| Age | Commit message (Collapse) | Author |
|---|
|
- Using masks in EIT filtering to reduce the number of filters (thanks to Andreas
Schultz).
- Fixed handling Ca descriptors (thanks to Stefan Huelswitt).
- Now only those Ca descriptors are sent to a CAM that are actually understood
by that CAM.
- Re-enabled CAM communication during replay and on non-Ca channels. This requires
a DVB driver with firmware version 2613 or later.
- It is now possible to do simultaneous recording and replay with a single DVB
card, even with encrypted channels. This requires the use of the Link Layer
firmware, version 2613 or higher; the -icam firmware is still limited to live
encrypted channels only. Finally we have time shift for encrypted channels on
single card systems!
- Enhanced detection of pending user I/O from CAMs to avoid sluggish reaction
to remote control keypresses.
- Implemented "pause live video". You can now press "Menu/Yellow" or "Pause" on
your remote control while watching live video to start an instant recording
of the current programme and immediately start replaying that recording.
|
|
- The CAM is now accessed only if the current channel actually has a non-zero Ca
value, and CAM access is completely suppressed during replay, which avoids
problems in case the CAM is attached to the primary DVB device.
- The "Left" and "Right" buttons now set the cursor to the first or last list item
even if the list consist only of a single page, like, for instance, the Main menu
(thanks to Oliver Endriss).
- Made the log message "OSD window width must be a multiple of 4..." a debug message
instead of an error message, so it can be avoided by using a log level less than 3.
- Updated Greek language texts (thanks to Dimitrios Dimitrakos).
- Fixed faulty behaviour of the "Mute" key in case the channel display is visible
(thanks to Florian Bartels for reporting this one and Sascha Volkenandt for
helping to fix it).
- Modified LOF handling to allow for C-band reception (thanks to Malcolm Caldwell).
- Added some missing cAudio handling calls (thanks to Werner Fink).
- Replaced the 'for' loops in StripAudioPackets() with memset() calls (thanks to
Werner Fink).
- Further increased the timeout until an index file is considerd no longer to be
written.
- Fixed a crash in case the index file can't be accessed any more during replay
(thanks to Stefan Huelswitt for reporting this one).
- Fixed displaying messages in the status line in case they exceed the OSD width
(thanks to Gerhard Steiner for reporting this one).
- Avoiding high CPU load in case the connection to LIRC gets lost (thanks to
Ludwig Nussel).
- Fixed handling repeat function with LIRC (thanks to Ludwig Nussel).
- Fixed handling min/max borders when entering integer values (thanks to Andy
Grobb for reporting this one).
- Implemented a "resume ID" which allows several users to each have their own
resume.vdr files (thanks to Martin Hammerschmid). This parameter can be set in
the "Setup/Replay" menu (see MANUAL for details).
- Now using 'libdtv' version 0.0.5 (thanks to Rolf Hakenes for the new version
and Stefan Huelswitt for adapting VDR to it).
- If no device with an MPEG decoder can be found at startup, the first device
is now used as primary device (just to have some device).
- Adjusted some Premiere channels in 'channels.conf' (thanks to Thomas Koch).
- Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt).
- The 'epg.data' file is now read after all plugins have been started (thanks
to Sascha Volkenandt).
- The LIRC remote control no longer tries to learn keys if it can't connect to
the LIRC daemon (thanks to Ludwig Nussel for reporting this one). The same
applies to the RCU remote control in case of errors during startup.
- Fixed handling of Ca parameters with values <= MAXDEVICES, which don't indicate
an actual encrypted channel (thanks to Stefan Huelswitt for reporting this one).
|
|
- Fixed high CPU load during replay (thanks to Marcel Wiesweg for pointing out this
one).
- Fixed margin handling in cRingBufferLinear.
- Now polling the output device in 'Transfer Mode' and retrying to put packets
into the ring buffer.
- Resetting the CAM slot in case communication breaks down.
- Improved keyboard detection (thanks to Werner Fink).
- Updated 'channels.conf.terr' (thanks to Andy Carter).
- Fixed broken support for raw OSDs of plugins (thanks to Marcel Wiesweg for
reporting this one).
- Broken CAM connections are now restored automatically.
|
|
- Improved CAM handling (thanks to Reinhard Walter Buchner for a great deal of help
in debugging this). It is now possible to insert the CAM in any of the two slots,
to insert and remove it while VDR is running and even to have two CAMs inserted.
- Turning SI filtering off and on when switching channels.
- Timers are now processed even if an OSD menu is open (except for menus that
explicitly handle timers).
|
|
- Fixed a new/delete malloc/free mismatch in ringbuffer.c (thanks to Stefan
Huelswitt for reporting this one).
- Improved CAM handling.
|
|
- Fixed the 'channels.conf' entries for "Studio Universal" and "Disney Channel".
- Fixed handling channels in the "Channels" menu in case there are ':@nnn' group
separators without names (thanks to Guy Roussin for reporting this one).
- The SVDRP command CHAN now also accepts channel IDs.
- Increased the timeout until an index file is considerd no longer to be written
(sometimes in time shift with heavy system load the index file was closed too
early by the replay thread).
- Implemented "Link Layer" based CAM support, which hopefully will solve the
problems with CAMs we had in the past. To use this you need the driver version
2002-01-08 or higher (with the new firmware supporting the "Link Layer" protocol).
- Added an EPG bugfix that moves the Subtitle data to the Extended Description in
case the latter is empty and the Subtitle exceeds some useful length.
- Since several channels put very long strings into the Subtitle part of their
EPG data, that string is now limited in length when used in a recording's
file name.
|
|
- Now checking if there is a connection to the keyboard (thanks to Jaakko Hyvätti)
and only creating the KBD remote control if VDR is running in the foreground.
- Fixed taking an active SVDRP connection into account when doing shutdown (thanks
to Gregoire Favre for reporting this one).
- Changed setting of CXX and CXXFLAGS variables in Makefile, so that an externally
defined value will be taken if present (suggested by Robert Schiele).
Plugin authors should please change the lines
CXX = g++
CXXFLAGS = -O2 -Wall -Woverloaded-virtual
in their Makefile to
CXX ?= g++
CXXFLAGS ?= -O2 -Wall -Woverloaded-virtual
- Fixed recording overlapping timers on the same channel in case
DO_REC_AND_PLAY_ON_PRIMARY_DEVICE and/or DO_MULTIPLE_RECORDINGS is not defined
(thanks to Jaakko Hyvätti).
- No longer stopping/restarting the DMX when switching audio channels (thanks to
Sven Goethel).
- Fixed high CPU load in 'Transfer Mode' (thanks to Oliver Endriss).
- If a PC keyboard is used as remote control, the string entry fields in the
menus now accept character input directly (however, this works only for keys that
are not otherwise defined as remote control keys). Also, plugins can switch the
cKbdRemote class into "raw mode", where all keyboard input will be made available
through the new 'kKbd' key code and none of it will be processed as normal remote
control functions (thanks to Jan Rieger for suggestions and testing).
- Fixed deleting characters in string entry fields in 'insert' mode.
- Now using "Doxygen" to generate source documentation (thanks to Walter Stroebel
for providing an initial 'Doxyfile' configuration and adjusting some comments).
See INSTALL for information how to do this. Some function descriptions have
already been adapted to Doxygen, more will follow.
|
|
- The character '|' in description texts of EPG records is now interpreted as a
newline character (suggested by Gerhard Steiner).
- Updated 'channels.conf.cable' (thanks to Andreas Kool).
- Improved handling of repeated remote keys.
- The RCU now only sets the channel number display when there are no incoming remote
control keys, which improves reaction on repeated keys.
- The actual tuning is now done in a separate thread, which makes zapping through the
channels a lot faster and no longer gets stuck on channels that don't broadcast.
This also makes "Motor-DiSEqC" work (thanks to Reinhard Walter Buchner for his help
in testing this). Since switching channels now no longer explicitly waits for a
channel lock in the foreground thread, the "panic level" mechanism is no longer
used (maybe we don't need it any more, anyway).
- The keyboard is now by default always active to control VDR. The 'make' option
REMOTE=KBD is therefore obsolete. When compiling VDR with REMOTE=RCU or REMOTE=LIRC,
the keyboard can thus now be active together with the remote control. If you want
to build VDR _without_ keyboard support you can set NO_KBD=1 in the 'make' call.
Since the keyboard codes are now different from the ones used previously (which
were mapped by the 'ncurses' library) you will need to go through the "Learning
keys" procedure again. To do so, either delete the file /video/remote.conf or
remove the KBD.* entries from it before starting this version of VDR.
(Thanks to Thomas Sailer for pointing out how to set the terminal parameters to
read from the keyboard).
- The 'ncurses' library is now only necessary when compiling VDR with DEBUG_OSD=1.
|
|
- Added new entries to 'ca.conf'.
- Fixed closing unused PID handles (thanks to Stefan Schluenss for reporting this
one).
- Added more examples to 'diseqc.conf' (thanks to Oliver Endriss).
- Fixed disabling multiple recordings on a single DVB card (comment out the definition
of the macros DO_REC_AND_PLAY_ON_PRIMARY_DEVICE and DO_MULTIPLE_RECORDINGS in
dvbdevice.c).
- Plugins can now have their very own OSD setup in the object they return from
a call to cPlugin::MainMenuAction(). In order to implement this, the return type
of cPlugin::MainMenuAction() had to be changed from (cOsdMenu *) to (cOsdObject *).
So in case you are compiling an existing plugin with this version of VDR and you
get an error message, simply change cOsdMenu to cOsdObject in the plugin's source
for the MainMenuAction() function.
Plugin authors who have so far (ab)used the cControl mechanism to implement their
own raw OSD should take a look at the new demo plugin 'osddemo'. It implements
a very primitive game that shows how a plugin can have its own raw OSD. Especially
look into cLineGame and see how it implements the Show() function. See also
the chapter on "User interaction" in PLUGINS.html.
- Added three new fields to the lines in 'channels.conf': NID, TID and RID. NID and
TID are the Network and Transport Stream IDs, respectively. RID is an additional ID
that can be used to tell apart channels that would otherwise be indistinguishable.
This is typically the case with radio channels, which may have the same NID, TID
and SID, but different "radio IDs". This new field is therefore called RID ("radio
ID"). Currently NID and TID are not yet used by VDR and should always be 0. The
RID is actually used when building the "unique channel ID", so if you have channels
in your 'channels.conf' file that cause error messages when loading, you can set
the RIDs of these channels to different values.
When reading an old 'channels.conf' these new fields will be automatically
initialized to 0 and once the file is written back to disk they will be appended
to the channel definitions.
Thanks to Régis Bossut for pointing out that with some providers the channels can
only be distinguished through the RID.
- The "unique channel ID" now contains an optional 5th part (the RID). See man vdr(5).
- Updated 'channels.conf.cable' and made some channels unique using the new RID
(thanks to Andreas Kool for pointing out the problems).
- Made some channels unique in 'channels.conf.terr' using the new RID.
- Extended the '-l' option to allow logging to LOG_LOCALn (n=0..7) by writing, for
instance, '-l 3.7' (suggested by Jürgen Schmidt).
- Now deleting stale lock files if they have a time stamp that is outside the window
'now +/- LOCKFILESTALETIME'. This improves things in cases where the system time
makes far jumps, so that a lock file might end up with a time stamp that lies
in the distant future (thanks to Oliver Endriss).
|
|
- Fixed saving the polarization parameter of channels that have a number in the
'source' parameter (thanks to Peter Seyringer for reporting this one).
- Updated 'channels.conf.terr' (thanks to Andy Carter).
- Updated 'channels.conf.cable' (thanks to Achim Lange).
- First step towards a "unique channel ID". The channel ID is a human readable
string, made up from several parameters of the channel's definition in the file
'channels.conf' (see man vdr(5) for details).
In order for the "unique channel ID" to work, all channel definitions now must
be unique with respect to the combination of their Source, Frequency and SID
parameters. You may have to fix your 'channels.conf' manually if there are error
messages in the log file when loading it. BE SURE TO MAKE A BACKUP COPY OF YOUR
'channels.conf' AND 'timers.conf' FILE BEFORE SWITCHING TO THIS VERSION, AND CHECK
VERY CAREFULLY WHETHER YOUR TIMERS ARE STILL SET TO THE RIGHT CHANNELS!
When reading an existing 'timers.conf', the channels will be identified as before
by their numbers. As soon as this file is written back, the channel numbers will
be replaced by the channel IDs. After that it is possible to manually edit the
'channels.conf' file and rearrange the channels without breaking the timers.
Note that you can still define new timers manually by using the channel number.
VDR will correctly identify the 'channel' parameter in a timer definition and
use it as a channel number or a channel ID, respectively. Also, the SVDRP commands
that return timer definitions will list them with channel numbers in order to
stay compatible with existing applications.
The channel ID is also used in the 'epg.data' file to allow EPG information from
different sources to be stored, which would previously have been mixed up in case
they were using the same 'service ID'. Note that the contents of an existing
'epg.data' file from a previous version will be silently ignored, since it doesn't
contain the new channel IDs. When inserting EPG data into VDR via SVDRP you now also
need to use the channel IDs.
Currently the EPG data received from the DVB data stream only uses the 'Source'
and 'Service ID' part of the channel ID. This makes it work for channels with
the same service IDs on different sources (like satellites, cable or terrestrial).
However, it doesn't work yet if the service IDs are not unique within a specific
source. This will be fixed later.
- Added missing SID parameters to 'channels.conf'. Some channels have been removed
since they are apparently no longer broadcasted.
- Removed dropping EPG events from "other" streams that have a duration of 86400
seconds or more (was introduced in version 1.1.10). This has become obsolete by
the modification in version 1.1.13, which fixed fetching the current/next information
to handle cases where the duration of an event is set wrongly and would last beyond
the start time of the next event. Besides, the change in 1.1.10 broke handling EPG
data for NVOD channels.
- Fixed a compiler warning regarding cMenuChannels::Del() and MenuTimers::Del() hiding
the base class virtual functions.
|
|
- Completely switched to the new CVS HEAD version of the linux-dvb driver.
The NEWSTRUCT compile time switch is now obsolete. The required driver is now
the CVS HEAD version dated 2002-11-01 or later.
- Adjusted the INSTALL file to the 1.1.x version.
- Only accepting key presses from the current remote control when learning (thanks to
Oliver Endriss).
- Fixed the EPG scanner, which broke 'Transfer Mode' as soon as it kicked in
(thanks to Oliver Endriss for reporting this one).
- Fixed handling audio tracks in cDvbDevice.
- Updated channels.conf.terr (thanks to Uwe Scheffler).
- Fixed displaying the group separators in the channel display (thanks to Martin
Hammerschmid for pointing out this one).
- The Makefile now includes the file Make.config (if present in the VDR source
directory), which allows the user to overwrite several settings with individual
values (suggested by Andreas Schultz). The VDR distribution archive does not
contain this file in order to not overwrite a user defined file. There is a
Make.config.template which contains the default values of the macros the user
can overwrite.
- Since there have been changes to the 'newplugin' script authors of plugins
may want to newly create their plugins' Makefiles with the new version of this
script, and adapt them to their individual needs (make sure you don't overwrite
your existing plugin directory - make a backup copy first!).
- Fixed reading EPG data via the SVDRP command PUTE (it changed the current
service ID).
- Fixed closing all dup'ed file descriptors in cPipe.
- Implemented a plugin interface for additional audio processing (see PLUGINS.html
under "Dolby Digital").
The functionality of the '-a' command line option has been reactivated.
Since the author doesn't have any Dolby Digital equipment this may or may not
work as expected. There may still be some places where a call to cAudios::Clear()
or cAudios::Mute() is necessary. Those with Dolby Digital equipment should please
take a look at this and maybe send patches.
Replaying Dolby Digital in ways other than through VDR's '-a' option will have to
be implemented as plugins. Those who have written patches for VDR version 1.0.x
should convert their work into the proper plugins for version 1.1.x.
Note to authors of cPlayer derived plugins: please read the modified comments
in device.h regarding the member functions cDevice::Clear(), cDevice::Mute() and
cDevice::PlayAudio(). Derived classes must call these base class member functions
to make sure all registered cAudio objects are properly handled. Also note that
the return type of cDevice::PlayAudio() has been changed to 'void', since this
function always has to accept the entire data block immediately and there is
nothing that could be reasonably done in case an error occurs in one of the
cAudio objects.
- Now checking the driver's DVB_API_VERSION in dvbdevice.h. Since VDR now requires
a driver dated 2002-11-01 or later the MIN_DVB_DRIVER_VERSION_FOR_TIMESHIFT and
DVB_DRIVER_VERSION stuff has been replaced with DO_REC_AND_PLAY_ON_PRIMARY_DEVICE,
which can be used to disable simultaneous recording and replaying on the primary
DVB device in case there are problems with this.
|
|
- Fixed some faulty default parameter initializations (thanks to Robert Schiele).
- Added further satellites to 'sources.conf' (thanks to Reinhard Walter Buchner
and Oliver Endriss).
- Updated Finnish OSD texts (thanks to Jaakko Hyvätti).
- Fixed a small glitch when switching channels (thanks to Dennis Noordsij for
reporting this one).
- Fixed handling multiple 'CaCaps' entries in 'setup.conf'.
- Group separators in 'channels.conf' may now be given like ':@201 My Channels',
where '@201' indicates the number to be given to the next channel. This can be
used to create 'gaps' in the channel numbering (see 'man 5 vdr'). BE CAREFUL
TO UPDATE YOUR 'timers.conf' ACCORDINGLY IF INSERTING THIS NEW FEATURE INTO YOUR
'channels.conf' FILE!
- Timers now internally have a pointer to their channel (this is necessary to
handle gaps in channel numbers, and in preparation for unique channel ids).
- Fixed slow reaction on SVDRP input (thanks to Guido Fiala for reporting this one).
- Added KI.KA to channels.conf.cable (thanks to Robert Schiele).
- Frequency values for cable and terrestrial channels in 'channels.conf' can
now be given either in MHz, kHz or Hz. The actual value given will be multiplied
by 1000 until it is larger than 1000000.
- Fixed skipping unavailable channels when zapping downwards.
- Fixed checking the Ca() status of a cDevice (thanks to Stefan Huelswitt).
- Fixed switching audio tracks in 'Transfer Mode' on the primary DVB device
(thanks to Steffen Barszus and Stefan Huelswitt for reporting this one and
helping to fix it).
- Fixed channel switching in case of an active 'Transfer Mode' on the primary
device ('Transfer Mode' is now launched with priority '-1').
- Fixed a ternary expression in dvbspu.c.
- Fixed handling 'Transfer Mode' on single device systems when recording an
encrypted channel (thanks to Stefan Huelswitt).
- Fixed blocking replaying in case an encrypted channel is being recorded on
the primary device.
- Now the name of the remote control is displayed when learning the keys.
- Fixed learning remote control keys in case there is more than one remote
control (thanks to Oliver Endriss for reporting this one).
- Implemented additional dedicated keys for "Play", "Pause", "Stop", "Record",
"FastFwd", "FastRew", "Channel+" and "Channel-". If your remote control supports
any of these keys you can delete your 'remote.conf' file and restart VDR to
go through the key learning procedure again in order to assign these new keys.
See MANUAL for more information.
Authors of player plugins should update their ProcessKey() functions so that
the new player keys have the same functionality as the "Up", "Down", "Left",
"Right" and "Blue" keys, respectively. Note that the existing functionality
of these keys should by all means be retained, since VDR (and any plugins)
shall be fully usable with just the basic set of keys. These new keys are only
for additional comfort in case the remote control in use supports them.
- Implemented new keys to directly access the VDR main menu functions "Schedule",
"Channels", "Timers", "Recordings", "Setup" and "Commands". If your remote
control provides keys you want to assign these functions to, you can delete
your 'remote.cof' file and restart VDR to go through the key learning procedure
again in order to assign these new keys. See MANUAL for more information.
- The new configuration file 'keymacros.conf' can be used to assign macros to
the color buttons in normal viewing mode, as well as to up to 9 user defined
keys. See MANUAL and man vdr(5) for more information. The default 'keymacros.conf'
implements the functionality of the "color button patch".
- Fixed a crash when learning the keys of several remote controls and pressing
buttons of those that have already been learned (thanks to Oliver Endriss for
reporting this one).
|
|
- Added cDevice::DeviceNumber() to get the number of a device, not counting any
gaps that might be in the index count.
- Fixed fetching the current/next information to handle cases where the duration
of an event is set wrongly and would last beyond the start time of the next
event.
- Adapted type names to the new HEAD version of the driver (which the previous
NEWSTRUCT branch has been merged into). Note that to use this driver version
you still need to add NEWSTRUCT=1 to the make call when building VDR. You
need a HEAD version of the LinuxDVB driver dated 2002-10-11 or later to compile
VDR with NEWSTRUCT=1.
- Fixed radio channels in channels.conf.cable (thanks to Robert Schiele and Uwe
Scheffler).
- Fixed switching the video format in the Setup/DVB menu (thanks to Uwe Scheffler
for reporting this one).
- Reactivated full handling of second audio PID (even in 'Transfer Mode').
- Fixed a crash when closing down with remote control plugins (thanks to Oliver
Endriss helping to debug this one).
- Commands in the file 'commands.conf' can now have a '?' at the end of their
title, which will result in a confirmation prompt before executing the
command.
- Changed a few leftover 'new char[...]' to MALLOC(char, ...).
- If a command executed from the "Commands" menu doesn't return any output, the
OSD will now be closed automatically.
- The SVDRP command PUTE now triggers an immediate write of the 'epg.data' file
(suggested by Gerhard Steiner).
- The new configuration file 'reccmds.conf' can be used to define commands that
shall be executed from the "Recordings" menu; see MANUAL and 'man vdr(5)' for
details (suggested by Gerhard Steiner).
|
|
- Fixed a missing Flush() call in the remote control learning procedure (thanks
to Oliver Endriss).
- Modified channel handling to cover all parameters necessary for DVB-C and DVB-T
(see man vdr(5) for the meaning of the additional parameters stored in the field
previously named 'polarisation'). Thanks to Uwe Scheffler and Andy Carter for testing.
If you have a system with different kinds of DVB cards, like DVB-T and DVB-C,
for instance, there is no more need to distinguish the channels through the
'Ca' parameter in order to assign them to the various DVB cards. This is now
taken care of by the "source" parameter. So a channel marked as "terrestrial",
for example, will only be received on DVB-T cards.
Note that the cChannel class has been moved into a separate file (channels.[ch]),
and that all data members have been made private and are now only accessible
through member functions. You may have to change any plugin code that accesses
cChannel data accordingly.
- The new configuration file 'sources.conf' contains the various signal sources
(satellites, cable and terrestrial) which are used in 'channels.conf' and
'diseqc.conf' (thanks to Reinhard Walter Buchner for adding some satellites to
'sources.conf' and Oliver Endriss and Lauri Tischler for testing and debugging).
- The 'diseqc' parameter in the channel definitions has been redefined to hold the
"source" of the given channel (which can be either a satellite, cable or terrestrial).
For compatibility with channels.conf files from older versions, numeric values in
this parameter will be tolerated, but they have no meaning. If you want to use
DiSEqC you will need to replace these old values with the proper source identifiers
defined in the new configuration file 'sources.conf'. See how this is done in the
'channels.conf' file that comes with the VDR package.
- The new configuration file 'diseqc.conf' can be used to set up the individual
diseqc configuration (see man vdr(5) for a description of the file format).
- The "Edit channel" menu has a new entry "Source:" in which the source of this
channel can be selected (either a satellite, cable or terrestrial). The set of
parameters at the end of this menu will change according to the type of source.
- The "Use DiSEqC" parameter in the "Setup/LNB" menu has been moved to the beginning
of the list and disables the rest of the parameters when set to "yes", since these
are now only meaningful if DiSEqC is _not_ used.
- Removed some unnecessary #includes from eit.c and changed cMenuRecordings::Del()
to cMenuRecordings::Delete() to avoid warnings in gcc-3.2 (thanks to Andreas
Schultz for pointing this out).
- Improved skipping channels that are (currently) not available (thanks to Stefan
Huelswitt).
- Updated channels.conf.terr and channels.conf.cable (thanks to Uwe Scheffler).
- Fixed a bug when pressing the "Blue" button in the main menu without having
displayed it (thanks to Oliver Endriss for reporting this one).
|
|
- Fixed an incomplete initialization of the filter parameters in eit.c (thanks
to Jeremy Hall).
- Fixed the 'newplugin' script for use with the NEWSTRUCT driver (thanks to
Andreas Schultz for reporting this one). If you have already created a plugin
directory and Makefile with 'newplugin', please apply the following patch to it:
-------------------------------------------------------
--- Makefile 2002/06/10 16:24:06 1.4
+++ Makefile 2002/09/17 15:36:36 1.5
@@ -15,7 +15,12 @@
### The directory environment:
+ifdef NEWSTRUCT
+DVBDIR = ../../../../DVB/include
+DEFINES += -DNEWSTRUCT
+else
DVBDIR = ../../../../DVB/ost/include
+endif
VDRDIR = ../../..
VDRINC = $(VDRDIR)/include
LIBDIR = ../../lib
@@ -34,7 +39,7 @@
INCLUDES = -I$(VDRINC) -I$(DVBDIR)
-DEFINES = -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
+DEFINES += -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
### The object files (add further files here):
-------------------------------------------------------
This is the diff for the 'setup' example that comes with VDR, so your line
numbers may be different.
- Added a missing 'public' keyword in device.h (thanks to Martin Hammerschmid).
- Fixed a race condition when starting 'Transfer Mode'.
- Rearranged the remote control key handling to allow plugins to implement
additional types of remote controls (see PLUGINS.html, section "Remote Control").
The previously used files 'keys.conf' and 'keys-pc.conf' have been replaced
by the file 'remote.conf', which holds the key definitions of all remote controls.
- The LIRC remote control keys are now handled just like the keyboard and RCU keys.
This means that you can use the lircd.conf file as is for your remote control,
without the need of editing it to make the key names the same as used in VDR.
When first starting VDR it will go into the "Learning keys" mode and ask you
to press the various keys. The resulting key assignment will be stored in
the file 'remote.conf'.
Since I have no way of testing the LIRC support, I hope I didn't break it in
the process...
- While learning the remote control keys it is now possible to press the 'Menu'
key to skip the definition of keys that are not available on your particular
RC unit.
- Fixed handling DVD subtitles in the SPU decoder (thanks to Andreas Schultz).
- Avoiding restarts due to 'panic level' when switching channels on the primary
device during EPG scan.
|
|
- Removed a superfluous error message from cLockFile::Unlock() (reported by
Helmut Auer).
- Fixed starting a recording of the current channel with only one DVB card
(thanks to Stefan Huelswitt for his help).
- A previous 'Transfer Mode' is now automatically re-started after a replay
stops.
- Only calling cStatus::MsgChannelSwitch() if a channel is actually going to
be switched or has actually been switched successfully (thanks to Stefan
Huelswitt).
- The EPG now drops events from "other" streams that have a duration of 86400
seconds or more (this avoids bogus entries like "PROGRAMMES ALLEMANDS").
- Fixed opening /dev/video in cDvbDevice::GrabImage() in case of NEWSTRUCT
driver (thanks to Andreas Schultz).
- Added a missing StripAudioPackets() to cDvbPlayer::Action() (thanks to
Stefan Huelswitt).
- Added an EPG bugfix for the latest VOX EPG data format.
|
|
- Fixed the 'newplugin' script to make it name the target for creating the
distribution package 'dist', as stated in the PLUGINS.html documentation.
If you have already created a plugin source directory and Makefile you may
want to check it and replace the 'package' target with 'dist' if necessary.
- Changed device handling for being able to do simultaneous recording and
replay on the same device (Time Shifting). In order for this to work you need
to use a driver with a firmware version that has this feature implemented.
- cDevice::ProvidesCa() is no longer virtual. The new function
cDevice::ProvidesChannel() is now used to determine whether a device can
receive a given channel, and by default this function returns false. So a
device that is a pure replaying device doesn't need to do anything here.
- Increased the recorder buffer size to 5MB in order to be able to better handle
multiple recordings.
- Implemented cTSBuffer for better handling TS packet buffering in derived
cDevice classes.
- Changed the interface if cDevice::GetTSPacket() to avoid unnecessary copying
of data.
- Removed cDevice::Channel(), since this makes no more sense with devices
receiving multiple channels.
- Switching through channels with the 'Up' and 'Down' keys now skips channels
that are currently not available (for instance because all devices are
recording and these channels are on different transponders).
- Implemented an SPU decoder (thanks to Andreas Schultz).
- Fixed a crash when entering an integer value outside the limits (thanks to
Stefan Huelswitt for reporting this one).
- Added play mode pmAudioOnlyBlack (thanks to Stefan Huelswitt).
|
|
- Fixed replaying the last few seconds of a recording.
- Added some missing #includes to files in libdtv for gcc 3.2 (thanks to Jürgen
Zimmermann).
- Added cDevice::NewOsd() to allow a derived cDevice class to implement its own
OSD capabilities (thanks to Andreas Schultz).
- Added cPalette::AllColors() for plugins that need to get the color entries of
a cPalette (see osdbase.h).
- The new SVDRP command CLRE can be used to clear the entire EPG data (suggested
by Matthias Schniedermeyer).
- Fixed handling one-shot timers that were already recording and had their start
time changed into the future (thanks to Matthias Schniedermeyer for reporting
this one).
|
|
- Adapted VDR to the NEWSTRUCT driver. To use the new driver, compile VDR with
'make NEWSTRUCT=1' (thanks to Holger Wächtler for some valuable advice).
By default it currently still uses the old driver.
- Added some missing #includes (thanks to Martin Hammerschmid).
- Changed the log error message "can't record MPEG1!" to "error in data stream!",
since the mentioning of MPEG1 has irritated many people.
- Consistently using malloc/free and new/delete (thanks to Andreas Schultz).
- Temporarily made cDevice::ProvidesCa() virtual (Andreas Schultz needs this
in his DXR3 plugin).
- cDevice no longer exposes a file handle to cPlayer. A derived cPlayer class
can now call DevicePoll() to see whether the replay device is ready for
further data. A derived cDevice class must implement Poll() and shall
check if any of its file handles is ready for data.
- Implemented several replay modes to allow players that play only audio (thanks
to Stefan Huelswitt).
- Improved cCondVar::Wait() and implemented cCondVar::TimedWait() (thanks to
Stefan Huelswitt).
- VDR no longer gives up if there is no DVB device. It continues to work if
there is at least one device, either a DVB device found by the core VDR code
itself, or a device implemented by a plugin.
|
|
- Re-visited the race condition fix in the cDvbPlayer (thanks again to Andreas
Schultz).
- Changed the VFAT handling to allow users who normally use it but have forgotten
to set it when compiling a new version of VDR to at least see their recordings
made with VFAT enabled (thanks to Christian Rienecker).
- Added some missing teletext PIDs (thanks to Joerg Riechardt).
- Fixed PID handling for cReceiver.
- Added a missing #include to ringbuffer.c (thanks to Martin Hammerschmid).
- Now using CC, CFLAGS, CXX and CXXFLAGS in Makefile.
- Changed the cDevice class to allow plugins to implement their own devices (see
PLUGINS.html for details).
|
