| Age | Commit message (Collapse) | Author |
|---|
|
- EPG events from epg.data or SVDRP's PUTE command now have their Title set to
"No Title" if none was set.
- Fixed checking toFile in cCuttingThread::Action() (found in a larger patch from
Artur Skawina).
- Fixed a crash when pressing '0' in the "Schedule" menu on a channel that doesn't
have any EPG data (reported ny Alexander Hans).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Fixed a missing ',' in the Greek OSD texts (thanks to Arthur Konovalov).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Fixed handling the tfRecording flag when reading timers (bug reported by Andreas
Mair).
- Now checking whether the channel exists before setting the PMT filter in
cPatFilter::Process() (thanks to Thomas Bergwinkl).
- Now trying to reestablish the connection to the LIRC daemon in case it breaks
(thanks to Ville Skyttä).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed channel switching with the Down (Up) key in case the current channel is
already the first (last) in the list (reported by Frank Krömmelbein).
- Removed the "buffer reserve" in Transfer Mode - it's no longer necessary with
recent driver/firmware versions.
- The epg.data file is now written when VDR exits (suggested by Daniel Karsubka).
- Fixed cTimers::GetNextActiveTimer() so that it won't return an expired timer
(reported by Rolf Ahrenberg).
- Changed DVBS_TUNE_TIMEOUT and DVBC_TUNE_TIMEOUT to 9000ms to avoid problems with
channels that have low symbol rates (reported by Suur Karu).
- Fixed displaying the current audio track in the channel display.
- When reading epg.data (or data from PUTE), the version number of events with
table IDs smaller than 0x50 is now ignored because otherwise the current
running status would not be set after a restart of VDR.
- Implemented a timeout for remote controls that don't deliver "repeat" keypresses
very fast (based on a suggestion by Luca Olivetti; problem with the new handling
of k_Repeat keypresses in channel switching reported by Udo Richter).
- When looking for the present or following EPG event, the running status is now
always taken into account.
- Now initializing the channels' schedule pointers when reading the epg.data file,
so that the first WhatsOn menu will come up faster.
- If a shutdown is requested, but the shutdown script doesn't actually halt the
system, it is now tried again after 5 minutes (suggested by Helmut Auer).
- Separated the 'install' target into several individual targets; renamed the
'plugins-install' target to 'install-plugins' (thanks to Helmut Auer).
|
|
- Added some missing braces in remux.c (thanks to Wayne Keer for reporting this one).
- Removed unused MAINMENUENTRY from svdrpdemo.c (thanks to Udo Richter for reporting
this one).
- Fixed appending sequence end code in cDvbPlayer::Goto() (thanks to Reinhard Nissl).
- Fixed syncing in cRepacker (thanks to Reinhard Nissl).
- Now always using stream id 0xE0 for the video stream, to avoid problems with
post processing tools that choke on different ids (suggested by Reinhard Nissl).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Fixed cDvbPlayer::SkipFrames() to properly handle radio recordings (thanks to
Reinhard Nissl).
- Updated the Swedish OSD texts (thanks to Tomas Prybil).
- Updated the Slovenian OSD texts (thanks to Matjaz Thaler).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Made LIRC command parsing more robust (thanks to Ville Skyttä).
- Introduced a separate 'plugins-install' target in the Makefile (thanks to Daniel
Thompson).
- Re-introduced the code that waits for a tuner lock in VDR/device.c, since
apparently some users actually need it. It's not active by default, you'll have
to define the WAIT_FOR_TUNER_LOCK macro in that file if you need it (suggested
by Malcolm Caldwell).
- Adjusted the Makefile to the dvb-kernel driver on kernel 2.6 and up (thanks to
Lauri Tischler).
- Repeat keys are now ignored when waiting for a keypress to cancel an operation
(thanks to Marko Mäkelä).
- The main menu function of a plugin can now be activated through a key macro of
the form "@plugin" even if that plugin doesn't have a main menu entry (using
part of a patch by Hardy Flor, which originally implemented calling plugins from
SVDRP).
- The menu timeout handling is now done centrally in the main program loop.
- Added missing help for the 'help' keyword in the SVDRP command PLUG.
- The main menu function of a plugin can now be called programmatically through
the static function cRemote::CallPlugin().
- The SVDRP command PLUG now has a new option 'main' which can be used to initiate
a call to the main menu function of a plugin (using part of a patch by Hardy Flor).
- The new command line option '--vfat' can be used to make VDR encode special
characters in recording file names, even if it wasn't compiled with VFAT=1
(suggested by Peter Bieringer). The compile time option VFAT still exists and
creates a VDR that always behaves as if it were called with '--vfat'.
- Replaced the ':' delimiter between hour and minute in recording file names with
a '.' under Linux, too. Existing recordings with ':' as delimiter will still work.
- Implemented the SVDRP command MOVC (thanks to Andreas Brachold).
- Added support for multiple audio language codes in ISO639LanguageDescriptors to
'libsi' (thanks to Marcel Wiesweg).
- Changed the audio PID language codes to hold up to two 3 letter codes, separated
by '+', to store separate languages broadcast in two channel audio mode.
- If the preferred audio language is broadcast on a PID that has two different
languages in the two stereo channels, the audio channel is now properly set when
switching to such a channel (thanks to Mogens Elneff for his help in testing this).
- Fixed some typos in MANUAL (thanks to Ville Skyttä).
- Fixed the default value for "Setup/EPG bugfix level" (thanks to Ville Skyttä for
reporting this one).
- Fixed defining timers that only differ in the day of week (thanks to Patrick
Rother for reporting this one).
- Fixed converting summary.vdr files that would result in a very long 'short text'
(thanks to Carsten Koch).
- Implemented a hash for the channels to reduce the system load in the EIT scanning
thread (based on a patch by Georg Acher).
|
|
- Fixed a race condition in cTransfer (thanks to Klaus Heppenheimer for reporting this one).
In doing so, the 'active' variables used by the actual derived cThread classes
have been replaced by the cThread::Running() function.
Plugin authors may want to check their derived cThread classes and replace any 'active'
variables the same way as, for instance, done in transfer.c.
- Fixed handling EPG data for time shifted events (thanks to Marco Schlüßler).
- Increased the default value for 'Min. user inactivity' to 300 minutes (suggested
by Helmut Auer).
- Now storing the channel id in the info.vdr file even if there is no EPG info
available (thanks to Andreas Brachold for reporting that there are empty info.vdr
files created in that case).
- Added some 'mkdir -p' to the Makefile's 'install' target (thanks to Wayne Keer).
- Changed the title of the recording info menu (thanks to Rolf Ahrenberg).
- Fixed handling the frame number display if '7' is pressed before the first editing
mark, or '9' after the last one (thanks to Thomas Günther).
- Now discarding any previous numerical input to switch channels if Up, Down, Channel+,
Channel-, Left or Right is pressed (thanks to Wolfgang Rohdewald for reporting a
problem with this).
- Pressing Ok while entering a channel number now immediately switches to that
channel, without waiting for further input.
- Avoiding unnecessary OSD draw operations caused by the audio track description
display in the ST:TNG skin's channel display (thanks to Oliver Endriss for reporting
this).
- Removed the VIDEO_STILLPICTURE_WORKS_WITH_VDR_FRAMES stuff from
cDvbDevice::StillPicture(), since apparently the VIDEO_STILLPICTURE call works.
|
|
- Added a sleep in cDvbPlayer::Action() in case there is no data to send to the
device, which avoids a busy loop on very fast machines (thanks to Martin Wache).
- Modified the description of cDevice::Poll() to avoid misunderstandings.
- Updated Croatian language texts (thanks to Drazen Dupor).
- cDvbPlayer::Goto() now appends a Sequence End Code to get the image shown
immediately with softdevices (thanks to Reinhard Nissl).
- Reactivated cVideoRepacker in remux.c after some fixes (thanks to Reinhard Nissl).
- Removed the fix for handling VPS timers, so that they only record if the event
they are assigned to actually has the given VPS time. This has caused repeating
VPS timers to stop recording prematurely.
- Avoiding duplicate components in EPG events when reading epg.data or in the
PUTE SVDRP command (thanks to Olaf Titz for reporting this one).
- Added the command line options '--lirc', '--rcu' and '--no-kbd' to allow setting
the remote control at runtime (based on a patch by Darren Salt).
- Now checking whether timers or channels are currently being edited via the menu
before making changes through SVDRP (thanks to Andreas Brugger for reporting a
problem with this).
- Files and directories are now created with rights according to the shell's
umask settings (thanks to Andreas Brachold).
- Fixed the cChannel copy constructor (thanks to Marcel Wiesweg for pointing out
a problem with it).
- Fixed an out-of-bounds memory access with audio language ids (thanks to
Matthias Lenk for reporting, and Udo Richter for suggesting a fix).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added missing storing of the MenuScrollPage parameter (thanks to Frank Krömmelbein).
- Added cRemux::SetTimeouts() for better use of cRemux in a single thread (thanks
to Udo Richter for reporting a problem with this).
- Modified cEITScanner::Process() so that it uses the primary device if it is
replaying and is the only device that provides the given transponder, and that
a forced EPG scan works even if EPG scan timeout is set to 0 (thanks to
Bernhard Stegmaier for reporting a problem with this).
- Fixed cDvbSpuBitmap::putPixel() (thanks to Reinhard Nissl).
- Fixed setting system time to avoid time jumps in case of faulty data (thanks
to Andreas Böttger).
- Fixed a memory leak in the SVDRP command LSTE (thanks to Stefan Huelswitt).
|
|
- Making sure at least the default skin is available at program start in case a
plugin needs to issue an error message (thanks to Achim Tuffentshammer for
reporting a crash in such a case). Also checking if there is a current skin
in cSkins::Message().
- Completed the Finnish OSD texts and fixed internationalization of the text
for "Setup/DVB/Audio language(s)" (thanks to Rolf Ahrenberg).
- Completed the Estonian OSD texts and switched to iso8859-13 character set
(thanks to Arthur Konovalov).
- Made cCondWait::SleepMs() sleep at least 3ms to avoid a possible busy wait.
- Fixed canceling the LIRC thread (thanks to Marco Schlüßler for pointing out
this one).
- The "Green" button in the "Main" menu is now always "Audio", since the audio
channel might be changed even if there is only one actual audio PID.
- Fixed handling the '-E' option which was broken in version 1.3.18 (thanks to
Christian Jacobsen for reporting this one).
- Added 'channels.conf.terr' entries for Mainz (thanks to Michael Heyse).
- Implemented cDolbyRepacker for better handling of Dolby Digital PES packets
(thanks to Reinhard Nissl).
- Fixed playing files with PES packets longer than 2048 byte through the full
featured DVB card (thanks to Marco Kremer for reporting this one and providing
a test sample).
- Recording and Transfer Mode now handle more than 2 audio PIDs. For this the
interfaces of the following functions have been changed:
cTransferControl::cTransferControl()
cTransfer::cTransfer()
cRecorder::cRecorder()
cReceiver::cReceiver()
cRemux::cRemux()
- Fixed a possible race condition in cDevice::Action() and cTSBuffer::Action()
(thanks to Stefan Huelswitt).
- Extended some buffer sizes to allow handling HDTV streams (thanks to Reinhard
Nissl).
- Added 'channels.conf.terr' entries for Düsseldorf and Köln (thanks to Walter Koch).
- Falling back to 'stereo' when switching channels in case the user had switched
to 'left' or 'right' (suggested by Rolf Groppe).
- Completed the Danish OSD texts (thanks to Mogens Elneff).
- Recording and Transfer Mode can now handle up to 8 Dolby Digital tracks (thanks
to Marco Schlüßler for a patch that implements substream handling into
cDevice::PlayPesPacket(), and Reinhard Nissl for adding substream handling to
cDolbyRepacker).
- Added PlayPes(NULL, 0) to cTransfer::Action() when clearing the transfer buffer
to avoid overflows (thanks to Marco Schlüßler for pointing this out).
|
|
- Removed an unused variable from cTimer::GetWDayFromMDay() (thanks to Wayne Keer
for reporting this one).
- Some more changes to the 'childTid' handling in cThread (based on suggestions by
Stefan Huelswitt).
- Fixed the spelling of 'canceling' (thanks to Wayne Keer for reporting this one).
- Re-introduced a sleep to cDvbPlayer::Action() to avoid high CPU load in still
picture mode (thanks to Reinhard Nissl for reporting this one).
- Fixed a possible race condition in generating the DVB device names (thanks to
Rainer Zocholl for reporting this one).
- Changed the way PES packets are played to allow replay of AC3 sound over the
full featured DVB cards (partially based on a patch from Werner Fink).
+ The new function cDevice::PlayPes() is now called with the complete PES data
stream and calls PlayVideo() and PlayAudio() as necessary.
+ cDevice::PlayVideo() is now only called with actual video PES packets.
+ cDevice::PlayAudio() is now called with the actual audio PES packets, which
can be either "normal" audio or AC3 data. You need at least firmware version
0x261d to replay AC3 sound over a full featured DVB card. This function now
has an 'int' return value.
+ PlayAudio() of derived cDevice classes shall no longer call the base class
function. It shall just play the given data as audio.
+ cPlayer::PlayVideo() and cPlayer::PlayAudio() are now obsolete and have been
replaced with cPlayer::PlayPes().
+ All StripAudioPackets() functions are now obsolete. The functionality has been
moved into cDevice::PlayPes(), where only the video and audio packets that are
actually required will be processed.
+ All audio track handling is now done by cDevice; cTransfer and cDvbPlayer no
longer care about audio tracks. cPlayer, however, still has the virtual hooks
for audio track handling in order to allow plugins to implement players that
have their own idea about this.
+ cChannel::[AD]pid[12]() have been replaced with cChannel::[AD]pid(int i) to
allow access to all available PIDs.
- Escaped the '-' and 'ö' characters in the man pages (thanks to Darren Salt for
pointing this out).
- Completed the Italian OSD texts (thanks to Sean Carlos).
- Fixed setting 'synced' in cRemux when recording radio channels (thanks to
Laurence Abbott).
- Removed the LOCK_THREAD from the LIRC thread (thanks to Ludwig Nussel).
- Fixed genfontfile.c (sometimes the character width was wrong, and the codes were
shifted one too far to the left).
- Fixed the character width and shifted the codes one to the right in all font
files.
- Renamed font???.c to font???-iso8859-1.c for symmetry.
- Switched the character set to iso8859-15 for English, German and Finnish (thanks
to Andreas Brugger for reporting the missing Euro sign in iso8859-1).
- Added 'channels.conf.terr' entries for Lübeck (thanks to Stefan Hußfeldt).
- Fixed a race condition in starting a thread (thanks to Reinhard Nissl for
reporting this one).
- Replaced non-threadsafe library functions with their threadsafe versions (thanks
to Rainer Zocholl for pointing this out).
- Other non-threadsafe functions have been replaced by threadsafe classes that hide
the actual buffering. In particular these are:
readdir() -> cReadDir
readline() -> cReadLine
- Several formerly non-threadsafe functions now have a return type of cString:
cChannel::ToText()
tChannelID::ToString()
cEvent::GetDateString()
cEvent::GetTimeString()
cEvent::GetEndTimeString()
cEvent::GetVpsString()
cMark::ToText()
cTimer::ToText()
cSource::ToString()
cTimer::PrintDay()
cTimer::PrintFirstDay()
PrefixVideoFileName()
IndexToHMSF()
ChannelString()
strescape()
AddDirectory()
itoa()
WeekDayName()
DayDateTime()
When using these functions in a 'const char *' context there is nothing special
to consider, except that you can no longer have a pointer to the return value,
as in
const char *date = DayDateTime();
Although this will compile without error message, the resulting 'date' will not
be valid after this line. Use this instead:
cString date = DayDateTime();
In a 'const void *' context (as in printf() etc.) the result needs to be
dereferenced with a '*', as in
printf("%s", *DayDateTime());
to make it a 'const char *'.
- Removed delay_ms(), using cCondWait::SleepMs() instead.
- Replaced time_ms() with a threadsafe and non-overflowing cTimeMs (thanks to Rainer
Zocholl for pointing out this problem).
- Added cDevice::mutexReceiver to avoid a race condition when attaching/detaching
receivers from different threads.
- The new remote control button "Audio" can be used to switch between different
audio tracks. The "Green" button in the "Main" menu has been changed from "Language"
to "Audio", since it now also controls switching between normal and Dolby Digital
audio tracks (see MANUAL for details).
- The description of the audio tracks is now taken from the "component descriptors"
that are broadcast in the EPG data. However (as no big surprise), not all channels
actually provide useful data here, so there are now some additional EPG bugfixes,
which can be activated by setting the "EPG bugfix level" to 3.
- The format of the 'epg.data' files has been extended by the new tag 'X', which
contains the stream components of an event (see man vdr(5) for details).
- The cStatus class now has the new member function SetAudioTrack(), which can be
used to get notified when the audio track has been switched, and the new member
function SetAudioChannel() which is called when the audio channel is changed.
- Skins need to implement the new cSkinDisplayTrack class to display the audio
track menu.
- The ST:TNG skin now displays the current audio track description (if any) at the
botton left side.
- The new setup option "DVB/Audio languages" can be used to control which audio
language shall be selected in case a channel broadcasts in different languages
(see MANUAL for details).
- The "Left" and "Right" keys in the "Audio" menu can be used to switch between
the left and right stereo channels in case there are different audio tracks
in these channels (see MANUAL for details).
- Fixed a possible race condition in cDevice::Action() (thanks to Mattias Grönlund).
- Fixed the default quality value when grabbing a JPEG image (thanks to Patrick
Gleichmann).
- Fixed deleting a menu item in case the next item is not selectable (thanks to
Dino Ravnic).
- Implemented displaying mandatory subtitles in the SPU decoder (thanks to Marco
Schlüßler).
- The setup option "Recording/Record Dolby Digital" has been renamed and moved to
"DVB/Use Dolby Digital". It now controls whether Dolby Digital is recorded and
whether an available DD audio track will appear in the "Audio" menu.
- Added support for circular polarization (thanks to Jonan Santiago).
- Thanks to Werner Fink, Reinhard Nissl, Sascha Volkenandt and Bjørnar Nilsen for
their support in testing and fine tuning this version.
|
|
- Changed thread handling to make it work with NPTL ("Native Posix Thread Library").
Thanks to Jon Burgess, Andreas Schultz, Werner Fink and Stefan Huelswitt.
- The cThread class now accepts a 'Description' parameter, which is used to log
the beginning and end of the thread, together with its process and thread id.
For descriptions that need additional parameters you can use the function
cThread::SetDescription(), which accepts 'printf()' like arguments.
Existing plugins that use threads should be changed to use this functionality
instead of explicit 'dsyslog()' calls inside their Action() function in order
to support logging the thread ids.
- Added "Slovak Link" and "Czech Link" to 'ca.conf' (thanks to Emil Petersky).
However, 'ca.conf' is now pretty much obsolete due to the automatic CA handling.
- Mutexes are now created with PTHREAD_MUTEX_ERRORCHECK_NP, which makes the
'lockingTid' stuff obsolete (thanks to Stefan Huelswitt).
- Changed font handling to allow language specific character sets.
- Adopted the small font character set from the "Elchi" patch (originally
provided by Alessio Sangalli).
- Greek language texts now use iso8859-7 character set (thanks to Dimitrios
Dimitrakos).
- Rearranged section data handling, so that the actual data handling can be done
separately, even from within plugins.
- The EPG data structures have been moved from eit.[hc] to epg.[hc] and have been
adapted to the general VDR coding style. Plugins that use these data structures
may need to change some function names (which should be obvious).
The name 'subtitle' has been changed to 'shortText' to avoid clashes with actual
subtitles that are part of a movie. The name 'extendedDescription' has been
shortened to 'description'.
- Replaced 'libdtv' with 'libsi' (thanks to Marcel Wiesweg), which is thread
safe and can be used by multiple section filters simultaneously.
- Added 'cRwLock' to 'thread.[hc]'. Note that all plugin Makefiles need to
define _GNU_SOURCE for this to work (see the example plugin Makefiles and
'newplugin').
- Fixed a problem with crc32 in SI handling on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Fixed an alignment problem in CAM access on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Added 'StreamType' setting to CAM communication, which is important for
Aston/SECA CAMs (thanks to Antonino Sergi).
- Now the CA descriptors are sent to the CAM in the 'program' or 'ES level'
sections, depending on where they are found in the PMT (thanks to Hans-Peter
Raschke for reporting this one). This should make SkyCrypt CAMs work.
- Now using the 'version number' of EPG events to avoid unnecessary work.
- Channel data is now automatically derived from the DVB data stream (inspired
by the 'autopid' patch from Andreas Schultz).
- The current channel is now automatically re-tuned if the PIDs or other settings
change. If a recording is going on on a channel that has a change in its
settings, the recording will be stopped and immediately restarted to use the
new channel settings.
- EPG events now use the complete channel ID with NID, TID and SID.
- Channel names in 'channels.conf' can now have a short form, as provided
by some tv stations (see man vdr(5)). Currently channels that provide short
names in addition to long ones are listed in the OSD as "short,long name",
as in "RTL,RTL Television". The short names will be used explicitly later.
- The Ca parameter in 'channels.conf' has been extended and now contains all the
CA system ids for the given channel. When switching to a channel VDR now tests
for a device that provides one of these CA system ids. The devices automatically
get their supported ids from the CI handler.
- The values in 'ca.conf' are currently without any real meaning. Whether or not
a channel with conditional access can be received is now determined automatically
by evaluating its CA descriptors and comparing them to the CA system ids
provided by the installed CAM. Only the special values 1-16 are used to assign
a channel to a particular device.
- Increased the maximum number of possible OSD colors to 256.
- Limited the line length in the EPG bugfix report, which appears to fix a buffer
overflow that caused a crash when cleaning up the EPG data (at 05:00 in the
morning).
|
|
- Fixed detecting broken connection to the LIRC daemon (thanks to Ludwig Nussel).
- Now sending CA descriptors to the CAM in the same sequence as they were originally
received (thanks to Stefan Huelswitt).
- The PCR PID can now be set separately from the video PID. The syntax in the
'channels.conf' file is, for example, ...:164+17:..., where 164 is the video PID
and 17 is the PCR PID. The separator is a '+' sign, not a comma or semicolon as
with the audio PIDs, because this is not an alternate PID, but rather an
additional, necessary PID. In order to use this feature you need a driver version
dated 2003-04-27 or higher (setting the PCR PID didn't work in earlier versions).
- Fixed deleting the last recording in the "Recordings" menu, which started pausing
live video (thanks to Christoph Friederich for reporting this one).
- Now setting the "broken link" flag for GOPs at the beginning of a new video
sequence, which avoids artefacts when cutting (thanks to Stefan Huelswitt).
- Removed the Mute() call from cDvbDevice::StillPicture() (suggested by Andreas
Schultz).
- Updated 'channels.conf.terr' for Berlin (thanks to Andreas Brachold).
- Extended logging info when starting/stopping timers to show the channel number,
start/stop time and the file name (suggested by Manuel Hartl).
- Added a note regarding non-VDR files in the /videoX directories to INSTALL
(suggested by Benjamin Harling).
- Skipping keys that come in too fast from LIRC (thanks to Christian Jacobsen).
- Avoiding short display of the main menu if a plugin displays its own OSD and
is started through a user defined key macro (thanks to Andreas Mair for reporting
this one).
- Reduced the time to wait for EPG data when starting a recording to 3 seconds.
- The new SVDRP command STAT can be used to request information about the disk
usage (thanks to Thomas Koch).
- Fixed faulty calculation of section length in eit.c (thanks to Teemu Rantanen).
|
|
- The CAM is now accessed only if the current channel actually has a non-zero Ca
value, and CAM access is completely suppressed during replay, which avoids
problems in case the CAM is attached to the primary DVB device.
- The "Left" and "Right" buttons now set the cursor to the first or last list item
even if the list consist only of a single page, like, for instance, the Main menu
(thanks to Oliver Endriss).
- Made the log message "OSD window width must be a multiple of 4..." a debug message
instead of an error message, so it can be avoided by using a log level less than 3.
- Updated Greek language texts (thanks to Dimitrios Dimitrakos).
- Fixed faulty behaviour of the "Mute" key in case the channel display is visible
(thanks to Florian Bartels for reporting this one and Sascha Volkenandt for
helping to fix it).
- Modified LOF handling to allow for C-band reception (thanks to Malcolm Caldwell).
- Added some missing cAudio handling calls (thanks to Werner Fink).
- Replaced the 'for' loops in StripAudioPackets() with memset() calls (thanks to
Werner Fink).
- Further increased the timeout until an index file is considerd no longer to be
written.
- Fixed a crash in case the index file can't be accessed any more during replay
(thanks to Stefan Huelswitt for reporting this one).
- Fixed displaying messages in the status line in case they exceed the OSD width
(thanks to Gerhard Steiner for reporting this one).
- Avoiding high CPU load in case the connection to LIRC gets lost (thanks to
Ludwig Nussel).
- Fixed handling repeat function with LIRC (thanks to Ludwig Nussel).
- Fixed handling min/max borders when entering integer values (thanks to Andy
Grobb for reporting this one).
- Implemented a "resume ID" which allows several users to each have their own
resume.vdr files (thanks to Martin Hammerschmid). This parameter can be set in
the "Setup/Replay" menu (see MANUAL for details).
- Now using 'libdtv' version 0.0.5 (thanks to Rolf Hakenes for the new version
and Stefan Huelswitt for adapting VDR to it).
- If no device with an MPEG decoder can be found at startup, the first device
is now used as primary device (just to have some device).
- Adjusted some Premiere channels in 'channels.conf' (thanks to Thomas Koch).
- Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt).
- The 'epg.data' file is now read after all plugins have been started (thanks
to Sascha Volkenandt).
- The LIRC remote control no longer tries to learn keys if it can't connect to
the LIRC daemon (thanks to Ludwig Nussel for reporting this one). The same
applies to the RCU remote control in case of errors during startup.
- Fixed handling of Ca parameters with values <= MAXDEVICES, which don't indicate
an actual encrypted channel (thanks to Stefan Huelswitt for reporting this one).
|
|
- Fixed an incomplete initialization of the filter parameters in eit.c (thanks
to Jeremy Hall).
- Fixed the 'newplugin' script for use with the NEWSTRUCT driver (thanks to
Andreas Schultz for reporting this one). If you have already created a plugin
directory and Makefile with 'newplugin', please apply the following patch to it:
-------------------------------------------------------
--- Makefile 2002/06/10 16:24:06 1.4
+++ Makefile 2002/09/17 15:36:36 1.5
@@ -15,7 +15,12 @@
### The directory environment:
+ifdef NEWSTRUCT
+DVBDIR = ../../../../DVB/include
+DEFINES += -DNEWSTRUCT
+else
DVBDIR = ../../../../DVB/ost/include
+endif
VDRDIR = ../../..
VDRINC = $(VDRDIR)/include
LIBDIR = ../../lib
@@ -34,7 +39,7 @@
INCLUDES = -I$(VDRINC) -I$(DVBDIR)
-DEFINES = -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
+DEFINES += -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
### The object files (add further files here):
-------------------------------------------------------
This is the diff for the 'setup' example that comes with VDR, so your line
numbers may be different.
- Added a missing 'public' keyword in device.h (thanks to Martin Hammerschmid).
- Fixed a race condition when starting 'Transfer Mode'.
- Rearranged the remote control key handling to allow plugins to implement
additional types of remote controls (see PLUGINS.html, section "Remote Control").
The previously used files 'keys.conf' and 'keys-pc.conf' have been replaced
by the file 'remote.conf', which holds the key definitions of all remote controls.
- The LIRC remote control keys are now handled just like the keyboard and RCU keys.
This means that you can use the lircd.conf file as is for your remote control,
without the need of editing it to make the key names the same as used in VDR.
When first starting VDR it will go into the "Learning keys" mode and ask you
to press the various keys. The resulting key assignment will be stored in
the file 'remote.conf'.
Since I have no way of testing the LIRC support, I hope I didn't break it in
the process...
- While learning the remote control keys it is now possible to press the 'Menu'
key to skip the definition of keys that are not available on your particular
RC unit.
- Fixed handling DVD subtitles in the SPU decoder (thanks to Andreas Schultz).
- Avoiding restarts due to 'panic level' when switching channels on the primary
device during EPG scan.
|
