor, which originally implemented calling plugins from SVDRP). - The menu timeout handling is now done centrally in the main program loop. - Added missing help for the 'help' keyword in the SVDRP command PLUG. - The main menu function of a plugin can now be called programmatically through the static function cRemote::CallPlugin(). - The SVDRP command PLUG now has a new option 'main' which can be used to initiate a call to the main menu function of a plugin (using part of a patch by Hardy Flor). - The new command line option '--vfat' can be used to make VDR encode special characters in recording file names, even if it wasn't compiled with VFAT=1 (suggested by Peter Bieringer). The compile time option VFAT still exists and creates a VDR that always behaves as if it were called with '--vfat'. - Replaced the ':' delimiter between hour and minute in recording file names with a '.' under Linux, too. Existing recordings with ':' as delimiter will still work. - Implemented the SVDRP command MOVC (thanks to Andreas Brachold). - Added support for multiple audio language codes in ISO639LanguageDescriptors to 'libsi' (thanks to Marcel Wiesweg). - Changed the audio PID language codes to hold up to two 3 letter codes, separated by '+', to store separate languages broadcast in two channel audio mode. - If the preferred audio language is broadcast on a PID that has two different languages in the two stereo channels, the audio channel is now properly set when switching to such a channel (thanks to Mogens Elneff for his help in testing this). - Fixed some typos in MANUAL (thanks to Ville Skyttä). - Fixed the default value for "Setup/EPG bugfix level" (thanks to Ville Skyttä for reporting this one). - Fixed defining timers that only differ in the day of week (thanks to Patrick Rother for reporting this one). - Fixed converting summary.vdr files that would result in a very long 'short text' (thanks to Carsten Koch). - Implemented a hash for the channels to reduce the system load in the EIT scanning thread (based on a patch by Georg Acher).
2005-08-15Version 1.3.29vdr-1.3.29Klaus Schmidinger
- Fixed a race condition in cTransfer (thanks to Klaus Heppenheimer for reporting this one). In doing so, the 'active' variables used by the actual derived cThread classes have been replaced by the cThread::Running() function. Plugin authors may want to check their derived cThread classes and replace any 'active' variables the same way as, for instance, done in transfer.c. - Fixed handling EPG data for time shifted events (thanks to Marco Schlüßler). - Increased the default value for 'Min. user inactivity' to 300 minutes (suggested by Helmut Auer). - Now storing the channel id in the info.vdr file even if there is no EPG info available (thanks to Andreas Brachold for reporting that there are empty info.vdr files created in that case). - Added some 'mkdir -p' to the Makefile's 'install' target (thanks to Wayne Keer). - Changed the title of the recording info menu (thanks to Rolf Ahrenberg). - Fixed handling the frame number display if '7' is pressed before the first editing mark, or '9' after the last one (thanks to Thomas Günther). - Now discarding any previous numerical input to switch channels if Up, Down, Channel+, Channel-, Left or Right is pressed (thanks to Wolfgang Rohdewald for reporting a problem with this). - Pressing Ok while entering a channel number now immediately switches to that channel, without waiting for further input. - Avoiding unnecessary OSD draw operations caused by the audio track description display in the ST:TNG skin's channel display (thanks to Oliver Endriss for reporting this). - Removed the VIDEO_STILLPICTURE_WORKS_WITH_VDR_FRAMES stuff from cDvbDevice::StillPicture(), since apparently the VIDEO_STILLPICTURE call works.
2005-08-07Version 1.3.28vdr-1.3.28Klaus Schmidinger
- Added a sleep in cDvbPlayer::Action() in case there is no data to send to the device, which avoids a busy loop on very fast machines (thanks to Martin Wache). - Modified the description of cDevice::Poll() to avoid misunderstandings. - Updated Croatian language texts (thanks to Drazen Dupor). - cDvbPlayer::Goto() now appends a Sequence End Code to get the image shown immediately with softdevices (thanks to Reinhard Nissl). - Reactivated cVideoRepacker in remux.c after some fixes (thanks to Reinhard Nissl). - Removed the fix for handling VPS timers, so that they only record if the event they are assigned to actually has the given VPS time. This has caused repeating VPS timers to stop recording prematurely. - Avoiding duplicate components in EPG events when reading epg.data or in the PUTE SVDRP command (thanks to Olaf Titz for reporting this one). - Added the command line options '--lirc', '--rcu' and '--no-kbd' to allow setting the remote control at runtime (based on a patch by Darren Salt). - Now checking whether timers or channels are currently being edited via the menu before making changes through SVDRP (thanks to Andreas Brugger for reporting a problem with this). - Files and directories are now created with rights according to the shell's umask settings (thanks to Andreas Brachold). - Fixed the cChannel copy constructor (thanks to Marcel Wiesweg for pointing out a problem with it). - Fixed an out-of-bounds memory access with audio language ids (thanks to Matthias Lenk for reporting, and Udo Richter for suggesting a fix). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added missing storing of the MenuScrollPage parameter (thanks to Frank Krömmelbein). - Added cRemux::SetTimeouts() for better use of cRemux in a single thread (thanks to Udo Richter for reporting a problem with this). - Modified cEITScanner::Process() so that it uses the primary device if it is replaying and is the only device that provides the given transponder, and that a forced EPG scan works even if EPG scan timeout is set to 0 (thanks to Bernhard Stegmaier for reporting a problem with this). - Fixed cDvbSpuBitmap::putPixel() (thanks to Reinhard Nissl). - Fixed setting system time to avoid time jumps in case of faulty data (thanks to Andreas Böttger). - Fixed a memory leak in the SVDRP command LSTE (thanks to Stefan Huelswitt).
2005-06-19Version 1.3.27vdr-1.3.27Klaus Schmidinger
- Fixed handling 'page down', which was broken in version 1.3.26 (thanks to Udo Richter). - Modified page scrolling behaviour (based on a suggestion by Patrick Gleichmann). - The new setup option "OSD/Scroll wraps" can be used to activate wrapping around in menu lists (based on a suggestion by Patrick Gleichmann). - Removed the NPTL check at startup, since several users have reported that VDR now runs fine with NPTL. - Fixed handling VPS timers, so that they only record if the event they are assigned to actually has the given VPS time. - Disabled cVideoRepacker in remux.c, because it has caused several problems during recording. If you want to test (and maybe debug) it, activate the line //#define TEST_cVideoRepacker in remux.c. - When drawing a bitmap to the OSD, the existing palette of the target can now be replaced with the new one instead of adding the new entries (thanks to Andreas Regel).
2005-02-27Version 1.3.22vdr-1.3.22Klaus Schmidinger
- Removed some unneeded code and fixed access to unallocated memory in cEvent::FixEpgBugs() (thanks to Wolfgang Rohdewald). - Avoiding unnecessary calls to SetPid() in cDvbDevice::SetAudioTrackDevice() (thanks to Marco Schlüßler). - No longer calling EnsureAudioTrack() in cDevice::SetChannel() if a Transfer Mode is started, to avoid setting the audio PID on the primary device (thanks to Marco Schlüßler for pointing this out). - Replaced the call to system("sync") in SpinUpDisk() with fdatasync(f) to avoid problems on NPTL systems (thanks to Chris Warren for pointing this out). - Increased POLLTIMEOUTS_BEFORE_DEVICECLEAR in transfer.c to 6 to avoid problems with the larger buffer reserve (thanks to Marco Schlüßler). - Fixed the call to SetVideoFormat() in cDvbDevice::cDvbDevice() (parameter is _bool_). - Added support for setting the video display mode (thanks to Marco Schlüßler). - The new setup option "DVB/Video display format" can be used to define which display format to use for playing wide screen video on a 4:3 tv set. - Changed MAXDPIDS to 16 (8xAC3 + 8xDTS) (thanks to Werner Fink for pointing this out). - Completed Dutch language texts (thanks to Hans Dingemans). - Added 'smi' to the Finnish language codes (thanks to Rolf Ahrenberg). - Fixed ensuring there is a current audio track in case there is only one track (thanks to Werner Fink for reporting this one). - Improved automatic audio track selection. - Keeping the track language codes and descriptions in Transfer Mode (thanks to Luca Olivetti). - Fixed handling repeated kAudio keys. - Improved displaying the the current audio track in the ST:TNG channel display.
2005-02-06Version 1.3.20vdr-1.3.20Klaus Schmidinger
- Fixed displaying the "Audio" menu with the "Green" button from the "Main" menu in case there is only one audio track (thanks to Sascha Volkenandt for reporting this one). - Now setting primaryDevice = NULL before deleting the devices in cDevice::Shutdown() to avoid problems in case other threads access it (thanks to Wolfgang Rohdewald for pointing this out). - Fixed a buffer overflow in case a station defines all 32 audio PIDs (thanks to Christian Jacobsen for reporting this one). - Fixed masking SubStreamType in cDevice::PlayPesPacket() (thanks to Werner Fink for pointing out this one). - The new function cPlugin::Stop() shall be used to stop any background activities of a plugin. Previously this was done in the plugin's destructor, but it is better to do this in a dedicated function that can be called early when shutting down. - Moved the call to SetAudioChannel(0) into cDevice::ClrAvailableTracks() to have it executed also when starting a replay. - Completed the Danish OSD texts (thanks to Mogens Elneff). - Completed the French OSD texts (thanks to Olivier Jacques). - The new setup option "OSD/Channel info time" can be used to define the time after which the channel display is removed if no key has been pressed (thanks to Olivier Jacques). - Modified cDolbyRepacker to make sure PES packets don't exceed the requested length (thanks to Reinhard Nissl). - Fixed several memory leaks that were introduced through the use of cString (thanks to Stefan Huelswitt for reporting these). - Added CMD_SPU_CHG_COLCON to cDvbSpuDecoder::setTime() (thanks to Marco Schlüßler). - Making sure the current audio track is actually one of the ones available in a recording (thanks to Sascha Volkenandt for reporting a problem when starting replay of a recording that has no Dolby Digital audio after switching to a channel that has DD and selecting the DD audio track). - Removed 'flags' from tTrackId (thought we would need this, but apparently we don't). - Making sure the "Mute" and "Volume+/-" keys don't interfere with digital audio. - Fixed the "pre 1.3.19" compatibility mode for old Dolby Digital recordings (thanks to Werner Fink for pointing out that this can be triggered in the default branch). - Calling pesAssembler->Reset() in cDevice::AttachPlayer() to avoid problems with residual data in replay and Transfer Mode (thanks to Werner Fink for pointing this out). - Added MPEG1 replay capability to cPesAssembler (thanks to Stefan Huelswitt).
2005-01-09Version 1.3.18vdr-1.3.18Klaus Schmidinger
- Removed an unused variable from cTimer::GetWDayFromMDay() (thanks to Wayne Keer for reporting this one). - Some more changes to the 'childTid' handling in cThread (based on suggestions by Stefan Huelswitt). - Fixed the spelling of 'canceling' (thanks to Wayne Keer for reporting this one). - Re-introduced a sleep to cDvbPlayer::Action() to avoid high CPU load in still picture mode (thanks to Reinhard Nissl for reporting this one). - Fixed a possible race condition in generating the DVB device names (thanks to Rainer Zocholl for reporting this one). - Changed the way PES packets are played to allow replay of AC3 sound over the full featured DVB cards (partially based on a patch from Werner Fink). + The new function cDevice::PlayPes() is now called with the complete PES data stream and calls PlayVideo() and PlayAudio() as necessary. + cDevice::PlayVideo() is now only called with actual video PES packets. + cDevice::PlayAudio() is now called with the actual audio PES packets, which can be either "normal" audio or AC3 data. You need at least firmware version 0x261d to replay AC3 sound over a full featured DVB card. This function now has an 'int' return value. + PlayAudio() of derived cDevice classes shall no longer call the base class function. It shall just play the given data as audio. + cPlayer::PlayVideo() and cPlayer::PlayAudio() are now obsolete and have been replaced with cPlayer::PlayPes(). + All StripAudioPackets() functions are now obsolete. The functionality has been moved into cDevice::PlayPes(), where only the video and audio packets that are actually required will be processed. + All audio track handling is now done by cDevice; cTransfer and cDvbPlayer no longer care about audio tracks. cPlayer, however, still has the virtual hooks for audio track handling in order to allow plugins to implement players that have their own idea about this. + cChannel::[AD]pid[12]() have been replaced with cChannel::[AD]pid(int i) to allow access to all available PIDs. - Escaped the '-' and 'ö' characters in the man pages (thanks to Darren Salt for pointing this out). - Completed the Italian OSD texts (thanks to Sean Carlos). - Fixed setting 'synced' in cRemux when recording radio channels (thanks to Laurence Abbott). - Removed the LOCK_THREAD from the LIRC thread (thanks to Ludwig Nussel). - Fixed genfontfile.c (sometimes the character width was wrong, and the codes were shifted one too far to the left). - Fixed the character width and shifted the codes one to the right in all font files. - Renamed font???.c to font???-iso8859-1.c for symmetry. - Switched the character set to iso8859-15 for English, German and Finnish (thanks to Andreas Brugger for reporting the missing Euro sign in iso8859-1). - Added 'channels.conf.terr' entries for Lübeck (thanks to Stefan Hußfeldt). - Fixed a race condition in starting a thread (thanks to Reinhard Nissl for reporting this one). - Replaced non-threadsafe library functions with their threadsafe versions (thanks to Rainer Zocholl for pointing this out). - Other non-threadsafe functions have been replaced by threadsafe classes that hide the actual buffering. In particular these are: readdir() -> cReadDir readline() -> cReadLine - Several formerly non-threadsafe functions now have a return type of cString: cChannel::ToText() tChannelID::ToString() cEvent::GetDateString() cEvent::GetTimeString() cEvent::GetEndTimeString() cEvent::GetVpsString() cMark::ToText() cTimer::ToText() cSource::ToString() cTimer::PrintDay() cTimer::PrintFirstDay() PrefixVideoFileName() IndexToHMSF() ChannelString() strescape() AddDirectory() itoa() WeekDayName() DayDateTime() When using these functions in a 'const char *' context there is nothing special to consider, except that you can no longer have a pointer to the return value, as in const char *date = DayDateTime(); Although this will compile without error message, the resulting 'date' will not be valid after this line. Use this instead: cString date = DayDateTime(); In a 'const void *' context (as in printf() etc.) the result needs to be dereferenced with a '*', as in printf("%s", *DayDateTime()); to make it a 'const char *'. - Removed delay_ms(), using cCondWait::SleepMs() instead. - Replaced time_ms() with a threadsafe and non-overflowing cTimeMs (thanks to Rainer Zocholl for pointing out this problem). - Added cDevice::mutexReceiver to avoid a race condition when attaching/detaching receivers from different threads. - The new remote control button "Audio" can be used to switch between different audio tracks. The "Green" button in the "Main" menu has been changed from "Language" to "Audio", since it now also controls switching between normal and Dolby Digital audio tracks (see MANUAL for details). - The description of the audio tracks is now taken from the "component descriptors" that are broadcast in the EPG data. However (as no big surprise), not all channels actually provide useful data here, so there are now some additional EPG bugfixes, which can be activated by setting the "EPG bugfix level" to 3. - The format of the 'epg.data' files has been extended by the new tag 'X', which contains the stream components of an event (see man vdr(5) for details). - The cStatus class now has the new member function SetAudioTrack(), which can be used to get notified when the audio track has been switched, and the new member function SetAudioChannel() which is called when the audio channel is changed. - Skins need to implement the new cSkinDisplayTrack class to display the audio track menu. - The ST:TNG skin now displays the current audio track description (if any) at the botton left side. - The new setup option "DVB/Audio languages" can be used to control which audio language shall be selected in case a channel broadcasts in different languages (see MANUAL for details). - The "Left" and "Right" keys in the "Audio" menu can be used to switch between the left and right stereo channels in case there are different audio tracks in these channels (see MANUAL for details). - Fixed a possible race condition in cDevice::Action() (thanks to Mattias Grönlund). - Fixed the default quality value when grabbing a JPEG image (thanks to Patrick Gleichmann). - Fixed deleting a menu item in case the next item is not selectable (thanks to Dino Ravnic). - Implemented displaying mandatory subtitles in the SPU decoder (thanks to Marco Schlüßler). - The setup option "Recording/Record Dolby Digital" has been renamed and moved to "DVB/Use Dolby Digital". It now controls whether Dolby Digital is recorded and whether an available DD audio track will appear in the "Audio" menu. - Added support for circular polarization (thanks to Jonan Santiago). - Thanks to Werner Fink, Reinhard Nissl, Sascha Volkenandt and Bjørnar Nilsen for their support in testing and fine tuning this version.
2004-11-01Version 1.3.15vdr-1.3.15Klaus Schmidinger
- Fixed some typos in the Makefile's 'font' target (thanks to Uwe Hanke). - Added more checks and polling when getting frontend events (based on a patch from Werner Fink). - No longer explicitly waiting for a tuner lock when switching channels (apparently setting "live" PIDs before the tuner is locked doesn't hurt). Moved the wait into cDevice::AttachReceiver() instead. - Immediately displaying the new channel info when switching channel groups. - Moved the main program loop variables further up to allow compilation with older compiler versions (thanks to Marco Schlüßler for reporting this one). - Now calling pthread_cond_broadcast() in the destructor of cCondWait and cCondVar to make sure any sleepers will wake up (suggested by Werner Fink). Also using pthread_cond_broadcast() instead of pthread_cond_signal() in cCondWait, in case there is more than one sleeper. - Making sure that timers and channels are only saved together, in a consistent manner (thanks to Mirko Dölle for reporting a problem with inconsistent channel and timer lists). - Now handling the channel name, short name and provider separately. cChannel therefore has two new functions, ShortName() and Provider(). ShortName() can be used to display a short version of the name (in case such a version is available). The optional boolean parameter of ShortName() can be set to true to make it return the name, if no short name is available. The sequence of 'name' and 'short name' in the channels.conf file has been swapped (see man vdr(5)). - Added the 'portal name' to cChannels (thanks to Marco Schlüßler). - Fixed handling key codes that start with 0x1B in the KBD remote control code. - Now using qsort() to sort cListBase lists. For this, the virtual function cListObject::operator<() has been replaced with cListObject::Compare(). Plugins that implement derived cListObject classes may need to adjust their code. - The "Channels" menu can now be sorted "by number" (default), "by name" and "by provider". While in the "Channels" menu, pressing the '0' key switches through these modes. - Fixed the buffer size in cRecording::SortName(). - Now displaying the name of the remote control for which the keys are being learned inside the menu to avoid overwriting the date/time in the 'classic' skin (thanks to Oliver Endriss for reporting this one).
2004-05-16Version 1.3.7vdr-1.3.7Klaus Schmidinger
- Fixed a memory leak in thread handling when using NPTL (thanks to Jon Burgess). - Fixed handling Setup.RecordDolbyDigital, which was broken since version 1.1.6. - Fixed handling text lengths for itemized EPG texts (thanks to Marcel Wiesweg). - Fixed the help for LSTE and LSTR (was broken in 1.3.6). - Improved iso8859-7 fonts (thanks to Dimitrios Dimitrakos). - Added some 3-letter language codes (thanks to Marcus Mönnig). - Added language code handling to the subtitling descriptor in 'libsi' (thanks to Pekka Virtanen). - Moved several menu item classes from menu.c to menuitems.[hc] to make them available for plugins. - The epg2html.pl script now handles '|' in description texts. - The new setup option "OSD/Use small font" can be used to control the use of the small font (see MANUAL for details). - Swapped osd.[hc] and osdbase.[hc] to have the virtual OSD base class named cOsd. Plugins may need to adjust their #include statements. - Colors are now given as AARRGGBB instead of AABBGGRR. The values are mapped to the driver's (wrong) sequence in dvbosd.c (this should really be fixed in the driver, together with the endian problem). - The new OSD setup parameters "Left" and "Top" can be used to define the top left corner of the OSD. - The OSD size parameters are now in pixel (as opposed to formerly characters). When reading a 'setup.conf' file from an older version of VDR, the OSDwidth and OSDheight values will be converted to pixel automatically. - The OSD is now fully device independent. See the comments in VDR/osd.h and the description in PLUGINS.html for information on how a plugin can implement an OSD display on arbitrary hardware. - The OSD (actually its cBitmap class) can now handle XPM files. There are several XPM files in the VDR/symbols directory which can be used by skins (some of these have been taken from the "elchi" patch). See VDR/skinsttng.c for examples on how to use these. - Due to the changes in the OSD handling the DEBUG_OSD option for a textual OSD has been dropped. There will be a plugin that implements a skin with this functionality later. - The entire OSD display can now be implemented via "skins". See VDR/skins.[hc], VDR/skinclassic.[hc], VDR/skinsttng.[hc] and PLUGINS.html for information on how a plugin can implement its own skin. By default VDR comes with a "Classic" skin that implements the OSD display known from previous versions, and the new skin named "ST:TNG Panels", which is also the default skin now. The actual skin can be selected through "Setup/OSD/Skin". - The colors used in a skin can now be configured using "themes". See PLUGINS.html for information on how a skin can make use of themes, and man vdr(5) for the structure of a theme file. The actual theme to use can be selected through "Setup/OSD/Theme". - Added Croatian language texts (thanks to Drazen Dupor). NOTE: there is apparently a problem with the newly introduced iso8859-2 font, because as soon as Setup/OSD/Language is set to Croatian (currently the last one in the list) everything freezes and the vdr processes have to be killed with -9 and the driver needs to be reloaded. Maybe somebody else can find out what's going wrong here... - Added missing NULL checks when accessing sectionHandler in device.c (thanks to Pekka Virtanen). - Fixed setting the time from the DVB data stream (thanks to Helmut Auer for pointing out a frequency/transponder handling mixup). This now also takes the actual source (sat, cable etc.) into account. Please go into "Setup/EPG" and set the "Set system time" and "Use time from transponder" parameters accordingly (this is necessary even if you have already set them before!).
2004-03-14Version 1.3.6vdr-1.3.6Klaus Schmidinger
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed some descriptor handling in 'libsi' (thanks to Stéphane Esté-Gracias). - Fixed handling the current menu item (thanks to Marc Hoppe). - Fixed assigning events to timers (they no longer get "stuck"). - Added log entries whenever the running status of an event changes (currently only logging the first 30 channels). - Fixed handling timers in VPS margin if the EPG scan is turned on (the EPG scan switched the device away from the channel, so it wouldn't see the change of the running status). - Fixed handling "itemized" texts in EPG data (thanks to Stéphane Esté-Gracias for pointing out this problem, and Marcel Wiesweg for improving 'libsi'). - Fixed handling VPS times at year boundaries. - Avoiding too many consecutive "ring buffer overflow" messages (which only slowed down performance even more). - Taking the Sid into account when detecting version changes in processing the PMT (thanks to Stéphane Esté-Gracias for pointing out this problem). - Completed the Russian OSD texts (thanks to Vyacheslav Dikonov). - Any newline characters in the 'description' of EPG events are now preserved to allow texts to be displayed the way the tv stations have formatted them. This was also necessary to better display itemized texts. - Fixed detecting the running status in case an empty EPG event is broadcast (thanks to Michael Pennewiß for pointing this out). - Improved performance when paging through very long menu lists. - Removed cSchedule::GetEventNumber() and cSchedule::NumEvents(). There is now cSchedule::Events() that returns the list of events directly. - Avoiding occasional bad responsiveness to user interaction caused by assigning events to timers. - Now explicitly turning on the LNB power at startup, because newer drivers don't do this any more (thanks to Oliver Endriss for pointing this out).
2004-02-29Version 1.3.5vdr-1.3.5Klaus Schmidinger
- Fixed reading the EPG preferred language parameter from 'setup.conf'. - Fixed switching to a visible programme in case the current channel has neither a video nor an audio PID. - Fixed editing channels (SID now range checked) and creating new channels (NID, TID and RID are now set to 0). - Fixed transponder handling to make it work with satellites that provide two transponders on the same frequency, with different polarization, like Hispasat at S30.0W (thanks to Thomas Bergwinkl for pointing this out). See man vdr(5) for details about the enhanced channel ID format. - Since there appears to be no general solution for the UPT error yet, a recording now initiates an "emergency exit" if the number of UPT errors during one recording exceeds 10 (suggested by Gregoire Favre). Since the UPT error doesn't happen on my system, this has not been explicitly tested. The "preliminary fix" for the UPT error in VDR/dvbdevice.c has been disabled by default, since it makes channel switching unpleasently slow. If you want to have that workaround back, you can uncomment the line //#define WAIT_FOR_LOCK_AFTER_TUNING 1 in VDR/dvbdevice.c. - Adapted the 'sky' plugin to use the actual channel IDs, and to fetch EPG data from www.bleb.org. - Limited automatic retuning to devices that actually provide the transponder (necessary for the 'sky' plugin). - Fixed handling receivers in the 'sky' plugin, so that a recording on the same channel won't interrupt an ongoing Transfer Mode. - Added subtable ID and TSDT handling to 'libsi' (thanks to Marcel Wiesweg). - Fixed some Russian OSD texts (thanks to Vyacheslav Dikonov). - Added the 'running status' to the EPG events. This is necessary for implementing the VPS function for recording. - Removed the obsolete 'present' and 'following' handling from the EPG data. - The EPG data is now always kept sorted chronologically in the internal data structures. This also means that any EPG data retrieved through the SVRDP command LSTE is guaranteed to be sorted by start time. - Now using the 'running status' in the channel display, so that a programme that has an end time that is before the current time, but is still running, will still be shown in the display (provided the broadcasters handle the 'running status' flag correctly). This also applies to programmes that have a start time that is in the future, but are already running. - Implemented an "EPG linger time", which can be set to have older EPG information still displayed in the "Schedule" menu (thanks to Jaakko Hyvätti). - Added PDCDescriptor handling to 'libsi'. - Implemented handling the VPS timestamps (aka "Programme Identification Label") for full VPS support for timers (provided the tv stations actually broadcast this information). The VPS time is displayed in the event info page if it exists and is different than the event's start time. - Extended the SVDRP command LSTE to allow limiting the listed data to a given channel, the present or following events, or events at a given time (thanks to Thomas Heiligenmann). - Fixed a typo in libsi/si.h (thanks to Stéphane Esté-Gracias). - Timers can now be set to use the VPS information to control recording a programme. The new setup options "Recording/Use VPS" and "Recording/VPS margin", as well as the "VPS" option in the individual timers, can be used to control this feature (see MANUAL for details). Note that this feature will certainly need a lot of testing before it can be called "safe"! - The "Schedule" and "What's on now/next?" menus now have an additional column which displays information on whether there is a timer defined for an event, whether an event has a VPS time that's different than its start time, and whether an event is currently running (see MANUAL under "The "Schedule" Menu" for details).
2004-02-08Version 1.3.4vdr-1.3.4Klaus Schmidinger
- Fixed handling language codes in case there is no audio or Dolby PID. - Fixed handling CA ids (was broken in 1.3.3). - Fixed the SVDRP command 'STAT DISK' to avoid a 'division by 0' in case the disk is full (thanks to Jens Rosenboom). - Fixed handling bitmap indexes for 256 color mode (thanks to Andreas Regel). - Now handling "linked services" (based on the 'autopid' patch from Andreas Schultz). Linked channels are detected and added to 'channels.conf', but currently they are not yet presented to the user other than being in the normal channel list (this will come later). - Preliminary fix for the "Unknown picture type error" (thanks to Sascha Volkenandt for his support in debugging this one). This may slow down switching between channels on different transponders for now, but a better solution will come later. - Fixed the validity check for channel IDs, because some providers use TIDs with value 0 (thanks to Thomas Bergwinkl). - Enabled switching to a channel even if it has no Vpid or Apid set, because these might be automatically set when tuned to that transponder. - No longer closing the Channels menu after trying to switch to a channel that is currently not available. - Removed the now obsolete CaCaps stuff. The Setup/CICAM menu now displays the actual CAM type as reported by the CAM. The 'ca.conf' file has been stripped down to the values 0..4.
2004-01-25Version 1.3.3vdr-1.3.3Klaus Schmidinger
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added ISO639LanguageDescriptor to 'libsi'. - Changed the 'languageCode' members in the descriptor classes of 'libsi' to 'char[4]' and setting the 4th byte to 0 for easier handling. - Fixed frequency handling when setting the CA descriptors in cDvbTuner::Action() (thanks to Jan Ekholm for reporting and helping to debug this one). - Now setting CA descriptors even if "Setup/DVB/Update channels" is less than 2. - There can now be up to 32 audio and Dolby PIDs (however, currently still only the first two are used throughout the rest of the program). - The audio and Dolby PIDs in 'channels.conf' now can have an optional language code (see man vdr(5)). Currently this is only stored and not yet used otherwise. - Added a call to cStatus::MsgOsdCurrentItem() to cMenuEditItem::SetValue() (thanks to Martin Hammerschmid).
2004-01-11Version 1.3.1vdr-1.3.1Klaus Schmidinger
- Fixed a lockup in the EPG scanner when no non-primary device was available (thanks to Martin Holst for reporting this one). - Fixed a compiler warning about virtual cConfig::Load() functions (thanks to Lauri Tischler for reporting this one). - Fixed a warning about character comparison in libsi/si.c (thanks to Lauri Tischler for reporting this one). - The new parameter "Update channels" in the "Setup/DVB" menu can be used to control if and how channels will be automatically updated (see MANUAL). This has already been part of the 'autopid' patch by Andreas Schultz and has now been adopted. - Fixed a crash in case there is no DVB hardware present (thanks to Sascha Volkenandt for reporting this one). - Changed calculation of channel ids to make it work for tv stations that use the undefined NID value 0 (thanks to Teemu Rantanen for reporting this one). - Enhanced the SDT filter to handle multi part sections. - Added support for selecting preferred EPG languages (based upon a patch by Teemu Rantanen). - Fixed a 'const' in libsi/si.h (thanks to Marcel Wiesweg). - Fixed the 'su' call in 'runvdr' to make it work on systems that require the user name to appear before the command option (thanks to Robert Huitl). - Fixed testing for matching section filters in case they are turned off (thanks to Marcel Wiesweg). - In case of incomplete sections an error message is now logged only every 10 seconds. - Fixed a possible NULL pointer access in cEITScanner::Process() (thanks to Andreas Kool). - The actual transponder data is now taken from the NIT and existing channels are adjusted if necessary. If the NIT contains new transponders, they are scanned for channels during the next EPG scan. Note that only the satellite branches are tested, cable and terrestrial need to be tested by somebody who actually has such equipment.
2003-10-17Version 1.2.6pre1vdr-1.2.6pre1Klaus Schmidinger
- Updated the required driver version in INSTALL (thanks to Jens Groth for reporting this one). - Fixed missing channel info after an incomplete channel group switch (thanks to Andreas Trauer). - Fixed handling a channels.conf that contains a ":@nnn" line as its last entry (thanks to Ralf Klueber). - Fixed detecting the /dev/videoN devices for GRAB in case there are others before the DVB devices (thanks to Andreas Kool). - Updated 'channels.conf.terr' for Berlin (thanks to Markus Hardt). - Fixed handling rc key learning in case cRemote::Initialize() returns 'false' (thanks to Oliver Endriss). - Fixed initializing the highlight area in cDvbSpuDecoder (thanks to Sven Goethel). - Now trying to get a timer's channel without RID when loading 'timers.conf' (thanks to Thomas Rausch). - Removed the unused 0x73 (TOT) filter in eit.c (thanks to Andreas Trauer). - Fixed extracting the ES data in cDvbDevice::StillPicture() (thanks to Stefan Huelswitt). - Added MPEG1 handling to cDvbDevice::StillPicture() (thanks to Thomas Heiligenmann). - Changed the default "Lifetime" to 99, which means that recordings will never be deleted automatically in case the disk runs full (suggested by Oliver Endriss). Note that in an existing VDR installation the current value as set in 'setup.conf' will still be used - this change only affects new VDR installations. - Edited recordings will now never be deleted automatically if the disk runs full (suggested by Emil Naepflein). - Channel IDs are now checked when reading 'channels.conf' to avoid later problems with timers.
2003-08-26Version 1.2.4 (not officially released)vdr-1.2.4Klaus Schmidinger
- Fixed 'runvdr' to stay in the loop only if VDR returns an exit status of '1'. - Completed the Finnish OSD texts (thanks to Rolf Ahrenberg). - Empty values in setup.conf are no longer treated as an error (thanks to Andreas Kool for reporting this one). - Added a note about the config files of plugins to INSTALL (thanks to Thomas Keil). - VDR now continues to start up, even if there is an error in setup.conf. - Fixed a bug in resetting OSD color palettes (thanks to Torsten Herz). - Fixed starting a recording on the primary device if there is a replay session active (thanks to Javier Marcet for reporting this one). - Avoiding an unnecessary stop of an ongoing Transfer Mode when starting a recording on the primary device.
2003-08-17Version 1.2.3 (not officially released)vdr-1.2.3Klaus Schmidinger
- Fixed the TS to PES repacker so that it works with MPEG1 streams (thanks to Andreas Kool). - Fixed keeping track of the current channel number when moving channels in the "Channels" menu (thanks to Mirko Günther for reporting this one). - Made the plugin library directory configurable via Make.config (thanks to Ludwig Nussel). - Fixed scaling SPU bitmaps in Letterbox mode when playing NTSC material. In order to do this, the cDevice was given a new member function GetVideoSystem(). - Fixed two warnings when compiling with gcc 3.3.1 (thanks to Alfred Zastrow for reporting this). - Made crc32() a static function in libdtv/libsi/si_parser.c to avoid a name clash when using other libraries that also implement a function by that name (thanks to Reinhard Nissl for reporting this one). - Fixed staying off the end of an ongoing recording while replaying in time shift mode (thanks to Rainer Zocholl for reporting this one). - VDR now stops with exit status 2 if one of the configuration files can't be read correctly at program startup (suggested by Rainer Zocholl). - Fixed a crash when starting "Pause live video" twice within the same minute on the same channel. - Fixed freezing replay if a timer starts while in Transfer Mode from the device used by the timer, and the timer needs a different transponder (thanks to Richard Robson for reporting this one). - Fixed toggling channels with the '0' key (thanks to Mirko Günther for reporting this one). - Made the "Zap timeout" (the time until a channel counts as "previous" for switching with '0') a setup variable, available in "Setup/Miscellaneous" (suggested by Helmut Auer). - Removing deleted recordings faster than normal when cutting, to avoid running out of disk space (thanks to Manfred Schmidt-Voigt for reporting this one).
2003-05-11Version 1.1.31vdr-1.1.31Klaus Schmidinger
- Introduced the new function cPlugin::Initialize(), in order to be able to separate the startup of a plugin into an "early" (Initialize()) and "late" (Start()) phase (suggested by Andreas Schultz). Plugin authors should please read the section about "Getting started" in PLUGINS.html and adapt their code if applicable. - Implemented the CableDeliverySystemDescriptor and TerrestrialDeliverySystemDescriptor in libdtv (thanks to Sven Grothklags and Andreas Schultz). - Fixed keeping live video active in case the primary device doesn't have an MPEG decoder (thanks to Wolfgang Goeller for reporting this one). - Implemented cDevice::ActualDevice(), which returns the actual receiving device in case of 'Transfer Mode', or the primary device otherwise. This may be useful for plugins that want to attach a cReceiver to the device where the current live video is actually coming from. - Added VDRVERSNUM to config.h, which can be used by the preprocessor to check the actual VDR version (suggested by Stefan Huelswitt). - Removed the WaitForPut/WaitForGet stuff from cRingBuffer, since it appears to no longer be necessary due to the implementation of cNonBlockingFileReader in dvbplayer.c. Also, the long timeout in WaitForPut caused problems with cReceivers that use a ring buffer and didn't immediately return from their Receive() function if the buffer runs full (thanks to Sascha Volkenandt for reporting this one). - Fixed handling EPG data where the "extended event descriptor" comes before the "short event" or a "time shifted event" (thanks to Jonan Santiago). - Disabled the "Received stuffing section in EIT" log message. - Updated 'channels.conf.terr' for Berlin (thanks to Juri Haberland). - Avoiding short display of the "Main" menu when pressing the "Recordings" button or the "Back" button during replay. - Further increased the timeout until an index file is considerd no longer to be written. - Implemented separate PausePriority and PauseLifetime parameters for the recordings created when pausing live video (suggested by Alfred Zastrow). - Changed C++ style comments in libdtv into C style to avoid warnings in gcc 3.x (thanks to Andreas Schultz).
2003-04-13Version 1.1.27vdr-1.1.27Klaus Schmidinger
- The CAM is now accessed only if the current channel actually has a non-zero Ca value, and CAM access is completely suppressed during replay, which avoids problems in case the CAM is attached to the primary DVB device. - The "Left" and "Right" buttons now set the cursor to the first or last list item even if the list consist only of a single page, like, for instance, the Main menu (thanks to Oliver Endriss). - Made the log message "OSD window width must be a multiple of 4..." a debug message instead of an error message, so it can be avoided by using a log level less than 3. - Updated Greek language texts (thanks to Dimitrios Dimitrakos). - Fixed faulty behaviour of the "Mute" key in case the channel display is visible (thanks to Florian Bartels for reporting this one and Sascha Volkenandt for helping to fix it). - Modified LOF handling to allow for C-band reception (thanks to Malcolm Caldwell). - Added some missing cAudio handling calls (thanks to Werner Fink). - Replaced the 'for' loops in StripAudioPackets() with memset() calls (thanks to Werner Fink). - Further increased the timeout until an index file is considerd no longer to be written. - Fixed a crash in case the index file can't be accessed any more during replay (thanks to Stefan Huelswitt for reporting this one). - Fixed displaying messages in the status line in case they exceed the OSD width (thanks to Gerhard Steiner for reporting this one). - Avoiding high CPU load in case the connection to LIRC gets lost (thanks to Ludwig Nussel). - Fixed handling repeat function with LIRC (thanks to Ludwig Nussel). - Fixed handling min/max borders when entering integer values (thanks to Andy Grobb for reporting this one). - Implemented a "resume ID" which allows several users to each have their own resume.vdr files (thanks to Martin Hammerschmid). This parameter can be set in the "Setup/Replay" menu (see MANUAL for details). - Now using 'libdtv' version 0.0.5 (thanks to Rolf Hakenes for the new version and Stefan Huelswitt for adapting VDR to it). - If no device with an MPEG decoder can be found at startup, the first device is now used as primary device (just to have some device). - Adjusted some Premiere channels in 'channels.conf' (thanks to Thomas Koch). - Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt). - The 'epg.data' file is now read after all plugins have been started (thanks to Sascha Volkenandt). - The LIRC remote control no longer tries to learn keys if it can't connect to the LIRC daemon (thanks to Ludwig Nussel for reporting this one). The same applies to the RCU remote control in case of errors during startup. - Fixed handling of Ca parameters with values <= MAXDEVICES, which don't indicate an actual encrypted channel (thanks to Stefan Huelswitt for reporting this one).
2002-11-03Version 1.1.15vdr-1.1.15Klaus Schmidinger
- Completely switched to the new CVS HEAD version of the linux-dvb driver. The NEWSTRUCT compile time switch is now obsolete. The required driver is now the CVS HEAD version dated 2002-11-01 or later. - Adjusted the INSTALL file to the 1.1.x version. - Only accepting key presses from the current remote control when learning (thanks to Oliver Endriss). - Fixed the EPG scanner, which broke 'Transfer Mode' as soon as it kicked in (thanks to Oliver Endriss for reporting this one). - Fixed handling audio tracks in cDvbDevice. - Updated channels.conf.terr (thanks to Uwe Scheffler). - Fixed displaying the group separators in the channel display (thanks to Martin Hammerschmid for pointing out this one). - The Makefile now includes the file Make.config (if present in the VDR source directory), which allows the user to overwrite several settings with individual values (suggested by Andreas Schultz). The VDR distribution archive does not contain this file in order to not overwrite a user defined file. There is a Make.config.template which contains the default values of the macros the user can overwrite. - Since there have been changes to the 'newplugin' script authors of plugins may want to newly create their plugins' Makefiles with the new version of this script, and adapt them to their individual needs (make sure you don't overwrite your existing plugin directory - make a backup copy first!). - Fixed reading EPG data via the SVDRP command PUTE (it changed the current service ID). - Fixed closing all dup'ed file descriptors in cPipe. - Implemented a plugin interface for additional audio processing (see PLUGINS.html under "Dolby Digital"). The functionality of the '-a' command line option has been reactivated. Since the author doesn't have any Dolby Digital equipment this may or may not work as expected. There may still be some places where a call to cAudios::Clear() or cAudios::Mute() is necessary. Those with Dolby Digital equipment should please take a look at this and maybe send patches. Replaying Dolby Digital in ways other than through VDR's '-a' option will have to be implemented as plugins. Those who have written patches for VDR version 1.0.x should convert their work into the proper plugins for version 1.1.x. Note to authors of cPlayer derived plugins: please read the modified comments in device.h regarding the member functions cDevice::Clear(), cDevice::Mute() and cDevice::PlayAudio(). Derived classes must call these base class member functions to make sure all registered cAudio objects are properly handled. Also note that the return type of cDevice::PlayAudio() has been changed to 'void', since this function always has to accept the entire data block immediately and there is nothing that could be reasonably done in case an error occurs in one of the cAudio objects. - Now checking the driver's DVB_API_VERSION in dvbdevice.h. Since VDR now requires a driver dated 2002-11-01 or later the MIN_DVB_DRIVER_VERSION_FOR_TIMESHIFT and DVB_DRIVER_VERSION stuff has been replaced with DO_REC_AND_PLAY_ON_PRIMARY_DEVICE, which can be used to disable simultaneous recording and replaying on the primary DVB device in case there are problems with this.
2002-10-27Version 1.1.14vdr-1.1.14Klaus Schmidinger
- Fixed some faulty default parameter initializations (thanks to Robert Schiele). - Added further satellites to 'sources.conf' (thanks to Reinhard Walter Buchner and Oliver Endriss). - Updated Finnish OSD texts (thanks to Jaakko Hyvätti). - Fixed a small glitch when switching channels (thanks to Dennis Noordsij for reporting this one). - Fixed handling multiple 'CaCaps' entries in 'setup.conf'. - Group separators in 'channels.conf' may now be given like ':@201 My Channels', where '@201' indicates the number to be given to the next channel. This can be used to create 'gaps' in the channel numbering (see 'man 5 vdr'). BE CAREFUL TO UPDATE YOUR 'timers.conf' ACCORDINGLY IF INSERTING THIS NEW FEATURE INTO YOUR 'channels.conf' FILE! - Timers now internally have a pointer to their channel (this is necessary to handle gaps in channel numbers, and in preparation for unique channel ids). - Fixed slow reaction on SVDRP input (thanks to Guido Fiala for reporting this one). - Added KI.KA to channels.conf.cable (thanks to Robert Schiele). - Frequency values for cable and terrestrial channels in 'channels.conf' can now be given either in MHz, kHz or Hz. The actual value given will be multiplied by 1000 until it is larger than 1000000. - Fixed skipping unavailable channels when zapping downwards. - Fixed checking the Ca() status of a cDevice (thanks to Stefan Huelswitt). - Fixed switching audio tracks in 'Transfer Mode' on the primary DVB device (thanks to Steffen Barszus and Stefan Huelswitt for reporting this one and helping to fix it). - Fixed channel switching in case of an active 'Transfer Mode' on the primary device ('Transfer Mode' is now launched with priority '-1'). - Fixed a ternary expression in dvbspu.c. - Fixed handling 'Transfer Mode' on single device systems when recording an encrypted channel (thanks to Stefan Huelswitt). - Fixed blocking replaying in case an encrypted channel is being recorded on the primary device. - Now the name of the remote control is displayed when learning the keys. - Fixed learning remote control keys in case there is more than one remote control (thanks to Oliver Endriss for reporting this one). - Implemented additional dedicated keys for "Play", "Pause", "Stop", "Record", "FastFwd", "FastRew", "Channel+" and "Channel-". If your remote control supports any of these keys you can delete your 'remote.conf' file and restart VDR to go through the key learning procedure again in order to assign these new keys. See MANUAL for more information. Authors of player plugins should update their ProcessKey() functions so that the new player keys have the same functionality as the "Up", "Down", "Left", "Right" and "Blue" keys, respectively. Note that the existing functionality of these keys should by all means be retained, since VDR (and any plugins) shall be fully usable with just the basic set of keys. These new keys are only for additional comfort in case the remote control in use supports them. - Implemented new keys to directly access the VDR main menu functions "Schedule", "Channels", "Timers", "Recordings", "Setup" and "Commands". If your remote control provides keys you want to assign these functions to, you can delete your 'remote.cof' file and restart VDR to go through the key learning procedure again in order to assign these new keys. See MANUAL for more information. - The new configuration file 'keymacros.conf' can be used to assign macros to the color buttons in normal viewing mode, as well as to up to 9 user defined keys. See MANUAL and man vdr(5) for more information. The default 'keymacros.conf' implements the functionality of the "color button patch". - Fixed a crash when learning the keys of several remote controls and pressing buttons of those that have already been learned (thanks to Oliver Endriss for reporting this one).
2002-10-13Version 1.1.13vdr-1.1.13Klaus Schmidinger
- Added cDevice::DeviceNumber() to get the number of a device, not counting any gaps that might be in the index count. - Fixed fetching the current/next information to handle cases where the duration of an event is set wrongly and would last beyond the start time of the next event. - Adapted type names to the new HEAD version of the driver (which the previous NEWSTRUCT branch has been merged into). Note that to use this driver version you still need to add NEWSTRUCT=1 to the make call when building VDR. You need a HEAD version of the LinuxDVB driver dated 2002-10-11 or later to compile VDR with NEWSTRUCT=1. - Fixed radio channels in channels.conf.cable (thanks to Robert Schiele and Uwe Scheffler). - Fixed switching the video format in the Setup/DVB menu (thanks to Uwe Scheffler for reporting this one). - Reactivated full handling of second audio PID (even in 'Transfer Mode'). - Fixed a crash when closing down with remote control plugins (thanks to Oliver Endriss helping to debug this one). - Commands in the file 'commands.conf' can now have a '?' at the end of their title, which will result in a confirmation prompt before executing the command. - Changed a few leftover 'new char[...]' to MALLOC(char, ...). - If a command executed from the "Commands" menu doesn't return any output, the OSD will now be closed automatically. - The SVDRP command PUTE now triggers an immediate write of the 'epg.data' file (suggested by Gerhard Steiner). - The new configuration file 'reccmds.conf' can be used to define commands that shall be executed from the "Recordings" menu; see MANUAL and 'man vdr(5)' for details (suggested by Gerhard Steiner).
2002-10-06Version 1.1.12vdr-1.1.12Klaus Schmidinger
- Fixed a missing Flush() call in the remote control learning procedure (thanks to Oliver Endriss). - Modified channel handling to cover all parameters necessary for DVB-C and DVB-T (see man vdr(5) for the meaning of the additional parameters stored in the field previously named 'polarisation'). Thanks to Uwe Scheffler and Andy Carter for testing. If you have a system with different kinds of DVB cards, like DVB-T and DVB-C, for instance, there is no more need to distinguish the channels through the 'Ca' parameter in order to assign them to the various DVB cards. This is now taken care of by the "source" parameter. So a channel marked as "terrestrial", for example, will only be received on DVB-T cards. Note that the cChannel class has been moved into a separate file (channels.[ch]), and that all data members have been made private and are now only accessible through member functions. You may have to change any plugin code that accesses cChannel data accordingly. - The new configuration file 'sources.conf' contains the various signal sources (satellites, cable and terrestrial) which are used in 'channels.conf' and 'diseqc.conf' (thanks to Reinhard Walter Buchner for adding some satellites to 'sources.conf' and Oliver Endriss and Lauri Tischler for testing and debugging). - The 'diseqc' parameter in the channel definitions has been redefined to hold the "source" of the given channel (which can be either a satellite, cable or terrestrial). For compatibility with channels.conf files from older versions, numeric values in this parameter will be tolerated, but they have no meaning. If you want to use DiSEqC you will need to replace these old values with the proper source identifiers defined in the new configuration file 'sources.conf'. See how this is done in the 'channels.conf' file that comes with the VDR package. - The new configuration file 'diseqc.conf' can be used to set up the individual diseqc configuration (see man vdr(5) for a description of the file format). - The "Edit channel" menu has a new entry "Source:" in which the source of this channel can be selected (either a satellite, cable or terrestrial). The set of parameters at the end of this menu will change according to the type of source. - The "Use DiSEqC" parameter in the "Setup/LNB" menu has been moved to the beginning of the list and disables the rest of the parameters when set to "yes", since these are now only meaningful if DiSEqC is _not_ used. - Removed some unnecessary #includes from eit.c and changed cMenuRecordings::Del() to cMenuRecordings::Delete() to avoid warnings in gcc-3.2 (thanks to Andreas Schultz for pointing this out). - Improved skipping channels that are (currently) not available (thanks to Stefan Huelswitt). - Updated channels.conf.terr and channels.conf.cable (thanks to Uwe Scheffler). - Fixed a bug when pressing the "Blue" button in the main menu without having displayed it (thanks to Oliver Endriss for reporting this one).
2002-09-29Version 1.1.11vdr-1.1.11Klaus Schmidinger
- Fixed an incomplete initialization of the filter parameters in eit.c (thanks to Jeremy Hall). - Fixed the 'newplugin' script for use with the NEWSTRUCT driver (thanks to Andreas Schultz for reporting this one). If you have already created a plugin directory and Makefile with 'newplugin', please apply the following patch to it: ------------------------------------------------------- --- Makefile 2002/06/10 16:24:06 1.4 +++ Makefile 2002/09/17 15:36:36 1.5 @@ -15,7 +15,12 @@ ### The directory environment: +ifdef NEWSTRUCT +DVBDIR = ../../../../DVB/include +DEFINES += -DNEWSTRUCT +else DVBDIR = ../../../../DVB/ost/include +endif VDRDIR = ../../.. VDRINC = $(VDRDIR)/include LIBDIR = ../../lib @@ -34,7 +39,7 @@ INCLUDES = -I$(VDRINC) -I$(DVBDIR) -DEFINES = -DPLUGIN_NAME_I18N='"$(PLUGIN)"' +DEFINES += -DPLUGIN_NAME_I18N='"$(PLUGIN)"' ### The object files (add further files here): ------------------------------------------------------- This is the diff for the 'setup' example that comes with VDR, so your line numbers may be different. - Added a missing 'public' keyword in device.h (thanks to Martin Hammerschmid). - Fixed a race condition when starting 'Transfer Mode'. - Rearranged the remote control key handling to allow plugins to implement additional types of remote controls (see PLUGINS.html, section "Remote Control"). The previously used files 'keys.conf' and 'keys-pc.conf' have been replaced by the file 'remote.conf', which holds the key definitions of all remote controls. - The LIRC remote control keys are now handled just like the keyboard and RCU keys. This means that you can use the lircd.conf file as is for your remote control, without the need of editing it to make the key names the same as used in VDR. When first starting VDR it will go into the "Learning keys" mode and ask you to press the various keys. The resulting key assignment will be stored in the file 'remote.conf'. Since I have no way of testing the LIRC support, I hope I didn't break it in the process... - While learning the remote control keys it is now possible to press the 'Menu' key to skip the definition of keys that are not available on your particular RC unit. - Fixed handling DVD subtitles in the SPU decoder (thanks to Andreas Schultz). - Avoiding restarts due to 'panic level' when switching channels on the primary device during EPG scan.
2002-09-08Version 1.1.9vdr-1.1.9Klaus Schmidinger
- Fixed the 'newplugin' script to make it name the target for creating the distribution package 'dist', as stated in the PLUGINS.html documentation. If you have already created a plugin source directory and Makefile you may want to check it and replace the 'package' target with 'dist' if necessary. - Changed device handling for being able to do simultaneous recording and replay on the same device (Time Shifting). In order for this to work you need to use a driver with a firmware version that has this feature implemented. - cDevice::ProvidesCa() is no longer virtual. The new function cDevice::ProvidesChannel() is now used to determine whether a device can receive a given channel, and by default this function returns false. So a device that is a pure replaying device doesn't need to do anything here. - Increased the recorder buffer size to 5MB in order to be able to better handle multiple recordings. - Implemented cTSBuffer for better handling TS packet buffering in derived cDevice classes. - Changed the interface if cDevice::GetTSPacket() to avoid unnecessary copying of data. - Removed cDevice::Channel(), since this makes no more sense with devices receiving multiple channels. - Switching through channels with the 'Up' and 'Down' keys now skips channels that are currently not available (for instance because all devices are recording and these channels are on different transponders). - Implemented an SPU decoder (thanks to Andreas Schultz). - Fixed a crash when entering an integer value outside the limits (thanks to Stefan Huelswitt for reporting this one). - Added play mode pmAudioOnlyBlack (thanks to Stefan Huelswitt).
2002-08-16Version 1.1.7vdr-1.1.7Klaus Schmidinger
- Adapted VDR to the NEWSTRUCT driver. To use the new driver, compile VDR with 'make NEWSTRUCT=1' (thanks to Holger Wächtler for some valuable advice). By default it currently still uses the old driver. - Added some missing #includes (thanks to Martin Hammerschmid). - Changed the log error message "can't record MPEG1!" to "error in data stream!", since the mentioning of MPEG1 has irritated many people. - Consistently using malloc/free and new/delete (thanks to Andreas Schultz). - Temporarily made cDevice::ProvidesCa() virtual (Andreas Schultz needs this in his DXR3 plugin). - cDevice no longer exposes a file handle to cPlayer. A derived cPlayer class can now call DevicePoll() to see whether the replay device is ready for further data. A derived cDevice class must implement Poll() and shall check if any of its file handles is ready for data. - Implemented several replay modes to allow players that play only audio (thanks to Stefan Huelswitt). - Improved cCondVar::Wait() and implemented cCondVar::TimedWait() (thanks to Stefan Huelswitt). - VDR no longer gives up if there is no DVB device. It continues to work if there is at least one device, either a DVB device found by the core VDR code itself, or a device implemented by a plugin.
2002-08-04Version 1.1.6vdr-1.1.6Klaus Schmidinger
- Re-visited the race condition fix in the cDvbPlayer (thanks again to Andreas Schultz). - Changed the VFAT handling to allow users who normally use it but have forgotten to set it when compiling a new version of VDR to at least see their recordings made with VFAT enabled (thanks to Christian Rienecker). - Added some missing teletext PIDs (thanks to Joerg Riechardt). - Fixed PID handling for cReceiver. - Added a missing #include to ringbuffer.c (thanks to Martin Hammerschmid). - Now using CC, CFLAGS, CXX and CXXFLAGS in Makefile. - Changed the cDevice class to allow plugins to implement their own devices (see PLUGINS.html for details).
2002-06-16Version 1.1.3vdr-1.1.3Klaus Schmidinger
- Improved the VDR Makefile to avoid a warning if the '.dependencies' file does not exist, and also using $(MAKE) to call recursive makes. - Changed the name of the 'package' target in the plugin Makefiles to 'dist' (following the suggestions in the "GNU Make" manual). If you already have started a plugin project, you may want to change this in your Makefile accordingly. - Improved the plugin Makefile to avoid a warning if the '.dependencies' file does not exist, and also using $(shell...) to get the version numbers. If you already have started a plugin project, you may want to change this in your Makefile accordingly. - Fixed some function headers to make them compile with gcc 3.x (thanks to Gregoire Favre). - Fixed the cutting mechanism to make it re-sync in case a frame is larger than the buffer (thanks to Sven Grothklags). - Added an error message if the directory specified in the '-L' option can't be accessed (suggested by Stefan Huelswitt). - Rearranged OSD class names to make 'cOsd' available for the main OSD interface. - Completely moved OSD handling out of the cDvbApi class, into the new cOsd. - Implemented cStatus to allow plugins to set up a status monitor. See PLUGINS.html for details. - Moved the cEITScanner out of dvbapi.h/.c, into the new eitscan.h/.c. - Added Swedish language texts (thanks to Tomas Prybil). - Fixed parsing 'E' records in epg2html.pl (thanks to Matthias Fechner for pointing out this one). - Removed compiler option '-m486' to make it work on non-Intel platforms. If you have already started a plugin project, you may want to make sure you remove this option from your existing Makefile. - Completely rearranged the recording and replay functions to make them available to plugins. - Replay is now done in a single thread (no more syncing between input and output thread necessary). - It is now possible to record several channels on the same transponder with "budget cards". VDR automatically attaches a recording timer to a card that already records on the appropriate transponder. How many parallel recordings can actually be done depends on the computer's performance. Currently any number of recordings gets attached to a card, so you should carefully plan your timers to not exceed the limit. On a K6-II/450 it was possible to record three channels from transponder 12480 with a single WinTV NOVA-S. - Timers that record two successive shows on the same channel may now overlap and will use the same DVB card. During the time where both timers record the data is simply saved to both files. - The following limitations apply to this version: + Transfer mode doesn't work yet. + The '-a' option (for Dolby Digital audio) doesn't work yet. + Switching between different language tracks doesn't work yet. + Cutting doesn't work yet.
2002-05-13Version 1.1.2vdr-1.1.2Klaus Schmidinger
- Changed the cPlugin::Start() function to return a boolean value that indicates if the plugin will not be able to perform its task (suggested by Stefan Huelswitt). - Added the cPlugin::Housekeeping() function (suggested by Stefan Huelswitt). - Updated channels.conf.cable (thanks to Uwe Scheffler). - Added 'insert' capabilities to cList (suggested by Stefan Huelswitt). - Changed the 'package' target in the plugin's Makefile to produce a package that expands to a directory with just the plugin name and version number (suggested by Stefan Huelswitt). - Made the config directory available to plugins (suggested by Stefan Huelswitt). See PLUGINS.html, section "Configuration files" for details. - Improved the [eid]syslog() macros, so that the LOG_... macros don't need to be given any more.
2002-05-11Version 1.1.1vdr-1.1.1Klaus Schmidinger
- Separated the actual DVB hardware OSD implementation from the abstract OSD interface. 'osdbase.c/.h' now implements the abstract OSD, while 'dvbosd.c/.h' is the actual implementation for the DVB hardware. This is in preparation for allowing additional kinds of OSD hardware implementations. - Fixed leftover references to the file FORMATS in MANUAL and svdrp.c. - Avoiding ambiguities in the cList template class in case one defines a "list of lists" (thanks to Stefan Huelswitt). - Simplified the basic cMenuSetupPage class for easier use in plugins. - Added setup parameters and a Setup menu to the 'hello' plugin example. - Fixed logging error message for unknown config parameters in plugins. - Rearranged cleanup sequence at the end of the main program. - Adapted PLUGINS.html to use the actual code examples from the 'hello' plugin.
2002-05-09Version 1.1.0vdr-1.1.0Klaus Schmidinger
- Begin of the 1.1 development branch. THIS IS NOT A STABLE VERSION! The current stable version for every day use is still the 1.0 branch. - First step towards a universal plugin interface. See the file PLUGINS.html for a detailed description. The man page vdr(1) describes the new options '-L' and '-P' used to load plugins. This first step implements the complete "outer" shell for plugins. The "inner" access to VDR data structures will follow. - The VDR version number is now displayed in the title line of the "Setup" menu.
2002-04-07Version 1.0.0vdr-1.0.0Klaus Schmidinger
- Fixed a problem with wrong EPG data in the Schedules menu (thanks to Tobias Kerner, problem was initially reported by Michel Moster, but somehow I had misplaced his message...). - Added Spanish language texts (thanks to Ruben Nunez Francisco). - Fixed resetting the "First day" timer parameter once the timer actually starts recording. - Fixed the still picture workaround in case the progress display is active (thanks to Gerald Raaf). - Fixed a problem with accessing the epg.data file before it is fully written (thanks to Thilo Wunderlich for reporting this one). - Now the EPG scan skips channels that have their 'Ca' parameter explicitly set to an other DVB card (suggested by Sergei Haller). - Fixed a possible hangup when reading a broken epg.data file (thanks to Henning Holtschneider for pointing this one out). - Fixed a bug in the editing process in case a previously edited file with the same name was manually deleted on a system with more than one video directory (thanks to Dirk Wiebel for reporting this one).
2002-04-01Version 1.0.0pre5vdr-1.0.0pre5Klaus Schmidinger
- Fixed restoring CICAM setup values for a fourth DVB card (thanks to Klaus Wolf). - Completed internationalization of OSD texts (thanks to Hannu Savolainen, Arnold Niessen, Paulo Lopes, Jean-Claude Repetto, Alberto Carraro, Matjaz Thaler and Truls Slevigen). - Improved file I/O in case of EINTR, which may occur e.g. with heavy system load (thanks to Werner Fink). - Now writing the title of a recording into the 'summary.vdr' file. - Workaround for displaying still frames with the unpatched LinuxDVB driver (if anybody ever finds out why the unpatched driver doesn't display VDR's still frames, please let me know). - When executing a command from the "Commands" menu, the title of that command is now immediately shown in the status line (followed by "...") to give the user some feedback that the command is being executed, which is especially important if this takes some time. - Fixed scrolling the "Channels" menu in case the cursor ends up on a group delimiter (thanks to Bernd Zierath for helping to debug this one). - Added manual pages vdr(1) and vdr(5) (which made the FORMATS file obsolete). - New command command line option '-V' to display the VDR version. - Adjusting column width for channel numbers in case there are more than 999 channels. - Checking the return value of '...FileRady...' calls in dvbapi.c for better performance under heavy system load. - New 'make' target 'install', which copies the manual pages and executables to their appropriate system locations and creates the /video directory if it doesn't exist yet. - Automatic hotkey assignment is now suppressed if the first entry in commands.conf starts with a digit in the range '1'...'9', followed by a blank. - Fixed a bug in switching back the replay mode display in time shift mode (thanks to Achim Lange for reporting this one). - Fixed a bug in the 'First day' timer parameter for timers that record over midnight. - Added units to Setup parameters. - Changed time entry in the 'Jump' command during replay, so that it is filled up from right to left. - Now using statfs() to determine the amount of free disk space, which avoids the use of an external 'df' command (thanks to Ruben Nunez Francisco). - Fixed skipping the next hit of a repeating timer (thanks to Rainer Zocholl for reporting this one). - Fixed a bug when a timer records over midnight of a day that had a change in Daylight Saving Time. - Added Polish language texts (thanks to Michael Rakowski). - Fixed a bug in parsing group separators in channels.conf (thanks to Henning Holtschneider for reporting this one). - Changed the default 'Ok' key when using the PC keyboard from '5' (in the numeric block) to 'Enter', because the '5' key didn't work on keyboards with the F-keys on top. - Fixed a bug in the EPG bugfix mechanism if the extended description is shorter than 3 characters (thanks to Andreas Schultz).
2002-03-17Version 1.0.0pre4vdr-1.0.0pre4Klaus Schmidinger
- Added 'Ca' code 201 for 'Cryptoworks, GOD-DIGITAL' to 'ca.conf' (thanks to Bernd Schweikert). - Fixed avoiding the primary DVB interface in case Setup.PrimaryLimit is 0. - Fixed handling CICAM settings if the first one of a DVB card was FTA. - Fixed reacting on changes in CICAM settings (needed to restart VDR before). - The "Blue" button in the "Main" menu now works as "Stop" button if a recording is currently being replayed. - New command line option '-m' to mute audio of the primary DVB device at startup (suggested by Mirko Günther). - The new SVDRP command VOLU can be used to control the audio volume (suggested by Mirko Günther). - Fixed resetting 'mute' state when setting the volume to a non-zero value. - Added log messages when deleting recordings in case the disk runs full while recording. - Fixed closing a pipe (used for replaying Dolby Digital audio), which sometimes left 'zombie' processes behind (thanks to Werner Fink for helping to debug this one). - Now starting the Dolby Digital output thread only if the recording actually contains Dolby Digital audio data (thanks to Werner Fink). - Implemented OSD for Volume and Mute (works only if there is no other OSD activity, but this should be no problem for normal use). - Changed the MANUAL description of the "Conditional Access" setup parameters to reflect the actual "CICAM DVBn m" notation in the "Setup" menu. - The new Setup parameter "Use time from transponder" can be used to define which transponder shall be used to set the system time (see MANUAL for details). If you have been using the SetSystemTime option previously, you now MUST select a channel that you trust to have a reliable time base. - Grouped the Setup parameters into several sub-menus, so that each group of parameters fits on a single screen - unless the height of the OSD has been set to a small value (based on code from Markus Lang). - Changed the title of the "Main" menu to "VDR". - Fixed displaying a system message while the replay mode is being shown. - Physically removing a deleted recording if one with the same name shall be deleted again. - The "Left" and "Right" keys are now used to page up and down in text displays (like the EPG descriptions or the results of commands executed from the "Commands" menu). - Fixed high CPU usage in transfer mode. - Replaced 'killproc' with 'killall' in 'runvdr', since apparently 'killproc' is not available by default on some Linux distributions, whereas 'killall' is. Please check if your system provides 'killall' - if it doesn't, please change this back in 'runvdr' and report this (thanks to Achim Lange). - The "Commands" menu now automatically assigns number keys as hotkeys to the commands. If you have preceeded your commands with digits you may want to remove these from your 'commands.conf' file. - The new Setup item "Restart" can be used to force a complete restart of VDR, including reloading the driver. Note that this can only work if VDR and the driver are wrapped into a mechanism that actually performs this action if VDR exits. The 'runvdr' script can be used for this purpose. - Refined texts of the "Setup" menu.
2002-03-03Version 1.0.0pre3vdr-1.0.0pre3Klaus Schmidinger
- Fixed parsing 'E' records in epg2html.pl. - Fixed a deadlock when switching channels via Schedule/Now|Next/Switch (reported by Martin Hammerschmid). - Changed the meaning of the 'Ca' parameter in 'channels.conf'. Each channel can now define which decryption method it needs in order to be accessed. The new configuration file 'ca.conf' contains the defined values, and the default 'channels.conf' has been modifed to contain the new values for 'Premiere World' and 'ORF'. If you use the default 'channels.conf' and have the conditional access hardware to receive encrypted channels, please make sure you copy the file 'ca.conf' into your /video directory (or wherever your configuration files are located) and go into the "Setup" menu and set the CICAM values according to your hardware setup. Currently there are two possible CICAM entries per DVB card, so any card can implement up to two different conditional access modes (besides the default "Free To Air" mode, which is always assumed to be available on any DVB card). - Updated French language texts (thanks to Jean-Claude Repetto).
2002-02-24Version 1.0.0pre1vdr-1.0.0pre1Klaus Schmidinger
- Added scanning for EPG data for another 4 days on channels that support this (thanks to Oleg Assovski). - Removed '#define VFAT 1' from recording.c (was a leftover from testing). - Fixed the "Low disk space!" message (thanks to Sergei Haller). - Added the TPID to Hessen-3 in 'channels.conf' (thanks to Sergei Haller). - Fixed a crash when replaying with DEBUG_OSD=1 (thanks to Stefan Huelswitt). - Implemented the "First day" parameter for repeating timers. See FORMATS for information about the enhanced 'timers.conf' file format, and MANUAL for a description of the new item in the "Edit Timer" menu and the enhanced functionality of the "Blue" button in the "Timers" menu. - When deleting a recording that is currently still being recorded, the related timer will now automatically be terminated. If this is a repeating timer, it will receive a "First day" setting that skips the timer for this day. - Fixed closing all unused file descriptors when opening a pipe (thanks to Werner Fink). - Instant recordings now take the EPG data from the point in time at 5 minutes from the start time of the recording. In order for this to work the 'active' parameter of a timer now uses the second bit to indicate that this is an "instant" recording (see FORMATS for details). - Fixed the SVDRP GRAB command in case the video device can't be opened (thanks to Adrian Stabiszewski). - At startup the data written into 'epg.data' is now read into the EPG data structures. In order for this to work, the 'E' record has been extended to (optionally) contain the 'table ID' (see FORMATS for details). - The new SVDRP command PUTE can be used to put EPG data into the EPG list. See FORMATS for details about the required data format. - Taking the German umlauts 'as is' when compiled with VFAT. - The new Setup parameter RecordDolbyDigital can be used to generally turn off recording the Dolby Digital audio channels in case you want to save disk space or don't have the equipment to replay Dolby Digital audio. - Reading the 'setup.conf' file no longer terminates in case of an error, but rather attempts to read the rest of the file. - Removed DVD support from the core VDR source, since the current version from Andreas Schultz is already much further developed (DVD menu navigation) and the concept of "additional players" in VDR is going to change in version 1.1.0, where a new "plugin" interface shall allow the easy implementation of new players without having to patch the core VDR source. Until then, Andreas has agreed to provide his DVD support as a completely external patch. - The contents of the distribution archive now contains the directory name with the current version number, as in 'vdr-1.0.0pre1/...' in order to avoid inadvertently overwriting an existing VDR directory with a new version. - Added a missing error message in SVDRP command LSTC in case the given channel can't be found.
2002-02-10Version 0.99vdr-0.99Klaus Schmidinger
- Fixed a bug in moving timers or channels to the last position in the list (thanks to Matthias Schniedermeyer for helping to debug this one). - Changed the estimated data rate for calculating the remaining disk capacity to 25.75 MB/min. - Only reporting the 'EPG bugfix statistics' if there really were any fixes. - Added Finnish language texts (thanks to Hannu Savolainen). - Reverted to the previous way of searching for the EPG record of the current recording in case of a periodic timer (i.e. taking the one that is in the middle between start and end time). - Added a typedef for 'in_addr_t' to make it work with glibc < 2.2 (thanks to Jürgen Schmidt). - When the last entry in a "Recordings" menu page is deleted, that page is now automatically closed (suggested by Uwe Freese). - Changed the default name for instant recordings to "TITLE EPISODE" (avoiding the '-'). - If Setup.ShowInfoOnChSwitch is set to "no", the box for the EPG display is no longer shown (thanks to Andy Grobb). - If compiled with VFAT=1, characters that can't be handled by a VFAT system are now encoded to '#XX'. - When the user presses the "Power" button and there is a timer about to start recording within Setup.MinEventTimeout minutes, there is now a confirmation prompt telling the user that there is an upcoming timer event. - If a recording has no episode title, the trailing '~' is no longer shown in the progress display.
2002-02-03Version 0.99pre5vdr-0.99pre5Klaus Schmidinger
- Updated channel settings for 'N24' (thanks to Andreas Gebel). - Fixed handling hierarchical recordings menu in case of directories starting with the same sequence of characters. - Fixed handling timers on the 29th, 30th or 31st of a month in case the next month has less than 31 days. - Added a description of the sort order of individual episodes in the recordings menu to the MANUAL. - Removed the EPG bugfix for "Title / Subtitle" cleanup. Apparently Pro-7 has finally stopped this nasty habit. - Added some EPG bugfix statistics (printed to the log file every time the EPG data is cleaned up and when VDR is terminated). Maybe somebody in charge of the EPG data at the listed channels will read this and take the necessary actions to fix these things... - Changed the [dei]syslog macros in tools.h to use a variable number of args, thus making it safe to use them in nested 'if/else' statements. - Fixed error handling in establishing an SVDRP connection (thanks to Davide Achilli) for pointing this out). - The new configuration file 'svdrphosts.conf' is now used to define which hosts may access the SVDRP port (by default only 'localhost' has access). See FORMATS for details. - The special keywords TITLE and EPISODE can now be used in timer file names (see MANUAL and FORMATS for details). - The new setup parameter NameInstantRecord can be used to define how an instant recording will be named (see MANUAL for details). - When looking for the EPG record of the timer that starts a recording, now that record is taken which covers the time calculated as 'start + (Setup.MarginStart * 2) + 1)' in order to have a better chance of hitting the right record in case of an instant recording. Timers that start further in the future should always be programmed via the "Schedules" menu. - The special VPIDs '0' and '1' are now used to enable recording radio channels. Actually '0' should be enough, but '1' must be used with encrypted channels (driver bug?). Note, though, that since VDR is mainly a *video recorder*, some features like, e. g., the progress display, may not work as expected with radio recordings. Thanks to Michael Paar. - Fixed a problem with the ERR macro defined by ncurses.h (thanks to Artur Skawina).
2002-01-27Version 0.99pre2vdr-0.99pre2Klaus Schmidinger
- Fixed setting the OSD size in the 'Confirm' interface call (thanks to Deti Fliegl). - Removed the 'read incomplete section...' error message in the EIT processor. - Fixed channel data for "DW TV" (thanks to Axel Gruber). - Added DPID to "PREMIERE MOVIE 1" in channels.conf.cable (thanks to Stephan Schreiber). - Prepared the OSD functions for multiple overlapping windows. - Removed the check to see whether the system time is running linearly. - Improved performance of SVDRP command entry. - Removed EPGBugfixLevel '3' - after more than a year Pro-7 finally managed to broadcast the correct timestamps for EPG events between 0:00 and 6:00! - Fixed failing watchdog timer if program hangs in OSD activities (thanks to Carsten Koch). - No longer requiring 'libncurses' if compiling without DEBUG_OSD=1 and REMOTE=KBD (thanks to Lauri Pesonen). - The "Recordings" menu now displays a hierarchical structure if there are subdirectories for the recordings. This can be controlled through the "RecordingDirs" parameter in the "Setup" menu. See "MANUAL/Replaying a Recording" for details. - Improved speed of setting the Help button texts. - Fixed handling file names that contain single quotes (') or dollar signs ($) in the call to the shutdown command (option '-s') and the recording command (option '-r'). - Improved error handling in the editing process; the resulting file will be deleted if an error occured. - A message is now prompted at the end of the editing process, indicating whether the process succeeded or failed. - Fixed setting the LastActivity timestamp after a shutdown prompt (thanks to Sergei Haller). - A message is now prompted if free disk space becomes low during recording. - The editing process now calls AssertFreeDiskSpace() to remove deleted recordings if the disk becomes full. - The "Main" menu now displays in its title the used disk space (in percent) and the estimated free disk space (in hh:mm), assuming a data rate of 30 MB per minute. - Activating the "Recordings" menu now displays "scanning recordings..." to give the user some feedback in case this takes longer. - Status messages are now displayed centered. - Removed the 'Tools' subdirectory from the VDR archive. All contributed tools can now be found at ftp://ftp.cadsoft.de/pub/people/kls/vdr/Tools.
2001-10-21Version 0.97vdr-0.97Klaus Schmidinger
- Implemented a lock file to prevent more than one instance of VDR from removing files from the video directory at the same time. - The new setup parameter SplitEditedFiles can be used to control whether or not the result of an editing process shall be written into separate files. - Fixed handling repeat function when using LIRC (thanks to Matthias Weingart). - The shutdown program (defined with the '-s' option) now also gets the channel number and recording title of the timer (see INSTALL). - New channel data for 'Premiere One', 'Premiere X-Action', 'Fox Kids Türkce' and 'N24' (thanks to Andreas Share, Ulrich Röder, Uwe Scheffler and Simon Bauschulte). Note that if you are using the default 'channels.conf' or 'channels.conf.cable' files you may need to check any exiting timers to see whether they still use the correct channel number. - Fixed the "EPG bugfix" (sometimes had duplicate information in Subtitle and Extended Description). - Fixed checking for valid video device when setting the video mode. - The external command 'sort' is no longer required. VDR now sorts the list of recordings itself, making sure that recordings that stem from repeating timers are sorted chronologically. Sorting is done according to the setting of the current locale, so you may want to make sure LC_COLLATE is set to the desired value (see INSTALL). - Fixed handling 'newline' characters in EPG texts (thanks to Rolf Hakenes for an improved version of his 'libdtv'). Newline characters are always mapped to a single "blank" in VDR, because they would otherwise disturb the Title and Subtitle layout in the channel display (where these are assumed to be single line texts) and would have to be specially handled in the 'epg.data' file and the LSTE command in SVDRP. - Mapping ` ("backtick") characters in EPG texts to ' (single quote). - Fixed timers starting and ending at unexpected times. 'localtime()' was not thread safe, now using localtime_r(). - Removed the "system time seen..." message. - Fixed a bug in the replay mode display when pressing the Green or Yellow button while in trick mode (thanks to Stefan Huelswitt) - Closing all open file descriptors when calling external programs. - The menu timeout now also works when pressing the "Back" button during replay to enter the "Recordings" menu. - Updated 'channels.conf' for the "Bundesliga" channels of Premiere World (thanks to Helmut Schächner). - Fixed reading timers.conf and channels.conf that contain blanks after numeric values. - Fixed handling trick modes near the beginning and end of a recording. - Pressing the "Back" button while replaying a DVD now leads to the DVD menu.
2001-09-23Version 0.96vdr-0.96Klaus Schmidinger
- Made VDR compile with libdvdread-0.9.1 (thanks to Andreas Schultz). Note that you now _need_ version 0.9.1 of libdvdread to compile VDR with DVD support! - Several fixes to the replay mode display (thanks to Stefan Huelswitt): no more replay mode display when pressing the "Green" or "Yellow" button (Skip +/-60s); fixed timeout when pressing '0' to set an editing mark while the progress display is not shown; mode display is shown after progress display is closed; pressing "Ok" while the mode display is on brings up the progress display; no more unnecessary display of "normal play mode". - Supplying the new frontend parameter 'Inversion' (currently it is always set to INVERSION_AUTO, which should work with all channels on Astra). - Removing unnecessary double quotes from EPG Subtitle in EPGBugfixLevel >=1. - EPG info is now updated if the contents changes but the ID remains the same. - Fixed handling SVDRP commands whith more than one blank between the command word and the options. - The current volume setting is now saved to setup.conf and restored at the next program start. - New command line option '-r' to define a command that gets called before and after each recording (see INSTALL for details). - Implemented a check to see whether the system time is running linearly. - Writing the current time (as seen by VDR) into the log file when starting a timer recording (this may help debugging cases where timers don't start at the expected time). - Made the volume, mute and power keys work when a menu is active, too (thanks to Matthias Weingart).
2001-09-16Version 0.95vdr-0.95Klaus Schmidinger
- Fixed behaviour in case the shutdown didn't take place (there were many "next timer event at..." messages in that case). - Reduced the default value for MinEventTimeout to 30 minutes. - Fixed detecting manual start in shutdown feature. - An error message is now displayed in case the Transfer Mode can't be started because the necessary DVB card is currently recording (or there is no DVB card that can access this channel). - Fixed toggling channels with the '0' key in case the "Ok" button has been pressed to display the current/next information. - Pressing the "Power" key now always initiates the shutdown sequence (after user confirmation in case of a recording timer), event if there is currently a menu or a replay session active. Note the additional remarks in INSTALL regarding the values of the two parameters given to the shutdown program in case of a currently recording timer. - Switching through channel groups with the "Left" and "Right" keys now always starts at the group that contains the current channel. - Implemented "Multi Speed Mode" (thanks to Stefan Huelswitt). - Implemented backtracing to hit the right spot after fast forward/rewind (thanks to Stefan Huelswitt). - Implemented replay mode display (thanks to Stefan Huelswitt, with a few rewrites by kls). - Changed the size of all input buffers used to parse config files or receive SVDRP commands to the same value of 10KB. This allows long strings to be used in the 'summary' field of a timer, for instance. - The pipe to the Dolby Digital replay command (option '-a') now closes all unused file descriptors in the child process to avoid crashing when the OSD is used (thanks to Andreas Vitting). - Switched to the driver's new tuning API (VDR now requires a driver version dated 2001-09-14 or higher). - Changed obsolete macro VIDEO_WINDOW_CHROMAKEY to VID_TYPE_CHROMAKEY (thanks to Guido Fiala). - New version of the "Master-Timer" tool (thanks to Matthias Schniedermeyer). - Better error handling when writing configuration files. - Fixed putting the final editing mark into the edited version's marks file. - Fixed manipulating an editing mark at the very end of a recording. - Fixed starting a new replay immediately after stopping a previous one (had caused a mix between live video and replay). - Three new keys ("Volume+", Volume-" and "Mute") to control the DVB card's audio output volume. - New version of the 'epg2timers' tool (thanks to Carsten Koch).
2001-09-02Version 0.94vdr-0.94Klaus Schmidinger
- Implemented automatic shutdown (see INSTALL and MANUAL for details). - New SVDRP command NEXT to show the next timer event. - The new remote control key "Power" can be used to turn the VDR machine off (this requires the presence of the '-s' option). - Fixed code for the default "Ok" button on the PC keyboard (was 0x162 on the "good old" keyboards (with the F-keys at the left side), while it changed to 0x15E on the newer keyboards). - When a recording is edited, the summary information (if present) is now also copied. - When a recording is running on the primary interface, any attempt to change the current channel will now lead to a "Channel locked" message. - The main program loop now first checks whether any timer recordings are finished, before starting a new timer recording. This is important in case one timer ends at the same time another timer starts. - New setup parameter OSDMessageTime to define how long an OSD message shall be displayed. - The "File" parameter of a timer can now contain the '~' character to store the recording in a hierarchical directory structure. The '~' character has been chosen since the file system's directory delimiter '/' may be part of a regular programme name (showing the directory hierarchy in the "Recordings" menu will follow later). - Repeating timers now create recordings that contain the 'Subtitle' information from the EPG data in their file name. Typically (on tv stations that care about their viewers) this contains the episode title of a series. The subtitle is appended to the timer's file name, separated by a '~' character, so that it results in all recordings of this timer being collected in a common subdirectory. You can disable this with the 'UseSubtitle' parameter in the "Setup" menu. - The summary information is now taken from the EPG data at the actual time of recording (no longer at the time the timer is created in the "Schedule" menu). If a timer already has summary data, that data will be used. If you have repeating timers in your 'timers.conf', you may want to make sure they do NOT contain any summary information (that's the last field in the timer definitions). Use your favourite text editor to delete that information. That way every recording will store the actual summary data at the time of the recording.