| Age | Commit message (Collapse) | Author |
|---|
|
- Fixed checking for the presence of NPTL (thanks to Jouni Karvo).
- Making sure section filters are only set if the device actually has a lock
(thanks to Andreas Share for pointing this out).
- Fixed a possible NULL pointer assignment in cMenuText::SetText() (thanks to
Marco Schlüssler).
- Fixed a crash in case the last line in channels.conf is a group separator and
that group is selected in the channel display (thanks to Dick Streefland).
- Added cRingBufferLinear::Read() to read directly from a file handle into the
ring buffer.
- Using timeouts in ring buffers to avoid 'usleep()'.
- Clearing the 'Transfer Mode' ring buffer after clearing the device to avoid
an "almost full" ring buffer.
- Removed locking from cRingBufferLinear for better performance under high load.
- Using a cRingBufferLinear in cRemux to avoid unnecessary copying of data.
- Using a cRingBufferLinear in cTSBuffer and filling it in a separate thread
to avoid buffer overflows. Plugins using cTSBuffer will need to remove the
call to the now obsolete Read() function (see cDvbDevice::GetTSPacket() for
the new usage of cTSBuffer).
- cRemux::Process() has been split into Put(), Get() and Del() to allow for a
better decoupling of the remuxing and disk writing process. Plugins using
cRemux will need to be modified accordingly.
- The actual disk writing in recordings is now done in a separate thread to
improve the overall throughput.
- Changed cRemux so that it returns the maximum available amount of data with
each call, not just 2048 byte.
- Added a visual display of all cRingBufferLinear buffers for debugging. To
activate it, define DEBUGRINGBUFFERS in ringbuffer.h.
- Instead of cCondVar now using the new cCondWait (which also avoids a possible
"near miss" condition; thanks to Sascha Volkenandt for pointing out this one).
cCondVar is still present for plugins that use it (and VDR itself also still
uses it in cRemote).
- The cRingBuffer now does EnableGet()/EnablePut() only if the buffer is more than
one third full or empty, respectively. This dramatically improves recording
performance and reduces system load (thanks to Marco Schlüßler for doing some
testing regarding buffer performance and giving me some hints that finally led
to finding out that this was the basic problem causing buffer overflows).
- Improved Transfer Mode (thanks to Marco Schlüßler for suggestions and testing).
- Fixed a possible crash with inconsistent SI data (thanks to Marcel Wiesweg).
- Fixed showing the replay mode if the OSD is currently in use (thanks to Kimmo
Tykkala for pointing out this problem).
- cOsdProvider::NewOsd() now always returns a valid pointer, even if the OSD is
currently in use (it will then return a dummy cOsd object and write a message to
the log file).
- Added Estonian language texts (thanks to Arthur Konovalov).
- Fixed 'newplugin' and libsi/Makefile to use the compiler defined in $(CXX) for
generating file dependencies (thanks to Andreas Brachold).
- Moved the initialization of aPid1 and aPid2 to the beginning of cDvbDevice::cDvbDevice()
to have them set in case a patch references them (thanks to Wayne Keer for pointing
this out).
- Completed the Russian OSD texts (thanks to Vyacheslav Dikonov).
- Avoiding unnecessary section filter start/stops (thanks to Marco Schlüßler).
- Made the "Channel not available!" message and mtInfo instead of mtError (suggested
by Wayne Keer).
- Made volume control more linear (thanks to Emil Naepflein and Udo Richter).
- Now skipping code table info in SI data (suggested by Milos Kapoun).
- Added missing Czech characters to fontosd-iso8859-2.c (thanks to Milos Kapoun).
- Fixed a crash in the time search mechanism (reported by Reinhard Nissl).
- If one PID can't be added, the whole cDevice::AttachReceiver() will now fail
and all PIDs added so far will be deleted (thanks to Marco Schlüßler for
pointing out this one).
- Now only saving channels.conf after a modification made by the user (avoids
lots of disk access due to automatic channel updates). Automatic channel
modifications will be saved every 10 minutes if no recording is currently
active.
- Removed the 'Log' parameter from the cChannel::Set... functions. Instead
checking if the channel has a non-zero number.
- Updated 'channels.conf.terr' for Hannover (thanks to Sven Kreiensen).
|
|
- In order to avoid problems on NPTL systems, VDR now checks for the presence
of NPTL at program start, and if it is, exits and tells the user to do
'export LD_ASSUME_KERNEL=2.4.1' before starting VDR.
- Revisited the "Fixed missing audio after replaying a DVD" change because it
introduced a sound disturbance when switching between channels on the same
transponder (thanks to Marco Schlüßler).
- In order to avoid problems on UTF-8 systems, VDR now checks for the presence
of UTF-8 at program start, and if it is, exits and tells the user to turn off
UTF-8 before starting VDR (thanks to Ludwig Nussel for pointing out a problem
with systems that are set to use UTF-8). There are also problems in case the
video partition is mounted with "iocharset=utf8" (thanks to Jörg Knitter for
reporting this one).
Please also read the "IMPORTANT NOTES" section in the INSTALL file!
- Some changes to the SPU decoder interface (thanks to Sven Goethel).
- Some improvements in cOsd creation (thanks to some suggestions by Jouni Karvo).
- Fixed calculating the OSD width and height (thanks to Olaf Henkel for reporting
a problem with long event texts in the "Classic VDR" skin).
- Fixed switching channels while an encrypted channel is being recorded, because the
channel was switched if the new channel was on the same transponder and was
a radio channel or an unencrypted channel (thanks to Martin Dauskardt for reporting
this one).
- No longer using the external 'find' command to scan the video directory for
recordings (based on a suggestion by Mirko Dölle).
- The list of recordings is now kept statically in memory to avoid long delays
when opening the "Recordings" menu. As a side effect, external modifications to
the video directory are no longer immediately reflected in the "Recordings" menu.
If a plugin manipulates the video directory in any way, it can call the function
Recordings.TriggerUpdate() to trigger an update of the list of recordings.
If some external tool manipulates the video directory, it can touch the file
'.update' in the video directory to trigger an update of the list of recordings.
- Fixed a memory leak in theme description handling (thanks to Sascha Volkenandt).
- Added cDevice::Flush() to make sure that all data in the video card's buffers
has been processed (thanks to Reinhard Nissl). Currently this is not yet actually
implemented for FF DVB cards.
- Fixed handling the color button texts in cMenuEditStrItem (thanks to Maynard
Cedric for reporting this one).
- Fixed the description of cRingBufferLinear (thanks to Ludwig Nussel for pointing
out this one).
- Fixed cRingBufferLinear::Get() in case the buffer wraps around (thanks to Ludwig
Nussel for reporting this one).
|
|
- Fixed some default parameters in 'skincurses'.
- Fixed cBitmap::DrawPixel(), which messed with other bitmaps' palettes in case
the pixel coordinates were outside this bitmap (thanks to Sascha Volkenandt for
reporting this one).
- The cBitmap::DrawText() function now doesn't set any background pixels if the
given background color is clrTransparent. This allows drawing "transparent"
texts (suggested by Sascha Volkenandt).
- The cBitmap::SetXpm() function now ignores unused "none" color entries, which
some broken graphics tools write into XPM files (suggested by Sascha Volkenandt).
- No longer setting lnb voltage if the frontend is not DVB-S (thanks to Marco
Schlüßler).
- Fixed displaying the current channel when switching via the SVDRP command CHAN
(thanks to Jürgen Schmitz for reporting this one).
- Fixed missing audio after replaying a DVD (thanks to Marco Schlüßler).
- Added a note about the default assignment of the color keys to MANUAL.
- Added a note about NPTL ("Native Posix Thread Library") to the INSTALL file
(apparently the "fix" in version 1.3.0 didn't really fix this).
- Modified 'libsi' to require callers to state the buffer sizes when getting
strings in order to avoid buffer overflows (thanks to Philip Lawatsch for
debugging a buffer overflow in eit.c).
|
|
- Completed Croatian language texts (thanks to Drazen Dupor).
- New iso8859-2 font to fix the problem with program freezes (thanks to Drazen Dupor).
- Implemented a default cRemote::Initialize() that waits 10 seconds for a keypress
in order to prevent a "hangup" in case, e.g., the LIRC driver is not loaded (thanks
to Helmut Auer).
- Updated 'channels.conf.terr' for Hannover (thanks to Peter Waechtler).
- cBitmap::DrawBitmap() now also resets the palette if the entire bitmap area is
covered (suggested by Sascha Volkenandt).
- Fixed setting the title in the replay display of the "Classic VDR" skin in case
a shorter title is set after a longer one (thanks to Stefan Huelswitt for
reporting this one).
- Now using more separate areas in the "ST:TNG Panels" skin to allow a theme to
use more independent clrMenu* colors.
- Fixed removing the "scanning recordings..." message in case the video directory
is empty (thanks to Andreas Regel for reporting this one).
- Added SetMessage() functions to the Replay and Channel skin functions. Plugins
that implement skins will need to implement these functions. This fixes a missing
"Editing process finished" message (thanks to Oliver Endriss for reporting this
one).
- Fixed the height of the channel display in the "Classic VDR" skin.
- Fixed handling descriptor loops in 'libsi', which had sometimes caused invalid
CA ids to be added to the channel definitions (thanks to Wayne Keer for reporting
this one, and Marcel Wiesweg for fixing it).
- Fixed handling colors in cDvbSpuPalette::yuv2rgb() (thanks to Marco Schlüßler).
- Made some functions of cFont virtual to allow implementing dummy fonts for the
'curses' skin.
- The new plugin 'skincurses' re-implements the functionality that was previously
available by compiling VDR with DEBUG_OSD. Some things may not yet work as they
should, but it's a starting point.
|
|
- Fixed a memory leak in thread handling when using NPTL (thanks to Jon Burgess).
- Fixed handling Setup.RecordDolbyDigital, which was broken since version 1.1.6.
- Fixed handling text lengths for itemized EPG texts (thanks to Marcel Wiesweg).
- Fixed the help for LSTE and LSTR (was broken in 1.3.6).
- Improved iso8859-7 fonts (thanks to Dimitrios Dimitrakos).
- Added some 3-letter language codes (thanks to Marcus Mönnig).
- Added language code handling to the subtitling descriptor in 'libsi' (thanks to
Pekka Virtanen).
- Moved several menu item classes from menu.c to menuitems.[hc] to make them
available for plugins.
- The epg2html.pl script now handles '|' in description texts.
- The new setup option "OSD/Use small font" can be used to control the use of
the small font (see MANUAL for details).
- Swapped osd.[hc] and osdbase.[hc] to have the virtual OSD base class named cOsd.
Plugins may need to adjust their #include statements.
- Colors are now given as AARRGGBB instead of AABBGGRR. The values are mapped to
the driver's (wrong) sequence in dvbosd.c (this should really be fixed in the
driver, together with the endian problem).
- The new OSD setup parameters "Left" and "Top" can be used to define the top left
corner of the OSD.
- The OSD size parameters are now in pixel (as opposed to formerly characters).
When reading a 'setup.conf' file from an older version of VDR, the OSDwidth
and OSDheight values will be converted to pixel automatically.
- The OSD is now fully device independent. See the comments in VDR/osd.h and the
description in PLUGINS.html for information on how a plugin can implement an OSD
display on arbitrary hardware.
- The OSD (actually its cBitmap class) can now handle XPM files. There are several
XPM files in the VDR/symbols directory which can be used by skins (some of these
have been taken from the "elchi" patch). See VDR/skinsttng.c for examples on how
to use these.
- Due to the changes in the OSD handling the DEBUG_OSD option for a textual OSD
has been dropped. There will be a plugin that implements a skin with this
functionality later.
- The entire OSD display can now be implemented via "skins". See VDR/skins.[hc],
VDR/skinclassic.[hc], VDR/skinsttng.[hc] and PLUGINS.html for information on how
a plugin can implement its own skin. By default VDR comes with a "Classic" skin
that implements the OSD display known from previous versions, and the new skin
named "ST:TNG Panels", which is also the default skin now. The actual skin can
be selected through "Setup/OSD/Skin".
- The colors used in a skin can now be configured using "themes". See PLUGINS.html
for information on how a skin can make use of themes, and man vdr(5) for the
structure of a theme file. The actual theme to use can be selected through
"Setup/OSD/Theme".
- Added Croatian language texts (thanks to Drazen Dupor).
NOTE: there is apparently a problem with the newly introduced iso8859-2 font,
because as soon as Setup/OSD/Language is set to Croatian (currently the last one
in the list) everything freezes and the vdr processes have to be killed with -9
and the driver needs to be reloaded. Maybe somebody else can find out what's
going wrong here...
- Added missing NULL checks when accessing sectionHandler in device.c (thanks to
Pekka Virtanen).
- Fixed setting the time from the DVB data stream (thanks to Helmut Auer for
pointing out a frequency/transponder handling mixup). This now also takes the
actual source (sat, cable etc.) into account. Please go into "Setup/EPG" and
set the "Set system time" and "Use time from transponder" parameters accordingly
(this is necessary even if you have already set them before!).
|
|
- Fixed dropping out of replay mode while viewing a recording that is still
going on (thanks to Oliver Endriss for reporting and helping to debug this
one).
- Fixed handling ':' characters in channel names when reading channels.conf
(thanks to Reinhard Nissl for reporting this one).
- Fixed the URL to the 'Doxygen' tool in INSTALL (thanks to Dirk Essl).
- Removed the obsolete chapter "Stopping a recording on the primary DVB interface"
from MANUAL.
- Completed Dutch language texts (thanks to Hans Dingemans).
- Made 'diseqc.conf' a required file only if Setup.DiSEqC is activated (thanks to
Thomas Schmidt).
- VDR now starts up even if 'keymacros.conf' references a plugin that is currently
not loaded (suggested by Alexander Wetzel).
- Fixed checking for VIDEO_STREAM_S in cRemux::SetBrokenLink() (thanks to Oliver
Endriss).
- Added 'repeat' function to keys '7' and '9' ("jump to mark") in replay mode
(suggested by Oliver Endriss).
- Made cOsdMenu::Display() virtual, which allows plugins to do some additional
processing after calling the base class function (suggested by Jan Rieger).
- Updated 'ca.conf' (thanks to Marco Franceschetti).
|
|
- Using masks in EIT filtering to reduce the number of filters (thanks to Andreas
Schultz).
- Fixed handling Ca descriptors (thanks to Stefan Huelswitt).
- Now only those Ca descriptors are sent to a CAM that are actually understood
by that CAM.
- Re-enabled CAM communication during replay and on non-Ca channels. This requires
a DVB driver with firmware version 2613 or later.
- It is now possible to do simultaneous recording and replay with a single DVB
card, even with encrypted channels. This requires the use of the Link Layer
firmware, version 2613 or higher; the -icam firmware is still limited to live
encrypted channels only. Finally we have time shift for encrypted channels on
single card systems!
- Enhanced detection of pending user I/O from CAMs to avoid sluggish reaction
to remote control keypresses.
- Implemented "pause live video". You can now press "Menu/Yellow" or "Pause" on
your remote control while watching live video to start an instant recording
of the current programme and immediately start replaying that recording.
|
|
- The character '|' in description texts of EPG records is now interpreted as a
newline character (suggested by Gerhard Steiner).
- Updated 'channels.conf.cable' (thanks to Andreas Kool).
- Improved handling of repeated remote keys.
- The RCU now only sets the channel number display when there are no incoming remote
control keys, which improves reaction on repeated keys.
- The actual tuning is now done in a separate thread, which makes zapping through the
channels a lot faster and no longer gets stuck on channels that don't broadcast.
This also makes "Motor-DiSEqC" work (thanks to Reinhard Walter Buchner for his help
in testing this). Since switching channels now no longer explicitly waits for a
channel lock in the foreground thread, the "panic level" mechanism is no longer
used (maybe we don't need it any more, anyway).
- The keyboard is now by default always active to control VDR. The 'make' option
REMOTE=KBD is therefore obsolete. When compiling VDR with REMOTE=RCU or REMOTE=LIRC,
the keyboard can thus now be active together with the remote control. If you want
to build VDR _without_ keyboard support you can set NO_KBD=1 in the 'make' call.
Since the keyboard codes are now different from the ones used previously (which
were mapped by the 'ncurses' library) you will need to go through the "Learning
keys" procedure again. To do so, either delete the file /video/remote.conf or
remove the KBD.* entries from it before starting this version of VDR.
(Thanks to Thomas Sailer for pointing out how to set the terminal parameters to
read from the keyboard).
- The 'ncurses' library is now only necessary when compiling VDR with DEBUG_OSD=1.
|
|
- Added new entries to 'ca.conf'.
- Fixed closing unused PID handles (thanks to Stefan Schluenss for reporting this
one).
- Added more examples to 'diseqc.conf' (thanks to Oliver Endriss).
- Fixed disabling multiple recordings on a single DVB card (comment out the definition
of the macros DO_REC_AND_PLAY_ON_PRIMARY_DEVICE and DO_MULTIPLE_RECORDINGS in
dvbdevice.c).
- Plugins can now have their very own OSD setup in the object they return from
a call to cPlugin::MainMenuAction(). In order to implement this, the return type
of cPlugin::MainMenuAction() had to be changed from (cOsdMenu *) to (cOsdObject *).
So in case you are compiling an existing plugin with this version of VDR and you
get an error message, simply change cOsdMenu to cOsdObject in the plugin's source
for the MainMenuAction() function.
Plugin authors who have so far (ab)used the cControl mechanism to implement their
own raw OSD should take a look at the new demo plugin 'osddemo'. It implements
a very primitive game that shows how a plugin can have its own raw OSD. Especially
look into cLineGame and see how it implements the Show() function. See also
the chapter on "User interaction" in PLUGINS.html.
- Added three new fields to the lines in 'channels.conf': NID, TID and RID. NID and
TID are the Network and Transport Stream IDs, respectively. RID is an additional ID
that can be used to tell apart channels that would otherwise be indistinguishable.
This is typically the case with radio channels, which may have the same NID, TID
and SID, but different "radio IDs". This new field is therefore called RID ("radio
ID"). Currently NID and TID are not yet used by VDR and should always be 0. The
RID is actually used when building the "unique channel ID", so if you have channels
in your 'channels.conf' file that cause error messages when loading, you can set
the RIDs of these channels to different values.
When reading an old 'channels.conf' these new fields will be automatically
initialized to 0 and once the file is written back to disk they will be appended
to the channel definitions.
Thanks to Régis Bossut for pointing out that with some providers the channels can
only be distinguished through the RID.
- The "unique channel ID" now contains an optional 5th part (the RID). See man vdr(5).
- Updated 'channels.conf.cable' and made some channels unique using the new RID
(thanks to Andreas Kool for pointing out the problems).
- Made some channels unique in 'channels.conf.terr' using the new RID.
- Extended the '-l' option to allow logging to LOG_LOCALn (n=0..7) by writing, for
instance, '-l 3.7' (suggested by Jürgen Schmidt).
- Now deleting stale lock files if they have a time stamp that is outside the window
'now +/- LOCKFILESTALETIME'. This improves things in cases where the system time
makes far jumps, so that a lock file might end up with a time stamp that lies
in the distant future (thanks to Oliver Endriss).
|
|
- Fixed saving the polarization parameter of channels that have a number in the
'source' parameter (thanks to Peter Seyringer for reporting this one).
- Updated 'channels.conf.terr' (thanks to Andy Carter).
- Updated 'channels.conf.cable' (thanks to Achim Lange).
- First step towards a "unique channel ID". The channel ID is a human readable
string, made up from several parameters of the channel's definition in the file
'channels.conf' (see man vdr(5) for details).
In order for the "unique channel ID" to work, all channel definitions now must
be unique with respect to the combination of their Source, Frequency and SID
parameters. You may have to fix your 'channels.conf' manually if there are error
messages in the log file when loading it. BE SURE TO MAKE A BACKUP COPY OF YOUR
'channels.conf' AND 'timers.conf' FILE BEFORE SWITCHING TO THIS VERSION, AND CHECK
VERY CAREFULLY WHETHER YOUR TIMERS ARE STILL SET TO THE RIGHT CHANNELS!
When reading an existing 'timers.conf', the channels will be identified as before
by their numbers. As soon as this file is written back, the channel numbers will
be replaced by the channel IDs. After that it is possible to manually edit the
'channels.conf' file and rearrange the channels without breaking the timers.
Note that you can still define new timers manually by using the channel number.
VDR will correctly identify the 'channel' parameter in a timer definition and
use it as a channel number or a channel ID, respectively. Also, the SVDRP commands
that return timer definitions will list them with channel numbers in order to
stay compatible with existing applications.
The channel ID is also used in the 'epg.data' file to allow EPG information from
different sources to be stored, which would previously have been mixed up in case
they were using the same 'service ID'. Note that the contents of an existing
'epg.data' file from a previous version will be silently ignored, since it doesn't
contain the new channel IDs. When inserting EPG data into VDR via SVDRP you now also
need to use the channel IDs.
Currently the EPG data received from the DVB data stream only uses the 'Source'
and 'Service ID' part of the channel ID. This makes it work for channels with
the same service IDs on different sources (like satellites, cable or terrestrial).
However, it doesn't work yet if the service IDs are not unique within a specific
source. This will be fixed later.
- Added missing SID parameters to 'channels.conf'. Some channels have been removed
since they are apparently no longer broadcasted.
- Removed dropping EPG events from "other" streams that have a duration of 86400
seconds or more (was introduced in version 1.1.10). This has become obsolete by
the modification in version 1.1.13, which fixed fetching the current/next information
to handle cases where the duration of an event is set wrongly and would last beyond
the start time of the next event. Besides, the change in 1.1.10 broke handling EPG
data for NVOD channels.
- Fixed a compiler warning regarding cMenuChannels::Del() and MenuTimers::Del() hiding
the base class virtual functions.
|
|
- Adapted VDR to the NEWSTRUCT driver. To use the new driver, compile VDR with
'make NEWSTRUCT=1' (thanks to Holger Wächtler for some valuable advice).
By default it currently still uses the old driver.
- Added some missing #includes (thanks to Martin Hammerschmid).
- Changed the log error message "can't record MPEG1!" to "error in data stream!",
since the mentioning of MPEG1 has irritated many people.
- Consistently using malloc/free and new/delete (thanks to Andreas Schultz).
- Temporarily made cDevice::ProvidesCa() virtual (Andreas Schultz needs this
in his DXR3 plugin).
- cDevice no longer exposes a file handle to cPlayer. A derived cPlayer class
can now call DevicePoll() to see whether the replay device is ready for
further data. A derived cDevice class must implement Poll() and shall
check if any of its file handles is ready for data.
- Implemented several replay modes to allow players that play only audio (thanks
to Stefan Huelswitt).
- Improved cCondVar::Wait() and implemented cCondVar::TimedWait() (thanks to
Stefan Huelswitt).
- VDR no longer gives up if there is no DVB device. It continues to work if
there is at least one device, either a DVB device found by the core VDR code
itself, or a device implemented by a plugin.
|
|
- Added direct access to the index data of cPalette (needed for displaying SPUs,
thanks to Andreas Schultz).
- The status monitor function cStatus::Replaying() now gets a 'cControl *' argument instead
of a 'cDvbPlayerControl *' in order to allow additional players to call this function.
cPlayer and cControl have been given the functions GetIndex() and GetReplayMode() to
allow access to the player's status.
- Added cOsd::OpenRaw() to create a raw OSD (needed for displaying SPUs).
- Changed the symantics of the Name parameter in cStatus::Recording() and
cStatus::Replaying(). It is no longer the full directory name of the recording,
but rather just the basic name. This has been changed to allow players that can't
provide a name to simply use a string that describes the player type (like, e.g.,
"DVD").
- Fixed a hangup when switching to the next file during replay.
- Fixed a possible race condition in the cDvbPlayer (thanks to Andreas Schultz
for pointing out this one).
- Disabled channels on Transponder 12070 in 'channels.conf', which apparently no longer transmits.
|
|
- Added Hungarian language texts (thanks to Istvan Koenigsberger and Guido Josten).
- Activated cutting.
- Activated 'Transfer Mode'.
- Moved handling of the Menu key entirely into vdr.c.
- Switched VDR's own player to the new cPlayer/cControl structures.
- Switched handling 'Transfer Mode' to the new cPlayer/cControl structures.
- The following limitations apply to this version:
+ The '-a' option (for Dolby Digital audio) doesn't work yet.
+ Switching between different language tracks doesn't work yet.
|
|
- Improved the VDR Makefile to avoid a warning if the '.dependencies' file does
not exist, and also using $(MAKE) to call recursive makes.
- Changed the name of the 'package' target in the plugin Makefiles to 'dist'
(following the suggestions in the "GNU Make" manual). If you already have started
a plugin project, you may want to change this in your Makefile accordingly.
- Improved the plugin Makefile to avoid a warning if the '.dependencies' file does
not exist, and also using $(shell...) to get the version numbers. If you already have
started a plugin project, you may want to change this in your Makefile accordingly.
- Fixed some function headers to make them compile with gcc 3.x (thanks to
Gregoire Favre).
- Fixed the cutting mechanism to make it re-sync in case a frame is larger than the
buffer (thanks to Sven Grothklags).
- Added an error message if the directory specified in the '-L' option can't be
accessed (suggested by Stefan Huelswitt).
- Rearranged OSD class names to make 'cOsd' available for the main OSD interface.
- Completely moved OSD handling out of the cDvbApi class, into the new cOsd.
- Implemented cStatus to allow plugins to set up a status monitor.
See PLUGINS.html for details.
- Moved the cEITScanner out of dvbapi.h/.c, into the new eitscan.h/.c.
- Added Swedish language texts (thanks to Tomas Prybil).
- Fixed parsing 'E' records in epg2html.pl (thanks to Matthias Fechner for pointing
out this one).
- Removed compiler option '-m486' to make it work on non-Intel platforms. If you
have already started a plugin project, you may want to make sure you remove this
option from your existing Makefile.
- Completely rearranged the recording and replay functions to make them available
to plugins.
- Replay is now done in a single thread (no more syncing between input and output
thread necessary).
- It is now possible to record several channels on the same transponder with "budget
cards". VDR automatically attaches a recording timer to a card that already
records on the appropriate transponder. How many parallel recordings can actually
be done depends on the computer's performance. Currently any number of recordings
gets attached to a card, so you should carefully plan your timers to not exceed
the limit. On a K6-II/450 it was possible to record three channels from transponder
12480 with a single WinTV NOVA-S.
- Timers that record two successive shows on the same channel may now overlap and
will use the same DVB card. During the time where both timers record the data
is simply saved to both files.
- The following limitations apply to this version:
+ Transfer mode doesn't work yet.
+ The '-a' option (for Dolby Digital audio) doesn't work yet.
+ Switching between different language tracks doesn't work yet.
+ Cutting doesn't work yet.
|
|
- Changed the cPlugin::Start() function to return a boolean value that indicates
if the plugin will not be able to perform its task (suggested by Stefan Huelswitt).
- Added the cPlugin::Housekeeping() function (suggested by Stefan Huelswitt).
- Updated channels.conf.cable (thanks to Uwe Scheffler).
- Added 'insert' capabilities to cList (suggested by Stefan Huelswitt).
- Changed the 'package' target in the plugin's Makefile to produce a package that
expands to a directory with just the plugin name and version number (suggested
by Stefan Huelswitt).
- Made the config directory available to plugins (suggested by Stefan Huelswitt).
See PLUGINS.html, section "Configuration files" for details.
- Improved the [eid]syslog() macros, so that the LOG_... macros don't need to be
given any more.
|
|
- Begin of the 1.1 development branch. THIS IS NOT A STABLE VERSION!
The current stable version for every day use is still the 1.0 branch.
- First step towards a universal plugin interface. See the file PLUGINS.html
for a detailed description. The man page vdr(1) describes the new options '-L'
and '-P' used to load plugins. This first step implements the complete "outer"
shell for plugins. The "inner" access to VDR data structures will follow.
- The VDR version number is now displayed in the title line of the "Setup" menu.
|
|
- Added 'Ca' code 201 for 'Cryptoworks, GOD-DIGITAL' to 'ca.conf' (thanks to
Bernd Schweikert).
- Fixed avoiding the primary DVB interface in case Setup.PrimaryLimit is 0.
- Fixed handling CICAM settings if the first one of a DVB card was FTA.
- Fixed reacting on changes in CICAM settings (needed to restart VDR before).
- The "Blue" button in the "Main" menu now works as "Stop" button if a recording
is currently being replayed.
- New command line option '-m' to mute audio of the primary DVB device at
startup (suggested by Mirko Günther).
- The new SVDRP command VOLU can be used to control the audio volume (suggested
by Mirko Günther).
- Fixed resetting 'mute' state when setting the volume to a non-zero value.
- Added log messages when deleting recordings in case the disk runs full while
recording.
- Fixed closing a pipe (used for replaying Dolby Digital audio), which
sometimes left 'zombie' processes behind (thanks to Werner Fink for helping
to debug this one).
- Now starting the Dolby Digital output thread only if the recording actually
contains Dolby Digital audio data (thanks to Werner Fink).
- Implemented OSD for Volume and Mute (works only if there is no other OSD
activity, but this should be no problem for normal use).
- Changed the MANUAL description of the "Conditional Access" setup parameters
to reflect the actual "CICAM DVBn m" notation in the "Setup" menu.
- The new Setup parameter "Use time from transponder" can be used to define which
transponder shall be used to set the system time (see MANUAL for details).
If you have been using the SetSystemTime option previously, you now MUST
select a channel that you trust to have a reliable time base.
- Grouped the Setup parameters into several sub-menus, so that each group of
parameters fits on a single screen - unless the height of the OSD has been
set to a small value (based on code from Markus Lang).
- Changed the title of the "Main" menu to "VDR".
- Fixed displaying a system message while the replay mode is being shown.
- Physically removing a deleted recording if one with the same name shall be
deleted again.
- The "Left" and "Right" keys are now used to page up and down in text displays
(like the EPG descriptions or the results of commands executed from the
"Commands" menu).
- Fixed high CPU usage in transfer mode.
- Replaced 'killproc' with 'killall' in 'runvdr', since apparently 'killproc'
is not available by default on some Linux distributions, whereas 'killall' is.
Please check if your system provides 'killall' - if it doesn't, please change
this back in 'runvdr' and report this (thanks to Achim Lange).
- The "Commands" menu now automatically assigns number keys as hotkeys to the
commands. If you have preceeded your commands with digits you may want to
remove these from your 'commands.conf' file.
- The new Setup item "Restart" can be used to force a complete restart of VDR,
including reloading the driver. Note that this can only work if VDR and the
driver are wrapped into a mechanism that actually performs this action if VDR
exits. The 'runvdr' script can be used for this purpose.
- Refined texts of the "Setup" menu.
|
|
- Added scanning for EPG data for another 4 days on channels that support this
(thanks to Oleg Assovski).
- Removed '#define VFAT 1' from recording.c (was a leftover from testing).
- Fixed the "Low disk space!" message (thanks to Sergei Haller).
- Added the TPID to Hessen-3 in 'channels.conf' (thanks to Sergei Haller).
- Fixed a crash when replaying with DEBUG_OSD=1 (thanks to Stefan Huelswitt).
- Implemented the "First day" parameter for repeating timers. See FORMATS for
information about the enhanced 'timers.conf' file format, and MANUAL for
a description of the new item in the "Edit Timer" menu and the enhanced
functionality of the "Blue" button in the "Timers" menu.
- When deleting a recording that is currently still being recorded, the related
timer will now automatically be terminated. If this is a repeating timer, it
will receive a "First day" setting that skips the timer for this day.
- Fixed closing all unused file descriptors when opening a pipe (thanks to
Werner Fink).
- Instant recordings now take the EPG data from the point in time at 5 minutes
from the start time of the recording. In order for this to work the 'active'
parameter of a timer now uses the second bit to indicate that this is an
"instant" recording (see FORMATS for details).
- Fixed the SVDRP GRAB command in case the video device can't be opened (thanks
to Adrian Stabiszewski).
- At startup the data written into 'epg.data' is now read into the EPG data
structures. In order for this to work, the 'E' record has been extended to
(optionally) contain the 'table ID' (see FORMATS for details).
- The new SVDRP command PUTE can be used to put EPG data into the EPG list.
See FORMATS for details about the required data format.
- Taking the German umlauts 'as is' when compiled with VFAT.
- The new Setup parameter RecordDolbyDigital can be used to generally turn off
recording the Dolby Digital audio channels in case you want to save disk space
or don't have the equipment to replay Dolby Digital audio.
- Reading the 'setup.conf' file no longer terminates in case of an error, but
rather attempts to read the rest of the file.
- Removed DVD support from the core VDR source, since the current version from
Andreas Schultz is already much further developed (DVD menu navigation) and
the concept of "additional players" in VDR is going to change in version 1.1.0,
where a new "plugin" interface shall allow the easy implementation of new
players without having to patch the core VDR source. Until then, Andreas has
agreed to provide his DVD support as a completely external patch.
- The contents of the distribution archive now contains the directory name with
the current version number, as in 'vdr-1.0.0pre1/...' in order to avoid
inadvertently overwriting an existing VDR directory with a new version.
- Added a missing error message in SVDRP command LSTC in case the given channel
can't be found.
|
|
- Fixed setting the OSD size in the 'Confirm' interface call (thanks to
Deti Fliegl).
- Removed the 'read incomplete section...' error message in the EIT processor.
- Fixed channel data for "DW TV" (thanks to Axel Gruber).
- Added DPID to "PREMIERE MOVIE 1" in channels.conf.cable (thanks to Stephan
Schreiber).
- Prepared the OSD functions for multiple overlapping windows.
- Removed the check to see whether the system time is running linearly.
- Improved performance of SVDRP command entry.
- Removed EPGBugfixLevel '3' - after more than a year Pro-7 finally managed to
broadcast the correct timestamps for EPG events between 0:00 and 6:00!
- Fixed failing watchdog timer if program hangs in OSD activities (thanks to
Carsten Koch).
- No longer requiring 'libncurses' if compiling without DEBUG_OSD=1 and
REMOTE=KBD (thanks to Lauri Pesonen).
- The "Recordings" menu now displays a hierarchical structure if there are
subdirectories for the recordings. This can be controlled through the
"RecordingDirs" parameter in the "Setup" menu.
See "MANUAL/Replaying a Recording" for details.
- Improved speed of setting the Help button texts.
- Fixed handling file names that contain single quotes (') or dollar signs ($)
in the call to the shutdown command (option '-s') and the recording command
(option '-r').
- Improved error handling in the editing process; the resulting file will be
deleted if an error occured.
- A message is now prompted at the end of the editing process, indicating
whether the process succeeded or failed.
- Fixed setting the LastActivity timestamp after a shutdown prompt (thanks to
Sergei Haller).
- A message is now prompted if free disk space becomes low during recording.
- The editing process now calls AssertFreeDiskSpace() to remove deleted
recordings if the disk becomes full.
- The "Main" menu now displays in its title the used disk space (in percent)
and the estimated free disk space (in hh:mm), assuming a data rate of 30 MB
per minute.
- Activating the "Recordings" menu now displays "scanning recordings..." to
give the user some feedback in case this takes longer.
- Status messages are now displayed centered.
- Removed the 'Tools' subdirectory from the VDR archive. All contributed tools
can now be found at ftp://ftp.cadsoft.de/pub/people/kls/vdr/Tools.
|
|
- The menus and the channel display now show the current date and time.
- The new Setup parameter MaxVideoFileSize can be used to customize the
maximum size of the recorded video files.
- Fixed a bug in handling repeating timers that record over midnight (the
calculation of matching timers has been completely rewritten).
- Timers that are currently recording are now marked with '#' in the "Timers"
menu.
- Timers are now sorted in the "Timers" menu, showing the sequence in which
they will be recording. This can be disabled in the "Setup" menu. Note
that the "Mark" button doesn't work if timers are displayed sorted.
|
|
- Modified the display of the channel group separators (thanks to Markus Lang
for this suggestion).
- Added support for replaying DVDs (thanks to Andreas Schultz). See INSTALL for
instructions on how to compile VDR with DVD support.
- Fixed replay progress display in case replay is paused while watching an
ongoing recording.
- Ringbuffer uses semaphores to signal empty/full conditions.
- Fixed calculating the timeout value in cFile::FileReady() (thanks to
Wolfgang Henselmann-Weiss).
|
|
- Added Norwegian language texts (thanks to Jørgen Tvedt).
- Increased the usleep value in cDvbOsd::Cmd() to 5000 in order to work on
systems with the KURT/utime-patch (thanks to Guido Fiala).
- Changed the check whether the driver is loaded in runvdr to check for the
'dvb' module (the last one loaded).
- Fixed repeat function with LIRC (thanks to Stefan Huelswitt).
- Increased the upper limit for the symbol rate to 30000 (thanks to Ulrich
Röder).
- Made the position of the channel display configurable (thanks to Stefan
Huelswitt).
- Made the width and height of the OSD configurable (thanks to Stefan Huelswitt).
- DiSEqC support can now be generally enabled/disabled in the Setup menu. This
may be necessary if your multiswitch gets irritated by the default DiSEqC
codes '0' (thanks to Markus Lang).
- Fixed replaying in case there is no index file.
- Fixed jumping to an editing mark when replay has been paused.
- Avoiding unnecessary code execution in the replay progress display (thanks
to Guido Fiala).
- When entering time values the digits that still have to be entered are now
shown as '-' (as in "1-:--").
- When setting an editing mark while the progress display is not active, the
display will now be turned on for a short while to indicate the successful
setting of the mark.
- Updated 'channels.conf' for Premiere World (thanks to Helmut Schächner).
Check your timers if you use this channels.conf file, since the sequence of
several PW channels has been changed.
- Changed the color of "Info" messages to "black on green" and that of the
confirmation messages (like "Delete...") to "black on yellow".
- Fixed display with DEBUG_OSD (it still crashes sometimes, esp. when replaying,
but I can't seem to find what causes this... any ideas anybody?).
- Avoiding audio/video distortions in 'Transfer Mode' by no longer actually
tuning the primary interface (which can't receive this channel, anyway).
Apparently the driver gets irritated when the channel is switched and a
replay session is started immediately after that.
- Increased timeout until reporting "video data stream broken" when recording.
- Explicitly switching back to the previously active channel after ending a
replay session (to have it shown correctly in case it was in 'Transfer Mode').
|
|
- Fixed 'Transfer Mode' in cases where a non-primary interface was switched to
a channel that only the primary interface can receive (which could happen in
the EPG scanner).
- The EPG scanner now starts with the first channel (it used to start with the
second channel).
- Reacitvated setting the PNR.
- Adapted the frame scanning to the new muxing of the driver.
- The new compile time option REMOTE=NONE can be used to compile VDR without
any remote control support (for applications where it shall be controlled
exclusively via SVDRP).
- The new command line option -D can be used to define which DVB interfaces
a certain instance of VDR shall use.
- The "Left" and "Right" keys are now used to page up and down in lists (thanks
to Martin Hammerschmid). Since the "Timers" menu already uses these keys to
(de)activate timers, this functionality is not available there.
- The "Main" and "Commands" menu now support "hotkeys", which means that if the
first non-blank character of a menu item is a digit in the range 1..9, that
item can be selected by pressing the respective numeric key on the remote
control.
- The channel data in 'channels.conf' now contains the teletext PID (thanks to
Dave Chapman). Existing files will be read normally (and the teletext PID set
to 0), but once they are written back (due to some channel editing) the file
will have the new format.
- The EPG scanner now scans each transponder only once per cycle.
- Deleted recordings are now automatically removed from disk after a while (not
only when disk space is being needed for a new recording).
- Fixed repeat function in LIRC remote control.
- Changed the MAXDVBAPI macro in dvbapi.c to 4 in order to directly support the
maximum possible number of DVB cards.
- The 'Ca' parameter in the default 'channels.conf' has been changed from '2'
to '3' because the VDR prototype now has 3 DVB cards (and currently the CAM
module only works if it is inserted into the last DVB card).
- The "Now", "Next" and "Schedule" menus now remember the current channel and
restore the list when switching between them.
- The "Green" button in the "Recordings" menu can now be used to rewind a
recording and play it from the very beginning.
- Fixed handling ':' in timer filenames and '\n' in timer summaries (see FORMATS).
- When removing recordings empty directories are now removed from the video
directory.
- Added the "schnitt" tools from Matthias Schniedermeyer.
- New SVDRP command MESG to display a short message on the OSD.
- The Perl script 'svdrpsend.pl' can be used to send SVDRP commands to VDR.
- SVDRP can now immediately reuse the same port if VDR is restarted.
- SVDRP now has a timeout after which the connection is automatically closed
(default is 300 seconds, can be changed in "Setup").
- The compile time switch VFAT can be used to make VDR avoid the ':' character
in file names (VFAT can't handle them). Do 'make VFAT=1' to enable this.
- Support for DVB-C (thanks to Hans-Peter Raschke and Peter Hofmann).
See the INSTALL file for more information about the use of VDR with cable.
- Fixed an occasional segfault in the EIT processor.
- A value of '0' for the EPGScanTimeout setup parameter now completely turns off
scanning for EPG data on both single and multiple card systems.
- New setup parameter "PrimaryLimit" that allows to prevent timers from using the
primary DVB interface in multi card systems. Default value is 0, which means
that every timer may use the primary interface.
- The 'active' field of a timer will now be explicitly set to '1' if the user
modifies an active timer (see FORMATS for details).
- The new command line option -w can be used to activate a watchdog that makes
VDR exit in case the main program loop does not respond for more than the
given number of seconds. This is mainly useful in combination with the new
'runvdr' script that restarts VDR in case is has exited.
|
|
- VDR now requires driver version 0.8.1 or higher.
- Recordings are now saved in PES mode. Note that you now need to install the
driver *WITHOUT* 'outstream=0'! This is the default when you 'make insmod' in
the DVB/driver directory.
Old recordings (in AV_PES mode) can still be replayed (as long as the driver
still supports replaying AV_PES files). The only limitation with this is that
in fast forward/back mode the picture may be slightly distorted and there may
be sound fragments.
- The EPG data is now dumped into the file /video/epg.data every ten minutes.
Use the Perl script 'epg2html.pl' to convert the raw EPG data into a simple
HTML programme listing.
- Fixed handling of channel switching with the "Blue" button in the "What's on
now/next?" menus.
- Fixed saving the MarginStop setup parameter.
- Fixed missing initialization in cConfig.
- Implemented "On Disk Editing".
- There is no more default 'timers.conf' file.
- Added Italian language texts (thanks to Alberto Carraro).
- Fixed starting a replay session when the program is currently in "transfer
mode".
- Fixed setting/modifying timers via SVDRP with empty summary fields.
- Fixed a problem with recordings that have a single quote character in their
name (this is now mapped to 0x01).
- Changed the value for Diseqc to '0' in the default 'channels.conf'.
- Fixed displaying channels and recording status in the RCU's LED display when
a recording is interrupted due to higher priority.
- Implemented safe writing of config files (first writes into a temporary file
and then renames it).
- In case the video data stream is broken the log message will come only every
5 seconds.
- The current channel is now saved in the 'setup.conf' file when VDR is cancelled,
and will be restored next time it is started (thanks to Deti Fliegl).
- The EIT scanning thread is now locked when switching channels to avoid problems.
- Encrypted channels can now be selected even without knowing the PNR (however, it
is still necessary for the EPG info).
|
|
- Date and time in the title of an event info page are now always right adjusted.
- The 'current channel' is now handled device specific (in case there is more
than one DVB card).
- The 'SetSystemTime' option in the "Setup" menu is now shown as "yes/no".
- Implemented "internationalization" (see 'i18n.c' for information on how to
add new languages). Thanks to Miha Setina for translating the OSD texts to
the Slovenian language.
- Fixed learning keys on the PC keyboard (display oscillated).
- Fixed a timing problem with OSD refresh and SVDRP.
- Avoiding multiple definitions of the same timer in the "Schedule" menu (this
could happen when pressing the "Red" button while editing the timer).
- There can now be a configuration file named 'commands.conf' that defines
commands that can be executed through the "Main" menu's "Commands" option
(see FORMATS for details on how to define these commands).
- Added a 'fixed' font for use with the output of system commands.
- The 'Priority' parameter of the timers is now also used to interrupt a low
priority timer recording if a higher priority timer wants to record.
- A timer recording on a DVB card with a CAM module will now be interrupted
by a timer that needs to use this specific DVB card to record an encrypted
channel, if the timer currently occupying this DVB card doesn't need the
CAM module (and thus can continue recording on a different DVB card).
- The "Yellow" button in the "What's on now/next?" menus now displays the
schedule of the current channel from that menu.
- All DVB cards in a multi-card system now write their EIT information into the
same data structure.
- If there is more than one DVB card in the system, the non-primary cards are
now used to periodically scan through the channels in order to keep the
EPG info up-to-date. Scanning kicks in after 60 seconds of user inactivity
(timeout in order to keep user interactions instantaneously) and each channel
that has the 'pnr' parameter defined in 'channels.conf' is switched to for
20 seconds. If there is only one DVB card in the system, that card will start
scanning after 5 hours (configurable through the "Setup" menu) of user inactivity
and will switch back to the channel it originally displayed at the first sign of
user activity. Any scanning will only occur if that particular card is not
currently recording or replaying.
- Now shifting the 'Subtitle' info into the 'ExtendedDescription' on stations
that don't send the EIT information correctly (like, e.g., 'VOX').
- Implemented a 10 seconds latency when removing files.
- Fixed unwanted reaction on the "Green" and "Yellow" button in the "Event" display.
- Implemented 'Transfer Mode' to display video data from the DVB card that actually
can receive a certain channel on the primary interface. This is currently in
an early state and may still cause some problems, but it appears to work nice
already.
|
|
- The EIT information is now gathered in a separate thread.
- The sytem time can now be synchronized to the time broadcast in the DVB data
stream. This can be enabled in the "Setup" menu by setting "SetSystemTime" to
1. Note that this works only if VDR is running under a user id that has
permisson to set the system time.
- The new item "Schedule" in the "Main" menu opens VDR's EPG (thanks to Robert
Schneider). See the MANUAL file for a detailed description.
- The new setup parameters MarginStart and MarginStop define how long (in
minutes) before the official start time of a broadcast VDR shall begin
recording, and how long after the official end time it shall stop recording.
These are used when a recording is programmed from the "Schedules" menu.
- The delay value in the dvb.c.071.diff patch to the driver has been increased
to '3', because on some systems the OSD was not displayed correctly. If you
are running an already patched version 0.71 driver and encounter problems
with the OSD, please make sure the parameter in the ddelay call is '3', not
'2'.
- Fixed initializing the RCU remote control code (didn't work after switching
on the system).
- Problematic characters in recording names (which can come from timers that
are programmed via the "Schedules" menu) are now replaced by suitable
substitutes.
|
|
- The new "Setup" menu allows the user to configure several parameters to his/her
personal taste (see MANUAL for details).
- Workaround for a driver timing problem in cDvbApi::Cmd(), which sometimes caused
the OSD to no longer be displayed (thanks to Niels de Carpentier).
- Added the '-m486' option to the compiler call.
- If a channel name contains a colon (':') it is now replaced with a '|' in
channels.conf.
- Not everybody appears to like the "page scrolling" mechanism introduced by
Heino Goldenstein in version 0.61, so this is now configurable via the "Setup"
menu.
- The new 'dvbrc2vdr' tool (thanks to Plamen Ganev!) can be used to convert
'dvbrc' channel files into 'vdr' format.
- Channels can now be "grouped" (thanks to Plamen Ganev!). See MANUAL for details.
There is currently no mechanism to define and maintain "Channel groups" via
the menu, so you'll have to insert "Channel group" control lines into your
'channels.conf' file manually (for example with a text editor).
- Started a new file named FORMATS with a description of the various file
formats used by VDR.
- The "Primary DVB interface" can now be chosen via the "Setup" menu.
- Display of the "current/next" information when switching channels can now
be disabled via the "Setup" menu.
- The "current/next" display now only shows those lines that actually contain
information.
- When directly selecting a channel by entering the channel number, the digits
entered so far together with the name of that channel are displayed on the
OSD (suggested by Martin Hammerschmid).
|
|
- Support for more than one DVB card.
- Simultaneous record and replay (with two DVB cards).
- Instant recordings no longer get the name "instant". They now get the name
of the channel, with a prepended '@' character.
- Timers that are not given an explicit Name now use the channel name with
a prepended '@' character.
- If an instant recording is currently active, the Main menu now contains
an option to stop that recording.
- Timers are now only processed when the Menu is not active. So after editing
a timer the effect will take place only after the menu has been closed.
In order to avoid missing a timer event by inadvertently leaving the menu
open, the menu will be closed automatically after about two minutes of
inactivity.
- If a recording is currently being replayed, the Main menu now contains an
option to stop replaying.
- Displaying the recording DVB interface status in the decimal points of the
RCU display.
- Reduced the number of remote control keys. Modified the key assignments for
the PC keyboard to better resemble the "up-down-left-right-ok" layout on
menu controlling remote control units.
|
|
- Changed name from 'osm' to 'vdr' to avoid mixups with the 'oms' program that
appears to be in use with DVD replay.
- Implemented a channel display in the top menu line.
- Implemented replay progress display (press "Ok" when replaying to bring it up).
- Implemented direct channel selecting by pressing the numeric keys.
- Added several 'const' keywords to please stricter compilers.
- The repeat function for the remote control no longer adapts dynamically
to the timing of the RCU (this sometimes caused the repeat function to
kick in too early).
- Channel selection is now blocked when recording or replaying.
- Improved process handling.
|
|
- Fixed compilation with only DEBUG_REMOTE=1.
- Menus now use colors.
- Support for "Red", "Green", "Yellow", "Blue" buttons.
- Channels and Timers can now be added, deleted and moved.
- Basic record/play file handling support (no actual record/playback yet).
|
|
|
