summaryrefslogtreecommitdiff
path: root/menuitems.c
AgeCommit message (Collapse)Author
2006-02-19Version 1.3.43vdr-1.3.43Klaus Schmidinger
- Removed an unnecessary toFile->SetReadAhead() from cutter.c (thanks to Artur Skawina). - The "Back" key now restores the original string when pressed while editing a string item (suggested by Markus Hahn). - Now stopping scanning the video directory if there are too many levels of symbolic links, which might indicate a recursive link loop (based on a patch from Helmut Auer). - Improved OSD area handling in cDvbSpuDecoder (thanks to Marco Schlüßler). - Now logging the description (if present) in case a thread is canceled (suggested by Marco Schlüßler). - cMenuText now uses the given font (thanks to Rolf Ahrenberg). - The ST:TNG skin now uses the fixed font if requested when displaying texts. - Fixed some typos in the CONTRIBUTORS file (thanks to Frank Krömmelbein). - Changed offset and size handling in 'libsi' from 'unsigned' to 'signed', so that overflows can be better detected (thanks to Marcel Wiesweg). - Checking data size in CaDescriptor::Parse() and LinkageDescriptor::Parse() of 'libsi' to avoid crashes with invalid data (thanks to Marcel Wiesweg). - Made CharArray::DataOwnData::assign() in 'libsi' more robust against invalid data (suggested by Oliver Endriss). Also changed CharArray::DataOwnData::Delete() so that it sets 'size' and 'data' to 0. - Now resetting the channel number if the number entered through the numeric keys exceeds the maximum channel number (thanks to Rolf Ahrenberg). - The language code in the 'X' component records of EPG data can now consist of two codes, separated by '+'. - If a recording starts and there is no EPG data available for the recorded channel, the 'X' audio component records for the 'info.vdr' file are now generated from the channel's PID data. - Externally provided EPG data (with table ID 0x00) now gets its component descriptors set from the broadcast data, so that language codes and descriptions are available (suggested by Andreas Brugger). - When setting the audio track descriptions, the language codes are now also set in case this is a replay session (based on a patch from Rolf Ahrenberg). - If a recording starts and the channel's audio PID data has more language code information than the EPG's component data, the code from the channel is taken. - Fixed handling DPID when deciding whether to switch to 'Transfer Mode' (thanks to Marco Schlüßler). - Fixed replaying recordings of radio channels with many audio tracks (thanks to Reinhard Nissl). - Added a comment to tChannelID::nid, explaining that is is actually the "original" network id.
2006-02-05Version 1.3.42vdr-1.3.42Klaus Schmidinger
- Removed leftover 'needsBufferReserve' variable from cTransfer (thanks to Marco Schlüßler). - Fixed setting "No title" for broken event data (reported by Ronny Kornexl). - Fixed channel up/down switching on single card systems (reported by Stefan Huelswitt). - Fixed handling "pending" timers that blocked others that actually could record (reported by Thomas Koch). - Speeded up cVideoRepacker (thanks to Reinhard Nissl). - Added an 'Id' parameter to cDevice::PlayAudio() to allow plugins to easier process the audio data (thanks to Marco Schlüßler). - Added Czech language texts (thanks to Vladimír Bárta). Plugin authors may want to add the new entries to their I18N texts and contact the translators to have their texts translated. Note that there are now 21 different OSD languages, so please make sure you have 21 versions for each of your texts. - Updated the Polish OSD texts (thanks to Jaroslaw Swierczynski). - Fixed auto advance in string entry fields when pressing Up/Down in insert mode (reported by Udo Richter). - Fixed handling the "Setup/OSD/Menu button closes" option when set to 'yes' in case a replay is active (thanks to Udo Richter). - Improved cUnbufferedFile; USE_FADVISE is now defined in tools.c by default, so if you don't want to use "fadvise" you need to comment out that line (thanks to Artur Skawina). - Fixed a missing ',' in the Swedish OSD texts (thanks to Arthur Konovalov). - cDevice::Transferring() can now be used to determine whether the (primary) device is currently playing in Transfer Mode (based on a suggestion by Reinhard Nissl). - The 'runvdr' script no longer uses the $VDRUSR environment variable to set the user id under which 'vdr' shall run. Just add the '-u username' option when you call 'runvdr'. - Fixed multiple entries of the same subdirectory in the "Recordings" menu (reported by Christian Jacobsen). - Enabled generating a core dump if VDR is run with a different user id (thanks to Ville Skyttä). - Fixed handling the "Blue" key in the "Schedule" menu for the current channel (thanks to Rolf Ahrenberg). - Renamed the Makefile target 'plugins-clean' to 'clean-plugins' (suggested by Sebastian Frei). - Made all font and image data 'const' (thanks to Darren Salt). - Fixed scrolling with Up/Down in case there are non-selectable items at the beginning or end of the menu (reported by Helmut Auer). - Added cSkin::GetTextAreaWidth() and cSkin::GetTextAreaFont(), so that a plugin that wants to do special text formatting can do so (thanks to Alexander Rieger).
2006-01-22Version 1.3.40vdr-1.3.40Klaus Schmidinger
- Fixed a second place where a message should be given when an instant recording is started (reported by Jesus Bravo Alvarez). - Modified logging so that even on NPTL systems each line in the log file shows the individual thread's pid (based on a suggestion from Francois-Xavier Kowalski). - Fixed a problem with @plugin in keymacros.conf in case the named plugin is not loaded (reported by Franz Gangkofer). - Fixed a crash after executing the SVDRP command CLRE, caused by dangling 'schedule' pointers from cChannel objects (reported by Malte Schröder). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Improved NULL checking in strreplace(). - Fixed a crash in the Schedule menu with events that have no title (reported by Rolf Ahrenberg). cEvent::FixEpgBugs() now assigns a "No title" string to events that have no title. - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Recordings are now only started if there is at least 300MB free disk space (suggested by Markus Hahn). - When entering text via the numeric keys, the cursor now automatically advances (based on a patch from Rolf Ahrenberg). - Updated the Polish OSD texts and the fontosd-iso8859-2.c file (thanks to Jaroslaw Swierczynski). - Disabled the "buffer reserve" in Transfer Mode. Last chance to complain if you really need it - it will be completely removed in the next version. If you are experiencing problems with a/v running out of sync, try the latest driver and firmware (if you are using a full featured DVB card). - Switching channels with the Up/Down or Channel+/Channel- keys now works a lot faster when the repeat function kicks in, by not actually switching the channel every time, but rather only displaying the channel info and doing the final switch when the key is released. - The channel display is now updated _before_ the channel is switched. - Added a missing initialization of 'timeout' in the cDisplayChannel constructor. - Fixed detecting if there can be any useful further input when entering channel numbers (thanks to Thomas Bergwinkl). - Updated the Spanish OSD texts (thanks to Jesus Bravo Alvarez). - Fixed handling the '0' key for switching between the last two channels (thanks to Thomas Bergwinkl).
2006-01-08Version 1.3.38vdr-1.3.38Klaus Schmidinger
- Fixed handling second audio and Dolby Digital PIDs for encrypted channels (was broken in version 1.3.37). - Improved TS/PES conversion to better handle lost TS packets (thanks to Reinhard Nissl). - Limited the frequency of log messages from the cRepackers. - Now using the gettid() syscall to get a thread's pid, so that we get a useful value on NPTL systems (suggested by Johannes Stezenbach). - Fixed the RCU remote control handling to avoid problems with NPTL (thanks to Andreas Share for reporting a lockup with the RCU on NPTL systems). - When displaying the amount of free disk space, the space consumed by recordings that have been "deleted" but not yet actually "removed" is now taken into account (suggested by Christian Vogt). - Now avoiding unnecessary disk access when checking if there are deleted recordings that need to be removed (reported by Carsten Koch). - Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now a deleted recording is retained at least DELETEDLIFETIME seconds before actually removing it. The value of DELETEDLIFETIME has been changed to 300. So after (possibly inadvertently) deleting a recording, there will be at least 5 minutes in which it can be recovered (unless a new recording immediately requires the disk space). The count starts again at 0 every time VDR is started. - Fixed a possible crash when displaying the "Low disk space!" message from a background thread (thanks to Christof Steininger). - Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler). - Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground and background threads won't interfere. - The main menu now dynamically updates its contents in case an instant recording or replay stops, etc. - The version number of EPG events is now also stored in the epg.data file (thanks to Kendy Kutzner). - EPG events that are no longer in the currently broadcasted data stream are now automatically deleted. - Removed an invalid access to Event->schedule in cSchedule::DelEvent(). - Modified cSchedule::Cleanup() (events are always sorted by time). - Schedules are now cleaned up once every hour (not only at 05:00). - The "Schedule" and "What's on now/next?" menus are now updated if a timer is set or modified. - cTimer no longer has its own 'schedule' member, it rather uses that of the event it has been set to. - The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus now immediately creates a timer for the selected event and marks it with 'T'. If the event is already marked with 'T', the "Red" button opens the "Edit timer" menu for that timer. - Removing deleted recordings is now done in a separate thread. - Dropped the unused "stop recording on primary interface" stuff. - Converting a grabbed image to JPEG is now done with the new function RgbToJpeg() (see tools.h). - The SVDRP command GRAB now determines the image type (JPEG or PNM) from the extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit 'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but has no meaning any more. - The function cDevice::GrabImage() no longer writes the grabbed image to a file, but rather returns a pointer to the image in memory. The wrapper function cDevice::GrabImageFile() can be used to write the grabbed image directly to a file. Plugins that used the old version of cDevice::GrabImage() need to be adapted to the new interface. - The new class cBase64Encoder (see tools.h) can be used to encode data in base64 (thanks to Bob Withers for publishing his Base64 class). - The SVDRP command GRAB now writes the image data to the SVDRP connection (encoded in base64) if the given file name consists of only the file extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file name (based on a suggestion from Darren Salt). A simple way of viewing a grabbed image on a remote host is: svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display - - The new command line option '-g' must be given if the SVDRP command GRAB shall be allowed to write image files to disk. The parameter to this option must be the full path name of an existing directory, without any "..", double '/' or symlinks. By default, or if "-g- is given, grabbing to files is not allowed any more because of potential security risks. - Modified the way the SVDRP command GRAB writes the grabbed image to a file to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino Peña): + The file handle is now opened in a way that it won't follow symbolic links (suggested by Darren Salt). + The given file name is now canonicalized, so that it won't contain any ".." or symlinks (suggested by Darren Salt). + Grabbing to files is limited to the directory given in the the command line option '-g'. By default grabbing to files is not allowed any more. - Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos). - Changed all "illegal" to "invalid" in error messages (there's nothing "illegal" in VDR ;-). - When started as user 'root' VDR now switches to a lesser privileged user id, keeping the capability to set the system time (based on a patch from Ludwig Nussel). By default the user id 'vdr' is used, which can be changed through the new command line option '-u'. Note that for security reasons VDR will no longer run as user 'root' (unless you explicitly start it with '-u root', but this is not recommended!). The 'runvdr' script has been changed to use the '-u' option. - Changed the API of the functions cStatus::Recording() and cStatus::Replaying(), so that they can provide the full file name of the recording. Plugins that use these (or the related cStatus::Msg...() functions) need to be adapted (suggested by Andreas Brugger). - The DVB devices now retune (and, if applicable, resend the DiSEqC data) if the lock is lost (based on a patch from Reinhard Nissl). - Fixed handling multi byte key sequences in cKbdRemote (based on a patch from Jürgen Schneider). - Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco Schlüßler). - Made the static cControl functions thread safe (thanks to Patrick Fischer). - Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid warnings with g++ 4.1.0 (thanks to Ville Skyttä). - Fixed incrementing the 'state' variables in the repacker classes in remux.c to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä). - The Makefile now reports a summary of failed plugins (thanks to Udo Richter). - The cTimer constructor can now take an optional cChannel (suggested by Patrick Fischer). - Fixed setting the main thread id if VDR is running as a daemon. - Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl). - Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner). - Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger). - Now using FE_READ_STATUS to read the current frontend status (suggested by Holger Wächtler). - The "Menu" key now behaves consistently. If there is anything on the OSD, it is closed when the "Menu" key is pressed, and if there is nothing on the OSD, the "Menu" key opens the main menu (suggested by Luca Olivetti). - The new option "Setup/OSD/Timeout requested channel info" can be used to turn off the automatic timeout of the channel display in case it was invoked by a press of the "Ok" key (suggested by Thiemo Gehrke). - A message is now given when an instant recording is started (suggested by Helmut Auer). Actually the code was already there, just commented out - don't remember why it wasn't active... - Removed an obsolete "Summary" text from i18n.c and preceded all key definition texts with "Key$" to avoid duplicates (reported by Lucian Muresan). - Preceded all button texts with "Button$". - Removed obsolete "Eject", "Language" and "scanning recordings..." texts. - Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill). - Disabled the use of "fadvise" in cUnbufferedFile because there have been several reports that it causes more problems than it solves (suggested by Petri Hintukainen). If you want to use "fadvise", you can activate the line //#define USE_FADVISE in tools.c. - Removed unused 'offset' member from cOsdItem. - In the "Channels" menu the numeric keys now position the cursor to the channel with the given number (see MANUAL, section "Remote Control Keys", note (3) for details). - The "Mark/Move" function in the "Channels" menu now also works in the non-numeric sort modes. - The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if this is a menu. - The new "Info" key brings up information on the currently viewed programme or recording. For a live programme this is the same as "Schedule/Ok", i.e. the description of the current EPG event. For a recording this is the same as shown by the "Info" button in the "Recordings" menu. Plugins that implement players can overwrite their cControl::GetInfo() function to show their own info (see PLUGINS.html for details). Pressing the "Info" key again while the info is displayed will close the OSD. In order to assign this new key to an existing remote control setup, the remote.conf file needs to be deleted and VDR has to be restarted to go through the process of learning the remote control keys. - Any cReceivers still attached to a cDevice when that device switches to a different transponder are now automatically detached (suggested by Patrick Fischer). - The "flags" of a timer are now handled as an unsigned integer value. In order to do this, the interface of cMenuEditBitItem also had to be changed. - In string entry fields (like, e.g., the file name of a recording) the characters can now be entered by pressing the numeric keys, the same way as on a telephone keypad (based on the "Easy Input" patch from Marcel Schaeben). - Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch from "single shot" to "weekly", followed by the "Right" key (reported by Andreas Böttger). - The file 'ca.conf' is obsolete and has been removed. - Revised all descriptions regarding CICAM. - Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling. - Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack() (thanks to Reinhard Nissl). - Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo Schneider). - Cleaned up some trailing white space.
2005-11-27Version 1.3.37vdr-1.3.37Klaus Schmidinger
- Added compiler options "-fPIC -g" to all plugins (thanks to Rolf Ahrenberg). - Fixed initializing the day index when editing the weekday parameter of a repeating timer (thanks to Marco Schlüßler). - No longer removing superfluous hyphens in EPG data - would become too language dependent to handle all kinds of exceptions. - Modified switching to Dolby Digital audio in live mode, if the driver and firmware can handle live DD without the need of a Transfer Mode (thanks to Werner Fink). Live DD mode requires a full featured DVB card and a LinuxDVB driver with firmware version 0x2622 or higher. Older versions will use Transfer Mode just like before. - Implemented handling of the "CA PMT Reply" for CAMs (thanks to Marco Schlüßler for figuring out some obscure length bytes in the CA PMT Reply data of AlphaCrypt CAMs). - Some preparations for being able to record several encrypted channels from the same transponder at the same time (or record and view different encrypted channels), provided the CAM in use can handle this. This is work in progress and isn't actively used, yet. - Fixed SetProgress() in the 'skincurses' plugin in case Total is 0 (reported by Stefan Huelswitt). - Added a copy constructor to cString and fixed its assignment operator (thanks to Holger Brunn). - The new function Skins.QueueMessage() can be called from a background thread to queue a message for display. See VDR/skins.h for details. - The SVDRP command MESG uses the new message queueing facility, so MESG commands may now be executed at any time, and the message will be displayed (no more "pending message").
2005-09-25Version 1.3.33vdr-1.3.33Klaus Schmidinger
- Fixed two errors in 'newplugin' (thanks to Alexander Rieger). - Fixed converting arbitrarily formatted summary.vdr files (thanks to Thomas Günther). - Fixed handling color buttons in cMenuEditStrItem (thanks to Alexander Rieger). - Added cChannel::LinkChannels() and cChannel::RefChannel() (suggested by Helmut Auer). Note that VDR itself doesn't actually use the linked channels, yet, so there is no guarantee that this really works under all circumstances. - Added a missing include statement to the 'sky' plugin (thanks to Alfred Zastrow for reporting this one). - Fixed handling key macros with keys after @plugin (thanks to Rolf Ahrenberg for reporting this one). - Fixed error handling in cCiTransportConnection::RecvTPDU() (thanks to Georg Acher for reporting this one). - Removed obsolete 'shift' code in device.[hc]. - The SVDRP command DELR no longer triggers a complete reload of the global Recordings list, but rather deletes that particular entry. - The list of recordings is now read in a separate thread, resulting in a faster startup if there are a great many of recordings, or the disk(s) have to spin up. If the Recordings menu is opened while the list of recordings is still being read, the menu will be updated accordingly. Plugins that access the global Recordings variable should lock the thread by putting something like cThreadLock RecordingsLock(&Recordings); into the respective code block. Thanks to Carsten Koch for his help in testing and debugging this. - The 'new' indicator in the Recordings menu is now kept up-to-date (thanks to Thomas Günther). - Updated the Romanian OSD texts (thanks to Lucian Muresan). - Updated the Russian OSD texts (thanks to Oleg Roitburd). - The '.update' file in the video directory is now touched when a recording is added or deleted, so that other VDR instances can update their lists (thanks to Alexander Rieger). - Made the function ExchangeChars() public (suggested by Lucian Muresan).
2005-03-20Version 1.3.23vdr-1.3.23Klaus Schmidinger
- The setup option "DVB/Video display format" is now only available if "Video format" is set to "4:3" (suggested by Mikko Salo). - Updated the Russian OSD texts (thanks to Vyacheslav Dikonov). - Dropped CA support for the old '-icam' firmware. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Updated the Swedish OSD texts (thanks to Tomas Prybil). - Fixed a few French OSD texts that were in the wrong place. - Improved matching timers to EPG events, especially in case there are several events with the same VPS time. - Fixed cDolbyRepacker to allow recording ProSieben HD broadcasts (thanks to Reinhard Nissl). - Fixed cDvbDevice::SetVideoDisplayFormat() in case of 16:9 (thanks to Marco Schlüßler). - The running status of a VPS event is now only taken seriously if that event has been seen within the last 30 seconds - otherwise recording is done as if no VPS was available. - The day of a timer is now stored as a full date in ISO notation ("YYYY-MM-DD") in 'timers.conf' and for the result of the SVDRP command LSTT (based in parts on a patch by Roman Krenický). - Some fixes to avoid compiler warnings in gcc 4.0 (thanks to Ville Skyttä for reporting these). - Single shot timers are now reliably deleted when they have expired. - Fixed setting the colored button help after deleting a recording in case the next menu entry is a directory (thanks to Steffen Beyer). - Improved falling back to normal recording if the VPS data hasn't been seen for more than 30 seconds. - Added a missing cMutexLock to cRemote::HasKeys() (thanks to Wolfgang Rohdewald). - All log entries regarding timers now contain a short description of the timer.
2004-11-21Version 1.3.17vdr-1.3.17Klaus Schmidinger
- Fixed cRemux::ScanVideoPacket() to make sure it doesn't access memory beyond the end of the given buffer, which has caused some unjustified "unknown picture type errors" (thanks to Marco Schlüßler). - Fixed a possible crash when pausing live video and the recording was unable to start, maybe because there was no lock on the device (thanks to Andreas Brugger for reporting this one). - Fixed some characters in the iso8859-2 font file (thanks to Dino Ravnic). - Fixed some errors in the Croatian language texts (thanks to Dino Ravnic). - Fixed a possible recursion in cControl::Shutdown() (thanks to Sascha Volkenandt). - Now setting the VPID before the APID in live mode to avoid unnecessary overhead in the firmware (thanks to Werner Fink). - Now checking available OSD memory at runtime (thanks to Oliver Endriss). - Fixed some typos in the Makefile's 'font' target (thanks to Olaf Titz). - Fixed handling childTid in cThread to avoid possible race conditions (thanks to Stefan Huelswitt for pointing this out). - Fixed toggling the "Day" item in the "Timers" menu, so that it selects the right day of week for timers in the future. - Some improvements to cPoller (thanks to Marco Schlüßler).
2004-11-14Version 1.3.16vdr-1.3.16Klaus Schmidinger
- Fixed cChannel::SetName() in case only the ShortName or Provider has changed (thanks to Sascha Volkenandt for reporting this one). - Added Danish language texts (thanks to Mogens Elneff). - Reactivated the NPTL check at startup because there appear to be still unsolved problems when running on NPTL systems. - Added missing calls to cStatus::MsgOsdClear() in cSkins::Message() (thanks to Joachim Wilke for reporting this one, and Andreas Regel for additional input). - Fixed the cDvbSpuDecoder (thanks to Marco Schlüßler). - Fixed handling of pmAudioOnlyBlack (thanks to Stefan Huelswitt). - Fixed a short glitch when starting a recording on the primary device while in replay or transfer mode (thanks to Marco Schlüßler). - Added missing initialization of cEvent::seen. - Checking PID language codes for ISO 639 compliance to avoid problems with funny characters. Invalid language codes will be stored as "???". - The '0' key now toggles the "Day" item in the "Timers" menu between "single shot" and "repeating". The keys '1'...'7' can be used to toggle the individual days ('1' is Monday). Thanks to Sascha Klek for reporting a problem with the '0' key in the "Day" item of the "Timers" menu.
2004-06-19Version 1.3.11vdr-1.3.11Klaus Schmidinger
- In order to avoid problems on NPTL systems, VDR now checks for the presence of NPTL at program start, and if it is, exits and tells the user to do 'export LD_ASSUME_KERNEL=2.4.1' before starting VDR. - Revisited the "Fixed missing audio after replaying a DVD" change because it introduced a sound disturbance when switching between channels on the same transponder (thanks to Marco Schlüßler). - In order to avoid problems on UTF-8 systems, VDR now checks for the presence of UTF-8 at program start, and if it is, exits and tells the user to turn off UTF-8 before starting VDR (thanks to Ludwig Nussel for pointing out a problem with systems that are set to use UTF-8). There are also problems in case the video partition is mounted with "iocharset=utf8" (thanks to Jörg Knitter for reporting this one). Please also read the "IMPORTANT NOTES" section in the INSTALL file! - Some changes to the SPU decoder interface (thanks to Sven Goethel). - Some improvements in cOsd creation (thanks to some suggestions by Jouni Karvo). - Fixed calculating the OSD width and height (thanks to Olaf Henkel for reporting a problem with long event texts in the "Classic VDR" skin). - Fixed switching channels while an encrypted channel is being recorded, because the channel was switched if the new channel was on the same transponder and was a radio channel or an unencrypted channel (thanks to Martin Dauskardt for reporting this one). - No longer using the external 'find' command to scan the video directory for recordings (based on a suggestion by Mirko Dölle). - The list of recordings is now kept statically in memory to avoid long delays when opening the "Recordings" menu. As a side effect, external modifications to the video directory are no longer immediately reflected in the "Recordings" menu. If a plugin manipulates the video directory in any way, it can call the function Recordings.TriggerUpdate() to trigger an update of the list of recordings. If some external tool manipulates the video directory, it can touch the file '.update' in the video directory to trigger an update of the list of recordings. - Fixed a memory leak in theme description handling (thanks to Sascha Volkenandt). - Added cDevice::Flush() to make sure that all data in the video card's buffers has been processed (thanks to Reinhard Nissl). Currently this is not yet actually implemented for FF DVB cards. - Fixed handling the color button texts in cMenuEditStrItem (thanks to Maynard Cedric for reporting this one). - Fixed the description of cRingBufferLinear (thanks to Ludwig Nussel for pointing out this one). - Fixed cRingBufferLinear::Get() in case the buffer wraps around (thanks to Ludwig Nussel for reporting this one).
2004-05-16Version 1.3.7vdr-1.3.7Klaus Schmidinger
- Fixed a memory leak in thread handling when using NPTL (thanks to Jon Burgess). - Fixed handling Setup.RecordDolbyDigital, which was broken since version 1.1.6. - Fixed handling text lengths for itemized EPG texts (thanks to Marcel Wiesweg). - Fixed the help for LSTE and LSTR (was broken in 1.3.6). - Improved iso8859-7 fonts (thanks to Dimitrios Dimitrakos). - Added some 3-letter language codes (thanks to Marcus Mönnig). - Added language code handling to the subtitling descriptor in 'libsi' (thanks to Pekka Virtanen). - Moved several menu item classes from menu.c to menuitems.[hc] to make them available for plugins. - The epg2html.pl script now handles '|' in description texts. - The new setup option "OSD/Use small font" can be used to control the use of the small font (see MANUAL for details). - Swapped osd.[hc] and osdbase.[hc] to have the virtual OSD base class named cOsd. Plugins may need to adjust their #include statements. - Colors are now given as AARRGGBB instead of AABBGGRR. The values are mapped to the driver's (wrong) sequence in dvbosd.c (this should really be fixed in the driver, together with the endian problem). - The new OSD setup parameters "Left" and "Top" can be used to define the top left corner of the OSD. - The OSD size parameters are now in pixel (as opposed to formerly characters). When reading a 'setup.conf' file from an older version of VDR, the OSDwidth and OSDheight values will be converted to pixel automatically. - The OSD is now fully device independent. See the comments in VDR/osd.h and the description in PLUGINS.html for information on how a plugin can implement an OSD display on arbitrary hardware. - The OSD (actually its cBitmap class) can now handle XPM files. There are several XPM files in the VDR/symbols directory which can be used by skins (some of these have been taken from the "elchi" patch). See VDR/skinsttng.c for examples on how to use these. - Due to the changes in the OSD handling the DEBUG_OSD option for a textual OSD has been dropped. There will be a plugin that implements a skin with this functionality later. - The entire OSD display can now be implemented via "skins". See VDR/skins.[hc], VDR/skinclassic.[hc], VDR/skinsttng.[hc] and PLUGINS.html for information on how a plugin can implement its own skin. By default VDR comes with a "Classic" skin that implements the OSD display known from previous versions, and the new skin named "ST:TNG Panels", which is also the default skin now. The actual skin can be selected through "Setup/OSD/Skin". - The colors used in a skin can now be configured using "themes". See PLUGINS.html for information on how a skin can make use of themes, and man vdr(5) for the structure of a theme file. The actual theme to use can be selected through "Setup/OSD/Theme". - Added Croatian language texts (thanks to Drazen Dupor). NOTE: there is apparently a problem with the newly introduced iso8859-2 font, because as soon as Setup/OSD/Language is set to Croatian (currently the last one in the list) everything freezes and the vdr processes have to be killed with -9 and the driver needs to be reloaded. Maybe somebody else can find out what's going wrong here... - Added missing NULL checks when accessing sectionHandler in device.c (thanks to Pekka Virtanen). - Fixed setting the time from the DVB data stream (thanks to Helmut Auer for pointing out a frequency/transponder handling mixup). This now also takes the actual source (sat, cable etc.) into account. Please go into "Setup/EPG" and set the "Set system time" and "Use time from transponder" parameters accordingly (this is necessary even if you have already set them before!).
2004-03-14Version 1.3.6vdr-1.3.6Klaus Schmidinger
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed some descriptor handling in 'libsi' (thanks to Stéphane Esté-Gracias). - Fixed handling the current menu item (thanks to Marc Hoppe). - Fixed assigning events to timers (they no longer get "stuck"). - Added log entries whenever the running status of an event changes (currently only logging the first 30 channels). - Fixed handling timers in VPS margin if the EPG scan is turned on (the EPG scan switched the device away from the channel, so it wouldn't see the change of the running status). - Fixed handling "itemized" texts in EPG data (thanks to Stéphane Esté-Gracias for pointing out this problem, and Marcel Wiesweg for improving 'libsi'). - Fixed handling VPS times at year boundaries. - Avoiding too many consecutive "ring buffer overflow" messages (which only slowed down performance even more). - Taking the Sid into account when detecting version changes in processing the PMT (thanks to Stéphane Esté-Gracias for pointing out this problem). - Completed the Russian OSD texts (thanks to Vyacheslav Dikonov). - Any newline characters in the 'description' of EPG events are now preserved to allow texts to be displayed the way the tv stations have formatted them. This was also necessary to better display itemized texts. - Fixed detecting the running status in case an empty EPG event is broadcast (thanks to Michael Pennewiß for pointing this out). - Improved performance when paging through very long menu lists. - Removed cSchedule::GetEventNumber() and cSchedule::NumEvents(). There is now cSchedule::Events() that returns the list of events directly. - Avoiding occasional bad responsiveness to user interaction caused by assigning events to timers. - Now explicitly turning on the LNB power at startup, because newer drivers don't do this any more (thanks to Oliver Endriss for pointing this out).
2004-02-29Version 1.3.5vdr-1.3.5Klaus Schmidinger
- Fixed reading the EPG preferred language parameter from 'setup.conf'. - Fixed switching to a visible programme in case the current channel has neither a video nor an audio PID. - Fixed editing channels (SID now range checked) and creating new channels (NID, TID and RID are now set to 0). - Fixed transponder handling to make it work with satellites that provide two transponders on the same frequency, with different polarization, like Hispasat at S30.0W (thanks to Thomas Bergwinkl for pointing this out). See man vdr(5) for details about the enhanced channel ID format. - Since there appears to be no general solution for the UPT error yet, a recording now initiates an "emergency exit" if the number of UPT errors during one recording exceeds 10 (suggested by Gregoire Favre). Since the UPT error doesn't happen on my system, this has not been explicitly tested. The "preliminary fix" for the UPT error in VDR/dvbdevice.c has been disabled by default, since it makes channel switching unpleasently slow. If you want to have that workaround back, you can uncomment the line //#define WAIT_FOR_LOCK_AFTER_TUNING 1 in VDR/dvbdevice.c. - Adapted the 'sky' plugin to use the actual channel IDs, and to fetch EPG data from www.bleb.org. - Limited automatic retuning to devices that actually provide the transponder (necessary for the 'sky' plugin). - Fixed handling receivers in the 'sky' plugin, so that a recording on the same channel won't interrupt an ongoing Transfer Mode. - Added subtable ID and TSDT handling to 'libsi' (thanks to Marcel Wiesweg). - Fixed some Russian OSD texts (thanks to Vyacheslav Dikonov). - Added the 'running status' to the EPG events. This is necessary for implementing the VPS function for recording. - Removed the obsolete 'present' and 'following' handling from the EPG data. - The EPG data is now always kept sorted chronologically in the internal data structures. This also means that any EPG data retrieved through the SVRDP command LSTE is guaranteed to be sorted by start time. - Now using the 'running status' in the channel display, so that a programme that has an end time that is before the current time, but is still running, will still be shown in the display (provided the broadcasters handle the 'running status' flag correctly). This also applies to programmes that have a start time that is in the future, but are already running. - Implemented an "EPG linger time", which can be set to have older EPG information still displayed in the "Schedule" menu (thanks to Jaakko Hyvätti). - Added PDCDescriptor handling to 'libsi'. - Implemented handling the VPS timestamps (aka "Programme Identification Label") for full VPS support for timers (provided the tv stations actually broadcast this information). The VPS time is displayed in the event info page if it exists and is different than the event's start time. - Extended the SVDRP command LSTE to allow limiting the listed data to a given channel, the present or following events, or events at a given time (thanks to Thomas Heiligenmann). - Fixed a typo in libsi/si.h (thanks to Stéphane Esté-Gracias). - Timers can now be set to use the VPS information to control recording a programme. The new setup options "Recording/Use VPS" and "Recording/VPS margin", as well as the "VPS" option in the individual timers, can be used to control this feature (see MANUAL for details). Note that this feature will certainly need a lot of testing before it can be called "safe"! - The "Schedule" and "What's on now/next?" menus now have an additional column which displays information on whether there is a timer defined for an event, whether an event has a VPS time that's different than its start time, and whether an event is currently running (see MANUAL under "The "Schedule" Menu" for details).
2004-01-25Version 1.3.3vdr-1.3.3Klaus Schmidinger
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added ISO639LanguageDescriptor to 'libsi'. - Changed the 'languageCode' members in the descriptor classes of 'libsi' to 'char[4]' and setting the 4th byte to 0 for easier handling. - Fixed frequency handling when setting the CA descriptors in cDvbTuner::Action() (thanks to Jan Ekholm for reporting and helping to debug this one). - Now setting CA descriptors even if "Setup/DVB/Update channels" is less than 2. - There can now be up to 32 audio and Dolby PIDs (however, currently still only the first two are used throughout the rest of the program). - The audio and Dolby PIDs in 'channels.conf' now can have an optional language code (see man vdr(5)). Currently this is only stored and not yet used otherwise. - Added a call to cStatus::MsgOsdCurrentItem() to cMenuEditItem::SetValue() (thanks to Martin Hammerschmid).
2003-04-13Version 1.1.27vdr-1.1.27Klaus Schmidinger
- The CAM is now accessed only if the current channel actually has a non-zero Ca value, and CAM access is completely suppressed during replay, which avoids problems in case the CAM is attached to the primary DVB device. - The "Left" and "Right" buttons now set the cursor to the first or last list item even if the list consist only of a single page, like, for instance, the Main menu (thanks to Oliver Endriss). - Made the log message "OSD window width must be a multiple of 4..." a debug message instead of an error message, so it can be avoided by using a log level less than 3. - Updated Greek language texts (thanks to Dimitrios Dimitrakos). - Fixed faulty behaviour of the "Mute" key in case the channel display is visible (thanks to Florian Bartels for reporting this one and Sascha Volkenandt for helping to fix it). - Modified LOF handling to allow for C-band reception (thanks to Malcolm Caldwell). - Added some missing cAudio handling calls (thanks to Werner Fink). - Replaced the 'for' loops in StripAudioPackets() with memset() calls (thanks to Werner Fink). - Further increased the timeout until an index file is considerd no longer to be written. - Fixed a crash in case the index file can't be accessed any more during replay (thanks to Stefan Huelswitt for reporting this one). - Fixed displaying messages in the status line in case they exceed the OSD width (thanks to Gerhard Steiner for reporting this one). - Avoiding high CPU load in case the connection to LIRC gets lost (thanks to Ludwig Nussel). - Fixed handling repeat function with LIRC (thanks to Ludwig Nussel). - Fixed handling min/max borders when entering integer values (thanks to Andy Grobb for reporting this one). - Implemented a "resume ID" which allows several users to each have their own resume.vdr files (thanks to Martin Hammerschmid). This parameter can be set in the "Setup/Replay" menu (see MANUAL for details). - Now using 'libdtv' version 0.0.5 (thanks to Rolf Hakenes for the new version and Stefan Huelswitt for adapting VDR to it). - If no device with an MPEG decoder can be found at startup, the first device is now used as primary device (just to have some device). - Adjusted some Premiere channels in 'channels.conf' (thanks to Thomas Koch). - Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt). - The 'epg.data' file is now read after all plugins have been started (thanks to Sascha Volkenandt). - The LIRC remote control no longer tries to learn keys if it can't connect to the LIRC daemon (thanks to Ludwig Nussel for reporting this one). The same applies to the RCU remote control in case of errors during startup. - Fixed handling of Ca parameters with values <= MAXDEVICES, which don't indicate an actual encrypted channel (thanks to Stefan Huelswitt for reporting this one).
2003-01-26Version 1.1.22vdr-1.1.22Klaus Schmidinger
- Added 'Hrvatska radiotelevizija' and 'RTV Slovenija' to ca.conf (thanks to Paul Gohn). - Implemented actual user input for CAM enquiry menus. - Since disk file systems apparently don't honor the O_NONBLOCK flag to read from a file in non-blocking mode the cDvbPlayer now uses a non blocking file reader class to make sure replay remains smooth even under heavy system load. - Increased the maximum possible packet size in remux.c to avoid corrupted streams with broadcasters that send extremely large PES packets (thanks to Teemu Rantanen). - Added TS error checking to remux.c (thanks to Teemu Rantanen). - Modified cRingBufferLinear to avoid excessive memmove() calls in 'Transfer Mode' and during recordings, which dramatically reduces CPU load. Thanks to Teemu Rantanen for pinpointing the problem with the excessive memmove() calls. - Updated 'channels.conf' (thanks to Achim Lange). - Added/improved Swedish language texts (thanks to Jan Ekholm). - Fixed the description of the "Scroll pages" OSD setup parameter ('yes' and 'no' were mixed up). - Fixed handling the LOG_LOCALn parameters in the -l option (thanks to Dimitrios Dimitrakos). - Changed EIT processing to always read a full section. - Fixed handling user defined CFLAGS in libdtv/libvdr/Makefile (thanks to Clemens Kirchgatterer and Robert Schiele). - Fixed skipping unavailable channels in the EPG scanner.
2002-12-15Version 1.1.20vdr-1.1.20Klaus Schmidinger
- Now checking if there is a connection to the keyboard (thanks to Jaakko Hyvätti) and only creating the KBD remote control if VDR is running in the foreground. - Fixed taking an active SVDRP connection into account when doing shutdown (thanks to Gregoire Favre for reporting this one). - Changed setting of CXX and CXXFLAGS variables in Makefile, so that an externally defined value will be taken if present (suggested by Robert Schiele). Plugin authors should please change the lines CXX = g++ CXXFLAGS = -O2 -Wall -Woverloaded-virtual in their Makefile to CXX ?= g++ CXXFLAGS ?= -O2 -Wall -Woverloaded-virtual - Fixed recording overlapping timers on the same channel in case DO_REC_AND_PLAY_ON_PRIMARY_DEVICE and/or DO_MULTIPLE_RECORDINGS is not defined (thanks to Jaakko Hyvätti). - No longer stopping/restarting the DMX when switching audio channels (thanks to Sven Goethel). - Fixed high CPU load in 'Transfer Mode' (thanks to Oliver Endriss). - If a PC keyboard is used as remote control, the string entry fields in the menus now accept character input directly (however, this works only for keys that are not otherwise defined as remote control keys). Also, plugins can switch the cKbdRemote class into "raw mode", where all keyboard input will be made available through the new 'kKbd' key code and none of it will be processed as normal remote control functions (thanks to Jan Rieger for suggestions and testing). - Fixed deleting characters in string entry fields in 'insert' mode. - Now using "Doxygen" to generate source documentation (thanks to Walter Stroebel for providing an initial 'Doxyfile' configuration and adjusting some comments). See INSTALL for information how to do this. Some function descriptions have already been adapted to Doxygen, more will follow.
2002-09-08Version 1.1.9vdr-1.1.9Klaus Schmidinger
- Fixed the 'newplugin' script to make it name the target for creating the distribution package 'dist', as stated in the PLUGINS.html documentation. If you have already created a plugin source directory and Makefile you may want to check it and replace the 'package' target with 'dist' if necessary. - Changed device handling for being able to do simultaneous recording and replay on the same device (Time Shifting). In order for this to work you need to use a driver with a firmware version that has this feature implemented. - cDevice::ProvidesCa() is no longer virtual. The new function cDevice::ProvidesChannel() is now used to determine whether a device can receive a given channel, and by default this function returns false. So a device that is a pure replaying device doesn't need to do anything here. - Increased the recorder buffer size to 5MB in order to be able to better handle multiple recordings. - Implemented cTSBuffer for better handling TS packet buffering in derived cDevice classes. - Changed the interface if cDevice::GetTSPacket() to avoid unnecessary copying of data. - Removed cDevice::Channel(), since this makes no more sense with devices receiving multiple channels. - Switching through channels with the 'Up' and 'Down' keys now skips channels that are currently not available (for instance because all devices are recording and these channels are on different transponders). - Implemented an SPU decoder (thanks to Andreas Schultz). - Fixed a crash when entering an integer value outside the limits (thanks to Stefan Huelswitt for reporting this one). - Added play mode pmAudioOnlyBlack (thanks to Stefan Huelswitt).
2002-08-16Version 1.1.7vdr-1.1.7Klaus Schmidinger
- Adapted VDR to the NEWSTRUCT driver. To use the new driver, compile VDR with 'make NEWSTRUCT=1' (thanks to Holger Wächtler for some valuable advice). By default it currently still uses the old driver. - Added some missing #includes (thanks to Martin Hammerschmid). - Changed the log error message "can't record MPEG1!" to "error in data stream!", since the mentioning of MPEG1 has irritated many people. - Consistently using malloc/free and new/delete (thanks to Andreas Schultz). - Temporarily made cDevice::ProvidesCa() virtual (Andreas Schultz needs this in his DXR3 plugin). - cDevice no longer exposes a file handle to cPlayer. A derived cPlayer class can now call DevicePoll() to see whether the replay device is ready for further data. A derived cDevice class must implement Poll() and shall check if any of its file handles is ready for data. - Implemented several replay modes to allow players that play only audio (thanks to Stefan Huelswitt). - Improved cCondVar::Wait() and implemented cCondVar::TimedWait() (thanks to Stefan Huelswitt). - VDR no longer gives up if there is no DVB device. It continues to work if there is at least one device, either a DVB device found by the core VDR code itself, or a device implemented by a plugin.
2002-06-16Version 1.1.3vdr-1.1.3Klaus Schmidinger
- Improved the VDR Makefile to avoid a warning if the '.dependencies' file does not exist, and also using $(MAKE) to call recursive makes. - Changed the name of the 'package' target in the plugin Makefiles to 'dist' (following the suggestions in the "GNU Make" manual). If you already have started a plugin project, you may want to change this in your Makefile accordingly. - Improved the plugin Makefile to avoid a warning if the '.dependencies' file does not exist, and also using $(shell...) to get the version numbers. If you already have started a plugin project, you may want to change this in your Makefile accordingly. - Fixed some function headers to make them compile with gcc 3.x (thanks to Gregoire Favre). - Fixed the cutting mechanism to make it re-sync in case a frame is larger than the buffer (thanks to Sven Grothklags). - Added an error message if the directory specified in the '-L' option can't be accessed (suggested by Stefan Huelswitt). - Rearranged OSD class names to make 'cOsd' available for the main OSD interface. - Completely moved OSD handling out of the cDvbApi class, into the new cOsd. - Implemented cStatus to allow plugins to set up a status monitor. See PLUGINS.html for details. - Moved the cEITScanner out of dvbapi.h/.c, into the new eitscan.h/.c. - Added Swedish language texts (thanks to Tomas Prybil). - Fixed parsing 'E' records in epg2html.pl (thanks to Matthias Fechner for pointing out this one). - Removed compiler option '-m486' to make it work on non-Intel platforms. If you have already started a plugin project, you may want to make sure you remove this option from your existing Makefile. - Completely rearranged the recording and replay functions to make them available to plugins. - Replay is now done in a single thread (no more syncing between input and output thread necessary). - It is now possible to record several channels on the same transponder with "budget cards". VDR automatically attaches a recording timer to a card that already records on the appropriate transponder. How many parallel recordings can actually be done depends on the computer's performance. Currently any number of recordings gets attached to a card, so you should carefully plan your timers to not exceed the limit. On a K6-II/450 it was possible to record three channels from transponder 12480 with a single WinTV NOVA-S. - Timers that record two successive shows on the same channel may now overlap and will use the same DVB card. During the time where both timers record the data is simply saved to both files. - The following limitations apply to this version: + Transfer mode doesn't work yet. + The '-a' option (for Dolby Digital audio) doesn't work yet. + Switching between different language tracks doesn't work yet. + Cutting doesn't work yet.
2002-05-11Version 1.1.1vdr-1.1.1Klaus Schmidinger
- Separated the actual DVB hardware OSD implementation from the abstract OSD interface. 'osdbase.c/.h' now implements the abstract OSD, while 'dvbosd.c/.h' is the actual implementation for the DVB hardware. This is in preparation for allowing additional kinds of OSD hardware implementations. - Fixed leftover references to the file FORMATS in MANUAL and svdrp.c. - Avoiding ambiguities in the cList template class in case one defines a "list of lists" (thanks to Stefan Huelswitt). - Simplified the basic cMenuSetupPage class for easier use in plugins. - Added setup parameters and a Setup menu to the 'hello' plugin example. - Fixed logging error message for unknown config parameters in plugins. - Rearranged cleanup sequence at the end of the main program. - Adapted PLUGINS.html to use the actual code examples from the 'hello' plugin.
2002-05-09Version 1.1.0vdr-1.1.0Klaus Schmidinger
- Begin of the 1.1 development branch. THIS IS NOT A STABLE VERSION! The current stable version for every day use is still the 1.0 branch. - First step towards a universal plugin interface. See the file PLUGINS.html for a detailed description. The man page vdr(1) describes the new options '-L' and '-P' used to load plugins. This first step implements the complete "outer" shell for plugins. The "inner" access to VDR data structures will follow. - The VDR version number is now displayed in the title line of the "Setup" menu.