| Age | Commit message (Collapse) | Author |
|---|
|
- Fixed detecting transponder lock in cDvbTuner (based on a patch from Stefan
Meyknecht).
- What was previously marked with WAIT_FOR_LOCK_AFTER_TUNING is now permanently
active and uses a cCondVar to signal when a transponder is locked.
- Added some missing 'const' to cChannel.
- Added a sample setup for 'DisiCon-4 Single Cable Network' to 'diseqc.conf'
(thanks to Oliver Endriss).
- Fixed attaching a cPlayer to a cDevice, so that 'Operation not permitted'
errors don't occur any more (thanks to Marco Schlüßler).
- Fixed a case where the resultBuffer in cRemux ran full before getting a sync.
- Removed the usleep() call from cDvbPlayer::Action() to make VDR run on NPTL
systems (thanks to Alfred Zastrow). The NPTL check at startup has also been
removed.
- Taking the complete size of available data into account when deciding whether
to clear the transfer buffer to avoid overflows (thanks to Reinhard Nissl).
- Updated Romanian language texts and the iso8859-2 fonts (thanks to Lucian Muresan).
- Now actually using the iso8859-15 fonts (thanks to Lucian Muresan).
- Some minor code cleanups (thanks to Prakash K. Cheemplavam).
- Fixed missing cleanup at program exit in case there is a problem with a plugin
(thanks to Mattias Grönlund for pointing this out).
- Increased the required free buffer space in the resultBuffer of cRemux to
2 * IPACKS to avoid a buffer overflow in case a cTS2PES writes one complete
packet and then (within processing the same TS packet) wants to write another
small packet.
- Removed the signal handler and WakeUp() call from cThread (it is no longer
needed).
- Added some checks when canceling a thread and removed the usleep() in
cThread::Start() (suggested by Ludwig Nussel). Also removed 'running' from
cThread and using only childTid to indicate whether a thread is actually
running.
- Added cCondWait::Sleep() and using it to replace all usleep() calls (based
on a suggestion by Werner Fink).
- Only assigning events to timers if the related schedule has actually been
modified.
- When searching for the present event, the running status is now only taken
into account if the event has been "seen" within the past 30 seconds.
This avoids shortly seeing the wrong events in the channel display when
switching to a channel that hasn't been tuned to in a while.
|
|
- Fixed checking for the presence of NPTL (thanks to Jouni Karvo).
- Making sure section filters are only set if the device actually has a lock
(thanks to Andreas Share for pointing this out).
- Fixed a possible NULL pointer assignment in cMenuText::SetText() (thanks to
Marco Schlüssler).
- Fixed a crash in case the last line in channels.conf is a group separator and
that group is selected in the channel display (thanks to Dick Streefland).
- Added cRingBufferLinear::Read() to read directly from a file handle into the
ring buffer.
- Using timeouts in ring buffers to avoid 'usleep()'.
- Clearing the 'Transfer Mode' ring buffer after clearing the device to avoid
an "almost full" ring buffer.
- Removed locking from cRingBufferLinear for better performance under high load.
- Using a cRingBufferLinear in cRemux to avoid unnecessary copying of data.
- Using a cRingBufferLinear in cTSBuffer and filling it in a separate thread
to avoid buffer overflows. Plugins using cTSBuffer will need to remove the
call to the now obsolete Read() function (see cDvbDevice::GetTSPacket() for
the new usage of cTSBuffer).
- cRemux::Process() has been split into Put(), Get() and Del() to allow for a
better decoupling of the remuxing and disk writing process. Plugins using
cRemux will need to be modified accordingly.
- The actual disk writing in recordings is now done in a separate thread to
improve the overall throughput.
- Changed cRemux so that it returns the maximum available amount of data with
each call, not just 2048 byte.
- Added a visual display of all cRingBufferLinear buffers for debugging. To
activate it, define DEBUGRINGBUFFERS in ringbuffer.h.
- Instead of cCondVar now using the new cCondWait (which also avoids a possible
"near miss" condition; thanks to Sascha Volkenandt for pointing out this one).
cCondVar is still present for plugins that use it (and VDR itself also still
uses it in cRemote).
- The cRingBuffer now does EnableGet()/EnablePut() only if the buffer is more than
one third full or empty, respectively. This dramatically improves recording
performance and reduces system load (thanks to Marco Schlüßler for doing some
testing regarding buffer performance and giving me some hints that finally led
to finding out that this was the basic problem causing buffer overflows).
- Improved Transfer Mode (thanks to Marco Schlüßler for suggestions and testing).
- Fixed a possible crash with inconsistent SI data (thanks to Marcel Wiesweg).
- Fixed showing the replay mode if the OSD is currently in use (thanks to Kimmo
Tykkala for pointing out this problem).
- cOsdProvider::NewOsd() now always returns a valid pointer, even if the OSD is
currently in use (it will then return a dummy cOsd object and write a message to
the log file).
- Added Estonian language texts (thanks to Arthur Konovalov).
- Fixed 'newplugin' and libsi/Makefile to use the compiler defined in $(CXX) for
generating file dependencies (thanks to Andreas Brachold).
- Moved the initialization of aPid1 and aPid2 to the beginning of cDvbDevice::cDvbDevice()
to have them set in case a patch references them (thanks to Wayne Keer for pointing
this out).
- Completed the Russian OSD texts (thanks to Vyacheslav Dikonov).
- Avoiding unnecessary section filter start/stops (thanks to Marco Schlüßler).
- Made the "Channel not available!" message and mtInfo instead of mtError (suggested
by Wayne Keer).
- Made volume control more linear (thanks to Emil Naepflein and Udo Richter).
- Now skipping code table info in SI data (suggested by Milos Kapoun).
- Added missing Czech characters to fontosd-iso8859-2.c (thanks to Milos Kapoun).
- Fixed a crash in the time search mechanism (reported by Reinhard Nissl).
- If one PID can't be added, the whole cDevice::AttachReceiver() will now fail
and all PIDs added so far will be deleted (thanks to Marco Schlüßler for
pointing out this one).
- Now only saving channels.conf after a modification made by the user (avoids
lots of disk access due to automatic channel updates). Automatic channel
modifications will be saved every 10 minutes if no recording is currently
active.
- Removed the 'Log' parameter from the cChannel::Set... functions. Instead
checking if the channel has a non-zero number.
- Updated 'channels.conf.terr' for Hannover (thanks to Sven Kreiensen).
|
|
- In order to avoid problems on NPTL systems, VDR now checks for the presence
of NPTL at program start, and if it is, exits and tells the user to do
'export LD_ASSUME_KERNEL=2.4.1' before starting VDR.
- Revisited the "Fixed missing audio after replaying a DVD" change because it
introduced a sound disturbance when switching between channels on the same
transponder (thanks to Marco Schlüßler).
- In order to avoid problems on UTF-8 systems, VDR now checks for the presence
of UTF-8 at program start, and if it is, exits and tells the user to turn off
UTF-8 before starting VDR (thanks to Ludwig Nussel for pointing out a problem
with systems that are set to use UTF-8). There are also problems in case the
video partition is mounted with "iocharset=utf8" (thanks to Jörg Knitter for
reporting this one).
Please also read the "IMPORTANT NOTES" section in the INSTALL file!
- Some changes to the SPU decoder interface (thanks to Sven Goethel).
- Some improvements in cOsd creation (thanks to some suggestions by Jouni Karvo).
- Fixed calculating the OSD width and height (thanks to Olaf Henkel for reporting
a problem with long event texts in the "Classic VDR" skin).
- Fixed switching channels while an encrypted channel is being recorded, because the
channel was switched if the new channel was on the same transponder and was
a radio channel or an unencrypted channel (thanks to Martin Dauskardt for reporting
this one).
- No longer using the external 'find' command to scan the video directory for
recordings (based on a suggestion by Mirko Dölle).
- The list of recordings is now kept statically in memory to avoid long delays
when opening the "Recordings" menu. As a side effect, external modifications to
the video directory are no longer immediately reflected in the "Recordings" menu.
If a plugin manipulates the video directory in any way, it can call the function
Recordings.TriggerUpdate() to trigger an update of the list of recordings.
If some external tool manipulates the video directory, it can touch the file
'.update' in the video directory to trigger an update of the list of recordings.
- Fixed a memory leak in theme description handling (thanks to Sascha Volkenandt).
- Added cDevice::Flush() to make sure that all data in the video card's buffers
has been processed (thanks to Reinhard Nissl). Currently this is not yet actually
implemented for FF DVB cards.
- Fixed handling the color button texts in cMenuEditStrItem (thanks to Maynard
Cedric for reporting this one).
- Fixed the description of cRingBufferLinear (thanks to Ludwig Nussel for pointing
out this one).
- Fixed cRingBufferLinear::Get() in case the buffer wraps around (thanks to Ludwig
Nussel for reporting this one).
|
|
- Fixed a memory leak in thread handling when using NPTL (thanks to Jon Burgess).
- Fixed handling Setup.RecordDolbyDigital, which was broken since version 1.1.6.
- Fixed handling text lengths for itemized EPG texts (thanks to Marcel Wiesweg).
- Fixed the help for LSTE and LSTR (was broken in 1.3.6).
- Improved iso8859-7 fonts (thanks to Dimitrios Dimitrakos).
- Added some 3-letter language codes (thanks to Marcus Mönnig).
- Added language code handling to the subtitling descriptor in 'libsi' (thanks to
Pekka Virtanen).
- Moved several menu item classes from menu.c to menuitems.[hc] to make them
available for plugins.
- The epg2html.pl script now handles '|' in description texts.
- The new setup option "OSD/Use small font" can be used to control the use of
the small font (see MANUAL for details).
- Swapped osd.[hc] and osdbase.[hc] to have the virtual OSD base class named cOsd.
Plugins may need to adjust their #include statements.
- Colors are now given as AARRGGBB instead of AABBGGRR. The values are mapped to
the driver's (wrong) sequence in dvbosd.c (this should really be fixed in the
driver, together with the endian problem).
- The new OSD setup parameters "Left" and "Top" can be used to define the top left
corner of the OSD.
- The OSD size parameters are now in pixel (as opposed to formerly characters).
When reading a 'setup.conf' file from an older version of VDR, the OSDwidth
and OSDheight values will be converted to pixel automatically.
- The OSD is now fully device independent. See the comments in VDR/osd.h and the
description in PLUGINS.html for information on how a plugin can implement an OSD
display on arbitrary hardware.
- The OSD (actually its cBitmap class) can now handle XPM files. There are several
XPM files in the VDR/symbols directory which can be used by skins (some of these
have been taken from the "elchi" patch). See VDR/skinsttng.c for examples on how
to use these.
- Due to the changes in the OSD handling the DEBUG_OSD option for a textual OSD
has been dropped. There will be a plugin that implements a skin with this
functionality later.
- The entire OSD display can now be implemented via "skins". See VDR/skins.[hc],
VDR/skinclassic.[hc], VDR/skinsttng.[hc] and PLUGINS.html for information on how
a plugin can implement its own skin. By default VDR comes with a "Classic" skin
that implements the OSD display known from previous versions, and the new skin
named "ST:TNG Panels", which is also the default skin now. The actual skin can
be selected through "Setup/OSD/Skin".
- The colors used in a skin can now be configured using "themes". See PLUGINS.html
for information on how a skin can make use of themes, and man vdr(5) for the
structure of a theme file. The actual theme to use can be selected through
"Setup/OSD/Theme".
- Added Croatian language texts (thanks to Drazen Dupor).
NOTE: there is apparently a problem with the newly introduced iso8859-2 font,
because as soon as Setup/OSD/Language is set to Croatian (currently the last one
in the list) everything freezes and the vdr processes have to be killed with -9
and the driver needs to be reloaded. Maybe somebody else can find out what's
going wrong here...
- Added missing NULL checks when accessing sectionHandler in device.c (thanks to
Pekka Virtanen).
- Fixed setting the time from the DVB data stream (thanks to Helmut Auer for
pointing out a frequency/transponder handling mixup). This now also takes the
actual source (sat, cable etc.) into account. Please go into "Setup/EPG" and
set the "Set system time" and "Use time from transponder" parameters accordingly
(this is necessary even if you have already set them before!).
|
|
- Fixed handling language codes in case there is no audio or Dolby PID.
- Fixed handling CA ids (was broken in 1.3.3).
- Fixed the SVDRP command 'STAT DISK' to avoid a 'division by 0' in case the
disk is full (thanks to Jens Rosenboom).
- Fixed handling bitmap indexes for 256 color mode (thanks to Andreas Regel).
- Now handling "linked services" (based on the 'autopid' patch from Andreas
Schultz). Linked channels are detected and added to 'channels.conf', but
currently they are not yet presented to the user other than being in the
normal channel list (this will come later).
- Preliminary fix for the "Unknown picture type error" (thanks to Sascha
Volkenandt for his support in debugging this one). This may slow down switching
between channels on different transponders for now, but a better solution will
come later.
- Fixed the validity check for channel IDs, because some providers use TIDs with
value 0 (thanks to Thomas Bergwinkl).
- Enabled switching to a channel even if it has no Vpid or Apid set, because these
might be automatically set when tuned to that transponder.
- No longer closing the Channels menu after trying to switch to a channel that
is currently not available.
- Removed the now obsolete CaCaps stuff. The Setup/CICAM menu now displays the
actual CAM type as reported by the CAM. The 'ca.conf' file has been stripped
down to the values 0..4.
|
|
- Fixed a lockup in the EPG scanner when no non-primary device was available
(thanks to Martin Holst for reporting this one).
- Fixed a compiler warning about virtual cConfig::Load() functions (thanks to
Lauri Tischler for reporting this one).
- Fixed a warning about character comparison in libsi/si.c (thanks to Lauri
Tischler for reporting this one).
- The new parameter "Update channels" in the "Setup/DVB" menu can be used to
control if and how channels will be automatically updated (see MANUAL).
This has already been part of the 'autopid' patch by Andreas Schultz and has
now been adopted.
- Fixed a crash in case there is no DVB hardware present (thanks to Sascha
Volkenandt for reporting this one).
- Changed calculation of channel ids to make it work for tv stations that use
the undefined NID value 0 (thanks to Teemu Rantanen for reporting this one).
- Enhanced the SDT filter to handle multi part sections.
- Added support for selecting preferred EPG languages (based upon a patch by
Teemu Rantanen).
- Fixed a 'const' in libsi/si.h (thanks to Marcel Wiesweg).
- Fixed the 'su' call in 'runvdr' to make it work on systems that require the
user name to appear before the command option (thanks to Robert Huitl).
- Fixed testing for matching section filters in case they are turned off (thanks
to Marcel Wiesweg).
- In case of incomplete sections an error message is now logged only every 10
seconds.
- Fixed a possible NULL pointer access in cEITScanner::Process() (thanks to
Andreas Kool).
- The actual transponder data is now taken from the NIT and existing channels
are adjusted if necessary. If the NIT contains new transponders, they are
scanned for channels during the next EPG scan. Note that only the satellite
branches are tested, cable and terrestrial need to be tested by somebody who
actually has such equipment.
|
|
- Changed thread handling to make it work with NPTL ("Native Posix Thread Library").
Thanks to Jon Burgess, Andreas Schultz, Werner Fink and Stefan Huelswitt.
- The cThread class now accepts a 'Description' parameter, which is used to log
the beginning and end of the thread, together with its process and thread id.
For descriptions that need additional parameters you can use the function
cThread::SetDescription(), which accepts 'printf()' like arguments.
Existing plugins that use threads should be changed to use this functionality
instead of explicit 'dsyslog()' calls inside their Action() function in order
to support logging the thread ids.
- Added "Slovak Link" and "Czech Link" to 'ca.conf' (thanks to Emil Petersky).
However, 'ca.conf' is now pretty much obsolete due to the automatic CA handling.
- Mutexes are now created with PTHREAD_MUTEX_ERRORCHECK_NP, which makes the
'lockingTid' stuff obsolete (thanks to Stefan Huelswitt).
- Changed font handling to allow language specific character sets.
- Adopted the small font character set from the "Elchi" patch (originally
provided by Alessio Sangalli).
- Greek language texts now use iso8859-7 character set (thanks to Dimitrios
Dimitrakos).
- Rearranged section data handling, so that the actual data handling can be done
separately, even from within plugins.
- The EPG data structures have been moved from eit.[hc] to epg.[hc] and have been
adapted to the general VDR coding style. Plugins that use these data structures
may need to change some function names (which should be obvious).
The name 'subtitle' has been changed to 'shortText' to avoid clashes with actual
subtitles that are part of a movie. The name 'extendedDescription' has been
shortened to 'description'.
- Replaced 'libdtv' with 'libsi' (thanks to Marcel Wiesweg), which is thread
safe and can be used by multiple section filters simultaneously.
- Added 'cRwLock' to 'thread.[hc]'. Note that all plugin Makefiles need to
define _GNU_SOURCE for this to work (see the example plugin Makefiles and
'newplugin').
- Fixed a problem with crc32 in SI handling on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Fixed an alignment problem in CAM access on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Added 'StreamType' setting to CAM communication, which is important for
Aston/SECA CAMs (thanks to Antonino Sergi).
- Now the CA descriptors are sent to the CAM in the 'program' or 'ES level'
sections, depending on where they are found in the PMT (thanks to Hans-Peter
Raschke for reporting this one). This should make SkyCrypt CAMs work.
- Now using the 'version number' of EPG events to avoid unnecessary work.
- Channel data is now automatically derived from the DVB data stream (inspired
by the 'autopid' patch from Andreas Schultz).
- The current channel is now automatically re-tuned if the PIDs or other settings
change. If a recording is going on on a channel that has a change in its
settings, the recording will be stopped and immediately restarted to use the
new channel settings.
- EPG events now use the complete channel ID with NID, TID and SID.
- Channel names in 'channels.conf' can now have a short form, as provided
by some tv stations (see man vdr(5)). Currently channels that provide short
names in addition to long ones are listed in the OSD as "short,long name",
as in "RTL,RTL Television". The short names will be used explicitly later.
- The Ca parameter in 'channels.conf' has been extended and now contains all the
CA system ids for the given channel. When switching to a channel VDR now tests
for a device that provides one of these CA system ids. The devices automatically
get their supported ids from the CI handler.
- The values in 'ca.conf' are currently without any real meaning. Whether or not
a channel with conditional access can be received is now determined automatically
by evaluating its CA descriptors and comparing them to the CA system ids
provided by the installed CAM. Only the special values 1-16 are used to assign
a channel to a particular device.
- Increased the maximum number of possible OSD colors to 256.
- Limited the line length in the EPG bugfix report, which appears to fix a buffer
overflow that caused a crash when cleaning up the EPG data (at 05:00 in the
morning).
|
|
- Added cDevice::GetSTC() (suggested by Sven Goethel).
- Added Asia-Pacific satellites to 'sources.conf' (thanks to Richard Scobie).
- Added North American satellites to 'sources.conf' (thanks to Luke Jenkins).
- Fixed getting the list of recordings in case VDR is started from a directory
where it doesn't have access to (thanks to Dirk Mueller).
|
|
- Fixed the TS to PES repacker so that it works with MPEG1 streams (thanks to
Andreas Kool).
- Fixed keeping track of the current channel number when moving channels in
the "Channels" menu (thanks to Mirko Günther for reporting this one).
- Made the plugin library directory configurable via Make.config (thanks to
Ludwig Nussel).
- Fixed scaling SPU bitmaps in Letterbox mode when playing NTSC material.
In order to do this, the cDevice was given a new member function GetVideoSystem().
- Fixed two warnings when compiling with gcc 3.3.1 (thanks to Alfred Zastrow for
reporting this).
- Made crc32() a static function in libdtv/libsi/si_parser.c to avoid a name clash
when using other libraries that also implement a function by that name (thanks
to Reinhard Nissl for reporting this one).
- Fixed staying off the end of an ongoing recording while replaying in time shift
mode (thanks to Rainer Zocholl for reporting this one).
- VDR now stops with exit status 2 if one of the configuration files can't be
read correctly at program startup (suggested by Rainer Zocholl).
- Fixed a crash when starting "Pause live video" twice within the same minute on
the same channel.
- Fixed freezing replay if a timer starts while in Transfer Mode from the device
used by the timer, and the timer needs a different transponder (thanks to
Richard Robson for reporting this one).
- Fixed toggling channels with the '0' key (thanks to Mirko Günther for reporting
this one).
- Made the "Zap timeout" (the time until a channel counts as "previous" for
switching with '0') a setup variable, available in "Setup/Miscellaneous"
(suggested by Helmut Auer).
- Removing deleted recordings faster than normal when cutting, to avoid running
out of disk space (thanks to Manfred Schmidt-Voigt for reporting this one).
|
|
- Fixed a bug in channel switching after Left/Right has been pressed (thanks to
Michael Walle for reporting this one).
- Improved channel switching in case of numerical input by switching as soon as
the channel is unique (suggested by Jaakko Hyvätti).
- Fixed creating a new channel in the "Channels" menu in case the 'channels.conf'
contains ':@nnn' lines with no text (thanks to Guy Roussin for reporting this
one).
- Changed the behaviour of the '0' key in normal viewing mode so that a channel
only qualifies as "previous" if it has been selected for at least 3 seconds
(suggested by Thomas Keil).
- Now clearing the channel info display when entering numeric keys to switch
channels (suggested by Guy Roussin).
- Added missing I18N entry for "Ppid" (thanks to Rolf Ahrenberg).
- Fixed handling the color buttons in the "Edit channel" menu (thanks to Thomas
Keil for reporting this one).
- Fixed an occasional "Broken pipe" error in SVDRP connections (thanks to Gerhard
Steiner for reporting this one).
- Fixed checking CA capabilities with the dvb-kernel driver (thanks to Kenneth
Aafløy).
- Fixed selecting the device, because sometimes an FTA recording terminated a
CA recording (thanks to Emil Naepflein).
- Fixed a possible crash in case a VFAT file system is used without compiling VDR
with VFAT=1 (thanks to Ernst Fürst for reporting this one).
- Now the program uses the values of VIDEODIR and PLUGINDIR defined in Makefile
or Make.config as defaults (thanks to Steffen Barszus).
- Added the usual menu timeout to the CAM menus.
|
|
- Fixed OSD access in case none of the devices provides one (thanks to Axel
Gruber for reporting this one).
- Fixed editing channels ('timers.conf' was not written after a channel has
been modified, which could result in errors upon the next start of VDR).
- Fixed a crash when canceling a newly created timer (thanks to Thomas Schmidt
for reporting this one).
- Completed Hungarian language texts (thanks to Istvan Koenigsberger and Guido
Josten).
- Fixed device handling in the CICAM menu in case a VDR instance was started
with a specific device using the -D option (thanks to Gerald Raaf for reporting
ths one).
- Initializing the current channel to '1' to avoid a crash in creating a new
timer in case there is no device in the system that can actually receive any
channel (thanks to Malcolm Caldwell for reporting this one).
- Some corrections to the Finnish OSD texts (thanks to Niko Tarnanen and Rolf
Ahrenberg).
|
|
- Modified handling of audio packets in cDvbPlayer for better sync with external
AC3 replay (thanks to Werner Fink).
- Fixed a memory leak in cNonBlockingFileReader (thanks to Stefan Huelswitt).
- Completed the French OSD texts (thanks to Gregoire Favre).
- Completed the Finnish OSD texts (thanks to Niko Tarnanen and Rolf Ahrenberg).
- Fixed I/O handling in case an explicit controlling terminal is given (thanks
to Oliver Endriss).
- Fixed resume file handling in case the resume.vdr file can't be written
(thanks to Gerhard Steiner).
- Fixed cutting a recording if there is only a single editing mark (thanks to
Ralf Klueber for reporting this one).
- Fixed volume display in case a plugin has its own OSD open (thanks to Marcel
Wiesweg).
- Fixed channel switching in the EPG scanner on single device systems.
- Completed the Swedish OSD texts (thanks to Tomas Prybil).
- Now switching to the channel used by the most recently started timer in case
the original current channel becomes unavailable due to a recording on a
different transponder. If this fails, a channel up/down switch is attempted as
a fallback solution (thanks to Lauri Tischler for reporting this one, and to
Hermann Gausterer for suggesting to switch to the recording channel).
- Fixed cReplayControl::Show() to avoid a compiler warning in g++ 3.2.3 (thanks
to Jan Ekholm for reporting this one).
- Completed the Slovenian OSD texts (thanks to Matjaz Thaler).
- Changed the DEFAULTPRIORITY in device.c to -1, so that the primary device
will be used for FTA recordings in case the CAM is connected to a non-primary
device (thanks to Reinhard Walter Buchner for reporting this one).
- The cCiHandler now closes its file handle when it gets destroyed.
- Checking for duplicate recordings with the same file name and disabling the
second timer (thanks to Peter Bieringer for reporting this one).
- Fixed handling newly created timers in case they are not confirmed with "Ok"
(thanks to Gerhard Steiner for reporting this one).
- It is now possible to directly delete a timer that is currently recording
(thanks to Alexander Damhuis for reporting this one).
|
|
- Removed a faulty parameter initialization in menu.c (thanks to Lauri Tischler for
reporting this one).
- Re-implemented the WaitForPut/WaitForGet stuff in cRingBuffer, since some plugins
actually need this. By default the buffer does not wait; if a plugin needs the
waiting functionality it can call the new SetTimeouts() function.
- Moved the call to cPlugin::Start() further up in vdr.c, to make sure it gets
called before trying to learn the keys (problem reported by Oliver Endriss).
- No longer starting the editing process if no marks have been set (thanks to
Matthias Raus for reporting this one).
- Added Catalanian language texts (thanks to Marc Rovira Vall and Ramon Roca).
Plugin authors may want to add the new entries to their I18N texts and contact
the translators to have their texts translated. Note that there are now 16
different OSD languages, so please make sure you have 16 versions for each of
your texts.
- Moved the detection of a broken video data stream from the cDevice into the
cRecorder to avoid problems with cReceivers that want to receive from PIDs
that are currently not transmitting (thanks to Marcel Wiesweg for reporting
this one).
- Fixed setting the locking pid after a timed wait (thanks to Andreas Schultz).
- Avoiding spurious section filter settings after a channel switch.
- Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt).
- Fixed reading 'epg.data' for channels with non-zero RID (thanks to Oliver
Endriss for reporting this one).
- Fixed EPG bugfix statistics to avoid log entires for undefined channels (thanks
to Lars Bläser for reporting this one).
- No longer waiting inside cIndexFile::CatchUp() to avoid shortly blocking replay
at the end of a recording.
|
|
- Introduced the new function cPlugin::Initialize(), in order to be able to separate
the startup of a plugin into an "early" (Initialize()) and "late" (Start()) phase
(suggested by Andreas Schultz). Plugin authors should please read the section
about "Getting started" in PLUGINS.html and adapt their code if applicable.
- Implemented the CableDeliverySystemDescriptor and TerrestrialDeliverySystemDescriptor
in libdtv (thanks to Sven Grothklags and Andreas Schultz).
- Fixed keeping live video active in case the primary device doesn't have an MPEG
decoder (thanks to Wolfgang Goeller for reporting this one).
- Implemented cDevice::ActualDevice(), which returns the actual receiving device in
case of 'Transfer Mode', or the primary device otherwise. This may be useful for
plugins that want to attach a cReceiver to the device where the current live video
is actually coming from.
- Added VDRVERSNUM to config.h, which can be used by the preprocessor to check the
actual VDR version (suggested by Stefan Huelswitt).
- Removed the WaitForPut/WaitForGet stuff from cRingBuffer, since it appears to
no longer be necessary due to the implementation of cNonBlockingFileReader in
dvbplayer.c. Also, the long timeout in WaitForPut caused problems with cReceivers
that use a ring buffer and didn't immediately return from their Receive() function
if the buffer runs full (thanks to Sascha Volkenandt for reporting this one).
- Fixed handling EPG data where the "extended event descriptor" comes before the
"short event" or a "time shifted event" (thanks to Jonan Santiago).
- Disabled the "Received stuffing section in EIT" log message.
- Updated 'channels.conf.terr' for Berlin (thanks to Juri Haberland).
- Avoiding short display of the "Main" menu when pressing the "Recordings" button
or the "Back" button during replay.
- Further increased the timeout until an index file is considerd no longer to be
written.
- Implemented separate PausePriority and PauseLifetime parameters for the recordings
created when pausing live video (suggested by Alfred Zastrow).
- Changed C++ style comments in libdtv into C style to avoid warnings in gcc 3.x
(thanks to Andreas Schultz).
|
|
- Fixed minimum lifespan of deleted recordings (thanks to Jaakko Hyvätti).
- Updated French OSD texts (thanks to Olivier Jacques).
- Fixed paging through lists with repeated Left/Right keys.
- Fixed setting the PCR-PID in case it is equal to one of the other PIDs (thanks
to Oliver Endriss for reporting this one).
- Fixed double call to MainMenuAction() of a plugin if invoked via a hotkey (thanks
to Kai Moeller for reporting this one).
- Fixed handling dedicated keys.
- Now turning off live PIDs when replaying. This avoids short spikes from other
channels when switching between Transfer Mode channels, and also lets an ongoing
replay continue even if a recording is started on the primary device.
- The RCU channel display no longer changes when a recording on a different
channel starts on the primary device.
- Restoring the current channel in case a recording has switched the transponder.
If all devices are busy and none of them can provide the current channel, the
message "Channel not available!" will be displayed.
- Removed the (no longer necessary) 'panic' stuff from cThread.
- Added cStatus::OsdItem() to provide the entire list of menu items to a plugin
(thanks to Carsten Siebholz).
- The red ("Record") and yellow ("Pause") button in the "Main" menu are no longer
available when replaying.
|
|
- The CAM is now accessed only if the current channel actually has a non-zero Ca
value, and CAM access is completely suppressed during replay, which avoids
problems in case the CAM is attached to the primary DVB device.
- The "Left" and "Right" buttons now set the cursor to the first or last list item
even if the list consist only of a single page, like, for instance, the Main menu
(thanks to Oliver Endriss).
- Made the log message "OSD window width must be a multiple of 4..." a debug message
instead of an error message, so it can be avoided by using a log level less than 3.
- Updated Greek language texts (thanks to Dimitrios Dimitrakos).
- Fixed faulty behaviour of the "Mute" key in case the channel display is visible
(thanks to Florian Bartels for reporting this one and Sascha Volkenandt for
helping to fix it).
- Modified LOF handling to allow for C-band reception (thanks to Malcolm Caldwell).
- Added some missing cAudio handling calls (thanks to Werner Fink).
- Replaced the 'for' loops in StripAudioPackets() with memset() calls (thanks to
Werner Fink).
- Further increased the timeout until an index file is considerd no longer to be
written.
- Fixed a crash in case the index file can't be accessed any more during replay
(thanks to Stefan Huelswitt for reporting this one).
- Fixed displaying messages in the status line in case they exceed the OSD width
(thanks to Gerhard Steiner for reporting this one).
- Avoiding high CPU load in case the connection to LIRC gets lost (thanks to
Ludwig Nussel).
- Fixed handling repeat function with LIRC (thanks to Ludwig Nussel).
- Fixed handling min/max borders when entering integer values (thanks to Andy
Grobb for reporting this one).
- Implemented a "resume ID" which allows several users to each have their own
resume.vdr files (thanks to Martin Hammerschmid). This parameter can be set in
the "Setup/Replay" menu (see MANUAL for details).
- Now using 'libdtv' version 0.0.5 (thanks to Rolf Hakenes for the new version
and Stefan Huelswitt for adapting VDR to it).
- If no device with an MPEG decoder can be found at startup, the first device
is now used as primary device (just to have some device).
- Adjusted some Premiere channels in 'channels.conf' (thanks to Thomas Koch).
- Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt).
- The 'epg.data' file is now read after all plugins have been started (thanks
to Sascha Volkenandt).
- The LIRC remote control no longer tries to learn keys if it can't connect to
the LIRC daemon (thanks to Ludwig Nussel for reporting this one). The same
applies to the RCU remote control in case of errors during startup.
- Fixed handling of Ca parameters with values <= MAXDEVICES, which don't indicate
an actual encrypted channel (thanks to Stefan Huelswitt for reporting this one).
|
|
- Removed signal handling and usleep(5000) from cDvbOsd::Cmd() (apparently this
is no longer necessary with DVB driver 1.0.0pre2 or later).
- If the primary device (as defined in setup.conf) doesn't have an MPEG decoder
(and thus can't be used as a primary device) VDR now scans all devices at
startup and uses the first one (if any) that actually has an MPEG decoder.
That way this will also work automatically if the primary device is implemented
by a plugin.
- Fixed a possible deadlock when using the "Blue" button in the "Schedules" menu
to switch to an other channel (thanks to Torsten Herz).
- Fixed the EPG bugfix code number for the MAX_USEFUL_SUBTITLE_LENGTH fix (thanks to
Torsten Herz for reporting this one).
- Modified the EPG scanner to avoid CPU load peaks (thanks to Steffen Becker for
reporting this one).
- Fixed support for Viaccess CAMs (thanks to Axel Gruber for helping to debug this).
|
|
- Fixed the 'channels.conf' entries for "Studio Universal" and "Disney Channel".
- Fixed handling channels in the "Channels" menu in case there are ':@nnn' group
separators without names (thanks to Guy Roussin for reporting this one).
- The SVDRP command CHAN now also accepts channel IDs.
- Increased the timeout until an index file is considerd no longer to be written
(sometimes in time shift with heavy system load the index file was closed too
early by the replay thread).
- Implemented "Link Layer" based CAM support, which hopefully will solve the
problems with CAMs we had in the past. To use this you need the driver version
2002-01-08 or higher (with the new firmware supporting the "Link Layer" protocol).
- Added an EPG bugfix that moves the Subtitle data to the Extended Description in
case the latter is empty and the Subtitle exceeds some useful length.
- Since several channels put very long strings into the Subtitle part of their
EPG data, that string is now limited in length when used in a recording's
file name.
|
|
- Fixed saving the polarization parameter of channels that have a number in the
'source' parameter (thanks to Peter Seyringer for reporting this one).
- Updated 'channels.conf.terr' (thanks to Andy Carter).
- Updated 'channels.conf.cable' (thanks to Achim Lange).
- First step towards a "unique channel ID". The channel ID is a human readable
string, made up from several parameters of the channel's definition in the file
'channels.conf' (see man vdr(5) for details).
In order for the "unique channel ID" to work, all channel definitions now must
be unique with respect to the combination of their Source, Frequency and SID
parameters. You may have to fix your 'channels.conf' manually if there are error
messages in the log file when loading it. BE SURE TO MAKE A BACKUP COPY OF YOUR
'channels.conf' AND 'timers.conf' FILE BEFORE SWITCHING TO THIS VERSION, AND CHECK
VERY CAREFULLY WHETHER YOUR TIMERS ARE STILL SET TO THE RIGHT CHANNELS!
When reading an existing 'timers.conf', the channels will be identified as before
by their numbers. As soon as this file is written back, the channel numbers will
be replaced by the channel IDs. After that it is possible to manually edit the
'channels.conf' file and rearrange the channels without breaking the timers.
Note that you can still define new timers manually by using the channel number.
VDR will correctly identify the 'channel' parameter in a timer definition and
use it as a channel number or a channel ID, respectively. Also, the SVDRP commands
that return timer definitions will list them with channel numbers in order to
stay compatible with existing applications.
The channel ID is also used in the 'epg.data' file to allow EPG information from
different sources to be stored, which would previously have been mixed up in case
they were using the same 'service ID'. Note that the contents of an existing
'epg.data' file from a previous version will be silently ignored, since it doesn't
contain the new channel IDs. When inserting EPG data into VDR via SVDRP you now also
need to use the channel IDs.
Currently the EPG data received from the DVB data stream only uses the 'Source'
and 'Service ID' part of the channel ID. This makes it work for channels with
the same service IDs on different sources (like satellites, cable or terrestrial).
However, it doesn't work yet if the service IDs are not unique within a specific
source. This will be fixed later.
- Added missing SID parameters to 'channels.conf'. Some channels have been removed
since they are apparently no longer broadcasted.
- Removed dropping EPG events from "other" streams that have a duration of 86400
seconds or more (was introduced in version 1.1.10). This has become obsolete by
the modification in version 1.1.13, which fixed fetching the current/next information
to handle cases where the duration of an event is set wrongly and would last beyond
the start time of the next event. Besides, the change in 1.1.10 broke handling EPG
data for NVOD channels.
- Fixed a compiler warning regarding cMenuChannels::Del() and MenuTimers::Del() hiding
the base class virtual functions.
|
|
- Completely switched to the new CVS HEAD version of the linux-dvb driver.
The NEWSTRUCT compile time switch is now obsolete. The required driver is now
the CVS HEAD version dated 2002-11-01 or later.
- Adjusted the INSTALL file to the 1.1.x version.
- Only accepting key presses from the current remote control when learning (thanks to
Oliver Endriss).
- Fixed the EPG scanner, which broke 'Transfer Mode' as soon as it kicked in
(thanks to Oliver Endriss for reporting this one).
- Fixed handling audio tracks in cDvbDevice.
- Updated channels.conf.terr (thanks to Uwe Scheffler).
- Fixed displaying the group separators in the channel display (thanks to Martin
Hammerschmid for pointing out this one).
- The Makefile now includes the file Make.config (if present in the VDR source
directory), which allows the user to overwrite several settings with individual
values (suggested by Andreas Schultz). The VDR distribution archive does not
contain this file in order to not overwrite a user defined file. There is a
Make.config.template which contains the default values of the macros the user
can overwrite.
- Since there have been changes to the 'newplugin' script authors of plugins
may want to newly create their plugins' Makefiles with the new version of this
script, and adapt them to their individual needs (make sure you don't overwrite
your existing plugin directory - make a backup copy first!).
- Fixed reading EPG data via the SVDRP command PUTE (it changed the current
service ID).
- Fixed closing all dup'ed file descriptors in cPipe.
- Implemented a plugin interface for additional audio processing (see PLUGINS.html
under "Dolby Digital").
The functionality of the '-a' command line option has been reactivated.
Since the author doesn't have any Dolby Digital equipment this may or may not
work as expected. There may still be some places where a call to cAudios::Clear()
or cAudios::Mute() is necessary. Those with Dolby Digital equipment should please
take a look at this and maybe send patches.
Replaying Dolby Digital in ways other than through VDR's '-a' option will have to
be implemented as plugins. Those who have written patches for VDR version 1.0.x
should convert their work into the proper plugins for version 1.1.x.
Note to authors of cPlayer derived plugins: please read the modified comments
in device.h regarding the member functions cDevice::Clear(), cDevice::Mute() and
cDevice::PlayAudio(). Derived classes must call these base class member functions
to make sure all registered cAudio objects are properly handled. Also note that
the return type of cDevice::PlayAudio() has been changed to 'void', since this
function always has to accept the entire data block immediately and there is
nothing that could be reasonably done in case an error occurs in one of the
cAudio objects.
- Now checking the driver's DVB_API_VERSION in dvbdevice.h. Since VDR now requires
a driver dated 2002-11-01 or later the MIN_DVB_DRIVER_VERSION_FOR_TIMESHIFT and
DVB_DRIVER_VERSION stuff has been replaced with DO_REC_AND_PLAY_ON_PRIMARY_DEVICE,
which can be used to disable simultaneous recording and replaying on the primary
DVB device in case there are problems with this.
|
|
- Fixed some faulty default parameter initializations (thanks to Robert Schiele).
- Added further satellites to 'sources.conf' (thanks to Reinhard Walter Buchner
and Oliver Endriss).
- Updated Finnish OSD texts (thanks to Jaakko Hyvätti).
- Fixed a small glitch when switching channels (thanks to Dennis Noordsij for
reporting this one).
- Fixed handling multiple 'CaCaps' entries in 'setup.conf'.
- Group separators in 'channels.conf' may now be given like ':@201 My Channels',
where '@201' indicates the number to be given to the next channel. This can be
used to create 'gaps' in the channel numbering (see 'man 5 vdr'). BE CAREFUL
TO UPDATE YOUR 'timers.conf' ACCORDINGLY IF INSERTING THIS NEW FEATURE INTO YOUR
'channels.conf' FILE!
- Timers now internally have a pointer to their channel (this is necessary to
handle gaps in channel numbers, and in preparation for unique channel ids).
- Fixed slow reaction on SVDRP input (thanks to Guido Fiala for reporting this one).
- Added KI.KA to channels.conf.cable (thanks to Robert Schiele).
- Frequency values for cable and terrestrial channels in 'channels.conf' can
now be given either in MHz, kHz or Hz. The actual value given will be multiplied
by 1000 until it is larger than 1000000.
- Fixed skipping unavailable channels when zapping downwards.
- Fixed checking the Ca() status of a cDevice (thanks to Stefan Huelswitt).
- Fixed switching audio tracks in 'Transfer Mode' on the primary DVB device
(thanks to Steffen Barszus and Stefan Huelswitt for reporting this one and
helping to fix it).
- Fixed channel switching in case of an active 'Transfer Mode' on the primary
device ('Transfer Mode' is now launched with priority '-1').
- Fixed a ternary expression in dvbspu.c.
- Fixed handling 'Transfer Mode' on single device systems when recording an
encrypted channel (thanks to Stefan Huelswitt).
- Fixed blocking replaying in case an encrypted channel is being recorded on
the primary device.
- Now the name of the remote control is displayed when learning the keys.
- Fixed learning remote control keys in case there is more than one remote
control (thanks to Oliver Endriss for reporting this one).
- Implemented additional dedicated keys for "Play", "Pause", "Stop", "Record",
"FastFwd", "FastRew", "Channel+" and "Channel-". If your remote control supports
any of these keys you can delete your 'remote.conf' file and restart VDR to
go through the key learning procedure again in order to assign these new keys.
See MANUAL for more information.
Authors of player plugins should update their ProcessKey() functions so that
the new player keys have the same functionality as the "Up", "Down", "Left",
"Right" and "Blue" keys, respectively. Note that the existing functionality
of these keys should by all means be retained, since VDR (and any plugins)
shall be fully usable with just the basic set of keys. These new keys are only
for additional comfort in case the remote control in use supports them.
- Implemented new keys to directly access the VDR main menu functions "Schedule",
"Channels", "Timers", "Recordings", "Setup" and "Commands". If your remote
control provides keys you want to assign these functions to, you can delete
your 'remote.cof' file and restart VDR to go through the key learning procedure
again in order to assign these new keys. See MANUAL for more information.
- The new configuration file 'keymacros.conf' can be used to assign macros to
the color buttons in normal viewing mode, as well as to up to 9 user defined
keys. See MANUAL and man vdr(5) for more information. The default 'keymacros.conf'
implements the functionality of the "color button patch".
- Fixed a crash when learning the keys of several remote controls and pressing
buttons of those that have already been learned (thanks to Oliver Endriss for
reporting this one).
|
|
- Added cDevice::DeviceNumber() to get the number of a device, not counting any
gaps that might be in the index count.
- Fixed fetching the current/next information to handle cases where the duration
of an event is set wrongly and would last beyond the start time of the next
event.
- Adapted type names to the new HEAD version of the driver (which the previous
NEWSTRUCT branch has been merged into). Note that to use this driver version
you still need to add NEWSTRUCT=1 to the make call when building VDR. You
need a HEAD version of the LinuxDVB driver dated 2002-10-11 or later to compile
VDR with NEWSTRUCT=1.
- Fixed radio channels in channels.conf.cable (thanks to Robert Schiele and Uwe
Scheffler).
- Fixed switching the video format in the Setup/DVB menu (thanks to Uwe Scheffler
for reporting this one).
- Reactivated full handling of second audio PID (even in 'Transfer Mode').
- Fixed a crash when closing down with remote control plugins (thanks to Oliver
Endriss helping to debug this one).
- Commands in the file 'commands.conf' can now have a '?' at the end of their
title, which will result in a confirmation prompt before executing the
command.
- Changed a few leftover 'new char[...]' to MALLOC(char, ...).
- If a command executed from the "Commands" menu doesn't return any output, the
OSD will now be closed automatically.
- The SVDRP command PUTE now triggers an immediate write of the 'epg.data' file
(suggested by Gerhard Steiner).
- The new configuration file 'reccmds.conf' can be used to define commands that
shall be executed from the "Recordings" menu; see MANUAL and 'man vdr(5)' for
details (suggested by Gerhard Steiner).
|
|
- Fixed a missing Flush() call in the remote control learning procedure (thanks
to Oliver Endriss).
- Modified channel handling to cover all parameters necessary for DVB-C and DVB-T
(see man vdr(5) for the meaning of the additional parameters stored in the field
previously named 'polarisation'). Thanks to Uwe Scheffler and Andy Carter for testing.
If you have a system with different kinds of DVB cards, like DVB-T and DVB-C,
for instance, there is no more need to distinguish the channels through the
'Ca' parameter in order to assign them to the various DVB cards. This is now
taken care of by the "source" parameter. So a channel marked as "terrestrial",
for example, will only be received on DVB-T cards.
Note that the cChannel class has been moved into a separate file (channels.[ch]),
and that all data members have been made private and are now only accessible
through member functions. You may have to change any plugin code that accesses
cChannel data accordingly.
- The new configuration file 'sources.conf' contains the various signal sources
(satellites, cable and terrestrial) which are used in 'channels.conf' and
'diseqc.conf' (thanks to Reinhard Walter Buchner for adding some satellites to
'sources.conf' and Oliver Endriss and Lauri Tischler for testing and debugging).
- The 'diseqc' parameter in the channel definitions has been redefined to hold the
"source" of the given channel (which can be either a satellite, cable or terrestrial).
For compatibility with channels.conf files from older versions, numeric values in
this parameter will be tolerated, but they have no meaning. If you want to use
DiSEqC you will need to replace these old values with the proper source identifiers
defined in the new configuration file 'sources.conf'. See how this is done in the
'channels.conf' file that comes with the VDR package.
- The new configuration file 'diseqc.conf' can be used to set up the individual
diseqc configuration (see man vdr(5) for a description of the file format).
- The "Edit channel" menu has a new entry "Source:" in which the source of this
channel can be selected (either a satellite, cable or terrestrial). The set of
parameters at the end of this menu will change according to the type of source.
- The "Use DiSEqC" parameter in the "Setup/LNB" menu has been moved to the beginning
of the list and disables the rest of the parameters when set to "yes", since these
are now only meaningful if DiSEqC is _not_ used.
- Removed some unnecessary #includes from eit.c and changed cMenuRecordings::Del()
to cMenuRecordings::Delete() to avoid warnings in gcc-3.2 (thanks to Andreas
Schultz for pointing this out).
- Improved skipping channels that are (currently) not available (thanks to Stefan
Huelswitt).
- Updated channels.conf.terr and channels.conf.cable (thanks to Uwe Scheffler).
- Fixed a bug when pressing the "Blue" button in the main menu without having
displayed it (thanks to Oliver Endriss for reporting this one).
|
|
- Fixed an incomplete initialization of the filter parameters in eit.c (thanks
to Jeremy Hall).
- Fixed the 'newplugin' script for use with the NEWSTRUCT driver (thanks to
Andreas Schultz for reporting this one). If you have already created a plugin
directory and Makefile with 'newplugin', please apply the following patch to it:
-------------------------------------------------------
--- Makefile 2002/06/10 16:24:06 1.4
+++ Makefile 2002/09/17 15:36:36 1.5
@@ -15,7 +15,12 @@
### The directory environment:
+ifdef NEWSTRUCT
+DVBDIR = ../../../../DVB/include
+DEFINES += -DNEWSTRUCT
+else
DVBDIR = ../../../../DVB/ost/include
+endif
VDRDIR = ../../..
VDRINC = $(VDRDIR)/include
LIBDIR = ../../lib
@@ -34,7 +39,7 @@
INCLUDES = -I$(VDRINC) -I$(DVBDIR)
-DEFINES = -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
+DEFINES += -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
### The object files (add further files here):
-------------------------------------------------------
This is the diff for the 'setup' example that comes with VDR, so your line
numbers may be different.
- Added a missing 'public' keyword in device.h (thanks to Martin Hammerschmid).
- Fixed a race condition when starting 'Transfer Mode'.
- Rearranged the remote control key handling to allow plugins to implement
additional types of remote controls (see PLUGINS.html, section "Remote Control").
The previously used files 'keys.conf' and 'keys-pc.conf' have been replaced
by the file 'remote.conf', which holds the key definitions of all remote controls.
- The LIRC remote control keys are now handled just like the keyboard and RCU keys.
This means that you can use the lircd.conf file as is for your remote control,
without the need of editing it to make the key names the same as used in VDR.
When first starting VDR it will go into the "Learning keys" mode and ask you
to press the various keys. The resulting key assignment will be stored in
the file 'remote.conf'.
Since I have no way of testing the LIRC support, I hope I didn't break it in
the process...
- While learning the remote control keys it is now possible to press the 'Menu'
key to skip the definition of keys that are not available on your particular
RC unit.
- Fixed handling DVD subtitles in the SPU decoder (thanks to Andreas Schultz).
- Avoiding restarts due to 'panic level' when switching channels on the primary
device during EPG scan.
|
|
- Removed a superfluous error message from cLockFile::Unlock() (reported by
Helmut Auer).
- Fixed starting a recording of the current channel with only one DVB card
(thanks to Stefan Huelswitt for his help).
- A previous 'Transfer Mode' is now automatically re-started after a replay
stops.
- Only calling cStatus::MsgChannelSwitch() if a channel is actually going to
be switched or has actually been switched successfully (thanks to Stefan
Huelswitt).
- The EPG now drops events from "other" streams that have a duration of 86400
seconds or more (this avoids bogus entries like "PROGRAMMES ALLEMANDS").
- Fixed opening /dev/video in cDvbDevice::GrabImage() in case of NEWSTRUCT
driver (thanks to Andreas Schultz).
- Added a missing StripAudioPackets() to cDvbPlayer::Action() (thanks to
Stefan Huelswitt).
- Added an EPG bugfix for the latest VOX EPG data format.
|
|
- Fixed the 'newplugin' script to make it name the target for creating the
distribution package 'dist', as stated in the PLUGINS.html documentation.
If you have already created a plugin source directory and Makefile you may
want to check it and replace the 'package' target with 'dist' if necessary.
- Changed device handling for being able to do simultaneous recording and
replay on the same device (Time Shifting). In order for this to work you need
to use a driver with a firmware version that has this feature implemented.
- cDevice::ProvidesCa() is no longer virtual. The new function
cDevice::ProvidesChannel() is now used to determine whether a device can
receive a given channel, and by default this function returns false. So a
device that is a pure replaying device doesn't need to do anything here.
- Increased the recorder buffer size to 5MB in order to be able to better handle
multiple recordings.
- Implemented cTSBuffer for better handling TS packet buffering in derived
cDevice classes.
- Changed the interface if cDevice::GetTSPacket() to avoid unnecessary copying
of data.
- Removed cDevice::Channel(), since this makes no more sense with devices
receiving multiple channels.
- Switching through channels with the 'Up' and 'Down' keys now skips channels
that are currently not available (for instance because all devices are
recording and these channels are on different transponders).
- Implemented an SPU decoder (thanks to Andreas Schultz).
- Fixed a crash when entering an integer value outside the limits (thanks to
Stefan Huelswitt for reporting this one).
- Added play mode pmAudioOnlyBlack (thanks to Stefan Huelswitt).
|
|
- Fixed replaying the last few seconds of a recording.
- Added some missing #includes to files in libdtv for gcc 3.2 (thanks to Jürgen
Zimmermann).
- Added cDevice::NewOsd() to allow a derived cDevice class to implement its own
OSD capabilities (thanks to Andreas Schultz).
- Added cPalette::AllColors() for plugins that need to get the color entries of
a cPalette (see osdbase.h).
- The new SVDRP command CLRE can be used to clear the entire EPG data (suggested
by Matthias Schniedermeyer).
- Fixed handling one-shot timers that were already recording and had their start
time changed into the future (thanks to Matthias Schniedermeyer for reporting
this one).
|
|
- Adapted VDR to the NEWSTRUCT driver. To use the new driver, compile VDR with
'make NEWSTRUCT=1' (thanks to Holger Wächtler for some valuable advice).
By default it currently still uses the old driver.
- Added some missing #includes (thanks to Martin Hammerschmid).
- Changed the log error message "can't record MPEG1!" to "error in data stream!",
since the mentioning of MPEG1 has irritated many people.
- Consistently using malloc/free and new/delete (thanks to Andreas Schultz).
- Temporarily made cDevice::ProvidesCa() virtual (Andreas Schultz needs this
in his DXR3 plugin).
- cDevice no longer exposes a file handle to cPlayer. A derived cPlayer class
can now call DevicePoll() to see whether the replay device is ready for
further data. A derived cDevice class must implement Poll() and shall
check if any of its file handles is ready for data.
- Implemented several replay modes to allow players that play only audio (thanks
to Stefan Huelswitt).
- Improved cCondVar::Wait() and implemented cCondVar::TimedWait() (thanks to
Stefan Huelswitt).
- VDR no longer gives up if there is no DVB device. It continues to work if
there is at least one device, either a DVB device found by the core VDR code
itself, or a device implemented by a plugin.
|
|
- Re-visited the race condition fix in the cDvbPlayer (thanks again to Andreas
Schultz).
- Changed the VFAT handling to allow users who normally use it but have forgotten
to set it when compiling a new version of VDR to at least see their recordings
made with VFAT enabled (thanks to Christian Rienecker).
- Added some missing teletext PIDs (thanks to Joerg Riechardt).
- Fixed PID handling for cReceiver.
- Added a missing #include to ringbuffer.c (thanks to Martin Hammerschmid).
- Now using CC, CFLAGS, CXX and CXXFLAGS in Makefile.
- Changed the cDevice class to allow plugins to implement their own devices (see
PLUGINS.html for details).
|
|
- Added Hungarian language texts (thanks to Istvan Koenigsberger and Guido Josten).
- Activated cutting.
- Activated 'Transfer Mode'.
- Moved handling of the Menu key entirely into vdr.c.
- Switched VDR's own player to the new cPlayer/cControl structures.
- Switched handling 'Transfer Mode' to the new cPlayer/cControl structures.
- The following limitations apply to this version:
+ The '-a' option (for Dolby Digital audio) doesn't work yet.
+ Switching between different language tracks doesn't work yet.
|
|
- Improved the VDR Makefile to avoid a warning if the '.dependencies' file does
not exist, and also using $(MAKE) to call recursive makes.
- Changed the name of the 'package' target in the plugin Makefiles to 'dist'
(following the suggestions in the "GNU Make" manual). If you already have started
a plugin project, you may want to change this in your Makefile accordingly.
- Improved the plugin Makefile to avoid a warning if the '.dependencies' file does
not exist, and also using $(shell...) to get the version numbers. If you already have
started a plugin project, you may want to change this in your Makefile accordingly.
- Fixed some function headers to make them compile with gcc 3.x (thanks to
Gregoire Favre).
- Fixed the cutting mechanism to make it re-sync in case a frame is larger than the
buffer (thanks to Sven Grothklags).
- Added an error message if the directory specified in the '-L' option can't be
accessed (suggested by Stefan Huelswitt).
- Rearranged OSD class names to make 'cOsd' available for the main OSD interface.
- Completely moved OSD handling out of the cDvbApi class, into the new cOsd.
- Implemented cStatus to allow plugins to set up a status monitor.
See PLUGINS.html for details.
- Moved the cEITScanner out of dvbapi.h/.c, into the new eitscan.h/.c.
- Added Swedish language texts (thanks to Tomas Prybil).
- Fixed parsing 'E' records in epg2html.pl (thanks to Matthias Fechner for pointing
out this one).
- Removed compiler option '-m486' to make it work on non-Intel platforms. If you
have already started a plugin project, you may want to make sure you remove this
option from your existing Makefile.
- Completely rearranged the recording and replay functions to make them available
to plugins.
- Replay is now done in a single thread (no more syncing between input and output
thread necessary).
- It is now possible to record several channels on the same transponder with "budget
cards". VDR automatically attaches a recording timer to a card that already
records on the appropriate transponder. How many parallel recordings can actually
be done depends on the computer's performance. Currently any number of recordings
gets attached to a card, so you should carefully plan your timers to not exceed
the limit. On a K6-II/450 it was possible to record three channels from transponder
12480 with a single WinTV NOVA-S.
- Timers that record two successive shows on the same channel may now overlap and
will use the same DVB card. During the time where both timers record the data
is simply saved to both files.
- The following limitations apply to this version:
+ Transfer mode doesn't work yet.
+ The '-a' option (for Dolby Digital audio) doesn't work yet.
+ Switching between different language tracks doesn't work yet.
+ Cutting doesn't work yet.
|
