summaryrefslogtreecommitdiff
path: root/i18n.h
AgeCommit message (Collapse)Author
2008-04-13Version 1.7.0vdr-1.7.0Klaus Schmidinger
- Re-implemented handling of DVB-S2, which first appeared in version 1.5.14, but was revoked in version 1.5.15 in favor of making a stable version 1.6.0. VDR now requires the "multiproto" DVB driver, e.g. from http://jusst.de/hg/multiproto. Note that the channels.conf file now supports additional parameters, so you may want to make sure you have a backup of this file in case you need to go back to the previous version of VDR! - Fixed displaying transponder data when it is modified (thanks to Reinhard Nissl). - Fixed handling the counter in detection of pre 1.3.19 PS data (thanks to Reinhard Nissl). - Improved logging system time changes to avoid problems on slow systems under heavy load (suggested by Helmut Auer). - Now setting the thread name, so that it can be seen in 'top -H' (thanks to Rolf Ahrenberg). - Fixed initializing the timer's flags in the cTimer copy constructor (thanks to Andreas Mair). - Fixed setting the OSD level in the 'osddemo' example (thanks to Wolfgang Rohdewald). - Increased the time between checking the CAM status to 500ms to avoid problems with some CAMs (reported by Arthur Konovalov).
2008-01-27Version 1.5.14vdr-1.5.14Klaus Schmidinger
- Fixed the Play function in the pictures plugin. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Updated the Makefile of the skincurses plugin (thanks to Rolf Ahrenberg). - The new option --localedir can be used to set the locale directory at runtime (based on a patch from Stefan Huelswitt). - Fixed finding new transponders (thanks to Winfried Köhler). - Implemented handling of DVB-S2 (thanks to Marco Schlüßler and Reinhard Nissl for a patch that was used to implement this). VDR now requires the "multiproto" DVB driver, e.g. from http://jusst.de/hg/multiproto. - Removed switching to the next higher or lower channel if the current channel is not available, in order to allow staying on an encrypted channel that takes a while for the CAM to start decrypting.
2007-08-26Version 1.5.9vdr-1.5.9Klaus Schmidinger
- Fixed handling locale directories with a large number of entries (thanks to Anssi Hannula). - Updated Turkish language texts (thanks to Oktay Yolgeçen). - Fixed stripping the context in I18nTranslate() (reported by Christian Wieninger). - Fixed detecting whether a particular locale is actually supported. - Added a note about LANG having to be set to a valid locale in INSTALL (suggested by Matthias Fechner). - Fixed some compiler warnings with gcc-4.2.0 (thanks to Matthias Schwarzott). - Fixed setting the locale file name in i18n-to-gettext.pl (thanks to Matthias Schwarzott). - Changed the default for LOCDIR in Makefile and Make.config.template to "./locale", so that internationalization works by default when running VDR from within its source directory (suggested by Anssi Hannula). - Added the new i18n macro trVDR(), which can be used by plugins to mark texts they want to reuse from VDR's core translations (suggested by Matthias Becker). - VDR now uses the default configuration directory as defined in the CONFDIR varable in the Makefile (thanks to Thomas Schmidt). - The SVDRP command LSTC can now list the channels with group separators if the option ':groups' is given (thanks to Andreas Mair). - Added a missing error report to cCuttingThread::Action() (thanks to Udo Richter). - There can now be more than one OSD at the same time. At any given time, however, only one of them can be active (and thus visible). This is to allow displaying things like subtitles in an easy way. A cOsd therefore now has a "Level", and only the OSD with the smallest level will be displayed. The level 0 OSD is special, and there can only be one with this level. If there is more than one OSD with a particular level, only the one that was created first will be displayed. Plugins that provide an OSD need to adjust their cOsdProvider::CreateOsd() function to hand through the Level. - Fixed checking for ttDolbyLast in cDevice::SetCurrentAudioTrack() (thanks to Marco Schlüßler).
2007-08-19Version 1.5.8vdr-1.5.8Klaus Schmidinger
- Added missing install-i18n to the install target in the Makefile (reported by Joachim Wilke). - Fixed a faulty comment in Make.config.template (reported by Marco Schlüßler). - Improved i18n-to-gettext.pl (thanks to Matthias Schwarzott). - Moved the "all" target in plugin Makefiles before the "Implicit rules", so that a plain "make" will compile everything (suggested by Matthias Schwarzott). The "newplugin" script has been changed accordingly. Plugin authors may want to change their Makefiles, too. - Added DESTDIR and PREFIX handling to the Makefile (thanks to Matthias Schwarzott). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added internationalization to the "skincurses" plugin (thanks to Rolf Ahrenberg). - Checking the string for NULL in I18nTranslate(). - Updated the French OSD texts (thanks to Bruno Roussel). - Some optimizations in cDvbDevice::SetChannelDevice() (thanks to Tobias Bratfisch). - Optimized cMenuEditChrItem::Set() (thanks to Tobias Bratfisch). - Optimized cNitFilter::Process() (thanks to Tobias Bratfisch). - Reduced the number of time(NULL) calls in vdr.c's main loop to a single call (thanks to Tobias Bratfisch). - Changed cBitmap::DrawText() to always draw the background unless ColorBg is clrTransparent (thanks to Christoph Haubrich). - The "Setup/OSD/Language" menu now only shows those languages that actually have a locale (suggested by Anssi Hannula). - Now using setenv() instead of setlocale() to set the language for gettext() (suggested by Anssi Hannula; thanks also to Ludwig Nussel for a hint on using _nl_msg_cat_cntr). - When scanning the locale directory, VDR now explicitly looks for a file named vdr.mo. Text files for plugins are now named "vdr-name.mo", when "name" is the name of the plugin. The "newplugin" script has been changed accordingly, and plugin authors should change their Makefiles, too.
2007-08-12Version 1.5.7vdr-1.5.7Klaus Schmidinger
- All logging now goes to LOG_ERR, because some systems split error, info and debug messages into separate files, which repeatedly caused extra efforts to find out when incomplete log excerpts were attached to problem reports in the past. - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed a problem with characters >0x7F in the modified version of skipspace() (thanks to Marco Schlüßler). - Fixed a bug I introduced when simplifying the original patch for detecting Premiere NVOD channel links (crash reported by Malte Schröder). - Internationalization is now done with 'gettext' (following a suggestion by Lucian Muresan). Plugin authors may want to use the Perl script 'i18n-to-gettext.pl' to convert their internationalized texts to the gettext format (see the instructions inside that script file). The function cPlugin::RegisterI18n() is still present for compatibility, but doesn't have any more functionality. So plugins that don't convert their texts to the gettext format will only present English texts. See PLUGINS.html, section "Internationalization", for instructions on how to make strings in arrays translatable. See README.i18n for information on how to create new or maintain existing translations. - The three letter language codes and their aliases are stored in i18n.c, and each translation file only contains one of them to link that language name to the code. - The 'newplugin' script has been extended to generate the Makefile section for i18n support. - The parameter OSDLanguage in 'setup.conf' is now a string and holds the locale code of the selected OSD language (e.g. en_US). If Setup.OSDLanguage is not set to a particular locale that is found in VDR's locale directory, the locale as defined in the system environment is used by default. - The list of tracks given in cStatus::SetAudioTrack() is now NULL terminated, so that plugins can actually use all the strings in the list, not just the one pointed to by Index (thanks to Alexander Rieger). - Fixed handling kLeft in the calls to cStatus::MsgOsdTextItem() (thanks to Alexander Rieger). - Added the "...or (at your option) any later version" phrase to the license information of all plugins, and also the 'newplugin' script (suggested by Ville Skyttä). Plugin authors may want to consider doing the same. - Fixed the link to the GPL2 at http://www.gnu.org in vdr.c (thanks to Ville Skyttä). - cBitmap::SetXpm() now checks whether the given Xpm pointer is not NULL, to avoid a crash with files that only contain "/* XPM */" (suggested by Andreas Mair). - Added a debug error message to cReceiver::~cReceiver() in case it is still attached to a device (thanks to Reinhard Nissl).
2007-06-10Version 1.5.3vdr-1.5.3Klaus Schmidinger
- Fixed some spelling errors in 'newplugin' (thanks to Ville Skyttä). - Fixed a busy loop in fast forward if the next video data file is missing (thanks to Reinhard Nissl). - Fixed handling frequencies in NitFilter::Process() (thanks to Anssi Hannula). - Fixed a race condition with signal handlers at program exit (thanks to Udo Richter). - Non-primary devices in Transfer mode are now also used for recording (thanks to Anssi Hannula). - Fixed handling ChannelUp/Down keys if there is currently a replay running (thanks to Marco Schlüßler). - The new SVDRP command REMO can be used to turn VDR's remote control off and on in case other programs need to be controlled (based on patches from Krzysztof Parma and Helmut Auer). - Increased the maximum number of CA system ids to cope with the AlphaCrypt CAM's version 3.11 firmware. - Fixed getting the code setting from the locale (thanks to Matthias Schwarzott). - Implemented support for Freetype fonts (based on a patch from Alexander Riedel). The font names and sizes can be adjusted in the "Setup/OSD" menu. Note that VDR now requires freetype fonts to be installed in /usr/share/fonts/truetype. - If the OSD device in use has at least 8bpp bitmap depth and this is also used by the current skin, Freetype fonts are displayed "anti-aliased". The new setup parameter "OSD/Anti-alias" can be used to turn this off. - The new function cOsd::SetAntiAliasGranularity() can be used to help the OSD in managing the available color palette entries when doing anti-aliasing. Skins that use 8bpp bitmaps can call this function with the maximum number of colors used, and the maximum number of color combinations. The OSD will then evenly split the available palette entries between the various colors combinations, so that fonts can be "anti-aliased". By default a total of 10 colors and 10 combinations is assumed. - The pixel fonts have been completely removed from the VDR source. - VDR is now "UTF-8 aware". It handles strings according to the character encoding used on the user's system. All internationalization strings and incoming SI data are converted to the system encoding. - Plugins that handle strings need to be aware that on systems with UTF-8 encoding a "character symbol" may consist of more than a single byte in memory. The functions and macros named Utf8...() can be used to handle strings without needing to care about the underlying character encoding (see tools.h for details). - Even though the weekdays of repeating timers are presented to the user as UTF-8 characters in the OSD, the timers.conf file and the SVDRP timer commands still use single byte characters ("MTWTFSS") to make sure this information is handled correctly between systems with different character encodings. - Added a missing i18n string for "CAM" in the Turkish OSD texts. - Improved editing strings that are too long to fit into the editable area. - Changes to the OSD settings in the "Setup/OSD" menu now immediately take effect when the "Ok" key is pressed.
2007-04-22Version 1.5.2vdr-1.5.2Klaus Schmidinger
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed handling user activity for shutdown, which I had messed when adopting Udo's original patch (thanks to Udo Richter). - Added Turkish language texts (thanks to Oktay Yolgeçen). - Added missing rules for generating iso8859-13 font to Makefile. - 'libsi' now converts the incoming strings into the system's character set according to the DVB standard. The system's character set is determined from the LANG environment variable. If no recognizable setting can be found, no conversion will take place. Note that currently only the strings received from the SI data stream are converted, there have not been any changes regarding displaying UTF-8 characters on the OSD, yet - this will follow in one of the next steps. With this conversion, it should now be safe to run VDR on a UTF-8 file system, because all incoming characters are converted to UTF-8. This will most likely result in wrong characters being displayed on the OSD (because there UTF-8 is not known, yet), but the file names should be ok (haven't tested this myself, though, because I don't do UTF-8 - so please be very careful when testing!). There's one piece of bad news here: the German pay-tv broadcaster Premiere apparently encodes all EPG strings as ISO8859-1, but fails to correctly mark these strings as such. Therefore 'libsi' (following the DVB standard) considers the strings to be encoded in the default ISO6937 and converts them to whatever the system's character set is. This, of course, results in wrong umlauts. On its old transponder, the ProSieben/SAT.1 channels also had their EPG data wrongly encoded, but apparently on the new transponder they started broadcasting on this month, they got it right.
2006-03-26Version 1.3.45vdr-1.3.45Klaus Schmidinger
- Fixed updating the "Info" button in the "Timers" menu. - Reduced the number of events to actually check when setting events to timers. - cMenuEditIntItem now checks the given value and forces it to be between the given min and max limits. - The status changes of EPG events are now logged for all channels that have timers. - Removed the log message "deleting plugin: ..." when shutting down VDR (thanks to Christoph Haubrich for reporting that this is irritating when calling "vdr --help"). - Fixed cReadLine::Read() for lines that end with the infamous "\r\n" (thanks to Rolf Ahrenberg). - Fixed cDvbDevice::SetAudioBypass() in case setTransferModeForDolbyDigital is false (thanks to Werner Fink). - Updated 'sources.conf' (thanks to Oleg Roitburd). - Fixed the shutdown timeout (thanks to Alexander Wenzel). - Only calling RemoveEmptyVideoDirectories() once in case a recording has been deleted (reported by Hardy Flor). - Fixed deleting recordings that have been removed externally when running out of disk space (reported by Jan Lenz). - Fixed handling repeating VPS timers (they stopped recording too early). - Timer log messages now show "VPS" if this is a VPS timer. - Fixed getting the present EPG event in case none is currently 'running' (it then returns the one that just ended). - Fixed calling a plugin's main menu function while a message is being displayed (reported by Helmut Auer). - Updated the Russian OSD texts (thanks to Oleg Roitburd). - Made cMenuRecordings::GetRecording() 'protected' (suggested by Marius Heidenstecker). - Speeded up cRemux::ScanVideoPacket() (thanks to Reinhard Nissl). - Enhanced logging EPG event data. - Fixed format string handling (thanks to Darren Salt). - The new function cDevice::ForceTransferMode() can be used to force the primary device into transfer mode (thanks to Reinhard Nissl). - The 'version' of EPG events is now ignored when reading EPG data from 'epg.data' or via SVDRP/PUTE to avoid problems with double EPG events. - The 'running status' of EPG events is now only set to SI::RunningStatusNotRunning for events before the present event. - Fixed some #include sequences. - Single shot VPS timers are now only considered 'expired' if their associated EPG event has been explicitly set to SI::RunningStatusNotRunning. - The check for timers to be deleted is now done only every 30 seconds.
2006-02-05Version 1.3.42vdr-1.3.42Klaus Schmidinger
- Removed leftover 'needsBufferReserve' variable from cTransfer (thanks to Marco Schlüßler). - Fixed setting "No title" for broken event data (reported by Ronny Kornexl). - Fixed channel up/down switching on single card systems (reported by Stefan Huelswitt). - Fixed handling "pending" timers that blocked others that actually could record (reported by Thomas Koch). - Speeded up cVideoRepacker (thanks to Reinhard Nissl). - Added an 'Id' parameter to cDevice::PlayAudio() to allow plugins to easier process the audio data (thanks to Marco Schlüßler). - Added Czech language texts (thanks to Vladimír Bárta). Plugin authors may want to add the new entries to their I18N texts and contact the translators to have their texts translated. Note that there are now 21 different OSD languages, so please make sure you have 21 versions for each of your texts. - Updated the Polish OSD texts (thanks to Jaroslaw Swierczynski). - Fixed auto advance in string entry fields when pressing Up/Down in insert mode (reported by Udo Richter). - Fixed handling the "Setup/OSD/Menu button closes" option when set to 'yes' in case a replay is active (thanks to Udo Richter). - Improved cUnbufferedFile; USE_FADVISE is now defined in tools.c by default, so if you don't want to use "fadvise" you need to comment out that line (thanks to Artur Skawina). - Fixed a missing ',' in the Swedish OSD texts (thanks to Arthur Konovalov). - cDevice::Transferring() can now be used to determine whether the (primary) device is currently playing in Transfer Mode (based on a suggestion by Reinhard Nissl). - The 'runvdr' script no longer uses the $VDRUSR environment variable to set the user id under which 'vdr' shall run. Just add the '-u username' option when you call 'runvdr'. - Fixed multiple entries of the same subdirectory in the "Recordings" menu (reported by Christian Jacobsen). - Enabled generating a core dump if VDR is run with a different user id (thanks to Ville Skyttä). - Fixed handling the "Blue" key in the "Schedule" menu for the current channel (thanks to Rolf Ahrenberg). - Renamed the Makefile target 'plugins-clean' to 'clean-plugins' (suggested by Sebastian Frei). - Made all font and image data 'const' (thanks to Darren Salt). - Fixed scrolling with Up/Down in case there are non-selectable items at the beginning or end of the menu (reported by Helmut Auer). - Added cSkin::GetTextAreaWidth() and cSkin::GetTextAreaFont(), so that a plugin that wants to do special text formatting can do so (thanks to Alexander Rieger).
2005-09-11Version 1.3.32vdr-1.3.32Klaus Schmidinger
- Added some missing braces in remux.c (thanks to Wayne Keer for reporting this one). - Removed unused MAINMENUENTRY from svdrpdemo.c (thanks to Udo Richter for reporting this one). - Fixed appending sequence end code in cDvbPlayer::Goto() (thanks to Reinhard Nissl). - Fixed syncing in cRepacker (thanks to Reinhard Nissl). - Now always using stream id 0xE0 for the video stream, to avoid problems with post processing tools that choke on different ids (suggested by Reinhard Nissl). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed cDvbPlayer::SkipFrames() to properly handle radio recordings (thanks to Reinhard Nissl). - Updated the Swedish OSD texts (thanks to Tomas Prybil). - Updated the Slovenian OSD texts (thanks to Matjaz Thaler). - Updated the Danish OSD texts (thanks to Mogens Elneff). - Made LIRC command parsing more robust (thanks to Ville Skyttä). - Introduced a separate 'plugins-install' target in the Makefile (thanks to Daniel Thompson). - Re-introduced the code that waits for a tuner lock in VDR/device.c, since apparently some users actually need it. It's not active by default, you'll have to define the WAIT_FOR_TUNER_LOCK macro in that file if you need it (suggested by Malcolm Caldwell). - Adjusted the Makefile to the dvb-kernel driver on kernel 2.6 and up (thanks to Lauri Tischler). - Repeat keys are now ignored when waiting for a keypress to cancel an operation (thanks to Marko Mäkelä). - The main menu function of a plugin can now be activated through a key macro of the form "@plugin" even if that plugin doesn't have a main menu entry (using part of a patch by Hardy Flor, which originally implemented calling plugins from SVDRP). - The menu timeout handling is now done centrally in the main program loop. - Added missing help for the 'help' keyword in the SVDRP command PLUG. - The main menu function of a plugin can now be called programmatically through the static function cRemote::CallPlugin(). - The SVDRP command PLUG now has a new option 'main' which can be used to initiate a call to the main menu function of a plugin (using part of a patch by Hardy Flor). - The new command line option '--vfat' can be used to make VDR encode special characters in recording file names, even if it wasn't compiled with VFAT=1 (suggested by Peter Bieringer). The compile time option VFAT still exists and creates a VDR that always behaves as if it were called with '--vfat'. - Replaced the ':' delimiter between hour and minute in recording file names with a '.' under Linux, too. Existing recordings with ':' as delimiter will still work. - Implemented the SVDRP command MOVC (thanks to Andreas Brachold). - Added support for multiple audio language codes in ISO639LanguageDescriptors to 'libsi' (thanks to Marcel Wiesweg). - Changed the audio PID language codes to hold up to two 3 letter codes, separated by '+', to store separate languages broadcast in two channel audio mode. - If the preferred audio language is broadcast on a PID that has two different languages in the two stereo channels, the audio channel is now properly set when switching to such a channel (thanks to Mogens Elneff for his help in testing this). - Fixed some typos in MANUAL (thanks to Ville Skyttä). - Fixed the default value for "Setup/EPG bugfix level" (thanks to Ville Skyttä for reporting this one). - Fixed defining timers that only differ in the day of week (thanks to Patrick Rother for reporting this one). - Fixed converting summary.vdr files that would result in a very long 'short text' (thanks to Carsten Koch). - Implemented a hash for the channels to reduce the system load in the EIT scanning thread (based on a patch by Georg Acher).
2004-11-14Version 1.3.16vdr-1.3.16Klaus Schmidinger
- Fixed cChannel::SetName() in case only the ShortName or Provider has changed (thanks to Sascha Volkenandt for reporting this one). - Added Danish language texts (thanks to Mogens Elneff). - Reactivated the NPTL check at startup because there appear to be still unsolved problems when running on NPTL systems. - Added missing calls to cStatus::MsgOsdClear() in cSkins::Message() (thanks to Joachim Wilke for reporting this one, and Andreas Regel for additional input). - Fixed the cDvbSpuDecoder (thanks to Marco Schlüßler). - Fixed handling of pmAudioOnlyBlack (thanks to Stefan Huelswitt). - Fixed a short glitch when starting a recording on the primary device while in replay or transfer mode (thanks to Marco Schlüßler). - Added missing initialization of cEvent::seen. - Checking PID language codes for ISO 639 compliance to avoid problems with funny characters. Invalid language codes will be stored as "???". - The '0' key now toggles the "Day" item in the "Timers" menu between "single shot" and "repeating". The keys '1'...'7' can be used to toggle the individual days ('1' is Monday). Thanks to Sascha Klek for reporting a problem with the '0' key in the "Day" item of the "Timers" menu.
2004-10-17Version 1.3.13vdr-1.3.13Klaus Schmidinger
- Fixed checking for the presence of NPTL (thanks to Jouni Karvo). - Making sure section filters are only set if the device actually has a lock (thanks to Andreas Share for pointing this out). - Fixed a possible NULL pointer assignment in cMenuText::SetText() (thanks to Marco Schlüssler). - Fixed a crash in case the last line in channels.conf is a group separator and that group is selected in the channel display (thanks to Dick Streefland). - Added cRingBufferLinear::Read() to read directly from a file handle into the ring buffer. - Using timeouts in ring buffers to avoid 'usleep()'. - Clearing the 'Transfer Mode' ring buffer after clearing the device to avoid an "almost full" ring buffer. - Removed locking from cRingBufferLinear for better performance under high load. - Using a cRingBufferLinear in cRemux to avoid unnecessary copying of data. - Using a cRingBufferLinear in cTSBuffer and filling it in a separate thread to avoid buffer overflows. Plugins using cTSBuffer will need to remove the call to the now obsolete Read() function (see cDvbDevice::GetTSPacket() for the new usage of cTSBuffer). - cRemux::Process() has been split into Put(), Get() and Del() to allow for a better decoupling of the remuxing and disk writing process. Plugins using cRemux will need to be modified accordingly. - The actual disk writing in recordings is now done in a separate thread to improve the overall throughput. - Changed cRemux so that it returns the maximum available amount of data with each call, not just 2048 byte. - Added a visual display of all cRingBufferLinear buffers for debugging. To activate it, define DEBUGRINGBUFFERS in ringbuffer.h. - Instead of cCondVar now using the new cCondWait (which also avoids a possible "near miss" condition; thanks to Sascha Volkenandt for pointing out this one). cCondVar is still present for plugins that use it (and VDR itself also still uses it in cRemote). - The cRingBuffer now does EnableGet()/EnablePut() only if the buffer is more than one third full or empty, respectively. This dramatically improves recording performance and reduces system load (thanks to Marco Schlüßler for doing some testing regarding buffer performance and giving me some hints that finally led to finding out that this was the basic problem causing buffer overflows). - Improved Transfer Mode (thanks to Marco Schlüßler for suggestions and testing). - Fixed a possible crash with inconsistent SI data (thanks to Marcel Wiesweg). - Fixed showing the replay mode if the OSD is currently in use (thanks to Kimmo Tykkala for pointing out this problem). - cOsdProvider::NewOsd() now always returns a valid pointer, even if the OSD is currently in use (it will then return a dummy cOsd object and write a message to the log file). - Added Estonian language texts (thanks to Arthur Konovalov). - Fixed 'newplugin' and libsi/Makefile to use the compiler defined in $(CXX) for generating file dependencies (thanks to Andreas Brachold). - Moved the initialization of aPid1 and aPid2 to the beginning of cDvbDevice::cDvbDevice() to have them set in case a patch references them (thanks to Wayne Keer for pointing this out). - Completed the Russian OSD texts (thanks to Vyacheslav Dikonov). - Avoiding unnecessary section filter start/stops (thanks to Marco Schlüßler). - Made the "Channel not available!" message and mtInfo instead of mtError (suggested by Wayne Keer). - Made volume control more linear (thanks to Emil Naepflein and Udo Richter). - Now skipping code table info in SI data (suggested by Milos Kapoun). - Added missing Czech characters to fontosd-iso8859-2.c (thanks to Milos Kapoun). - Fixed a crash in the time search mechanism (reported by Reinhard Nissl). - If one PID can't be added, the whole cDevice::AttachReceiver() will now fail and all PIDs added so far will be deleted (thanks to Marco Schlüßler for pointing out this one). - Now only saving channels.conf after a modification made by the user (avoids lots of disk access due to automatic channel updates). Automatic channel modifications will be saved every 10 minutes if no recording is currently active. - Removed the 'Log' parameter from the cChannel::Set... functions. Instead checking if the channel has a non-zero number. - Updated 'channels.conf.terr' for Hannover (thanks to Sven Kreiensen).
2004-05-16Version 1.3.7vdr-1.3.7Klaus Schmidinger
- Fixed a memory leak in thread handling when using NPTL (thanks to Jon Burgess). - Fixed handling Setup.RecordDolbyDigital, which was broken since version 1.1.6. - Fixed handling text lengths for itemized EPG texts (thanks to Marcel Wiesweg). - Fixed the help for LSTE and LSTR (was broken in 1.3.6). - Improved iso8859-7 fonts (thanks to Dimitrios Dimitrakos). - Added some 3-letter language codes (thanks to Marcus Mönnig). - Added language code handling to the subtitling descriptor in 'libsi' (thanks to Pekka Virtanen). - Moved several menu item classes from menu.c to menuitems.[hc] to make them available for plugins. - The epg2html.pl script now handles '|' in description texts. - The new setup option "OSD/Use small font" can be used to control the use of the small font (see MANUAL for details). - Swapped osd.[hc] and osdbase.[hc] to have the virtual OSD base class named cOsd. Plugins may need to adjust their #include statements. - Colors are now given as AARRGGBB instead of AABBGGRR. The values are mapped to the driver's (wrong) sequence in dvbosd.c (this should really be fixed in the driver, together with the endian problem). - The new OSD setup parameters "Left" and "Top" can be used to define the top left corner of the OSD. - The OSD size parameters are now in pixel (as opposed to formerly characters). When reading a 'setup.conf' file from an older version of VDR, the OSDwidth and OSDheight values will be converted to pixel automatically. - The OSD is now fully device independent. See the comments in VDR/osd.h and the description in PLUGINS.html for information on how a plugin can implement an OSD display on arbitrary hardware. - The OSD (actually its cBitmap class) can now handle XPM files. There are several XPM files in the VDR/symbols directory which can be used by skins (some of these have been taken from the "elchi" patch). See VDR/skinsttng.c for examples on how to use these. - Due to the changes in the OSD handling the DEBUG_OSD option for a textual OSD has been dropped. There will be a plugin that implements a skin with this functionality later. - The entire OSD display can now be implemented via "skins". See VDR/skins.[hc], VDR/skinclassic.[hc], VDR/skinsttng.[hc] and PLUGINS.html for information on how a plugin can implement its own skin. By default VDR comes with a "Classic" skin that implements the OSD display known from previous versions, and the new skin named "ST:TNG Panels", which is also the default skin now. The actual skin can be selected through "Setup/OSD/Skin". - The colors used in a skin can now be configured using "themes". See PLUGINS.html for information on how a skin can make use of themes, and man vdr(5) for the structure of a theme file. The actual theme to use can be selected through "Setup/OSD/Theme". - Added Croatian language texts (thanks to Drazen Dupor). NOTE: there is apparently a problem with the newly introduced iso8859-2 font, because as soon as Setup/OSD/Language is set to Croatian (currently the last one in the list) everything freezes and the vdr processes have to be killed with -9 and the driver needs to be reloaded. Maybe somebody else can find out what's going wrong here... - Added missing NULL checks when accessing sectionHandler in device.c (thanks to Pekka Virtanen). - Fixed setting the time from the DVB data stream (thanks to Helmut Auer for pointing out a frequency/transponder handling mixup). This now also takes the actual source (sat, cable etc.) into account. Please go into "Setup/EPG" and set the "Set system time" and "Use time from transponder" parameters accordingly (this is necessary even if you have already set them before!).
2004-01-25Version 1.3.3vdr-1.3.3Klaus Schmidinger
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added ISO639LanguageDescriptor to 'libsi'. - Changed the 'languageCode' members in the descriptor classes of 'libsi' to 'char[4]' and setting the 4th byte to 0 for easier handling. - Fixed frequency handling when setting the CA descriptors in cDvbTuner::Action() (thanks to Jan Ekholm for reporting and helping to debug this one). - Now setting CA descriptors even if "Setup/DVB/Update channels" is less than 2. - There can now be up to 32 audio and Dolby PIDs (however, currently still only the first two are used throughout the rest of the program). - The audio and Dolby PIDs in 'channels.conf' now can have an optional language code (see man vdr(5)). Currently this is only stored and not yet used otherwise. - Added a call to cStatus::MsgOsdCurrentItem() to cMenuEditItem::SetValue() (thanks to Martin Hammerschmid).
2004-01-18Version 1.3.2vdr-1.3.2Klaus Schmidinger
- Fixed resetting the EPG data versions after changing the preferred languages (thanks to Teemu Rantanen for reporting this one and helping to debug it). - Added LinkageDescriptor handling to 'libsi' (thanks to Marcel Wiesweg). - Added Russian language texts (thanks to Vyacheslav Dikonov). Plugin authors may want to add the new entries to their I18N texts and contact the translators to have their texts translated. Note that there are now 17 different OSD languages, so please make sure you have 17 versions for each of your texts. - Some corrections and additions to the Finnish OSD texts (thanks to Rolf Ahrenberg and Niko Tarnanen). - Fixed a wrong 'delta' value in the call to the shutdown script (thanks to Stephan Epstein for reporting this one). - Activated detection of radio channels (to avoid reports about "channels not being detected that used to be detected with the 'scan' utility or the original 'autopid' patch ;-). - Channels with a zero VPID no longer write a PPID into channels.conf. - Short channel names are now only stored if they actually differ from the full name. - The EPG scan now scans newly found transponders together with already existing ones. - The "Red" button in the "Setup/EPG" menu can now be used to force an EPG scan on a single DVB card system (see MANUAL for details). - The new SVDRP command 'SCAN' can be used to force an EPG scan on a single DVB card system (see MANUAL under Setup/EPG for details). - Fixed handling PID changes in 'Transfer Mode'. - Excess blanks in channel names read from the SDT are now removed. - Fixed wrong parameter settings when scanning NITs for terrestrial transponders (thanks to Christian Tramnitz for pointing out this one). - Fixed some out of bounds parameter settings when scanning NITs for cable and satellite transponders. - Added 'libsi' include files to the 'include' directory, so that plugins can use them (thanks to Marcel Wiesweg). - Now only processing NITs that contain the transponder they are actually broadcast on. - Fixed setting the source type for newly detected terrestrial transponders (thanks to Christian Tramnitz for his support in debugging this).
2004-01-11Version 1.3.1vdr-1.3.1Klaus Schmidinger
- Fixed a lockup in the EPG scanner when no non-primary device was available (thanks to Martin Holst for reporting this one). - Fixed a compiler warning about virtual cConfig::Load() functions (thanks to Lauri Tischler for reporting this one). - Fixed a warning about character comparison in libsi/si.c (thanks to Lauri Tischler for reporting this one). - The new parameter "Update channels" in the "Setup/DVB" menu can be used to control if and how channels will be automatically updated (see MANUAL). This has already been part of the 'autopid' patch by Andreas Schultz and has now been adopted. - Fixed a crash in case there is no DVB hardware present (thanks to Sascha Volkenandt for reporting this one). - Changed calculation of channel ids to make it work for tv stations that use the undefined NID value 0 (thanks to Teemu Rantanen for reporting this one). - Enhanced the SDT filter to handle multi part sections. - Added support for selecting preferred EPG languages (based upon a patch by Teemu Rantanen). - Fixed a 'const' in libsi/si.h (thanks to Marcel Wiesweg). - Fixed the 'su' call in 'runvdr' to make it work on systems that require the user name to appear before the command option (thanks to Robert Huitl). - Fixed testing for matching section filters in case they are turned off (thanks to Marcel Wiesweg). - In case of incomplete sections an error message is now logged only every 10 seconds. - Fixed a possible NULL pointer access in cEITScanner::Process() (thanks to Andreas Kool). - The actual transponder data is now taken from the NIT and existing channels are adjusted if necessary. If the NIT contains new transponders, they are scanned for channels during the next EPG scan. Note that only the satellite branches are tested, cable and terrestrial need to be tested by somebody who actually has such equipment.
2004-01-04Version 1.3.0vdr-1.3.0Klaus Schmidinger
- Changed thread handling to make it work with NPTL ("Native Posix Thread Library"). Thanks to Jon Burgess, Andreas Schultz, Werner Fink and Stefan Huelswitt. - The cThread class now accepts a 'Description' parameter, which is used to log the beginning and end of the thread, together with its process and thread id. For descriptions that need additional parameters you can use the function cThread::SetDescription(), which accepts 'printf()' like arguments. Existing plugins that use threads should be changed to use this functionality instead of explicit 'dsyslog()' calls inside their Action() function in order to support logging the thread ids. - Added "Slovak Link" and "Czech Link" to 'ca.conf' (thanks to Emil Petersky). However, 'ca.conf' is now pretty much obsolete due to the automatic CA handling. - Mutexes are now created with PTHREAD_MUTEX_ERRORCHECK_NP, which makes the 'lockingTid' stuff obsolete (thanks to Stefan Huelswitt). - Changed font handling to allow language specific character sets. - Adopted the small font character set from the "Elchi" patch (originally provided by Alessio Sangalli). - Greek language texts now use iso8859-7 character set (thanks to Dimitrios Dimitrakos). - Rearranged section data handling, so that the actual data handling can be done separately, even from within plugins. - The EPG data structures have been moved from eit.[hc] to epg.[hc] and have been adapted to the general VDR coding style. Plugins that use these data structures may need to change some function names (which should be obvious). The name 'subtitle' has been changed to 'shortText' to avoid clashes with actual subtitles that are part of a movie. The name 'extendedDescription' has been shortened to 'description'. - Replaced 'libdtv' with 'libsi' (thanks to Marcel Wiesweg), which is thread safe and can be used by multiple section filters simultaneously. - Added 'cRwLock' to 'thread.[hc]'. Note that all plugin Makefiles need to define _GNU_SOURCE for this to work (see the example plugin Makefiles and 'newplugin'). - Fixed a problem with crc32 in SI handling on 64bit systems (thanks to Pedro Miguel Sequeira de Justo Teixeira for reporting this one). - Fixed an alignment problem in CAM access on 64bit systems (thanks to Pedro Miguel Sequeira de Justo Teixeira for reporting this one). - Added 'StreamType' setting to CAM communication, which is important for Aston/SECA CAMs (thanks to Antonino Sergi). - Now the CA descriptors are sent to the CAM in the 'program' or 'ES level' sections, depending on where they are found in the PMT (thanks to Hans-Peter Raschke for reporting this one). This should make SkyCrypt CAMs work. - Now using the 'version number' of EPG events to avoid unnecessary work. - Channel data is now automatically derived from the DVB data stream (inspired by the 'autopid' patch from Andreas Schultz). - The current channel is now automatically re-tuned if the PIDs or other settings change. If a recording is going on on a channel that has a change in its settings, the recording will be stopped and immediately restarted to use the new channel settings. - EPG events now use the complete channel ID with NID, TID and SID. - Channel names in 'channels.conf' can now have a short form, as provided by some tv stations (see man vdr(5)). Currently channels that provide short names in addition to long ones are listed in the OSD as "short,long name", as in "RTL,RTL Television". The short names will be used explicitly later. - The Ca parameter in 'channels.conf' has been extended and now contains all the CA system ids for the given channel. When switching to a channel VDR now tests for a device that provides one of these CA system ids. The devices automatically get their supported ids from the CI handler. - The values in 'ca.conf' are currently without any real meaning. Whether or not a channel with conditional access can be received is now determined automatically by evaluating its CA descriptors and comparing them to the CA system ids provided by the installed CAM. Only the special values 1-16 are used to assign a channel to a particular device. - Increased the maximum number of possible OSD colors to 256. - Limited the line length in the EPG bugfix report, which appears to fix a buffer overflow that caused a crash when cleaning up the EPG data (at 05:00 in the morning).
2003-05-18Version 1.1.32vdr-1.1.32Klaus Schmidinger
- Removed a faulty parameter initialization in menu.c (thanks to Lauri Tischler for reporting this one). - Re-implemented the WaitForPut/WaitForGet stuff in cRingBuffer, since some plugins actually need this. By default the buffer does not wait; if a plugin needs the waiting functionality it can call the new SetTimeouts() function. - Moved the call to cPlugin::Start() further up in vdr.c, to make sure it gets called before trying to learn the keys (problem reported by Oliver Endriss). - No longer starting the editing process if no marks have been set (thanks to Matthias Raus for reporting this one). - Added Catalanian language texts (thanks to Marc Rovira Vall and Ramon Roca). Plugin authors may want to add the new entries to their I18N texts and contact the translators to have their texts translated. Note that there are now 16 different OSD languages, so please make sure you have 16 versions for each of your texts. - Moved the detection of a broken video data stream from the cDevice into the cRecorder to avoid problems with cReceivers that want to receive from PIDs that are currently not transmitting (thanks to Marcel Wiesweg for reporting this one). - Fixed setting the locking pid after a timed wait (thanks to Andreas Schultz). - Avoiding spurious section filter settings after a channel switch. - Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt). - Fixed reading 'epg.data' for channels with non-zero RID (thanks to Oliver Endriss for reporting this one). - Fixed EPG bugfix statistics to avoid log entires for undefined channels (thanks to Lars Bläser for reporting this one). - No longer waiting inside cIndexFile::CatchUp() to avoid shortly blocking replay at the end of a recording.
2002-06-23Version 1.1.4vdr-1.1.4Klaus Schmidinger
- Added Hungarian language texts (thanks to Istvan Koenigsberger and Guido Josten). - Activated cutting. - Activated 'Transfer Mode'. - Moved handling of the Menu key entirely into vdr.c. - Switched VDR's own player to the new cPlayer/cControl structures. - Switched handling 'Transfer Mode' to the new cPlayer/cControl structures. - The following limitations apply to this version: + The '-a' option (for Dolby Digital audio) doesn't work yet. + Switching between different language tracks doesn't work yet.
2002-06-16Version 1.1.3vdr-1.1.3Klaus Schmidinger
- Improved the VDR Makefile to avoid a warning if the '.dependencies' file does not exist, and also using $(MAKE) to call recursive makes. - Changed the name of the 'package' target in the plugin Makefiles to 'dist' (following the suggestions in the "GNU Make" manual). If you already have started a plugin project, you may want to change this in your Makefile accordingly. - Improved the plugin Makefile to avoid a warning if the '.dependencies' file does not exist, and also using $(shell...) to get the version numbers. If you already have started a plugin project, you may want to change this in your Makefile accordingly. - Fixed some function headers to make them compile with gcc 3.x (thanks to Gregoire Favre). - Fixed the cutting mechanism to make it re-sync in case a frame is larger than the buffer (thanks to Sven Grothklags). - Added an error message if the directory specified in the '-L' option can't be accessed (suggested by Stefan Huelswitt). - Rearranged OSD class names to make 'cOsd' available for the main OSD interface. - Completely moved OSD handling out of the cDvbApi class, into the new cOsd. - Implemented cStatus to allow plugins to set up a status monitor. See PLUGINS.html for details. - Moved the cEITScanner out of dvbapi.h/.c, into the new eitscan.h/.c. - Added Swedish language texts (thanks to Tomas Prybil). - Fixed parsing 'E' records in epg2html.pl (thanks to Matthias Fechner for pointing out this one). - Removed compiler option '-m486' to make it work on non-Intel platforms. If you have already started a plugin project, you may want to make sure you remove this option from your existing Makefile. - Completely rearranged the recording and replay functions to make them available to plugins. - Replay is now done in a single thread (no more syncing between input and output thread necessary). - It is now possible to record several channels on the same transponder with "budget cards". VDR automatically attaches a recording timer to a card that already records on the appropriate transponder. How many parallel recordings can actually be done depends on the computer's performance. Currently any number of recordings gets attached to a card, so you should carefully plan your timers to not exceed the limit. On a K6-II/450 it was possible to record three channels from transponder 12480 with a single WinTV NOVA-S. - Timers that record two successive shows on the same channel may now overlap and will use the same DVB card. During the time where both timers record the data is simply saved to both files. - The following limitations apply to this version: + Transfer mode doesn't work yet. + The '-a' option (for Dolby Digital audio) doesn't work yet. + Switching between different language tracks doesn't work yet. + Cutting doesn't work yet.
2002-05-09Version 1.1.0vdr-1.1.0Klaus Schmidinger
- Begin of the 1.1 development branch. THIS IS NOT A STABLE VERSION! The current stable version for every day use is still the 1.0 branch. - First step towards a universal plugin interface. See the file PLUGINS.html for a detailed description. The man page vdr(1) describes the new options '-L' and '-P' used to load plugins. This first step implements the complete "outer" shell for plugins. The "inner" access to VDR data structures will follow. - The VDR version number is now displayed in the title line of the "Setup" menu.
2000-11-19Version 0.68vdr-0.68Klaus Schmidinger
- Date and time in the title of an event info page are now always right adjusted. - The 'current channel' is now handled device specific (in case there is more than one DVB card). - The 'SetSystemTime' option in the "Setup" menu is now shown as "yes/no". - Implemented "internationalization" (see 'i18n.c' for information on how to add new languages). Thanks to Miha Setina for translating the OSD texts to the Slovenian language. - Fixed learning keys on the PC keyboard (display oscillated). - Fixed a timing problem with OSD refresh and SVDRP. - Avoiding multiple definitions of the same timer in the "Schedule" menu (this could happen when pressing the "Red" button while editing the timer). - There can now be a configuration file named 'commands.conf' that defines commands that can be executed through the "Main" menu's "Commands" option (see FORMATS for details on how to define these commands). - Added a 'fixed' font for use with the output of system commands. - The 'Priority' parameter of the timers is now also used to interrupt a low priority timer recording if a higher priority timer wants to record. - A timer recording on a DVB card with a CAM module will now be interrupted by a timer that needs to use this specific DVB card to record an encrypted channel, if the timer currently occupying this DVB card doesn't need the CAM module (and thus can continue recording on a different DVB card). - The "Yellow" button in the "What's on now/next?" menus now displays the schedule of the current channel from that menu. - All DVB cards in a multi-card system now write their EIT information into the same data structure. - If there is more than one DVB card in the system, the non-primary cards are now used to periodically scan through the channels in order to keep the EPG info up-to-date. Scanning kicks in after 60 seconds of user inactivity (timeout in order to keep user interactions instantaneously) and each channel that has the 'pnr' parameter defined in 'channels.conf' is switched to for 20 seconds. If there is only one DVB card in the system, that card will start scanning after 5 hours (configurable through the "Setup" menu) of user inactivity and will switch back to the channel it originally displayed at the first sign of user activity. Any scanning will only occur if that particular card is not currently recording or replaying. - Now shifting the 'Subtitle' info into the 'ExtendedDescription' on stations that don't send the EIT information correctly (like, e.g., 'VOX'). - Implemented a 10 seconds latency when removing files. - Fixed unwanted reaction on the "Green" and "Yellow" button in the "Event" display. - Implemented 'Transfer Mode' to display video data from the DVB card that actually can receive a certain channel on the primary interface. This is currently in an early state and may still cause some problems, but it appears to work nice already.