summaryrefslogtreecommitdiff
path: root/epg.h
AgeCommit message (Collapse)Author
2006-10-08Version 1.4.3-1vdr-1.4.3-1Klaus Schmidinger
- The function cThread::Cancel() now only sets 'running' to false and does not actually kill the thread if the special value -1 is given (suggested by Udo Richter). - Changed the I18nNormalizeLanguageCode() check to also allow blanks (and all other printable characters) in the language codes (thanks to Boguslaw Juza for reporting that there are stations that use blanks in these codes). Blanks are replaced with underlines, so that all parts of VDR that rely on language codes to be one word (without blanks) work as expected. - Now clearing an event's Title, ShortText and Description if there is no ShortEventDescriptor or ExtendedEventDescriptor, respectively (thanks to Boguslaw Juza for reporting that events without an ExtendedEventDescriptor may get duplicate information in their ShortText through the EPG bugfixes in case they are received again). - Fixed handling video directory updates in case an other process has touched the .update file after the last NeedsUpdate() check (thanks to Petri Hintukainen). - Fixed handling language codes and descriptions of recorded audio tracks on channels with multiple tracks where not all of them appear in the event data (reported by Boguslaw Juza).
2006-03-26Version 1.3.45vdr-1.3.45Klaus Schmidinger
- Fixed updating the "Info" button in the "Timers" menu. - Reduced the number of events to actually check when setting events to timers. - cMenuEditIntItem now checks the given value and forces it to be between the given min and max limits. - The status changes of EPG events are now logged for all channels that have timers. - Removed the log message "deleting plugin: ..." when shutting down VDR (thanks to Christoph Haubrich for reporting that this is irritating when calling "vdr --help"). - Fixed cReadLine::Read() for lines that end with the infamous "\r\n" (thanks to Rolf Ahrenberg). - Fixed cDvbDevice::SetAudioBypass() in case setTransferModeForDolbyDigital is false (thanks to Werner Fink). - Updated 'sources.conf' (thanks to Oleg Roitburd). - Fixed the shutdown timeout (thanks to Alexander Wenzel). - Only calling RemoveEmptyVideoDirectories() once in case a recording has been deleted (reported by Hardy Flor). - Fixed deleting recordings that have been removed externally when running out of disk space (reported by Jan Lenz). - Fixed handling repeating VPS timers (they stopped recording too early). - Timer log messages now show "VPS" if this is a VPS timer. - Fixed getting the present EPG event in case none is currently 'running' (it then returns the one that just ended). - Fixed calling a plugin's main menu function while a message is being displayed (reported by Helmut Auer). - Updated the Russian OSD texts (thanks to Oleg Roitburd). - Made cMenuRecordings::GetRecording() 'protected' (suggested by Marius Heidenstecker). - Speeded up cRemux::ScanVideoPacket() (thanks to Reinhard Nissl). - Enhanced logging EPG event data. - Fixed format string handling (thanks to Darren Salt). - The new function cDevice::ForceTransferMode() can be used to force the primary device into transfer mode (thanks to Reinhard Nissl). - The 'version' of EPG events is now ignored when reading EPG data from 'epg.data' or via SVDRP/PUTE to avoid problems with double EPG events. - The 'running status' of EPG events is now only set to SI::RunningStatusNotRunning for events before the present event. - Fixed some #include sequences. - Single shot VPS timers are now only considered 'expired' if their associated EPG event has been explicitly set to SI::RunningStatusNotRunning. - The check for timers to be deleted is now done only every 30 seconds.
2006-02-26Version 1.3.44vdr-1.3.44Klaus Schmidinger
- Fixed setting the audio language codes in 'Transfer-Mode' (reported by Rolf Ahrenberg). The actual problem was the call to the Transferring() function in cDevice::AttachPlayer() before assigning the player. - Fixed removing the '-' when entering a channel number where there is no other one that fits the input (thanks to Joachim Wilke). - Fixed the 'libsi' function CharArray::checkSize(), which made a previous workaround in libsi/descriptor.c obsolete (thanks to Marcel Wiesweg). - The "Ok" key in the "Jump" mode of the replay progress display now confirms the jump instead of closing the display (thanks to Christoph Haubrich). - The 'summary' field of a timer definition has been renamed to 'aux', and is now only used for external applications to store auxiliary information with a timer, which has no meaning whatsoever to VDR itself. The contents of the 'aux' field of a timer is copied into the recording's 'info.vdr' file, using the tag character '@'. - The description of a recording is now taken exclusively from its related EPG data. If an application wants to use a different description it needs to set it with SVDRP/PUTE and use table ID 0x00, so that it won't be overwritten (as a side effect, however, this also disables VPS for such an event). - There is no more "Summary" menu when pressing "Ok" in the "Timers" menu. The "Ok" key now always opens the "Edit timer" menu. - The upper 16 bit of a timer's "flags" are no longer treated specially when a timer is modified in the "Edit timer" menu. If an external application needs to know if a timer was modified, it has to keep a copy of the timer's data and compare that to the actual data. - The new function cRecordingInfo::ChannelID() can be used to retrieve the ID of the channel a recording was made from. - The 'info.vdr' file of a recording now also contains the 'E' and 'V' records of the EPG event used when creating it. - The option "Setup/OSD/Sort timers" has been removed. Timers are always sorted by their start time and priority. - The "Blue" key in the "Timers" menu now displays the EPG info of the event the selected timer will record (if available). The "On/Off" function has been shifted to the "Red" button. Editing a timer is done by pressing "Ok". - When determining which event a timer is going to record, all available events in the future are now taken into account (no more limit to 4 hours in the future). This has been done so that the event info is available in the "Timers" menu when pressing the "Blue" button. In order to avoid unnecessary work, each timer now has its own timestamp to control whether its schedule has changed since the last time its event has been set. - Fixed setting events to timers in case a non-VPS event has expired. - There is now a log message "timer ... set to event ..." when defining a timer from the EPG menu. - Lines tagged with '#' in the 'info.vdr' file of a recording are now silently ignored when reading that file (suggested by Peter Bieringer). Such lines can be used by external tools to store arbitrary information. - The 'event id' in EPG data has been extended to 32 bit, so that external tools can generate ids that don't collide with those from the DVB data stream (suggested by Matthias Schniedermeyer). - The DrawBitmap() function now has a new parameter 'Overlay' that allows a bitmap to be drawn with a transparent background (thanks to Alexander Hans). - Fixed cSchedule::GetFollowingEvent() in case there is currently no present event running (thanks to Pekka Mauno).
2006-02-19Version 1.3.43vdr-1.3.43Klaus Schmidinger
- Removed an unnecessary toFile->SetReadAhead() from cutter.c (thanks to Artur Skawina). - The "Back" key now restores the original string when pressed while editing a string item (suggested by Markus Hahn). - Now stopping scanning the video directory if there are too many levels of symbolic links, which might indicate a recursive link loop (based on a patch from Helmut Auer). - Improved OSD area handling in cDvbSpuDecoder (thanks to Marco Schlüßler). - Now logging the description (if present) in case a thread is canceled (suggested by Marco Schlüßler). - cMenuText now uses the given font (thanks to Rolf Ahrenberg). - The ST:TNG skin now uses the fixed font if requested when displaying texts. - Fixed some typos in the CONTRIBUTORS file (thanks to Frank Krömmelbein). - Changed offset and size handling in 'libsi' from 'unsigned' to 'signed', so that overflows can be better detected (thanks to Marcel Wiesweg). - Checking data size in CaDescriptor::Parse() and LinkageDescriptor::Parse() of 'libsi' to avoid crashes with invalid data (thanks to Marcel Wiesweg). - Made CharArray::DataOwnData::assign() in 'libsi' more robust against invalid data (suggested by Oliver Endriss). Also changed CharArray::DataOwnData::Delete() so that it sets 'size' and 'data' to 0. - Now resetting the channel number if the number entered through the numeric keys exceeds the maximum channel number (thanks to Rolf Ahrenberg). - The language code in the 'X' component records of EPG data can now consist of two codes, separated by '+'. - If a recording starts and there is no EPG data available for the recorded channel, the 'X' audio component records for the 'info.vdr' file are now generated from the channel's PID data. - Externally provided EPG data (with table ID 0x00) now gets its component descriptors set from the broadcast data, so that language codes and descriptions are available (suggested by Andreas Brugger). - When setting the audio track descriptions, the language codes are now also set in case this is a replay session (based on a patch from Rolf Ahrenberg). - If a recording starts and the channel's audio PID data has more language code information than the EPG's component data, the code from the channel is taken. - Fixed handling DPID when deciding whether to switch to 'Transfer Mode' (thanks to Marco Schlüßler). - Fixed replaying recordings of radio channels with many audio tracks (thanks to Reinhard Nissl). - Added a comment to tChannelID::nid, explaining that is is actually the "original" network id.
2006-01-29Version 1.3.41vdr-1.3.41Klaus Schmidinger
- EPG events from epg.data or SVDRP's PUTE command now have their Title set to "No Title" if none was set. - Fixed checking toFile in cCuttingThread::Action() (found in a larger patch from Artur Skawina). - Fixed a crash when pressing '0' in the "Schedule" menu on a channel that doesn't have any EPG data (reported ny Alexander Hans). - Updated the Danish OSD texts (thanks to Mogens Elneff). - Fixed a missing ',' in the Greek OSD texts (thanks to Arthur Konovalov). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed handling the tfRecording flag when reading timers (bug reported by Andreas Mair). - Now checking whether the channel exists before setting the PMT filter in cPatFilter::Process() (thanks to Thomas Bergwinkl). - Now trying to reestablish the connection to the LIRC daemon in case it breaks (thanks to Ville Skyttä). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed channel switching with the Down (Up) key in case the current channel is already the first (last) in the list (reported by Frank Krömmelbein). - Removed the "buffer reserve" in Transfer Mode - it's no longer necessary with recent driver/firmware versions. - The epg.data file is now written when VDR exits (suggested by Daniel Karsubka). - Fixed cTimers::GetNextActiveTimer() so that it won't return an expired timer (reported by Rolf Ahrenberg). - Changed DVBS_TUNE_TIMEOUT and DVBC_TUNE_TIMEOUT to 9000ms to avoid problems with channels that have low symbol rates (reported by Suur Karu). - Fixed displaying the current audio track in the channel display. - When reading epg.data (or data from PUTE), the version number of events with table IDs smaller than 0x50 is now ignored because otherwise the current running status would not be set after a restart of VDR. - Implemented a timeout for remote controls that don't deliver "repeat" keypresses very fast (based on a suggestion by Luca Olivetti; problem with the new handling of k_Repeat keypresses in channel switching reported by Udo Richter). - When looking for the present or following EPG event, the running status is now always taken into account. - Now initializing the channels' schedule pointers when reading the epg.data file, so that the first WhatsOn menu will come up faster. - If a shutdown is requested, but the shutdown script doesn't actually halt the system, it is now tried again after 5 minutes (suggested by Helmut Auer). - Separated the 'install' target into several individual targets; renamed the 'plugins-install' target to 'install-plugins' (thanks to Helmut Auer).
2006-01-15Version 1.3.39vdr-1.3.39Klaus Schmidinger
- The SVDRP command LSTT now accepts the new option 'id' to have the channels of the timers listed with their unique channel ids instead of their numbers (suggested by Matthias Schniedermeyer). - Added a missing #include <linux/unistd.h> to thread.c (thanks to Ville Skyttä). - Fixed the "plugins-clean" and "plugins-install" targets in the Makefile (thanks to Andreas Brachold). - Fixed handling "more than 3 byte" key sequences in cKbdRemote::ReadKeySequence() (thanks to Peter Bieringer). If you are using the PC keyboard as remote control input you may need to make VDR newly learn the keys by removing the remote.conf file. - To avoid problems with access rights when VDR shall run as 'root' it now skips all SetCaps() and SetUser() calls when it is started as 'root' and "-u root" is given. - Added missing i18n entry for the "Timer" button (thanks to Ville Skyttä) - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Making the "Menu" key behave consistently has not been well received by several users, so the new option "Setup/OSD/Menu button closes" can be used to get the old behavior back (which also is the default value of this option). - Dropped the default vdr user. The program now always runs under the user id it was started from, unless the '-u' option is given and it was started from the 'root' user. If you want to have a default vdr user, you can activate and adjust the "VDR_USER = vdr" line in your Make.config file (from the original patch by Ludwig Nussel). - Key macros can now be defined for all non-modeless keys (suggested by Mirko Dölle). - Adjusted the "KEY MACROS" section of vdr.5 to the new plugin calling mechanism introduced in version 1.3.32. - Removed the now obsolete "ca.conf" section from vdr.1 (thanks to Ville Skyttä). - Added missing description of L and R circular polarization to 'diseqc.conf'. - Added a note about "modprobe capability" to INSTALL (suggested by Patrick Cernko). - Fixed canonicalizing the file name in the SVDRP command GRAB to allow full path names (thanks to Stefan Huelswitt). - Added a missing '-' to the example for viewing a grabbed image on a remote host (reported by Philippe Gramoullé). - Made the "What's on now/next?" menus a lot faster by storing a pointer to each channel's schedule in the cChannel data. - Made the log messages regarding lost lock of devices "info" instead of "error" (suggested by Andreas Brachold). - The SVDRP command GRAB allows file names without extension again (suggested by Stefan Huelswitt). - Pressing '0' in the "Schedule" menu now rotates through displaying "This event on this channel", "This event on all channels" and "All events on all channels". This can be used to find reruns of a given show, or the episodes of a series. Note that if there are many channels in your channels.conf, displaying the "All events on all channels" page may take a while. - The status markers in the "Schedule" menu are now only updated if a submenu is closed in which a timer has been modified, which speeds up closing submenus. - Now only writing Dolby Digital tracks into the 'info.vdr' file of a recording if Setup.UseDolbyDigital is true (suggested by André Weidemann). - Added a leading '0' to the day in the DayDateTime() function (thanks to Rolf Ahrenberg). - No longer displaying color buttons in the recording info menu if it has been invoked from a player (reported by Jürgen Schilling).
2006-01-08Version 1.3.38vdr-1.3.38Klaus Schmidinger
- Fixed handling second audio and Dolby Digital PIDs for encrypted channels (was broken in version 1.3.37). - Improved TS/PES conversion to better handle lost TS packets (thanks to Reinhard Nissl). - Limited the frequency of log messages from the cRepackers. - Now using the gettid() syscall to get a thread's pid, so that we get a useful value on NPTL systems (suggested by Johannes Stezenbach). - Fixed the RCU remote control handling to avoid problems with NPTL (thanks to Andreas Share for reporting a lockup with the RCU on NPTL systems). - When displaying the amount of free disk space, the space consumed by recordings that have been "deleted" but not yet actually "removed" is now taken into account (suggested by Christian Vogt). - Now avoiding unnecessary disk access when checking if there are deleted recordings that need to be removed (reported by Carsten Koch). - Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now a deleted recording is retained at least DELETEDLIFETIME seconds before actually removing it. The value of DELETEDLIFETIME has been changed to 300. So after (possibly inadvertently) deleting a recording, there will be at least 5 minutes in which it can be recovered (unless a new recording immediately requires the disk space). The count starts again at 0 every time VDR is started. - Fixed a possible crash when displaying the "Low disk space!" message from a background thread (thanks to Christof Steininger). - Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler). - Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground and background threads won't interfere. - The main menu now dynamically updates its contents in case an instant recording or replay stops, etc. - The version number of EPG events is now also stored in the epg.data file (thanks to Kendy Kutzner). - EPG events that are no longer in the currently broadcasted data stream are now automatically deleted. - Removed an invalid access to Event->schedule in cSchedule::DelEvent(). - Modified cSchedule::Cleanup() (events are always sorted by time). - Schedules are now cleaned up once every hour (not only at 05:00). - The "Schedule" and "What's on now/next?" menus are now updated if a timer is set or modified. - cTimer no longer has its own 'schedule' member, it rather uses that of the event it has been set to. - The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus now immediately creates a timer for the selected event and marks it with 'T'. If the event is already marked with 'T', the "Red" button opens the "Edit timer" menu for that timer. - Removing deleted recordings is now done in a separate thread. - Dropped the unused "stop recording on primary interface" stuff. - Converting a grabbed image to JPEG is now done with the new function RgbToJpeg() (see tools.h). - The SVDRP command GRAB now determines the image type (JPEG or PNM) from the extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit 'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but has no meaning any more. - The function cDevice::GrabImage() no longer writes the grabbed image to a file, but rather returns a pointer to the image in memory. The wrapper function cDevice::GrabImageFile() can be used to write the grabbed image directly to a file. Plugins that used the old version of cDevice::GrabImage() need to be adapted to the new interface. - The new class cBase64Encoder (see tools.h) can be used to encode data in base64 (thanks to Bob Withers for publishing his Base64 class). - The SVDRP command GRAB now writes the image data to the SVDRP connection (encoded in base64) if the given file name consists of only the file extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file name (based on a suggestion from Darren Salt). A simple way of viewing a grabbed image on a remote host is: svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display - - The new command line option '-g' must be given if the SVDRP command GRAB shall be allowed to write image files to disk. The parameter to this option must be the full path name of an existing directory, without any "..", double '/' or symlinks. By default, or if "-g- is given, grabbing to files is not allowed any more because of potential security risks. - Modified the way the SVDRP command GRAB writes the grabbed image to a file to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino Peña): + The file handle is now opened in a way that it won't follow symbolic links (suggested by Darren Salt). + The given file name is now canonicalized, so that it won't contain any ".." or symlinks (suggested by Darren Salt). + Grabbing to files is limited to the directory given in the the command line option '-g'. By default grabbing to files is not allowed any more. - Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos). - Changed all "illegal" to "invalid" in error messages (there's nothing "illegal" in VDR ;-). - When started as user 'root' VDR now switches to a lesser privileged user id, keeping the capability to set the system time (based on a patch from Ludwig Nussel). By default the user id 'vdr' is used, which can be changed through the new command line option '-u'. Note that for security reasons VDR will no longer run as user 'root' (unless you explicitly start it with '-u root', but this is not recommended!). The 'runvdr' script has been changed to use the '-u' option. - Changed the API of the functions cStatus::Recording() and cStatus::Replaying(), so that they can provide the full file name of the recording. Plugins that use these (or the related cStatus::Msg...() functions) need to be adapted (suggested by Andreas Brugger). - The DVB devices now retune (and, if applicable, resend the DiSEqC data) if the lock is lost (based on a patch from Reinhard Nissl). - Fixed handling multi byte key sequences in cKbdRemote (based on a patch from Jürgen Schneider). - Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco Schlüßler). - Made the static cControl functions thread safe (thanks to Patrick Fischer). - Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid warnings with g++ 4.1.0 (thanks to Ville Skyttä). - Fixed incrementing the 'state' variables in the repacker classes in remux.c to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä). - The Makefile now reports a summary of failed plugins (thanks to Udo Richter). - The cTimer constructor can now take an optional cChannel (suggested by Patrick Fischer). - Fixed setting the main thread id if VDR is running as a daemon. - Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl). - Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner). - Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger). - Now using FE_READ_STATUS to read the current frontend status (suggested by Holger Wächtler). - The "Menu" key now behaves consistently. If there is anything on the OSD, it is closed when the "Menu" key is pressed, and if there is nothing on the OSD, the "Menu" key opens the main menu (suggested by Luca Olivetti). - The new option "Setup/OSD/Timeout requested channel info" can be used to turn off the automatic timeout of the channel display in case it was invoked by a press of the "Ok" key (suggested by Thiemo Gehrke). - A message is now given when an instant recording is started (suggested by Helmut Auer). Actually the code was already there, just commented out - don't remember why it wasn't active... - Removed an obsolete "Summary" text from i18n.c and preceded all key definition texts with "Key$" to avoid duplicates (reported by Lucian Muresan). - Preceded all button texts with "Button$". - Removed obsolete "Eject", "Language" and "scanning recordings..." texts. - Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill). - Disabled the use of "fadvise" in cUnbufferedFile because there have been several reports that it causes more problems than it solves (suggested by Petri Hintukainen). If you want to use "fadvise", you can activate the line //#define USE_FADVISE in tools.c. - Removed unused 'offset' member from cOsdItem. - In the "Channels" menu the numeric keys now position the cursor to the channel with the given number (see MANUAL, section "Remote Control Keys", note (3) for details). - The "Mark/Move" function in the "Channels" menu now also works in the non-numeric sort modes. - The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if this is a menu. - The new "Info" key brings up information on the currently viewed programme or recording. For a live programme this is the same as "Schedule/Ok", i.e. the description of the current EPG event. For a recording this is the same as shown by the "Info" button in the "Recordings" menu. Plugins that implement players can overwrite their cControl::GetInfo() function to show their own info (see PLUGINS.html for details). Pressing the "Info" key again while the info is displayed will close the OSD. In order to assign this new key to an existing remote control setup, the remote.conf file needs to be deleted and VDR has to be restarted to go through the process of learning the remote control keys. - Any cReceivers still attached to a cDevice when that device switches to a different transponder are now automatically detached (suggested by Patrick Fischer). - The "flags" of a timer are now handled as an unsigned integer value. In order to do this, the interface of cMenuEditBitItem also had to be changed. - In string entry fields (like, e.g., the file name of a recording) the characters can now be entered by pressing the numeric keys, the same way as on a telephone keypad (based on the "Easy Input" patch from Marcel Schaeben). - Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch from "single shot" to "weekly", followed by the "Right" key (reported by Andreas Böttger). - The file 'ca.conf' is obsolete and has been removed. - Revised all descriptions regarding CICAM. - Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling. - Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack() (thanks to Reinhard Nissl). - Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo Schneider). - Cleaned up some trailing white space.
2005-09-11Version 1.3.32vdr-1.3.32Klaus Schmidinger
- Added some missing braces in remux.c (thanks to Wayne Keer for reporting this one). - Removed unused MAINMENUENTRY from svdrpdemo.c (thanks to Udo Richter for reporting this one). - Fixed appending sequence end code in cDvbPlayer::Goto() (thanks to Reinhard Nissl). - Fixed syncing in cRepacker (thanks to Reinhard Nissl). - Now always using stream id 0xE0 for the video stream, to avoid problems with post processing tools that choke on different ids (suggested by Reinhard Nissl). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed cDvbPlayer::SkipFrames() to properly handle radio recordings (thanks to Reinhard Nissl). - Updated the Swedish OSD texts (thanks to Tomas Prybil). - Updated the Slovenian OSD texts (thanks to Matjaz Thaler). - Updated the Danish OSD texts (thanks to Mogens Elneff). - Made LIRC command parsing more robust (thanks to Ville Skyttä). - Introduced a separate 'plugins-install' target in the Makefile (thanks to Daniel Thompson). - Re-introduced the code that waits for a tuner lock in VDR/device.c, since apparently some users actually need it. It's not active by default, you'll have to define the WAIT_FOR_TUNER_LOCK macro in that file if you need it (suggested by Malcolm Caldwell). - Adjusted the Makefile to the dvb-kernel driver on kernel 2.6 and up (thanks to Lauri Tischler). - Repeat keys are now ignored when waiting for a keypress to cancel an operation (thanks to Marko Mäkelä). - The main menu function of a plugin can now be activated through a key macro of the form "@plugin" even if that plugin doesn't have a main menu entry (using part of a patch by Hardy Flor, which originally implemented calling plugins from SVDRP). - The menu timeout handling is now done centrally in the main program loop. - Added missing help for the 'help' keyword in the SVDRP command PLUG. - The main menu function of a plugin can now be called programmatically through the static function cRemote::CallPlugin(). - The SVDRP command PLUG now has a new option 'main' which can be used to initiate a call to the main menu function of a plugin (using part of a patch by Hardy Flor). - The new command line option '--vfat' can be used to make VDR encode special characters in recording file names, even if it wasn't compiled with VFAT=1 (suggested by Peter Bieringer). The compile time option VFAT still exists and creates a VDR that always behaves as if it were called with '--vfat'. - Replaced the ':' delimiter between hour and minute in recording file names with a '.' under Linux, too. Existing recordings with ':' as delimiter will still work. - Implemented the SVDRP command MOVC (thanks to Andreas Brachold). - Added support for multiple audio language codes in ISO639LanguageDescriptors to 'libsi' (thanks to Marcel Wiesweg). - Changed the audio PID language codes to hold up to two 3 letter codes, separated by '+', to store separate languages broadcast in two channel audio mode. - If the preferred audio language is broadcast on a PID that has two different languages in the two stereo channels, the audio channel is now properly set when switching to such a channel (thanks to Mogens Elneff for his help in testing this). - Fixed some typos in MANUAL (thanks to Ville Skyttä). - Fixed the default value for "Setup/EPG bugfix level" (thanks to Ville Skyttä for reporting this one). - Fixed defining timers that only differ in the day of week (thanks to Patrick Rother for reporting this one). - Fixed converting summary.vdr files that would result in a very long 'short text' (thanks to Carsten Koch). - Implemented a hash for the channels to reduce the system load in the EIT scanning thread (based on a patch by Georg Acher).
2005-05-29Version 1.3.25vdr-1.3.25Klaus Schmidinger
- Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Some cable providers don't mark short channel names according to the standard, but rather go their own way and use "name>short name". VDR now splits at this character for cable channels (thanks to Gerhard Steiner for reporting this one). - Added a check for Setup.DiSEqC in cDvbDevice::ProvidesTransponder(), otherwise the EPG scan didn't work on systems that don't use DiSEqC (thanks to Michael Reinelt for reporting this one). - Made the Makefile patch friendlier (thanks to Ludwig Nussel). - Made cOsd::isOpen an integer counter to avoid problems with messages when a cOsdObject uses the raw OSD (thanks to Andreas Regel for reporting this one). - Updated the Danish OSD texts (thanks to Mogens Elneff). - The file 'summary.vdr' has been replaced with 'info.vdr' and now contains the information about a recording, in the same format as the events are stored in 'epg.data' (see man vdr(5) for details). Existing summary files can be converted to the new format by running the Perl script 'summary2info.pl', as in summary2info.pl /video (the parameter given has to be the video directory). If there is no 'info.vdr' file for a recording, an attempt is made to read a 'summary.vdr'. - The "Summary" button in the "Recordings" menu has been renamed to "Info", and the page it brings up now shows the recording's information, much like the EPG event page. Therefore it now no longer uses the skin's SetText() function, but rather the SetRecording() function. Skin plugins may need to adjust that function accordingly (see skinsttng.c, for instance). - The SVDRP command LSTR now lists the recording information in the same tagged format as the LSTE command lists the EPG data. - The audio track menu now contains track descriptions when replaying (provided such descriptions were available in the EPG data when the recording was made, and are stored in the info.vdr file). - Avoiding extra blanks at the end of names of instant recordings. - Removed converting byte order on big endian systems from cDvbOsd::Flush(), which, according to Johannes Stezenbach and Paavo Hartikainen, is wrong. - Added cPlayer::DeviceSetVideoDisplayFormat() (thanks to Marco Schlüßler). - No longer saving the setup in case of a fatal error, to keep the volume level from being set to a wrong value (thanks to Marco Schlüßler). - Fixed a possible hangup when ending a replay session while cIndexFile::CatchUp() is waiting (thanks to Marco Schlüßler). - The SVDRP command DELR no longer deletes recordings that are currently being written to by a timer (thanks to Sascha Volkenandt for pointing out this one). - Pressing the "Play" key in live viewing mode now resumes a previous replay session (thanks to Mirko Dölle). - Now dropping EPG events that have a zero start time or duration (thanks to Oliver Endriss). - No longer stopping Transfer Mode or replay immediately when the Power button is pressed (thanks to Rolf Ahrenberg). - Moved the NPTL and UTF-8 checks after the version and help output (thanks to Andreas Kool for pointing out that 'vdr --version' failed on an UTF-8 system). - Made tChannelID::operator==() inline for better performance (thanks to Georg Acher). - Introduced cListBase::count for better performance (thanks to Georg Acher). - cEvent no longer stores the channelID directly, but rather has a pointer to the schedule it is in. - Now using hash tables to speed up cSchedule::GetEvent() (partially based on a patch from Georg Acher). - Avoiding unnecessary calls to getLength() in libsi/si.c, and avoiding the '& 0xff' in CRC32::crc32() of libsi/util.c (thanks to Georg Acher). - Speeded up deleting duplicate channels. - Fixed listing recordings with empty episode names in the LSTR command (thanks to Stefan Huelswitt for pointing this out). - Added cThread::SetPriority() and using it in cSectionHandler::Action() to reduce the priority of the section handler threads (as suggested by Georg Acher).
2005-03-20Version 1.3.23vdr-1.3.23Klaus Schmidinger
- The setup option "DVB/Video display format" is now only available if "Video format" is set to "4:3" (suggested by Mikko Salo). - Updated the Russian OSD texts (thanks to Vyacheslav Dikonov). - Dropped CA support for the old '-icam' firmware. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Updated the Swedish OSD texts (thanks to Tomas Prybil). - Fixed a few French OSD texts that were in the wrong place. - Improved matching timers to EPG events, especially in case there are several events with the same VPS time. - Fixed cDolbyRepacker to allow recording ProSieben HD broadcasts (thanks to Reinhard Nissl). - Fixed cDvbDevice::SetVideoDisplayFormat() in case of 16:9 (thanks to Marco Schlüßler). - The running status of a VPS event is now only taken seriously if that event has been seen within the last 30 seconds - otherwise recording is done as if no VPS was available. - The day of a timer is now stored as a full date in ISO notation ("YYYY-MM-DD") in 'timers.conf' and for the result of the SVDRP command LSTT (based in parts on a patch by Roman Krenický). - Some fixes to avoid compiler warnings in gcc 4.0 (thanks to Ville Skyttä for reporting these). - Single shot timers are now reliably deleted when they have expired. - Fixed setting the colored button help after deleting a recording in case the next menu entry is a directory (thanks to Steffen Beyer). - Improved falling back to normal recording if the VPS data hasn't been seen for more than 30 seconds. - Added a missing cMutexLock to cRemote::HasKeys() (thanks to Wolfgang Rohdewald). - All log entries regarding timers now contain a short description of the timer.
2005-01-09Version 1.3.18vdr-1.3.18Klaus Schmidinger
- Removed an unused variable from cTimer::GetWDayFromMDay() (thanks to Wayne Keer for reporting this one). - Some more changes to the 'childTid' handling in cThread (based on suggestions by Stefan Huelswitt). - Fixed the spelling of 'canceling' (thanks to Wayne Keer for reporting this one). - Re-introduced a sleep to cDvbPlayer::Action() to avoid high CPU load in still picture mode (thanks to Reinhard Nissl for reporting this one). - Fixed a possible race condition in generating the DVB device names (thanks to Rainer Zocholl for reporting this one). - Changed the way PES packets are played to allow replay of AC3 sound over the full featured DVB cards (partially based on a patch from Werner Fink). + The new function cDevice::PlayPes() is now called with the complete PES data stream and calls PlayVideo() and PlayAudio() as necessary. + cDevice::PlayVideo() is now only called with actual video PES packets. + cDevice::PlayAudio() is now called with the actual audio PES packets, which can be either "normal" audio or AC3 data. You need at least firmware version 0x261d to replay AC3 sound over a full featured DVB card. This function now has an 'int' return value. + PlayAudio() of derived cDevice classes shall no longer call the base class function. It shall just play the given data as audio. + cPlayer::PlayVideo() and cPlayer::PlayAudio() are now obsolete and have been replaced with cPlayer::PlayPes(). + All StripAudioPackets() functions are now obsolete. The functionality has been moved into cDevice::PlayPes(), where only the video and audio packets that are actually required will be processed. + All audio track handling is now done by cDevice; cTransfer and cDvbPlayer no longer care about audio tracks. cPlayer, however, still has the virtual hooks for audio track handling in order to allow plugins to implement players that have their own idea about this. + cChannel::[AD]pid[12]() have been replaced with cChannel::[AD]pid(int i) to allow access to all available PIDs. - Escaped the '-' and 'ö' characters in the man pages (thanks to Darren Salt for pointing this out). - Completed the Italian OSD texts (thanks to Sean Carlos). - Fixed setting 'synced' in cRemux when recording radio channels (thanks to Laurence Abbott). - Removed the LOCK_THREAD from the LIRC thread (thanks to Ludwig Nussel). - Fixed genfontfile.c (sometimes the character width was wrong, and the codes were shifted one too far to the left). - Fixed the character width and shifted the codes one to the right in all font files. - Renamed font???.c to font???-iso8859-1.c for symmetry. - Switched the character set to iso8859-15 for English, German and Finnish (thanks to Andreas Brugger for reporting the missing Euro sign in iso8859-1). - Added 'channels.conf.terr' entries for Lübeck (thanks to Stefan Hußfeldt). - Fixed a race condition in starting a thread (thanks to Reinhard Nissl for reporting this one). - Replaced non-threadsafe library functions with their threadsafe versions (thanks to Rainer Zocholl for pointing this out). - Other non-threadsafe functions have been replaced by threadsafe classes that hide the actual buffering. In particular these are: readdir() -> cReadDir readline() -> cReadLine - Several formerly non-threadsafe functions now have a return type of cString: cChannel::ToText() tChannelID::ToString() cEvent::GetDateString() cEvent::GetTimeString() cEvent::GetEndTimeString() cEvent::GetVpsString() cMark::ToText() cTimer::ToText() cSource::ToString() cTimer::PrintDay() cTimer::PrintFirstDay() PrefixVideoFileName() IndexToHMSF() ChannelString() strescape() AddDirectory() itoa() WeekDayName() DayDateTime() When using these functions in a 'const char *' context there is nothing special to consider, except that you can no longer have a pointer to the return value, as in const char *date = DayDateTime(); Although this will compile without error message, the resulting 'date' will not be valid after this line. Use this instead: cString date = DayDateTime(); In a 'const void *' context (as in printf() etc.) the result needs to be dereferenced with a '*', as in printf("%s", *DayDateTime()); to make it a 'const char *'. - Removed delay_ms(), using cCondWait::SleepMs() instead. - Replaced time_ms() with a threadsafe and non-overflowing cTimeMs (thanks to Rainer Zocholl for pointing out this problem). - Added cDevice::mutexReceiver to avoid a race condition when attaching/detaching receivers from different threads. - The new remote control button "Audio" can be used to switch between different audio tracks. The "Green" button in the "Main" menu has been changed from "Language" to "Audio", since it now also controls switching between normal and Dolby Digital audio tracks (see MANUAL for details). - The description of the audio tracks is now taken from the "component descriptors" that are broadcast in the EPG data. However (as no big surprise), not all channels actually provide useful data here, so there are now some additional EPG bugfixes, which can be activated by setting the "EPG bugfix level" to 3. - The format of the 'epg.data' files has been extended by the new tag 'X', which contains the stream components of an event (see man vdr(5) for details). - The cStatus class now has the new member function SetAudioTrack(), which can be used to get notified when the audio track has been switched, and the new member function SetAudioChannel() which is called when the audio channel is changed. - Skins need to implement the new cSkinDisplayTrack class to display the audio track menu. - The ST:TNG skin now displays the current audio track description (if any) at the botton left side. - The new setup option "DVB/Audio languages" can be used to control which audio language shall be selected in case a channel broadcasts in different languages (see MANUAL for details). - The "Left" and "Right" keys in the "Audio" menu can be used to switch between the left and right stereo channels in case there are different audio tracks in these channels (see MANUAL for details). - Fixed a possible race condition in cDevice::Action() (thanks to Mattias Grönlund). - Fixed the default quality value when grabbing a JPEG image (thanks to Patrick Gleichmann). - Fixed deleting a menu item in case the next item is not selectable (thanks to Dino Ravnic). - Implemented displaying mandatory subtitles in the SPU decoder (thanks to Marco Schlüßler). - The setup option "Recording/Record Dolby Digital" has been renamed and moved to "DVB/Use Dolby Digital". It now controls whether Dolby Digital is recorded and whether an available DD audio track will appear in the "Audio" menu. - Added support for circular polarization (thanks to Jonan Santiago). - Thanks to Werner Fink, Reinhard Nissl, Sascha Volkenandt and Bjørnar Nilsen for their support in testing and fine tuning this version.
2004-11-01Version 1.3.15vdr-1.3.15Klaus Schmidinger
- Fixed some typos in the Makefile's 'font' target (thanks to Uwe Hanke). - Added more checks and polling when getting frontend events (based on a patch from Werner Fink). - No longer explicitly waiting for a tuner lock when switching channels (apparently setting "live" PIDs before the tuner is locked doesn't hurt). Moved the wait into cDevice::AttachReceiver() instead. - Immediately displaying the new channel info when switching channel groups. - Moved the main program loop variables further up to allow compilation with older compiler versions (thanks to Marco Schlüßler for reporting this one). - Now calling pthread_cond_broadcast() in the destructor of cCondWait and cCondVar to make sure any sleepers will wake up (suggested by Werner Fink). Also using pthread_cond_broadcast() instead of pthread_cond_signal() in cCondWait, in case there is more than one sleeper. - Making sure that timers and channels are only saved together, in a consistent manner (thanks to Mirko Dölle for reporting a problem with inconsistent channel and timer lists). - Now handling the channel name, short name and provider separately. cChannel therefore has two new functions, ShortName() and Provider(). ShortName() can be used to display a short version of the name (in case such a version is available). The optional boolean parameter of ShortName() can be set to true to make it return the name, if no short name is available. The sequence of 'name' and 'short name' in the channels.conf file has been swapped (see man vdr(5)). - Added the 'portal name' to cChannels (thanks to Marco Schlüßler). - Fixed handling key codes that start with 0x1B in the KBD remote control code. - Now using qsort() to sort cListBase lists. For this, the virtual function cListObject::operator<() has been replaced with cListObject::Compare(). Plugins that implement derived cListObject classes may need to adjust their code. - The "Channels" menu can now be sorted "by number" (default), "by name" and "by provider". While in the "Channels" menu, pressing the '0' key switches through these modes. - Fixed the buffer size in cRecording::SortName(). - Now displaying the name of the remote control for which the keys are being learned inside the menu to avoid overwriting the date/time in the 'classic' skin (thanks to Oliver Endriss for reporting this one).
2004-10-24Version 1.3.14vdr-1.3.14Klaus Schmidinger
- Fixed detecting transponder lock in cDvbTuner (based on a patch from Stefan Meyknecht). - What was previously marked with WAIT_FOR_LOCK_AFTER_TUNING is now permanently active and uses a cCondVar to signal when a transponder is locked. - Added some missing 'const' to cChannel. - Added a sample setup for 'DisiCon-4 Single Cable Network' to 'diseqc.conf' (thanks to Oliver Endriss). - Fixed attaching a cPlayer to a cDevice, so that 'Operation not permitted' errors don't occur any more (thanks to Marco Schlüßler). - Fixed a case where the resultBuffer in cRemux ran full before getting a sync. - Removed the usleep() call from cDvbPlayer::Action() to make VDR run on NPTL systems (thanks to Alfred Zastrow). The NPTL check at startup has also been removed. - Taking the complete size of available data into account when deciding whether to clear the transfer buffer to avoid overflows (thanks to Reinhard Nissl). - Updated Romanian language texts and the iso8859-2 fonts (thanks to Lucian Muresan). - Now actually using the iso8859-15 fonts (thanks to Lucian Muresan). - Some minor code cleanups (thanks to Prakash K. Cheemplavam). - Fixed missing cleanup at program exit in case there is a problem with a plugin (thanks to Mattias Grönlund for pointing this out). - Increased the required free buffer space in the resultBuffer of cRemux to 2 * IPACKS to avoid a buffer overflow in case a cTS2PES writes one complete packet and then (within processing the same TS packet) wants to write another small packet. - Removed the signal handler and WakeUp() call from cThread (it is no longer needed). - Added some checks when canceling a thread and removed the usleep() in cThread::Start() (suggested by Ludwig Nussel). Also removed 'running' from cThread and using only childTid to indicate whether a thread is actually running. - Added cCondWait::Sleep() and using it to replace all usleep() calls (based on a suggestion by Werner Fink). - Only assigning events to timers if the related schedule has actually been modified. - When searching for the present event, the running status is now only taken into account if the event has been "seen" within the past 30 seconds. This avoids shortly seeing the wrong events in the channel display when switching to a channel that hasn't been tuned to in a while.
2004-03-14Version 1.3.6vdr-1.3.6Klaus Schmidinger
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed some descriptor handling in 'libsi' (thanks to Stéphane Esté-Gracias). - Fixed handling the current menu item (thanks to Marc Hoppe). - Fixed assigning events to timers (they no longer get "stuck"). - Added log entries whenever the running status of an event changes (currently only logging the first 30 channels). - Fixed handling timers in VPS margin if the EPG scan is turned on (the EPG scan switched the device away from the channel, so it wouldn't see the change of the running status). - Fixed handling "itemized" texts in EPG data (thanks to Stéphane Esté-Gracias for pointing out this problem, and Marcel Wiesweg for improving 'libsi'). - Fixed handling VPS times at year boundaries. - Avoiding too many consecutive "ring buffer overflow" messages (which only slowed down performance even more). - Taking the Sid into account when detecting version changes in processing the PMT (thanks to Stéphane Esté-Gracias for pointing out this problem). - Completed the Russian OSD texts (thanks to Vyacheslav Dikonov). - Any newline characters in the 'description' of EPG events are now preserved to allow texts to be displayed the way the tv stations have formatted them. This was also necessary to better display itemized texts. - Fixed detecting the running status in case an empty EPG event is broadcast (thanks to Michael Pennewiß for pointing this out). - Improved performance when paging through very long menu lists. - Removed cSchedule::GetEventNumber() and cSchedule::NumEvents(). There is now cSchedule::Events() that returns the list of events directly. - Avoiding occasional bad responsiveness to user interaction caused by assigning events to timers. - Now explicitly turning on the LNB power at startup, because newer drivers don't do this any more (thanks to Oliver Endriss for pointing this out).
2004-02-29Version 1.3.5vdr-1.3.5Klaus Schmidinger
- Fixed reading the EPG preferred language parameter from 'setup.conf'. - Fixed switching to a visible programme in case the current channel has neither a video nor an audio PID. - Fixed editing channels (SID now range checked) and creating new channels (NID, TID and RID are now set to 0). - Fixed transponder handling to make it work with satellites that provide two transponders on the same frequency, with different polarization, like Hispasat at S30.0W (thanks to Thomas Bergwinkl for pointing this out). See man vdr(5) for details about the enhanced channel ID format. - Since there appears to be no general solution for the UPT error yet, a recording now initiates an "emergency exit" if the number of UPT errors during one recording exceeds 10 (suggested by Gregoire Favre). Since the UPT error doesn't happen on my system, this has not been explicitly tested. The "preliminary fix" for the UPT error in VDR/dvbdevice.c has been disabled by default, since it makes channel switching unpleasently slow. If you want to have that workaround back, you can uncomment the line //#define WAIT_FOR_LOCK_AFTER_TUNING 1 in VDR/dvbdevice.c. - Adapted the 'sky' plugin to use the actual channel IDs, and to fetch EPG data from www.bleb.org. - Limited automatic retuning to devices that actually provide the transponder (necessary for the 'sky' plugin). - Fixed handling receivers in the 'sky' plugin, so that a recording on the same channel won't interrupt an ongoing Transfer Mode. - Added subtable ID and TSDT handling to 'libsi' (thanks to Marcel Wiesweg). - Fixed some Russian OSD texts (thanks to Vyacheslav Dikonov). - Added the 'running status' to the EPG events. This is necessary for implementing the VPS function for recording. - Removed the obsolete 'present' and 'following' handling from the EPG data. - The EPG data is now always kept sorted chronologically in the internal data structures. This also means that any EPG data retrieved through the SVRDP command LSTE is guaranteed to be sorted by start time. - Now using the 'running status' in the channel display, so that a programme that has an end time that is before the current time, but is still running, will still be shown in the display (provided the broadcasters handle the 'running status' flag correctly). This also applies to programmes that have a start time that is in the future, but are already running. - Implemented an "EPG linger time", which can be set to have older EPG information still displayed in the "Schedule" menu (thanks to Jaakko Hyvätti). - Added PDCDescriptor handling to 'libsi'. - Implemented handling the VPS timestamps (aka "Programme Identification Label") for full VPS support for timers (provided the tv stations actually broadcast this information). The VPS time is displayed in the event info page if it exists and is different than the event's start time. - Extended the SVDRP command LSTE to allow limiting the listed data to a given channel, the present or following events, or events at a given time (thanks to Thomas Heiligenmann). - Fixed a typo in libsi/si.h (thanks to Stéphane Esté-Gracias). - Timers can now be set to use the VPS information to control recording a programme. The new setup options "Recording/Use VPS" and "Recording/VPS margin", as well as the "VPS" option in the individual timers, can be used to control this feature (see MANUAL for details). Note that this feature will certainly need a lot of testing before it can be called "safe"! - The "Schedule" and "What's on now/next?" menus now have an additional column which displays information on whether there is a timer defined for an event, whether an event has a VPS time that's different than its start time, and whether an event is currently running (see MANUAL under "The "Schedule" Menu" for details).
2004-01-11Version 1.3.1vdr-1.3.1Klaus Schmidinger
- Fixed a lockup in the EPG scanner when no non-primary device was available (thanks to Martin Holst for reporting this one). - Fixed a compiler warning about virtual cConfig::Load() functions (thanks to Lauri Tischler for reporting this one). - Fixed a warning about character comparison in libsi/si.c (thanks to Lauri Tischler for reporting this one). - The new parameter "Update channels" in the "Setup/DVB" menu can be used to control if and how channels will be automatically updated (see MANUAL). This has already been part of the 'autopid' patch by Andreas Schultz and has now been adopted. - Fixed a crash in case there is no DVB hardware present (thanks to Sascha Volkenandt for reporting this one). - Changed calculation of channel ids to make it work for tv stations that use the undefined NID value 0 (thanks to Teemu Rantanen for reporting this one). - Enhanced the SDT filter to handle multi part sections. - Added support for selecting preferred EPG languages (based upon a patch by Teemu Rantanen). - Fixed a 'const' in libsi/si.h (thanks to Marcel Wiesweg). - Fixed the 'su' call in 'runvdr' to make it work on systems that require the user name to appear before the command option (thanks to Robert Huitl). - Fixed testing for matching section filters in case they are turned off (thanks to Marcel Wiesweg). - In case of incomplete sections an error message is now logged only every 10 seconds. - Fixed a possible NULL pointer access in cEITScanner::Process() (thanks to Andreas Kool). - The actual transponder data is now taken from the NIT and existing channels are adjusted if necessary. If the NIT contains new transponders, they are scanned for channels during the next EPG scan. Note that only the satellite branches are tested, cable and terrestrial need to be tested by somebody who actually has such equipment.
2004-01-04Version 1.3.0vdr-1.3.0Klaus Schmidinger
- Changed thread handling to make it work with NPTL ("Native Posix Thread Library"). Thanks to Jon Burgess, Andreas Schultz, Werner Fink and Stefan Huelswitt. - The cThread class now accepts a 'Description' parameter, which is used to log the beginning and end of the thread, together with its process and thread id. For descriptions that need additional parameters you can use the function cThread::SetDescription(), which accepts 'printf()' like arguments. Existing plugins that use threads should be changed to use this functionality instead of explicit 'dsyslog()' calls inside their Action() function in order to support logging the thread ids. - Added "Slovak Link" and "Czech Link" to 'ca.conf' (thanks to Emil Petersky). However, 'ca.conf' is now pretty much obsolete due to the automatic CA handling. - Mutexes are now created with PTHREAD_MUTEX_ERRORCHECK_NP, which makes the 'lockingTid' stuff obsolete (thanks to Stefan Huelswitt). - Changed font handling to allow language specific character sets. - Adopted the small font character set from the "Elchi" patch (originally provided by Alessio Sangalli). - Greek language texts now use iso8859-7 character set (thanks to Dimitrios Dimitrakos). - Rearranged section data handling, so that the actual data handling can be done separately, even from within plugins. - The EPG data structures have been moved from eit.[hc] to epg.[hc] and have been adapted to the general VDR coding style. Plugins that use these data structures may need to change some function names (which should be obvious). The name 'subtitle' has been changed to 'shortText' to avoid clashes with actual subtitles that are part of a movie. The name 'extendedDescription' has been shortened to 'description'. - Replaced 'libdtv' with 'libsi' (thanks to Marcel Wiesweg), which is thread safe and can be used by multiple section filters simultaneously. - Added 'cRwLock' to 'thread.[hc]'. Note that all plugin Makefiles need to define _GNU_SOURCE for this to work (see the example plugin Makefiles and 'newplugin'). - Fixed a problem with crc32 in SI handling on 64bit systems (thanks to Pedro Miguel Sequeira de Justo Teixeira for reporting this one). - Fixed an alignment problem in CAM access on 64bit systems (thanks to Pedro Miguel Sequeira de Justo Teixeira for reporting this one). - Added 'StreamType' setting to CAM communication, which is important for Aston/SECA CAMs (thanks to Antonino Sergi). - Now the CA descriptors are sent to the CAM in the 'program' or 'ES level' sections, depending on where they are found in the PMT (thanks to Hans-Peter Raschke for reporting this one). This should make SkyCrypt CAMs work. - Now using the 'version number' of EPG events to avoid unnecessary work. - Channel data is now automatically derived from the DVB data stream (inspired by the 'autopid' patch from Andreas Schultz). - The current channel is now automatically re-tuned if the PIDs or other settings change. If a recording is going on on a channel that has a change in its settings, the recording will be stopped and immediately restarted to use the new channel settings. - EPG events now use the complete channel ID with NID, TID and SID. - Channel names in 'channels.conf' can now have a short form, as provided by some tv stations (see man vdr(5)). Currently channels that provide short names in addition to long ones are listed in the OSD as "short,long name", as in "RTL,RTL Television". The short names will be used explicitly later. - The Ca parameter in 'channels.conf' has been extended and now contains all the CA system ids for the given channel. When switching to a channel VDR now tests for a device that provides one of these CA system ids. The devices automatically get their supported ids from the CI handler. - The values in 'ca.conf' are currently without any real meaning. Whether or not a channel with conditional access can be received is now determined automatically by evaluating its CA descriptors and comparing them to the CA system ids provided by the installed CAM. Only the special values 1-16 are used to assign a channel to a particular device. - Increased the maximum number of possible OSD colors to 256. - Limited the line length in the EPG bugfix report, which appears to fix a buffer overflow that caused a crash when cleaning up the EPG data (at 05:00 in the morning).