| Age | Commit message (Collapse) | Author |
|---|
|
- Fixed detecting broken connection to the LIRC daemon (thanks to Ludwig Nussel).
- Now sending CA descriptors to the CAM in the same sequence as they were originally
received (thanks to Stefan Huelswitt).
- The PCR PID can now be set separately from the video PID. The syntax in the
'channels.conf' file is, for example, ...:164+17:..., where 164 is the video PID
and 17 is the PCR PID. The separator is a '+' sign, not a comma or semicolon as
with the audio PIDs, because this is not an alternate PID, but rather an
additional, necessary PID. In order to use this feature you need a driver version
dated 2003-04-27 or higher (setting the PCR PID didn't work in earlier versions).
- Fixed deleting the last recording in the "Recordings" menu, which started pausing
live video (thanks to Christoph Friederich for reporting this one).
- Now setting the "broken link" flag for GOPs at the beginning of a new video
sequence, which avoids artefacts when cutting (thanks to Stefan Huelswitt).
- Removed the Mute() call from cDvbDevice::StillPicture() (suggested by Andreas
Schultz).
- Updated 'channels.conf.terr' for Berlin (thanks to Andreas Brachold).
- Extended logging info when starting/stopping timers to show the channel number,
start/stop time and the file name (suggested by Manuel Hartl).
- Added a note regarding non-VDR files in the /videoX directories to INSTALL
(suggested by Benjamin Harling).
- Skipping keys that come in too fast from LIRC (thanks to Christian Jacobsen).
- Avoiding short display of the main menu if a plugin displays its own OSD and
is started through a user defined key macro (thanks to Andreas Mair for reporting
this one).
- Reduced the time to wait for EPG data when starting a recording to 3 seconds.
- The new SVDRP command STAT can be used to request information about the disk
usage (thanks to Thomas Koch).
- Fixed faulty calculation of section length in eit.c (thanks to Teemu Rantanen).
|
|
- Using masks in EIT filtering to reduce the number of filters (thanks to Andreas
Schultz).
- Fixed handling Ca descriptors (thanks to Stefan Huelswitt).
- Now only those Ca descriptors are sent to a CAM that are actually understood
by that CAM.
- Re-enabled CAM communication during replay and on non-Ca channels. This requires
a DVB driver with firmware version 2613 or later.
- It is now possible to do simultaneous recording and replay with a single DVB
card, even with encrypted channels. This requires the use of the Link Layer
firmware, version 2613 or higher; the -icam firmware is still limited to live
encrypted channels only. Finally we have time shift for encrypted channels on
single card systems!
- Enhanced detection of pending user I/O from CAMs to avoid sluggish reaction
to remote control keypresses.
- Implemented "pause live video". You can now press "Menu/Yellow" or "Pause" on
your remote control while watching live video to start an instant recording
of the current programme and immediately start replaying that recording.
|
|
- The CAM is now accessed only if the current channel actually has a non-zero Ca
value, and CAM access is completely suppressed during replay, which avoids
problems in case the CAM is attached to the primary DVB device.
- The "Left" and "Right" buttons now set the cursor to the first or last list item
even if the list consist only of a single page, like, for instance, the Main menu
(thanks to Oliver Endriss).
- Made the log message "OSD window width must be a multiple of 4..." a debug message
instead of an error message, so it can be avoided by using a log level less than 3.
- Updated Greek language texts (thanks to Dimitrios Dimitrakos).
- Fixed faulty behaviour of the "Mute" key in case the channel display is visible
(thanks to Florian Bartels for reporting this one and Sascha Volkenandt for
helping to fix it).
- Modified LOF handling to allow for C-band reception (thanks to Malcolm Caldwell).
- Added some missing cAudio handling calls (thanks to Werner Fink).
- Replaced the 'for' loops in StripAudioPackets() with memset() calls (thanks to
Werner Fink).
- Further increased the timeout until an index file is considerd no longer to be
written.
- Fixed a crash in case the index file can't be accessed any more during replay
(thanks to Stefan Huelswitt for reporting this one).
- Fixed displaying messages in the status line in case they exceed the OSD width
(thanks to Gerhard Steiner for reporting this one).
- Avoiding high CPU load in case the connection to LIRC gets lost (thanks to
Ludwig Nussel).
- Fixed handling repeat function with LIRC (thanks to Ludwig Nussel).
- Fixed handling min/max borders when entering integer values (thanks to Andy
Grobb for reporting this one).
- Implemented a "resume ID" which allows several users to each have their own
resume.vdr files (thanks to Martin Hammerschmid). This parameter can be set in
the "Setup/Replay" menu (see MANUAL for details).
- Now using 'libdtv' version 0.0.5 (thanks to Rolf Hakenes for the new version
and Stefan Huelswitt for adapting VDR to it).
- If no device with an MPEG decoder can be found at startup, the first device
is now used as primary device (just to have some device).
- Adjusted some Premiere channels in 'channels.conf' (thanks to Thomas Koch).
- Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt).
- The 'epg.data' file is now read after all plugins have been started (thanks
to Sascha Volkenandt).
- The LIRC remote control no longer tries to learn keys if it can't connect to
the LIRC daemon (thanks to Ludwig Nussel for reporting this one). The same
applies to the RCU remote control in case of errors during startup.
- Fixed handling of Ca parameters with values <= MAXDEVICES, which don't indicate
an actual encrypted channel (thanks to Stefan Huelswitt for reporting this one).
|
|
- Removed signal handling and usleep(5000) from cDvbOsd::Cmd() (apparently this
is no longer necessary with DVB driver 1.0.0pre2 or later).
- If the primary device (as defined in setup.conf) doesn't have an MPEG decoder
(and thus can't be used as a primary device) VDR now scans all devices at
startup and uses the first one (if any) that actually has an MPEG decoder.
That way this will also work automatically if the primary device is implemented
by a plugin.
- Fixed a possible deadlock when using the "Blue" button in the "Schedules" menu
to switch to an other channel (thanks to Torsten Herz).
- Fixed the EPG bugfix code number for the MAX_USEFUL_SUBTITLE_LENGTH fix (thanks to
Torsten Herz for reporting this one).
- Modified the EPG scanner to avoid CPU load peaks (thanks to Steffen Becker for
reporting this one).
- Fixed support for Viaccess CAMs (thanks to Axel Gruber for helping to debug this).
|
|
- Fixed a new/delete malloc/free mismatch in ringbuffer.c (thanks to Stefan
Huelswitt for reporting this one).
- Improved CAM handling.
|
|
- Added 'Hrvatska radiotelevizija' and 'RTV Slovenija' to ca.conf (thanks to
Paul Gohn).
- Implemented actual user input for CAM enquiry menus.
- Since disk file systems apparently don't honor the O_NONBLOCK flag to read from
a file in non-blocking mode the cDvbPlayer now uses a non blocking file reader
class to make sure replay remains smooth even under heavy system load.
- Increased the maximum possible packet size in remux.c to avoid corrupted streams
with broadcasters that send extremely large PES packets (thanks to Teemu Rantanen).
- Added TS error checking to remux.c (thanks to Teemu Rantanen).
- Modified cRingBufferLinear to avoid excessive memmove() calls in 'Transfer Mode'
and during recordings, which dramatically reduces CPU load. Thanks to Teemu
Rantanen for pinpointing the problem with the excessive memmove() calls.
- Updated 'channels.conf' (thanks to Achim Lange).
- Added/improved Swedish language texts (thanks to Jan Ekholm).
- Fixed the description of the "Scroll pages" OSD setup parameter ('yes' and 'no'
were mixed up).
- Fixed handling the LOG_LOCALn parameters in the -l option (thanks to Dimitrios
Dimitrakos).
- Changed EIT processing to always read a full section.
- Fixed handling user defined CFLAGS in libdtv/libvdr/Makefile (thanks to Clemens
Kirchgatterer and Robert Schiele).
- Fixed skipping unavailable channels in the EPG scanner.
|
|
- Fixed the 'channels.conf' entries for "Studio Universal" and "Disney Channel".
- Fixed handling channels in the "Channels" menu in case there are ':@nnn' group
separators without names (thanks to Guy Roussin for reporting this one).
- The SVDRP command CHAN now also accepts channel IDs.
- Increased the timeout until an index file is considerd no longer to be written
(sometimes in time shift with heavy system load the index file was closed too
early by the replay thread).
- Implemented "Link Layer" based CAM support, which hopefully will solve the
problems with CAMs we had in the past. To use this you need the driver version
2002-01-08 or higher (with the new firmware supporting the "Link Layer" protocol).
- Added an EPG bugfix that moves the Subtitle data to the Extended Description in
case the latter is empty and the Subtitle exceeds some useful length.
- Since several channels put very long strings into the Subtitle part of their
EPG data, that string is now limited in length when used in a recording's
file name.
|
|
- Added new entries to 'ca.conf'.
- Fixed closing unused PID handles (thanks to Stefan Schluenss for reporting this
one).
- Added more examples to 'diseqc.conf' (thanks to Oliver Endriss).
- Fixed disabling multiple recordings on a single DVB card (comment out the definition
of the macros DO_REC_AND_PLAY_ON_PRIMARY_DEVICE and DO_MULTIPLE_RECORDINGS in
dvbdevice.c).
- Plugins can now have their very own OSD setup in the object they return from
a call to cPlugin::MainMenuAction(). In order to implement this, the return type
of cPlugin::MainMenuAction() had to be changed from (cOsdMenu *) to (cOsdObject *).
So in case you are compiling an existing plugin with this version of VDR and you
get an error message, simply change cOsdMenu to cOsdObject in the plugin's source
for the MainMenuAction() function.
Plugin authors who have so far (ab)used the cControl mechanism to implement their
own raw OSD should take a look at the new demo plugin 'osddemo'. It implements
a very primitive game that shows how a plugin can have its own raw OSD. Especially
look into cLineGame and see how it implements the Show() function. See also
the chapter on "User interaction" in PLUGINS.html.
- Added three new fields to the lines in 'channels.conf': NID, TID and RID. NID and
TID are the Network and Transport Stream IDs, respectively. RID is an additional ID
that can be used to tell apart channels that would otherwise be indistinguishable.
This is typically the case with radio channels, which may have the same NID, TID
and SID, but different "radio IDs". This new field is therefore called RID ("radio
ID"). Currently NID and TID are not yet used by VDR and should always be 0. The
RID is actually used when building the "unique channel ID", so if you have channels
in your 'channels.conf' file that cause error messages when loading, you can set
the RIDs of these channels to different values.
When reading an old 'channels.conf' these new fields will be automatically
initialized to 0 and once the file is written back to disk they will be appended
to the channel definitions.
Thanks to Régis Bossut for pointing out that with some providers the channels can
only be distinguished through the RID.
- The "unique channel ID" now contains an optional 5th part (the RID). See man vdr(5).
- Updated 'channels.conf.cable' and made some channels unique using the new RID
(thanks to Andreas Kool for pointing out the problems).
- Made some channels unique in 'channels.conf.terr' using the new RID.
- Extended the '-l' option to allow logging to LOG_LOCALn (n=0..7) by writing, for
instance, '-l 3.7' (suggested by Jürgen Schmidt).
- Now deleting stale lock files if they have a time stamp that is outside the window
'now +/- LOCKFILESTALETIME'. This improves things in cases where the system time
makes far jumps, so that a lock file might end up with a time stamp that lies
in the distant future (thanks to Oliver Endriss).
|
|
- Fixed saving the polarization parameter of channels that have a number in the
'source' parameter (thanks to Peter Seyringer for reporting this one).
- Updated 'channels.conf.terr' (thanks to Andy Carter).
- Updated 'channels.conf.cable' (thanks to Achim Lange).
- First step towards a "unique channel ID". The channel ID is a human readable
string, made up from several parameters of the channel's definition in the file
'channels.conf' (see man vdr(5) for details).
In order for the "unique channel ID" to work, all channel definitions now must
be unique with respect to the combination of their Source, Frequency and SID
parameters. You may have to fix your 'channels.conf' manually if there are error
messages in the log file when loading it. BE SURE TO MAKE A BACKUP COPY OF YOUR
'channels.conf' AND 'timers.conf' FILE BEFORE SWITCHING TO THIS VERSION, AND CHECK
VERY CAREFULLY WHETHER YOUR TIMERS ARE STILL SET TO THE RIGHT CHANNELS!
When reading an existing 'timers.conf', the channels will be identified as before
by their numbers. As soon as this file is written back, the channel numbers will
be replaced by the channel IDs. After that it is possible to manually edit the
'channels.conf' file and rearrange the channels without breaking the timers.
Note that you can still define new timers manually by using the channel number.
VDR will correctly identify the 'channel' parameter in a timer definition and
use it as a channel number or a channel ID, respectively. Also, the SVDRP commands
that return timer definitions will list them with channel numbers in order to
stay compatible with existing applications.
The channel ID is also used in the 'epg.data' file to allow EPG information from
different sources to be stored, which would previously have been mixed up in case
they were using the same 'service ID'. Note that the contents of an existing
'epg.data' file from a previous version will be silently ignored, since it doesn't
contain the new channel IDs. When inserting EPG data into VDR via SVDRP you now also
need to use the channel IDs.
Currently the EPG data received from the DVB data stream only uses the 'Source'
and 'Service ID' part of the channel ID. This makes it work for channels with
the same service IDs on different sources (like satellites, cable or terrestrial).
However, it doesn't work yet if the service IDs are not unique within a specific
source. This will be fixed later.
- Added missing SID parameters to 'channels.conf'. Some channels have been removed
since they are apparently no longer broadcasted.
- Removed dropping EPG events from "other" streams that have a duration of 86400
seconds or more (was introduced in version 1.1.10). This has become obsolete by
the modification in version 1.1.13, which fixed fetching the current/next information
to handle cases where the duration of an event is set wrongly and would last beyond
the start time of the next event. Besides, the change in 1.1.10 broke handling EPG
data for NVOD channels.
- Fixed a compiler warning regarding cMenuChannels::Del() and MenuTimers::Del() hiding
the base class virtual functions.
|
|
- Completely switched to the new CVS HEAD version of the linux-dvb driver.
The NEWSTRUCT compile time switch is now obsolete. The required driver is now
the CVS HEAD version dated 2002-11-01 or later.
- Adjusted the INSTALL file to the 1.1.x version.
- Only accepting key presses from the current remote control when learning (thanks to
Oliver Endriss).
- Fixed the EPG scanner, which broke 'Transfer Mode' as soon as it kicked in
(thanks to Oliver Endriss for reporting this one).
- Fixed handling audio tracks in cDvbDevice.
- Updated channels.conf.terr (thanks to Uwe Scheffler).
- Fixed displaying the group separators in the channel display (thanks to Martin
Hammerschmid for pointing out this one).
- The Makefile now includes the file Make.config (if present in the VDR source
directory), which allows the user to overwrite several settings with individual
values (suggested by Andreas Schultz). The VDR distribution archive does not
contain this file in order to not overwrite a user defined file. There is a
Make.config.template which contains the default values of the macros the user
can overwrite.
- Since there have been changes to the 'newplugin' script authors of plugins
may want to newly create their plugins' Makefiles with the new version of this
script, and adapt them to their individual needs (make sure you don't overwrite
your existing plugin directory - make a backup copy first!).
- Fixed reading EPG data via the SVDRP command PUTE (it changed the current
service ID).
- Fixed closing all dup'ed file descriptors in cPipe.
- Implemented a plugin interface for additional audio processing (see PLUGINS.html
under "Dolby Digital").
The functionality of the '-a' command line option has been reactivated.
Since the author doesn't have any Dolby Digital equipment this may or may not
work as expected. There may still be some places where a call to cAudios::Clear()
or cAudios::Mute() is necessary. Those with Dolby Digital equipment should please
take a look at this and maybe send patches.
Replaying Dolby Digital in ways other than through VDR's '-a' option will have to
be implemented as plugins. Those who have written patches for VDR version 1.0.x
should convert their work into the proper plugins for version 1.1.x.
Note to authors of cPlayer derived plugins: please read the modified comments
in device.h regarding the member functions cDevice::Clear(), cDevice::Mute() and
cDevice::PlayAudio(). Derived classes must call these base class member functions
to make sure all registered cAudio objects are properly handled. Also note that
the return type of cDevice::PlayAudio() has been changed to 'void', since this
function always has to accept the entire data block immediately and there is
nothing that could be reasonably done in case an error occurs in one of the
cAudio objects.
- Now checking the driver's DVB_API_VERSION in dvbdevice.h. Since VDR now requires
a driver dated 2002-11-01 or later the MIN_DVB_DRIVER_VERSION_FOR_TIMESHIFT and
DVB_DRIVER_VERSION stuff has been replaced with DO_REC_AND_PLAY_ON_PRIMARY_DEVICE,
which can be used to disable simultaneous recording and replaying on the primary
DVB device in case there are problems with this.
|
|
- Added cDevice::DeviceNumber() to get the number of a device, not counting any
gaps that might be in the index count.
- Fixed fetching the current/next information to handle cases where the duration
of an event is set wrongly and would last beyond the start time of the next
event.
- Adapted type names to the new HEAD version of the driver (which the previous
NEWSTRUCT branch has been merged into). Note that to use this driver version
you still need to add NEWSTRUCT=1 to the make call when building VDR. You
need a HEAD version of the LinuxDVB driver dated 2002-10-11 or later to compile
VDR with NEWSTRUCT=1.
- Fixed radio channels in channels.conf.cable (thanks to Robert Schiele and Uwe
Scheffler).
- Fixed switching the video format in the Setup/DVB menu (thanks to Uwe Scheffler
for reporting this one).
- Reactivated full handling of second audio PID (even in 'Transfer Mode').
- Fixed a crash when closing down with remote control plugins (thanks to Oliver
Endriss helping to debug this one).
- Commands in the file 'commands.conf' can now have a '?' at the end of their
title, which will result in a confirmation prompt before executing the
command.
- Changed a few leftover 'new char[...]' to MALLOC(char, ...).
- If a command executed from the "Commands" menu doesn't return any output, the
OSD will now be closed automatically.
- The SVDRP command PUTE now triggers an immediate write of the 'epg.data' file
(suggested by Gerhard Steiner).
- The new configuration file 'reccmds.conf' can be used to define commands that
shall be executed from the "Recordings" menu; see MANUAL and 'man vdr(5)' for
details (suggested by Gerhard Steiner).
|
|
- Fixed a missing Flush() call in the remote control learning procedure (thanks
to Oliver Endriss).
- Modified channel handling to cover all parameters necessary for DVB-C and DVB-T
(see man vdr(5) for the meaning of the additional parameters stored in the field
previously named 'polarisation'). Thanks to Uwe Scheffler and Andy Carter for testing.
If you have a system with different kinds of DVB cards, like DVB-T and DVB-C,
for instance, there is no more need to distinguish the channels through the
'Ca' parameter in order to assign them to the various DVB cards. This is now
taken care of by the "source" parameter. So a channel marked as "terrestrial",
for example, will only be received on DVB-T cards.
Note that the cChannel class has been moved into a separate file (channels.[ch]),
and that all data members have been made private and are now only accessible
through member functions. You may have to change any plugin code that accesses
cChannel data accordingly.
- The new configuration file 'sources.conf' contains the various signal sources
(satellites, cable and terrestrial) which are used in 'channels.conf' and
'diseqc.conf' (thanks to Reinhard Walter Buchner for adding some satellites to
'sources.conf' and Oliver Endriss and Lauri Tischler for testing and debugging).
- The 'diseqc' parameter in the channel definitions has been redefined to hold the
"source" of the given channel (which can be either a satellite, cable or terrestrial).
For compatibility with channels.conf files from older versions, numeric values in
this parameter will be tolerated, but they have no meaning. If you want to use
DiSEqC you will need to replace these old values with the proper source identifiers
defined in the new configuration file 'sources.conf'. See how this is done in the
'channels.conf' file that comes with the VDR package.
- The new configuration file 'diseqc.conf' can be used to set up the individual
diseqc configuration (see man vdr(5) for a description of the file format).
- The "Edit channel" menu has a new entry "Source:" in which the source of this
channel can be selected (either a satellite, cable or terrestrial). The set of
parameters at the end of this menu will change according to the type of source.
- The "Use DiSEqC" parameter in the "Setup/LNB" menu has been moved to the beginning
of the list and disables the rest of the parameters when set to "yes", since these
are now only meaningful if DiSEqC is _not_ used.
- Removed some unnecessary #includes from eit.c and changed cMenuRecordings::Del()
to cMenuRecordings::Delete() to avoid warnings in gcc-3.2 (thanks to Andreas
Schultz for pointing this out).
- Improved skipping channels that are (currently) not available (thanks to Stefan
Huelswitt).
- Updated channels.conf.terr and channels.conf.cable (thanks to Uwe Scheffler).
- Fixed a bug when pressing the "Blue" button in the main menu without having
displayed it (thanks to Oliver Endriss for reporting this one).
|
|
- Fixed an incomplete initialization of the filter parameters in eit.c (thanks
to Jeremy Hall).
- Fixed the 'newplugin' script for use with the NEWSTRUCT driver (thanks to
Andreas Schultz for reporting this one). If you have already created a plugin
directory and Makefile with 'newplugin', please apply the following patch to it:
-------------------------------------------------------
--- Makefile 2002/06/10 16:24:06 1.4
+++ Makefile 2002/09/17 15:36:36 1.5
@@ -15,7 +15,12 @@
### The directory environment:
+ifdef NEWSTRUCT
+DVBDIR = ../../../../DVB/include
+DEFINES += -DNEWSTRUCT
+else
DVBDIR = ../../../../DVB/ost/include
+endif
VDRDIR = ../../..
VDRINC = $(VDRDIR)/include
LIBDIR = ../../lib
@@ -34,7 +39,7 @@
INCLUDES = -I$(VDRINC) -I$(DVBDIR)
-DEFINES = -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
+DEFINES += -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
### The object files (add further files here):
-------------------------------------------------------
This is the diff for the 'setup' example that comes with VDR, so your line
numbers may be different.
- Added a missing 'public' keyword in device.h (thanks to Martin Hammerschmid).
- Fixed a race condition when starting 'Transfer Mode'.
- Rearranged the remote control key handling to allow plugins to implement
additional types of remote controls (see PLUGINS.html, section "Remote Control").
The previously used files 'keys.conf' and 'keys-pc.conf' have been replaced
by the file 'remote.conf', which holds the key definitions of all remote controls.
- The LIRC remote control keys are now handled just like the keyboard and RCU keys.
This means that you can use the lircd.conf file as is for your remote control,
without the need of editing it to make the key names the same as used in VDR.
When first starting VDR it will go into the "Learning keys" mode and ask you
to press the various keys. The resulting key assignment will be stored in
the file 'remote.conf'.
Since I have no way of testing the LIRC support, I hope I didn't break it in
the process...
- While learning the remote control keys it is now possible to press the 'Menu'
key to skip the definition of keys that are not available on your particular
RC unit.
- Fixed handling DVD subtitles in the SPU decoder (thanks to Andreas Schultz).
- Avoiding restarts due to 'panic level' when switching channels on the primary
device during EPG scan.
|
|
- Removed a superfluous error message from cLockFile::Unlock() (reported by
Helmut Auer).
- Fixed starting a recording of the current channel with only one DVB card
(thanks to Stefan Huelswitt for his help).
- A previous 'Transfer Mode' is now automatically re-started after a replay
stops.
- Only calling cStatus::MsgChannelSwitch() if a channel is actually going to
be switched or has actually been switched successfully (thanks to Stefan
Huelswitt).
- The EPG now drops events from "other" streams that have a duration of 86400
seconds or more (this avoids bogus entries like "PROGRAMMES ALLEMANDS").
- Fixed opening /dev/video in cDvbDevice::GrabImage() in case of NEWSTRUCT
driver (thanks to Andreas Schultz).
- Added a missing StripAudioPackets() to cDvbPlayer::Action() (thanks to
Stefan Huelswitt).
- Added an EPG bugfix for the latest VOX EPG data format.
|
|
- Fixed replaying the last few seconds of a recording.
- Added some missing #includes to files in libdtv for gcc 3.2 (thanks to Jürgen
Zimmermann).
- Added cDevice::NewOsd() to allow a derived cDevice class to implement its own
OSD capabilities (thanks to Andreas Schultz).
- Added cPalette::AllColors() for plugins that need to get the color entries of
a cPalette (see osdbase.h).
- The new SVDRP command CLRE can be used to clear the entire EPG data (suggested
by Matthias Schniedermeyer).
- Fixed handling one-shot timers that were already recording and had their start
time changed into the future (thanks to Matthias Schniedermeyer for reporting
this one).
|
|
- Adapted VDR to the NEWSTRUCT driver. To use the new driver, compile VDR with
'make NEWSTRUCT=1' (thanks to Holger Wächtler for some valuable advice).
By default it currently still uses the old driver.
- Added some missing #includes (thanks to Martin Hammerschmid).
- Changed the log error message "can't record MPEG1!" to "error in data stream!",
since the mentioning of MPEG1 has irritated many people.
- Consistently using malloc/free and new/delete (thanks to Andreas Schultz).
- Temporarily made cDevice::ProvidesCa() virtual (Andreas Schultz needs this
in his DXR3 plugin).
- cDevice no longer exposes a file handle to cPlayer. A derived cPlayer class
can now call DevicePoll() to see whether the replay device is ready for
further data. A derived cDevice class must implement Poll() and shall
check if any of its file handles is ready for data.
- Implemented several replay modes to allow players that play only audio (thanks
to Stefan Huelswitt).
- Improved cCondVar::Wait() and implemented cCondVar::TimedWait() (thanks to
Stefan Huelswitt).
- VDR no longer gives up if there is no DVB device. It continues to work if
there is at least one device, either a DVB device found by the core VDR code
itself, or a device implemented by a plugin.
|
|
- Improved the VDR Makefile to avoid a warning if the '.dependencies' file does
not exist, and also using $(MAKE) to call recursive makes.
- Changed the name of the 'package' target in the plugin Makefiles to 'dist'
(following the suggestions in the "GNU Make" manual). If you already have started
a plugin project, you may want to change this in your Makefile accordingly.
- Improved the plugin Makefile to avoid a warning if the '.dependencies' file does
not exist, and also using $(shell...) to get the version numbers. If you already have
started a plugin project, you may want to change this in your Makefile accordingly.
- Fixed some function headers to make them compile with gcc 3.x (thanks to
Gregoire Favre).
- Fixed the cutting mechanism to make it re-sync in case a frame is larger than the
buffer (thanks to Sven Grothklags).
- Added an error message if the directory specified in the '-L' option can't be
accessed (suggested by Stefan Huelswitt).
- Rearranged OSD class names to make 'cOsd' available for the main OSD interface.
- Completely moved OSD handling out of the cDvbApi class, into the new cOsd.
- Implemented cStatus to allow plugins to set up a status monitor.
See PLUGINS.html for details.
- Moved the cEITScanner out of dvbapi.h/.c, into the new eitscan.h/.c.
- Added Swedish language texts (thanks to Tomas Prybil).
- Fixed parsing 'E' records in epg2html.pl (thanks to Matthias Fechner for pointing
out this one).
- Removed compiler option '-m486' to make it work on non-Intel platforms. If you
have already started a plugin project, you may want to make sure you remove this
option from your existing Makefile.
- Completely rearranged the recording and replay functions to make them available
to plugins.
- Replay is now done in a single thread (no more syncing between input and output
thread necessary).
- It is now possible to record several channels on the same transponder with "budget
cards". VDR automatically attaches a recording timer to a card that already
records on the appropriate transponder. How many parallel recordings can actually
be done depends on the computer's performance. Currently any number of recordings
gets attached to a card, so you should carefully plan your timers to not exceed
the limit. On a K6-II/450 it was possible to record three channels from transponder
12480 with a single WinTV NOVA-S.
- Timers that record two successive shows on the same channel may now overlap and
will use the same DVB card. During the time where both timers record the data
is simply saved to both files.
- The following limitations apply to this version:
+ Transfer mode doesn't work yet.
+ The '-a' option (for Dolby Digital audio) doesn't work yet.
+ Switching between different language tracks doesn't work yet.
+ Cutting doesn't work yet.
|
|
- Changed the cPlugin::Start() function to return a boolean value that indicates
if the plugin will not be able to perform its task (suggested by Stefan Huelswitt).
- Added the cPlugin::Housekeeping() function (suggested by Stefan Huelswitt).
- Updated channels.conf.cable (thanks to Uwe Scheffler).
- Added 'insert' capabilities to cList (suggested by Stefan Huelswitt).
- Changed the 'package' target in the plugin's Makefile to produce a package that
expands to a directory with just the plugin name and version number (suggested
by Stefan Huelswitt).
- Made the config directory available to plugins (suggested by Stefan Huelswitt).
See PLUGINS.html, section "Configuration files" for details.
- Improved the [eid]syslog() macros, so that the LOG_... macros don't need to be
given any more.
|
|
- Fixed a problem with wrong EPG data in the Schedules menu (thanks to Tobias
Kerner, problem was initially reported by Michel Moster, but somehow I had
misplaced his message...).
- Added Spanish language texts (thanks to Ruben Nunez Francisco).
- Fixed resetting the "First day" timer parameter once the timer actually starts
recording.
- Fixed the still picture workaround in case the progress display is active
(thanks to Gerald Raaf).
- Fixed a problem with accessing the epg.data file before it is fully written
(thanks to Thilo Wunderlich for reporting this one).
- Now the EPG scan skips channels that have their 'Ca' parameter explicitly set
to an other DVB card (suggested by Sergei Haller).
- Fixed a possible hangup when reading a broken epg.data file (thanks to Henning
Holtschneider for pointing this one out).
- Fixed a bug in the editing process in case a previously edited file with the
same name was manually deleted on a system with more than one video directory
(thanks to Dirk Wiebel for reporting this one).
|
|
- Fixed restoring CICAM setup values for a fourth DVB card (thanks to Klaus Wolf).
- Completed internationalization of OSD texts (thanks to Hannu Savolainen,
Arnold Niessen, Paulo Lopes, Jean-Claude Repetto, Alberto Carraro, Matjaz
Thaler and Truls Slevigen).
- Improved file I/O in case of EINTR, which may occur e.g. with heavy system
load (thanks to Werner Fink).
- Now writing the title of a recording into the 'summary.vdr' file.
- Workaround for displaying still frames with the unpatched LinuxDVB driver
(if anybody ever finds out why the unpatched driver doesn't display VDR's
still frames, please let me know).
- When executing a command from the "Commands" menu, the title of that command
is now immediately shown in the status line (followed by "...") to give the
user some feedback that the command is being executed, which is especially
important if this takes some time.
- Fixed scrolling the "Channels" menu in case the cursor ends up on a group
delimiter (thanks to Bernd Zierath for helping to debug this one).
- Added manual pages vdr(1) and vdr(5) (which made the FORMATS file obsolete).
- New command command line option '-V' to display the VDR version.
- Adjusting column width for channel numbers in case there are more than 999
channels.
- Checking the return value of '...FileRady...' calls in dvbapi.c for better
performance under heavy system load.
- New 'make' target 'install', which copies the manual pages and executables
to their appropriate system locations and creates the /video directory if
it doesn't exist yet.
- Automatic hotkey assignment is now suppressed if the first entry in
commands.conf starts with a digit in the range '1'...'9', followed by a blank.
- Fixed a bug in switching back the replay mode display in time shift mode
(thanks to Achim Lange for reporting this one).
- Fixed a bug in the 'First day' timer parameter for timers that record over
midnight.
- Added units to Setup parameters.
- Changed time entry in the 'Jump' command during replay, so that it is filled
up from right to left.
- Now using statfs() to determine the amount of free disk space, which avoids
the use of an external 'df' command (thanks to Ruben Nunez Francisco).
- Fixed skipping the next hit of a repeating timer (thanks to Rainer Zocholl
for reporting this one).
- Fixed a bug when a timer records over midnight of a day that had a change in
Daylight Saving Time.
- Added Polish language texts (thanks to Michael Rakowski).
- Fixed a bug in parsing group separators in channels.conf (thanks to Henning
Holtschneider for reporting this one).
- Changed the default 'Ok' key when using the PC keyboard from '5' (in the
numeric block) to 'Enter', because the '5' key didn't work on keyboards with
the F-keys on top.
- Fixed a bug in the EPG bugfix mechanism if the extended description is shorter
than 3 characters (thanks to Andreas Schultz).
|
|
- Added 'Ca' code 201 for 'Cryptoworks, GOD-DIGITAL' to 'ca.conf' (thanks to
Bernd Schweikert).
- Fixed avoiding the primary DVB interface in case Setup.PrimaryLimit is 0.
- Fixed handling CICAM settings if the first one of a DVB card was FTA.
- Fixed reacting on changes in CICAM settings (needed to restart VDR before).
- The "Blue" button in the "Main" menu now works as "Stop" button if a recording
is currently being replayed.
- New command line option '-m' to mute audio of the primary DVB device at
startup (suggested by Mirko Günther).
- The new SVDRP command VOLU can be used to control the audio volume (suggested
by Mirko Günther).
- Fixed resetting 'mute' state when setting the volume to a non-zero value.
- Added log messages when deleting recordings in case the disk runs full while
recording.
- Fixed closing a pipe (used for replaying Dolby Digital audio), which
sometimes left 'zombie' processes behind (thanks to Werner Fink for helping
to debug this one).
- Now starting the Dolby Digital output thread only if the recording actually
contains Dolby Digital audio data (thanks to Werner Fink).
- Implemented OSD for Volume and Mute (works only if there is no other OSD
activity, but this should be no problem for normal use).
- Changed the MANUAL description of the "Conditional Access" setup parameters
to reflect the actual "CICAM DVBn m" notation in the "Setup" menu.
- The new Setup parameter "Use time from transponder" can be used to define which
transponder shall be used to set the system time (see MANUAL for details).
If you have been using the SetSystemTime option previously, you now MUST
select a channel that you trust to have a reliable time base.
- Grouped the Setup parameters into several sub-menus, so that each group of
parameters fits on a single screen - unless the height of the OSD has been
set to a small value (based on code from Markus Lang).
- Changed the title of the "Main" menu to "VDR".
- Fixed displaying a system message while the replay mode is being shown.
- Physically removing a deleted recording if one with the same name shall be
deleted again.
- The "Left" and "Right" keys are now used to page up and down in text displays
(like the EPG descriptions or the results of commands executed from the
"Commands" menu).
- Fixed high CPU usage in transfer mode.
- Replaced 'killproc' with 'killall' in 'runvdr', since apparently 'killproc'
is not available by default on some Linux distributions, whereas 'killall' is.
Please check if your system provides 'killall' - if it doesn't, please change
this back in 'runvdr' and report this (thanks to Achim Lange).
- The "Commands" menu now automatically assigns number keys as hotkeys to the
commands. If you have preceeded your commands with digits you may want to
remove these from your 'commands.conf' file.
- The new Setup item "Restart" can be used to force a complete restart of VDR,
including reloading the driver. Note that this can only work if VDR and the
driver are wrapped into a mechanism that actually performs this action if VDR
exits. The 'runvdr' script can be used for this purpose.
- Refined texts of the "Setup" menu.
|
|
- Fixed parsing 'E' records in epg2html.pl.
- Fixed a deadlock when switching channels via Schedule/Now|Next/Switch (reported
by Martin Hammerschmid).
- Changed the meaning of the 'Ca' parameter in 'channels.conf'. Each channel can
now define which decryption method it needs in order to be accessed. The new
configuration file 'ca.conf' contains the defined values, and the default
'channels.conf' has been modifed to contain the new values for 'Premiere World'
and 'ORF'. If you use the default 'channels.conf' and have the conditional
access hardware to receive encrypted channels, please make sure you copy the
file 'ca.conf' into your /video directory (or wherever your configuration files
are located) and go into the "Setup" menu and set the CICAM values according
to your hardware setup. Currently there are two possible CICAM entries per
DVB card, so any card can implement up to two different conditional access
modes (besides the default "Free To Air" mode, which is always assumed to be
available on any DVB card).
- Updated French language texts (thanks to Jean-Claude Repetto).
|
|
- Fixed a crash in case there is no 'epg.data' at program start (thanks to
Andreas Schultz).
|
|
- Added scanning for EPG data for another 4 days on channels that support this
(thanks to Oleg Assovski).
- Removed '#define VFAT 1' from recording.c (was a leftover from testing).
- Fixed the "Low disk space!" message (thanks to Sergei Haller).
- Added the TPID to Hessen-3 in 'channels.conf' (thanks to Sergei Haller).
- Fixed a crash when replaying with DEBUG_OSD=1 (thanks to Stefan Huelswitt).
- Implemented the "First day" parameter for repeating timers. See FORMATS for
information about the enhanced 'timers.conf' file format, and MANUAL for
a description of the new item in the "Edit Timer" menu and the enhanced
functionality of the "Blue" button in the "Timers" menu.
- When deleting a recording that is currently still being recorded, the related
timer will now automatically be terminated. If this is a repeating timer, it
will receive a "First day" setting that skips the timer for this day.
- Fixed closing all unused file descriptors when opening a pipe (thanks to
Werner Fink).
- Instant recordings now take the EPG data from the point in time at 5 minutes
from the start time of the recording. In order for this to work the 'active'
parameter of a timer now uses the second bit to indicate that this is an
"instant" recording (see FORMATS for details).
- Fixed the SVDRP GRAB command in case the video device can't be opened (thanks
to Adrian Stabiszewski).
- At startup the data written into 'epg.data' is now read into the EPG data
structures. In order for this to work, the 'E' record has been extended to
(optionally) contain the 'table ID' (see FORMATS for details).
- The new SVDRP command PUTE can be used to put EPG data into the EPG list.
See FORMATS for details about the required data format.
- Taking the German umlauts 'as is' when compiled with VFAT.
- The new Setup parameter RecordDolbyDigital can be used to generally turn off
recording the Dolby Digital audio channels in case you want to save disk space
or don't have the equipment to replay Dolby Digital audio.
- Reading the 'setup.conf' file no longer terminates in case of an error, but
rather attempts to read the rest of the file.
- Removed DVD support from the core VDR source, since the current version from
Andreas Schultz is already much further developed (DVD menu navigation) and
the concept of "additional players" in VDR is going to change in version 1.1.0,
where a new "plugin" interface shall allow the easy implementation of new
players without having to patch the core VDR source. Until then, Andreas has
agreed to provide his DVD support as a completely external patch.
- The contents of the distribution archive now contains the directory name with
the current version number, as in 'vdr-1.0.0pre1/...' in order to avoid
inadvertently overwriting an existing VDR directory with a new version.
- Added a missing error message in SVDRP command LSTC in case the given channel
can't be found.
|
|
- Fixed a bug in moving timers or channels to the last position in the list
(thanks to Matthias Schniedermeyer for helping to debug this one).
- Changed the estimated data rate for calculating the remaining disk capacity
to 25.75 MB/min.
- Only reporting the 'EPG bugfix statistics' if there really were any fixes.
- Added Finnish language texts (thanks to Hannu Savolainen).
- Reverted to the previous way of searching for the EPG record of the current
recording in case of a periodic timer (i.e. taking the one that is in the
middle between start and end time).
- Added a typedef for 'in_addr_t' to make it work with glibc < 2.2 (thanks to
Jürgen Schmidt).
- When the last entry in a "Recordings" menu page is deleted, that page is now
automatically closed (suggested by Uwe Freese).
- Changed the default name for instant recordings to "TITLE EPISODE" (avoiding
the '-').
- If Setup.ShowInfoOnChSwitch is set to "no", the box for the EPG display is no
longer shown (thanks to Andy Grobb).
- If compiled with VFAT=1, characters that can't be handled by a VFAT system are
now encoded to '#XX'.
- When the user presses the "Power" button and there is a timer about to start
recording within Setup.MinEventTimeout minutes, there is now a confirmation
prompt telling the user that there is an upcoming timer event.
- If a recording has no episode title, the trailing '~' is no longer shown in
the progress display.
|
|
- Updated channel settings for 'N24' (thanks to Andreas Gebel).
- Fixed handling hierarchical recordings menu in case of directories starting
with the same sequence of characters.
- Fixed handling timers on the 29th, 30th or 31st of a month in case the next
month has less than 31 days.
- Added a description of the sort order of individual episodes in the
recordings menu to the MANUAL.
- Removed the EPG bugfix for "Title / Subtitle" cleanup. Apparently Pro-7 has
finally stopped this nasty habit.
- Added some EPG bugfix statistics (printed to the log file every time the EPG
data is cleaned up and when VDR is terminated). Maybe somebody in charge of
the EPG data at the listed channels will read this and take the necessary
actions to fix these things...
- Changed the [dei]syslog macros in tools.h to use a variable number of args,
thus making it safe to use them in nested 'if/else' statements.
- Fixed error handling in establishing an SVDRP connection (thanks to Davide
Achilli) for pointing this out).
- The new configuration file 'svdrphosts.conf' is now used to define which
hosts may access the SVDRP port (by default only 'localhost' has access).
See FORMATS for details.
- The special keywords TITLE and EPISODE can now be used in timer file names
(see MANUAL and FORMATS for details).
- The new setup parameter NameInstantRecord can be used to define how an
instant recording will be named (see MANUAL for details).
- When looking for the EPG record of the timer that starts a recording, now
that record is taken which covers the time calculated as
'start + (Setup.MarginStart * 2) + 1)' in order to have a better chance of
hitting the right record in case of an instant recording. Timers that start
further in the future should always be programmed via the "Schedules" menu.
- The special VPIDs '0' and '1' are now used to enable recording radio channels.
Actually '0' should be enough, but '1' must be used with encrypted channels
(driver bug?). Note, though, that since VDR is mainly a *video recorder*, some
features like, e. g., the progress display, may not work as expected with
radio recordings. Thanks to Michael Paar.
- Fixed a problem with the ERR macro defined by ncurses.h (thanks to Artur
Skawina).
|
|
- Fixed setting the OSD size in the 'Confirm' interface call (thanks to
Deti Fliegl).
- Removed the 'read incomplete section...' error message in the EIT processor.
- Fixed channel data for "DW TV" (thanks to Axel Gruber).
- Added DPID to "PREMIERE MOVIE 1" in channels.conf.cable (thanks to Stephan
Schreiber).
- Prepared the OSD functions for multiple overlapping windows.
- Removed the check to see whether the system time is running linearly.
- Improved performance of SVDRP command entry.
- Removed EPGBugfixLevel '3' - after more than a year Pro-7 finally managed to
broadcast the correct timestamps for EPG events between 0:00 and 6:00!
- Fixed failing watchdog timer if program hangs in OSD activities (thanks to
Carsten Koch).
- No longer requiring 'libncurses' if compiling without DEBUG_OSD=1 and
REMOTE=KBD (thanks to Lauri Pesonen).
- The "Recordings" menu now displays a hierarchical structure if there are
subdirectories for the recordings. This can be controlled through the
"RecordingDirs" parameter in the "Setup" menu.
See "MANUAL/Replaying a Recording" for details.
- Improved speed of setting the Help button texts.
- Fixed handling file names that contain single quotes (') or dollar signs ($)
in the call to the shutdown command (option '-s') and the recording command
(option '-r').
- Improved error handling in the editing process; the resulting file will be
deleted if an error occured.
- A message is now prompted at the end of the editing process, indicating
whether the process succeeded or failed.
- Fixed setting the LastActivity timestamp after a shutdown prompt (thanks to
Sergei Haller).
- A message is now prompted if free disk space becomes low during recording.
- The editing process now calls AssertFreeDiskSpace() to remove deleted
recordings if the disk becomes full.
- The "Main" menu now displays in its title the used disk space (in percent)
and the estimated free disk space (in hh:mm), assuming a data rate of 30 MB
per minute.
- Activating the "Recordings" menu now displays "scanning recordings..." to
give the user some feedback in case this takes longer.
- Status messages are now displayed centered.
- Removed the 'Tools' subdirectory from the VDR archive. All contributed tools
can now be found at ftp://ftp.cadsoft.de/pub/people/kls/vdr/Tools.
|
|
- Completed storing the current audio volume in the setup.conf file (thanks
to Andy Grobb).
- Fixed closing the progress display with the "Back" key when in trick mode
and Setup.ShowReplayMode is enabled (thanks to Stefan Huelswitt).
- New SVDRP commands LSTR and DELR to list and delete recordings (thanks to
Thomas Heiligenmann).
- Fixed a crash when pressing the '2' button while replaying a DVD.
- Updated 'channels.conf' for the "Bundesliga" channels of Premiere World
(thanks to Mel Schächner).
- Changed the tuning code to use FrontendInfo to detect the type of DVB card.
- Removed the recursion stuff from cThread (cMutex already does this).
- Fixed handling the repeat function in the channel display.
- Avoiding multiple EPG entries for the same event (thanks to Rolf Hakenes
for some valuable information on how to do this).
- A recording on the primary interface can now be stopped to make it continue
on an other free DVB card (if one is free at the moment). See MANUAL for
details.
- Added some missing teletext PIDs (thanks to Norbert Schmidt).
- Added PTS to the converted PCM audio when replaying a DVD (thanks to Andreas
Schultz). Now the audio and video of a DVD replayed over the DVB card's A/V
out should always be in sync.
- Fixed handling the "Power" key in case Setup.MinUserInactivity is set to 0 to
disable automatic shutdown.
- Added a fifth parameter to the 'shutdown' call that indicates the reason for
this shutdown request (see INSTALL).
- Fixed releasing 'index' memory after recording or playback.
- Fixed ejecting a DVD while it is being replayed.
- Removed all video overlay stuff from cDvbApi and SVDRP. Guido Fiala's new
'kvdr' version 0.4 now does these things itself. As a consequence of this you
will now need to use kvdr 0.4 or later.
- The device /dev/video is now opened only if necessary (to GRAB an image),
allowing other programs (like 'kvdr', for instance) to use that device.
|
|
- Implemented a lock file to prevent more than one instance of VDR from removing
files from the video directory at the same time.
- The new setup parameter SplitEditedFiles can be used to control whether or
not the result of an editing process shall be written into separate files.
- Fixed handling repeat function when using LIRC (thanks to Matthias Weingart).
- The shutdown program (defined with the '-s' option) now also gets the channel
number and recording title of the timer (see INSTALL).
- New channel data for 'Premiere One', 'Premiere X-Action', 'Fox Kids Türkce'
and 'N24' (thanks to Andreas Share, Ulrich Röder, Uwe Scheffler and Simon
Bauschulte). Note that if you are using the default 'channels.conf' or
'channels.conf.cable' files you may need to check any exiting timers to see
whether they still use the correct channel number.
- Fixed the "EPG bugfix" (sometimes had duplicate information in Subtitle and
Extended Description).
- Fixed checking for valid video device when setting the video mode.
- The external command 'sort' is no longer required. VDR now sorts the list of
recordings itself, making sure that recordings that stem from repeating timers
are sorted chronologically. Sorting is done according to the setting of the
current locale, so you may want to make sure LC_COLLATE is set to the desired
value (see INSTALL).
- Fixed handling 'newline' characters in EPG texts (thanks to Rolf Hakenes for
an improved version of his 'libdtv').
Newline characters are always mapped to a single "blank" in VDR, because they
would otherwise disturb the Title and Subtitle layout in the channel display
(where these are assumed to be single line texts) and would have to be
specially handled in the 'epg.data' file and the LSTE command in SVDRP.
- Mapping ` ("backtick") characters in EPG texts to ' (single quote).
- Fixed timers starting and ending at unexpected times. 'localtime()' was not
thread safe, now using localtime_r().
- Removed the "system time seen..." message.
- Fixed a bug in the replay mode display when pressing the Green or Yellow
button while in trick mode (thanks to Stefan Huelswitt)
- Closing all open file descriptors when calling external programs.
- The menu timeout now also works when pressing the "Back" button during replay
to enter the "Recordings" menu.
- Updated 'channels.conf' for the "Bundesliga" channels of Premiere World
(thanks to Helmut Schächner).
- Fixed reading timers.conf and channels.conf that contain blanks after numeric
values.
- Fixed handling trick modes near the beginning and end of a recording.
- Pressing the "Back" button while replaying a DVD now leads to the DVD menu.
|
|
- Made VDR compile with libdvdread-0.9.1 (thanks to Andreas Schultz).
Note that you now _need_ version 0.9.1 of libdvdread to compile VDR with
DVD support!
- Several fixes to the replay mode display (thanks to Stefan Huelswitt):
no more replay mode display when pressing the "Green" or "Yellow" button
(Skip +/-60s); fixed timeout when pressing '0' to set an editing mark while
the progress display is not shown; mode display is shown after progress
display is closed; pressing "Ok" while the mode display is on brings up
the progress display; no more unnecessary display of "normal play mode".
- Supplying the new frontend parameter 'Inversion' (currently it is always
set to INVERSION_AUTO, which should work with all channels on Astra).
- Removing unnecessary double quotes from EPG Subtitle in EPGBugfixLevel >=1.
- EPG info is now updated if the contents changes but the ID remains the same.
- Fixed handling SVDRP commands whith more than one blank between the command
word and the options.
- The current volume setting is now saved to setup.conf and restored at the
next program start.
- New command line option '-r' to define a command that gets called before and
after each recording (see INSTALL for details).
- Implemented a check to see whether the system time is running linearly.
- Writing the current time (as seen by VDR) into the log file when starting
a timer recording (this may help debugging cases where timers don't start
at the expected time).
- Made the volume, mute and power keys work when a menu is active, too (thanks
to Matthias Weingart).
|
|
- The "channel not sync'ed" log message now also lists the card number.
- Now using the EIT services from 'libdtv' (thanks to Rolf Hakenes), which
provides EPG information for NVOD ("Near Video On Demand") channels.
- Doing some bug fixing on the EPG data (some tv stations apparently have
their own idea on how to fill in the data...). The level up to which EPG
bugs are fixed can be controlled with the EPGBugfixLevel parameter in the
"Setup" menu (see MANUAL for details, and cEventInfo::FixEpgBugs() in eit.c
for the actual implementation).
- Fixed broken recordings after a driver buffer overflow.
- Fixed the chirping sound after Pause/Play of a DVD (thanks to Andreas
Schultz).
|
|
- Fixed displaying colored button texts that are too long.
- Suppressing replay progress display when replaying a DVD.
- Updated channels.conf.cable (thanks to Uwe Scheffler).
- Updated French OSD texts (thanks to Jean-Claude Repetto).
- Improved AC3 decoding when replaying DVDs (thanks to Matjaz Thaler).
- Fixed handling DVB card indexes when using only one card in a multi-card
system.
- Changed the 'Eject DVD' button text to a simple 'Eject' (the German text
was too long...).
- Made the font file generation more stable (thanks to Artur Skawina).
- Changed the default value for the "DiSEqC" setup parameter to "off".
- The new command line option '-E' can be used to define where the EPG data
shall be written to. This is especially useful if VDR runs in a system
that turns off the video disk when it is not used, and therefore needs
to write the EPG file to a ramdisk (or turn off writing it alltogether).
See 'vdr --help' for details.
- Making sure the disk is up and running before starting recording (this
is important for systems that turn off the video disk when it is not used).
- Added the "Jump" function in replay mode (thanks to Stefan Huelswitt).
See the description of the "Red" key in MANUAL under "Replay Control" for
details.
- Fixed displaying editing marks when toggling a mark in "pause" mode.
- If there is no free DVB device to record, the log message will now be given
only once.
- Made I/O more robust by handling EINTR (thanks to Werner Fink).
|
|
- Added Norwegian language texts (thanks to Jørgen Tvedt).
- Increased the usleep value in cDvbOsd::Cmd() to 5000 in order to work on
systems with the KURT/utime-patch (thanks to Guido Fiala).
- Changed the check whether the driver is loaded in runvdr to check for the
'dvb' module (the last one loaded).
- Fixed repeat function with LIRC (thanks to Stefan Huelswitt).
- Increased the upper limit for the symbol rate to 30000 (thanks to Ulrich
Röder).
- Made the position of the channel display configurable (thanks to Stefan
Huelswitt).
- Made the width and height of the OSD configurable (thanks to Stefan Huelswitt).
- DiSEqC support can now be generally enabled/disabled in the Setup menu. This
may be necessary if your multiswitch gets irritated by the default DiSEqC
codes '0' (thanks to Markus Lang).
- Fixed replaying in case there is no index file.
- Fixed jumping to an editing mark when replay has been paused.
- Avoiding unnecessary code execution in the replay progress display (thanks
to Guido Fiala).
- When entering time values the digits that still have to be entered are now
shown as '-' (as in "1-:--").
- When setting an editing mark while the progress display is not active, the
display will now be turned on for a short while to indicate the successful
setting of the mark.
- Updated 'channels.conf' for Premiere World (thanks to Helmut Schächner).
Check your timers if you use this channels.conf file, since the sequence of
several PW channels has been changed.
- Changed the color of "Info" messages to "black on green" and that of the
confirmation messages (like "Delete...") to "black on yellow".
- Fixed display with DEBUG_OSD (it still crashes sometimes, esp. when replaying,
but I can't seem to find what causes this... any ideas anybody?).
- Avoiding audio/video distortions in 'Transfer Mode' by no longer actually
tuning the primary interface (which can't receive this channel, anyway).
Apparently the driver gets irritated when the channel is switched and a
replay session is started immediately after that.
- Increased timeout until reporting "video data stream broken" when recording.
- Explicitly switching back to the previously active channel after ending a
replay session (to have it shown correctly in case it was in 'Transfer Mode').
|
|
- Fixed SVDRP commands LSTC and LSTT to make them return an error message if
no channels or timers are defined.
- Enhanced 'channels.conf.cable' (thanks to Hans-Peter Raschke).
- Fixed switching to another channel via the EPG while a recording is being
replayed.
- Fixed a memory leak in the EIT processor that happened when the system time
was set.
- Removed some redundant code from the cListBase destructor.
- Fixed internationalization of some Main menu texts.
- Updated 'channels.conf' after the recent changes of Premiere World (thanks
to Axel Gruber).
- Redesigned the ring buffer to make it work with two separate threads for
input and output (also prepared for using a remultiplexer).
- Fixed setting system time from transponders.
- Fixed a segfault in the Schedule menu in case there is no EPG information.
- The 'runvdr' script now kills any leftover vdr threads before restarting it.
- Fixed a problem with Daylight Saving Time when displaying the times of
recordings.
- Added Dutch language texts (thanks to Arnold Niessen).
- The new command line option -t can be used to set the controlling terminal
(thanks to Jürgen Sauer). This is especially useful when starting VDR through
an entry in /etc/inittab (see INSTALL).
- Since the CAM module only works if it is installed in the "highest" DVB card,
recordings now search for a free DVB card from lowest to highest index (as
opposed to the previous "highest to lowest" search) in order to not use the
CAM card for FTA recordings unless necessary. This is only important for
systems with three or more DVB cards.
- Added the "statdvb2vdr" tool from Hans-Peter Raschke.
- Fixed a segfault that sometimes happened when killing VDR.
- VDR now returns an exit status of '2' in case of an error at startup, instead
of terminating with 'abort()' (which caused a core dump).
- SVDRP now also works with clients that don't do line buffering (like the
Windows 'telnet').
- Empty lines in config files no longer cause error messages.
- New SVDRP command LSTE to list the EPG data.
- The SVDRP HELP command now prints the topics in several columns.
|
|
- Fixed 'Transfer Mode' in cases where a non-primary interface was switched to
a channel that only the primary interface can receive (which could happen in
the EPG scanner).
- The EPG scanner now starts with the first channel (it used to start with the
second channel).
- Reacitvated setting the PNR.
- Adapted the frame scanning to the new muxing of the driver.
- The new compile time option REMOTE=NONE can be used to compile VDR without
any remote control support (for applications where it shall be controlled
exclusively via SVDRP).
- The new command line option -D can be used to define which DVB interfaces
a certain instance of VDR shall use.
- The "Left" and "Right" keys are now used to page up and down in lists (thanks
to Martin Hammerschmid). Since the "Timers" menu already uses these keys to
(de)activate timers, this functionality is not available there.
- The "Main" and "Commands" menu now support "hotkeys", which means that if the
first non-blank character of a menu item is a digit in the range 1..9, that
item can be selected by pressing the respective numeric key on the remote
control.
- The channel data in 'channels.conf' now contains the teletext PID (thanks to
Dave Chapman). Existing files will be read normally (and the teletext PID set
to 0), but once they are written back (due to some channel editing) the file
will have the new format.
- The EPG scanner now scans each transponder only once per cycle.
- Deleted recordings are now automatically removed from disk after a while (not
only when disk space is being needed for a new recording).
- Fixed repeat function in LIRC remote control.
- Changed the MAXDVBAPI macro in dvbapi.c to 4 in order to directly support the
maximum possible number of DVB cards.
- The 'Ca' parameter in the default 'channels.conf' has been changed from '2'
to '3' because the VDR prototype now has 3 DVB cards (and currently the CAM
module only works if it is inserted into the last DVB card).
- The "Now", "Next" and "Schedule" menus now remember the current channel and
restore the list when switching between them.
- The "Green" button in the "Recordings" menu can now be used to rewind a
recording and play it from the very beginning.
- Fixed handling ':' in timer filenames and '\n' in timer summaries (see FORMATS).
- When removing recordings empty directories are now removed from the video
directory.
- Added the "schnitt" tools from Matthias Schniedermeyer.
- New SVDRP command MESG to display a short message on the OSD.
- The Perl script 'svdrpsend.pl' can be used to send SVDRP commands to VDR.
- SVDRP can now immediately reuse the same port if VDR is restarted.
- SVDRP now has a timeout after which the connection is automatically closed
(default is 300 seconds, can be changed in "Setup").
- The compile time switch VFAT can be used to make VDR avoid the ':' character
in file names (VFAT can't handle them). Do 'make VFAT=1' to enable this.
- Support for DVB-C (thanks to Hans-Peter Raschke and Peter Hofmann).
See the INSTALL file for more information about the use of VDR with cable.
- Fixed an occasional segfault in the EIT processor.
- A value of '0' for the EPGScanTimeout setup parameter now completely turns off
scanning for EPG data on both single and multiple card systems.
- New setup parameter "PrimaryLimit" that allows to prevent timers from using the
primary DVB interface in multi card systems. Default value is 0, which means
that every timer may use the primary interface.
- The 'active' field of a timer will now be explicitly set to '1' if the user
modifies an active timer (see FORMATS for details).
- The new command line option -w can be used to activate a watchdog that makes
VDR exit in case the main program loop does not respond for more than the
given number of seconds. This is mainly useful in combination with the new
'runvdr' script that restarts VDR in case is has exited.
|
|
- VDR now requires driver version 0.8.1 or higher.
- Recordings are now saved in PES mode. Note that you now need to install the
driver *WITHOUT* 'outstream=0'! This is the default when you 'make insmod' in
the DVB/driver directory.
Old recordings (in AV_PES mode) can still be replayed (as long as the driver
still supports replaying AV_PES files). The only limitation with this is that
in fast forward/back mode the picture may be slightly distorted and there may
be sound fragments.
- The EPG data is now dumped into the file /video/epg.data every ten minutes.
Use the Perl script 'epg2html.pl' to convert the raw EPG data into a simple
HTML programme listing.
- Fixed handling of channel switching with the "Blue" button in the "What's on
now/next?" menus.
- Fixed saving the MarginStop setup parameter.
- Fixed missing initialization in cConfig.
- Implemented "On Disk Editing".
- There is no more default 'timers.conf' file.
- Added Italian language texts (thanks to Alberto Carraro).
- Fixed starting a replay session when the program is currently in "transfer
mode".
- Fixed setting/modifying timers via SVDRP with empty summary fields.
- Fixed a problem with recordings that have a single quote character in their
name (this is now mapped to 0x01).
- Changed the value for Diseqc to '0' in the default 'channels.conf'.
- Fixed displaying channels and recording status in the RCU's LED display when
a recording is interrupted due to higher priority.
- Implemented safe writing of config files (first writes into a temporary file
and then renames it).
- In case the video data stream is broken the log message will come only every
5 seconds.
- The current channel is now saved in the 'setup.conf' file when VDR is cancelled,
and will be restored next time it is started (thanks to Deti Fliegl).
- The EIT scanning thread is now locked when switching channels to avoid problems.
- Encrypted channels can now be selected even without knowing the PNR (however, it
is still necessary for the EPG info).
|
|
- Date and time in the title of an event info page are now always right adjusted.
- The 'current channel' is now handled device specific (in case there is more
than one DVB card).
- The 'SetSystemTime' option in the "Setup" menu is now shown as "yes/no".
- Implemented "internationalization" (see 'i18n.c' for information on how to
add new languages). Thanks to Miha Setina for translating the OSD texts to
the Slovenian language.
- Fixed learning keys on the PC keyboard (display oscillated).
- Fixed a timing problem with OSD refresh and SVDRP.
- Avoiding multiple definitions of the same timer in the "Schedule" menu (this
could happen when pressing the "Red" button while editing the timer).
- There can now be a configuration file named 'commands.conf' that defines
commands that can be executed through the "Main" menu's "Commands" option
(see FORMATS for details on how to define these commands).
- Added a 'fixed' font for use with the output of system commands.
- The 'Priority' parameter of the timers is now also used to interrupt a low
priority timer recording if a higher priority timer wants to record.
- A timer recording on a DVB card with a CAM module will now be interrupted
by a timer that needs to use this specific DVB card to record an encrypted
channel, if the timer currently occupying this DVB card doesn't need the
CAM module (and thus can continue recording on a different DVB card).
- The "Yellow" button in the "What's on now/next?" menus now displays the
schedule of the current channel from that menu.
- All DVB cards in a multi-card system now write their EIT information into the
same data structure.
- If there is more than one DVB card in the system, the non-primary cards are
now used to periodically scan through the channels in order to keep the
EPG info up-to-date. Scanning kicks in after 60 seconds of user inactivity
(timeout in order to keep user interactions instantaneously) and each channel
that has the 'pnr' parameter defined in 'channels.conf' is switched to for
20 seconds. If there is only one DVB card in the system, that card will start
scanning after 5 hours (configurable through the "Setup" menu) of user inactivity
and will switch back to the channel it originally displayed at the first sign of
user activity. Any scanning will only occur if that particular card is not
currently recording or replaying.
- Now shifting the 'Subtitle' info into the 'ExtendedDescription' on stations
that don't send the EIT information correctly (like, e.g., 'VOX').
- Implemented a 10 seconds latency when removing files.
- Fixed unwanted reaction on the "Green" and "Yellow" button in the "Event" display.
- Implemented 'Transfer Mode' to display video data from the DVB card that actually
can receive a certain channel on the primary interface. This is currently in
an early state and may still cause some problems, but it appears to work nice
already.
|
|
- The EIT information is now gathered in a separate thread.
- The sytem time can now be synchronized to the time broadcast in the DVB data
stream. This can be enabled in the "Setup" menu by setting "SetSystemTime" to
1. Note that this works only if VDR is running under a user id that has
permisson to set the system time.
- The new item "Schedule" in the "Main" menu opens VDR's EPG (thanks to Robert
Schneider). See the MANUAL file for a detailed description.
- The new setup parameters MarginStart and MarginStop define how long (in
minutes) before the official start time of a broadcast VDR shall begin
recording, and how long after the official end time it shall stop recording.
These are used when a recording is programmed from the "Schedules" menu.
- The delay value in the dvb.c.071.diff patch to the driver has been increased
to '3', because on some systems the OSD was not displayed correctly. If you
are running an already patched version 0.71 driver and encounter problems
with the OSD, please make sure the parameter in the ddelay call is '3', not
'2'.
- Fixed initializing the RCU remote control code (didn't work after switching
on the system).
- Problematic characters in recording names (which can come from timers that
are programmed via the "Schedules" menu) are now replaced by suitable
substitutes.
|
|
- Modified LIRC interface to better handle repeat function.
- Faster OSD by first writing into a bitmap and then sending the entire bitmap
to the DVB driver at once (requires the patch 'dvb.c.071.diff' to be applied
against the version 0.71 DVB driver file 'dvb.c').
- When switching channels the channel is now immediately displayed, and the
current/next information is shown as soon as it becomes available.
- No longer displaying the year in the 'Recordings' menu to saves space for the
title.
- The 'Recordings' menu now displays a '*' to indicate new recordings.
- Added the description of the timers.conf file to the FORMATS file (thanks to
Bastian Guse).
- Displaying as much as possible of the current/next info (dropping characters
that would display only partially).
- In normal viewing mode the '0' key now toggles between the current and the
previous channel.
|
|
- NOTE: If you are using DVB driver version 0.7 you need to load the dvb.o
module with option outstream=0, so your insmod statement should read
'insmod dvb.o outstream=0'. This is currently necessary because 'vdr'
still works with AV_PES data.
- Video files now have the 'group read' bit set.
- Fixed handling errors in 'readstring()'.
- Handling SIGPIPE and re-establishing handler after intercepting a signal.
- The configuration files are now by default read from the video directory.
This can be changed by using the new '-c' option. Make sure you copy your
current '*.conf' files to your video directory ('/video' by default), or
use "-c ." to get the old behaviour of loading the configuration files
from the current directory.
- Waiting for input is now handled by a common function, which improves
response time on user actions. As a consequence the EIT data may sometimes
not be displayed, but this will change later when cEIT runs as a separate
thread.
- The new SVDRP command 'HITK' (thanks to Guido Fiala!) can be used to 'hit'
a remote control key. Establish an SVDRP connection and enter HITK without
a parameter for a list of all valid key names.
- The new SVDRP command 'GRAB' (thanks to Guido Fiala!) can be used to grab
the current frame and save it to a file.
- The new SVDRP commands 'OVL*' can be used to control video overlays (thanks
to Guido Fiala!). This is mainly for use in the 'kvdr' tool (see the 'kvdr'
page at http://www.s.netic.de/gfiala).
- If the name of the video directory used with the '-v' option had trailing
slashes, the recording file names have been damaged. Trailing slashes are
now silently removed.
- Fixed a buffer overflow in EIT parsing.
- Added a security warning regarding SVDRP to the INSTALL file.
- Fixed 'confirm' dialog.
- The daemon mode (option '-d') now no longer works with REMOTE=KBD (there
is no stdin in daemon mode, so KBD makes no sense - plus it sometimes
crashed).
|
|
- The Makefile now defines DVBDIR to easily point to where the DVB driver
source is located.
- When switching channels the current/next information is now displayed if
available (thanks to Robert Schneider). Since there is now more information
to read when switching channels, the timeout for displaying it has been
increased from 2 to 5 seconds (remember that this info can always be recalled
by pressing the "Ok" button).
For this feature to work it is necessary that the 'Pnr' parameter in the
channel setup ('channels.conf') is set to the proper value. This has been
done for some of the channels in the default 'channels.conf'. Some other
parameters in the default 'channels.conf' have also been updated, so please
make sure your timers still use the correct channels!
|
