| Age | Commit message (Collapse) | Author |
|---|
|
- Fixed reading the EPG preferred language parameter from 'setup.conf'.
- Fixed switching to a visible programme in case the current channel has neither
a video nor an audio PID.
- Fixed editing channels (SID now range checked) and creating new channels (NID,
TID and RID are now set to 0).
- Fixed transponder handling to make it work with satellites that provide two
transponders on the same frequency, with different polarization, like Hispasat
at S30.0W (thanks to Thomas Bergwinkl for pointing this out). See man vdr(5)
for details about the enhanced channel ID format.
- Since there appears to be no general solution for the UPT error yet, a recording
now initiates an "emergency exit" if the number of UPT errors during one
recording exceeds 10 (suggested by Gregoire Favre). Since the UPT error doesn't
happen on my system, this has not been explicitly tested.
The "preliminary fix" for the UPT error in VDR/dvbdevice.c has been disabled
by default, since it makes channel switching unpleasently slow. If you want
to have that workaround back, you can uncomment the line
//#define WAIT_FOR_LOCK_AFTER_TUNING 1
in VDR/dvbdevice.c.
- Adapted the 'sky' plugin to use the actual channel IDs, and to fetch EPG data
from www.bleb.org.
- Limited automatic retuning to devices that actually provide the transponder
(necessary for the 'sky' plugin).
- Fixed handling receivers in the 'sky' plugin, so that a recording on the same
channel won't interrupt an ongoing Transfer Mode.
- Added subtable ID and TSDT handling to 'libsi' (thanks to Marcel Wiesweg).
- Fixed some Russian OSD texts (thanks to Vyacheslav Dikonov).
- Added the 'running status' to the EPG events. This is necessary for implementing
the VPS function for recording.
- Removed the obsolete 'present' and 'following' handling from the EPG data.
- The EPG data is now always kept sorted chronologically in the internal data
structures. This also means that any EPG data retrieved through the SVRDP
command LSTE is guaranteed to be sorted by start time.
- Now using the 'running status' in the channel display, so that a programme
that has an end time that is before the current time, but is still running,
will still be shown in the display (provided the broadcasters handle the
'running status' flag correctly). This also applies to programmes that have
a start time that is in the future, but are already running.
- Implemented an "EPG linger time", which can be set to have older EPG information
still displayed in the "Schedule" menu (thanks to Jaakko Hyvätti).
- Added PDCDescriptor handling to 'libsi'.
- Implemented handling the VPS timestamps (aka "Programme Identification Label")
for full VPS support for timers (provided the tv stations actually broadcast
this information). The VPS time is displayed in the event info page if it exists
and is different than the event's start time.
- Extended the SVDRP command LSTE to allow limiting the listed data to a given
channel, the present or following events, or events at a given time (thanks to
Thomas Heiligenmann).
- Fixed a typo in libsi/si.h (thanks to Stéphane Esté-Gracias).
- Timers can now be set to use the VPS information to control recording a programme.
The new setup options "Recording/Use VPS" and "Recording/VPS margin", as well as
the "VPS" option in the individual timers, can be used to control this feature
(see MANUAL for details).
Note that this feature will certainly need a lot of testing before it can be
called "safe"!
- The "Schedule" and "What's on now/next?" menus now have an additional column
which displays information on whether there is a timer defined for an event,
whether an event has a VPS time that's different than its start time, and
whether an event is currently running (see MANUAL under "The "Schedule" Menu"
for details).
|
|
- Changed thread handling to make it work with NPTL ("Native Posix Thread Library").
Thanks to Jon Burgess, Andreas Schultz, Werner Fink and Stefan Huelswitt.
- The cThread class now accepts a 'Description' parameter, which is used to log
the beginning and end of the thread, together with its process and thread id.
For descriptions that need additional parameters you can use the function
cThread::SetDescription(), which accepts 'printf()' like arguments.
Existing plugins that use threads should be changed to use this functionality
instead of explicit 'dsyslog()' calls inside their Action() function in order
to support logging the thread ids.
- Added "Slovak Link" and "Czech Link" to 'ca.conf' (thanks to Emil Petersky).
However, 'ca.conf' is now pretty much obsolete due to the automatic CA handling.
- Mutexes are now created with PTHREAD_MUTEX_ERRORCHECK_NP, which makes the
'lockingTid' stuff obsolete (thanks to Stefan Huelswitt).
- Changed font handling to allow language specific character sets.
- Adopted the small font character set from the "Elchi" patch (originally
provided by Alessio Sangalli).
- Greek language texts now use iso8859-7 character set (thanks to Dimitrios
Dimitrakos).
- Rearranged section data handling, so that the actual data handling can be done
separately, even from within plugins.
- The EPG data structures have been moved from eit.[hc] to epg.[hc] and have been
adapted to the general VDR coding style. Plugins that use these data structures
may need to change some function names (which should be obvious).
The name 'subtitle' has been changed to 'shortText' to avoid clashes with actual
subtitles that are part of a movie. The name 'extendedDescription' has been
shortened to 'description'.
- Replaced 'libdtv' with 'libsi' (thanks to Marcel Wiesweg), which is thread
safe and can be used by multiple section filters simultaneously.
- Added 'cRwLock' to 'thread.[hc]'. Note that all plugin Makefiles need to
define _GNU_SOURCE for this to work (see the example plugin Makefiles and
'newplugin').
- Fixed a problem with crc32 in SI handling on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Fixed an alignment problem in CAM access on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Added 'StreamType' setting to CAM communication, which is important for
Aston/SECA CAMs (thanks to Antonino Sergi).
- Now the CA descriptors are sent to the CAM in the 'program' or 'ES level'
sections, depending on where they are found in the PMT (thanks to Hans-Peter
Raschke for reporting this one). This should make SkyCrypt CAMs work.
- Now using the 'version number' of EPG events to avoid unnecessary work.
- Channel data is now automatically derived from the DVB data stream (inspired
by the 'autopid' patch from Andreas Schultz).
- The current channel is now automatically re-tuned if the PIDs or other settings
change. If a recording is going on on a channel that has a change in its
settings, the recording will be stopped and immediately restarted to use the
new channel settings.
- EPG events now use the complete channel ID with NID, TID and SID.
- Channel names in 'channels.conf' can now have a short form, as provided
by some tv stations (see man vdr(5)). Currently channels that provide short
names in addition to long ones are listed in the OSD as "short,long name",
as in "RTL,RTL Television". The short names will be used explicitly later.
- The Ca parameter in 'channels.conf' has been extended and now contains all the
CA system ids for the given channel. When switching to a channel VDR now tests
for a device that provides one of these CA system ids. The devices automatically
get their supported ids from the CI handler.
- The values in 'ca.conf' are currently without any real meaning. Whether or not
a channel with conditional access can be received is now determined automatically
by evaluating its CA descriptors and comparing them to the CA system ids
provided by the installed CAM. Only the special values 1-16 are used to assign
a channel to a particular device.
- Increased the maximum number of possible OSD colors to 256.
- Limited the line length in the EPG bugfix report, which appears to fix a buffer
overflow that caused a crash when cleaning up the EPG data (at 05:00 in the
morning).
|
|
- Fixed a bug in channel switching after Left/Right has been pressed (thanks to
Michael Walle for reporting this one).
- Improved channel switching in case of numerical input by switching as soon as
the channel is unique (suggested by Jaakko Hyvätti).
- Fixed creating a new channel in the "Channels" menu in case the 'channels.conf'
contains ':@nnn' lines with no text (thanks to Guy Roussin for reporting this
one).
- Changed the behaviour of the '0' key in normal viewing mode so that a channel
only qualifies as "previous" if it has been selected for at least 3 seconds
(suggested by Thomas Keil).
- Now clearing the channel info display when entering numeric keys to switch
channels (suggested by Guy Roussin).
- Added missing I18N entry for "Ppid" (thanks to Rolf Ahrenberg).
- Fixed handling the color buttons in the "Edit channel" menu (thanks to Thomas
Keil for reporting this one).
- Fixed an occasional "Broken pipe" error in SVDRP connections (thanks to Gerhard
Steiner for reporting this one).
- Fixed checking CA capabilities with the dvb-kernel driver (thanks to Kenneth
Aafløy).
- Fixed selecting the device, because sometimes an FTA recording terminated a
CA recording (thanks to Emil Naepflein).
- Fixed a possible crash in case a VFAT file system is used without compiling VDR
with VFAT=1 (thanks to Ernst Fürst for reporting this one).
- Now the program uses the values of VIDEODIR and PLUGINDIR defined in Makefile
or Make.config as defaults (thanks to Steffen Barszus).
- Added the usual menu timeout to the CAM menus.
|
|
- Modified handling of audio packets in cDvbPlayer for better sync with external
AC3 replay (thanks to Werner Fink).
- Fixed a memory leak in cNonBlockingFileReader (thanks to Stefan Huelswitt).
- Completed the French OSD texts (thanks to Gregoire Favre).
- Completed the Finnish OSD texts (thanks to Niko Tarnanen and Rolf Ahrenberg).
- Fixed I/O handling in case an explicit controlling terminal is given (thanks
to Oliver Endriss).
- Fixed resume file handling in case the resume.vdr file can't be written
(thanks to Gerhard Steiner).
- Fixed cutting a recording if there is only a single editing mark (thanks to
Ralf Klueber for reporting this one).
- Fixed volume display in case a plugin has its own OSD open (thanks to Marcel
Wiesweg).
- Fixed channel switching in the EPG scanner on single device systems.
- Completed the Swedish OSD texts (thanks to Tomas Prybil).
- Now switching to the channel used by the most recently started timer in case
the original current channel becomes unavailable due to a recording on a
different transponder. If this fails, a channel up/down switch is attempted as
a fallback solution (thanks to Lauri Tischler for reporting this one, and to
Hermann Gausterer for suggesting to switch to the recording channel).
- Fixed cReplayControl::Show() to avoid a compiler warning in g++ 3.2.3 (thanks
to Jan Ekholm for reporting this one).
- Completed the Slovenian OSD texts (thanks to Matjaz Thaler).
- Changed the DEFAULTPRIORITY in device.c to -1, so that the primary device
will be used for FTA recordings in case the CAM is connected to a non-primary
device (thanks to Reinhard Walter Buchner for reporting this one).
- The cCiHandler now closes its file handle when it gets destroyed.
- Checking for duplicate recordings with the same file name and disabling the
second timer (thanks to Peter Bieringer for reporting this one).
- Fixed handling newly created timers in case they are not confirmed with "Ok"
(thanks to Gerhard Steiner for reporting this one).
- It is now possible to directly delete a timer that is currently recording
(thanks to Alexander Damhuis for reporting this one).
|
|
- Introduced the new function cPlugin::Initialize(), in order to be able to separate
the startup of a plugin into an "early" (Initialize()) and "late" (Start()) phase
(suggested by Andreas Schultz). Plugin authors should please read the section
about "Getting started" in PLUGINS.html and adapt their code if applicable.
- Implemented the CableDeliverySystemDescriptor and TerrestrialDeliverySystemDescriptor
in libdtv (thanks to Sven Grothklags and Andreas Schultz).
- Fixed keeping live video active in case the primary device doesn't have an MPEG
decoder (thanks to Wolfgang Goeller for reporting this one).
- Implemented cDevice::ActualDevice(), which returns the actual receiving device in
case of 'Transfer Mode', or the primary device otherwise. This may be useful for
plugins that want to attach a cReceiver to the device where the current live video
is actually coming from.
- Added VDRVERSNUM to config.h, which can be used by the preprocessor to check the
actual VDR version (suggested by Stefan Huelswitt).
- Removed the WaitForPut/WaitForGet stuff from cRingBuffer, since it appears to
no longer be necessary due to the implementation of cNonBlockingFileReader in
dvbplayer.c. Also, the long timeout in WaitForPut caused problems with cReceivers
that use a ring buffer and didn't immediately return from their Receive() function
if the buffer runs full (thanks to Sascha Volkenandt for reporting this one).
- Fixed handling EPG data where the "extended event descriptor" comes before the
"short event" or a "time shifted event" (thanks to Jonan Santiago).
- Disabled the "Received stuffing section in EIT" log message.
- Updated 'channels.conf.terr' for Berlin (thanks to Juri Haberland).
- Avoiding short display of the "Main" menu when pressing the "Recordings" button
or the "Back" button during replay.
- Further increased the timeout until an index file is considerd no longer to be
written.
- Implemented separate PausePriority and PauseLifetime parameters for the recordings
created when pausing live video (suggested by Alfred Zastrow).
- Changed C++ style comments in libdtv into C style to avoid warnings in gcc 3.x
(thanks to Andreas Schultz).
|
|
- Using masks in EIT filtering to reduce the number of filters (thanks to Andreas
Schultz).
- Fixed handling Ca descriptors (thanks to Stefan Huelswitt).
- Now only those Ca descriptors are sent to a CAM that are actually understood
by that CAM.
- Re-enabled CAM communication during replay and on non-Ca channels. This requires
a DVB driver with firmware version 2613 or later.
- It is now possible to do simultaneous recording and replay with a single DVB
card, even with encrypted channels. This requires the use of the Link Layer
firmware, version 2613 or higher; the -icam firmware is still limited to live
encrypted channels only. Finally we have time shift for encrypted channels on
single card systems!
- Enhanced detection of pending user I/O from CAMs to avoid sluggish reaction
to remote control keypresses.
- Implemented "pause live video". You can now press "Menu/Yellow" or "Pause" on
your remote control while watching live video to start an instant recording
of the current programme and immediately start replaying that recording.
|
|
- Added 'Hrvatska radiotelevizija' and 'RTV Slovenija' to ca.conf (thanks to
Paul Gohn).
- Implemented actual user input for CAM enquiry menus.
- Since disk file systems apparently don't honor the O_NONBLOCK flag to read from
a file in non-blocking mode the cDvbPlayer now uses a non blocking file reader
class to make sure replay remains smooth even under heavy system load.
- Increased the maximum possible packet size in remux.c to avoid corrupted streams
with broadcasters that send extremely large PES packets (thanks to Teemu Rantanen).
- Added TS error checking to remux.c (thanks to Teemu Rantanen).
- Modified cRingBufferLinear to avoid excessive memmove() calls in 'Transfer Mode'
and during recordings, which dramatically reduces CPU load. Thanks to Teemu
Rantanen for pinpointing the problem with the excessive memmove() calls.
- Updated 'channels.conf' (thanks to Achim Lange).
- Added/improved Swedish language texts (thanks to Jan Ekholm).
- Fixed the description of the "Scroll pages" OSD setup parameter ('yes' and 'no'
were mixed up).
- Fixed handling the LOG_LOCALn parameters in the -l option (thanks to Dimitrios
Dimitrakos).
- Changed EIT processing to always read a full section.
- Fixed handling user defined CFLAGS in libdtv/libvdr/Makefile (thanks to Clemens
Kirchgatterer and Robert Schiele).
- Fixed skipping unavailable channels in the EPG scanner.
|
|
- Fixed the 'channels.conf' entries for "Studio Universal" and "Disney Channel".
- Fixed handling channels in the "Channels" menu in case there are ':@nnn' group
separators without names (thanks to Guy Roussin for reporting this one).
- The SVDRP command CHAN now also accepts channel IDs.
- Increased the timeout until an index file is considerd no longer to be written
(sometimes in time shift with heavy system load the index file was closed too
early by the replay thread).
- Implemented "Link Layer" based CAM support, which hopefully will solve the
problems with CAMs we had in the past. To use this you need the driver version
2002-01-08 or higher (with the new firmware supporting the "Link Layer" protocol).
- Added an EPG bugfix that moves the Subtitle data to the Extended Description in
case the latter is empty and the Subtitle exceeds some useful length.
- Since several channels put very long strings into the Subtitle part of their
EPG data, that string is now limited in length when used in a recording's
file name.
|
|
- Fixed missing initialization of 'number' in cChannel (thanks to Martin Hammerschmid
for reporting this one).
- Fixed a misplaced ')' in the fix about the stale lock files (thanks again to
Oliver Endriss for pointing this out - it was my fault).
- Group delimiters in the 'channels.conf' file that have no text (like a simple ":"
or ":@201") no longer show up in the Channels menu (suggested by Guy Roussin).
- Added "Tele 5" to 'channels.conf' (thanks to Georg Hitsch).
- Changed the source directory name for plugins from 'SRC' to 'src' (suggested by
Clemens Kirchgatterer).
- Removed transponders 10788, 11739 and 12266 from 'channels.conf' (apparently they
are no longer active).
- Deactivated some templates in tools.h in case some plugin needs to use the STL
(suggested by Gerald Berwolf).
- Timers now accept channel IDs even if the 'source' is 0 (thanks to Stefan Huelswitt
for reporting this one).
- Now taking an active SVDRP connection into account when doing shutdown or
housekeeping (suggested by Emil Naepflein).
- Macros in 'keymacros.conf' can now use "@plugin" to directly access the main menu
function of a given plugin (see man vdr(5) for details).
- The new plugin 'sky' can be used to integrate a Sky Digibox into the VDR system,
using a Kfir MPEG2 encoder card (see PLUGINS/src/sky/README for details).
|
|
- Added new entries to 'ca.conf'.
- Fixed closing unused PID handles (thanks to Stefan Schluenss for reporting this
one).
- Added more examples to 'diseqc.conf' (thanks to Oliver Endriss).
- Fixed disabling multiple recordings on a single DVB card (comment out the definition
of the macros DO_REC_AND_PLAY_ON_PRIMARY_DEVICE and DO_MULTIPLE_RECORDINGS in
dvbdevice.c).
- Plugins can now have their very own OSD setup in the object they return from
a call to cPlugin::MainMenuAction(). In order to implement this, the return type
of cPlugin::MainMenuAction() had to be changed from (cOsdMenu *) to (cOsdObject *).
So in case you are compiling an existing plugin with this version of VDR and you
get an error message, simply change cOsdMenu to cOsdObject in the plugin's source
for the MainMenuAction() function.
Plugin authors who have so far (ab)used the cControl mechanism to implement their
own raw OSD should take a look at the new demo plugin 'osddemo'. It implements
a very primitive game that shows how a plugin can have its own raw OSD. Especially
look into cLineGame and see how it implements the Show() function. See also
the chapter on "User interaction" in PLUGINS.html.
- Added three new fields to the lines in 'channels.conf': NID, TID and RID. NID and
TID are the Network and Transport Stream IDs, respectively. RID is an additional ID
that can be used to tell apart channels that would otherwise be indistinguishable.
This is typically the case with radio channels, which may have the same NID, TID
and SID, but different "radio IDs". This new field is therefore called RID ("radio
ID"). Currently NID and TID are not yet used by VDR and should always be 0. The
RID is actually used when building the "unique channel ID", so if you have channels
in your 'channels.conf' file that cause error messages when loading, you can set
the RIDs of these channels to different values.
When reading an old 'channels.conf' these new fields will be automatically
initialized to 0 and once the file is written back to disk they will be appended
to the channel definitions.
Thanks to Régis Bossut for pointing out that with some providers the channels can
only be distinguished through the RID.
- The "unique channel ID" now contains an optional 5th part (the RID). See man vdr(5).
- Updated 'channels.conf.cable' and made some channels unique using the new RID
(thanks to Andreas Kool for pointing out the problems).
- Made some channels unique in 'channels.conf.terr' using the new RID.
- Extended the '-l' option to allow logging to LOG_LOCALn (n=0..7) by writing, for
instance, '-l 3.7' (suggested by Jürgen Schmidt).
- Now deleting stale lock files if they have a time stamp that is outside the window
'now +/- LOCKFILESTALETIME'. This improves things in cases where the system time
makes far jumps, so that a lock file might end up with a time stamp that lies
in the distant future (thanks to Oliver Endriss).
|
|
- Fixed some faulty default parameter initializations (thanks to Robert Schiele).
- Added further satellites to 'sources.conf' (thanks to Reinhard Walter Buchner
and Oliver Endriss).
- Updated Finnish OSD texts (thanks to Jaakko Hyvätti).
- Fixed a small glitch when switching channels (thanks to Dennis Noordsij for
reporting this one).
- Fixed handling multiple 'CaCaps' entries in 'setup.conf'.
- Group separators in 'channels.conf' may now be given like ':@201 My Channels',
where '@201' indicates the number to be given to the next channel. This can be
used to create 'gaps' in the channel numbering (see 'man 5 vdr'). BE CAREFUL
TO UPDATE YOUR 'timers.conf' ACCORDINGLY IF INSERTING THIS NEW FEATURE INTO YOUR
'channels.conf' FILE!
- Timers now internally have a pointer to their channel (this is necessary to
handle gaps in channel numbers, and in preparation for unique channel ids).
- Fixed slow reaction on SVDRP input (thanks to Guido Fiala for reporting this one).
- Added KI.KA to channels.conf.cable (thanks to Robert Schiele).
- Frequency values for cable and terrestrial channels in 'channels.conf' can
now be given either in MHz, kHz or Hz. The actual value given will be multiplied
by 1000 until it is larger than 1000000.
- Fixed skipping unavailable channels when zapping downwards.
- Fixed checking the Ca() status of a cDevice (thanks to Stefan Huelswitt).
- Fixed switching audio tracks in 'Transfer Mode' on the primary DVB device
(thanks to Steffen Barszus and Stefan Huelswitt for reporting this one and
helping to fix it).
- Fixed channel switching in case of an active 'Transfer Mode' on the primary
device ('Transfer Mode' is now launched with priority '-1').
- Fixed a ternary expression in dvbspu.c.
- Fixed handling 'Transfer Mode' on single device systems when recording an
encrypted channel (thanks to Stefan Huelswitt).
- Fixed blocking replaying in case an encrypted channel is being recorded on
the primary device.
- Now the name of the remote control is displayed when learning the keys.
- Fixed learning remote control keys in case there is more than one remote
control (thanks to Oliver Endriss for reporting this one).
- Implemented additional dedicated keys for "Play", "Pause", "Stop", "Record",
"FastFwd", "FastRew", "Channel+" and "Channel-". If your remote control supports
any of these keys you can delete your 'remote.conf' file and restart VDR to
go through the key learning procedure again in order to assign these new keys.
See MANUAL for more information.
Authors of player plugins should update their ProcessKey() functions so that
the new player keys have the same functionality as the "Up", "Down", "Left",
"Right" and "Blue" keys, respectively. Note that the existing functionality
of these keys should by all means be retained, since VDR (and any plugins)
shall be fully usable with just the basic set of keys. These new keys are only
for additional comfort in case the remote control in use supports them.
- Implemented new keys to directly access the VDR main menu functions "Schedule",
"Channels", "Timers", "Recordings", "Setup" and "Commands". If your remote
control provides keys you want to assign these functions to, you can delete
your 'remote.cof' file and restart VDR to go through the key learning procedure
again in order to assign these new keys. See MANUAL for more information.
- The new configuration file 'keymacros.conf' can be used to assign macros to
the color buttons in normal viewing mode, as well as to up to 9 user defined
keys. See MANUAL and man vdr(5) for more information. The default 'keymacros.conf'
implements the functionality of the "color button patch".
- Fixed a crash when learning the keys of several remote controls and pressing
buttons of those that have already been learned (thanks to Oliver Endriss for
reporting this one).
|
|
- Added cDevice::DeviceNumber() to get the number of a device, not counting any
gaps that might be in the index count.
- Fixed fetching the current/next information to handle cases where the duration
of an event is set wrongly and would last beyond the start time of the next
event.
- Adapted type names to the new HEAD version of the driver (which the previous
NEWSTRUCT branch has been merged into). Note that to use this driver version
you still need to add NEWSTRUCT=1 to the make call when building VDR. You
need a HEAD version of the LinuxDVB driver dated 2002-10-11 or later to compile
VDR with NEWSTRUCT=1.
- Fixed radio channels in channels.conf.cable (thanks to Robert Schiele and Uwe
Scheffler).
- Fixed switching the video format in the Setup/DVB menu (thanks to Uwe Scheffler
for reporting this one).
- Reactivated full handling of second audio PID (even in 'Transfer Mode').
- Fixed a crash when closing down with remote control plugins (thanks to Oliver
Endriss helping to debug this one).
- Commands in the file 'commands.conf' can now have a '?' at the end of their
title, which will result in a confirmation prompt before executing the
command.
- Changed a few leftover 'new char[...]' to MALLOC(char, ...).
- If a command executed from the "Commands" menu doesn't return any output, the
OSD will now be closed automatically.
- The SVDRP command PUTE now triggers an immediate write of the 'epg.data' file
(suggested by Gerhard Steiner).
- The new configuration file 'reccmds.conf' can be used to define commands that
shall be executed from the "Recordings" menu; see MANUAL and 'man vdr(5)' for
details (suggested by Gerhard Steiner).
|
|
- Fixed a missing Flush() call in the remote control learning procedure (thanks
to Oliver Endriss).
- Modified channel handling to cover all parameters necessary for DVB-C and DVB-T
(see man vdr(5) for the meaning of the additional parameters stored in the field
previously named 'polarisation'). Thanks to Uwe Scheffler and Andy Carter for testing.
If you have a system with different kinds of DVB cards, like DVB-T and DVB-C,
for instance, there is no more need to distinguish the channels through the
'Ca' parameter in order to assign them to the various DVB cards. This is now
taken care of by the "source" parameter. So a channel marked as "terrestrial",
for example, will only be received on DVB-T cards.
Note that the cChannel class has been moved into a separate file (channels.[ch]),
and that all data members have been made private and are now only accessible
through member functions. You may have to change any plugin code that accesses
cChannel data accordingly.
- The new configuration file 'sources.conf' contains the various signal sources
(satellites, cable and terrestrial) which are used in 'channels.conf' and
'diseqc.conf' (thanks to Reinhard Walter Buchner for adding some satellites to
'sources.conf' and Oliver Endriss and Lauri Tischler for testing and debugging).
- The 'diseqc' parameter in the channel definitions has been redefined to hold the
"source" of the given channel (which can be either a satellite, cable or terrestrial).
For compatibility with channels.conf files from older versions, numeric values in
this parameter will be tolerated, but they have no meaning. If you want to use
DiSEqC you will need to replace these old values with the proper source identifiers
defined in the new configuration file 'sources.conf'. See how this is done in the
'channels.conf' file that comes with the VDR package.
- The new configuration file 'diseqc.conf' can be used to set up the individual
diseqc configuration (see man vdr(5) for a description of the file format).
- The "Edit channel" menu has a new entry "Source:" in which the source of this
channel can be selected (either a satellite, cable or terrestrial). The set of
parameters at the end of this menu will change according to the type of source.
- The "Use DiSEqC" parameter in the "Setup/LNB" menu has been moved to the beginning
of the list and disables the rest of the parameters when set to "yes", since these
are now only meaningful if DiSEqC is _not_ used.
- Removed some unnecessary #includes from eit.c and changed cMenuRecordings::Del()
to cMenuRecordings::Delete() to avoid warnings in gcc-3.2 (thanks to Andreas
Schultz for pointing this out).
- Improved skipping channels that are (currently) not available (thanks to Stefan
Huelswitt).
- Updated channels.conf.terr and channels.conf.cable (thanks to Uwe Scheffler).
- Fixed a bug when pressing the "Blue" button in the main menu without having
displayed it (thanks to Oliver Endriss for reporting this one).
|
|
- Fixed an incomplete initialization of the filter parameters in eit.c (thanks
to Jeremy Hall).
- Fixed the 'newplugin' script for use with the NEWSTRUCT driver (thanks to
Andreas Schultz for reporting this one). If you have already created a plugin
directory and Makefile with 'newplugin', please apply the following patch to it:
-------------------------------------------------------
--- Makefile 2002/06/10 16:24:06 1.4
+++ Makefile 2002/09/17 15:36:36 1.5
@@ -15,7 +15,12 @@
### The directory environment:
+ifdef NEWSTRUCT
+DVBDIR = ../../../../DVB/include
+DEFINES += -DNEWSTRUCT
+else
DVBDIR = ../../../../DVB/ost/include
+endif
VDRDIR = ../../..
VDRINC = $(VDRDIR)/include
LIBDIR = ../../lib
@@ -34,7 +39,7 @@
INCLUDES = -I$(VDRINC) -I$(DVBDIR)
-DEFINES = -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
+DEFINES += -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
### The object files (add further files here):
-------------------------------------------------------
This is the diff for the 'setup' example that comes with VDR, so your line
numbers may be different.
- Added a missing 'public' keyword in device.h (thanks to Martin Hammerschmid).
- Fixed a race condition when starting 'Transfer Mode'.
- Rearranged the remote control key handling to allow plugins to implement
additional types of remote controls (see PLUGINS.html, section "Remote Control").
The previously used files 'keys.conf' and 'keys-pc.conf' have been replaced
by the file 'remote.conf', which holds the key definitions of all remote controls.
- The LIRC remote control keys are now handled just like the keyboard and RCU keys.
This means that you can use the lircd.conf file as is for your remote control,
without the need of editing it to make the key names the same as used in VDR.
When first starting VDR it will go into the "Learning keys" mode and ask you
to press the various keys. The resulting key assignment will be stored in
the file 'remote.conf'.
Since I have no way of testing the LIRC support, I hope I didn't break it in
the process...
- While learning the remote control keys it is now possible to press the 'Menu'
key to skip the definition of keys that are not available on your particular
RC unit.
- Fixed handling DVD subtitles in the SPU decoder (thanks to Andreas Schultz).
- Avoiding restarts due to 'panic level' when switching channels on the primary
device during EPG scan.
|
|
- Added Hungarian language texts (thanks to Istvan Koenigsberger and Guido Josten).
- Activated cutting.
- Activated 'Transfer Mode'.
- Moved handling of the Menu key entirely into vdr.c.
- Switched VDR's own player to the new cPlayer/cControl structures.
- Switched handling 'Transfer Mode' to the new cPlayer/cControl structures.
- The following limitations apply to this version:
+ The '-a' option (for Dolby Digital audio) doesn't work yet.
+ Switching between different language tracks doesn't work yet.
|
|
- Improved the VDR Makefile to avoid a warning if the '.dependencies' file does
not exist, and also using $(MAKE) to call recursive makes.
- Changed the name of the 'package' target in the plugin Makefiles to 'dist'
(following the suggestions in the "GNU Make" manual). If you already have started
a plugin project, you may want to change this in your Makefile accordingly.
- Improved the plugin Makefile to avoid a warning if the '.dependencies' file does
not exist, and also using $(shell...) to get the version numbers. If you already have
started a plugin project, you may want to change this in your Makefile accordingly.
- Fixed some function headers to make them compile with gcc 3.x (thanks to
Gregoire Favre).
- Fixed the cutting mechanism to make it re-sync in case a frame is larger than the
buffer (thanks to Sven Grothklags).
- Added an error message if the directory specified in the '-L' option can't be
accessed (suggested by Stefan Huelswitt).
- Rearranged OSD class names to make 'cOsd' available for the main OSD interface.
- Completely moved OSD handling out of the cDvbApi class, into the new cOsd.
- Implemented cStatus to allow plugins to set up a status monitor.
See PLUGINS.html for details.
- Moved the cEITScanner out of dvbapi.h/.c, into the new eitscan.h/.c.
- Added Swedish language texts (thanks to Tomas Prybil).
- Fixed parsing 'E' records in epg2html.pl (thanks to Matthias Fechner for pointing
out this one).
- Removed compiler option '-m486' to make it work on non-Intel platforms. If you
have already started a plugin project, you may want to make sure you remove this
option from your existing Makefile.
- Completely rearranged the recording and replay functions to make them available
to plugins.
- Replay is now done in a single thread (no more syncing between input and output
thread necessary).
- It is now possible to record several channels on the same transponder with "budget
cards". VDR automatically attaches a recording timer to a card that already
records on the appropriate transponder. How many parallel recordings can actually
be done depends on the computer's performance. Currently any number of recordings
gets attached to a card, so you should carefully plan your timers to not exceed
the limit. On a K6-II/450 it was possible to record three channels from transponder
12480 with a single WinTV NOVA-S.
- Timers that record two successive shows on the same channel may now overlap and
will use the same DVB card. During the time where both timers record the data
is simply saved to both files.
- The following limitations apply to this version:
+ Transfer mode doesn't work yet.
+ The '-a' option (for Dolby Digital audio) doesn't work yet.
+ Switching between different language tracks doesn't work yet.
+ Cutting doesn't work yet.
|
|
- Begin of the 1.1 development branch. THIS IS NOT A STABLE VERSION!
The current stable version for every day use is still the 1.0 branch.
- First step towards a universal plugin interface. See the file PLUGINS.html
for a detailed description. The man page vdr(1) describes the new options '-L'
and '-P' used to load plugins. This first step implements the complete "outer"
shell for plugins. The "inner" access to VDR data structures will follow.
- The VDR version number is now displayed in the title line of the "Setup" menu.
|
|
- Fixed restoring CICAM setup values for a fourth DVB card (thanks to Klaus Wolf).
- Completed internationalization of OSD texts (thanks to Hannu Savolainen,
Arnold Niessen, Paulo Lopes, Jean-Claude Repetto, Alberto Carraro, Matjaz
Thaler and Truls Slevigen).
- Improved file I/O in case of EINTR, which may occur e.g. with heavy system
load (thanks to Werner Fink).
- Now writing the title of a recording into the 'summary.vdr' file.
- Workaround for displaying still frames with the unpatched LinuxDVB driver
(if anybody ever finds out why the unpatched driver doesn't display VDR's
still frames, please let me know).
- When executing a command from the "Commands" menu, the title of that command
is now immediately shown in the status line (followed by "...") to give the
user some feedback that the command is being executed, which is especially
important if this takes some time.
- Fixed scrolling the "Channels" menu in case the cursor ends up on a group
delimiter (thanks to Bernd Zierath for helping to debug this one).
- Added manual pages vdr(1) and vdr(5) (which made the FORMATS file obsolete).
- New command command line option '-V' to display the VDR version.
- Adjusting column width for channel numbers in case there are more than 999
channels.
- Checking the return value of '...FileRady...' calls in dvbapi.c for better
performance under heavy system load.
- New 'make' target 'install', which copies the manual pages and executables
to their appropriate system locations and creates the /video directory if
it doesn't exist yet.
- Automatic hotkey assignment is now suppressed if the first entry in
commands.conf starts with a digit in the range '1'...'9', followed by a blank.
- Fixed a bug in switching back the replay mode display in time shift mode
(thanks to Achim Lange for reporting this one).
- Fixed a bug in the 'First day' timer parameter for timers that record over
midnight.
- Added units to Setup parameters.
- Changed time entry in the 'Jump' command during replay, so that it is filled
up from right to left.
- Now using statfs() to determine the amount of free disk space, which avoids
the use of an external 'df' command (thanks to Ruben Nunez Francisco).
- Fixed skipping the next hit of a repeating timer (thanks to Rainer Zocholl
for reporting this one).
- Fixed a bug when a timer records over midnight of a day that had a change in
Daylight Saving Time.
- Added Polish language texts (thanks to Michael Rakowski).
- Fixed a bug in parsing group separators in channels.conf (thanks to Henning
Holtschneider for reporting this one).
- Changed the default 'Ok' key when using the PC keyboard from '5' (in the
numeric block) to 'Enter', because the '5' key didn't work on keyboards with
the F-keys on top.
- Fixed a bug in the EPG bugfix mechanism if the extended description is shorter
than 3 characters (thanks to Andreas Schultz).
|
|
- Added 'Ca' code 201 for 'Cryptoworks, GOD-DIGITAL' to 'ca.conf' (thanks to
Bernd Schweikert).
- Fixed avoiding the primary DVB interface in case Setup.PrimaryLimit is 0.
- Fixed handling CICAM settings if the first one of a DVB card was FTA.
- Fixed reacting on changes in CICAM settings (needed to restart VDR before).
- The "Blue" button in the "Main" menu now works as "Stop" button if a recording
is currently being replayed.
- New command line option '-m' to mute audio of the primary DVB device at
startup (suggested by Mirko Günther).
- The new SVDRP command VOLU can be used to control the audio volume (suggested
by Mirko Günther).
- Fixed resetting 'mute' state when setting the volume to a non-zero value.
- Added log messages when deleting recordings in case the disk runs full while
recording.
- Fixed closing a pipe (used for replaying Dolby Digital audio), which
sometimes left 'zombie' processes behind (thanks to Werner Fink for helping
to debug this one).
- Now starting the Dolby Digital output thread only if the recording actually
contains Dolby Digital audio data (thanks to Werner Fink).
- Implemented OSD for Volume and Mute (works only if there is no other OSD
activity, but this should be no problem for normal use).
- Changed the MANUAL description of the "Conditional Access" setup parameters
to reflect the actual "CICAM DVBn m" notation in the "Setup" menu.
- The new Setup parameter "Use time from transponder" can be used to define which
transponder shall be used to set the system time (see MANUAL for details).
If you have been using the SetSystemTime option previously, you now MUST
select a channel that you trust to have a reliable time base.
- Grouped the Setup parameters into several sub-menus, so that each group of
parameters fits on a single screen - unless the height of the OSD has been
set to a small value (based on code from Markus Lang).
- Changed the title of the "Main" menu to "VDR".
- Fixed displaying a system message while the replay mode is being shown.
- Physically removing a deleted recording if one with the same name shall be
deleted again.
- The "Left" and "Right" keys are now used to page up and down in text displays
(like the EPG descriptions or the results of commands executed from the
"Commands" menu).
- Fixed high CPU usage in transfer mode.
- Replaced 'killproc' with 'killall' in 'runvdr', since apparently 'killproc'
is not available by default on some Linux distributions, whereas 'killall' is.
Please check if your system provides 'killall' - if it doesn't, please change
this back in 'runvdr' and report this (thanks to Achim Lange).
- The "Commands" menu now automatically assigns number keys as hotkeys to the
commands. If you have preceeded your commands with digits you may want to
remove these from your 'commands.conf' file.
- The new Setup item "Restart" can be used to force a complete restart of VDR,
including reloading the driver. Note that this can only work if VDR and the
driver are wrapped into a mechanism that actually performs this action if VDR
exits. The 'runvdr' script can be used for this purpose.
- Refined texts of the "Setup" menu.
|
|
- Added scanning for EPG data for another 4 days on channels that support this
(thanks to Oleg Assovski).
- Removed '#define VFAT 1' from recording.c (was a leftover from testing).
- Fixed the "Low disk space!" message (thanks to Sergei Haller).
- Added the TPID to Hessen-3 in 'channels.conf' (thanks to Sergei Haller).
- Fixed a crash when replaying with DEBUG_OSD=1 (thanks to Stefan Huelswitt).
- Implemented the "First day" parameter for repeating timers. See FORMATS for
information about the enhanced 'timers.conf' file format, and MANUAL for
a description of the new item in the "Edit Timer" menu and the enhanced
functionality of the "Blue" button in the "Timers" menu.
- When deleting a recording that is currently still being recorded, the related
timer will now automatically be terminated. If this is a repeating timer, it
will receive a "First day" setting that skips the timer for this day.
- Fixed closing all unused file descriptors when opening a pipe (thanks to
Werner Fink).
- Instant recordings now take the EPG data from the point in time at 5 minutes
from the start time of the recording. In order for this to work the 'active'
parameter of a timer now uses the second bit to indicate that this is an
"instant" recording (see FORMATS for details).
- Fixed the SVDRP GRAB command in case the video device can't be opened (thanks
to Adrian Stabiszewski).
- At startup the data written into 'epg.data' is now read into the EPG data
structures. In order for this to work, the 'E' record has been extended to
(optionally) contain the 'table ID' (see FORMATS for details).
- The new SVDRP command PUTE can be used to put EPG data into the EPG list.
See FORMATS for details about the required data format.
- Taking the German umlauts 'as is' when compiled with VFAT.
- The new Setup parameter RecordDolbyDigital can be used to generally turn off
recording the Dolby Digital audio channels in case you want to save disk space
or don't have the equipment to replay Dolby Digital audio.
- Reading the 'setup.conf' file no longer terminates in case of an error, but
rather attempts to read the rest of the file.
- Removed DVD support from the core VDR source, since the current version from
Andreas Schultz is already much further developed (DVD menu navigation) and
the concept of "additional players" in VDR is going to change in version 1.1.0,
where a new "plugin" interface shall allow the easy implementation of new
players without having to patch the core VDR source. Until then, Andreas has
agreed to provide his DVD support as a completely external patch.
- The contents of the distribution archive now contains the directory name with
the current version number, as in 'vdr-1.0.0pre1/...' in order to avoid
inadvertently overwriting an existing VDR directory with a new version.
- Added a missing error message in SVDRP command LSTC in case the given channel
can't be found.
|
|
- Fixed setting the OSD size in the 'Confirm' interface call (thanks to
Deti Fliegl).
- Removed the 'read incomplete section...' error message in the EIT processor.
- Fixed channel data for "DW TV" (thanks to Axel Gruber).
- Added DPID to "PREMIERE MOVIE 1" in channels.conf.cable (thanks to Stephan
Schreiber).
- Prepared the OSD functions for multiple overlapping windows.
- Removed the check to see whether the system time is running linearly.
- Improved performance of SVDRP command entry.
- Removed EPGBugfixLevel '3' - after more than a year Pro-7 finally managed to
broadcast the correct timestamps for EPG events between 0:00 and 6:00!
- Fixed failing watchdog timer if program hangs in OSD activities (thanks to
Carsten Koch).
- No longer requiring 'libncurses' if compiling without DEBUG_OSD=1 and
REMOTE=KBD (thanks to Lauri Pesonen).
- The "Recordings" menu now displays a hierarchical structure if there are
subdirectories for the recordings. This can be controlled through the
"RecordingDirs" parameter in the "Setup" menu.
See "MANUAL/Replaying a Recording" for details.
- Improved speed of setting the Help button texts.
- Fixed handling file names that contain single quotes (') or dollar signs ($)
in the call to the shutdown command (option '-s') and the recording command
(option '-r').
- Improved error handling in the editing process; the resulting file will be
deleted if an error occured.
- A message is now prompted at the end of the editing process, indicating
whether the process succeeded or failed.
- Fixed setting the LastActivity timestamp after a shutdown prompt (thanks to
Sergei Haller).
- A message is now prompted if free disk space becomes low during recording.
- The editing process now calls AssertFreeDiskSpace() to remove deleted
recordings if the disk becomes full.
- The "Main" menu now displays in its title the used disk space (in percent)
and the estimated free disk space (in hh:mm), assuming a data rate of 30 MB
per minute.
- Activating the "Recordings" menu now displays "scanning recordings..." to
give the user some feedback in case this takes longer.
- Status messages are now displayed centered.
- Removed the 'Tools' subdirectory from the VDR archive. All contributed tools
can now be found at ftp://ftp.cadsoft.de/pub/people/kls/vdr/Tools.
|
|
- Completed storing the current audio volume in the setup.conf file (thanks
to Andy Grobb).
- Fixed closing the progress display with the "Back" key when in trick mode
and Setup.ShowReplayMode is enabled (thanks to Stefan Huelswitt).
- New SVDRP commands LSTR and DELR to list and delete recordings (thanks to
Thomas Heiligenmann).
- Fixed a crash when pressing the '2' button while replaying a DVD.
- Updated 'channels.conf' for the "Bundesliga" channels of Premiere World
(thanks to Mel Schächner).
- Changed the tuning code to use FrontendInfo to detect the type of DVB card.
- Removed the recursion stuff from cThread (cMutex already does this).
- Fixed handling the repeat function in the channel display.
- Avoiding multiple EPG entries for the same event (thanks to Rolf Hakenes
for some valuable information on how to do this).
- A recording on the primary interface can now be stopped to make it continue
on an other free DVB card (if one is free at the moment). See MANUAL for
details.
- Added some missing teletext PIDs (thanks to Norbert Schmidt).
- Added PTS to the converted PCM audio when replaying a DVD (thanks to Andreas
Schultz). Now the audio and video of a DVD replayed over the DVB card's A/V
out should always be in sync.
- Fixed handling the "Power" key in case Setup.MinUserInactivity is set to 0 to
disable automatic shutdown.
- Added a fifth parameter to the 'shutdown' call that indicates the reason for
this shutdown request (see INSTALL).
- Fixed releasing 'index' memory after recording or playback.
- Fixed ejecting a DVD while it is being replayed.
- Removed all video overlay stuff from cDvbApi and SVDRP. Guido Fiala's new
'kvdr' version 0.4 now does these things itself. As a consequence of this you
will now need to use kvdr 0.4 or later.
- The device /dev/video is now opened only if necessary (to GRAB an image),
allowing other programs (like 'kvdr', for instance) to use that device.
|
|
- Implemented a lock file to prevent more than one instance of VDR from removing
files from the video directory at the same time.
- The new setup parameter SplitEditedFiles can be used to control whether or
not the result of an editing process shall be written into separate files.
- Fixed handling repeat function when using LIRC (thanks to Matthias Weingart).
- The shutdown program (defined with the '-s' option) now also gets the channel
number and recording title of the timer (see INSTALL).
- New channel data for 'Premiere One', 'Premiere X-Action', 'Fox Kids Türkce'
and 'N24' (thanks to Andreas Share, Ulrich Röder, Uwe Scheffler and Simon
Bauschulte). Note that if you are using the default 'channels.conf' or
'channels.conf.cable' files you may need to check any exiting timers to see
whether they still use the correct channel number.
- Fixed the "EPG bugfix" (sometimes had duplicate information in Subtitle and
Extended Description).
- Fixed checking for valid video device when setting the video mode.
- The external command 'sort' is no longer required. VDR now sorts the list of
recordings itself, making sure that recordings that stem from repeating timers
are sorted chronologically. Sorting is done according to the setting of the
current locale, so you may want to make sure LC_COLLATE is set to the desired
value (see INSTALL).
- Fixed handling 'newline' characters in EPG texts (thanks to Rolf Hakenes for
an improved version of his 'libdtv').
Newline characters are always mapped to a single "blank" in VDR, because they
would otherwise disturb the Title and Subtitle layout in the channel display
(where these are assumed to be single line texts) and would have to be
specially handled in the 'epg.data' file and the LSTE command in SVDRP.
- Mapping ` ("backtick") characters in EPG texts to ' (single quote).
- Fixed timers starting and ending at unexpected times. 'localtime()' was not
thread safe, now using localtime_r().
- Removed the "system time seen..." message.
- Fixed a bug in the replay mode display when pressing the Green or Yellow
button while in trick mode (thanks to Stefan Huelswitt)
- Closing all open file descriptors when calling external programs.
- The menu timeout now also works when pressing the "Back" button during replay
to enter the "Recordings" menu.
- Updated 'channels.conf' for the "Bundesliga" channels of Premiere World
(thanks to Helmut Schächner).
- Fixed reading timers.conf and channels.conf that contain blanks after numeric
values.
- Fixed handling trick modes near the beginning and end of a recording.
- Pressing the "Back" button while replaying a DVD now leads to the DVD menu.
|
|
- Made VDR compile with libdvdread-0.9.1 (thanks to Andreas Schultz).
Note that you now _need_ version 0.9.1 of libdvdread to compile VDR with
DVD support!
- Several fixes to the replay mode display (thanks to Stefan Huelswitt):
no more replay mode display when pressing the "Green" or "Yellow" button
(Skip +/-60s); fixed timeout when pressing '0' to set an editing mark while
the progress display is not shown; mode display is shown after progress
display is closed; pressing "Ok" while the mode display is on brings up
the progress display; no more unnecessary display of "normal play mode".
- Supplying the new frontend parameter 'Inversion' (currently it is always
set to INVERSION_AUTO, which should work with all channels on Astra).
- Removing unnecessary double quotes from EPG Subtitle in EPGBugfixLevel >=1.
- EPG info is now updated if the contents changes but the ID remains the same.
- Fixed handling SVDRP commands whith more than one blank between the command
word and the options.
- The current volume setting is now saved to setup.conf and restored at the
next program start.
- New command line option '-r' to define a command that gets called before and
after each recording (see INSTALL for details).
- Implemented a check to see whether the system time is running linearly.
- Writing the current time (as seen by VDR) into the log file when starting
a timer recording (this may help debugging cases where timers don't start
at the expected time).
- Made the volume, mute and power keys work when a menu is active, too (thanks
to Matthias Weingart).
|
|
- Fixed behaviour in case the shutdown didn't take place (there were many
"next timer event at..." messages in that case).
- Reduced the default value for MinEventTimeout to 30 minutes.
- Fixed detecting manual start in shutdown feature.
- An error message is now displayed in case the Transfer Mode can't be
started because the necessary DVB card is currently recording (or there
is no DVB card that can access this channel).
- Fixed toggling channels with the '0' key in case the "Ok" button has been
pressed to display the current/next information.
- Pressing the "Power" key now always initiates the shutdown sequence (after
user confirmation in case of a recording timer), event if there is currently
a menu or a replay session active. Note the additional remarks in INSTALL
regarding the values of the two parameters given to the shutdown program
in case of a currently recording timer.
- Switching through channel groups with the "Left" and "Right" keys now
always starts at the group that contains the current channel.
- Implemented "Multi Speed Mode" (thanks to Stefan Huelswitt).
- Implemented backtracing to hit the right spot after fast forward/rewind
(thanks to Stefan Huelswitt).
- Implemented replay mode display (thanks to Stefan Huelswitt, with a few
rewrites by kls).
- Changed the size of all input buffers used to parse config files or receive
SVDRP commands to the same value of 10KB. This allows long strings to be
used in the 'summary' field of a timer, for instance.
- The pipe to the Dolby Digital replay command (option '-a') now closes all
unused file descriptors in the child process to avoid crashing when the
OSD is used (thanks to Andreas Vitting).
- Switched to the driver's new tuning API (VDR now requires a driver version
dated 2001-09-14 or higher).
- Changed obsolete macro VIDEO_WINDOW_CHROMAKEY to VID_TYPE_CHROMAKEY (thanks
to Guido Fiala).
- New version of the "Master-Timer" tool (thanks to Matthias Schniedermeyer).
- Better error handling when writing configuration files.
- Fixed putting the final editing mark into the edited version's marks file.
- Fixed manipulating an editing mark at the very end of a recording.
- Fixed starting a new replay immediately after stopping a previous one (had
caused a mix between live video and replay).
- Three new keys ("Volume+", Volume-" and "Mute") to control the DVB card's
audio output volume.
- New version of the 'epg2timers' tool (thanks to Carsten Koch).
|
|
- Implemented automatic shutdown (see INSTALL and MANUAL for details).
- New SVDRP command NEXT to show the next timer event.
- The new remote control key "Power" can be used to turn the VDR machine
off (this requires the presence of the '-s' option).
- Fixed code for the default "Ok" button on the PC keyboard (was 0x162 on
the "good old" keyboards (with the F-keys at the left side), while it changed
to 0x15E on the newer keyboards).
- When a recording is edited, the summary information (if present) is now
also copied.
- When a recording is running on the primary interface, any attempt to change
the current channel will now lead to a "Channel locked" message.
- The main program loop now first checks whether any timer recordings are
finished, before starting a new timer recording. This is important in case
one timer ends at the same time another timer starts.
- New setup parameter OSDMessageTime to define how long an OSD message shall
be displayed.
- The "File" parameter of a timer can now contain the '~' character to store
the recording in a hierarchical directory structure. The '~' character has
been chosen since the file system's directory delimiter '/' may be part of
a regular programme name (showing the directory hierarchy in the "Recordings"
menu will follow later).
- Repeating timers now create recordings that contain the 'Subtitle' information
from the EPG data in their file name. Typically (on tv stations that care
about their viewers) this contains the episode title of a series. The
subtitle is appended to the timer's file name, separated by a '~' character,
so that it results in all recordings of this timer being collected in a
common subdirectory. You can disable this with the 'UseSubtitle' parameter
in the "Setup" menu.
- The summary information is now taken from the EPG data at the actual time of
recording (no longer at the time the timer is created in the "Schedule" menu).
If a timer already has summary data, that data will be used. If you have
repeating timers in your 'timers.conf', you may want to make sure they do
NOT contain any summary information (that's the last field in the timer
definitions). Use your favourite text editor to delete that information.
That way every recording will store the actual summary data at the time of
the recording.
|
|
- The "channel not sync'ed" log message now also lists the card number.
- Now using the EIT services from 'libdtv' (thanks to Rolf Hakenes), which
provides EPG information for NVOD ("Near Video On Demand") channels.
- Doing some bug fixing on the EPG data (some tv stations apparently have
their own idea on how to fill in the data...). The level up to which EPG
bugs are fixed can be controlled with the EPGBugfixLevel parameter in the
"Setup" menu (see MANUAL for details, and cEventInfo::FixEpgBugs() in eit.c
for the actual implementation).
- Fixed broken recordings after a driver buffer overflow.
- Fixed the chirping sound after Pause/Play of a DVD (thanks to Andreas
Schultz).
|
|
- Fixed displaying colored button texts that are too long.
- Suppressing replay progress display when replaying a DVD.
- Updated channels.conf.cable (thanks to Uwe Scheffler).
- Updated French OSD texts (thanks to Jean-Claude Repetto).
- Improved AC3 decoding when replaying DVDs (thanks to Matjaz Thaler).
- Fixed handling DVB card indexes when using only one card in a multi-card
system.
- Changed the 'Eject DVD' button text to a simple 'Eject' (the German text
was too long...).
- Made the font file generation more stable (thanks to Artur Skawina).
- Changed the default value for the "DiSEqC" setup parameter to "off".
- The new command line option '-E' can be used to define where the EPG data
shall be written to. This is especially useful if VDR runs in a system
that turns off the video disk when it is not used, and therefore needs
to write the EPG file to a ramdisk (or turn off writing it alltogether).
See 'vdr --help' for details.
- Making sure the disk is up and running before starting recording (this
is important for systems that turn off the video disk when it is not used).
- Added the "Jump" function in replay mode (thanks to Stefan Huelswitt).
See the description of the "Red" key in MANUAL under "Replay Control" for
details.
- Fixed displaying editing marks when toggling a mark in "pause" mode.
- If there is no free DVB device to record, the log message will now be given
only once.
- Made I/O more robust by handling EINTR (thanks to Werner Fink).
|
|
- Modified the display of the channel group separators (thanks to Markus Lang
for this suggestion).
- Added support for replaying DVDs (thanks to Andreas Schultz). See INSTALL for
instructions on how to compile VDR with DVD support.
- Fixed replay progress display in case replay is paused while watching an
ongoing recording.
- Ringbuffer uses semaphores to signal empty/full conditions.
- Fixed calculating the timeout value in cFile::FileReady() (thanks to
Wolfgang Henselmann-Weiss).
|
|
- Added Norwegian language texts (thanks to Jørgen Tvedt).
- Increased the usleep value in cDvbOsd::Cmd() to 5000 in order to work on
systems with the KURT/utime-patch (thanks to Guido Fiala).
- Changed the check whether the driver is loaded in runvdr to check for the
'dvb' module (the last one loaded).
- Fixed repeat function with LIRC (thanks to Stefan Huelswitt).
- Increased the upper limit for the symbol rate to 30000 (thanks to Ulrich
Röder).
- Made the position of the channel display configurable (thanks to Stefan
Huelswitt).
- Made the width and height of the OSD configurable (thanks to Stefan Huelswitt).
- DiSEqC support can now be generally enabled/disabled in the Setup menu. This
may be necessary if your multiswitch gets irritated by the default DiSEqC
codes '0' (thanks to Markus Lang).
- Fixed replaying in case there is no index file.
- Fixed jumping to an editing mark when replay has been paused.
- Avoiding unnecessary code execution in the replay progress display (thanks
to Guido Fiala).
- When entering time values the digits that still have to be entered are now
shown as '-' (as in "1-:--").
- When setting an editing mark while the progress display is not active, the
display will now be turned on for a short while to indicate the successful
setting of the mark.
- Updated 'channels.conf' for Premiere World (thanks to Helmut Schächner).
Check your timers if you use this channels.conf file, since the sequence of
several PW channels has been changed.
- Changed the color of "Info" messages to "black on green" and that of the
confirmation messages (like "Delete...") to "black on yellow".
- Fixed display with DEBUG_OSD (it still crashes sometimes, esp. when replaying,
but I can't seem to find what causes this... any ideas anybody?).
- Avoiding audio/video distortions in 'Transfer Mode' by no longer actually
tuning the primary interface (which can't receive this channel, anyway).
Apparently the driver gets irritated when the channel is switched and a
replay session is started immediately after that.
- Increased timeout until reporting "video data stream broken" when recording.
- Explicitly switching back to the previously active channel after ending a
replay session (to have it shown correctly in case it was in 'Transfer Mode').
|
|
- Fixed 'Transfer Mode' in cases where a non-primary interface was switched to
a channel that only the primary interface can receive (which could happen in
the EPG scanner).
- The EPG scanner now starts with the first channel (it used to start with the
second channel).
- Reacitvated setting the PNR.
- Adapted the frame scanning to the new muxing of the driver.
- The new compile time option REMOTE=NONE can be used to compile VDR without
any remote control support (for applications where it shall be controlled
exclusively via SVDRP).
- The new command line option -D can be used to define which DVB interfaces
a certain instance of VDR shall use.
- The "Left" and "Right" keys are now used to page up and down in lists (thanks
to Martin Hammerschmid). Since the "Timers" menu already uses these keys to
(de)activate timers, this functionality is not available there.
- The "Main" and "Commands" menu now support "hotkeys", which means that if the
first non-blank character of a menu item is a digit in the range 1..9, that
item can be selected by pressing the respective numeric key on the remote
control.
- The channel data in 'channels.conf' now contains the teletext PID (thanks to
Dave Chapman). Existing files will be read normally (and the teletext PID set
to 0), but once they are written back (due to some channel editing) the file
will have the new format.
- The EPG scanner now scans each transponder only once per cycle.
- Deleted recordings are now automatically removed from disk after a while (not
only when disk space is being needed for a new recording).
- Fixed repeat function in LIRC remote control.
- Changed the MAXDVBAPI macro in dvbapi.c to 4 in order to directly support the
maximum possible number of DVB cards.
- The 'Ca' parameter in the default 'channels.conf' has been changed from '2'
to '3' because the VDR prototype now has 3 DVB cards (and currently the CAM
module only works if it is inserted into the last DVB card).
- The "Now", "Next" and "Schedule" menus now remember the current channel and
restore the list when switching between them.
- The "Green" button in the "Recordings" menu can now be used to rewind a
recording and play it from the very beginning.
- Fixed handling ':' in timer filenames and '\n' in timer summaries (see FORMATS).
- When removing recordings empty directories are now removed from the video
directory.
- Added the "schnitt" tools from Matthias Schniedermeyer.
- New SVDRP command MESG to display a short message on the OSD.
- The Perl script 'svdrpsend.pl' can be used to send SVDRP commands to VDR.
- SVDRP can now immediately reuse the same port if VDR is restarted.
- SVDRP now has a timeout after which the connection is automatically closed
(default is 300 seconds, can be changed in "Setup").
- The compile time switch VFAT can be used to make VDR avoid the ':' character
in file names (VFAT can't handle them). Do 'make VFAT=1' to enable this.
- Support for DVB-C (thanks to Hans-Peter Raschke and Peter Hofmann).
See the INSTALL file for more information about the use of VDR with cable.
- Fixed an occasional segfault in the EIT processor.
- A value of '0' for the EPGScanTimeout setup parameter now completely turns off
scanning for EPG data on both single and multiple card systems.
- New setup parameter "PrimaryLimit" that allows to prevent timers from using the
primary DVB interface in multi card systems. Default value is 0, which means
that every timer may use the primary interface.
- The 'active' field of a timer will now be explicitly set to '1' if the user
modifies an active timer (see FORMATS for details).
- The new command line option -w can be used to activate a watchdog that makes
VDR exit in case the main program loop does not respond for more than the
given number of seconds. This is mainly useful in combination with the new
'runvdr' script that restarts VDR in case is has exited.
|
|
- VDR now requires driver version 0.8.1 or higher.
- Recordings are now saved in PES mode. Note that you now need to install the
driver *WITHOUT* 'outstream=0'! This is the default when you 'make insmod' in
the DVB/driver directory.
Old recordings (in AV_PES mode) can still be replayed (as long as the driver
still supports replaying AV_PES files). The only limitation with this is that
in fast forward/back mode the picture may be slightly distorted and there may
be sound fragments.
- The EPG data is now dumped into the file /video/epg.data every ten minutes.
Use the Perl script 'epg2html.pl' to convert the raw EPG data into a simple
HTML programme listing.
- Fixed handling of channel switching with the "Blue" button in the "What's on
now/next?" menus.
- Fixed saving the MarginStop setup parameter.
- Fixed missing initialization in cConfig.
- Implemented "On Disk Editing".
- There is no more default 'timers.conf' file.
- Added Italian language texts (thanks to Alberto Carraro).
- Fixed starting a replay session when the program is currently in "transfer
mode".
- Fixed setting/modifying timers via SVDRP with empty summary fields.
- Fixed a problem with recordings that have a single quote character in their
name (this is now mapped to 0x01).
- Changed the value for Diseqc to '0' in the default 'channels.conf'.
- Fixed displaying channels and recording status in the RCU's LED display when
a recording is interrupted due to higher priority.
- Implemented safe writing of config files (first writes into a temporary file
and then renames it).
- In case the video data stream is broken the log message will come only every
5 seconds.
- The current channel is now saved in the 'setup.conf' file when VDR is cancelled,
and will be restored next time it is started (thanks to Deti Fliegl).
- The EIT scanning thread is now locked when switching channels to avoid problems.
- Encrypted channels can now be selected even without knowing the PNR (however, it
is still necessary for the EPG info).
|
|
- Date and time in the title of an event info page are now always right adjusted.
- The 'current channel' is now handled device specific (in case there is more
than one DVB card).
- The 'SetSystemTime' option in the "Setup" menu is now shown as "yes/no".
- Implemented "internationalization" (see 'i18n.c' for information on how to
add new languages). Thanks to Miha Setina for translating the OSD texts to
the Slovenian language.
- Fixed learning keys on the PC keyboard (display oscillated).
- Fixed a timing problem with OSD refresh and SVDRP.
- Avoiding multiple definitions of the same timer in the "Schedule" menu (this
could happen when pressing the "Red" button while editing the timer).
- There can now be a configuration file named 'commands.conf' that defines
commands that can be executed through the "Main" menu's "Commands" option
(see FORMATS for details on how to define these commands).
- Added a 'fixed' font for use with the output of system commands.
- The 'Priority' parameter of the timers is now also used to interrupt a low
priority timer recording if a higher priority timer wants to record.
- A timer recording on a DVB card with a CAM module will now be interrupted
by a timer that needs to use this specific DVB card to record an encrypted
channel, if the timer currently occupying this DVB card doesn't need the
CAM module (and thus can continue recording on a different DVB card).
- The "Yellow" button in the "What's on now/next?" menus now displays the
schedule of the current channel from that menu.
- All DVB cards in a multi-card system now write their EIT information into the
same data structure.
- If there is more than one DVB card in the system, the non-primary cards are
now used to periodically scan through the channels in order to keep the
EPG info up-to-date. Scanning kicks in after 60 seconds of user inactivity
(timeout in order to keep user interactions instantaneously) and each channel
that has the 'pnr' parameter defined in 'channels.conf' is switched to for
20 seconds. If there is only one DVB card in the system, that card will start
scanning after 5 hours (configurable through the "Setup" menu) of user inactivity
and will switch back to the channel it originally displayed at the first sign of
user activity. Any scanning will only occur if that particular card is not
currently recording or replaying.
- Now shifting the 'Subtitle' info into the 'ExtendedDescription' on stations
that don't send the EIT information correctly (like, e.g., 'VOX').
- Implemented a 10 seconds latency when removing files.
- Fixed unwanted reaction on the "Green" and "Yellow" button in the "Event" display.
- Implemented 'Transfer Mode' to display video data from the DVB card that actually
can receive a certain channel on the primary interface. This is currently in
an early state and may still cause some problems, but it appears to work nice
already.
|
|
- The EIT information is now gathered in a separate thread.
- The sytem time can now be synchronized to the time broadcast in the DVB data
stream. This can be enabled in the "Setup" menu by setting "SetSystemTime" to
1. Note that this works only if VDR is running under a user id that has
permisson to set the system time.
- The new item "Schedule" in the "Main" menu opens VDR's EPG (thanks to Robert
Schneider). See the MANUAL file for a detailed description.
- The new setup parameters MarginStart and MarginStop define how long (in
minutes) before the official start time of a broadcast VDR shall begin
recording, and how long after the official end time it shall stop recording.
These are used when a recording is programmed from the "Schedules" menu.
- The delay value in the dvb.c.071.diff patch to the driver has been increased
to '3', because on some systems the OSD was not displayed correctly. If you
are running an already patched version 0.71 driver and encounter problems
with the OSD, please make sure the parameter in the ddelay call is '3', not
'2'.
- Fixed initializing the RCU remote control code (didn't work after switching
on the system).
- Problematic characters in recording names (which can come from timers that
are programmed via the "Schedules" menu) are now replaced by suitable
substitutes.
|
|
- Remote control data is now received in a separate thread, which makes things
a lot smoother.
- Repeat and release of remote control keys is now explicitly distinguished.
- In replay mode the search forward/back and skip functions now have two modes:
Pressing the key shortly and releasing it starts the function, and pressing it
again stops it. Pressing and holding down the key starts the function and
releasing the key stops it.
- The '@' character that marks an "instant recording" can now be turned off
in the "Setup" menu (thanks to Matthias Schniedermeyer).
- Pressing the "Back" button while replaying now stops replaying and brings up
the "Recordings" menu (suggested by Carsten Koch). This can be used to easily
delete a recording after watching it, or to switch to a different recording.
- The "Recordings" menu now places the cursor on the last replayed recording, if
that file still exists.
- The "Blue" button in the "Main" menu can now be used to "Resume" a previously
stopped replay session (suggested by Martin Hammerschmid).
- The low and high LNB frequencies can now be changed in the "Setup" menu.
|
|
- The new "Setup" menu allows the user to configure several parameters to his/her
personal taste (see MANUAL for details).
- Workaround for a driver timing problem in cDvbApi::Cmd(), which sometimes caused
the OSD to no longer be displayed (thanks to Niels de Carpentier).
- Added the '-m486' option to the compiler call.
- If a channel name contains a colon (':') it is now replaced with a '|' in
channels.conf.
- Not everybody appears to like the "page scrolling" mechanism introduced by
Heino Goldenstein in version 0.61, so this is now configurable via the "Setup"
menu.
- The new 'dvbrc2vdr' tool (thanks to Plamen Ganev!) can be used to convert
'dvbrc' channel files into 'vdr' format.
- Channels can now be "grouped" (thanks to Plamen Ganev!). See MANUAL for details.
There is currently no mechanism to define and maintain "Channel groups" via
the menu, so you'll have to insert "Channel group" control lines into your
'channels.conf' file manually (for example with a text editor).
- Started a new file named FORMATS with a description of the various file
formats used by VDR.
- The "Primary DVB interface" can now be chosen via the "Setup" menu.
- Display of the "current/next" information when switching channels can now
be disabled via the "Setup" menu.
- The "current/next" display now only shows those lines that actually contain
information.
- When directly selecting a channel by entering the channel number, the digits
entered so far together with the name of that channel are displayed on the
OSD (suggested by Martin Hammerschmid).
|
|
- Support for more than one DVB card.
- Simultaneous record and replay (with two DVB cards).
- Instant recordings no longer get the name "instant". They now get the name
of the channel, with a prepended '@' character.
- Timers that are not given an explicit Name now use the channel name with
a prepended '@' character.
- If an instant recording is currently active, the Main menu now contains
an option to stop that recording.
- Timers are now only processed when the Menu is not active. So after editing
a timer the effect will take place only after the menu has been closed.
In order to avoid missing a timer event by inadvertently leaving the menu
open, the menu will be closed automatically after about two minutes of
inactivity.
- If a recording is currently being replayed, the Main menu now contains an
option to stop replaying.
- Displaying the recording DVB interface status in the decimal points of the
RCU display.
- Reduced the number of remote control keys. Modified the key assignments for
the PC keyboard to better resemble the "up-down-left-right-ok" layout on
menu controlling remote control units.
|
|
- Changed name from 'osm' to 'vdr' to avoid mixups with the 'oms' program that
appears to be in use with DVD replay.
- Implemented a channel display in the top menu line.
- Implemented replay progress display (press "Ok" when replaying to bring it up).
- Implemented direct channel selecting by pressing the numeric keys.
- Added several 'const' keywords to please stricter compilers.
- The repeat function for the remote control no longer adapts dynamically
to the timing of the RCU (this sometimes caused the repeat function to
kick in too early).
- Channel selection is now blocked when recording or replaying.
- Improved process handling.
|
|
- Fixed compilation with only DEBUG_REMOTE=1.
- Menus now use colors.
- Support for "Red", "Green", "Yellow", "Blue" buttons.
- Channels and Timers can now be added, deleted and moved.
- Basic record/play file handling support (no actual record/playback yet).
|
|
|
