summaryrefslogtreecommitdiff
path: root/dvbosd.h
AgeCommit message (Collapse)Author
2002-01-27Version 0.99pre2vdr-0.99pre2Klaus Schmidinger
- Fixed setting the OSD size in the 'Confirm' interface call (thanks to Deti Fliegl). - Removed the 'read incomplete section...' error message in the EIT processor. - Fixed channel data for "DW TV" (thanks to Axel Gruber). - Added DPID to "PREMIERE MOVIE 1" in channels.conf.cable (thanks to Stephan Schreiber). - Prepared the OSD functions for multiple overlapping windows. - Removed the check to see whether the system time is running linearly. - Improved performance of SVDRP command entry. - Removed EPGBugfixLevel '3' - after more than a year Pro-7 finally managed to broadcast the correct timestamps for EPG events between 0:00 and 6:00! - Fixed failing watchdog timer if program hangs in OSD activities (thanks to Carsten Koch). - No longer requiring 'libncurses' if compiling without DEBUG_OSD=1 and REMOTE=KBD (thanks to Lauri Pesonen). - The "Recordings" menu now displays a hierarchical structure if there are subdirectories for the recordings. This can be controlled through the "RecordingDirs" parameter in the "Setup" menu. See "MANUAL/Replaying a Recording" for details. - Improved speed of setting the Help button texts. - Fixed handling file names that contain single quotes (') or dollar signs ($) in the call to the shutdown command (option '-s') and the recording command (option '-r'). - Improved error handling in the editing process; the resulting file will be deleted if an error occured. - A message is now prompted at the end of the editing process, indicating whether the process succeeded or failed. - Fixed setting the LastActivity timestamp after a shutdown prompt (thanks to Sergei Haller). - A message is now prompted if free disk space becomes low during recording. - The editing process now calls AssertFreeDiskSpace() to remove deleted recordings if the disk becomes full. - The "Main" menu now displays in its title the used disk space (in percent) and the estimated free disk space (in hh:mm), assuming a data rate of 30 MB per minute. - Activating the "Recordings" menu now displays "scanning recordings..." to give the user some feedback in case this takes longer. - Status messages are now displayed centered. - Removed the 'Tools' subdirectory from the VDR archive. All contributed tools can now be found at ftp://ftp.cadsoft.de/pub/people/kls/vdr/Tools.
2001-07-29Version 0.85vdr-0.85Klaus Schmidinger
- Added Norwegian language texts (thanks to Jørgen Tvedt). - Increased the usleep value in cDvbOsd::Cmd() to 5000 in order to work on systems with the KURT/utime-patch (thanks to Guido Fiala). - Changed the check whether the driver is loaded in runvdr to check for the 'dvb' module (the last one loaded). - Fixed repeat function with LIRC (thanks to Stefan Huelswitt). - Increased the upper limit for the symbol rate to 30000 (thanks to Ulrich Röder). - Made the position of the channel display configurable (thanks to Stefan Huelswitt). - Made the width and height of the OSD configurable (thanks to Stefan Huelswitt). - DiSEqC support can now be generally enabled/disabled in the Setup menu. This may be necessary if your multiswitch gets irritated by the default DiSEqC codes '0' (thanks to Markus Lang). - Fixed replaying in case there is no index file. - Fixed jumping to an editing mark when replay has been paused. - Avoiding unnecessary code execution in the replay progress display (thanks to Guido Fiala). - When entering time values the digits that still have to be entered are now shown as '-' (as in "1-:--"). - When setting an editing mark while the progress display is not active, the display will now be turned on for a short while to indicate the successful setting of the mark. - Updated 'channels.conf' for Premiere World (thanks to Helmut Schächner). Check your timers if you use this channels.conf file, since the sequence of several PW channels has been changed. - Changed the color of "Info" messages to "black on green" and that of the confirmation messages (like "Delete...") to "black on yellow". - Fixed display with DEBUG_OSD (it still crashes sometimes, esp. when replaying, but I can't seem to find what causes this... any ideas anybody?). - Avoiding audio/video distortions in 'Transfer Mode' by no longer actually tuning the primary interface (which can't receive this channel, anyway). Apparently the driver gets irritated when the channel is switched and a replay session is started immediately after that. - Increased timeout until reporting "video data stream broken" when recording. - Explicitly switching back to the previously active channel after ending a replay session (to have it shown correctly in case it was in 'Transfer Mode').
2001-01-18Version 0.70vdr-0.70Klaus Schmidinger
- VDR now requires driver version 0.8.1 or higher. - Recordings are now saved in PES mode. Note that you now need to install the driver *WITHOUT* 'outstream=0'! This is the default when you 'make insmod' in the DVB/driver directory. Old recordings (in AV_PES mode) can still be replayed (as long as the driver still supports replaying AV_PES files). The only limitation with this is that in fast forward/back mode the picture may be slightly distorted and there may be sound fragments. - The EPG data is now dumped into the file /video/epg.data every ten minutes. Use the Perl script 'epg2html.pl' to convert the raw EPG data into a simple HTML programme listing. - Fixed handling of channel switching with the "Blue" button in the "What's on now/next?" menus. - Fixed saving the MarginStop setup parameter. - Fixed missing initialization in cConfig. - Implemented "On Disk Editing". - There is no more default 'timers.conf' file. - Added Italian language texts (thanks to Alberto Carraro). - Fixed starting a replay session when the program is currently in "transfer mode". - Fixed setting/modifying timers via SVDRP with empty summary fields. - Fixed a problem with recordings that have a single quote character in their name (this is now mapped to 0x01). - Changed the value for Diseqc to '0' in the default 'channels.conf'. - Fixed displaying channels and recording status in the RCU's LED display when a recording is interrupted due to higher priority. - Implemented safe writing of config files (first writes into a temporary file and then renames it). - In case the video data stream is broken the log message will come only every 5 seconds. - The current channel is now saved in the 'setup.conf' file when VDR is cancelled, and will be restored next time it is started (thanks to Deti Fliegl). - The EIT scanning thread is now locked when switching channels to avoid problems. - Encrypted channels can now be selected even without knowing the PNR (however, it is still necessary for the EPG info).
2000-11-19Version 0.68vdr-0.68Klaus Schmidinger
- Date and time in the title of an event info page are now always right adjusted. - The 'current channel' is now handled device specific (in case there is more than one DVB card). - The 'SetSystemTime' option in the "Setup" menu is now shown as "yes/no". - Implemented "internationalization" (see 'i18n.c' for information on how to add new languages). Thanks to Miha Setina for translating the OSD texts to the Slovenian language. - Fixed learning keys on the PC keyboard (display oscillated). - Fixed a timing problem with OSD refresh and SVDRP. - Avoiding multiple definitions of the same timer in the "Schedule" menu (this could happen when pressing the "Red" button while editing the timer). - There can now be a configuration file named 'commands.conf' that defines commands that can be executed through the "Main" menu's "Commands" option (see FORMATS for details on how to define these commands). - Added a 'fixed' font for use with the output of system commands. - The 'Priority' parameter of the timers is now also used to interrupt a low priority timer recording if a higher priority timer wants to record. - A timer recording on a DVB card with a CAM module will now be interrupted by a timer that needs to use this specific DVB card to record an encrypted channel, if the timer currently occupying this DVB card doesn't need the CAM module (and thus can continue recording on a different DVB card). - The "Yellow" button in the "What's on now/next?" menus now displays the schedule of the current channel from that menu. - All DVB cards in a multi-card system now write their EIT information into the same data structure. - If there is more than one DVB card in the system, the non-primary cards are now used to periodically scan through the channels in order to keep the EPG info up-to-date. Scanning kicks in after 60 seconds of user inactivity (timeout in order to keep user interactions instantaneously) and each channel that has the 'pnr' parameter defined in 'channels.conf' is switched to for 20 seconds. If there is only one DVB card in the system, that card will start scanning after 5 hours (configurable through the "Setup" menu) of user inactivity and will switch back to the channel it originally displayed at the first sign of user activity. Any scanning will only occur if that particular card is not currently recording or replaying. - Now shifting the 'Subtitle' info into the 'ExtendedDescription' on stations that don't send the EIT information correctly (like, e.g., 'VOX'). - Implemented a 10 seconds latency when removing files. - Fixed unwanted reaction on the "Green" and "Yellow" button in the "Event" display. - Implemented 'Transfer Mode' to display video data from the DVB card that actually can receive a certain channel on the primary interface. This is currently in an early state and may still cause some problems, but it appears to work nice already.
2000-11-01Version 0.67vdr-0.67Klaus Schmidinger
- The EIT information is now gathered in a separate thread. - The sytem time can now be synchronized to the time broadcast in the DVB data stream. This can be enabled in the "Setup" menu by setting "SetSystemTime" to 1. Note that this works only if VDR is running under a user id that has permisson to set the system time. - The new item "Schedule" in the "Main" menu opens VDR's EPG (thanks to Robert Schneider). See the MANUAL file for a detailed description. - The new setup parameters MarginStart and MarginStop define how long (in minutes) before the official start time of a broadcast VDR shall begin recording, and how long after the official end time it shall stop recording. These are used when a recording is programmed from the "Schedules" menu. - The delay value in the dvb.c.071.diff patch to the driver has been increased to '3', because on some systems the OSD was not displayed correctly. If you are running an already patched version 0.71 driver and encounter problems with the OSD, please make sure the parameter in the ddelay call is '3', not '2'. - Fixed initializing the RCU remote control code (didn't work after switching on the system). - Problematic characters in recording names (which can come from timers that are programmed via the "Schedules" menu) are now replaced by suitable substitutes.
2000-10-03Version 0.65vdr-0.65Klaus Schmidinger
- Modified LIRC interface to better handle repeat function. - Faster OSD by first writing into a bitmap and then sending the entire bitmap to the DVB driver at once (requires the patch 'dvb.c.071.diff' to be applied against the version 0.71 DVB driver file 'dvb.c'). - When switching channels the channel is now immediately displayed, and the current/next information is shown as soon as it becomes available. - No longer displaying the year in the 'Recordings' menu to saves space for the title. - The 'Recordings' menu now displays a '*' to indicate new recordings. - Added the description of the timers.conf file to the FORMATS file (thanks to Bastian Guse). - Displaying as much as possible of the current/next info (dropping characters that would display only partially). - In normal viewing mode the '0' key now toggles between the current and the previous channel.