summaryrefslogtreecommitdiff
path: root/eit.h
AgeCommit message (Collapse)Author
2008-04-13Version 1.7.0vdr-1.7.0Klaus Schmidinger
- Re-implemented handling of DVB-S2, which first appeared in version 1.5.14, but was revoked in version 1.5.15 in favor of making a stable version 1.6.0. VDR now requires the "multiproto" DVB driver, e.g. from http://jusst.de/hg/multiproto. Note that the channels.conf file now supports additional parameters, so you may want to make sure you have a backup of this file in case you need to go back to the previous version of VDR! - Fixed displaying transponder data when it is modified (thanks to Reinhard Nissl). - Fixed handling the counter in detection of pre 1.3.19 PS data (thanks to Reinhard Nissl). - Improved logging system time changes to avoid problems on slow systems under heavy load (suggested by Helmut Auer). - Now setting the thread name, so that it can be seen in 'top -H' (thanks to Rolf Ahrenberg). - Fixed initializing the timer's flags in the cTimer copy constructor (thanks to Andreas Mair). - Fixed setting the OSD level in the 'osddemo' example (thanks to Wolfgang Rohdewald). - Increased the time between checking the CAM status to 500ms to avoid problems with some CAMs (reported by Arthur Konovalov).
2004-01-04Version 1.3.0vdr-1.3.0Klaus Schmidinger
- Changed thread handling to make it work with NPTL ("Native Posix Thread Library"). Thanks to Jon Burgess, Andreas Schultz, Werner Fink and Stefan Huelswitt. - The cThread class now accepts a 'Description' parameter, which is used to log the beginning and end of the thread, together with its process and thread id. For descriptions that need additional parameters you can use the function cThread::SetDescription(), which accepts 'printf()' like arguments. Existing plugins that use threads should be changed to use this functionality instead of explicit 'dsyslog()' calls inside their Action() function in order to support logging the thread ids. - Added "Slovak Link" and "Czech Link" to 'ca.conf' (thanks to Emil Petersky). However, 'ca.conf' is now pretty much obsolete due to the automatic CA handling. - Mutexes are now created with PTHREAD_MUTEX_ERRORCHECK_NP, which makes the 'lockingTid' stuff obsolete (thanks to Stefan Huelswitt). - Changed font handling to allow language specific character sets. - Adopted the small font character set from the "Elchi" patch (originally provided by Alessio Sangalli). - Greek language texts now use iso8859-7 character set (thanks to Dimitrios Dimitrakos). - Rearranged section data handling, so that the actual data handling can be done separately, even from within plugins. - The EPG data structures have been moved from eit.[hc] to epg.[hc] and have been adapted to the general VDR coding style. Plugins that use these data structures may need to change some function names (which should be obvious). The name 'subtitle' has been changed to 'shortText' to avoid clashes with actual subtitles that are part of a movie. The name 'extendedDescription' has been shortened to 'description'. - Replaced 'libdtv' with 'libsi' (thanks to Marcel Wiesweg), which is thread safe and can be used by multiple section filters simultaneously. - Added 'cRwLock' to 'thread.[hc]'. Note that all plugin Makefiles need to define _GNU_SOURCE for this to work (see the example plugin Makefiles and 'newplugin'). - Fixed a problem with crc32 in SI handling on 64bit systems (thanks to Pedro Miguel Sequeira de Justo Teixeira for reporting this one). - Fixed an alignment problem in CAM access on 64bit systems (thanks to Pedro Miguel Sequeira de Justo Teixeira for reporting this one). - Added 'StreamType' setting to CAM communication, which is important for Aston/SECA CAMs (thanks to Antonino Sergi). - Now the CA descriptors are sent to the CAM in the 'program' or 'ES level' sections, depending on where they are found in the PMT (thanks to Hans-Peter Raschke for reporting this one). This should make SkyCrypt CAMs work. - Now using the 'version number' of EPG events to avoid unnecessary work. - Channel data is now automatically derived from the DVB data stream (inspired by the 'autopid' patch from Andreas Schultz). - The current channel is now automatically re-tuned if the PIDs or other settings change. If a recording is going on on a channel that has a change in its settings, the recording will be stopped and immediately restarted to use the new channel settings. - EPG events now use the complete channel ID with NID, TID and SID. - Channel names in 'channels.conf' can now have a short form, as provided by some tv stations (see man vdr(5)). Currently channels that provide short names in addition to long ones are listed in the OSD as "short,long name", as in "RTL,RTL Television". The short names will be used explicitly later. - The Ca parameter in 'channels.conf' has been extended and now contains all the CA system ids for the given channel. When switching to a channel VDR now tests for a device that provides one of these CA system ids. The devices automatically get their supported ids from the CI handler. - The values in 'ca.conf' are currently without any real meaning. Whether or not a channel with conditional access can be received is now determined automatically by evaluating its CA descriptors and comparing them to the CA system ids provided by the installed CAM. Only the special values 1-16 are used to assign a channel to a particular device. - Increased the maximum number of possible OSD colors to 256. - Limited the line length in the EPG bugfix report, which appears to fix a buffer overflow that caused a crash when cleaning up the EPG data (at 05:00 in the morning).
2003-05-18Version 1.1.32vdr-1.1.32Klaus Schmidinger
- Removed a faulty parameter initialization in menu.c (thanks to Lauri Tischler for reporting this one). - Re-implemented the WaitForPut/WaitForGet stuff in cRingBuffer, since some plugins actually need this. By default the buffer does not wait; if a plugin needs the waiting functionality it can call the new SetTimeouts() function. - Moved the call to cPlugin::Start() further up in vdr.c, to make sure it gets called before trying to learn the keys (problem reported by Oliver Endriss). - No longer starting the editing process if no marks have been set (thanks to Matthias Raus for reporting this one). - Added Catalanian language texts (thanks to Marc Rovira Vall and Ramon Roca). Plugin authors may want to add the new entries to their I18N texts and contact the translators to have their texts translated. Note that there are now 16 different OSD languages, so please make sure you have 16 versions for each of your texts. - Moved the detection of a broken video data stream from the cDevice into the cRecorder to avoid problems with cReceivers that want to receive from PIDs that are currently not transmitting (thanks to Marcel Wiesweg for reporting this one). - Fixed setting the locking pid after a timed wait (thanks to Andreas Schultz). - Avoiding spurious section filter settings after a channel switch. - Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt). - Fixed reading 'epg.data' for channels with non-zero RID (thanks to Oliver Endriss for reporting this one). - Fixed EPG bugfix statistics to avoid log entires for undefined channels (thanks to Lars Bläser for reporting this one). - No longer waiting inside cIndexFile::CatchUp() to avoid shortly blocking replay at the end of a recording.
2003-04-21Version 1.1.28vdr-1.1.28Klaus Schmidinger
- Using masks in EIT filtering to reduce the number of filters (thanks to Andreas Schultz). - Fixed handling Ca descriptors (thanks to Stefan Huelswitt). - Now only those Ca descriptors are sent to a CAM that are actually understood by that CAM. - Re-enabled CAM communication during replay and on non-Ca channels. This requires a DVB driver with firmware version 2613 or later. - It is now possible to do simultaneous recording and replay with a single DVB card, even with encrypted channels. This requires the use of the Link Layer firmware, version 2613 or higher; the -icam firmware is still limited to live encrypted channels only. Finally we have time shift for encrypted channels on single card systems! - Enhanced detection of pending user I/O from CAMs to avoid sluggish reaction to remote control keypresses. - Implemented "pause live video". You can now press "Menu/Yellow" or "Pause" on your remote control while watching live video to start an instant recording of the current programme and immediately start replaying that recording.
2003-04-13Version 1.1.27vdr-1.1.27Klaus Schmidinger
- The CAM is now accessed only if the current channel actually has a non-zero Ca value, and CAM access is completely suppressed during replay, which avoids problems in case the CAM is attached to the primary DVB device. - The "Left" and "Right" buttons now set the cursor to the first or last list item even if the list consist only of a single page, like, for instance, the Main menu (thanks to Oliver Endriss). - Made the log message "OSD window width must be a multiple of 4..." a debug message instead of an error message, so it can be avoided by using a log level less than 3. - Updated Greek language texts (thanks to Dimitrios Dimitrakos). - Fixed faulty behaviour of the "Mute" key in case the channel display is visible (thanks to Florian Bartels for reporting this one and Sascha Volkenandt for helping to fix it). - Modified LOF handling to allow for C-band reception (thanks to Malcolm Caldwell). - Added some missing cAudio handling calls (thanks to Werner Fink). - Replaced the 'for' loops in StripAudioPackets() with memset() calls (thanks to Werner Fink). - Further increased the timeout until an index file is considerd no longer to be written. - Fixed a crash in case the index file can't be accessed any more during replay (thanks to Stefan Huelswitt for reporting this one). - Fixed displaying messages in the status line in case they exceed the OSD width (thanks to Gerhard Steiner for reporting this one). - Avoiding high CPU load in case the connection to LIRC gets lost (thanks to Ludwig Nussel). - Fixed handling repeat function with LIRC (thanks to Ludwig Nussel). - Fixed handling min/max borders when entering integer values (thanks to Andy Grobb for reporting this one). - Implemented a "resume ID" which allows several users to each have their own resume.vdr files (thanks to Martin Hammerschmid). This parameter can be set in the "Setup/Replay" menu (see MANUAL for details). - Now using 'libdtv' version 0.0.5 (thanks to Rolf Hakenes for the new version and Stefan Huelswitt for adapting VDR to it). - If no device with an MPEG decoder can be found at startup, the first device is now used as primary device (just to have some device). - Adjusted some Premiere channels in 'channels.conf' (thanks to Thomas Koch). - Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt). - The 'epg.data' file is now read after all plugins have been started (thanks to Sascha Volkenandt). - The LIRC remote control no longer tries to learn keys if it can't connect to the LIRC daemon (thanks to Ludwig Nussel for reporting this one). The same applies to the RCU remote control in case of errors during startup. - Fixed handling of Ca parameters with values <= MAXDEVICES, which don't indicate an actual encrypted channel (thanks to Stefan Huelswitt for reporting this one).
2003-02-02Version 1.1.23vdr-1.1.23Klaus Schmidinger
- Fixed a new/delete malloc/free mismatch in ringbuffer.c (thanks to Stefan Huelswitt for reporting this one). - Improved CAM handling.
2003-01-10Version 1.1.21vdr-1.1.21Klaus Schmidinger
- Fixed the 'channels.conf' entries for "Studio Universal" and "Disney Channel". - Fixed handling channels in the "Channels" menu in case there are ':@nnn' group separators without names (thanks to Guy Roussin for reporting this one). - The SVDRP command CHAN now also accepts channel IDs. - Increased the timeout until an index file is considerd no longer to be written (sometimes in time shift with heavy system load the index file was closed too early by the replay thread). - Implemented "Link Layer" based CAM support, which hopefully will solve the problems with CAMs we had in the past. To use this you need the driver version 2002-01-08 or higher (with the new firmware supporting the "Link Layer" protocol). - Added an EPG bugfix that moves the Subtitle data to the Extended Description in case the latter is empty and the Subtitle exceeds some useful length. - Since several channels put very long strings into the Subtitle part of their EPG data, that string is now limited in length when used in a recording's file name.
2002-11-24Version 1.1.17vdr-1.1.17Klaus Schmidinger
- Added new entries to 'ca.conf'. - Fixed closing unused PID handles (thanks to Stefan Schluenss for reporting this one). - Added more examples to 'diseqc.conf' (thanks to Oliver Endriss). - Fixed disabling multiple recordings on a single DVB card (comment out the definition of the macros DO_REC_AND_PLAY_ON_PRIMARY_DEVICE and DO_MULTIPLE_RECORDINGS in dvbdevice.c). - Plugins can now have their very own OSD setup in the object they return from a call to cPlugin::MainMenuAction(). In order to implement this, the return type of cPlugin::MainMenuAction() had to be changed from (cOsdMenu *) to (cOsdObject *). So in case you are compiling an existing plugin with this version of VDR and you get an error message, simply change cOsdMenu to cOsdObject in the plugin's source for the MainMenuAction() function. Plugin authors who have so far (ab)used the cControl mechanism to implement their own raw OSD should take a look at the new demo plugin 'osddemo'. It implements a very primitive game that shows how a plugin can have its own raw OSD. Especially look into cLineGame and see how it implements the Show() function. See also the chapter on "User interaction" in PLUGINS.html. - Added three new fields to the lines in 'channels.conf': NID, TID and RID. NID and TID are the Network and Transport Stream IDs, respectively. RID is an additional ID that can be used to tell apart channels that would otherwise be indistinguishable. This is typically the case with radio channels, which may have the same NID, TID and SID, but different "radio IDs". This new field is therefore called RID ("radio ID"). Currently NID and TID are not yet used by VDR and should always be 0. The RID is actually used when building the "unique channel ID", so if you have channels in your 'channels.conf' file that cause error messages when loading, you can set the RIDs of these channels to different values. When reading an old 'channels.conf' these new fields will be automatically initialized to 0 and once the file is written back to disk they will be appended to the channel definitions. Thanks to Régis Bossut for pointing out that with some providers the channels can only be distinguished through the RID. - The "unique channel ID" now contains an optional 5th part (the RID). See man vdr(5). - Updated 'channels.conf.cable' and made some channels unique using the new RID (thanks to Andreas Kool for pointing out the problems). - Made some channels unique in 'channels.conf.terr' using the new RID. - Extended the '-l' option to allow logging to LOG_LOCALn (n=0..7) by writing, for instance, '-l 3.7' (suggested by Jürgen Schmidt). - Now deleting stale lock files if they have a time stamp that is outside the window 'now +/- LOCKFILESTALETIME'. This improves things in cases where the system time makes far jumps, so that a lock file might end up with a time stamp that lies in the distant future (thanks to Oliver Endriss).
2002-11-10Version 1.1.16vdr-1.1.16Klaus Schmidinger
- Fixed saving the polarization parameter of channels that have a number in the 'source' parameter (thanks to Peter Seyringer for reporting this one). - Updated 'channels.conf.terr' (thanks to Andy Carter). - Updated 'channels.conf.cable' (thanks to Achim Lange). - First step towards a "unique channel ID". The channel ID is a human readable string, made up from several parameters of the channel's definition in the file 'channels.conf' (see man vdr(5) for details). In order for the "unique channel ID" to work, all channel definitions now must be unique with respect to the combination of their Source, Frequency and SID parameters. You may have to fix your 'channels.conf' manually if there are error messages in the log file when loading it. BE SURE TO MAKE A BACKUP COPY OF YOUR 'channels.conf' AND 'timers.conf' FILE BEFORE SWITCHING TO THIS VERSION, AND CHECK VERY CAREFULLY WHETHER YOUR TIMERS ARE STILL SET TO THE RIGHT CHANNELS! When reading an existing 'timers.conf', the channels will be identified as before by their numbers. As soon as this file is written back, the channel numbers will be replaced by the channel IDs. After that it is possible to manually edit the 'channels.conf' file and rearrange the channels without breaking the timers. Note that you can still define new timers manually by using the channel number. VDR will correctly identify the 'channel' parameter in a timer definition and use it as a channel number or a channel ID, respectively. Also, the SVDRP commands that return timer definitions will list them with channel numbers in order to stay compatible with existing applications. The channel ID is also used in the 'epg.data' file to allow EPG information from different sources to be stored, which would previously have been mixed up in case they were using the same 'service ID'. Note that the contents of an existing 'epg.data' file from a previous version will be silently ignored, since it doesn't contain the new channel IDs. When inserting EPG data into VDR via SVDRP you now also need to use the channel IDs. Currently the EPG data received from the DVB data stream only uses the 'Source' and 'Service ID' part of the channel ID. This makes it work for channels with the same service IDs on different sources (like satellites, cable or terrestrial). However, it doesn't work yet if the service IDs are not unique within a specific source. This will be fixed later. - Added missing SID parameters to 'channels.conf'. Some channels have been removed since they are apparently no longer broadcasted. - Removed dropping EPG events from "other" streams that have a duration of 86400 seconds or more (was introduced in version 1.1.10). This has become obsolete by the modification in version 1.1.13, which fixed fetching the current/next information to handle cases where the duration of an event is set wrongly and would last beyond the start time of the next event. Besides, the change in 1.1.10 broke handling EPG data for NVOD channels. - Fixed a compiler warning regarding cMenuChannels::Del() and MenuTimers::Del() hiding the base class virtual functions.
2002-11-03Version 1.1.15vdr-1.1.15Klaus Schmidinger
- Completely switched to the new CVS HEAD version of the linux-dvb driver. The NEWSTRUCT compile time switch is now obsolete. The required driver is now the CVS HEAD version dated 2002-11-01 or later. - Adjusted the INSTALL file to the 1.1.x version. - Only accepting key presses from the current remote control when learning (thanks to Oliver Endriss). - Fixed the EPG scanner, which broke 'Transfer Mode' as soon as it kicked in (thanks to Oliver Endriss for reporting this one). - Fixed handling audio tracks in cDvbDevice. - Updated channels.conf.terr (thanks to Uwe Scheffler). - Fixed displaying the group separators in the channel display (thanks to Martin Hammerschmid for pointing out this one). - The Makefile now includes the file Make.config (if present in the VDR source directory), which allows the user to overwrite several settings with individual values (suggested by Andreas Schultz). The VDR distribution archive does not contain this file in order to not overwrite a user defined file. There is a Make.config.template which contains the default values of the macros the user can overwrite. - Since there have been changes to the 'newplugin' script authors of plugins may want to newly create their plugins' Makefiles with the new version of this script, and adapt them to their individual needs (make sure you don't overwrite your existing plugin directory - make a backup copy first!). - Fixed reading EPG data via the SVDRP command PUTE (it changed the current service ID). - Fixed closing all dup'ed file descriptors in cPipe. - Implemented a plugin interface for additional audio processing (see PLUGINS.html under "Dolby Digital"). The functionality of the '-a' command line option has been reactivated. Since the author doesn't have any Dolby Digital equipment this may or may not work as expected. There may still be some places where a call to cAudios::Clear() or cAudios::Mute() is necessary. Those with Dolby Digital equipment should please take a look at this and maybe send patches. Replaying Dolby Digital in ways other than through VDR's '-a' option will have to be implemented as plugins. Those who have written patches for VDR version 1.0.x should convert their work into the proper plugins for version 1.1.x. Note to authors of cPlayer derived plugins: please read the modified comments in device.h regarding the member functions cDevice::Clear(), cDevice::Mute() and cDevice::PlayAudio(). Derived classes must call these base class member functions to make sure all registered cAudio objects are properly handled. Also note that the return type of cDevice::PlayAudio() has been changed to 'void', since this function always has to accept the entire data block immediately and there is nothing that could be reasonably done in case an error occurs in one of the cAudio objects. - Now checking the driver's DVB_API_VERSION in dvbdevice.h. Since VDR now requires a driver dated 2002-11-01 or later the MIN_DVB_DRIVER_VERSION_FOR_TIMESHIFT and DVB_DRIVER_VERSION stuff has been replaced with DO_REC_AND_PLAY_ON_PRIMARY_DEVICE, which can be used to disable simultaneous recording and replaying on the primary DVB device in case there are problems with this.
2002-10-13Version 1.1.13vdr-1.1.13Klaus Schmidinger
- Added cDevice::DeviceNumber() to get the number of a device, not counting any gaps that might be in the index count. - Fixed fetching the current/next information to handle cases where the duration of an event is set wrongly and would last beyond the start time of the next event. - Adapted type names to the new HEAD version of the driver (which the previous NEWSTRUCT branch has been merged into). Note that to use this driver version you still need to add NEWSTRUCT=1 to the make call when building VDR. You need a HEAD version of the LinuxDVB driver dated 2002-10-11 or later to compile VDR with NEWSTRUCT=1. - Fixed radio channels in channels.conf.cable (thanks to Robert Schiele and Uwe Scheffler). - Fixed switching the video format in the Setup/DVB menu (thanks to Uwe Scheffler for reporting this one). - Reactivated full handling of second audio PID (even in 'Transfer Mode'). - Fixed a crash when closing down with remote control plugins (thanks to Oliver Endriss helping to debug this one). - Commands in the file 'commands.conf' can now have a '?' at the end of their title, which will result in a confirmation prompt before executing the command. - Changed a few leftover 'new char[...]' to MALLOC(char, ...). - If a command executed from the "Commands" menu doesn't return any output, the OSD will now be closed automatically. - The SVDRP command PUTE now triggers an immediate write of the 'epg.data' file (suggested by Gerhard Steiner). - The new configuration file 'reccmds.conf' can be used to define commands that shall be executed from the "Recordings" menu; see MANUAL and 'man vdr(5)' for details (suggested by Gerhard Steiner).
2002-08-25Version 1.1.8vdr-1.1.8Klaus Schmidinger
- Fixed replaying the last few seconds of a recording. - Added some missing #includes to files in libdtv for gcc 3.2 (thanks to Jürgen Zimmermann). - Added cDevice::NewOsd() to allow a derived cDevice class to implement its own OSD capabilities (thanks to Andreas Schultz). - Added cPalette::AllColors() for plugins that need to get the color entries of a cPalette (see osdbase.h). - The new SVDRP command CLRE can be used to clear the entire EPG data (suggested by Matthias Schniedermeyer). - Fixed handling one-shot timers that were already recording and had their start time changed into the future (thanks to Matthias Schniedermeyer for reporting this one).
2002-08-04Version 1.1.6vdr-1.1.6Klaus Schmidinger
- Re-visited the race condition fix in the cDvbPlayer (thanks again to Andreas Schultz). - Changed the VFAT handling to allow users who normally use it but have forgotten to set it when compiling a new version of VDR to at least see their recordings made with VFAT enabled (thanks to Christian Rienecker). - Added some missing teletext PIDs (thanks to Joerg Riechardt). - Fixed PID handling for cReceiver. - Added a missing #include to ringbuffer.c (thanks to Martin Hammerschmid). - Now using CC, CFLAGS, CXX and CXXFLAGS in Makefile. - Changed the cDevice class to allow plugins to implement their own devices (see PLUGINS.html for details).
2002-03-17Version 1.0.0pre4vdr-1.0.0pre4Klaus Schmidinger
- Added 'Ca' code 201 for 'Cryptoworks, GOD-DIGITAL' to 'ca.conf' (thanks to Bernd Schweikert). - Fixed avoiding the primary DVB interface in case Setup.PrimaryLimit is 0. - Fixed handling CICAM settings if the first one of a DVB card was FTA. - Fixed reacting on changes in CICAM settings (needed to restart VDR before). - The "Blue" button in the "Main" menu now works as "Stop" button if a recording is currently being replayed. - New command line option '-m' to mute audio of the primary DVB device at startup (suggested by Mirko Günther). - The new SVDRP command VOLU can be used to control the audio volume (suggested by Mirko Günther). - Fixed resetting 'mute' state when setting the volume to a non-zero value. - Added log messages when deleting recordings in case the disk runs full while recording. - Fixed closing a pipe (used for replaying Dolby Digital audio), which sometimes left 'zombie' processes behind (thanks to Werner Fink for helping to debug this one). - Now starting the Dolby Digital output thread only if the recording actually contains Dolby Digital audio data (thanks to Werner Fink). - Implemented OSD for Volume and Mute (works only if there is no other OSD activity, but this should be no problem for normal use). - Changed the MANUAL description of the "Conditional Access" setup parameters to reflect the actual "CICAM DVBn m" notation in the "Setup" menu. - The new Setup parameter "Use time from transponder" can be used to define which transponder shall be used to set the system time (see MANUAL for details). If you have been using the SetSystemTime option previously, you now MUST select a channel that you trust to have a reliable time base. - Grouped the Setup parameters into several sub-menus, so that each group of parameters fits on a single screen - unless the height of the OSD has been set to a small value (based on code from Markus Lang). - Changed the title of the "Main" menu to "VDR". - Fixed displaying a system message while the replay mode is being shown. - Physically removing a deleted recording if one with the same name shall be deleted again. - The "Left" and "Right" keys are now used to page up and down in text displays (like the EPG descriptions or the results of commands executed from the "Commands" menu). - Fixed high CPU usage in transfer mode. - Replaced 'killproc' with 'killall' in 'runvdr', since apparently 'killproc' is not available by default on some Linux distributions, whereas 'killall' is. Please check if your system provides 'killall' - if it doesn't, please change this back in 'runvdr' and report this (thanks to Achim Lange). - The "Commands" menu now automatically assigns number keys as hotkeys to the commands. If you have preceeded your commands with digits you may want to remove these from your 'commands.conf' file. - The new Setup item "Restart" can be used to force a complete restart of VDR, including reloading the driver. Note that this can only work if VDR and the driver are wrapped into a mechanism that actually performs this action if VDR exits. The 'runvdr' script can be used for this purpose. - Refined texts of the "Setup" menu.
2002-02-24Version 1.0.0pre1vdr-1.0.0pre1Klaus Schmidinger
- Added scanning for EPG data for another 4 days on channels that support this (thanks to Oleg Assovski). - Removed '#define VFAT 1' from recording.c (was a leftover from testing). - Fixed the "Low disk space!" message (thanks to Sergei Haller). - Added the TPID to Hessen-3 in 'channels.conf' (thanks to Sergei Haller). - Fixed a crash when replaying with DEBUG_OSD=1 (thanks to Stefan Huelswitt). - Implemented the "First day" parameter for repeating timers. See FORMATS for information about the enhanced 'timers.conf' file format, and MANUAL for a description of the new item in the "Edit Timer" menu and the enhanced functionality of the "Blue" button in the "Timers" menu. - When deleting a recording that is currently still being recorded, the related timer will now automatically be terminated. If this is a repeating timer, it will receive a "First day" setting that skips the timer for this day. - Fixed closing all unused file descriptors when opening a pipe (thanks to Werner Fink). - Instant recordings now take the EPG data from the point in time at 5 minutes from the start time of the recording. In order for this to work the 'active' parameter of a timer now uses the second bit to indicate that this is an "instant" recording (see FORMATS for details). - Fixed the SVDRP GRAB command in case the video device can't be opened (thanks to Adrian Stabiszewski). - At startup the data written into 'epg.data' is now read into the EPG data structures. In order for this to work, the 'E' record has been extended to (optionally) contain the 'table ID' (see FORMATS for details). - The new SVDRP command PUTE can be used to put EPG data into the EPG list. See FORMATS for details about the required data format. - Taking the German umlauts 'as is' when compiled with VFAT. - The new Setup parameter RecordDolbyDigital can be used to generally turn off recording the Dolby Digital audio channels in case you want to save disk space or don't have the equipment to replay Dolby Digital audio. - Reading the 'setup.conf' file no longer terminates in case of an error, but rather attempts to read the rest of the file. - Removed DVD support from the core VDR source, since the current version from Andreas Schultz is already much further developed (DVD menu navigation) and the concept of "additional players" in VDR is going to change in version 1.1.0, where a new "plugin" interface shall allow the easy implementation of new players without having to patch the core VDR source. Until then, Andreas has agreed to provide his DVD support as a completely external patch. - The contents of the distribution archive now contains the directory name with the current version number, as in 'vdr-1.0.0pre1/...' in order to avoid inadvertently overwriting an existing VDR directory with a new version. - Added a missing error message in SVDRP command LSTC in case the given channel can't be found.
2002-01-27Version 0.99pre2vdr-0.99pre2Klaus Schmidinger
- Fixed setting the OSD size in the 'Confirm' interface call (thanks to Deti Fliegl). - Removed the 'read incomplete section...' error message in the EIT processor. - Fixed channel data for "DW TV" (thanks to Axel Gruber). - Added DPID to "PREMIERE MOVIE 1" in channels.conf.cable (thanks to Stephan Schreiber). - Prepared the OSD functions for multiple overlapping windows. - Removed the check to see whether the system time is running linearly. - Improved performance of SVDRP command entry. - Removed EPGBugfixLevel '3' - after more than a year Pro-7 finally managed to broadcast the correct timestamps for EPG events between 0:00 and 6:00! - Fixed failing watchdog timer if program hangs in OSD activities (thanks to Carsten Koch). - No longer requiring 'libncurses' if compiling without DEBUG_OSD=1 and REMOTE=KBD (thanks to Lauri Pesonen). - The "Recordings" menu now displays a hierarchical structure if there are subdirectories for the recordings. This can be controlled through the "RecordingDirs" parameter in the "Setup" menu. See "MANUAL/Replaying a Recording" for details. - Improved speed of setting the Help button texts. - Fixed handling file names that contain single quotes (') or dollar signs ($) in the call to the shutdown command (option '-s') and the recording command (option '-r'). - Improved error handling in the editing process; the resulting file will be deleted if an error occured. - A message is now prompted at the end of the editing process, indicating whether the process succeeded or failed. - Fixed setting the LastActivity timestamp after a shutdown prompt (thanks to Sergei Haller). - A message is now prompted if free disk space becomes low during recording. - The editing process now calls AssertFreeDiskSpace() to remove deleted recordings if the disk becomes full. - The "Main" menu now displays in its title the used disk space (in percent) and the estimated free disk space (in hh:mm), assuming a data rate of 30 MB per minute. - Activating the "Recordings" menu now displays "scanning recordings..." to give the user some feedback in case this takes longer. - Status messages are now displayed centered. - Removed the 'Tools' subdirectory from the VDR archive. All contributed tools can now be found at ftp://ftp.cadsoft.de/pub/people/kls/vdr/Tools.
2001-11-04Version 0.98vdr-0.98Klaus Schmidinger
- Completed storing the current audio volume in the setup.conf file (thanks to Andy Grobb). - Fixed closing the progress display with the "Back" key when in trick mode and Setup.ShowReplayMode is enabled (thanks to Stefan Huelswitt). - New SVDRP commands LSTR and DELR to list and delete recordings (thanks to Thomas Heiligenmann). - Fixed a crash when pressing the '2' button while replaying a DVD. - Updated 'channels.conf' for the "Bundesliga" channels of Premiere World (thanks to Mel Schächner). - Changed the tuning code to use FrontendInfo to detect the type of DVB card. - Removed the recursion stuff from cThread (cMutex already does this). - Fixed handling the repeat function in the channel display. - Avoiding multiple EPG entries for the same event (thanks to Rolf Hakenes for some valuable information on how to do this). - A recording on the primary interface can now be stopped to make it continue on an other free DVB card (if one is free at the moment). See MANUAL for details. - Added some missing teletext PIDs (thanks to Norbert Schmidt). - Added PTS to the converted PCM audio when replaying a DVD (thanks to Andreas Schultz). Now the audio and video of a DVD replayed over the DVB card's A/V out should always be in sync. - Fixed handling the "Power" key in case Setup.MinUserInactivity is set to 0 to disable automatic shutdown. - Added a fifth parameter to the 'shutdown' call that indicates the reason for this shutdown request (see INSTALL). - Fixed releasing 'index' memory after recording or playback. - Fixed ejecting a DVD while it is being replayed. - Removed all video overlay stuff from cDvbApi and SVDRP. Guido Fiala's new 'kvdr' version 0.4 now does these things itself. As a consequence of this you will now need to use kvdr 0.4 or later. - The device /dev/video is now opened only if necessary (to GRAB an image), allowing other programs (like 'kvdr', for instance) to use that device.
2001-09-23Version 0.96vdr-0.96Klaus Schmidinger
- Made VDR compile with libdvdread-0.9.1 (thanks to Andreas Schultz). Note that you now _need_ version 0.9.1 of libdvdread to compile VDR with DVD support! - Several fixes to the replay mode display (thanks to Stefan Huelswitt): no more replay mode display when pressing the "Green" or "Yellow" button (Skip +/-60s); fixed timeout when pressing '0' to set an editing mark while the progress display is not shown; mode display is shown after progress display is closed; pressing "Ok" while the mode display is on brings up the progress display; no more unnecessary display of "normal play mode". - Supplying the new frontend parameter 'Inversion' (currently it is always set to INVERSION_AUTO, which should work with all channels on Astra). - Removing unnecessary double quotes from EPG Subtitle in EPGBugfixLevel >=1. - EPG info is now updated if the contents changes but the ID remains the same. - Fixed handling SVDRP commands whith more than one blank between the command word and the options. - The current volume setting is now saved to setup.conf and restored at the next program start. - New command line option '-r' to define a command that gets called before and after each recording (see INSTALL for details). - Implemented a check to see whether the system time is running linearly. - Writing the current time (as seen by VDR) into the log file when starting a timer recording (this may help debugging cases where timers don't start at the expected time). - Made the volume, mute and power keys work when a menu is active, too (thanks to Matthias Weingart).
2001-08-18Version 0.92vdr-0.92Klaus Schmidinger
- The "channel not sync'ed" log message now also lists the card number. - Now using the EIT services from 'libdtv' (thanks to Rolf Hakenes), which provides EPG information for NVOD ("Near Video On Demand") channels. - Doing some bug fixing on the EPG data (some tv stations apparently have their own idea on how to fill in the data...). The level up to which EPG bugs are fixed can be controlled with the EPGBugfixLevel parameter in the "Setup" menu (see MANUAL for details, and cEventInfo::FixEpgBugs() in eit.c for the actual implementation). - Fixed broken recordings after a driver buffer overflow. - Fixed the chirping sound after Pause/Play of a DVD (thanks to Andreas Schultz).
2001-08-12Version 0.91vdr-0.91Klaus Schmidinger
- Fixed displaying colored button texts that are too long. - Suppressing replay progress display when replaying a DVD. - Updated channels.conf.cable (thanks to Uwe Scheffler). - Updated French OSD texts (thanks to Jean-Claude Repetto). - Improved AC3 decoding when replaying DVDs (thanks to Matjaz Thaler). - Fixed handling DVB card indexes when using only one card in a multi-card system. - Changed the 'Eject DVD' button text to a simple 'Eject' (the German text was too long...). - Made the font file generation more stable (thanks to Artur Skawina). - Changed the default value for the "DiSEqC" setup parameter to "off". - The new command line option '-E' can be used to define where the EPG data shall be written to. This is especially useful if VDR runs in a system that turns off the video disk when it is not used, and therefore needs to write the EPG file to a ramdisk (or turn off writing it alltogether). See 'vdr --help' for details. - Making sure the disk is up and running before starting recording (this is important for systems that turn off the video disk when it is not used). - Added the "Jump" function in replay mode (thanks to Stefan Huelswitt). See the description of the "Red" key in MANUAL under "Replay Control" for details. - Fixed displaying editing marks when toggling a mark in "pause" mode. - If there is no free DVB device to record, the log message will now be given only once. - Made I/O more robust by handling EINTR (thanks to Werner Fink).
2001-07-29Version 0.85vdr-0.85Klaus Schmidinger
- Added Norwegian language texts (thanks to Jørgen Tvedt). - Increased the usleep value in cDvbOsd::Cmd() to 5000 in order to work on systems with the KURT/utime-patch (thanks to Guido Fiala). - Changed the check whether the driver is loaded in runvdr to check for the 'dvb' module (the last one loaded). - Fixed repeat function with LIRC (thanks to Stefan Huelswitt). - Increased the upper limit for the symbol rate to 30000 (thanks to Ulrich Röder). - Made the position of the channel display configurable (thanks to Stefan Huelswitt). - Made the width and height of the OSD configurable (thanks to Stefan Huelswitt). - DiSEqC support can now be generally enabled/disabled in the Setup menu. This may be necessary if your multiswitch gets irritated by the default DiSEqC codes '0' (thanks to Markus Lang). - Fixed replaying in case there is no index file. - Fixed jumping to an editing mark when replay has been paused. - Avoiding unnecessary code execution in the replay progress display (thanks to Guido Fiala). - When entering time values the digits that still have to be entered are now shown as '-' (as in "1-:--"). - When setting an editing mark while the progress display is not active, the display will now be turned on for a short while to indicate the successful setting of the mark. - Updated 'channels.conf' for Premiere World (thanks to Helmut Schächner). Check your timers if you use this channels.conf file, since the sequence of several PW channels has been changed. - Changed the color of "Info" messages to "black on green" and that of the confirmation messages (like "Delete...") to "black on yellow". - Fixed display with DEBUG_OSD (it still crashes sometimes, esp. when replaying, but I can't seem to find what causes this... any ideas anybody?). - Avoiding audio/video distortions in 'Transfer Mode' by no longer actually tuning the primary interface (which can't receive this channel, anyway). Apparently the driver gets irritated when the channel is switched and a replay session is started immediately after that. - Increased timeout until reporting "video data stream broken" when recording. - Explicitly switching back to the previously active channel after ending a replay session (to have it shown correctly in case it was in 'Transfer Mode').
2001-04-01Version 0.72vdr-0.72Klaus Schmidinger
- Fixed SVDRP commands LSTC and LSTT to make them return an error message if no channels or timers are defined. - Enhanced 'channels.conf.cable' (thanks to Hans-Peter Raschke). - Fixed switching to another channel via the EPG while a recording is being replayed. - Fixed a memory leak in the EIT processor that happened when the system time was set. - Removed some redundant code from the cListBase destructor. - Fixed internationalization of some Main menu texts. - Updated 'channels.conf' after the recent changes of Premiere World (thanks to Axel Gruber). - Redesigned the ring buffer to make it work with two separate threads for input and output (also prepared for using a remultiplexer). - Fixed setting system time from transponders. - Fixed a segfault in the Schedule menu in case there is no EPG information. - The 'runvdr' script now kills any leftover vdr threads before restarting it. - Fixed a problem with Daylight Saving Time when displaying the times of recordings. - Added Dutch language texts (thanks to Arnold Niessen). - The new command line option -t can be used to set the controlling terminal (thanks to Jürgen Sauer). This is especially useful when starting VDR through an entry in /etc/inittab (see INSTALL). - Since the CAM module only works if it is installed in the "highest" DVB card, recordings now search for a free DVB card from lowest to highest index (as opposed to the previous "highest to lowest" search) in order to not use the CAM card for FTA recordings unless necessary. This is only important for systems with three or more DVB cards. - Added the "statdvb2vdr" tool from Hans-Peter Raschke. - Fixed a segfault that sometimes happened when killing VDR. - VDR now returns an exit status of '2' in case of an error at startup, instead of terminating with 'abort()' (which caused a core dump). - SVDRP now also works with clients that don't do line buffering (like the Windows 'telnet'). - Empty lines in config files no longer cause error messages. - New SVDRP command LSTE to list the EPG data. - The SVDRP HELP command now prints the topics in several columns.
2001-01-18Version 0.70vdr-0.70Klaus Schmidinger
- VDR now requires driver version 0.8.1 or higher. - Recordings are now saved in PES mode. Note that you now need to install the driver *WITHOUT* 'outstream=0'! This is the default when you 'make insmod' in the DVB/driver directory. Old recordings (in AV_PES mode) can still be replayed (as long as the driver still supports replaying AV_PES files). The only limitation with this is that in fast forward/back mode the picture may be slightly distorted and there may be sound fragments. - The EPG data is now dumped into the file /video/epg.data every ten minutes. Use the Perl script 'epg2html.pl' to convert the raw EPG data into a simple HTML programme listing. - Fixed handling of channel switching with the "Blue" button in the "What's on now/next?" menus. - Fixed saving the MarginStop setup parameter. - Fixed missing initialization in cConfig. - Implemented "On Disk Editing". - There is no more default 'timers.conf' file. - Added Italian language texts (thanks to Alberto Carraro). - Fixed starting a replay session when the program is currently in "transfer mode". - Fixed setting/modifying timers via SVDRP with empty summary fields. - Fixed a problem with recordings that have a single quote character in their name (this is now mapped to 0x01). - Changed the value for Diseqc to '0' in the default 'channels.conf'. - Fixed displaying channels and recording status in the RCU's LED display when a recording is interrupted due to higher priority. - Implemented safe writing of config files (first writes into a temporary file and then renames it). - In case the video data stream is broken the log message will come only every 5 seconds. - The current channel is now saved in the 'setup.conf' file when VDR is cancelled, and will be restored next time it is started (thanks to Deti Fliegl). - The EIT scanning thread is now locked when switching channels to avoid problems. - Encrypted channels can now be selected even without knowing the PNR (however, it is still necessary for the EPG info).
2000-11-19Version 0.68vdr-0.68Klaus Schmidinger
- Date and time in the title of an event info page are now always right adjusted. - The 'current channel' is now handled device specific (in case there is more than one DVB card). - The 'SetSystemTime' option in the "Setup" menu is now shown as "yes/no". - Implemented "internationalization" (see 'i18n.c' for information on how to add new languages). Thanks to Miha Setina for translating the OSD texts to the Slovenian language. - Fixed learning keys on the PC keyboard (display oscillated). - Fixed a timing problem with OSD refresh and SVDRP. - Avoiding multiple definitions of the same timer in the "Schedule" menu (this could happen when pressing the "Red" button while editing the timer). - There can now be a configuration file named 'commands.conf' that defines commands that can be executed through the "Main" menu's "Commands" option (see FORMATS for details on how to define these commands). - Added a 'fixed' font for use with the output of system commands. - The 'Priority' parameter of the timers is now also used to interrupt a low priority timer recording if a higher priority timer wants to record. - A timer recording on a DVB card with a CAM module will now be interrupted by a timer that needs to use this specific DVB card to record an encrypted channel, if the timer currently occupying this DVB card doesn't need the CAM module (and thus can continue recording on a different DVB card). - The "Yellow" button in the "What's on now/next?" menus now displays the schedule of the current channel from that menu. - All DVB cards in a multi-card system now write their EIT information into the same data structure. - If there is more than one DVB card in the system, the non-primary cards are now used to periodically scan through the channels in order to keep the EPG info up-to-date. Scanning kicks in after 60 seconds of user inactivity (timeout in order to keep user interactions instantaneously) and each channel that has the 'pnr' parameter defined in 'channels.conf' is switched to for 20 seconds. If there is only one DVB card in the system, that card will start scanning after 5 hours (configurable through the "Setup" menu) of user inactivity and will switch back to the channel it originally displayed at the first sign of user activity. Any scanning will only occur if that particular card is not currently recording or replaying. - Now shifting the 'Subtitle' info into the 'ExtendedDescription' on stations that don't send the EIT information correctly (like, e.g., 'VOX'). - Implemented a 10 seconds latency when removing files. - Fixed unwanted reaction on the "Green" and "Yellow" button in the "Event" display. - Implemented 'Transfer Mode' to display video data from the DVB card that actually can receive a certain channel on the primary interface. This is currently in an early state and may still cause some problems, but it appears to work nice already.
2000-11-01Version 0.67vdr-0.67Klaus Schmidinger
- The EIT information is now gathered in a separate thread. - The sytem time can now be synchronized to the time broadcast in the DVB data stream. This can be enabled in the "Setup" menu by setting "SetSystemTime" to 1. Note that this works only if VDR is running under a user id that has permisson to set the system time. - The new item "Schedule" in the "Main" menu opens VDR's EPG (thanks to Robert Schneider). See the MANUAL file for a detailed description. - The new setup parameters MarginStart and MarginStop define how long (in minutes) before the official start time of a broadcast VDR shall begin recording, and how long after the official end time it shall stop recording. These are used when a recording is programmed from the "Schedules" menu. - The delay value in the dvb.c.071.diff patch to the driver has been increased to '3', because on some systems the OSD was not displayed correctly. If you are running an already patched version 0.71 driver and encounter problems with the OSD, please make sure the parameter in the ddelay call is '3', not '2'. - Fixed initializing the RCU remote control code (didn't work after switching on the system). - Problematic characters in recording names (which can come from timers that are programmed via the "Schedules" menu) are now replaced by suitable substitutes.
2000-09-03Version 0.62vdr-0.62Klaus Schmidinger
- The Makefile now defines DVBDIR to easily point to where the DVB driver source is located. - When switching channels the current/next information is now displayed if available (thanks to Robert Schneider). Since there is now more information to read when switching channels, the timeout for displaying it has been increased from 2 to 5 seconds (remember that this info can always be recalled by pressing the "Ok" button). For this feature to work it is necessary that the 'Pnr' parameter in the channel setup ('channels.conf') is set to the proper value. This has been done for some of the channels in the default 'channels.conf'. Some other parameters in the default 'channels.conf' have also been updated, so please make sure your timers still use the correct channels!