| Age | Commit message (Collapse) | Author |
|---|
|
- Fixed detecting transponder lock in cDvbTuner (based on a patch from Stefan
Meyknecht).
- What was previously marked with WAIT_FOR_LOCK_AFTER_TUNING is now permanently
active and uses a cCondVar to signal when a transponder is locked.
- Added some missing 'const' to cChannel.
- Added a sample setup for 'DisiCon-4 Single Cable Network' to 'diseqc.conf'
(thanks to Oliver Endriss).
- Fixed attaching a cPlayer to a cDevice, so that 'Operation not permitted'
errors don't occur any more (thanks to Marco Schlüßler).
- Fixed a case where the resultBuffer in cRemux ran full before getting a sync.
- Removed the usleep() call from cDvbPlayer::Action() to make VDR run on NPTL
systems (thanks to Alfred Zastrow). The NPTL check at startup has also been
removed.
- Taking the complete size of available data into account when deciding whether
to clear the transfer buffer to avoid overflows (thanks to Reinhard Nissl).
- Updated Romanian language texts and the iso8859-2 fonts (thanks to Lucian Muresan).
- Now actually using the iso8859-15 fonts (thanks to Lucian Muresan).
- Some minor code cleanups (thanks to Prakash K. Cheemplavam).
- Fixed missing cleanup at program exit in case there is a problem with a plugin
(thanks to Mattias Grönlund for pointing this out).
- Increased the required free buffer space in the resultBuffer of cRemux to
2 * IPACKS to avoid a buffer overflow in case a cTS2PES writes one complete
packet and then (within processing the same TS packet) wants to write another
small packet.
- Removed the signal handler and WakeUp() call from cThread (it is no longer
needed).
- Added some checks when canceling a thread and removed the usleep() in
cThread::Start() (suggested by Ludwig Nussel). Also removed 'running' from
cThread and using only childTid to indicate whether a thread is actually
running.
- Added cCondWait::Sleep() and using it to replace all usleep() calls (based
on a suggestion by Werner Fink).
- Only assigning events to timers if the related schedule has actually been
modified.
- When searching for the present event, the running status is now only taken
into account if the event has been "seen" within the past 30 seconds.
This avoids shortly seeing the wrong events in the channel display when
switching to a channel that hasn't been tuned to in a while.
|
|
- Fixed checking for the presence of NPTL (thanks to Jouni Karvo).
- Making sure section filters are only set if the device actually has a lock
(thanks to Andreas Share for pointing this out).
- Fixed a possible NULL pointer assignment in cMenuText::SetText() (thanks to
Marco Schlüssler).
- Fixed a crash in case the last line in channels.conf is a group separator and
that group is selected in the channel display (thanks to Dick Streefland).
- Added cRingBufferLinear::Read() to read directly from a file handle into the
ring buffer.
- Using timeouts in ring buffers to avoid 'usleep()'.
- Clearing the 'Transfer Mode' ring buffer after clearing the device to avoid
an "almost full" ring buffer.
- Removed locking from cRingBufferLinear for better performance under high load.
- Using a cRingBufferLinear in cRemux to avoid unnecessary copying of data.
- Using a cRingBufferLinear in cTSBuffer and filling it in a separate thread
to avoid buffer overflows. Plugins using cTSBuffer will need to remove the
call to the now obsolete Read() function (see cDvbDevice::GetTSPacket() for
the new usage of cTSBuffer).
- cRemux::Process() has been split into Put(), Get() and Del() to allow for a
better decoupling of the remuxing and disk writing process. Plugins using
cRemux will need to be modified accordingly.
- The actual disk writing in recordings is now done in a separate thread to
improve the overall throughput.
- Changed cRemux so that it returns the maximum available amount of data with
each call, not just 2048 byte.
- Added a visual display of all cRingBufferLinear buffers for debugging. To
activate it, define DEBUGRINGBUFFERS in ringbuffer.h.
- Instead of cCondVar now using the new cCondWait (which also avoids a possible
"near miss" condition; thanks to Sascha Volkenandt for pointing out this one).
cCondVar is still present for plugins that use it (and VDR itself also still
uses it in cRemote).
- The cRingBuffer now does EnableGet()/EnablePut() only if the buffer is more than
one third full or empty, respectively. This dramatically improves recording
performance and reduces system load (thanks to Marco Schlüßler for doing some
testing regarding buffer performance and giving me some hints that finally led
to finding out that this was the basic problem causing buffer overflows).
- Improved Transfer Mode (thanks to Marco Schlüßler for suggestions and testing).
- Fixed a possible crash with inconsistent SI data (thanks to Marcel Wiesweg).
- Fixed showing the replay mode if the OSD is currently in use (thanks to Kimmo
Tykkala for pointing out this problem).
- cOsdProvider::NewOsd() now always returns a valid pointer, even if the OSD is
currently in use (it will then return a dummy cOsd object and write a message to
the log file).
- Added Estonian language texts (thanks to Arthur Konovalov).
- Fixed 'newplugin' and libsi/Makefile to use the compiler defined in $(CXX) for
generating file dependencies (thanks to Andreas Brachold).
- Moved the initialization of aPid1 and aPid2 to the beginning of cDvbDevice::cDvbDevice()
to have them set in case a patch references them (thanks to Wayne Keer for pointing
this out).
- Completed the Russian OSD texts (thanks to Vyacheslav Dikonov).
- Avoiding unnecessary section filter start/stops (thanks to Marco Schlüßler).
- Made the "Channel not available!" message and mtInfo instead of mtError (suggested
by Wayne Keer).
- Made volume control more linear (thanks to Emil Naepflein and Udo Richter).
- Now skipping code table info in SI data (suggested by Milos Kapoun).
- Added missing Czech characters to fontosd-iso8859-2.c (thanks to Milos Kapoun).
- Fixed a crash in the time search mechanism (reported by Reinhard Nissl).
- If one PID can't be added, the whole cDevice::AttachReceiver() will now fail
and all PIDs added so far will be deleted (thanks to Marco Schlüßler for
pointing out this one).
- Now only saving channels.conf after a modification made by the user (avoids
lots of disk access due to automatic channel updates). Automatic channel
modifications will be saved every 10 minutes if no recording is currently
active.
- Removed the 'Log' parameter from the cChannel::Set... functions. Instead
checking if the channel has a non-zero number.
- Updated 'channels.conf.terr' for Hannover (thanks to Sven Kreiensen).
|
|
- Completed Croatian language texts (thanks to Drazen Dupor).
- New iso8859-2 font to fix the problem with program freezes (thanks to Drazen Dupor).
- Implemented a default cRemote::Initialize() that waits 10 seconds for a keypress
in order to prevent a "hangup" in case, e.g., the LIRC driver is not loaded (thanks
to Helmut Auer).
- Updated 'channels.conf.terr' for Hannover (thanks to Peter Waechtler).
- cBitmap::DrawBitmap() now also resets the palette if the entire bitmap area is
covered (suggested by Sascha Volkenandt).
- Fixed setting the title in the replay display of the "Classic VDR" skin in case
a shorter title is set after a longer one (thanks to Stefan Huelswitt for
reporting this one).
- Now using more separate areas in the "ST:TNG Panels" skin to allow a theme to
use more independent clrMenu* colors.
- Fixed removing the "scanning recordings..." message in case the video directory
is empty (thanks to Andreas Regel for reporting this one).
- Added SetMessage() functions to the Replay and Channel skin functions. Plugins
that implement skins will need to implement these functions. This fixes a missing
"Editing process finished" message (thanks to Oliver Endriss for reporting this
one).
- Fixed the height of the channel display in the "Classic VDR" skin.
- Fixed handling descriptor loops in 'libsi', which had sometimes caused invalid
CA ids to be added to the channel definitions (thanks to Wayne Keer for reporting
this one, and Marcel Wiesweg for fixing it).
- Fixed handling colors in cDvbSpuPalette::yuv2rgb() (thanks to Marco Schlüßler).
- Made some functions of cFont virtual to allow implementing dummy fonts for the
'curses' skin.
- The new plugin 'skincurses' re-implements the functionality that was previously
available by compiling VDR with DEBUG_OSD. Some things may not yet work as they
should, but it's a starting point.
|
|
- Fixed a crash when switching the skin and having selected a non-default theme
that is not available for the newly selected skin (thanks to Sascha Volkenandt
for reporting this one).
- Fixed some issues with gcc 3.4 (thanks to Prakash K. Cheemplavam and Marcel
Wiesweg).
- Added a hint to PLUGINS.html about how to name a plugin that implements a skin.
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Single shot timers and events now show the day of week (adopted with some changes
from the "elchi" patch, orginally introduced by Oskar Signell). Plugins that use
cEvent::GetDateString() should note that this function now returns a longer
string, including the day of week. The new function const char *WeekDayName(time_t t)
can be called with a time_t value to get the day of week for that time.
- When processing XPM data, the color name "None" is now mapped to #00000000, which
is "fully transparent" (suggested by Sascha Volkenandt).
- Fixed the OSD alignment in the SPU decoder (thanks to Miko Wohlgemuth for reporting
this one and helping to test the fix).
- Fixed freezing picture when a recording starts on a system that always uses
'Transfer Mode' (thanks to Michal Dobrzynski for reporting this one).
- Fixed a memory leak in NIT processing (thanks to Marcel Wiesweg).
- Added a few missing initializations (thanks to Marcel Wiesweg).
- Moved the declaration of cMenuText to VDR/menu.h to make it available to plugins.
It now also has a SetText() function that can be used to dynamically set the text
in an already existing cMenuText (both suggested by Stefan Huelswitt).
- Added play mode pmVideoOnly (thanks to Marcel Wiesweg).
- Added a missing cStatus::MsgOsdClear() to cDisplayChannel::~cDisplayChannel()
(thanks to Oliver Endriss).
- No longer displaying unused color buttons in the "Classic VDR" skin (thanks to
Oliver Endriss for reporting this one).
- Added some missing cStatus::MsgOsdTextItem() calls (thanks to Oliver Endriss for
reporting this one).
|
|
- Fixed a memory leak in thread handling when using NPTL (thanks to Jon Burgess).
- Fixed handling Setup.RecordDolbyDigital, which was broken since version 1.1.6.
- Fixed handling text lengths for itemized EPG texts (thanks to Marcel Wiesweg).
- Fixed the help for LSTE and LSTR (was broken in 1.3.6).
- Improved iso8859-7 fonts (thanks to Dimitrios Dimitrakos).
- Added some 3-letter language codes (thanks to Marcus Mönnig).
- Added language code handling to the subtitling descriptor in 'libsi' (thanks to
Pekka Virtanen).
- Moved several menu item classes from menu.c to menuitems.[hc] to make them
available for plugins.
- The epg2html.pl script now handles '|' in description texts.
- The new setup option "OSD/Use small font" can be used to control the use of
the small font (see MANUAL for details).
- Swapped osd.[hc] and osdbase.[hc] to have the virtual OSD base class named cOsd.
Plugins may need to adjust their #include statements.
- Colors are now given as AARRGGBB instead of AABBGGRR. The values are mapped to
the driver's (wrong) sequence in dvbosd.c (this should really be fixed in the
driver, together with the endian problem).
- The new OSD setup parameters "Left" and "Top" can be used to define the top left
corner of the OSD.
- The OSD size parameters are now in pixel (as opposed to formerly characters).
When reading a 'setup.conf' file from an older version of VDR, the OSDwidth
and OSDheight values will be converted to pixel automatically.
- The OSD is now fully device independent. See the comments in VDR/osd.h and the
description in PLUGINS.html for information on how a plugin can implement an OSD
display on arbitrary hardware.
- The OSD (actually its cBitmap class) can now handle XPM files. There are several
XPM files in the VDR/symbols directory which can be used by skins (some of these
have been taken from the "elchi" patch). See VDR/skinsttng.c for examples on how
to use these.
- Due to the changes in the OSD handling the DEBUG_OSD option for a textual OSD
has been dropped. There will be a plugin that implements a skin with this
functionality later.
- The entire OSD display can now be implemented via "skins". See VDR/skins.[hc],
VDR/skinclassic.[hc], VDR/skinsttng.[hc] and PLUGINS.html for information on how
a plugin can implement its own skin. By default VDR comes with a "Classic" skin
that implements the OSD display known from previous versions, and the new skin
named "ST:TNG Panels", which is also the default skin now. The actual skin can
be selected through "Setup/OSD/Skin".
- The colors used in a skin can now be configured using "themes". See PLUGINS.html
for information on how a skin can make use of themes, and man vdr(5) for the
structure of a theme file. The actual theme to use can be selected through
"Setup/OSD/Theme".
- Added Croatian language texts (thanks to Drazen Dupor).
NOTE: there is apparently a problem with the newly introduced iso8859-2 font,
because as soon as Setup/OSD/Language is set to Croatian (currently the last one
in the list) everything freezes and the vdr processes have to be killed with -9
and the driver needs to be reloaded. Maybe somebody else can find out what's
going wrong here...
- Added missing NULL checks when accessing sectionHandler in device.c (thanks to
Pekka Virtanen).
- Fixed setting the time from the DVB data stream (thanks to Helmut Auer for
pointing out a frequency/transponder handling mixup). This now also takes the
actual source (sat, cable etc.) into account. Please go into "Setup/EPG" and
set the "Set system time" and "Use time from transponder" parameters accordingly
(this is necessary even if you have already set them before!).
|
|
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed some descriptor handling in 'libsi' (thanks to Stéphane Esté-Gracias).
- Fixed handling the current menu item (thanks to Marc Hoppe).
- Fixed assigning events to timers (they no longer get "stuck").
- Added log entries whenever the running status of an event changes (currently
only logging the first 30 channels).
- Fixed handling timers in VPS margin if the EPG scan is turned on (the EPG scan
switched the device away from the channel, so it wouldn't see the change of
the running status).
- Fixed handling "itemized" texts in EPG data (thanks to Stéphane Esté-Gracias
for pointing out this problem, and Marcel Wiesweg for improving 'libsi').
- Fixed handling VPS times at year boundaries.
- Avoiding too many consecutive "ring buffer overflow" messages (which only
slowed down performance even more).
- Taking the Sid into account when detecting version changes in processing the
PMT (thanks to Stéphane Esté-Gracias for pointing out this problem).
- Completed the Russian OSD texts (thanks to Vyacheslav Dikonov).
- Any newline characters in the 'description' of EPG events are now preserved
to allow texts to be displayed the way the tv stations have formatted them.
This was also necessary to better display itemized texts.
- Fixed detecting the running status in case an empty EPG event is broadcast (thanks
to Michael Pennewiß for pointing this out).
- Improved performance when paging through very long menu lists.
- Removed cSchedule::GetEventNumber() and cSchedule::NumEvents(). There is now
cSchedule::Events() that returns the list of events directly.
- Avoiding occasional bad responsiveness to user interaction caused by assigning
events to timers.
- Now explicitly turning on the LNB power at startup, because newer drivers don't
do this any more (thanks to Oliver Endriss for pointing this out).
|
|
- Fixed reading the EPG preferred language parameter from 'setup.conf'.
- Fixed switching to a visible programme in case the current channel has neither
a video nor an audio PID.
- Fixed editing channels (SID now range checked) and creating new channels (NID,
TID and RID are now set to 0).
- Fixed transponder handling to make it work with satellites that provide two
transponders on the same frequency, with different polarization, like Hispasat
at S30.0W (thanks to Thomas Bergwinkl for pointing this out). See man vdr(5)
for details about the enhanced channel ID format.
- Since there appears to be no general solution for the UPT error yet, a recording
now initiates an "emergency exit" if the number of UPT errors during one
recording exceeds 10 (suggested by Gregoire Favre). Since the UPT error doesn't
happen on my system, this has not been explicitly tested.
The "preliminary fix" for the UPT error in VDR/dvbdevice.c has been disabled
by default, since it makes channel switching unpleasently slow. If you want
to have that workaround back, you can uncomment the line
//#define WAIT_FOR_LOCK_AFTER_TUNING 1
in VDR/dvbdevice.c.
- Adapted the 'sky' plugin to use the actual channel IDs, and to fetch EPG data
from www.bleb.org.
- Limited automatic retuning to devices that actually provide the transponder
(necessary for the 'sky' plugin).
- Fixed handling receivers in the 'sky' plugin, so that a recording on the same
channel won't interrupt an ongoing Transfer Mode.
- Added subtable ID and TSDT handling to 'libsi' (thanks to Marcel Wiesweg).
- Fixed some Russian OSD texts (thanks to Vyacheslav Dikonov).
- Added the 'running status' to the EPG events. This is necessary for implementing
the VPS function for recording.
- Removed the obsolete 'present' and 'following' handling from the EPG data.
- The EPG data is now always kept sorted chronologically in the internal data
structures. This also means that any EPG data retrieved through the SVRDP
command LSTE is guaranteed to be sorted by start time.
- Now using the 'running status' in the channel display, so that a programme
that has an end time that is before the current time, but is still running,
will still be shown in the display (provided the broadcasters handle the
'running status' flag correctly). This also applies to programmes that have
a start time that is in the future, but are already running.
- Implemented an "EPG linger time", which can be set to have older EPG information
still displayed in the "Schedule" menu (thanks to Jaakko Hyvätti).
- Added PDCDescriptor handling to 'libsi'.
- Implemented handling the VPS timestamps (aka "Programme Identification Label")
for full VPS support for timers (provided the tv stations actually broadcast
this information). The VPS time is displayed in the event info page if it exists
and is different than the event's start time.
- Extended the SVDRP command LSTE to allow limiting the listed data to a given
channel, the present or following events, or events at a given time (thanks to
Thomas Heiligenmann).
- Fixed a typo in libsi/si.h (thanks to Stéphane Esté-Gracias).
- Timers can now be set to use the VPS information to control recording a programme.
The new setup options "Recording/Use VPS" and "Recording/VPS margin", as well as
the "VPS" option in the individual timers, can be used to control this feature
(see MANUAL for details).
Note that this feature will certainly need a lot of testing before it can be
called "safe"!
- The "Schedule" and "What's on now/next?" menus now have an additional column
which displays information on whether there is a timer defined for an event,
whether an event has a VPS time that's different than its start time, and
whether an event is currently running (see MANUAL under "The "Schedule" Menu"
for details).
|
|
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added ISO639LanguageDescriptor to 'libsi'.
- Changed the 'languageCode' members in the descriptor classes of 'libsi' to
'char[4]' and setting the 4th byte to 0 for easier handling.
- Fixed frequency handling when setting the CA descriptors in cDvbTuner::Action()
(thanks to Jan Ekholm for reporting and helping to debug this one).
- Now setting CA descriptors even if "Setup/DVB/Update channels" is less than 2.
- There can now be up to 32 audio and Dolby PIDs (however, currently still only
the first two are used throughout the rest of the program).
- The audio and Dolby PIDs in 'channels.conf' now can have an optional language
code (see man vdr(5)). Currently this is only stored and not yet used otherwise.
- Added a call to cStatus::MsgOsdCurrentItem() to cMenuEditItem::SetValue()
(thanks to Martin Hammerschmid).
|
|
- Fixed resetting the EPG data versions after changing the preferred languages
(thanks to Teemu Rantanen for reporting this one and helping to debug it).
- Added LinkageDescriptor handling to 'libsi' (thanks to Marcel Wiesweg).
- Added Russian language texts (thanks to Vyacheslav Dikonov).
Plugin authors may want to add the new entries to their I18N texts and contact
the translators to have their texts translated. Note that there are now 17
different OSD languages, so please make sure you have 17 versions for each of
your texts.
- Some corrections and additions to the Finnish OSD texts (thanks to Rolf
Ahrenberg and Niko Tarnanen).
- Fixed a wrong 'delta' value in the call to the shutdown script (thanks to
Stephan Epstein for reporting this one).
- Activated detection of radio channels (to avoid reports about "channels not
being detected that used to be detected with the 'scan' utility or the
original 'autopid' patch ;-).
- Channels with a zero VPID no longer write a PPID into channels.conf.
- Short channel names are now only stored if they actually differ from the
full name.
- The EPG scan now scans newly found transponders together with already existing
ones.
- The "Red" button in the "Setup/EPG" menu can now be used to force an EPG
scan on a single DVB card system (see MANUAL for details).
- The new SVDRP command 'SCAN' can be used to force an EPG scan on a single
DVB card system (see MANUAL under Setup/EPG for details).
- Fixed handling PID changes in 'Transfer Mode'.
- Excess blanks in channel names read from the SDT are now removed.
- Fixed wrong parameter settings when scanning NITs for terrestrial transponders
(thanks to Christian Tramnitz for pointing out this one).
- Fixed some out of bounds parameter settings when scanning NITs for cable
and satellite transponders.
- Added 'libsi' include files to the 'include' directory, so that plugins can
use them (thanks to Marcel Wiesweg).
- Now only processing NITs that contain the transponder they are actually
broadcast on.
- Fixed setting the source type for newly detected terrestrial transponders
(thanks to Christian Tramnitz for his support in debugging this).
|
|
- Fixed a lockup in the EPG scanner when no non-primary device was available
(thanks to Martin Holst for reporting this one).
- Fixed a compiler warning about virtual cConfig::Load() functions (thanks to
Lauri Tischler for reporting this one).
- Fixed a warning about character comparison in libsi/si.c (thanks to Lauri
Tischler for reporting this one).
- The new parameter "Update channels" in the "Setup/DVB" menu can be used to
control if and how channels will be automatically updated (see MANUAL).
This has already been part of the 'autopid' patch by Andreas Schultz and has
now been adopted.
- Fixed a crash in case there is no DVB hardware present (thanks to Sascha
Volkenandt for reporting this one).
- Changed calculation of channel ids to make it work for tv stations that use
the undefined NID value 0 (thanks to Teemu Rantanen for reporting this one).
- Enhanced the SDT filter to handle multi part sections.
- Added support for selecting preferred EPG languages (based upon a patch by
Teemu Rantanen).
- Fixed a 'const' in libsi/si.h (thanks to Marcel Wiesweg).
- Fixed the 'su' call in 'runvdr' to make it work on systems that require the
user name to appear before the command option (thanks to Robert Huitl).
- Fixed testing for matching section filters in case they are turned off (thanks
to Marcel Wiesweg).
- In case of incomplete sections an error message is now logged only every 10
seconds.
- Fixed a possible NULL pointer access in cEITScanner::Process() (thanks to
Andreas Kool).
- The actual transponder data is now taken from the NIT and existing channels
are adjusted if necessary. If the NIT contains new transponders, they are
scanned for channels during the next EPG scan. Note that only the satellite
branches are tested, cable and terrestrial need to be tested by somebody who
actually has such equipment.
|
|
- Changed thread handling to make it work with NPTL ("Native Posix Thread Library").
Thanks to Jon Burgess, Andreas Schultz, Werner Fink and Stefan Huelswitt.
- The cThread class now accepts a 'Description' parameter, which is used to log
the beginning and end of the thread, together with its process and thread id.
For descriptions that need additional parameters you can use the function
cThread::SetDescription(), which accepts 'printf()' like arguments.
Existing plugins that use threads should be changed to use this functionality
instead of explicit 'dsyslog()' calls inside their Action() function in order
to support logging the thread ids.
- Added "Slovak Link" and "Czech Link" to 'ca.conf' (thanks to Emil Petersky).
However, 'ca.conf' is now pretty much obsolete due to the automatic CA handling.
- Mutexes are now created with PTHREAD_MUTEX_ERRORCHECK_NP, which makes the
'lockingTid' stuff obsolete (thanks to Stefan Huelswitt).
- Changed font handling to allow language specific character sets.
- Adopted the small font character set from the "Elchi" patch (originally
provided by Alessio Sangalli).
- Greek language texts now use iso8859-7 character set (thanks to Dimitrios
Dimitrakos).
- Rearranged section data handling, so that the actual data handling can be done
separately, even from within plugins.
- The EPG data structures have been moved from eit.[hc] to epg.[hc] and have been
adapted to the general VDR coding style. Plugins that use these data structures
may need to change some function names (which should be obvious).
The name 'subtitle' has been changed to 'shortText' to avoid clashes with actual
subtitles that are part of a movie. The name 'extendedDescription' has been
shortened to 'description'.
- Replaced 'libdtv' with 'libsi' (thanks to Marcel Wiesweg), which is thread
safe and can be used by multiple section filters simultaneously.
- Added 'cRwLock' to 'thread.[hc]'. Note that all plugin Makefiles need to
define _GNU_SOURCE for this to work (see the example plugin Makefiles and
'newplugin').
- Fixed a problem with crc32 in SI handling on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Fixed an alignment problem in CAM access on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Added 'StreamType' setting to CAM communication, which is important for
Aston/SECA CAMs (thanks to Antonino Sergi).
- Now the CA descriptors are sent to the CAM in the 'program' or 'ES level'
sections, depending on where they are found in the PMT (thanks to Hans-Peter
Raschke for reporting this one). This should make SkyCrypt CAMs work.
- Now using the 'version number' of EPG events to avoid unnecessary work.
- Channel data is now automatically derived from the DVB data stream (inspired
by the 'autopid' patch from Andreas Schultz).
- The current channel is now automatically re-tuned if the PIDs or other settings
change. If a recording is going on on a channel that has a change in its
settings, the recording will be stopped and immediately restarted to use the
new channel settings.
- EPG events now use the complete channel ID with NID, TID and SID.
- Channel names in 'channels.conf' can now have a short form, as provided
by some tv stations (see man vdr(5)). Currently channels that provide short
names in addition to long ones are listed in the OSD as "short,long name",
as in "RTL,RTL Television". The short names will be used explicitly later.
- The Ca parameter in 'channels.conf' has been extended and now contains all the
CA system ids for the given channel. When switching to a channel VDR now tests
for a device that provides one of these CA system ids. The devices automatically
get their supported ids from the CI handler.
- The values in 'ca.conf' are currently without any real meaning. Whether or not
a channel with conditional access can be received is now determined automatically
by evaluating its CA descriptors and comparing them to the CA system ids
provided by the installed CAM. Only the special values 1-16 are used to assign
a channel to a particular device.
- Increased the maximum number of possible OSD colors to 256.
- Limited the line length in the EPG bugfix report, which appears to fix a buffer
overflow that caused a crash when cleaning up the EPG data (at 05:00 in the
morning).
|
|
- Fixed dropping out of replay mode while viewing a recording that is still
going on (thanks to Oliver Endriss for reporting and helping to debug this
one).
- Fixed handling ':' characters in channel names when reading channels.conf
(thanks to Reinhard Nissl for reporting this one).
- Fixed the URL to the 'Doxygen' tool in INSTALL (thanks to Dirk Essl).
- Removed the obsolete chapter "Stopping a recording on the primary DVB interface"
from MANUAL.
- Completed Dutch language texts (thanks to Hans Dingemans).
- Made 'diseqc.conf' a required file only if Setup.DiSEqC is activated (thanks to
Thomas Schmidt).
- VDR now starts up even if 'keymacros.conf' references a plugin that is currently
not loaded (suggested by Alexander Wetzel).
- Fixed checking for VIDEO_STREAM_S in cRemux::SetBrokenLink() (thanks to Oliver
Endriss).
- Added 'repeat' function to keys '7' and '9' ("jump to mark") in replay mode
(suggested by Oliver Endriss).
- Made cOsdMenu::Display() virtual, which allows plugins to do some additional
processing after calling the base class function (suggested by Jan Rieger).
- Updated 'ca.conf' (thanks to Marco Franceschetti).
|
|
- Now explicitly handling exit value 0 and 2 in 'runvdr'.
- Added a missing 'w' to the allowed characters for Finnish and Swedish (thanks
to Lauri Tischler and Ragnar Sundblad).
- Added channels for DVB-T Hannover (Germany) to channels.cont.terr (thanks to
Peter Waechtler).
- Fixed a hangup in SVDRP when the client disappears without sending QUIT (thanks
to Robert Bartl for reporting this one). The problem was introduced in version
1.2.2 through the fix for an occasional "Broken pipe" error in SVDRP connections.
- Updated 'channels.conf.terr' for Berlin.
- Fixed displaying still pictures, now using the driver's VIDEO_STILLPICTURE call
directly (thanks to Oliver Endriss). This also improves navigating through DVD
menus with the DVD plugin. If this causes problems with your particular system
(maybe because you are using the 'analogtv' plugin) you can reactivate the
previous behaviour by commenting out the line
#define VIDEO_STILLPICTURE_WORKS_WITH_VDR_FRAMES
in VDR/dvbdevice.c.
Note that you need driver version 2003-08-23 or later for this to work!
- Fixed handling extra blanks in plugin command lines.
- Actually implemented the SVDRP command DELC.
- Now clearing the player device if there are too many poll timeouts in 'Transfer
Mode', which avoids buffer overflows and black screens in such cases.
|
|
- Fixed 'runvdr' to stay in the loop only if VDR returns an exit status of '1'.
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Empty values in setup.conf are no longer treated as an error (thanks to Andreas
Kool for reporting this one).
- Added a note about the config files of plugins to INSTALL (thanks to Thomas
Keil).
- VDR now continues to start up, even if there is an error in setup.conf.
- Fixed a bug in resetting OSD color palettes (thanks to Torsten Herz).
- Fixed starting a recording on the primary device if there is a replay session
active (thanks to Javier Marcet for reporting this one).
- Avoiding an unnecessary stop of an ongoing Transfer Mode when starting a
recording on the primary device.
|
|
- Fixed the TS to PES repacker so that it works with MPEG1 streams (thanks to
Andreas Kool).
- Fixed keeping track of the current channel number when moving channels in
the "Channels" menu (thanks to Mirko Günther for reporting this one).
- Made the plugin library directory configurable via Make.config (thanks to
Ludwig Nussel).
- Fixed scaling SPU bitmaps in Letterbox mode when playing NTSC material.
In order to do this, the cDevice was given a new member function GetVideoSystem().
- Fixed two warnings when compiling with gcc 3.3.1 (thanks to Alfred Zastrow for
reporting this).
- Made crc32() a static function in libdtv/libsi/si_parser.c to avoid a name clash
when using other libraries that also implement a function by that name (thanks
to Reinhard Nissl for reporting this one).
- Fixed staying off the end of an ongoing recording while replaying in time shift
mode (thanks to Rainer Zocholl for reporting this one).
- VDR now stops with exit status 2 if one of the configuration files can't be
read correctly at program startup (suggested by Rainer Zocholl).
- Fixed a crash when starting "Pause live video" twice within the same minute on
the same channel.
- Fixed freezing replay if a timer starts while in Transfer Mode from the device
used by the timer, and the timer needs a different transponder (thanks to
Richard Robson for reporting this one).
- Fixed toggling channels with the '0' key (thanks to Mirko Günther for reporting
this one).
- Made the "Zap timeout" (the time until a channel counts as "previous" for
switching with '0') a setup variable, available in "Setup/Miscellaneous"
(suggested by Helmut Auer).
- Removing deleted recordings faster than normal when cutting, to avoid running
out of disk space (thanks to Manfred Schmidt-Voigt for reporting this one).
|
|
- Fixed a bug in channel switching after Left/Right has been pressed (thanks to
Michael Walle for reporting this one).
- Improved channel switching in case of numerical input by switching as soon as
the channel is unique (suggested by Jaakko Hyvätti).
- Fixed creating a new channel in the "Channels" menu in case the 'channels.conf'
contains ':@nnn' lines with no text (thanks to Guy Roussin for reporting this
one).
- Changed the behaviour of the '0' key in normal viewing mode so that a channel
only qualifies as "previous" if it has been selected for at least 3 seconds
(suggested by Thomas Keil).
- Now clearing the channel info display when entering numeric keys to switch
channels (suggested by Guy Roussin).
- Added missing I18N entry for "Ppid" (thanks to Rolf Ahrenberg).
- Fixed handling the color buttons in the "Edit channel" menu (thanks to Thomas
Keil for reporting this one).
- Fixed an occasional "Broken pipe" error in SVDRP connections (thanks to Gerhard
Steiner for reporting this one).
- Fixed checking CA capabilities with the dvb-kernel driver (thanks to Kenneth
Aafløy).
- Fixed selecting the device, because sometimes an FTA recording terminated a
CA recording (thanks to Emil Naepflein).
- Fixed a possible crash in case a VFAT file system is used without compiling VDR
with VFAT=1 (thanks to Ernst Fürst for reporting this one).
- Now the program uses the values of VIDEODIR and PLUGINDIR defined in Makefile
or Make.config as defaults (thanks to Steffen Barszus).
- Added the usual menu timeout to the CAM menus.
|
|
- Fixed OSD access in case none of the devices provides one (thanks to Axel
Gruber for reporting this one).
- Fixed editing channels ('timers.conf' was not written after a channel has
been modified, which could result in errors upon the next start of VDR).
- Fixed a crash when canceling a newly created timer (thanks to Thomas Schmidt
for reporting this one).
- Completed Hungarian language texts (thanks to Istvan Koenigsberger and Guido
Josten).
- Fixed device handling in the CICAM menu in case a VDR instance was started
with a specific device using the -D option (thanks to Gerald Raaf for reporting
ths one).
- Initializing the current channel to '1' to avoid a crash in creating a new
timer in case there is no device in the system that can actually receive any
channel (thanks to Malcolm Caldwell for reporting this one).
- Some corrections to the Finnish OSD texts (thanks to Niko Tarnanen and Rolf
Ahrenberg).
|
|
- Completed Greek language texts (thanks to Dimitrios Dimitrakos).
- Completed Polish language texts (thanks to Michael Rakowski).
- Added a note about NPTL ("Native Posix Thread Library") to the INSTALL file
(thanks to Jon Burgess for pointing this out).
- Some corrections to the Finnish OSD texts (thanks to Jaakko Hyvätti).
- Officially released as version 1.2.0.
|
|
- Some corrections to the French OSD texts (thanks to Olivier Jacques).
- Fixed some missing commas in i18n.c (thanks to Dimitrios Dimitrakos for
reporting this problem).
- Some corrections to the Finnish OSD texts (thanks to Niko Tarnanen and Rolf
Ahrenberg).
- Completed the Italian OSD texts (thanks to Antonio Ospite).
- Fixed breaking off replay in case the user hits "Play" or "Pause" too soon after
going into "Pause live video" mode (thanks to Karim Afifi for reporting ths one).
- Some corrections to the Catalanian OSD texts (thanks to Jordi Vilà ).
- Single event timers are now deleted if the recording they are doing is
deleted before the timer ends.
- Fixed an uninitialized variable in cDisplayChannel (thanks to Stefan Huelswitt).
- Fixed a possible access of invalid file handles in cSIProcessor::Action()
(thanks to Stefan Huelswitt).
|
|
- Modified handling of audio packets in cDvbPlayer for better sync with external
AC3 replay (thanks to Werner Fink).
- Fixed a memory leak in cNonBlockingFileReader (thanks to Stefan Huelswitt).
- Completed the French OSD texts (thanks to Gregoire Favre).
- Completed the Finnish OSD texts (thanks to Niko Tarnanen and Rolf Ahrenberg).
- Fixed I/O handling in case an explicit controlling terminal is given (thanks
to Oliver Endriss).
- Fixed resume file handling in case the resume.vdr file can't be written
(thanks to Gerhard Steiner).
- Fixed cutting a recording if there is only a single editing mark (thanks to
Ralf Klueber for reporting this one).
- Fixed volume display in case a plugin has its own OSD open (thanks to Marcel
Wiesweg).
- Fixed channel switching in the EPG scanner on single device systems.
- Completed the Swedish OSD texts (thanks to Tomas Prybil).
- Now switching to the channel used by the most recently started timer in case
the original current channel becomes unavailable due to a recording on a
different transponder. If this fails, a channel up/down switch is attempted as
a fallback solution (thanks to Lauri Tischler for reporting this one, and to
Hermann Gausterer for suggesting to switch to the recording channel).
- Fixed cReplayControl::Show() to avoid a compiler warning in g++ 3.2.3 (thanks
to Jan Ekholm for reporting this one).
- Completed the Slovenian OSD texts (thanks to Matjaz Thaler).
- Changed the DEFAULTPRIORITY in device.c to -1, so that the primary device
will be used for FTA recordings in case the CAM is connected to a non-primary
device (thanks to Reinhard Walter Buchner for reporting this one).
- The cCiHandler now closes its file handle when it gets destroyed.
- Checking for duplicate recordings with the same file name and disabling the
second timer (thanks to Peter Bieringer for reporting this one).
- Fixed handling newly created timers in case they are not confirmed with "Ok"
(thanks to Gerhard Steiner for reporting this one).
- It is now possible to directly delete a timer that is currently recording
(thanks to Alexander Damhuis for reporting this one).
|
|
- Removed a faulty parameter initialization in menu.c (thanks to Lauri Tischler for
reporting this one).
- Re-implemented the WaitForPut/WaitForGet stuff in cRingBuffer, since some plugins
actually need this. By default the buffer does not wait; if a plugin needs the
waiting functionality it can call the new SetTimeouts() function.
- Moved the call to cPlugin::Start() further up in vdr.c, to make sure it gets
called before trying to learn the keys (problem reported by Oliver Endriss).
- No longer starting the editing process if no marks have been set (thanks to
Matthias Raus for reporting this one).
- Added Catalanian language texts (thanks to Marc Rovira Vall and Ramon Roca).
Plugin authors may want to add the new entries to their I18N texts and contact
the translators to have their texts translated. Note that there are now 16
different OSD languages, so please make sure you have 16 versions for each of
your texts.
- Moved the detection of a broken video data stream from the cDevice into the
cRecorder to avoid problems with cReceivers that want to receive from PIDs
that are currently not transmitting (thanks to Marcel Wiesweg for reporting
this one).
- Fixed setting the locking pid after a timed wait (thanks to Andreas Schultz).
- Avoiding spurious section filter settings after a channel switch.
- Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt).
- Fixed reading 'epg.data' for channels with non-zero RID (thanks to Oliver
Endriss for reporting this one).
- Fixed EPG bugfix statistics to avoid log entires for undefined channels (thanks
to Lars Bläser for reporting this one).
- No longer waiting inside cIndexFile::CatchUp() to avoid shortly blocking replay
at the end of a recording.
|
|
- Introduced the new function cPlugin::Initialize(), in order to be able to separate
the startup of a plugin into an "early" (Initialize()) and "late" (Start()) phase
(suggested by Andreas Schultz). Plugin authors should please read the section
about "Getting started" in PLUGINS.html and adapt their code if applicable.
- Implemented the CableDeliverySystemDescriptor and TerrestrialDeliverySystemDescriptor
in libdtv (thanks to Sven Grothklags and Andreas Schultz).
- Fixed keeping live video active in case the primary device doesn't have an MPEG
decoder (thanks to Wolfgang Goeller for reporting this one).
- Implemented cDevice::ActualDevice(), which returns the actual receiving device in
case of 'Transfer Mode', or the primary device otherwise. This may be useful for
plugins that want to attach a cReceiver to the device where the current live video
is actually coming from.
- Added VDRVERSNUM to config.h, which can be used by the preprocessor to check the
actual VDR version (suggested by Stefan Huelswitt).
- Removed the WaitForPut/WaitForGet stuff from cRingBuffer, since it appears to
no longer be necessary due to the implementation of cNonBlockingFileReader in
dvbplayer.c. Also, the long timeout in WaitForPut caused problems with cReceivers
that use a ring buffer and didn't immediately return from their Receive() function
if the buffer runs full (thanks to Sascha Volkenandt for reporting this one).
- Fixed handling EPG data where the "extended event descriptor" comes before the
"short event" or a "time shifted event" (thanks to Jonan Santiago).
- Disabled the "Received stuffing section in EIT" log message.
- Updated 'channels.conf.terr' for Berlin (thanks to Juri Haberland).
- Avoiding short display of the "Main" menu when pressing the "Recordings" button
or the "Back" button during replay.
- Further increased the timeout until an index file is considerd no longer to be
written.
- Implemented separate PausePriority and PauseLifetime parameters for the recordings
created when pausing live video (suggested by Alfred Zastrow).
- Changed C++ style comments in libdtv into C style to avoid warnings in gcc 3.x
(thanks to Andreas Schultz).
|
|
- Fixed minimum lifespan of deleted recordings (thanks to Jaakko Hyvätti).
- Updated French OSD texts (thanks to Olivier Jacques).
- Fixed paging through lists with repeated Left/Right keys.
- Fixed setting the PCR-PID in case it is equal to one of the other PIDs (thanks
to Oliver Endriss for reporting this one).
- Fixed double call to MainMenuAction() of a plugin if invoked via a hotkey (thanks
to Kai Moeller for reporting this one).
- Fixed handling dedicated keys.
- Now turning off live PIDs when replaying. This avoids short spikes from other
channels when switching between Transfer Mode channels, and also lets an ongoing
replay continue even if a recording is started on the primary device.
- The RCU channel display no longer changes when a recording on a different
channel starts on the primary device.
- Restoring the current channel in case a recording has switched the transponder.
If all devices are busy and none of them can provide the current channel, the
message "Channel not available!" will be displayed.
- Removed the (no longer necessary) 'panic' stuff from cThread.
- Added cStatus::OsdItem() to provide the entire list of menu items to a plugin
(thanks to Carsten Siebholz).
- The red ("Record") and yellow ("Pause") button in the "Main" menu are no longer
available when replaying.
|
|
- Using masks in EIT filtering to reduce the number of filters (thanks to Andreas
Schultz).
- Fixed handling Ca descriptors (thanks to Stefan Huelswitt).
- Now only those Ca descriptors are sent to a CAM that are actually understood
by that CAM.
- Re-enabled CAM communication during replay and on non-Ca channels. This requires
a DVB driver with firmware version 2613 or later.
- It is now possible to do simultaneous recording and replay with a single DVB
card, even with encrypted channels. This requires the use of the Link Layer
firmware, version 2613 or higher; the -icam firmware is still limited to live
encrypted channels only. Finally we have time shift for encrypted channels on
single card systems!
- Enhanced detection of pending user I/O from CAMs to avoid sluggish reaction
to remote control keypresses.
- Implemented "pause live video". You can now press "Menu/Yellow" or "Pause" on
your remote control while watching live video to start an instant recording
of the current programme and immediately start replaying that recording.
|
|
- The CAM is now accessed only if the current channel actually has a non-zero Ca
value, and CAM access is completely suppressed during replay, which avoids
problems in case the CAM is attached to the primary DVB device.
- The "Left" and "Right" buttons now set the cursor to the first or last list item
even if the list consist only of a single page, like, for instance, the Main menu
(thanks to Oliver Endriss).
- Made the log message "OSD window width must be a multiple of 4..." a debug message
instead of an error message, so it can be avoided by using a log level less than 3.
- Updated Greek language texts (thanks to Dimitrios Dimitrakos).
- Fixed faulty behaviour of the "Mute" key in case the channel display is visible
(thanks to Florian Bartels for reporting this one and Sascha Volkenandt for
helping to fix it).
- Modified LOF handling to allow for C-band reception (thanks to Malcolm Caldwell).
- Added some missing cAudio handling calls (thanks to Werner Fink).
- Replaced the 'for' loops in StripAudioPackets() with memset() calls (thanks to
Werner Fink).
- Further increased the timeout until an index file is considerd no longer to be
written.
- Fixed a crash in case the index file can't be accessed any more during replay
(thanks to Stefan Huelswitt for reporting this one).
- Fixed displaying messages in the status line in case they exceed the OSD width
(thanks to Gerhard Steiner for reporting this one).
- Avoiding high CPU load in case the connection to LIRC gets lost (thanks to
Ludwig Nussel).
- Fixed handling repeat function with LIRC (thanks to Ludwig Nussel).
- Fixed handling min/max borders when entering integer values (thanks to Andy
Grobb for reporting this one).
- Implemented a "resume ID" which allows several users to each have their own
resume.vdr files (thanks to Martin Hammerschmid). This parameter can be set in
the "Setup/Replay" menu (see MANUAL for details).
- Now using 'libdtv' version 0.0.5 (thanks to Rolf Hakenes for the new version
and Stefan Huelswitt for adapting VDR to it).
- If no device with an MPEG decoder can be found at startup, the first device
is now used as primary device (just to have some device).
- Adjusted some Premiere channels in 'channels.conf' (thanks to Thomas Koch).
- Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt).
- The 'epg.data' file is now read after all plugins have been started (thanks
to Sascha Volkenandt).
- The LIRC remote control no longer tries to learn keys if it can't connect to
the LIRC daemon (thanks to Ludwig Nussel for reporting this one). The same
applies to the RCU remote control in case of errors during startup.
- Fixed handling of Ca parameters with values <= MAXDEVICES, which don't indicate
an actual encrypted channel (thanks to Stefan Huelswitt for reporting this one).
|
|
- Added 'Hrvatska radiotelevizija' and 'RTV Slovenija' to ca.conf (thanks to
Paul Gohn).
- Implemented actual user input for CAM enquiry menus.
- Since disk file systems apparently don't honor the O_NONBLOCK flag to read from
a file in non-blocking mode the cDvbPlayer now uses a non blocking file reader
class to make sure replay remains smooth even under heavy system load.
- Increased the maximum possible packet size in remux.c to avoid corrupted streams
with broadcasters that send extremely large PES packets (thanks to Teemu Rantanen).
- Added TS error checking to remux.c (thanks to Teemu Rantanen).
- Modified cRingBufferLinear to avoid excessive memmove() calls in 'Transfer Mode'
and during recordings, which dramatically reduces CPU load. Thanks to Teemu
Rantanen for pinpointing the problem with the excessive memmove() calls.
- Updated 'channels.conf' (thanks to Achim Lange).
- Added/improved Swedish language texts (thanks to Jan Ekholm).
- Fixed the description of the "Scroll pages" OSD setup parameter ('yes' and 'no'
were mixed up).
- Fixed handling the LOG_LOCALn parameters in the -l option (thanks to Dimitrios
Dimitrakos).
- Changed EIT processing to always read a full section.
- Fixed handling user defined CFLAGS in libdtv/libvdr/Makefile (thanks to Clemens
Kirchgatterer and Robert Schiele).
- Fixed skipping unavailable channels in the EPG scanner.
|
|
- Fixed the 'channels.conf' entries for "Studio Universal" and "Disney Channel".
- Fixed handling channels in the "Channels" menu in case there are ':@nnn' group
separators without names (thanks to Guy Roussin for reporting this one).
- The SVDRP command CHAN now also accepts channel IDs.
- Increased the timeout until an index file is considerd no longer to be written
(sometimes in time shift with heavy system load the index file was closed too
early by the replay thread).
- Implemented "Link Layer" based CAM support, which hopefully will solve the
problems with CAMs we had in the past. To use this you need the driver version
2002-01-08 or higher (with the new firmware supporting the "Link Layer" protocol).
- Added an EPG bugfix that moves the Subtitle data to the Extended Description in
case the latter is empty and the Subtitle exceeds some useful length.
- Since several channels put very long strings into the Subtitle part of their
EPG data, that string is now limited in length when used in a recording's
file name.
|
|
- Fixed saving the polarization parameter of channels that have a number in the
'source' parameter (thanks to Peter Seyringer for reporting this one).
- Updated 'channels.conf.terr' (thanks to Andy Carter).
- Updated 'channels.conf.cable' (thanks to Achim Lange).
- First step towards a "unique channel ID". The channel ID is a human readable
string, made up from several parameters of the channel's definition in the file
'channels.conf' (see man vdr(5) for details).
In order for the "unique channel ID" to work, all channel definitions now must
be unique with respect to the combination of their Source, Frequency and SID
parameters. You may have to fix your 'channels.conf' manually if there are error
messages in the log file when loading it. BE SURE TO MAKE A BACKUP COPY OF YOUR
'channels.conf' AND 'timers.conf' FILE BEFORE SWITCHING TO THIS VERSION, AND CHECK
VERY CAREFULLY WHETHER YOUR TIMERS ARE STILL SET TO THE RIGHT CHANNELS!
When reading an existing 'timers.conf', the channels will be identified as before
by their numbers. As soon as this file is written back, the channel numbers will
be replaced by the channel IDs. After that it is possible to manually edit the
'channels.conf' file and rearrange the channels without breaking the timers.
Note that you can still define new timers manually by using the channel number.
VDR will correctly identify the 'channel' parameter in a timer definition and
use it as a channel number or a channel ID, respectively. Also, the SVDRP commands
that return timer definitions will list them with channel numbers in order to
stay compatible with existing applications.
The channel ID is also used in the 'epg.data' file to allow EPG information from
different sources to be stored, which would previously have been mixed up in case
they were using the same 'service ID'. Note that the contents of an existing
'epg.data' file from a previous version will be silently ignored, since it doesn't
contain the new channel IDs. When inserting EPG data into VDR via SVDRP you now also
need to use the channel IDs.
Currently the EPG data received from the DVB data stream only uses the 'Source'
and 'Service ID' part of the channel ID. This makes it work for channels with
the same service IDs on different sources (like satellites, cable or terrestrial).
However, it doesn't work yet if the service IDs are not unique within a specific
source. This will be fixed later.
- Added missing SID parameters to 'channels.conf'. Some channels have been removed
since they are apparently no longer broadcasted.
- Removed dropping EPG events from "other" streams that have a duration of 86400
seconds or more (was introduced in version 1.1.10). This has become obsolete by
the modification in version 1.1.13, which fixed fetching the current/next information
to handle cases where the duration of an event is set wrongly and would last beyond
the start time of the next event. Besides, the change in 1.1.10 broke handling EPG
data for NVOD channels.
- Fixed a compiler warning regarding cMenuChannels::Del() and MenuTimers::Del() hiding
the base class virtual functions.
|
|
- Fixed some faulty default parameter initializations (thanks to Robert Schiele).
- Added further satellites to 'sources.conf' (thanks to Reinhard Walter Buchner
and Oliver Endriss).
- Updated Finnish OSD texts (thanks to Jaakko Hyvätti).
- Fixed a small glitch when switching channels (thanks to Dennis Noordsij for
reporting this one).
- Fixed handling multiple 'CaCaps' entries in 'setup.conf'.
- Group separators in 'channels.conf' may now be given like ':@201 My Channels',
where '@201' indicates the number to be given to the next channel. This can be
used to create 'gaps' in the channel numbering (see 'man 5 vdr'). BE CAREFUL
TO UPDATE YOUR 'timers.conf' ACCORDINGLY IF INSERTING THIS NEW FEATURE INTO YOUR
'channels.conf' FILE!
- Timers now internally have a pointer to their channel (this is necessary to
handle gaps in channel numbers, and in preparation for unique channel ids).
- Fixed slow reaction on SVDRP input (thanks to Guido Fiala for reporting this one).
- Added KI.KA to channels.conf.cable (thanks to Robert Schiele).
- Frequency values for cable and terrestrial channels in 'channels.conf' can
now be given either in MHz, kHz or Hz. The actual value given will be multiplied
by 1000 until it is larger than 1000000.
- Fixed skipping unavailable channels when zapping downwards.
- Fixed checking the Ca() status of a cDevice (thanks to Stefan Huelswitt).
- Fixed switching audio tracks in 'Transfer Mode' on the primary DVB device
(thanks to Steffen Barszus and Stefan Huelswitt for reporting this one and
helping to fix it).
- Fixed channel switching in case of an active 'Transfer Mode' on the primary
device ('Transfer Mode' is now launched with priority '-1').
- Fixed a ternary expression in dvbspu.c.
- Fixed handling 'Transfer Mode' on single device systems when recording an
encrypted channel (thanks to Stefan Huelswitt).
- Fixed blocking replaying in case an encrypted channel is being recorded on
the primary device.
- Now the name of the remote control is displayed when learning the keys.
- Fixed learning remote control keys in case there is more than one remote
control (thanks to Oliver Endriss for reporting this one).
- Implemented additional dedicated keys for "Play", "Pause", "Stop", "Record",
"FastFwd", "FastRew", "Channel+" and "Channel-". If your remote control supports
any of these keys you can delete your 'remote.conf' file and restart VDR to
go through the key learning procedure again in order to assign these new keys.
See MANUAL for more information.
Authors of player plugins should update their ProcessKey() functions so that
the new player keys have the same functionality as the "Up", "Down", "Left",
"Right" and "Blue" keys, respectively. Note that the existing functionality
of these keys should by all means be retained, since VDR (and any plugins)
shall be fully usable with just the basic set of keys. These new keys are only
for additional comfort in case the remote control in use supports them.
- Implemented new keys to directly access the VDR main menu functions "Schedule",
"Channels", "Timers", "Recordings", "Setup" and "Commands". If your remote
control provides keys you want to assign these functions to, you can delete
your 'remote.cof' file and restart VDR to go through the key learning procedure
again in order to assign these new keys. See MANUAL for more information.
- The new configuration file 'keymacros.conf' can be used to assign macros to
the color buttons in normal viewing mode, as well as to up to 9 user defined
keys. See MANUAL and man vdr(5) for more information. The default 'keymacros.conf'
implements the functionality of the "color button patch".
- Fixed a crash when learning the keys of several remote controls and pressing
buttons of those that have already been learned (thanks to Oliver Endriss for
reporting this one).
|
|
- Added cDevice::DeviceNumber() to get the number of a device, not counting any
gaps that might be in the index count.
- Fixed fetching the current/next information to handle cases where the duration
of an event is set wrongly and would last beyond the start time of the next
event.
- Adapted type names to the new HEAD version of the driver (which the previous
NEWSTRUCT branch has been merged into). Note that to use this driver version
you still need to add NEWSTRUCT=1 to the make call when building VDR. You
need a HEAD version of the LinuxDVB driver dated 2002-10-11 or later to compile
VDR with NEWSTRUCT=1.
- Fixed radio channels in channels.conf.cable (thanks to Robert Schiele and Uwe
Scheffler).
- Fixed switching the video format in the Setup/DVB menu (thanks to Uwe Scheffler
for reporting this one).
- Reactivated full handling of second audio PID (even in 'Transfer Mode').
- Fixed a crash when closing down with remote control plugins (thanks to Oliver
Endriss helping to debug this one).
- Commands in the file 'commands.conf' can now have a '?' at the end of their
title, which will result in a confirmation prompt before executing the
command.
- Changed a few leftover 'new char[...]' to MALLOC(char, ...).
- If a command executed from the "Commands" menu doesn't return any output, the
OSD will now be closed automatically.
- The SVDRP command PUTE now triggers an immediate write of the 'epg.data' file
(suggested by Gerhard Steiner).
- The new configuration file 'reccmds.conf' can be used to define commands that
shall be executed from the "Recordings" menu; see MANUAL and 'man vdr(5)' for
details (suggested by Gerhard Steiner).
|
|
- Fixed a missing Flush() call in the remote control learning procedure (thanks
to Oliver Endriss).
- Modified channel handling to cover all parameters necessary for DVB-C and DVB-T
(see man vdr(5) for the meaning of the additional parameters stored in the field
previously named 'polarisation'). Thanks to Uwe Scheffler and Andy Carter for testing.
If you have a system with different kinds of DVB cards, like DVB-T and DVB-C,
for instance, there is no more need to distinguish the channels through the
'Ca' parameter in order to assign them to the various DVB cards. This is now
taken care of by the "source" parameter. So a channel marked as "terrestrial",
for example, will only be received on DVB-T cards.
Note that the cChannel class has been moved into a separate file (channels.[ch]),
and that all data members have been made private and are now only accessible
through member functions. You may have to change any plugin code that accesses
cChannel data accordingly.
- The new configuration file 'sources.conf' contains the various signal sources
(satellites, cable and terrestrial) which are used in 'channels.conf' and
'diseqc.conf' (thanks to Reinhard Walter Buchner for adding some satellites to
'sources.conf' and Oliver Endriss and Lauri Tischler for testing and debugging).
- The 'diseqc' parameter in the channel definitions has been redefined to hold the
"source" of the given channel (which can be either a satellite, cable or terrestrial).
For compatibility with channels.conf files from older versions, numeric values in
this parameter will be tolerated, but they have no meaning. If you want to use
DiSEqC you will need to replace these old values with the proper source identifiers
defined in the new configuration file 'sources.conf'. See how this is done in the
'channels.conf' file that comes with the VDR package.
- The new configuration file 'diseqc.conf' can be used to set up the individual
diseqc configuration (see man vdr(5) for a description of the file format).
- The "Edit channel" menu has a new entry "Source:" in which the source of this
channel can be selected (either a satellite, cable or terrestrial). The set of
parameters at the end of this menu will change according to the type of source.
- The "Use DiSEqC" parameter in the "Setup/LNB" menu has been moved to the beginning
of the list and disables the rest of the parameters when set to "yes", since these
are now only meaningful if DiSEqC is _not_ used.
- Removed some unnecessary #includes from eit.c and changed cMenuRecordings::Del()
to cMenuRecordings::Delete() to avoid warnings in gcc-3.2 (thanks to Andreas
Schultz for pointing this out).
- Improved skipping channels that are (currently) not available (thanks to Stefan
Huelswitt).
- Updated channels.conf.terr and channels.conf.cable (thanks to Uwe Scheffler).
- Fixed a bug when pressing the "Blue" button in the main menu without having
displayed it (thanks to Oliver Endriss for reporting this one).
|
|
- Fixed an incomplete initialization of the filter parameters in eit.c (thanks
to Jeremy Hall).
- Fixed the 'newplugin' script for use with the NEWSTRUCT driver (thanks to
Andreas Schultz for reporting this one). If you have already created a plugin
directory and Makefile with 'newplugin', please apply the following patch to it:
-------------------------------------------------------
--- Makefile 2002/06/10 16:24:06 1.4
+++ Makefile 2002/09/17 15:36:36 1.5
@@ -15,7 +15,12 @@
### The directory environment:
+ifdef NEWSTRUCT
+DVBDIR = ../../../../DVB/include
+DEFINES += -DNEWSTRUCT
+else
DVBDIR = ../../../../DVB/ost/include
+endif
VDRDIR = ../../..
VDRINC = $(VDRDIR)/include
LIBDIR = ../../lib
@@ -34,7 +39,7 @@
INCLUDES = -I$(VDRINC) -I$(DVBDIR)
-DEFINES = -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
+DEFINES += -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
### The object files (add further files here):
-------------------------------------------------------
This is the diff for the 'setup' example that comes with VDR, so your line
numbers may be different.
- Added a missing 'public' keyword in device.h (thanks to Martin Hammerschmid).
- Fixed a race condition when starting 'Transfer Mode'.
- Rearranged the remote control key handling to allow plugins to implement
additional types of remote controls (see PLUGINS.html, section "Remote Control").
The previously used files 'keys.conf' and 'keys-pc.conf' have been replaced
by the file 'remote.conf', which holds the key definitions of all remote controls.
- The LIRC remote control keys are now handled just like the keyboard and RCU keys.
This means that you can use the lircd.conf file as is for your remote control,
without the need of editing it to make the key names the same as used in VDR.
When first starting VDR it will go into the "Learning keys" mode and ask you
to press the various keys. The resulting key assignment will be stored in
the file 'remote.conf'.
Since I have no way of testing the LIRC support, I hope I didn't break it in
the process...
- While learning the remote control keys it is now possible to press the 'Menu'
key to skip the definition of keys that are not available on your particular
RC unit.
- Fixed handling DVD subtitles in the SPU decoder (thanks to Andreas Schultz).
- Avoiding restarts due to 'panic level' when switching channels on the primary
device during EPG scan.
|
|
- Added Hungarian language texts (thanks to Istvan Koenigsberger and Guido Josten).
- Activated cutting.
- Activated 'Transfer Mode'.
- Moved handling of the Menu key entirely into vdr.c.
- Switched VDR's own player to the new cPlayer/cControl structures.
- Switched handling 'Transfer Mode' to the new cPlayer/cControl structures.
- The following limitations apply to this version:
+ The '-a' option (for Dolby Digital audio) doesn't work yet.
+ Switching between different language tracks doesn't work yet.
|
|
- Improved the VDR Makefile to avoid a warning if the '.dependencies' file does
not exist, and also using $(MAKE) to call recursive makes.
- Changed the name of the 'package' target in the plugin Makefiles to 'dist'
(following the suggestions in the "GNU Make" manual). If you already have started
a plugin project, you may want to change this in your Makefile accordingly.
- Improved the plugin Makefile to avoid a warning if the '.dependencies' file does
not exist, and also using $(shell...) to get the version numbers. If you already have
started a plugin project, you may want to change this in your Makefile accordingly.
- Fixed some function headers to make them compile with gcc 3.x (thanks to
Gregoire Favre).
- Fixed the cutting mechanism to make it re-sync in case a frame is larger than the
buffer (thanks to Sven Grothklags).
- Added an error message if the directory specified in the '-L' option can't be
accessed (suggested by Stefan Huelswitt).
- Rearranged OSD class names to make 'cOsd' available for the main OSD interface.
- Completely moved OSD handling out of the cDvbApi class, into the new cOsd.
- Implemented cStatus to allow plugins to set up a status monitor.
See PLUGINS.html for details.
- Moved the cEITScanner out of dvbapi.h/.c, into the new eitscan.h/.c.
- Added Swedish language texts (thanks to Tomas Prybil).
- Fixed parsing 'E' records in epg2html.pl (thanks to Matthias Fechner for pointing
out this one).
- Removed compiler option '-m486' to make it work on non-Intel platforms. If you
have already started a plugin project, you may want to make sure you remove this
option from your existing Makefile.
- Completely rearranged the recording and replay functions to make them available
to plugins.
- Replay is now done in a single thread (no more syncing between input and output
thread necessary).
- It is now possible to record several channels on the same transponder with "budget
cards". VDR automatically attaches a recording timer to a card that already
records on the appropriate transponder. How many parallel recordings can actually
be done depends on the computer's performance. Currently any number of recordings
gets attached to a card, so you should carefully plan your timers to not exceed
the limit. On a K6-II/450 it was possible to record three channels from transponder
12480 with a single WinTV NOVA-S.
- Timers that record two successive shows on the same channel may now overlap and
will use the same DVB card. During the time where both timers record the data
is simply saved to both files.
- The following limitations apply to this version:
+ Transfer mode doesn't work yet.
+ The '-a' option (for Dolby Digital audio) doesn't work yet.
+ Switching between different language tracks doesn't work yet.
+ Cutting doesn't work yet.
|
|
- Changed the cPlugin::Start() function to return a boolean value that indicates
if the plugin will not be able to perform its task (suggested by Stefan Huelswitt).
- Added the cPlugin::Housekeeping() function (suggested by Stefan Huelswitt).
- Updated channels.conf.cable (thanks to Uwe Scheffler).
- Added 'insert' capabilities to cList (suggested by Stefan Huelswitt).
- Changed the 'package' target in the plugin's Makefile to produce a package that
expands to a directory with just the plugin name and version number (suggested
by Stefan Huelswitt).
- Made the config directory available to plugins (suggested by Stefan Huelswitt).
See PLUGINS.html, section "Configuration files" for details.
- Improved the [eid]syslog() macros, so that the LOG_... macros don't need to be
given any more.
|
|
- Separated the actual DVB hardware OSD implementation from the abstract OSD
interface. 'osdbase.c/.h' now implements the abstract OSD, while 'dvbosd.c/.h'
is the actual implementation for the DVB hardware. This is in preparation for
allowing additional kinds of OSD hardware implementations.
- Fixed leftover references to the file FORMATS in MANUAL and svdrp.c.
- Avoiding ambiguities in the cList template class in case one defines a "list of
lists" (thanks to Stefan Huelswitt).
- Simplified the basic cMenuSetupPage class for easier use in plugins.
- Added setup parameters and a Setup menu to the 'hello' plugin example.
- Fixed logging error message for unknown config parameters in plugins.
- Rearranged cleanup sequence at the end of the main program.
- Adapted PLUGINS.html to use the actual code examples from the 'hello' plugin.
|
|
- Begin of the 1.1 development branch. THIS IS NOT A STABLE VERSION!
The current stable version for every day use is still the 1.0 branch.
- First step towards a universal plugin interface. See the file PLUGINS.html
for a detailed description. The man page vdr(1) describes the new options '-L'
and '-P' used to load plugins. This first step implements the complete "outer"
shell for plugins. The "inner" access to VDR data structures will follow.
- The VDR version number is now displayed in the title line of the "Setup" menu.
|
|
- Fixed a problem with wrong EPG data in the Schedules menu (thanks to Tobias
Kerner, problem was initially reported by Michel Moster, but somehow I had
misplaced his message...).
- Added Spanish language texts (thanks to Ruben Nunez Francisco).
- Fixed resetting the "First day" timer parameter once the timer actually starts
recording.
- Fixed the still picture workaround in case the progress display is active
(thanks to Gerald Raaf).
- Fixed a problem with accessing the epg.data file before it is fully written
(thanks to Thilo Wunderlich for reporting this one).
- Now the EPG scan skips channels that have their 'Ca' parameter explicitly set
to an other DVB card (suggested by Sergei Haller).
- Fixed a possible hangup when reading a broken epg.data file (thanks to Henning
Holtschneider for pointing this one out).
- Fixed a bug in the editing process in case a previously edited file with the
same name was manually deleted on a system with more than one video directory
(thanks to Dirk Wiebel for reporting this one).
|
|
- Fixed restoring CICAM setup values for a fourth DVB card (thanks to Klaus Wolf).
- Completed internationalization of OSD texts (thanks to Hannu Savolainen,
Arnold Niessen, Paulo Lopes, Jean-Claude Repetto, Alberto Carraro, Matjaz
Thaler and Truls Slevigen).
- Improved file I/O in case of EINTR, which may occur e.g. with heavy system
load (thanks to Werner Fink).
- Now writing the title of a recording into the 'summary.vdr' file.
- Workaround for displaying still frames with the unpatched LinuxDVB driver
(if anybody ever finds out why the unpatched driver doesn't display VDR's
still frames, please let me know).
- When executing a command from the "Commands" menu, the title of that command
is now immediately shown in the status line (followed by "...") to give the
user some feedback that the command is being executed, which is especially
important if this takes some time.
- Fixed scrolling the "Channels" menu in case the cursor ends up on a group
delimiter (thanks to Bernd Zierath for helping to debug this one).
- Added manual pages vdr(1) and vdr(5) (which made the FORMATS file obsolete).
- New command command line option '-V' to display the VDR version.
- Adjusting column width for channel numbers in case there are more than 999
channels.
- Checking the return value of '...FileRady...' calls in dvbapi.c for better
performance under heavy system load.
- New 'make' target 'install', which copies the manual pages and executables
to their appropriate system locations and creates the /video directory if
it doesn't exist yet.
- Automatic hotkey assignment is now suppressed if the first entry in
commands.conf starts with a digit in the range '1'...'9', followed by a blank.
- Fixed a bug in switching back the replay mode display in time shift mode
(thanks to Achim Lange for reporting this one).
- Fixed a bug in the 'First day' timer parameter for timers that record over
midnight.
- Added units to Setup parameters.
- Changed time entry in the 'Jump' command during replay, so that it is filled
up from right to left.
- Now using statfs() to determine the amount of free disk space, which avoids
the use of an external 'df' command (thanks to Ruben Nunez Francisco).
- Fixed skipping the next hit of a repeating timer (thanks to Rainer Zocholl
for reporting this one).
- Fixed a bug when a timer records over midnight of a day that had a change in
Daylight Saving Time.
- Added Polish language texts (thanks to Michael Rakowski).
- Fixed a bug in parsing group separators in channels.conf (thanks to Henning
Holtschneider for reporting this one).
- Changed the default 'Ok' key when using the PC keyboard from '5' (in the
numeric block) to 'Enter', because the '5' key didn't work on keyboards with
the F-keys on top.
- Fixed a bug in the EPG bugfix mechanism if the extended description is shorter
than 3 characters (thanks to Andreas Schultz).
|
|
- Added 'Ca' code 201 for 'Cryptoworks, GOD-DIGITAL' to 'ca.conf' (thanks to
Bernd Schweikert).
- Fixed avoiding the primary DVB interface in case Setup.PrimaryLimit is 0.
- Fixed handling CICAM settings if the first one of a DVB card was FTA.
- Fixed reacting on changes in CICAM settings (needed to restart VDR before).
- The "Blue" button in the "Main" menu now works as "Stop" button if a recording
is currently being replayed.
- New command line option '-m' to mute audio of the primary DVB device at
startup (suggested by Mirko Günther).
- The new SVDRP command VOLU can be used to control the audio volume (suggested
by Mirko Günther).
- Fixed resetting 'mute' state when setting the volume to a non-zero value.
- Added log messages when deleting recordings in case the disk runs full while
recording.
- Fixed closing a pipe (used for replaying Dolby Digital audio), which
sometimes left 'zombie' processes behind (thanks to Werner Fink for helping
to debug this one).
- Now starting the Dolby Digital output thread only if the recording actually
contains Dolby Digital audio data (thanks to Werner Fink).
- Implemented OSD for Volume and Mute (works only if there is no other OSD
activity, but this should be no problem for normal use).
- Changed the MANUAL description of the "Conditional Access" setup parameters
to reflect the actual "CICAM DVBn m" notation in the "Setup" menu.
- The new Setup parameter "Use time from transponder" can be used to define which
transponder shall be used to set the system time (see MANUAL for details).
If you have been using the SetSystemTime option previously, you now MUST
select a channel that you trust to have a reliable time base.
- Grouped the Setup parameters into several sub-menus, so that each group of
parameters fits on a single screen - unless the height of the OSD has been
set to a small value (based on code from Markus Lang).
- Changed the title of the "Main" menu to "VDR".
- Fixed displaying a system message while the replay mode is being shown.
- Physically removing a deleted recording if one with the same name shall be
deleted again.
- The "Left" and "Right" keys are now used to page up and down in text displays
(like the EPG descriptions or the results of commands executed from the
"Commands" menu).
- Fixed high CPU usage in transfer mode.
- Replaced 'killproc' with 'killall' in 'runvdr', since apparently 'killproc'
is not available by default on some Linux distributions, whereas 'killall' is.
Please check if your system provides 'killall' - if it doesn't, please change
this back in 'runvdr' and report this (thanks to Achim Lange).
- The "Commands" menu now automatically assigns number keys as hotkeys to the
commands. If you have preceeded your commands with digits you may want to
remove these from your 'commands.conf' file.
- The new Setup item "Restart" can be used to force a complete restart of VDR,
including reloading the driver. Note that this can only work if VDR and the
driver are wrapped into a mechanism that actually performs this action if VDR
exits. The 'runvdr' script can be used for this purpose.
- Refined texts of the "Setup" menu.
|
|
- Fixed parsing 'E' records in epg2html.pl.
- Fixed a deadlock when switching channels via Schedule/Now|Next/Switch (reported
by Martin Hammerschmid).
- Changed the meaning of the 'Ca' parameter in 'channels.conf'. Each channel can
now define which decryption method it needs in order to be accessed. The new
configuration file 'ca.conf' contains the defined values, and the default
'channels.conf' has been modifed to contain the new values for 'Premiere World'
and 'ORF'. If you use the default 'channels.conf' and have the conditional
access hardware to receive encrypted channels, please make sure you copy the
file 'ca.conf' into your /video directory (or wherever your configuration files
are located) and go into the "Setup" menu and set the CICAM values according
to your hardware setup. Currently there are two possible CICAM entries per
DVB card, so any card can implement up to two different conditional access
modes (besides the default "Free To Air" mode, which is always assumed to be
available on any DVB card).
- Updated French language texts (thanks to Jean-Claude Repetto).
|
|
- Added scanning for EPG data for another 4 days on channels that support this
(thanks to Oleg Assovski).
- Removed '#define VFAT 1' from recording.c (was a leftover from testing).
- Fixed the "Low disk space!" message (thanks to Sergei Haller).
- Added the TPID to Hessen-3 in 'channels.conf' (thanks to Sergei Haller).
- Fixed a crash when replaying with DEBUG_OSD=1 (thanks to Stefan Huelswitt).
- Implemented the "First day" parameter for repeating timers. See FORMATS for
information about the enhanced 'timers.conf' file format, and MANUAL for
a description of the new item in the "Edit Timer" menu and the enhanced
functionality of the "Blue" button in the "Timers" menu.
- When deleting a recording that is currently still being recorded, the related
timer will now automatically be terminated. If this is a repeating timer, it
will receive a "First day" setting that skips the timer for this day.
- Fixed closing all unused file descriptors when opening a pipe (thanks to
Werner Fink).
- Instant recordings now take the EPG data from the point in time at 5 minutes
from the start time of the recording. In order for this to work the 'active'
parameter of a timer now uses the second bit to indicate that this is an
"instant" recording (see FORMATS for details).
- Fixed the SVDRP GRAB command in case the video device can't be opened (thanks
to Adrian Stabiszewski).
- At startup the data written into 'epg.data' is now read into the EPG data
structures. In order for this to work, the 'E' record has been extended to
(optionally) contain the 'table ID' (see FORMATS for details).
- The new SVDRP command PUTE can be used to put EPG data into the EPG list.
See FORMATS for details about the required data format.
- Taking the German umlauts 'as is' when compiled with VFAT.
- The new Setup parameter RecordDolbyDigital can be used to generally turn off
recording the Dolby Digital audio channels in case you want to save disk space
or don't have the equipment to replay Dolby Digital audio.
- Reading the 'setup.conf' file no longer terminates in case of an error, but
rather attempts to read the rest of the file.
- Removed DVD support from the core VDR source, since the current version from
Andreas Schultz is already much further developed (DVD menu navigation) and
the concept of "additional players" in VDR is going to change in version 1.1.0,
where a new "plugin" interface shall allow the easy implementation of new
players without having to patch the core VDR source. Until then, Andreas has
agreed to provide his DVD support as a completely external patch.
- The contents of the distribution archive now contains the directory name with
the current version number, as in 'vdr-1.0.0pre1/...' in order to avoid
inadvertently overwriting an existing VDR directory with a new version.
- Added a missing error message in SVDRP command LSTC in case the given channel
can't be found.
|
|
- Fixed a bug in moving timers or channels to the last position in the list
(thanks to Matthias Schniedermeyer for helping to debug this one).
- Changed the estimated data rate for calculating the remaining disk capacity
to 25.75 MB/min.
- Only reporting the 'EPG bugfix statistics' if there really were any fixes.
- Added Finnish language texts (thanks to Hannu Savolainen).
- Reverted to the previous way of searching for the EPG record of the current
recording in case of a periodic timer (i.e. taking the one that is in the
middle between start and end time).
- Added a typedef for 'in_addr_t' to make it work with glibc < 2.2 (thanks to
Jürgen Schmidt).
- When the last entry in a "Recordings" menu page is deleted, that page is now
automatically closed (suggested by Uwe Freese).
- Changed the default name for instant recordings to "TITLE EPISODE" (avoiding
the '-').
- If Setup.ShowInfoOnChSwitch is set to "no", the box for the EPG display is no
longer shown (thanks to Andy Grobb).
- If compiled with VFAT=1, characters that can't be handled by a VFAT system are
now encoded to '#XX'.
- When the user presses the "Power" button and there is a timer about to start
recording within Setup.MinEventTimeout minutes, there is now a confirmation
prompt telling the user that there is an upcoming timer event.
- If a recording has no episode title, the trailing '~' is no longer shown in
the progress display.
|
|
- Updated channel settings for 'N24' (thanks to Andreas Gebel).
- Fixed handling hierarchical recordings menu in case of directories starting
with the same sequence of characters.
- Fixed handling timers on the 29th, 30th or 31st of a month in case the next
month has less than 31 days.
- Added a description of the sort order of individual episodes in the
recordings menu to the MANUAL.
- Removed the EPG bugfix for "Title / Subtitle" cleanup. Apparently Pro-7 has
finally stopped this nasty habit.
- Added some EPG bugfix statistics (printed to the log file every time the EPG
data is cleaned up and when VDR is terminated). Maybe somebody in charge of
the EPG data at the listed channels will read this and take the necessary
actions to fix these things...
- Changed the [dei]syslog macros in tools.h to use a variable number of args,
thus making it safe to use them in nested 'if/else' statements.
- Fixed error handling in establishing an SVDRP connection (thanks to Davide
Achilli) for pointing this out).
- The new configuration file 'svdrphosts.conf' is now used to define which
hosts may access the SVDRP port (by default only 'localhost' has access).
See FORMATS for details.
- The special keywords TITLE and EPISODE can now be used in timer file names
(see MANUAL and FORMATS for details).
- The new setup parameter NameInstantRecord can be used to define how an
instant recording will be named (see MANUAL for details).
- When looking for the EPG record of the timer that starts a recording, now
that record is taken which covers the time calculated as
'start + (Setup.MarginStart * 2) + 1)' in order to have a better chance of
hitting the right record in case of an instant recording. Timers that start
further in the future should always be programmed via the "Schedules" menu.
- The special VPIDs '0' and '1' are now used to enable recording radio channels.
Actually '0' should be enough, but '1' must be used with encrypted channels
(driver bug?). Note, though, that since VDR is mainly a *video recorder*, some
features like, e. g., the progress display, may not work as expected with
radio recordings. Thanks to Michael Paar.
- Fixed a problem with the ERR macro defined by ncurses.h (thanks to Artur
Skawina).
|
|
- Fixed setting the OSD size in the 'Confirm' interface call (thanks to
Deti Fliegl).
- Removed the 'read incomplete section...' error message in the EIT processor.
- Fixed channel data for "DW TV" (thanks to Axel Gruber).
- Added DPID to "PREMIERE MOVIE 1" in channels.conf.cable (thanks to Stephan
Schreiber).
- Prepared the OSD functions for multiple overlapping windows.
- Removed the check to see whether the system time is running linearly.
- Improved performance of SVDRP command entry.
- Removed EPGBugfixLevel '3' - after more than a year Pro-7 finally managed to
broadcast the correct timestamps for EPG events between 0:00 and 6:00!
- Fixed failing watchdog timer if program hangs in OSD activities (thanks to
Carsten Koch).
- No longer requiring 'libncurses' if compiling without DEBUG_OSD=1 and
REMOTE=KBD (thanks to Lauri Pesonen).
- The "Recordings" menu now displays a hierarchical structure if there are
subdirectories for the recordings. This can be controlled through the
"RecordingDirs" parameter in the "Setup" menu.
See "MANUAL/Replaying a Recording" for details.
- Improved speed of setting the Help button texts.
- Fixed handling file names that contain single quotes (') or dollar signs ($)
in the call to the shutdown command (option '-s') and the recording command
(option '-r').
- Improved error handling in the editing process; the resulting file will be
deleted if an error occured.
- A message is now prompted at the end of the editing process, indicating
whether the process succeeded or failed.
- Fixed setting the LastActivity timestamp after a shutdown prompt (thanks to
Sergei Haller).
- A message is now prompted if free disk space becomes low during recording.
- The editing process now calls AssertFreeDiskSpace() to remove deleted
recordings if the disk becomes full.
- The "Main" menu now displays in its title the used disk space (in percent)
and the estimated free disk space (in hh:mm), assuming a data rate of 30 MB
per minute.
- Activating the "Recordings" menu now displays "scanning recordings..." to
give the user some feedback in case this takes longer.
- Status messages are now displayed centered.
- Removed the 'Tools' subdirectory from the VDR archive. All contributed tools
can now be found at ftp://ftp.cadsoft.de/pub/people/kls/vdr/Tools.
|
|
- Completed storing the current audio volume in the setup.conf file (thanks
to Andy Grobb).
- Fixed closing the progress display with the "Back" key when in trick mode
and Setup.ShowReplayMode is enabled (thanks to Stefan Huelswitt).
- New SVDRP commands LSTR and DELR to list and delete recordings (thanks to
Thomas Heiligenmann).
- Fixed a crash when pressing the '2' button while replaying a DVD.
- Updated 'channels.conf' for the "Bundesliga" channels of Premiere World
(thanks to Mel Schächner).
- Changed the tuning code to use FrontendInfo to detect the type of DVB card.
- Removed the recursion stuff from cThread (cMutex already does this).
- Fixed handling the repeat function in the channel display.
- Avoiding multiple EPG entries for the same event (thanks to Rolf Hakenes
for some valuable information on how to do this).
- A recording on the primary interface can now be stopped to make it continue
on an other free DVB card (if one is free at the moment). See MANUAL for
details.
- Added some missing teletext PIDs (thanks to Norbert Schmidt).
- Added PTS to the converted PCM audio when replaying a DVD (thanks to Andreas
Schultz). Now the audio and video of a DVD replayed over the DVB card's A/V
out should always be in sync.
- Fixed handling the "Power" key in case Setup.MinUserInactivity is set to 0 to
disable automatic shutdown.
- Added a fifth parameter to the 'shutdown' call that indicates the reason for
this shutdown request (see INSTALL).
- Fixed releasing 'index' memory after recording or playback.
- Fixed ejecting a DVD while it is being replayed.
- Removed all video overlay stuff from cDvbApi and SVDRP. Guido Fiala's new
'kvdr' version 0.4 now does these things itself. As a consequence of this you
will now need to use kvdr 0.4 or later.
- The device /dev/video is now opened only if necessary (to GRAB an image),
allowing other programs (like 'kvdr', for instance) to use that device.
|
|
- Implemented a lock file to prevent more than one instance of VDR from removing
files from the video directory at the same time.
- The new setup parameter SplitEditedFiles can be used to control whether or
not the result of an editing process shall be written into separate files.
- Fixed handling repeat function when using LIRC (thanks to Matthias Weingart).
- The shutdown program (defined with the '-s' option) now also gets the channel
number and recording title of the timer (see INSTALL).
- New channel data for 'Premiere One', 'Premiere X-Action', 'Fox Kids Türkce'
and 'N24' (thanks to Andreas Share, Ulrich Röder, Uwe Scheffler and Simon
Bauschulte). Note that if you are using the default 'channels.conf' or
'channels.conf.cable' files you may need to check any exiting timers to see
whether they still use the correct channel number.
- Fixed the "EPG bugfix" (sometimes had duplicate information in Subtitle and
Extended Description).
- Fixed checking for valid video device when setting the video mode.
- The external command 'sort' is no longer required. VDR now sorts the list of
recordings itself, making sure that recordings that stem from repeating timers
are sorted chronologically. Sorting is done according to the setting of the
current locale, so you may want to make sure LC_COLLATE is set to the desired
value (see INSTALL).
- Fixed handling 'newline' characters in EPG texts (thanks to Rolf Hakenes for
an improved version of his 'libdtv').
Newline characters are always mapped to a single "blank" in VDR, because they
would otherwise disturb the Title and Subtitle layout in the channel display
(where these are assumed to be single line texts) and would have to be
specially handled in the 'epg.data' file and the LSTE command in SVDRP.
- Mapping ` ("backtick") characters in EPG texts to ' (single quote).
- Fixed timers starting and ending at unexpected times. 'localtime()' was not
thread safe, now using localtime_r().
- Removed the "system time seen..." message.
- Fixed a bug in the replay mode display when pressing the Green or Yellow
button while in trick mode (thanks to Stefan Huelswitt)
- Closing all open file descriptors when calling external programs.
- The menu timeout now also works when pressing the "Back" button during replay
to enter the "Recordings" menu.
- Updated 'channels.conf' for the "Bundesliga" channels of Premiere World
(thanks to Helmut Schächner).
- Fixed reading timers.conf and channels.conf that contain blanks after numeric
values.
- Fixed handling trick modes near the beginning and end of a recording.
- Pressing the "Back" button while replaying a DVD now leads to the DVD menu.
|
|
- Fixed behaviour in case the shutdown didn't take place (there were many
"next timer event at..." messages in that case).
- Reduced the default value for MinEventTimeout to 30 minutes.
- Fixed detecting manual start in shutdown feature.
- An error message is now displayed in case the Transfer Mode can't be
started because the necessary DVB card is currently recording (or there
is no DVB card that can access this channel).
- Fixed toggling channels with the '0' key in case the "Ok" button has been
pressed to display the current/next information.
- Pressing the "Power" key now always initiates the shutdown sequence (after
user confirmation in case of a recording timer), event if there is currently
a menu or a replay session active. Note the additional remarks in INSTALL
regarding the values of the two parameters given to the shutdown program
in case of a currently recording timer.
- Switching through channel groups with the "Left" and "Right" keys now
always starts at the group that contains the current channel.
- Implemented "Multi Speed Mode" (thanks to Stefan Huelswitt).
- Implemented backtracing to hit the right spot after fast forward/rewind
(thanks to Stefan Huelswitt).
- Implemented replay mode display (thanks to Stefan Huelswitt, with a few
rewrites by kls).
- Changed the size of all input buffers used to parse config files or receive
SVDRP commands to the same value of 10KB. This allows long strings to be
used in the 'summary' field of a timer, for instance.
- The pipe to the Dolby Digital replay command (option '-a') now closes all
unused file descriptors in the child process to avoid crashing when the
OSD is used (thanks to Andreas Vitting).
- Switched to the driver's new tuning API (VDR now requires a driver version
dated 2001-09-14 or higher).
- Changed obsolete macro VIDEO_WINDOW_CHROMAKEY to VID_TYPE_CHROMAKEY (thanks
to Guido Fiala).
- New version of the "Master-Timer" tool (thanks to Matthias Schniedermeyer).
- Better error handling when writing configuration files.
- Fixed putting the final editing mark into the edited version's marks file.
- Fixed manipulating an editing mark at the very end of a recording.
- Fixed starting a new replay immediately after stopping a previous one (had
caused a mix between live video and replay).
- Three new keys ("Volume+", Volume-" and "Mute") to control the DVB card's
audio output volume.
- New version of the 'epg2timers' tool (thanks to Carsten Koch).
|
|
- Implemented automatic shutdown (see INSTALL and MANUAL for details).
- New SVDRP command NEXT to show the next timer event.
- The new remote control key "Power" can be used to turn the VDR machine
off (this requires the presence of the '-s' option).
- Fixed code for the default "Ok" button on the PC keyboard (was 0x162 on
the "good old" keyboards (with the F-keys at the left side), while it changed
to 0x15E on the newer keyboards).
- When a recording is edited, the summary information (if present) is now
also copied.
- When a recording is running on the primary interface, any attempt to change
the current channel will now lead to a "Channel locked" message.
- The main program loop now first checks whether any timer recordings are
finished, before starting a new timer recording. This is important in case
one timer ends at the same time another timer starts.
- New setup parameter OSDMessageTime to define how long an OSD message shall
be displayed.
- The "File" parameter of a timer can now contain the '~' character to store
the recording in a hierarchical directory structure. The '~' character has
been chosen since the file system's directory delimiter '/' may be part of
a regular programme name (showing the directory hierarchy in the "Recordings"
menu will follow later).
- Repeating timers now create recordings that contain the 'Subtitle' information
from the EPG data in their file name. Typically (on tv stations that care
about their viewers) this contains the episode title of a series. The
subtitle is appended to the timer's file name, separated by a '~' character,
so that it results in all recordings of this timer being collected in a
common subdirectory. You can disable this with the 'UseSubtitle' parameter
in the "Setup" menu.
- The summary information is now taken from the EPG data at the actual time of
recording (no longer at the time the timer is created in the "Schedule" menu).
If a timer already has summary data, that data will be used. If you have
repeating timers in your 'timers.conf', you may want to make sure they do
NOT contain any summary information (that's the last field in the timer
definitions). Use your favourite text editor to delete that information.
That way every recording will store the actual summary data at the time of
the recording.
|
|
- The menus and the channel display now show the current date and time.
- The new Setup parameter MaxVideoFileSize can be used to customize the
maximum size of the recorded video files.
- Fixed a bug in handling repeating timers that record over midnight (the
calculation of matching timers has been completely rewritten).
- Timers that are currently recording are now marked with '#' in the "Timers"
menu.
- Timers are now sorted in the "Timers" menu, showing the sequence in which
they will be recording. This can be disabled in the "Setup" menu. Note
that the "Mark" button doesn't work if timers are displayed sorted.
|
