| Age | Commit message (Collapse) | Author |
|---|
|
- The CAM handling has been refactored. Instead of a cCiHandler per device there
is now an abstract cCiAdapter and a cCamSlot. This allows each slot to be
accessed individually.
- The general 15 seconds workaround time before opening the CAM menu has been
removed. If the CAM menu doesn't open within a timeout, the enter menu command
is now sent again.
- If a CAM is reset or pulled and reinserted, it now automatically starts
decrypting the current channel again.
- The Setup/CAM menu now dynamically refreshes its items and displays whether
a CAM is present or ready. The 'Reset' function no longer leaves the menu.
- The CAM menu will now be openend when pressing the Ok key on a slot entry.
- The CAM menu now stays within the current menu context and doesn't close and
reopen the menu every time an option is selected.
- When an encrypted channel is switched to for the first time, VDR now checks
explicitly whether a CAM can actually decrypt that channel. If there is more
than one CAM in the system that claims to be able to decrypt the channel,
they are all tried in turn.
To make this possible, an encrypted channel needs to be received in Transfer
Mode when it is switched to for the first time, so that VDR can determine
whether the TS packets are actually decrypted. Once a channel is known to
be decrypted by a particular CAM, the next time it is switched to it will
be shown in normal live viewing mode.
- A cDevice now automatically detaches all cReceiver objects that receive PIDs
that can't be decrypted with the current CAM. A plugin that attaches a cReceiver
to a device should therefore watch the receiver's IsAttached() function to
see if it is still attached to the device.
- The cReceiver constructor no longer takes an 'int Ca' as its first parameter,
but rather a 'tChannelID ChannelID'. This is necessary for the device to be
able to determine which CAM a particular channel can be decrypted with. If the
channel is known to be unencrypted, or a plugin doesn't want to provide the
channel id for other reasons, an invalid tChannelID() can be given.
- The cThread::Start() function now waits until a previous incarnation of this
thread has actually stopped. Before this it could happen that a thread's
Cancel(-1) function was called and immediately after that it was started again,
but the Start() function still found it to be 'active'.
- The parameter NeedsDetachReceivers in cDevice::GetDevice(const cChannel *Channel, ...)
has been removed. A call to this function will automatically detach all receivers
from the device if it returns a non-NULL pointer.
- The cTimeMs class now accepts an initial timeout value in its constructor.
- A CAM is now explicitly instructed to stop decrypting when switching away from
an encrypted channel.
- If the CAM in use can decrypt several channels at the same time, VDR can
now make use if this capability. Whether or not a CAM can decrypt more
than one channel is determined by sending it an initial empty QUERY command
and testing whether it replies to it.
- Ca values in the range 0...F in channels.conf can still be used to assign a channel
to a particular device, but this will no longer work with encrypted channels because
without valid CA ids VDR can't decide which CAM slot to use. However, since VDR now
automatically determines which CAM can decrypt which channel, setting fixed
channel/device relations should no longer be necessary.
IF AN ENCRYPTED CHANNEL CAN'T BE DECRYPTED AND YOU HAVE A CA VALUE IN THE RANGE
0...F FOR THAT CHANNEL, SET IT TO 0 (FTA) AND TUNE TO THE CHANNEL AGAIN.
|
|
- Replaced the "quick workaround for additional live audio PIDs" in
cDvbDevice::SetChannelDevice() with an actual solution in
cDvbDevice::SetAudioTrackDevice() in order to prevent sticky PIDs in CAMs,
which caused long switching times or completely blank screens when switching
between encrypted channels on the same transponder (reported by Tomas Berglund).
- Adapted cThread::ThreadId() to recent kernels (thanks to Ville Skyttä).
- Added --remove-destination to the 'cp' command for binaries in the Makefile to
avoid a crash in case a new version is installed on a running system (suggested
by Petri Hintukainen).
- Fixed handling "Ca Info" in case the CAM sends this again if the smart card is
replaced with a different one.
|
|
- Changed the log messages when grabbing an image from 'isyslog()' to 'dsyslog()'
so that they can be suppressed in normal operation mode to avoid clogging the
log file in case this function is used frequently (suggested by Helmut Auer).
|
|
- Fixed the PremiereContentTransmissionDescriptor in 'libsi' (thanks to Stefan
Huelswitt).
- Removed all the compatibility '#if APIVERSNUM...' stuff and instead increased
the API version number - plugins will have to be recompiled.
- Removed the call to pthread_setschedparam(childTid, SCHED_RR, 0) in thread.c,
because it caused a compiler warning with post-2.4 glibc (reported by Ville Skyttä).
Since the third parameter has to be non-null to have any effect, the call was
presumably a NOP, anyway.
- Fixed the 'clean-plugins' target in the Makefile to also remove additional
plugin libraries (thanks to Wayne Keer).
- Applied the fixes to moving and deleting channels from version 1.4.0-2 to the
SVDRP commands MOVC and DELC as well.
- Fixed handling the display of the '*' indicator in the "What's on now/next?"
menu, so that events that haven't been "seen" in the data stream within 30
seconds won't be shown as "running".
- Fixed handling tabbed item display in 'skincurses'.
- Increased the column spacing in the "Recordings" menu (was too small for the
'skincurses' plugin).
- When the 'skincurses' plugin is loaded, it automatically sets the 'curses'
skin as the current one. This doesn't modify the Setup.OSDSkin parameter, so
that after using 'skincurses' (for instance for debugging) the previously
selected skin will be used again.
- Added some log messages when setting the current skin.
- Only making a second attempt to set the current skin at startup if the first
attempt has failed.
- Now switching to non-VPS timers' channels 60 seconds before the timer starts
(if a free device is available), to allow for the updating of EPG data and CA
descriptors before the actual recording starts.
|
|
- Removed leftover LSMOD=... line from 'runvdr'.
- Modified the Makefile to copy additional libraries a plugin might provide (suggested
by Wayne Keer). See PLUGINS.html for details.
- Fixed handling Transfer Mode when replaying Dolby Digital audio and the option
'-a' was given (based on a patch from Werner Fink). To avoid having to increment
the API version, several #if checks have been introduced around this. These will
be removed once the API version actually needs to be incremented.
- Fixed deleting the 'skinDescriptions' in cMenuSetupOSD::~cMenuSetupOSD() (thanks
to Tobias Grimm).
- Fixed calculating the start time of repeated timers with "first day" (thanks to
Udo Richter).
- Now setting a timer's cached start time to 0 after a call to Skip() (thanks to
Udo Richter).
- Fixed handling the running status of EPG events in case the "Schedule" menu is
currently open (i.e. a write lock on the schedules data can't be achieved).
- Fixed handling VPS timers in case the EPG event hasn't been 'seen' in a while.
- Fixed calculating the cache size in cUnbufferedFile::Read() (thanks to Artur Skawina).
- Removed -fPIC from VDR's and libsi's Makefile (suggested by Prakash Punnoor).
- Modifed the device selection to better handle timer conflicts (reported by
Christian Wieninger).
- Avoiding a compiler warning in libsi's TypeLoop::operator[].
- Now processing the "frequency list descriptor" (based on a patch from Anssi Hannula).
- Improved the repeat function for LIRC remote controls (thanks to Joerg Riechardt).
- Fixed moving channels, which sometimes stopped the current replay session
(reported by Mirko Dölle).
- Fixed deleting channels in case the current channel's number changes (reported
by Mirko Dölle).
|
|
- Fixed handling broken PMT records (thanks to Marcel Wiesweg for pointing out how
to detect these).
- Added a missing "Button$" for the Timer button and "Key$" in skinclassic.c
(thanks to Rolf Ahrenberg).
- Fixed broken entry 'A111.1W' in sources.conf (reported by Luca Olivetti).
- Replaced the obsolete entry 'S21.5E' in the default 'diseqc.conf' with 'S13.0E'
(reported by Ville Skyttä).
- Fixed learning keys when VDR is already running (thanks to Jurij Retzlaff).
- Fixed handling the system time transponder setting in the Setup/EPG menu, which
was broken by the min/max fix in cMenuEditIntItem.
- VPS timers now record only events that have exactly the given start time.
This fix also implements recording several subsequent events that have the
same VPS time (like a sports event with intermittent news breaks).
- When checking for timers that have entered the "VPS margin", any free devices are
now used to switch to the needed transponder. This improves cases where more than
one VPS timer is about to start.
- Fixed handling the VPS margin in case the event's duration is shorter than the
margin.
- Fixed handling VPS timers in case the primary device needs to switch to the
timer's transponder.
- Now avoiding the 'actual' device when starting a recording, so that a Transfer
Mode for live tv isn't interrupted.
- Fixed a typo in skins.h (thanks to Alexander Rieger).
- cSkins::QueueMessage() called from a background thread with an empty message
now clears all messages that have been previously queued by that thread and have
not yet beed displayed (thanks to Alexander Rieger).
- Fixed handling the color button texts when switching from the 'Schedule' menu of
a channel without EPG info to the 'What's on now' menu (reported by Rolf
Ahrenberg).
- cMenuEditIntItem and cMenuEditChanItem can now be given strings to label the
minimum and maximum values, and the case that no channel has been selected,
respectively.
- The initial channel and volume can now be defined in the "Setup/Miscellaneous"
menu (based on a patch from Thomas Keil).
- When hitting the end of a recording in fast forward mode, VDR no longer switches
back to normal speed if the recording is already finished (thanks to Reinhard
Nissl).
- No longer calling cPlugin::ProcessArgs() if VDR is run with the --help or
--version option, to avoid error messages from plugins (reported by Udo Richter).
- Now checking whether there is any text before calling cStatus::MsgOsdTextItem()
(reported by Joachim Wilke).
|
|
- Fixed updating the "Info" button in the "Timers" menu.
- Reduced the number of events to actually check when setting events to timers.
- cMenuEditIntItem now checks the given value and forces it to be between the
given min and max limits.
- The status changes of EPG events are now logged for all channels that have timers.
- Removed the log message "deleting plugin: ..." when shutting down VDR (thanks to
Christoph Haubrich for reporting that this is irritating when calling "vdr --help").
- Fixed cReadLine::Read() for lines that end with the infamous "\r\n" (thanks to
Rolf Ahrenberg).
- Fixed cDvbDevice::SetAudioBypass() in case setTransferModeForDolbyDigital is false
(thanks to Werner Fink).
- Updated 'sources.conf' (thanks to Oleg Roitburd).
- Fixed the shutdown timeout (thanks to Alexander Wenzel).
- Only calling RemoveEmptyVideoDirectories() once in case a recording has been
deleted (reported by Hardy Flor).
- Fixed deleting recordings that have been removed externally when running out of
disk space (reported by Jan Lenz).
- Fixed handling repeating VPS timers (they stopped recording too early).
- Timer log messages now show "VPS" if this is a VPS timer.
- Fixed getting the present EPG event in case none is currently 'running' (it
then returns the one that just ended).
- Fixed calling a plugin's main menu function while a message is being displayed
(reported by Helmut Auer).
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
- Made cMenuRecordings::GetRecording() 'protected' (suggested by Marius Heidenstecker).
- Speeded up cRemux::ScanVideoPacket() (thanks to Reinhard Nissl).
- Enhanced logging EPG event data.
- Fixed format string handling (thanks to Darren Salt).
- The new function cDevice::ForceTransferMode() can be used to force the primary
device into transfer mode (thanks to Reinhard Nissl).
- The 'version' of EPG events is now ignored when reading EPG data from 'epg.data'
or via SVDRP/PUTE to avoid problems with double EPG events.
- The 'running status' of EPG events is now only set to SI::RunningStatusNotRunning
for events before the present event.
- Fixed some #include sequences.
- Single shot VPS timers are now only considered 'expired' if their associated
EPG event has been explicitly set to SI::RunningStatusNotRunning.
- The check for timers to be deleted is now done only every 30 seconds.
|
|
- Removed an unnecessary toFile->SetReadAhead() from cutter.c (thanks to Artur
Skawina).
- The "Back" key now restores the original string when pressed while editing a
string item (suggested by Markus Hahn).
- Now stopping scanning the video directory if there are too many levels of
symbolic links, which might indicate a recursive link loop (based on a patch
from Helmut Auer).
- Improved OSD area handling in cDvbSpuDecoder (thanks to Marco Schlüßler).
- Now logging the description (if present) in case a thread is canceled (suggested
by Marco Schlüßler).
- cMenuText now uses the given font (thanks to Rolf Ahrenberg).
- The ST:TNG skin now uses the fixed font if requested when displaying texts.
- Fixed some typos in the CONTRIBUTORS file (thanks to Frank Krömmelbein).
- Changed offset and size handling in 'libsi' from 'unsigned' to 'signed', so that
overflows can be better detected (thanks to Marcel Wiesweg).
- Checking data size in CaDescriptor::Parse() and LinkageDescriptor::Parse() of
'libsi' to avoid crashes with invalid data (thanks to Marcel Wiesweg).
- Made CharArray::DataOwnData::assign() in 'libsi' more robust against invalid
data (suggested by Oliver Endriss). Also changed CharArray::DataOwnData::Delete()
so that it sets 'size' and 'data' to 0.
- Now resetting the channel number if the number entered through the numeric keys
exceeds the maximum channel number (thanks to Rolf Ahrenberg).
- The language code in the 'X' component records of EPG data can now consist of
two codes, separated by '+'.
- If a recording starts and there is no EPG data available for the recorded channel,
the 'X' audio component records for the 'info.vdr' file are now generated from the
channel's PID data.
- Externally provided EPG data (with table ID 0x00) now gets its component
descriptors set from the broadcast data, so that language codes and descriptions
are available (suggested by Andreas Brugger).
- When setting the audio track descriptions, the language codes are now also set
in case this is a replay session (based on a patch from Rolf Ahrenberg).
- If a recording starts and the channel's audio PID data has more language code
information than the EPG's component data, the code from the channel is taken.
- Fixed handling DPID when deciding whether to switch to 'Transfer Mode' (thanks
to Marco Schlüßler).
- Fixed replaying recordings of radio channels with many audio tracks (thanks to
Reinhard Nissl).
- Added a comment to tChannelID::nid, explaining that is is actually the "original"
network id.
|
|
- Removed leftover 'needsBufferReserve' variable from cTransfer (thanks to Marco
Schlüßler).
- Fixed setting "No title" for broken event data (reported by Ronny Kornexl).
- Fixed channel up/down switching on single card systems (reported by Stefan
Huelswitt).
- Fixed handling "pending" timers that blocked others that actually could record
(reported by Thomas Koch).
- Speeded up cVideoRepacker (thanks to Reinhard Nissl).
- Added an 'Id' parameter to cDevice::PlayAudio() to allow plugins to easier
process the audio data (thanks to Marco Schlüßler).
- Added Czech language texts (thanks to Vladimír Bárta).
Plugin authors may want to add the new entries to their I18N texts and contact
the translators to have their texts translated. Note that there are now 21
different OSD languages, so please make sure you have 21 versions for each of
your texts.
- Updated the Polish OSD texts (thanks to Jaroslaw Swierczynski).
- Fixed auto advance in string entry fields when pressing Up/Down in insert mode
(reported by Udo Richter).
- Fixed handling the "Setup/OSD/Menu button closes" option when set to 'yes' in
case a replay is active (thanks to Udo Richter).
- Improved cUnbufferedFile; USE_FADVISE is now defined in tools.c by default, so
if you don't want to use "fadvise" you need to comment out that line (thanks to
Artur Skawina).
- Fixed a missing ',' in the Swedish OSD texts (thanks to Arthur Konovalov).
- cDevice::Transferring() can now be used to determine whether the (primary)
device is currently playing in Transfer Mode (based on a suggestion by
Reinhard Nissl).
- The 'runvdr' script no longer uses the $VDRUSR environment variable to set
the user id under which 'vdr' shall run. Just add the '-u username' option
when you call 'runvdr'.
- Fixed multiple entries of the same subdirectory in the "Recordings" menu
(reported by Christian Jacobsen).
- Enabled generating a core dump if VDR is run with a different user id (thanks
to Ville Skyttä).
- Fixed handling the "Blue" key in the "Schedule" menu for the current channel
(thanks to Rolf Ahrenberg).
- Renamed the Makefile target 'plugins-clean' to 'clean-plugins' (suggested by
Sebastian Frei).
- Made all font and image data 'const' (thanks to Darren Salt).
- Fixed scrolling with Up/Down in case there are non-selectable items at the
beginning or end of the menu (reported by Helmut Auer).
- Added cSkin::GetTextAreaWidth() and cSkin::GetTextAreaFont(), so that a plugin
that wants to do special text formatting can do so (thanks to Alexander Rieger).
|
|
- EPG events from epg.data or SVDRP's PUTE command now have their Title set to
"No Title" if none was set.
- Fixed checking toFile in cCuttingThread::Action() (found in a larger patch from
Artur Skawina).
- Fixed a crash when pressing '0' in the "Schedule" menu on a channel that doesn't
have any EPG data (reported ny Alexander Hans).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Fixed a missing ',' in the Greek OSD texts (thanks to Arthur Konovalov).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Fixed handling the tfRecording flag when reading timers (bug reported by Andreas
Mair).
- Now checking whether the channel exists before setting the PMT filter in
cPatFilter::Process() (thanks to Thomas Bergwinkl).
- Now trying to reestablish the connection to the LIRC daemon in case it breaks
(thanks to Ville Skyttä).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed channel switching with the Down (Up) key in case the current channel is
already the first (last) in the list (reported by Frank Krömmelbein).
- Removed the "buffer reserve" in Transfer Mode - it's no longer necessary with
recent driver/firmware versions.
- The epg.data file is now written when VDR exits (suggested by Daniel Karsubka).
- Fixed cTimers::GetNextActiveTimer() so that it won't return an expired timer
(reported by Rolf Ahrenberg).
- Changed DVBS_TUNE_TIMEOUT and DVBC_TUNE_TIMEOUT to 9000ms to avoid problems with
channels that have low symbol rates (reported by Suur Karu).
- Fixed displaying the current audio track in the channel display.
- When reading epg.data (or data from PUTE), the version number of events with
table IDs smaller than 0x50 is now ignored because otherwise the current
running status would not be set after a restart of VDR.
- Implemented a timeout for remote controls that don't deliver "repeat" keypresses
very fast (based on a suggestion by Luca Olivetti; problem with the new handling
of k_Repeat keypresses in channel switching reported by Udo Richter).
- When looking for the present or following EPG event, the running status is now
always taken into account.
- Now initializing the channels' schedule pointers when reading the epg.data file,
so that the first WhatsOn menu will come up faster.
- If a shutdown is requested, but the shutdown script doesn't actually halt the
system, it is now tried again after 5 minutes (suggested by Helmut Auer).
- Separated the 'install' target into several individual targets; renamed the
'plugins-install' target to 'install-plugins' (thanks to Helmut Auer).
|
|
- The SVDRP command LSTT now accepts the new option 'id' to have the channels
of the timers listed with their unique channel ids instead of their numbers
(suggested by Matthias Schniedermeyer).
- Added a missing #include <linux/unistd.h> to thread.c (thanks to Ville Skyttä).
- Fixed the "plugins-clean" and "plugins-install" targets in the Makefile (thanks
to Andreas Brachold).
- Fixed handling "more than 3 byte" key sequences in cKbdRemote::ReadKeySequence()
(thanks to Peter Bieringer). If you are using the PC keyboard as remote control
input you may need to make VDR newly learn the keys by removing the remote.conf
file.
- To avoid problems with access rights when VDR shall run as 'root' it now skips
all SetCaps() and SetUser() calls when it is started as 'root' and "-u root"
is given.
- Added missing i18n entry for the "Timer" button (thanks to Ville Skyttä)
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Making the "Menu" key behave consistently has not been well received by several
users, so the new option "Setup/OSD/Menu button closes" can be used to get the
old behavior back (which also is the default value of this option).
- Dropped the default vdr user. The program now always runs under the user id
it was started from, unless the '-u' option is given and it was started from
the 'root' user. If you want to have a default vdr user, you can activate and
adjust the "VDR_USER = vdr" line in your Make.config file (from the original
patch by Ludwig Nussel).
- Key macros can now be defined for all non-modeless keys (suggested by Mirko Dölle).
- Adjusted the "KEY MACROS" section of vdr.5 to the new plugin calling mechanism
introduced in version 1.3.32.
- Removed the now obsolete "ca.conf" section from vdr.1 (thanks to Ville Skyttä).
- Added missing description of L and R circular polarization to 'diseqc.conf'.
- Added a note about "modprobe capability" to INSTALL (suggested by Patrick Cernko).
- Fixed canonicalizing the file name in the SVDRP command GRAB to allow full path
names (thanks to Stefan Huelswitt).
- Added a missing '-' to the example for viewing a grabbed image on a remote host
(reported by Philippe Gramoullé).
- Made the "What's on now/next?" menus a lot faster by storing a pointer to each
channel's schedule in the cChannel data.
- Made the log messages regarding lost lock of devices "info" instead of "error"
(suggested by Andreas Brachold).
- The SVDRP command GRAB allows file names without extension again (suggested by
Stefan Huelswitt).
- Pressing '0' in the "Schedule" menu now rotates through displaying "This event on
this channel", "This event on all channels" and "All events on all channels".
This can be used to find reruns of a given show, or the episodes of a series.
Note that if there are many channels in your channels.conf, displaying the
"All events on all channels" page may take a while.
- The status markers in the "Schedule" menu are now only updated if a submenu is
closed in which a timer has been modified, which speeds up closing submenus.
- Now only writing Dolby Digital tracks into the 'info.vdr' file of a recording
if Setup.UseDolbyDigital is true (suggested by André Weidemann).
- Added a leading '0' to the day in the DayDateTime() function (thanks to Rolf
Ahrenberg).
- No longer displaying color buttons in the recording info menu if it has been
invoked from a player (reported by Jürgen Schilling).
|
|
- Fixed handling second audio and Dolby Digital PIDs for encrypted channels
(was broken in version 1.3.37).
- Improved TS/PES conversion to better handle lost TS packets (thanks to
Reinhard Nissl).
- Limited the frequency of log messages from the cRepackers.
- Now using the gettid() syscall to get a thread's pid, so that we get a
useful value on NPTL systems (suggested by Johannes Stezenbach).
- Fixed the RCU remote control handling to avoid problems with NPTL (thanks
to Andreas Share for reporting a lockup with the RCU on NPTL systems).
- When displaying the amount of free disk space, the space consumed by
recordings that have been "deleted" but not yet actually "removed" is now
taken into account (suggested by Christian Vogt).
- Now avoiding unnecessary disk access when checking if there are deleted
recordings that need to be removed (reported by Carsten Koch).
- Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now
a deleted recording is retained at least DELETEDLIFETIME seconds before
actually removing it.
The value of DELETEDLIFETIME has been changed to 300. So after (possibly
inadvertently) deleting a recording, there will be at least 5 minutes
in which it can be recovered (unless a new recording immediately requires
the disk space). The count starts again at 0 every time VDR is started.
- Fixed a possible crash when displaying the "Low disk space!" message from
a background thread (thanks to Christof Steininger).
- Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler).
- Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground
and background threads won't interfere.
- The main menu now dynamically updates its contents in case an instant
recording or replay stops, etc.
- The version number of EPG events is now also stored in the epg.data file
(thanks to Kendy Kutzner).
- EPG events that are no longer in the currently broadcasted data stream are
now automatically deleted.
- Removed an invalid access to Event->schedule in cSchedule::DelEvent().
- Modified cSchedule::Cleanup() (events are always sorted by time).
- Schedules are now cleaned up once every hour (not only at 05:00).
- The "Schedule" and "What's on now/next?" menus are now updated if a timer
is set or modified.
- cTimer no longer has its own 'schedule' member, it rather uses that of the
event it has been set to.
- The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus
now immediately creates a timer for the selected event and marks it with 'T'.
If the event is already marked with 'T', the "Red" button opens the "Edit
timer" menu for that timer.
- Removing deleted recordings is now done in a separate thread.
- Dropped the unused "stop recording on primary interface" stuff.
- Converting a grabbed image to JPEG is now done with the new function
RgbToJpeg() (see tools.h).
- The SVDRP command GRAB now determines the image type (JPEG or PNM) from the
extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit
'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but
has no meaning any more.
- The function cDevice::GrabImage() no longer writes the grabbed image to a
file, but rather returns a pointer to the image in memory. The wrapper
function cDevice::GrabImageFile() can be used to write the grabbed image
directly to a file. Plugins that used the old version of cDevice::GrabImage()
need to be adapted to the new interface.
- The new class cBase64Encoder (see tools.h) can be used to encode data in
base64 (thanks to Bob Withers for publishing his Base64 class).
- The SVDRP command GRAB now writes the image data to the SVDRP connection
(encoded in base64) if the given file name consists of only the file
extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file
name (based on a suggestion from Darren Salt).
A simple way of viewing a grabbed image on a remote host is:
svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display -
- The new command line option '-g' must be given if the SVDRP command GRAB
shall be allowed to write image files to disk. The parameter to this option
must be the full path name of an existing directory, without any "..", double
'/' or symlinks. By default, or if "-g- is given, grabbing to files is
not allowed any more because of potential security risks.
- Modified the way the SVDRP command GRAB writes the grabbed image to a file
to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino
Peña):
+ The file handle is now opened in a way that it won't follow symbolic links
(suggested by Darren Salt).
+ The given file name is now canonicalized, so that it won't contain any
".." or symlinks (suggested by Darren Salt).
+ Grabbing to files is limited to the directory given in the the command
line option '-g'. By default grabbing to files is not allowed any more.
- Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos).
- Changed all "illegal" to "invalid" in error messages (there's nothing "illegal"
in VDR ;-).
- When started as user 'root' VDR now switches to a lesser privileged user id,
keeping the capability to set the system time (based on a patch from Ludwig
Nussel). By default the user id 'vdr' is used, which can be changed through
the new command line option '-u'. Note that for security reasons VDR will no
longer run as user 'root' (unless you explicitly start it with '-u root',
but this is not recommended!). The 'runvdr' script has been changed to
use the '-u' option.
- Changed the API of the functions cStatus::Recording() and cStatus::Replaying(),
so that they can provide the full file name of the recording. Plugins that use
these (or the related cStatus::Msg...() functions) need to be adapted
(suggested by Andreas Brugger).
- The DVB devices now retune (and, if applicable, resend the DiSEqC data) if
the lock is lost (based on a patch from Reinhard Nissl).
- Fixed handling multi byte key sequences in cKbdRemote (based on a patch from
Jürgen Schneider).
- Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco
Schlüßler).
- Made the static cControl functions thread safe (thanks to Patrick Fischer).
- Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid
warnings with g++ 4.1.0 (thanks to Ville Skyttä).
- Fixed incrementing the 'state' variables in the repacker classes in remux.c
to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä).
- The Makefile now reports a summary of failed plugins (thanks to Udo Richter).
- The cTimer constructor can now take an optional cChannel (suggested by
Patrick Fischer).
- Fixed setting the main thread id if VDR is running as a daemon.
- Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl).
- Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner).
- Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger).
- Now using FE_READ_STATUS to read the current frontend status (suggested by
Holger Wächtler).
- The "Menu" key now behaves consistently. If there is anything on the OSD, it
is closed when the "Menu" key is pressed, and if there is nothing on the OSD,
the "Menu" key opens the main menu (suggested by Luca Olivetti).
- The new option "Setup/OSD/Timeout requested channel info" can be used to turn
off the automatic timeout of the channel display in case it was invoked by
a press of the "Ok" key (suggested by Thiemo Gehrke).
- A message is now given when an instant recording is started (suggested by
Helmut Auer). Actually the code was already there, just commented out - don't
remember why it wasn't active...
- Removed an obsolete "Summary" text from i18n.c and preceded all key definition
texts with "Key$" to avoid duplicates (reported by Lucian Muresan).
- Preceded all button texts with "Button$".
- Removed obsolete "Eject", "Language" and "scanning recordings..." texts.
- Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill).
- Disabled the use of "fadvise" in cUnbufferedFile because there have been
several reports that it causes more problems than it solves (suggested by
Petri Hintukainen). If you want to use "fadvise", you can activate the line
//#define USE_FADVISE
in tools.c.
- Removed unused 'offset' member from cOsdItem.
- In the "Channels" menu the numeric keys now position the cursor to the channel
with the given number (see MANUAL, section "Remote Control Keys", note (3) for
details).
- The "Mark/Move" function in the "Channels" menu now also works in the non-numeric
sort modes.
- The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if
this is a menu.
- The new "Info" key brings up information on the currently viewed programme
or recording. For a live programme this is the same as "Schedule/Ok", i.e. the
description of the current EPG event. For a recording this is the same as shown
by the "Info" button in the "Recordings" menu. Plugins that implement players
can overwrite their cControl::GetInfo() function to show their own info (see
PLUGINS.html for details). Pressing the "Info" key again while the info is
displayed will close the OSD. In order to assign this new key to an existing
remote control setup, the remote.conf file needs to be deleted and VDR has
to be restarted to go through the process of learning the remote control keys.
- Any cReceivers still attached to a cDevice when that device switches to a
different transponder are now automatically detached (suggested by Patrick
Fischer).
- The "flags" of a timer are now handled as an unsigned integer value. In order
to do this, the interface of cMenuEditBitItem also had to be changed.
- In string entry fields (like, e.g., the file name of a recording) the characters
can now be entered by pressing the numeric keys, the same way as on a
telephone keypad (based on the "Easy Input" patch from Marcel Schaeben).
- Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch
from "single shot" to "weekly", followed by the "Right" key (reported by
Andreas Böttger).
- The file 'ca.conf' is obsolete and has been removed.
- Revised all descriptions regarding CICAM.
- Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling.
- Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack()
(thanks to Reinhard Nissl).
- Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo
Schneider).
- Cleaned up some trailing white space.
|
|
- Added compiler options "-fPIC -g" to all plugins (thanks to Rolf Ahrenberg).
- Fixed initializing the day index when editing the weekday parameter of a
repeating timer (thanks to Marco Schlüßler).
- No longer removing superfluous hyphens in EPG data - would become too
language dependent to handle all kinds of exceptions.
- Modified switching to Dolby Digital audio in live mode, if the driver
and firmware can handle live DD without the need of a Transfer Mode (thanks
to Werner Fink). Live DD mode requires a full featured DVB card and a
LinuxDVB driver with firmware version 0x2622 or higher. Older versions will
use Transfer Mode just like before.
- Implemented handling of the "CA PMT Reply" for CAMs (thanks to Marco
Schlüßler for figuring out some obscure length bytes in the CA PMT Reply
data of AlphaCrypt CAMs).
- Some preparations for being able to record several encrypted channels from
the same transponder at the same time (or record and view different encrypted
channels), provided the CAM in use can handle this. This is work in progress
and isn't actively used, yet.
- Fixed SetProgress() in the 'skincurses' plugin in case Total is 0 (reported
by Stefan Huelswitt).
- Added a copy constructor to cString and fixed its assignment operator
(thanks to Holger Brunn).
- The new function Skins.QueueMessage() can be called from a background thread
to queue a message for display. See VDR/skins.h for details.
- The SVDRP command MESG uses the new message queueing facility, so MESG
commands may now be executed at any time, and the message will be displayed
(no more "pending message").
|
|
- Improved responsiveness inside CAM menus.
- Added handling of the 'Close MMI' tag to avoid error log messages with CAMs
that actually use it.
- Now waiting at startup until all DVB devices are ready. This includes having
all CAMs initialized and ready to decrypt, so that no more "channel not
available" happens if VDR is started with the current channel being an encrypted
one, or a timer on such a channel hits right after starting VDR.
- Fixed cVideoRepacker to better handle errors in data (thanks to Reinhard Nissl).
- Fixed cDvbTuner to avoid lockups on NPTL systems (thanks to Marcel Wiesweg).
- Added 'Service' functions to the plugin interface (thanks to Udo Richter).
See PLUGINS.html, section "Custom services" for details.
- Replaced the get/put_unaligned() macros from <asm/unaligned.h> with own inline
functions to avoid problems on platforms that don't provide these (thanks to
David Woodhouse for his help).
|
|
- Fixed a race condition in cTransfer (thanks to Klaus Heppenheimer for reporting this one).
In doing so, the 'active' variables used by the actual derived cThread classes
have been replaced by the cThread::Running() function.
Plugin authors may want to check their derived cThread classes and replace any 'active'
variables the same way as, for instance, done in transfer.c.
- Fixed handling EPG data for time shifted events (thanks to Marco Schlüßler).
- Increased the default value for 'Min. user inactivity' to 300 minutes (suggested
by Helmut Auer).
- Now storing the channel id in the info.vdr file even if there is no EPG info
available (thanks to Andreas Brachold for reporting that there are empty info.vdr
files created in that case).
- Added some 'mkdir -p' to the Makefile's 'install' target (thanks to Wayne Keer).
- Changed the title of the recording info menu (thanks to Rolf Ahrenberg).
- Fixed handling the frame number display if '7' is pressed before the first editing
mark, or '9' after the last one (thanks to Thomas Günther).
- Now discarding any previous numerical input to switch channels if Up, Down, Channel+,
Channel-, Left or Right is pressed (thanks to Wolfgang Rohdewald for reporting a
problem with this).
- Pressing Ok while entering a channel number now immediately switches to that
channel, without waiting for further input.
- Avoiding unnecessary OSD draw operations caused by the audio track description
display in the ST:TNG skin's channel display (thanks to Oliver Endriss for reporting
this).
- Removed the VIDEO_STILLPICTURE_WORKS_WITH_VDR_FRAMES stuff from
cDvbDevice::StillPicture(), since apparently the VIDEO_STILLPICTURE call works.
|
|
- Fixed handling 'page down', which was broken in version 1.3.26 (thanks to Udo
Richter).
- Modified page scrolling behaviour (based on a suggestion by Patrick Gleichmann).
- The new setup option "OSD/Scroll wraps" can be used to activate wrapping around
in menu lists (based on a suggestion by Patrick Gleichmann).
- Removed the NPTL check at startup, since several users have reported that VDR
now runs fine with NPTL.
- Fixed handling VPS timers, so that they only record if the event they are assigned
to actually has the given VPS time.
- Disabled cVideoRepacker in remux.c, because it has caused several problems
during recording. If you want to test (and maybe debug) it, activate the line
//#define TEST_cVideoRepacker
in remux.c.
- When drawing a bitmap to the OSD, the existing palette of the target can now be
replaced with the new one instead of adding the new entries (thanks to Andreas
Regel).
|
|
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed handling 'summary.vdr' files with more than two empty lines (thanks to
Christian Jacobsen for reporting this one).
- Improved resetting CAM connections (thanks to Marco Schlüßler).
- Implemented cVideoRepacker in remux.c to make sure every PES packet contains
only data from one frame (thanks to Reinhard Nissl).
NOTE: currently this doesn't work with MPEG1, so if you use MPEG1 you may want
to change line 1158 in remux.c to
ts2pes[numTracks++] = new cTS2PES(VPid, resultBuffer, IPACKS);
as it was before.
- EPG events without a title now display "No title" instead of "(null)" (thanks
to Rolf Ahrenberg).
- A device can now detach all receivers for a given PID, as is necessary, e.g.,
for the bitstreamout plugin (thanks to Werner Fink).
- Added the year (two digits) to recording dates in LSTR, and thus also in menus
(suggested by Jan Ekholm).
- Fixed the call to Channels.Unlock() in cEITScanner::Process() (thanks to
Reinhard Nissl).
- Fixed handling timers with a day given as MTWTF--@6, i.e. a repeating timer with
first day not as full date, but just day of month (thanks to Henrik Niehaus for
reporting this one).
- Removed an unnecessary #include from osd.c (thanks to Wolfgang Rohdewald).
- Fixed dropping EPG events that have a zero start time or duration, in case it's
an NVOD event (thanks to Chris Warren).
- Fixed handling page up/down in menu lists in case there are several non selectable
items in a row (thanks to Udo Richter for reporting this one).
- Added cOsdMenu::SetCols() to allow adjusting the menu columns.
- Modified cEITScanner::Process() so that it works on systems with only budget cards
or a mix of DVB-S, DVB-C or DVB-T cards.
|
|
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Some cable providers don't mark short channel names according to the standard,
but rather go their own way and use "name>short name". VDR now splits at this
character for cable channels (thanks to Gerhard Steiner for reporting this one).
- Added a check for Setup.DiSEqC in cDvbDevice::ProvidesTransponder(), otherwise
the EPG scan didn't work on systems that don't use DiSEqC (thanks to Michael
Reinelt for reporting this one).
- Made the Makefile patch friendlier (thanks to Ludwig Nussel).
- Made cOsd::isOpen an integer counter to avoid problems with messages when a
cOsdObject uses the raw OSD (thanks to Andreas Regel for reporting this one).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- The file 'summary.vdr' has been replaced with 'info.vdr' and now contains the
information about a recording, in the same format as the events are stored in
'epg.data' (see man vdr(5) for details). Existing summary files can be converted
to the new format by running the Perl script 'summary2info.pl', as in
summary2info.pl /video
(the parameter given has to be the video directory). If there is no 'info.vdr'
file for a recording, an attempt is made to read a 'summary.vdr'.
- The "Summary" button in the "Recordings" menu has been renamed to "Info", and
the page it brings up now shows the recording's information, much like the EPG
event page. Therefore it now no longer uses the skin's SetText() function, but
rather the SetRecording() function. Skin plugins may need to adjust that function
accordingly (see skinsttng.c, for instance).
- The SVDRP command LSTR now lists the recording information in the same tagged
format as the LSTE command lists the EPG data.
- The audio track menu now contains track descriptions when replaying (provided
such descriptions were available in the EPG data when the recording was made,
and are stored in the info.vdr file).
- Avoiding extra blanks at the end of names of instant recordings.
- Removed converting byte order on big endian systems from cDvbOsd::Flush(),
which, according to Johannes Stezenbach and Paavo Hartikainen, is wrong.
- Added cPlayer::DeviceSetVideoDisplayFormat() (thanks to Marco Schlüßler).
- No longer saving the setup in case of a fatal error, to keep the volume level
from being set to a wrong value (thanks to Marco Schlüßler).
- Fixed a possible hangup when ending a replay session while cIndexFile::CatchUp()
is waiting (thanks to Marco Schlüßler).
- The SVDRP command DELR no longer deletes recordings that are currently being
written to by a timer (thanks to Sascha Volkenandt for pointing out this one).
- Pressing the "Play" key in live viewing mode now resumes a previous replay
session (thanks to Mirko Dölle).
- Now dropping EPG events that have a zero start time or duration (thanks to
Oliver Endriss).
- No longer stopping Transfer Mode or replay immediately when the Power button
is pressed (thanks to Rolf Ahrenberg).
- Moved the NPTL and UTF-8 checks after the version and help output (thanks to
Andreas Kool for pointing out that 'vdr --version' failed on an UTF-8 system).
- Made tChannelID::operator==() inline for better performance (thanks to Georg
Acher).
- Introduced cListBase::count for better performance (thanks to Georg Acher).
- cEvent no longer stores the channelID directly, but rather has a pointer to
the schedule it is in.
- Now using hash tables to speed up cSchedule::GetEvent() (partially based on
a patch from Georg Acher).
- Avoiding unnecessary calls to getLength() in libsi/si.c, and avoiding the
'& 0xff' in CRC32::crc32() of libsi/util.c (thanks to Georg Acher).
- Speeded up deleting duplicate channels.
- Fixed listing recordings with empty episode names in the LSTR command (thanks
to Stefan Huelswitt for pointing this out).
- Added cThread::SetPriority() and using it in cSectionHandler::Action() to
reduce the priority of the section handler threads (as suggested by Georg Acher).
|
|
- The setup option "DVB/Video display format" is now only available if "Video format"
is set to "4:3" (suggested by Mikko Salo).
- Updated the Russian OSD texts (thanks to Vyacheslav Dikonov).
- Dropped CA support for the old '-icam' firmware.
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Updated the Swedish OSD texts (thanks to Tomas Prybil).
- Fixed a few French OSD texts that were in the wrong place.
- Improved matching timers to EPG events, especially in case there are several events
with the same VPS time.
- Fixed cDolbyRepacker to allow recording ProSieben HD broadcasts (thanks to Reinhard
Nissl).
- Fixed cDvbDevice::SetVideoDisplayFormat() in case of 16:9 (thanks to Marco Schlüßler).
- The running status of a VPS event is now only taken seriously if that event has been
seen within the last 30 seconds - otherwise recording is done as if no VPS was
available.
- The day of a timer is now stored as a full date in ISO notation ("YYYY-MM-DD") in
'timers.conf' and for the result of the SVDRP command LSTT (based in parts on a
patch by Roman Krenický).
- Some fixes to avoid compiler warnings in gcc 4.0 (thanks to Ville Skyttä for reporting
these).
- Single shot timers are now reliably deleted when they have expired.
- Fixed setting the colored button help after deleting a recording in case the next
menu entry is a directory (thanks to Steffen Beyer).
- Improved falling back to normal recording if the VPS data hasn't been seen for more
than 30 seconds.
- Added a missing cMutexLock to cRemote::HasKeys() (thanks to Wolfgang Rohdewald).
- All log entries regarding timers now contain a short description of the timer.
|
|
- Removed some unneeded code and fixed access to unallocated memory in
cEvent::FixEpgBugs() (thanks to Wolfgang Rohdewald).
- Avoiding unnecessary calls to SetPid() in cDvbDevice::SetAudioTrackDevice()
(thanks to Marco Schlüßler).
- No longer calling EnsureAudioTrack() in cDevice::SetChannel() if a Transfer Mode is
started, to avoid setting the audio PID on the primary device (thanks to Marco
Schlüßler for pointing this out).
- Replaced the call to system("sync") in SpinUpDisk() with fdatasync(f) to avoid
problems on NPTL systems (thanks to Chris Warren for pointing this out).
- Increased POLLTIMEOUTS_BEFORE_DEVICECLEAR in transfer.c to 6 to avoid problems
with the larger buffer reserve (thanks to Marco Schlüßler).
- Fixed the call to SetVideoFormat() in cDvbDevice::cDvbDevice() (parameter is _bool_).
- Added support for setting the video display mode (thanks to Marco Schlüßler).
- The new setup option "DVB/Video display format" can be used to define which display
format to use for playing wide screen video on a 4:3 tv set.
- Changed MAXDPIDS to 16 (8xAC3 + 8xDTS) (thanks to Werner Fink for pointing this out).
- Completed Dutch language texts (thanks to Hans Dingemans).
- Added 'smi' to the Finnish language codes (thanks to Rolf Ahrenberg).
- Fixed ensuring there is a current audio track in case there is only one track
(thanks to Werner Fink for reporting this one).
- Improved automatic audio track selection.
- Keeping the track language codes and descriptions in Transfer Mode (thanks to
Luca Olivetti).
- Fixed handling repeated kAudio keys.
- Improved displaying the the current audio track in the ST:TNG channel display.
|
|
- Fixed cDvbDevice::SetAudioTrackDevice() to avoid a blank screen after switching
back to live mode if a recording is currently active on the primary device.
- Fixed a possible freeze in pause mode in case a device's PlayPesPacket() function
permanently returns 0 (thanks to Reinhard Nissl and Olaf Titz).
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Restricted the "setting audio track" log message to automatic changes during replay.
- Fixed handling Transfer Mode for radio channels (thanks to Andreas Regel for
reporting this one).
- Fixed handling symbolic links in cRecordings::ScanVideoDir() (thanks to Stefan
Huelswitt).
- Completed the Danish OSD texts (thanks to Mogens Elneff).
- Forcing a new resync after a call to cRemux::Clear() (suggested by Marco Schlüßler).
- The cAudio::Play() function now has an additional parameter 'uchar Id' which tells
the function the substream id of the given audio packet, so that a plugin can
take the right action for the various kinds if audio data - which now also includes
"normal" audio with ids 0xC0...0xDF (based on suggestions by Werner Fink and Macro
Schlüßler).
- Removed the "Cleared/PlayPes(NULL, 0)" handling from cTransfer::Action(), since this
is now done when attaching the player to the device (thanks to Marco Schlüßler).
- Making sure the buffer reserve in cTransfer::Action() is re-established after
clearing the buffer.
- Added DeviceClrAvailableTracks() and DeviceSetCurrentAudioTrack() to cPlayer
(thanks to Marco Schlüßler).
- Fixed a typo in detecting UTF-8 (thanks to Reinhard Nissl).
- Now using twice the buffer reserve in cTransfer if the primary DVB card is an
unmodified version with only 2MB of SDRAM, to avoid audio stuttering when
playing Dolby Digital over the DVB card (thanks to Christian Jacobsen and Chad
Flynt for suggestions and experiments in that area).
- Making sure the first audio packet is not dropped when switching to "pre 1.3.19
Dolby Digital compatibility mode".
- The 'plugins-clean' target of the Makefile now only deletes the actual plugin
library files from this version of VDR (suggested by Andreas Brachold).
- Added a missing 'resultSkipped = 0' to cRemux::Clear() (thanks to Marco Schlüßler
for reporting this one).
- The new function cDvbDevice::SetTransferModeForDolbyDigital() can be used by
plugins that implement Dolby Digital output and thus want to prevent the cDvbDevice
from starting Transfer Mode in order to replay DD over the DVB device.
- Added missing reset of the 'repacker' to cTS2PES::Clear() (thanks to Marco
Schlüßler for reporting this one).
|
|
- Fixed displaying the "Audio" menu with the "Green" button from the "Main" menu
in case there is only one audio track (thanks to Sascha Volkenandt for reporting
this one).
- Now setting primaryDevice = NULL before deleting the devices in cDevice::Shutdown()
to avoid problems in case other threads access it (thanks to Wolfgang Rohdewald for
pointing this out).
- Fixed a buffer overflow in case a station defines all 32 audio PIDs (thanks to
Christian Jacobsen for reporting this one).
- Fixed masking SubStreamType in cDevice::PlayPesPacket() (thanks to Werner Fink
for pointing out this one).
- The new function cPlugin::Stop() shall be used to stop any background activities
of a plugin. Previously this was done in the plugin's destructor, but it is
better to do this in a dedicated function that can be called early when shutting
down.
- Moved the call to SetAudioChannel(0) into cDevice::ClrAvailableTracks() to have it
executed also when starting a replay.
- Completed the Danish OSD texts (thanks to Mogens Elneff).
- Completed the French OSD texts (thanks to Olivier Jacques).
- The new setup option "OSD/Channel info time" can be used to define the time after
which the channel display is removed if no key has been pressed (thanks to
Olivier Jacques).
- Modified cDolbyRepacker to make sure PES packets don't exceed the requested length
(thanks to Reinhard Nissl).
- Fixed several memory leaks that were introduced through the use of cString (thanks
to Stefan Huelswitt for reporting these).
- Added CMD_SPU_CHG_COLCON to cDvbSpuDecoder::setTime() (thanks to Marco Schlüßler).
- Making sure the current audio track is actually one of the ones available in a
recording (thanks to Sascha Volkenandt for reporting a problem when starting
replay of a recording that has no Dolby Digital audio after switching to a channel
that has DD and selecting the DD audio track).
- Removed 'flags' from tTrackId (thought we would need this, but apparently we don't).
- Making sure the "Mute" and "Volume+/-" keys don't interfere with digital audio.
- Fixed the "pre 1.3.19" compatibility mode for old Dolby Digital recordings (thanks
to Werner Fink for pointing out that this can be triggered in the default branch).
- Calling pesAssembler->Reset() in cDevice::AttachPlayer() to avoid problems with
residual data in replay and Transfer Mode (thanks to Werner Fink for pointing this
out).
- Added MPEG1 replay capability to cPesAssembler (thanks to Stefan Huelswitt).
|
|
- Making sure at least the default skin is available at program start in case a
plugin needs to issue an error message (thanks to Achim Tuffentshammer for
reporting a crash in such a case). Also checking if there is a current skin
in cSkins::Message().
- Completed the Finnish OSD texts and fixed internationalization of the text
for "Setup/DVB/Audio language(s)" (thanks to Rolf Ahrenberg).
- Completed the Estonian OSD texts and switched to iso8859-13 character set
(thanks to Arthur Konovalov).
- Made cCondWait::SleepMs() sleep at least 3ms to avoid a possible busy wait.
- Fixed canceling the LIRC thread (thanks to Marco Schlüßler for pointing out
this one).
- The "Green" button in the "Main" menu is now always "Audio", since the audio
channel might be changed even if there is only one actual audio PID.
- Fixed handling the '-E' option which was broken in version 1.3.18 (thanks to
Christian Jacobsen for reporting this one).
- Added 'channels.conf.terr' entries for Mainz (thanks to Michael Heyse).
- Implemented cDolbyRepacker for better handling of Dolby Digital PES packets
(thanks to Reinhard Nissl).
- Fixed playing files with PES packets longer than 2048 byte through the full
featured DVB card (thanks to Marco Kremer for reporting this one and providing
a test sample).
- Recording and Transfer Mode now handle more than 2 audio PIDs. For this the
interfaces of the following functions have been changed:
cTransferControl::cTransferControl()
cTransfer::cTransfer()
cRecorder::cRecorder()
cReceiver::cReceiver()
cRemux::cRemux()
- Fixed a possible race condition in cDevice::Action() and cTSBuffer::Action()
(thanks to Stefan Huelswitt).
- Extended some buffer sizes to allow handling HDTV streams (thanks to Reinhard
Nissl).
- Added 'channels.conf.terr' entries for Düsseldorf and Köln (thanks to Walter Koch).
- Falling back to 'stereo' when switching channels in case the user had switched
to 'left' or 'right' (suggested by Rolf Groppe).
- Completed the Danish OSD texts (thanks to Mogens Elneff).
- Recording and Transfer Mode can now handle up to 8 Dolby Digital tracks (thanks
to Marco Schlüßler for a patch that implements substream handling into
cDevice::PlayPesPacket(), and Reinhard Nissl for adding substream handling to
cDolbyRepacker).
- Added PlayPes(NULL, 0) to cTransfer::Action() when clearing the transfer buffer
to avoid overflows (thanks to Marco Schlüßler for pointing this out).
|
|
- Removed an unused variable from cTimer::GetWDayFromMDay() (thanks to Wayne Keer
for reporting this one).
- Some more changes to the 'childTid' handling in cThread (based on suggestions by
Stefan Huelswitt).
- Fixed the spelling of 'canceling' (thanks to Wayne Keer for reporting this one).
- Re-introduced a sleep to cDvbPlayer::Action() to avoid high CPU load in still
picture mode (thanks to Reinhard Nissl for reporting this one).
- Fixed a possible race condition in generating the DVB device names (thanks to
Rainer Zocholl for reporting this one).
- Changed the way PES packets are played to allow replay of AC3 sound over the
full featured DVB cards (partially based on a patch from Werner Fink).
+ The new function cDevice::PlayPes() is now called with the complete PES data
stream and calls PlayVideo() and PlayAudio() as necessary.
+ cDevice::PlayVideo() is now only called with actual video PES packets.
+ cDevice::PlayAudio() is now called with the actual audio PES packets, which
can be either "normal" audio or AC3 data. You need at least firmware version
0x261d to replay AC3 sound over a full featured DVB card. This function now
has an 'int' return value.
+ PlayAudio() of derived cDevice classes shall no longer call the base class
function. It shall just play the given data as audio.
+ cPlayer::PlayVideo() and cPlayer::PlayAudio() are now obsolete and have been
replaced with cPlayer::PlayPes().
+ All StripAudioPackets() functions are now obsolete. The functionality has been
moved into cDevice::PlayPes(), where only the video and audio packets that are
actually required will be processed.
+ All audio track handling is now done by cDevice; cTransfer and cDvbPlayer no
longer care about audio tracks. cPlayer, however, still has the virtual hooks
for audio track handling in order to allow plugins to implement players that
have their own idea about this.
+ cChannel::[AD]pid[12]() have been replaced with cChannel::[AD]pid(int i) to
allow access to all available PIDs.
- Escaped the '-' and 'ö' characters in the man pages (thanks to Darren Salt for
pointing this out).
- Completed the Italian OSD texts (thanks to Sean Carlos).
- Fixed setting 'synced' in cRemux when recording radio channels (thanks to
Laurence Abbott).
- Removed the LOCK_THREAD from the LIRC thread (thanks to Ludwig Nussel).
- Fixed genfontfile.c (sometimes the character width was wrong, and the codes were
shifted one too far to the left).
- Fixed the character width and shifted the codes one to the right in all font
files.
- Renamed font???.c to font???-iso8859-1.c for symmetry.
- Switched the character set to iso8859-15 for English, German and Finnish (thanks
to Andreas Brugger for reporting the missing Euro sign in iso8859-1).
- Added 'channels.conf.terr' entries for Lübeck (thanks to Stefan Hußfeldt).
- Fixed a race condition in starting a thread (thanks to Reinhard Nissl for
reporting this one).
- Replaced non-threadsafe library functions with their threadsafe versions (thanks
to Rainer Zocholl for pointing this out).
- Other non-threadsafe functions have been replaced by threadsafe classes that hide
the actual buffering. In particular these are:
readdir() -> cReadDir
readline() -> cReadLine
- Several formerly non-threadsafe functions now have a return type of cString:
cChannel::ToText()
tChannelID::ToString()
cEvent::GetDateString()
cEvent::GetTimeString()
cEvent::GetEndTimeString()
cEvent::GetVpsString()
cMark::ToText()
cTimer::ToText()
cSource::ToString()
cTimer::PrintDay()
cTimer::PrintFirstDay()
PrefixVideoFileName()
IndexToHMSF()
ChannelString()
strescape()
AddDirectory()
itoa()
WeekDayName()
DayDateTime()
When using these functions in a 'const char *' context there is nothing special
to consider, except that you can no longer have a pointer to the return value,
as in
const char *date = DayDateTime();
Although this will compile without error message, the resulting 'date' will not
be valid after this line. Use this instead:
cString date = DayDateTime();
In a 'const void *' context (as in printf() etc.) the result needs to be
dereferenced with a '*', as in
printf("%s", *DayDateTime());
to make it a 'const char *'.
- Removed delay_ms(), using cCondWait::SleepMs() instead.
- Replaced time_ms() with a threadsafe and non-overflowing cTimeMs (thanks to Rainer
Zocholl for pointing out this problem).
- Added cDevice::mutexReceiver to avoid a race condition when attaching/detaching
receivers from different threads.
- The new remote control button "Audio" can be used to switch between different
audio tracks. The "Green" button in the "Main" menu has been changed from "Language"
to "Audio", since it now also controls switching between normal and Dolby Digital
audio tracks (see MANUAL for details).
- The description of the audio tracks is now taken from the "component descriptors"
that are broadcast in the EPG data. However (as no big surprise), not all channels
actually provide useful data here, so there are now some additional EPG bugfixes,
which can be activated by setting the "EPG bugfix level" to 3.
- The format of the 'epg.data' files has been extended by the new tag 'X', which
contains the stream components of an event (see man vdr(5) for details).
- The cStatus class now has the new member function SetAudioTrack(), which can be
used to get notified when the audio track has been switched, and the new member
function SetAudioChannel() which is called when the audio channel is changed.
- Skins need to implement the new cSkinDisplayTrack class to display the audio
track menu.
- The ST:TNG skin now displays the current audio track description (if any) at the
botton left side.
- The new setup option "DVB/Audio languages" can be used to control which audio
language shall be selected in case a channel broadcasts in different languages
(see MANUAL for details).
- The "Left" and "Right" keys in the "Audio" menu can be used to switch between
the left and right stereo channels in case there are different audio tracks
in these channels (see MANUAL for details).
- Fixed a possible race condition in cDevice::Action() (thanks to Mattias Grönlund).
- Fixed the default quality value when grabbing a JPEG image (thanks to Patrick
Gleichmann).
- Fixed deleting a menu item in case the next item is not selectable (thanks to
Dino Ravnic).
- Implemented displaying mandatory subtitles in the SPU decoder (thanks to Marco
Schlüßler).
- The setup option "Recording/Record Dolby Digital" has been renamed and moved to
"DVB/Use Dolby Digital". It now controls whether Dolby Digital is recorded and
whether an available DD audio track will appear in the "Audio" menu.
- Added support for circular polarization (thanks to Jonan Santiago).
- Thanks to Werner Fink, Reinhard Nissl, Sascha Volkenandt and Bjørnar Nilsen for
their support in testing and fine tuning this version.
|
|
- Fixed cRemux::ScanVideoPacket() to make sure it doesn't access memory beyond
the end of the given buffer, which has caused some unjustified "unknown
picture type errors" (thanks to Marco Schlüßler).
- Fixed a possible crash when pausing live video and the recording was unable
to start, maybe because there was no lock on the device (thanks to Andreas
Brugger for reporting this one).
- Fixed some characters in the iso8859-2 font file (thanks to Dino Ravnic).
- Fixed some errors in the Croatian language texts (thanks to Dino Ravnic).
- Fixed a possible recursion in cControl::Shutdown() (thanks to Sascha Volkenandt).
- Now setting the VPID before the APID in live mode to avoid unnecessary
overhead in the firmware (thanks to Werner Fink).
- Now checking available OSD memory at runtime (thanks to Oliver Endriss).
- Fixed some typos in the Makefile's 'font' target (thanks to Olaf Titz).
- Fixed handling childTid in cThread to avoid possible race conditions (thanks
to Stefan Huelswitt for pointing this out).
- Fixed toggling the "Day" item in the "Timers" menu, so that it selects the
right day of week for timers in the future.
- Some improvements to cPoller (thanks to Marco Schlüßler).
|
|
- Fixed cChannel::SetName() in case only the ShortName or Provider has changed
(thanks to Sascha Volkenandt for reporting this one).
- Added Danish language texts (thanks to Mogens Elneff).
- Reactivated the NPTL check at startup because there appear to be still
unsolved problems when running on NPTL systems.
- Added missing calls to cStatus::MsgOsdClear() in cSkins::Message() (thanks
to Joachim Wilke for reporting this one, and Andreas Regel for additional
input).
- Fixed the cDvbSpuDecoder (thanks to Marco Schlüßler).
- Fixed handling of pmAudioOnlyBlack (thanks to Stefan Huelswitt).
- Fixed a short glitch when starting a recording on the primary device while
in replay or transfer mode (thanks to Marco Schlüßler).
- Added missing initialization of cEvent::seen.
- Checking PID language codes for ISO 639 compliance to avoid problems with
funny characters. Invalid language codes will be stored as "???".
- The '0' key now toggles the "Day" item in the "Timers" menu between "single
shot" and "repeating". The keys '1'...'7' can be used to toggle the individual
days ('1' is Monday). Thanks to Sascha Klek for reporting a problem with the
'0' key in the "Day" item of the "Timers" menu.
|
|
- Fixed some typos in the Makefile's 'font' target (thanks to Uwe Hanke).
- Added more checks and polling when getting frontend events (based on a patch
from Werner Fink).
- No longer explicitly waiting for a tuner lock when switching channels
(apparently setting "live" PIDs before the tuner is locked doesn't hurt).
Moved the wait into cDevice::AttachReceiver() instead.
- Immediately displaying the new channel info when switching channel groups.
- Moved the main program loop variables further up to allow compilation with
older compiler versions (thanks to Marco Schlüßler for reporting this one).
- Now calling pthread_cond_broadcast() in the destructor of cCondWait and
cCondVar to make sure any sleepers will wake up (suggested by Werner Fink).
Also using pthread_cond_broadcast() instead of pthread_cond_signal() in
cCondWait, in case there is more than one sleeper.
- Making sure that timers and channels are only saved together, in a consistent
manner (thanks to Mirko Dölle for reporting a problem with inconsistent
channel and timer lists).
- Now handling the channel name, short name and provider separately. cChannel
therefore has two new functions, ShortName() and Provider(). ShortName()
can be used to display a short version of the name (in case such a version
is available). The optional boolean parameter of ShortName() can be set to
true to make it return the name, if no short name is available.
The sequence of 'name' and 'short name' in the channels.conf file has been
swapped (see man vdr(5)).
- Added the 'portal name' to cChannels (thanks to Marco Schlüßler).
- Fixed handling key codes that start with 0x1B in the KBD remote control code.
- Now using qsort() to sort cListBase lists. For this, the virtual function
cListObject::operator<() has been replaced with cListObject::Compare().
Plugins that implement derived cListObject classes may need to adjust their
code.
- The "Channels" menu can now be sorted "by number" (default), "by name" and
"by provider". While in the "Channels" menu, pressing the '0' key switches
through these modes.
- Fixed the buffer size in cRecording::SortName().
- Now displaying the name of the remote control for which the keys are being
learned inside the menu to avoid overwriting the date/time in the 'classic'
skin (thanks to Oliver Endriss for reporting this one).
|
|
- Fixed detecting transponder lock in cDvbTuner (based on a patch from Stefan
Meyknecht).
- What was previously marked with WAIT_FOR_LOCK_AFTER_TUNING is now permanently
active and uses a cCondVar to signal when a transponder is locked.
- Added some missing 'const' to cChannel.
- Added a sample setup for 'DisiCon-4 Single Cable Network' to 'diseqc.conf'
(thanks to Oliver Endriss).
- Fixed attaching a cPlayer to a cDevice, so that 'Operation not permitted'
errors don't occur any more (thanks to Marco Schlüßler).
- Fixed a case where the resultBuffer in cRemux ran full before getting a sync.
- Removed the usleep() call from cDvbPlayer::Action() to make VDR run on NPTL
systems (thanks to Alfred Zastrow). The NPTL check at startup has also been
removed.
- Taking the complete size of available data into account when deciding whether
to clear the transfer buffer to avoid overflows (thanks to Reinhard Nissl).
- Updated Romanian language texts and the iso8859-2 fonts (thanks to Lucian Muresan).
- Now actually using the iso8859-15 fonts (thanks to Lucian Muresan).
- Some minor code cleanups (thanks to Prakash K. Cheemplavam).
- Fixed missing cleanup at program exit in case there is a problem with a plugin
(thanks to Mattias Grönlund for pointing this out).
- Increased the required free buffer space in the resultBuffer of cRemux to
2 * IPACKS to avoid a buffer overflow in case a cTS2PES writes one complete
packet and then (within processing the same TS packet) wants to write another
small packet.
- Removed the signal handler and WakeUp() call from cThread (it is no longer
needed).
- Added some checks when canceling a thread and removed the usleep() in
cThread::Start() (suggested by Ludwig Nussel). Also removed 'running' from
cThread and using only childTid to indicate whether a thread is actually
running.
- Added cCondWait::Sleep() and using it to replace all usleep() calls (based
on a suggestion by Werner Fink).
- Only assigning events to timers if the related schedule has actually been
modified.
- When searching for the present event, the running status is now only taken
into account if the event has been "seen" within the past 30 seconds.
This avoids shortly seeing the wrong events in the channel display when
switching to a channel that hasn't been tuned to in a while.
|
|
- Fixed checking for the presence of NPTL (thanks to Jouni Karvo).
- Making sure section filters are only set if the device actually has a lock
(thanks to Andreas Share for pointing this out).
- Fixed a possible NULL pointer assignment in cMenuText::SetText() (thanks to
Marco Schlüssler).
- Fixed a crash in case the last line in channels.conf is a group separator and
that group is selected in the channel display (thanks to Dick Streefland).
- Added cRingBufferLinear::Read() to read directly from a file handle into the
ring buffer.
- Using timeouts in ring buffers to avoid 'usleep()'.
- Clearing the 'Transfer Mode' ring buffer after clearing the device to avoid
an "almost full" ring buffer.
- Removed locking from cRingBufferLinear for better performance under high load.
- Using a cRingBufferLinear in cRemux to avoid unnecessary copying of data.
- Using a cRingBufferLinear in cTSBuffer and filling it in a separate thread
to avoid buffer overflows. Plugins using cTSBuffer will need to remove the
call to the now obsolete Read() function (see cDvbDevice::GetTSPacket() for
the new usage of cTSBuffer).
- cRemux::Process() has been split into Put(), Get() and Del() to allow for a
better decoupling of the remuxing and disk writing process. Plugins using
cRemux will need to be modified accordingly.
- The actual disk writing in recordings is now done in a separate thread to
improve the overall throughput.
- Changed cRemux so that it returns the maximum available amount of data with
each call, not just 2048 byte.
- Added a visual display of all cRingBufferLinear buffers for debugging. To
activate it, define DEBUGRINGBUFFERS in ringbuffer.h.
- Instead of cCondVar now using the new cCondWait (which also avoids a possible
"near miss" condition; thanks to Sascha Volkenandt for pointing out this one).
cCondVar is still present for plugins that use it (and VDR itself also still
uses it in cRemote).
- The cRingBuffer now does EnableGet()/EnablePut() only if the buffer is more than
one third full or empty, respectively. This dramatically improves recording
performance and reduces system load (thanks to Marco Schlüßler for doing some
testing regarding buffer performance and giving me some hints that finally led
to finding out that this was the basic problem causing buffer overflows).
- Improved Transfer Mode (thanks to Marco Schlüßler for suggestions and testing).
- Fixed a possible crash with inconsistent SI data (thanks to Marcel Wiesweg).
- Fixed showing the replay mode if the OSD is currently in use (thanks to Kimmo
Tykkala for pointing out this problem).
- cOsdProvider::NewOsd() now always returns a valid pointer, even if the OSD is
currently in use (it will then return a dummy cOsd object and write a message to
the log file).
- Added Estonian language texts (thanks to Arthur Konovalov).
- Fixed 'newplugin' and libsi/Makefile to use the compiler defined in $(CXX) for
generating file dependencies (thanks to Andreas Brachold).
- Moved the initialization of aPid1 and aPid2 to the beginning of cDvbDevice::cDvbDevice()
to have them set in case a patch references them (thanks to Wayne Keer for pointing
this out).
- Completed the Russian OSD texts (thanks to Vyacheslav Dikonov).
- Avoiding unnecessary section filter start/stops (thanks to Marco Schlüßler).
- Made the "Channel not available!" message and mtInfo instead of mtError (suggested
by Wayne Keer).
- Made volume control more linear (thanks to Emil Naepflein and Udo Richter).
- Now skipping code table info in SI data (suggested by Milos Kapoun).
- Added missing Czech characters to fontosd-iso8859-2.c (thanks to Milos Kapoun).
- Fixed a crash in the time search mechanism (reported by Reinhard Nissl).
- If one PID can't be added, the whole cDevice::AttachReceiver() will now fail
and all PIDs added so far will be deleted (thanks to Marco Schlüßler for
pointing out this one).
- Now only saving channels.conf after a modification made by the user (avoids
lots of disk access due to automatic channel updates). Automatic channel
modifications will be saved every 10 minutes if no recording is currently
active.
- Removed the 'Log' parameter from the cChannel::Set... functions. Instead
checking if the channel has a non-zero number.
- Updated 'channels.conf.terr' for Hannover (thanks to Sven Kreiensen).
|
|
- In order to avoid problems on NPTL systems, VDR now checks for the presence
of NPTL at program start, and if it is, exits and tells the user to do
'export LD_ASSUME_KERNEL=2.4.1' before starting VDR.
- Revisited the "Fixed missing audio after replaying a DVD" change because it
introduced a sound disturbance when switching between channels on the same
transponder (thanks to Marco Schlüßler).
- In order to avoid problems on UTF-8 systems, VDR now checks for the presence
of UTF-8 at program start, and if it is, exits and tells the user to turn off
UTF-8 before starting VDR (thanks to Ludwig Nussel for pointing out a problem
with systems that are set to use UTF-8). There are also problems in case the
video partition is mounted with "iocharset=utf8" (thanks to Jörg Knitter for
reporting this one).
Please also read the "IMPORTANT NOTES" section in the INSTALL file!
- Some changes to the SPU decoder interface (thanks to Sven Goethel).
- Some improvements in cOsd creation (thanks to some suggestions by Jouni Karvo).
- Fixed calculating the OSD width and height (thanks to Olaf Henkel for reporting
a problem with long event texts in the "Classic VDR" skin).
- Fixed switching channels while an encrypted channel is being recorded, because the
channel was switched if the new channel was on the same transponder and was
a radio channel or an unencrypted channel (thanks to Martin Dauskardt for reporting
this one).
- No longer using the external 'find' command to scan the video directory for
recordings (based on a suggestion by Mirko Dölle).
- The list of recordings is now kept statically in memory to avoid long delays
when opening the "Recordings" menu. As a side effect, external modifications to
the video directory are no longer immediately reflected in the "Recordings" menu.
If a plugin manipulates the video directory in any way, it can call the function
Recordings.TriggerUpdate() to trigger an update of the list of recordings.
If some external tool manipulates the video directory, it can touch the file
'.update' in the video directory to trigger an update of the list of recordings.
- Fixed a memory leak in theme description handling (thanks to Sascha Volkenandt).
- Added cDevice::Flush() to make sure that all data in the video card's buffers
has been processed (thanks to Reinhard Nissl). Currently this is not yet actually
implemented for FF DVB cards.
- Fixed handling the color button texts in cMenuEditStrItem (thanks to Maynard
Cedric for reporting this one).
- Fixed the description of cRingBufferLinear (thanks to Ludwig Nussel for pointing
out this one).
- Fixed cRingBufferLinear::Get() in case the buffer wraps around (thanks to Ludwig
Nussel for reporting this one).
|
|
- Fixed some default parameters in 'skincurses'.
- Fixed cBitmap::DrawPixel(), which messed with other bitmaps' palettes in case
the pixel coordinates were outside this bitmap (thanks to Sascha Volkenandt for
reporting this one).
- The cBitmap::DrawText() function now doesn't set any background pixels if the
given background color is clrTransparent. This allows drawing "transparent"
texts (suggested by Sascha Volkenandt).
- The cBitmap::SetXpm() function now ignores unused "none" color entries, which
some broken graphics tools write into XPM files (suggested by Sascha Volkenandt).
- No longer setting lnb voltage if the frontend is not DVB-S (thanks to Marco
Schlüßler).
- Fixed displaying the current channel when switching via the SVDRP command CHAN
(thanks to Jürgen Schmitz for reporting this one).
- Fixed missing audio after replaying a DVD (thanks to Marco Schlüßler).
- Added a note about the default assignment of the color keys to MANUAL.
- Added a note about NPTL ("Native Posix Thread Library") to the INSTALL file
(apparently the "fix" in version 1.3.0 didn't really fix this).
- Modified 'libsi' to require callers to state the buffer sizes when getting
strings in order to avoid buffer overflows (thanks to Philip Lawatsch for
debugging a buffer overflow in eit.c).
|
|
- Fixed a crash when switching the skin and having selected a non-default theme
that is not available for the newly selected skin (thanks to Sascha Volkenandt
for reporting this one).
- Fixed some issues with gcc 3.4 (thanks to Prakash K. Cheemplavam and Marcel
Wiesweg).
- Added a hint to PLUGINS.html about how to name a plugin that implements a skin.
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Single shot timers and events now show the day of week (adopted with some changes
from the "elchi" patch, orginally introduced by Oskar Signell). Plugins that use
cEvent::GetDateString() should note that this function now returns a longer
string, including the day of week. The new function const char *WeekDayName(time_t t)
can be called with a time_t value to get the day of week for that time.
- When processing XPM data, the color name "None" is now mapped to #00000000, which
is "fully transparent" (suggested by Sascha Volkenandt).
- Fixed the OSD alignment in the SPU decoder (thanks to Miko Wohlgemuth for reporting
this one and helping to test the fix).
- Fixed freezing picture when a recording starts on a system that always uses
'Transfer Mode' (thanks to Michal Dobrzynski for reporting this one).
- Fixed a memory leak in NIT processing (thanks to Marcel Wiesweg).
- Added a few missing initializations (thanks to Marcel Wiesweg).
- Moved the declaration of cMenuText to VDR/menu.h to make it available to plugins.
It now also has a SetText() function that can be used to dynamically set the text
in an already existing cMenuText (both suggested by Stefan Huelswitt).
- Added play mode pmVideoOnly (thanks to Marcel Wiesweg).
- Added a missing cStatus::MsgOsdClear() to cDisplayChannel::~cDisplayChannel()
(thanks to Oliver Endriss).
- No longer displaying unused color buttons in the "Classic VDR" skin (thanks to
Oliver Endriss for reporting this one).
- Added some missing cStatus::MsgOsdTextItem() calls (thanks to Oliver Endriss for
reporting this one).
|
|
- Fixed a memory leak in thread handling when using NPTL (thanks to Jon Burgess).
- Fixed handling Setup.RecordDolbyDigital, which was broken since version 1.1.6.
- Fixed handling text lengths for itemized EPG texts (thanks to Marcel Wiesweg).
- Fixed the help for LSTE and LSTR (was broken in 1.3.6).
- Improved iso8859-7 fonts (thanks to Dimitrios Dimitrakos).
- Added some 3-letter language codes (thanks to Marcus Mönnig).
- Added language code handling to the subtitling descriptor in 'libsi' (thanks to
Pekka Virtanen).
- Moved several menu item classes from menu.c to menuitems.[hc] to make them
available for plugins.
- The epg2html.pl script now handles '|' in description texts.
- The new setup option "OSD/Use small font" can be used to control the use of
the small font (see MANUAL for details).
- Swapped osd.[hc] and osdbase.[hc] to have the virtual OSD base class named cOsd.
Plugins may need to adjust their #include statements.
- Colors are now given as AARRGGBB instead of AABBGGRR. The values are mapped to
the driver's (wrong) sequence in dvbosd.c (this should really be fixed in the
driver, together with the endian problem).
- The new OSD setup parameters "Left" and "Top" can be used to define the top left
corner of the OSD.
- The OSD size parameters are now in pixel (as opposed to formerly characters).
When reading a 'setup.conf' file from an older version of VDR, the OSDwidth
and OSDheight values will be converted to pixel automatically.
- The OSD is now fully device independent. See the comments in VDR/osd.h and the
description in PLUGINS.html for information on how a plugin can implement an OSD
display on arbitrary hardware.
- The OSD (actually its cBitmap class) can now handle XPM files. There are several
XPM files in the VDR/symbols directory which can be used by skins (some of these
have been taken from the "elchi" patch). See VDR/skinsttng.c for examples on how
to use these.
- Due to the changes in the OSD handling the DEBUG_OSD option for a textual OSD
has been dropped. There will be a plugin that implements a skin with this
functionality later.
- The entire OSD display can now be implemented via "skins". See VDR/skins.[hc],
VDR/skinclassic.[hc], VDR/skinsttng.[hc] and PLUGINS.html for information on how
a plugin can implement its own skin. By default VDR comes with a "Classic" skin
that implements the OSD display known from previous versions, and the new skin
named "ST:TNG Panels", which is also the default skin now. The actual skin can
be selected through "Setup/OSD/Skin".
- The colors used in a skin can now be configured using "themes". See PLUGINS.html
for information on how a skin can make use of themes, and man vdr(5) for the
structure of a theme file. The actual theme to use can be selected through
"Setup/OSD/Theme".
- Added Croatian language texts (thanks to Drazen Dupor).
NOTE: there is apparently a problem with the newly introduced iso8859-2 font,
because as soon as Setup/OSD/Language is set to Croatian (currently the last one
in the list) everything freezes and the vdr processes have to be killed with -9
and the driver needs to be reloaded. Maybe somebody else can find out what's
going wrong here...
- Added missing NULL checks when accessing sectionHandler in device.c (thanks to
Pekka Virtanen).
- Fixed setting the time from the DVB data stream (thanks to Helmut Auer for
pointing out a frequency/transponder handling mixup). This now also takes the
actual source (sat, cable etc.) into account. Please go into "Setup/EPG" and
set the "Set system time" and "Use time from transponder" parameters accordingly
(this is necessary even if you have already set them before!).
|
|
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed some descriptor handling in 'libsi' (thanks to Stéphane Esté-Gracias).
- Fixed handling the current menu item (thanks to Marc Hoppe).
- Fixed assigning events to timers (they no longer get "stuck").
- Added log entries whenever the running status of an event changes (currently
only logging the first 30 channels).
- Fixed handling timers in VPS margin if the EPG scan is turned on (the EPG scan
switched the device away from the channel, so it wouldn't see the change of
the running status).
- Fixed handling "itemized" texts in EPG data (thanks to Stéphane Esté-Gracias
for pointing out this problem, and Marcel Wiesweg for improving 'libsi').
- Fixed handling VPS times at year boundaries.
- Avoiding too many consecutive "ring buffer overflow" messages (which only
slowed down performance even more).
- Taking the Sid into account when detecting version changes in processing the
PMT (thanks to Stéphane Esté-Gracias for pointing out this problem).
- Completed the Russian OSD texts (thanks to Vyacheslav Dikonov).
- Any newline characters in the 'description' of EPG events are now preserved
to allow texts to be displayed the way the tv stations have formatted them.
This was also necessary to better display itemized texts.
- Fixed detecting the running status in case an empty EPG event is broadcast (thanks
to Michael Pennewiß for pointing this out).
- Improved performance when paging through very long menu lists.
- Removed cSchedule::GetEventNumber() and cSchedule::NumEvents(). There is now
cSchedule::Events() that returns the list of events directly.
- Avoiding occasional bad responsiveness to user interaction caused by assigning
events to timers.
- Now explicitly turning on the LNB power at startup, because newer drivers don't
do this any more (thanks to Oliver Endriss for pointing this out).
|
|
- Fixed reading the EPG preferred language parameter from 'setup.conf'.
- Fixed switching to a visible programme in case the current channel has neither
a video nor an audio PID.
- Fixed editing channels (SID now range checked) and creating new channels (NID,
TID and RID are now set to 0).
- Fixed transponder handling to make it work with satellites that provide two
transponders on the same frequency, with different polarization, like Hispasat
at S30.0W (thanks to Thomas Bergwinkl for pointing this out). See man vdr(5)
for details about the enhanced channel ID format.
- Since there appears to be no general solution for the UPT error yet, a recording
now initiates an "emergency exit" if the number of UPT errors during one
recording exceeds 10 (suggested by Gregoire Favre). Since the UPT error doesn't
happen on my system, this has not been explicitly tested.
The "preliminary fix" for the UPT error in VDR/dvbdevice.c has been disabled
by default, since it makes channel switching unpleasently slow. If you want
to have that workaround back, you can uncomment the line
//#define WAIT_FOR_LOCK_AFTER_TUNING 1
in VDR/dvbdevice.c.
- Adapted the 'sky' plugin to use the actual channel IDs, and to fetch EPG data
from www.bleb.org.
- Limited automatic retuning to devices that actually provide the transponder
(necessary for the 'sky' plugin).
- Fixed handling receivers in the 'sky' plugin, so that a recording on the same
channel won't interrupt an ongoing Transfer Mode.
- Added subtable ID and TSDT handling to 'libsi' (thanks to Marcel Wiesweg).
- Fixed some Russian OSD texts (thanks to Vyacheslav Dikonov).
- Added the 'running status' to the EPG events. This is necessary for implementing
the VPS function for recording.
- Removed the obsolete 'present' and 'following' handling from the EPG data.
- The EPG data is now always kept sorted chronologically in the internal data
structures. This also means that any EPG data retrieved through the SVRDP
command LSTE is guaranteed to be sorted by start time.
- Now using the 'running status' in the channel display, so that a programme
that has an end time that is before the current time, but is still running,
will still be shown in the display (provided the broadcasters handle the
'running status' flag correctly). This also applies to programmes that have
a start time that is in the future, but are already running.
- Implemented an "EPG linger time", which can be set to have older EPG information
still displayed in the "Schedule" menu (thanks to Jaakko Hyvätti).
- Added PDCDescriptor handling to 'libsi'.
- Implemented handling the VPS timestamps (aka "Programme Identification Label")
for full VPS support for timers (provided the tv stations actually broadcast
this information). The VPS time is displayed in the event info page if it exists
and is different than the event's start time.
- Extended the SVDRP command LSTE to allow limiting the listed data to a given
channel, the present or following events, or events at a given time (thanks to
Thomas Heiligenmann).
- Fixed a typo in libsi/si.h (thanks to Stéphane Esté-Gracias).
- Timers can now be set to use the VPS information to control recording a programme.
The new setup options "Recording/Use VPS" and "Recording/VPS margin", as well as
the "VPS" option in the individual timers, can be used to control this feature
(see MANUAL for details).
Note that this feature will certainly need a lot of testing before it can be
called "safe"!
- The "Schedule" and "What's on now/next?" menus now have an additional column
which displays information on whether there is a timer defined for an event,
whether an event has a VPS time that's different than its start time, and
whether an event is currently running (see MANUAL under "The "Schedule" Menu"
for details).
|
|
- Fixed handling language codes in case there is no audio or Dolby PID.
- Fixed handling CA ids (was broken in 1.3.3).
- Fixed the SVDRP command 'STAT DISK' to avoid a 'division by 0' in case the
disk is full (thanks to Jens Rosenboom).
- Fixed handling bitmap indexes for 256 color mode (thanks to Andreas Regel).
- Now handling "linked services" (based on the 'autopid' patch from Andreas
Schultz). Linked channels are detected and added to 'channels.conf', but
currently they are not yet presented to the user other than being in the
normal channel list (this will come later).
- Preliminary fix for the "Unknown picture type error" (thanks to Sascha
Volkenandt for his support in debugging this one). This may slow down switching
between channels on different transponders for now, but a better solution will
come later.
- Fixed the validity check for channel IDs, because some providers use TIDs with
value 0 (thanks to Thomas Bergwinkl).
- Enabled switching to a channel even if it has no Vpid or Apid set, because these
might be automatically set when tuned to that transponder.
- No longer closing the Channels menu after trying to switch to a channel that
is currently not available.
- Removed the now obsolete CaCaps stuff. The Setup/CICAM menu now displays the
actual CAM type as reported by the CAM. The 'ca.conf' file has been stripped
down to the values 0..4.
|
|
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added ISO639LanguageDescriptor to 'libsi'.
- Changed the 'languageCode' members in the descriptor classes of 'libsi' to
'char[4]' and setting the 4th byte to 0 for easier handling.
- Fixed frequency handling when setting the CA descriptors in cDvbTuner::Action()
(thanks to Jan Ekholm for reporting and helping to debug this one).
- Now setting CA descriptors even if "Setup/DVB/Update channels" is less than 2.
- There can now be up to 32 audio and Dolby PIDs (however, currently still only
the first two are used throughout the rest of the program).
- The audio and Dolby PIDs in 'channels.conf' now can have an optional language
code (see man vdr(5)). Currently this is only stored and not yet used otherwise.
- Added a call to cStatus::MsgOsdCurrentItem() to cMenuEditItem::SetValue()
(thanks to Martin Hammerschmid).
|
|
- Fixed a lockup in the EPG scanner when no non-primary device was available
(thanks to Martin Holst for reporting this one).
- Fixed a compiler warning about virtual cConfig::Load() functions (thanks to
Lauri Tischler for reporting this one).
- Fixed a warning about character comparison in libsi/si.c (thanks to Lauri
Tischler for reporting this one).
- The new parameter "Update channels" in the "Setup/DVB" menu can be used to
control if and how channels will be automatically updated (see MANUAL).
This has already been part of the 'autopid' patch by Andreas Schultz and has
now been adopted.
- Fixed a crash in case there is no DVB hardware present (thanks to Sascha
Volkenandt for reporting this one).
- Changed calculation of channel ids to make it work for tv stations that use
the undefined NID value 0 (thanks to Teemu Rantanen for reporting this one).
- Enhanced the SDT filter to handle multi part sections.
- Added support for selecting preferred EPG languages (based upon a patch by
Teemu Rantanen).
- Fixed a 'const' in libsi/si.h (thanks to Marcel Wiesweg).
- Fixed the 'su' call in 'runvdr' to make it work on systems that require the
user name to appear before the command option (thanks to Robert Huitl).
- Fixed testing for matching section filters in case they are turned off (thanks
to Marcel Wiesweg).
- In case of incomplete sections an error message is now logged only every 10
seconds.
- Fixed a possible NULL pointer access in cEITScanner::Process() (thanks to
Andreas Kool).
- The actual transponder data is now taken from the NIT and existing channels
are adjusted if necessary. If the NIT contains new transponders, they are
scanned for channels during the next EPG scan. Note that only the satellite
branches are tested, cable and terrestrial need to be tested by somebody who
actually has such equipment.
|
|
- Changed thread handling to make it work with NPTL ("Native Posix Thread Library").
Thanks to Jon Burgess, Andreas Schultz, Werner Fink and Stefan Huelswitt.
- The cThread class now accepts a 'Description' parameter, which is used to log
the beginning and end of the thread, together with its process and thread id.
For descriptions that need additional parameters you can use the function
cThread::SetDescription(), which accepts 'printf()' like arguments.
Existing plugins that use threads should be changed to use this functionality
instead of explicit 'dsyslog()' calls inside their Action() function in order
to support logging the thread ids.
- Added "Slovak Link" and "Czech Link" to 'ca.conf' (thanks to Emil Petersky).
However, 'ca.conf' is now pretty much obsolete due to the automatic CA handling.
- Mutexes are now created with PTHREAD_MUTEX_ERRORCHECK_NP, which makes the
'lockingTid' stuff obsolete (thanks to Stefan Huelswitt).
- Changed font handling to allow language specific character sets.
- Adopted the small font character set from the "Elchi" patch (originally
provided by Alessio Sangalli).
- Greek language texts now use iso8859-7 character set (thanks to Dimitrios
Dimitrakos).
- Rearranged section data handling, so that the actual data handling can be done
separately, even from within plugins.
- The EPG data structures have been moved from eit.[hc] to epg.[hc] and have been
adapted to the general VDR coding style. Plugins that use these data structures
may need to change some function names (which should be obvious).
The name 'subtitle' has been changed to 'shortText' to avoid clashes with actual
subtitles that are part of a movie. The name 'extendedDescription' has been
shortened to 'description'.
- Replaced 'libdtv' with 'libsi' (thanks to Marcel Wiesweg), which is thread
safe and can be used by multiple section filters simultaneously.
- Added 'cRwLock' to 'thread.[hc]'. Note that all plugin Makefiles need to
define _GNU_SOURCE for this to work (see the example plugin Makefiles and
'newplugin').
- Fixed a problem with crc32 in SI handling on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Fixed an alignment problem in CAM access on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Added 'StreamType' setting to CAM communication, which is important for
Aston/SECA CAMs (thanks to Antonino Sergi).
- Now the CA descriptors are sent to the CAM in the 'program' or 'ES level'
sections, depending on where they are found in the PMT (thanks to Hans-Peter
Raschke for reporting this one). This should make SkyCrypt CAMs work.
- Now using the 'version number' of EPG events to avoid unnecessary work.
- Channel data is now automatically derived from the DVB data stream (inspired
by the 'autopid' patch from Andreas Schultz).
- The current channel is now automatically re-tuned if the PIDs or other settings
change. If a recording is going on on a channel that has a change in its
settings, the recording will be stopped and immediately restarted to use the
new channel settings.
- EPG events now use the complete channel ID with NID, TID and SID.
- Channel names in 'channels.conf' can now have a short form, as provided
by some tv stations (see man vdr(5)). Currently channels that provide short
names in addition to long ones are listed in the OSD as "short,long name",
as in "RTL,RTL Television". The short names will be used explicitly later.
- The Ca parameter in 'channels.conf' has been extended and now contains all the
CA system ids for the given channel. When switching to a channel VDR now tests
for a device that provides one of these CA system ids. The devices automatically
get their supported ids from the CI handler.
- The values in 'ca.conf' are currently without any real meaning. Whether or not
a channel with conditional access can be received is now determined automatically
by evaluating its CA descriptors and comparing them to the CA system ids
provided by the installed CAM. Only the special values 1-16 are used to assign
a channel to a particular device.
- Increased the maximum number of possible OSD colors to 256.
- Limited the line length in the EPG bugfix report, which appears to fix a buffer
overflow that caused a crash when cleaning up the EPG data (at 05:00 in the
morning).
|
|
- Fixed handling Priority -1 in cDvbDevice::ProvidesChannel() (thanks to
Torsten Herz).
- Fixed processing EPG data in case there is no title (thanks to Torsten Herz).
|
|
- Added cDevice::GetSTC() (suggested by Sven Goethel).
- Added Asia-Pacific satellites to 'sources.conf' (thanks to Richard Scobie).
- Added North American satellites to 'sources.conf' (thanks to Luke Jenkins).
- Fixed getting the list of recordings in case VDR is started from a directory
where it doesn't have access to (thanks to Dirk Mueller).
|
|
- Improved cDvbDevice::StillPicture() (thanks to Oliver Endriss).
- Continuing learning remote control keys in case one rc fails (thanks to
Oliver Endriss).
- Fixed handling comments in editing marks.
|
|
- Improved cDvbDevice::StillPicture() (thanks to Thomas Heiligenmann).
|
|
- Updated the required driver version in INSTALL (thanks to Jens Groth for
reporting this one).
- Fixed missing channel info after an incomplete channel group switch (thanks
to Andreas Trauer).
- Fixed handling a channels.conf that contains a ":@nnn" line as its last entry
(thanks to Ralf Klueber).
- Fixed detecting the /dev/videoN devices for GRAB in case there are others
before the DVB devices (thanks to Andreas Kool).
- Updated 'channels.conf.terr' for Berlin (thanks to Markus Hardt).
- Fixed handling rc key learning in case cRemote::Initialize() returns 'false'
(thanks to Oliver Endriss).
- Fixed initializing the highlight area in cDvbSpuDecoder (thanks to Sven Goethel).
- Now trying to get a timer's channel without RID when loading 'timers.conf'
(thanks to Thomas Rausch).
- Removed the unused 0x73 (TOT) filter in eit.c (thanks to Andreas Trauer).
- Fixed extracting the ES data in cDvbDevice::StillPicture() (thanks to Stefan
Huelswitt).
- Added MPEG1 handling to cDvbDevice::StillPicture() (thanks to Thomas
Heiligenmann).
- Changed the default "Lifetime" to 99, which means that recordings will
never be deleted automatically in case the disk runs full (suggested by
Oliver Endriss). Note that in an existing VDR installation the current
value as set in 'setup.conf' will still be used - this change only affects
new VDR installations.
- Edited recordings will now never be deleted automatically if the disk runs
full (suggested by Emil Naepflein).
- Channel IDs are now checked when reading 'channels.conf' to avoid later
problems with timers.
|
|
- Updated VIVA, VIVA Plus, MTV Central and MTV 2 in channels.conf (thanks to
Sebastian Frei).
- Changed "Studio Universal" to "Sci-Fi" in channels.conf.
- Fixed a crash when using the --terminal option without having access to the
given terminal (thanks to Steffen Barszus for helping to debug this one).
- Added a note about the driver version needed for the still picture fix from
version 1.2.5pre1 to work properly (thanks to Oliver Endriss for pointing
this out).
- Fixed setting the primary device in case none of the devices provides an MPEG
decoder (thanks to Rene Bartsch for reporting this one).
- Fixed handling the "Red" button in the "Schedules" menu in case there are no
events listed for a particular channel (thanks to Christoph Hermanns for
reporting this one).
- When setting an editing mark while in "Pause" mode, replay now immediately
jumps to the marked frame (thanks to Oskar Signell for pointing out this
problem).
- The DVB devices no longer send CA descriptors to the CAM while the EPG scanner
is active (sometimes the CAMs got irritated when the device tuned to channels
they couldn't handle).
|
|
- Now explicitly handling exit value 0 and 2 in 'runvdr'.
- Added a missing 'w' to the allowed characters for Finnish and Swedish (thanks
to Lauri Tischler and Ragnar Sundblad).
- Added channels for DVB-T Hannover (Germany) to channels.cont.terr (thanks to
Peter Waechtler).
- Fixed a hangup in SVDRP when the client disappears without sending QUIT (thanks
to Robert Bartl for reporting this one). The problem was introduced in version
1.2.2 through the fix for an occasional "Broken pipe" error in SVDRP connections.
- Updated 'channels.conf.terr' for Berlin.
- Fixed displaying still pictures, now using the driver's VIDEO_STILLPICTURE call
directly (thanks to Oliver Endriss). This also improves navigating through DVD
menus with the DVD plugin. If this causes problems with your particular system
(maybe because you are using the 'analogtv' plugin) you can reactivate the
previous behaviour by commenting out the line
#define VIDEO_STILLPICTURE_WORKS_WITH_VDR_FRAMES
in VDR/dvbdevice.c.
Note that you need driver version 2003-08-23 or later for this to work!
- Fixed handling extra blanks in plugin command lines.
- Actually implemented the SVDRP command DELC.
- Now clearing the player device if there are too many poll timeouts in 'Transfer
Mode', which avoids buffer overflows and black screens in such cases.
|
|
- Fixed 'runvdr' to stay in the loop only if VDR returns an exit status of '1'.
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Empty values in setup.conf are no longer treated as an error (thanks to Andreas
Kool for reporting this one).
- Added a note about the config files of plugins to INSTALL (thanks to Thomas
Keil).
- VDR now continues to start up, even if there is an error in setup.conf.
- Fixed a bug in resetting OSD color palettes (thanks to Torsten Herz).
- Fixed starting a recording on the primary device if there is a replay session
active (thanks to Javier Marcet for reporting this one).
- Avoiding an unnecessary stop of an ongoing Transfer Mode when starting a
recording on the primary device.
|
|
- Fixed the TS to PES repacker so that it works with MPEG1 streams (thanks to
Andreas Kool).
- Fixed keeping track of the current channel number when moving channels in
the "Channels" menu (thanks to Mirko Günther for reporting this one).
- Made the plugin library directory configurable via Make.config (thanks to
Ludwig Nussel).
- Fixed scaling SPU bitmaps in Letterbox mode when playing NTSC material.
In order to do this, the cDevice was given a new member function GetVideoSystem().
- Fixed two warnings when compiling with gcc 3.3.1 (thanks to Alfred Zastrow for
reporting this).
- Made crc32() a static function in libdtv/libsi/si_parser.c to avoid a name clash
when using other libraries that also implement a function by that name (thanks
to Reinhard Nissl for reporting this one).
- Fixed staying off the end of an ongoing recording while replaying in time shift
mode (thanks to Rainer Zocholl for reporting this one).
- VDR now stops with exit status 2 if one of the configuration files can't be
read correctly at program startup (suggested by Rainer Zocholl).
- Fixed a crash when starting "Pause live video" twice within the same minute on
the same channel.
- Fixed freezing replay if a timer starts while in Transfer Mode from the device
used by the timer, and the timer needs a different transponder (thanks to
Richard Robson for reporting this one).
- Fixed toggling channels with the '0' key (thanks to Mirko Günther for reporting
this one).
- Made the "Zap timeout" (the time until a channel counts as "previous" for
switching with '0') a setup variable, available in "Setup/Miscellaneous"
(suggested by Helmut Auer).
- Removing deleted recordings faster than normal when cutting, to avoid running
out of disk space (thanks to Manfred Schmidt-Voigt for reporting this one).
|
|
- Modified handling of audio packets in cDvbPlayer for better sync with external
AC3 replay (thanks to Werner Fink).
- Fixed a memory leak in cNonBlockingFileReader (thanks to Stefan Huelswitt).
- Completed the French OSD texts (thanks to Gregoire Favre).
- Completed the Finnish OSD texts (thanks to Niko Tarnanen and Rolf Ahrenberg).
- Fixed I/O handling in case an explicit controlling terminal is given (thanks
to Oliver Endriss).
- Fixed resume file handling in case the resume.vdr file can't be written
(thanks to Gerhard Steiner).
- Fixed cutting a recording if there is only a single editing mark (thanks to
Ralf Klueber for reporting this one).
- Fixed volume display in case a plugin has its own OSD open (thanks to Marcel
Wiesweg).
- Fixed channel switching in the EPG scanner on single device systems.
- Completed the Swedish OSD texts (thanks to Tomas Prybil).
- Now switching to the channel used by the most recently started timer in case
the original current channel becomes unavailable due to a recording on a
different transponder. If this fails, a channel up/down switch is attempted as
a fallback solution (thanks to Lauri Tischler for reporting this one, and to
Hermann Gausterer for suggesting to switch to the recording channel).
- Fixed cReplayControl::Show() to avoid a compiler warning in g++ 3.2.3 (thanks
to Jan Ekholm for reporting this one).
- Completed the Slovenian OSD texts (thanks to Matjaz Thaler).
- Changed the DEFAULTPRIORITY in device.c to -1, so that the primary device
will be used for FTA recordings in case the CAM is connected to a non-primary
device (thanks to Reinhard Walter Buchner for reporting this one).
- The cCiHandler now closes its file handle when it gets destroyed.
- Checking for duplicate recordings with the same file name and disabling the
second timer (thanks to Peter Bieringer for reporting this one).
- Fixed handling newly created timers in case they are not confirmed with "Ok"
(thanks to Gerhard Steiner for reporting this one).
- It is now possible to directly delete a timer that is currently recording
(thanks to Alexander Damhuis for reporting this one).
|
|
- Fixed minimum lifespan of deleted recordings (thanks to Jaakko Hyvätti).
- Updated French OSD texts (thanks to Olivier Jacques).
- Fixed paging through lists with repeated Left/Right keys.
- Fixed setting the PCR-PID in case it is equal to one of the other PIDs (thanks
to Oliver Endriss for reporting this one).
- Fixed double call to MainMenuAction() of a plugin if invoked via a hotkey (thanks
to Kai Moeller for reporting this one).
- Fixed handling dedicated keys.
- Now turning off live PIDs when replaying. This avoids short spikes from other
channels when switching between Transfer Mode channels, and also lets an ongoing
replay continue even if a recording is started on the primary device.
- The RCU channel display no longer changes when a recording on a different
channel starts on the primary device.
- Restoring the current channel in case a recording has switched the transponder.
If all devices are busy and none of them can provide the current channel, the
message "Channel not available!" will be displayed.
- Removed the (no longer necessary) 'panic' stuff from cThread.
- Added cStatus::OsdItem() to provide the entire list of menu items to a plugin
(thanks to Carsten Siebholz).
- The red ("Record") and yellow ("Pause") button in the "Main" menu are no longer
available when replaying.
|
