| Age | Commit message (Collapse) | Author |
|---|
|
- Removed the '#define FE_CAN_2ND_GEN_MODULATION', since it was wrong and the
flag is now in the driver, anyway.
- The full-featured DVB cards are now given the TS data directly for replay
(thanks to Oliver Endriss for enhancing the av7110 driver to make it replay
TS data). The patch from ftp://ftp.cadsoft.de/vdr/Developer/av7110_ts_replay__1.diff
implements this change in the driver.
The patch av7110_v4ldvb_api5_audiobuf_test_1.diff mentioned in version 1.7.2
is still necessary to avoid audio and video glitches on some channels.
- Added a typecast in cUnbufferedFile::Write() to avoid an error message when
compiling on 64 bit systems.
- Added some missing 'const' statements to cBitmap (thanks to Andreas Regel).
- Fixed returning complete PES packets in cTsToPes::GetPes() (thanks to Reinhard
Nissl).
- Added a missing Detach() in cTransfer::Activate() (thanks to Marco Schlüßler).
- Added clearing the TS buffers in cDevice::Detach() (thanks to Marco Schlüßler).
- Fixed incrementing the continuity counter in cPatPmtGenerator::GetPmt() (thanks
to Johann Friedrichs).
- Fixed removing deleted recordings in case there is a problem. Once a recording
caused a problem with removing, no others were removed any more and an ongoing
recording could fill up the disk and cause other recordings to be deleted
automatically (reported by Reinhard Nissl).
- Added "DEFINES += -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE"
to Make.config.template (thanks to Johann Friedrichs for pointing this out).
Plugin authors should add this line to their Makefile or Make.config if they use
file access functions that need special versions for 64 bit offsets.
- The new command line option -i can be used to set an "instance id", which will
be used to distinguish recordings of the same broadcast made by different instances
of VDR (suggested by Frank Schmirler). This replaces the use of the "resume id"
that was introduced in version 1.7.3.
- Added checking mutexCurrentAudioTrack to cDevice::PlayTs() (thanks to Reinhard
Nissl for pointing this out).
- Fixed handling the pointer field in cPatPmtParser::ParsePmt() (thanks to Frank
Schmirler - sorry I swapped two lines when adopting the original patch).
- Checking the remaining packet length after processing the pointer field in
cPatPmtParser::ParsePat() and cPatPmtParser::ParsePmt() (suggested by Frank
Schmirler).
- Checking the pointer field in cPatPmtParser::ParsePmt() only in 'payload start'
packets (suggested by Frank Schmirler).
- Changed cPatPmtGenerator to make sure the PMT pid doesn't collide with any of
the actual pids of the channel.
- Fixed cDevice::PlayTsAudio() and made cDevice::PlayTsVideo() return 0 if
PlayVideo() didn't play anything.
- Added an 'int' typecast to calculations involving FramesPerSecond() to avoid
compiler warnings (reported by Winfried Koehler).
- Fixed detecting frames for pure audio recordings.
- Fixed editing PES recordings. The frame type in the index.vdr file generated for
the edited PES recording is set to 1 for I-frames and 2 for all others (P- and
B-frames). The exact frame type doesn't matter for VDR, it only needs to know if
it's an I-frame or not.
- The PAT/PMT is now only processed if its version changes (reported by Reinhard
Nissl).
- Fixed handling the maximum video file size (reported by Udo Richter).
- Improved fast-forward/-rewind for audio recordings. The actual data is now sent
to the output device, so that it can be replayed and thus cause the proper delay.
For pure audio recordings the audio is no longer muted in fast-forward/-rewind
mode, so that some orientation regarding the position within the recording is
possible. There may still be some offset in the replay position displayed by the
progress indicator when switching from fast-forward/-rewind to play mode, as well
as in the current position during normal play mode. This is due to the various
buffers between the player and the output device and will be addressed later.
Note the new function cDevice::IsPlayingVideo(), which is used to inform the
player whether there is video data in the currently replayed stream. If a derived
cDevice class reimplements PlayTs() or PlayPes(), it also needs to make sure this
new function works as expected.
|
|
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
- Fixed handling the 'pointer field' in generating and parsing PAT/PMT (thanks to
Frank Schmirler).
- Fixed handling modulation types for DVB-S transponders when processing the NIT.
- Changed cDvbDevice::GrabImage() to use V4L2 (thanks to Marco Schlüßler).
- Added a poll to cDvbDevice::PlayVideo() and cDvbDevice::PlayAudio() to avoid
excessive CPU load (this is just a makeshift solution until the FF DVB cards
can play TS directly).
- The recording format is now Transport Stream. Existing recordings in PES format
can still be replayed and edited, but new recordings are done in TS.
All code for recording in PES has been removed.
The following changes were made to switch to TS recording format:
+ The index file format has been changed to support file sizes of up to 1TB
(previously 2GB), and up to 65535 separate files per recording (previously
255).
+ The recording file names are now of the form 00001.ts (previously 001.vdr).
+ The frame rate is now detected by looking at two subsequent PTS values.
The "frame duration" (in multiples of 1/90000) is stored in the info.vdr
file using the new tag F (thanks to Artur Skawina for helping to get the
IndexToHMSF() calculation right).
+ Several functions now have an additional parameter FramesPerSecond.
+ Several functions now have an additional parameter IsPesRecording.
+ The functionality of cFileWriter was moved into cRecorder, and cRemux is
now obsolete. This also avoids one level of data copying while recording.
+ cRemux, cRingBufferLinearPes, cTS2PES and all c*Repacker classes have been
removed.
+ A PAT/PMT is inserted before every independent frame, so that no extra
measures need to be taken when editing a recording.
+ The directory name for a recording has been changed from
YYYY-MM-DD-hh[.:]mm.pr.lt.rec (pr=priority, lt=lifetime) to
YYYY-MM-DD-hh.mm.ch-ri.rec (ch=channel, ri=resumeId).
Priority and Lifetime are now stored in the info.vdr file with the new
tags P and L (if no such file exists, the maximum values are assumed by
default, which avoids inadvertently deleting a recording if disk space
is low). No longer storing Priority and Lifetime in the directory name
avoids starting a new recording if one of these is changed in the timer
and the recording is re-started for some reason.
Instead of Priority and Lifetime, the directory name now contains the
channel number from which the recording was made, and the "resume id" of
this instance of VDR. This avoids problems if several VDR instances record
the same show on different channels, or even on the same channel.
The '-' between channel number and resumeId prevents older versions of
VDR from "seeing" these recordings, which makes sure they won't even try
to replay them, or remove them in case the disk runs full.
+ The semantics of PlayTs*() have been changed. These functions are now
required to return the given Length (which is TS_SIZE) if they have
processed the TS packet.
+ The files "index", "info", "marks" and "resume" within a TS recording
directory are now created without the ".vdr" extension.
+ The "resume" file is no longer a binary file, but contains tagged lines
to be able to store additional information, like the selected audio or
subtitle track.
+ cDevice::StillPicture() will now be called with either TS or PES data.
+ cDvbPlayer::Goto() no longer appends a "sequence end code" to the data.
If the output device needs this, it has to take care of it by itself.
- Fixed cPatPmtParser::ParsePmt() to reset vpid and vtype when switching from
a video to an audio channel (thanks to Reinhard Nissl).
- cDvbDevice now uses the FE_CAN_2G_MODULATION flag to determine whether a device
can handle DVB-S2. The #define is still there to allow people with older drivers
who don't need DVB-S2 to use this version without pathcing.
|
|
- Re-implemented handling of DVB-S2, which first appeared in version 1.5.14, but was
revoked in version 1.5.15 in favor of making a stable version 1.6.0. VDR now
requires the "multiproto" DVB driver, e.g. from http://jusst.de/hg/multiproto.
Note that the channels.conf file now supports additional parameters, so you may
want to make sure you have a backup of this file in case you need to go back to
the previous version of VDR!
- Fixed displaying transponder data when it is modified (thanks to Reinhard Nissl).
- Fixed handling the counter in detection of pre 1.3.19 PS data (thanks to Reinhard
Nissl).
- Improved logging system time changes to avoid problems on slow systems under
heavy load (suggested by Helmut Auer).
- Now setting the thread name, so that it can be seen in 'top -H' (thanks to Rolf
Ahrenberg).
- Fixed initializing the timer's flags in the cTimer copy constructor (thanks to
Andreas Mair).
- Fixed setting the OSD level in the 'osddemo' example (thanks to Wolfgang Rohdewald).
- Increased the time between checking the CAM status to 500ms to avoid problems
with some CAMs (reported by Arthur Konovalov).
|
|
- Added cDevice::HasCi() so that devices with Common Interface can be avoided
when tuning to an FTA channel, thus preserving the CAM resources even on budget
DVB cards (suggested by Petri Helin).
- Fixed i18n characters for the Hungarian texts (thanks to Thomas Günther).
- Now using cPipe instead of popen() in cCommand::Execute() to avoid problems
with open file handles when starting background commands (thanks to Reinhard
Nissl).
- Removed 'assert(0)' from cDvbSpuDecoder::setTime() (thanks to Marco Schlüßler).
- Fixed a possible crash when loading an invalid XPM file (thanks to Martin Wache).
- Updated satellite names in 'sources.conf' (thanks to Thilo Wunderlich).
- Adapted 'libsi' to DVB-S2 (thanks to Marco Schlüßler).
- Fixed handling error status in cDvbTuner::GetFrontendStatus() (thanks to
Reinhard Nissl).
- Shutdown handling has been rewritten (thanks to Udo Richter).
- Plugins can now implement the new function WakeupTime() to request VDR to wake
up at a particular time (thanks to Udo Richter).
- The HUP signal now forces a restart of VDR (thanks to Udo Richter).
- cThread::EmergencyExit() has been replaced by ShutdownHandler.RequestEmergencyExit().
- Several references to "button" in a remote control context have been changed
to "key" (based on a report from Marko Mäkelä regarding the "Menu button closes"
text). The "MenuButtonCloses" parameter in 'setup.conf' has therefore been
renamed to "MenuKeyCloses", accordingly. This will result in an "unknown config
parameter: MenuButtonCloses" error message in the log file, so you may want to
remove that entry from your 'setup.conf' file.
- Simplified the error handling in cDvbTuner::GetFrontendStatus() (based on a
discussion with Reinhard Nissl).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Increased the maximum number of DVB devices to 8 (thanks to Rolf Ahrenberg).
- The new Setup parameter "Channel entry timeout" can be used to customize the time
since the last keypress until a numerically entered channel number is considered
complete, and the channel is switched (suggested by Helmut Auer). Setting this
parameter to 0 turns off the automatic channel switching, and the user will
have to confirm the entry by pressing the "Ok" key.
|
|
- The CAM handling has been refactored. Instead of a cCiHandler per device there
is now an abstract cCiAdapter and a cCamSlot. This allows each slot to be
accessed individually.
- The general 15 seconds workaround time before opening the CAM menu has been
removed. If the CAM menu doesn't open within a timeout, the enter menu command
is now sent again.
- If a CAM is reset or pulled and reinserted, it now automatically starts
decrypting the current channel again.
- The Setup/CAM menu now dynamically refreshes its items and displays whether
a CAM is present or ready. The 'Reset' function no longer leaves the menu.
- The CAM menu will now be openend when pressing the Ok key on a slot entry.
- The CAM menu now stays within the current menu context and doesn't close and
reopen the menu every time an option is selected.
- When an encrypted channel is switched to for the first time, VDR now checks
explicitly whether a CAM can actually decrypt that channel. If there is more
than one CAM in the system that claims to be able to decrypt the channel,
they are all tried in turn.
To make this possible, an encrypted channel needs to be received in Transfer
Mode when it is switched to for the first time, so that VDR can determine
whether the TS packets are actually decrypted. Once a channel is known to
be decrypted by a particular CAM, the next time it is switched to it will
be shown in normal live viewing mode.
- A cDevice now automatically detaches all cReceiver objects that receive PIDs
that can't be decrypted with the current CAM. A plugin that attaches a cReceiver
to a device should therefore watch the receiver's IsAttached() function to
see if it is still attached to the device.
- The cReceiver constructor no longer takes an 'int Ca' as its first parameter,
but rather a 'tChannelID ChannelID'. This is necessary for the device to be
able to determine which CAM a particular channel can be decrypted with. If the
channel is known to be unencrypted, or a plugin doesn't want to provide the
channel id for other reasons, an invalid tChannelID() can be given.
- The cThread::Start() function now waits until a previous incarnation of this
thread has actually stopped. Before this it could happen that a thread's
Cancel(-1) function was called and immediately after that it was started again,
but the Start() function still found it to be 'active'.
- The parameter NeedsDetachReceivers in cDevice::GetDevice(const cChannel *Channel, ...)
has been removed. A call to this function will automatically detach all receivers
from the device if it returns a non-NULL pointer.
- The cTimeMs class now accepts an initial timeout value in its constructor.
- A CAM is now explicitly instructed to stop decrypting when switching away from
an encrypted channel.
- If the CAM in use can decrypt several channels at the same time, VDR can
now make use if this capability. Whether or not a CAM can decrypt more
than one channel is determined by sending it an initial empty QUERY command
and testing whether it replies to it.
- Ca values in the range 0...F in channels.conf can still be used to assign a channel
to a particular device, but this will no longer work with encrypted channels because
without valid CA ids VDR can't decide which CAM slot to use. However, since VDR now
automatically determines which CAM can decrypt which channel, setting fixed
channel/device relations should no longer be necessary.
IF AN ENCRYPTED CHANNEL CAN'T BE DECRYPTED AND YOU HAVE A CA VALUE IN THE RANGE
0...F FOR THAT CHANNEL, SET IT TO 0 (FTA) AND TUNE TO THE CHANNEL AGAIN.
|
|
- Fixed handling second audio and Dolby Digital PIDs for encrypted channels
(was broken in version 1.3.37).
- Improved TS/PES conversion to better handle lost TS packets (thanks to
Reinhard Nissl).
- Limited the frequency of log messages from the cRepackers.
- Now using the gettid() syscall to get a thread's pid, so that we get a
useful value on NPTL systems (suggested by Johannes Stezenbach).
- Fixed the RCU remote control handling to avoid problems with NPTL (thanks
to Andreas Share for reporting a lockup with the RCU on NPTL systems).
- When displaying the amount of free disk space, the space consumed by
recordings that have been "deleted" but not yet actually "removed" is now
taken into account (suggested by Christian Vogt).
- Now avoiding unnecessary disk access when checking if there are deleted
recordings that need to be removed (reported by Carsten Koch).
- Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now
a deleted recording is retained at least DELETEDLIFETIME seconds before
actually removing it.
The value of DELETEDLIFETIME has been changed to 300. So after (possibly
inadvertently) deleting a recording, there will be at least 5 minutes
in which it can be recovered (unless a new recording immediately requires
the disk space). The count starts again at 0 every time VDR is started.
- Fixed a possible crash when displaying the "Low disk space!" message from
a background thread (thanks to Christof Steininger).
- Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler).
- Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground
and background threads won't interfere.
- The main menu now dynamically updates its contents in case an instant
recording or replay stops, etc.
- The version number of EPG events is now also stored in the epg.data file
(thanks to Kendy Kutzner).
- EPG events that are no longer in the currently broadcasted data stream are
now automatically deleted.
- Removed an invalid access to Event->schedule in cSchedule::DelEvent().
- Modified cSchedule::Cleanup() (events are always sorted by time).
- Schedules are now cleaned up once every hour (not only at 05:00).
- The "Schedule" and "What's on now/next?" menus are now updated if a timer
is set or modified.
- cTimer no longer has its own 'schedule' member, it rather uses that of the
event it has been set to.
- The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus
now immediately creates a timer for the selected event and marks it with 'T'.
If the event is already marked with 'T', the "Red" button opens the "Edit
timer" menu for that timer.
- Removing deleted recordings is now done in a separate thread.
- Dropped the unused "stop recording on primary interface" stuff.
- Converting a grabbed image to JPEG is now done with the new function
RgbToJpeg() (see tools.h).
- The SVDRP command GRAB now determines the image type (JPEG or PNM) from the
extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit
'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but
has no meaning any more.
- The function cDevice::GrabImage() no longer writes the grabbed image to a
file, but rather returns a pointer to the image in memory. The wrapper
function cDevice::GrabImageFile() can be used to write the grabbed image
directly to a file. Plugins that used the old version of cDevice::GrabImage()
need to be adapted to the new interface.
- The new class cBase64Encoder (see tools.h) can be used to encode data in
base64 (thanks to Bob Withers for publishing his Base64 class).
- The SVDRP command GRAB now writes the image data to the SVDRP connection
(encoded in base64) if the given file name consists of only the file
extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file
name (based on a suggestion from Darren Salt).
A simple way of viewing a grabbed image on a remote host is:
svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display -
- The new command line option '-g' must be given if the SVDRP command GRAB
shall be allowed to write image files to disk. The parameter to this option
must be the full path name of an existing directory, without any "..", double
'/' or symlinks. By default, or if "-g- is given, grabbing to files is
not allowed any more because of potential security risks.
- Modified the way the SVDRP command GRAB writes the grabbed image to a file
to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino
Peña):
+ The file handle is now opened in a way that it won't follow symbolic links
(suggested by Darren Salt).
+ The given file name is now canonicalized, so that it won't contain any
".." or symlinks (suggested by Darren Salt).
+ Grabbing to files is limited to the directory given in the the command
line option '-g'. By default grabbing to files is not allowed any more.
- Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos).
- Changed all "illegal" to "invalid" in error messages (there's nothing "illegal"
in VDR ;-).
- When started as user 'root' VDR now switches to a lesser privileged user id,
keeping the capability to set the system time (based on a patch from Ludwig
Nussel). By default the user id 'vdr' is used, which can be changed through
the new command line option '-u'. Note that for security reasons VDR will no
longer run as user 'root' (unless you explicitly start it with '-u root',
but this is not recommended!). The 'runvdr' script has been changed to
use the '-u' option.
- Changed the API of the functions cStatus::Recording() and cStatus::Replaying(),
so that they can provide the full file name of the recording. Plugins that use
these (or the related cStatus::Msg...() functions) need to be adapted
(suggested by Andreas Brugger).
- The DVB devices now retune (and, if applicable, resend the DiSEqC data) if
the lock is lost (based on a patch from Reinhard Nissl).
- Fixed handling multi byte key sequences in cKbdRemote (based on a patch from
Jürgen Schneider).
- Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco
Schlüßler).
- Made the static cControl functions thread safe (thanks to Patrick Fischer).
- Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid
warnings with g++ 4.1.0 (thanks to Ville Skyttä).
- Fixed incrementing the 'state' variables in the repacker classes in remux.c
to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä).
- The Makefile now reports a summary of failed plugins (thanks to Udo Richter).
- The cTimer constructor can now take an optional cChannel (suggested by
Patrick Fischer).
- Fixed setting the main thread id if VDR is running as a daemon.
- Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl).
- Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner).
- Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger).
- Now using FE_READ_STATUS to read the current frontend status (suggested by
Holger Wächtler).
- The "Menu" key now behaves consistently. If there is anything on the OSD, it
is closed when the "Menu" key is pressed, and if there is nothing on the OSD,
the "Menu" key opens the main menu (suggested by Luca Olivetti).
- The new option "Setup/OSD/Timeout requested channel info" can be used to turn
off the automatic timeout of the channel display in case it was invoked by
a press of the "Ok" key (suggested by Thiemo Gehrke).
- A message is now given when an instant recording is started (suggested by
Helmut Auer). Actually the code was already there, just commented out - don't
remember why it wasn't active...
- Removed an obsolete "Summary" text from i18n.c and preceded all key definition
texts with "Key$" to avoid duplicates (reported by Lucian Muresan).
- Preceded all button texts with "Button$".
- Removed obsolete "Eject", "Language" and "scanning recordings..." texts.
- Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill).
- Disabled the use of "fadvise" in cUnbufferedFile because there have been
several reports that it causes more problems than it solves (suggested by
Petri Hintukainen). If you want to use "fadvise", you can activate the line
//#define USE_FADVISE
in tools.c.
- Removed unused 'offset' member from cOsdItem.
- In the "Channels" menu the numeric keys now position the cursor to the channel
with the given number (see MANUAL, section "Remote Control Keys", note (3) for
details).
- The "Mark/Move" function in the "Channels" menu now also works in the non-numeric
sort modes.
- The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if
this is a menu.
- The new "Info" key brings up information on the currently viewed programme
or recording. For a live programme this is the same as "Schedule/Ok", i.e. the
description of the current EPG event. For a recording this is the same as shown
by the "Info" button in the "Recordings" menu. Plugins that implement players
can overwrite their cControl::GetInfo() function to show their own info (see
PLUGINS.html for details). Pressing the "Info" key again while the info is
displayed will close the OSD. In order to assign this new key to an existing
remote control setup, the remote.conf file needs to be deleted and VDR has
to be restarted to go through the process of learning the remote control keys.
- Any cReceivers still attached to a cDevice when that device switches to a
different transponder are now automatically detached (suggested by Patrick
Fischer).
- The "flags" of a timer are now handled as an unsigned integer value. In order
to do this, the interface of cMenuEditBitItem also had to be changed.
- In string entry fields (like, e.g., the file name of a recording) the characters
can now be entered by pressing the numeric keys, the same way as on a
telephone keypad (based on the "Easy Input" patch from Marcel Schaeben).
- Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch
from "single shot" to "weekly", followed by the "Right" key (reported by
Andreas Böttger).
- The file 'ca.conf' is obsolete and has been removed.
- Revised all descriptions regarding CICAM.
- Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling.
- Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack()
(thanks to Reinhard Nissl).
- Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo
Schneider).
- Cleaned up some trailing white space.
|
|
- Updated 'sources.conf' (thanks to Philip Prindeville).
- Now using daemon() instead of fork() to run VDR in daemon mode (thanks to
Enrico Scholz).
- Fixed a possible endless loop in a menu with no selectable items if
Setup.MenuScrollWrap is true (thanks to Enrico Scholz).
- Making sure no item is displayed as "current" if Up, Down, Left or Right is
pressed in a menu with no selectable items.
- Added '__attribute__' to functions that use printf() like parameters (thanks
to Darren Salt).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed a leftover 'summary.vdr' in vdr.1 (reported by Christoph Hermanns).
- Added more error messages and line numbers when reading EPG data and info.vdr
(thanks to Peter Bieringer).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Added missing mutex locks to cCiMenu::Abort() and cCiEnquiry::Abort() (reported
by Marco Schlüßler).
- Fixed lock handling in CAM communication to avoid problems with multiple CAMs
per device or CAMs with more than one smart card.
- Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos).
- Updated the French OSD texts (thanks to Nicolas Huillard).
- Fixed the cFilter example in PLUGINS.html (reported by Patrick Fischer).
- The new class cUnbufferedFile is used for the recording files to avoid
trashing the file system cache (based on a patch by Ralf Müller).
|
|
- Fixed a race condition in cTransfer (thanks to Klaus Heppenheimer for reporting this one).
In doing so, the 'active' variables used by the actual derived cThread classes
have been replaced by the cThread::Running() function.
Plugin authors may want to check their derived cThread classes and replace any 'active'
variables the same way as, for instance, done in transfer.c.
- Fixed handling EPG data for time shifted events (thanks to Marco Schlüßler).
- Increased the default value for 'Min. user inactivity' to 300 minutes (suggested
by Helmut Auer).
- Now storing the channel id in the info.vdr file even if there is no EPG info
available (thanks to Andreas Brachold for reporting that there are empty info.vdr
files created in that case).
- Added some 'mkdir -p' to the Makefile's 'install' target (thanks to Wayne Keer).
- Changed the title of the recording info menu (thanks to Rolf Ahrenberg).
- Fixed handling the frame number display if '7' is pressed before the first editing
mark, or '9' after the last one (thanks to Thomas Günther).
- Now discarding any previous numerical input to switch channels if Up, Down, Channel+,
Channel-, Left or Right is pressed (thanks to Wolfgang Rohdewald for reporting a
problem with this).
- Pressing Ok while entering a channel number now immediately switches to that
channel, without waiting for further input.
- Avoiding unnecessary OSD draw operations caused by the audio track description
display in the ST:TNG skin's channel display (thanks to Oliver Endriss for reporting
this).
- Removed the VIDEO_STILLPICTURE_WORKS_WITH_VDR_FRAMES stuff from
cDvbDevice::StillPicture(), since apparently the VIDEO_STILLPICTURE call works.
|
|
- Making sure at least the default skin is available at program start in case a
plugin needs to issue an error message (thanks to Achim Tuffentshammer for
reporting a crash in such a case). Also checking if there is a current skin
in cSkins::Message().
- Completed the Finnish OSD texts and fixed internationalization of the text
for "Setup/DVB/Audio language(s)" (thanks to Rolf Ahrenberg).
- Completed the Estonian OSD texts and switched to iso8859-13 character set
(thanks to Arthur Konovalov).
- Made cCondWait::SleepMs() sleep at least 3ms to avoid a possible busy wait.
- Fixed canceling the LIRC thread (thanks to Marco Schlüßler for pointing out
this one).
- The "Green" button in the "Main" menu is now always "Audio", since the audio
channel might be changed even if there is only one actual audio PID.
- Fixed handling the '-E' option which was broken in version 1.3.18 (thanks to
Christian Jacobsen for reporting this one).
- Added 'channels.conf.terr' entries for Mainz (thanks to Michael Heyse).
- Implemented cDolbyRepacker for better handling of Dolby Digital PES packets
(thanks to Reinhard Nissl).
- Fixed playing files with PES packets longer than 2048 byte through the full
featured DVB card (thanks to Marco Kremer for reporting this one and providing
a test sample).
- Recording and Transfer Mode now handle more than 2 audio PIDs. For this the
interfaces of the following functions have been changed:
cTransferControl::cTransferControl()
cTransfer::cTransfer()
cRecorder::cRecorder()
cReceiver::cReceiver()
cRemux::cRemux()
- Fixed a possible race condition in cDevice::Action() and cTSBuffer::Action()
(thanks to Stefan Huelswitt).
- Extended some buffer sizes to allow handling HDTV streams (thanks to Reinhard
Nissl).
- Added 'channels.conf.terr' entries for Düsseldorf and Köln (thanks to Walter Koch).
- Falling back to 'stereo' when switching channels in case the user had switched
to 'left' or 'right' (suggested by Rolf Groppe).
- Completed the Danish OSD texts (thanks to Mogens Elneff).
- Recording and Transfer Mode can now handle up to 8 Dolby Digital tracks (thanks
to Marco Schlüßler for a patch that implements substream handling into
cDevice::PlayPesPacket(), and Reinhard Nissl for adding substream handling to
cDolbyRepacker).
- Added PlayPes(NULL, 0) to cTransfer::Action() when clearing the transfer buffer
to avoid overflows (thanks to Marco Schlüßler for pointing this out).
|
|
- Removed an unused variable from cTimer::GetWDayFromMDay() (thanks to Wayne Keer
for reporting this one).
- Some more changes to the 'childTid' handling in cThread (based on suggestions by
Stefan Huelswitt).
- Fixed the spelling of 'canceling' (thanks to Wayne Keer for reporting this one).
- Re-introduced a sleep to cDvbPlayer::Action() to avoid high CPU load in still
picture mode (thanks to Reinhard Nissl for reporting this one).
- Fixed a possible race condition in generating the DVB device names (thanks to
Rainer Zocholl for reporting this one).
- Changed the way PES packets are played to allow replay of AC3 sound over the
full featured DVB cards (partially based on a patch from Werner Fink).
+ The new function cDevice::PlayPes() is now called with the complete PES data
stream and calls PlayVideo() and PlayAudio() as necessary.
+ cDevice::PlayVideo() is now only called with actual video PES packets.
+ cDevice::PlayAudio() is now called with the actual audio PES packets, which
can be either "normal" audio or AC3 data. You need at least firmware version
0x261d to replay AC3 sound over a full featured DVB card. This function now
has an 'int' return value.
+ PlayAudio() of derived cDevice classes shall no longer call the base class
function. It shall just play the given data as audio.
+ cPlayer::PlayVideo() and cPlayer::PlayAudio() are now obsolete and have been
replaced with cPlayer::PlayPes().
+ All StripAudioPackets() functions are now obsolete. The functionality has been
moved into cDevice::PlayPes(), where only the video and audio packets that are
actually required will be processed.
+ All audio track handling is now done by cDevice; cTransfer and cDvbPlayer no
longer care about audio tracks. cPlayer, however, still has the virtual hooks
for audio track handling in order to allow plugins to implement players that
have their own idea about this.
+ cChannel::[AD]pid[12]() have been replaced with cChannel::[AD]pid(int i) to
allow access to all available PIDs.
- Escaped the '-' and 'ö' characters in the man pages (thanks to Darren Salt for
pointing this out).
- Completed the Italian OSD texts (thanks to Sean Carlos).
- Fixed setting 'synced' in cRemux when recording radio channels (thanks to
Laurence Abbott).
- Removed the LOCK_THREAD from the LIRC thread (thanks to Ludwig Nussel).
- Fixed genfontfile.c (sometimes the character width was wrong, and the codes were
shifted one too far to the left).
- Fixed the character width and shifted the codes one to the right in all font
files.
- Renamed font???.c to font???-iso8859-1.c for symmetry.
- Switched the character set to iso8859-15 for English, German and Finnish (thanks
to Andreas Brugger for reporting the missing Euro sign in iso8859-1).
- Added 'channels.conf.terr' entries for Lübeck (thanks to Stefan Hußfeldt).
- Fixed a race condition in starting a thread (thanks to Reinhard Nissl for
reporting this one).
- Replaced non-threadsafe library functions with their threadsafe versions (thanks
to Rainer Zocholl for pointing this out).
- Other non-threadsafe functions have been replaced by threadsafe classes that hide
the actual buffering. In particular these are:
readdir() -> cReadDir
readline() -> cReadLine
- Several formerly non-threadsafe functions now have a return type of cString:
cChannel::ToText()
tChannelID::ToString()
cEvent::GetDateString()
cEvent::GetTimeString()
cEvent::GetEndTimeString()
cEvent::GetVpsString()
cMark::ToText()
cTimer::ToText()
cSource::ToString()
cTimer::PrintDay()
cTimer::PrintFirstDay()
PrefixVideoFileName()
IndexToHMSF()
ChannelString()
strescape()
AddDirectory()
itoa()
WeekDayName()
DayDateTime()
When using these functions in a 'const char *' context there is nothing special
to consider, except that you can no longer have a pointer to the return value,
as in
const char *date = DayDateTime();
Although this will compile without error message, the resulting 'date' will not
be valid after this line. Use this instead:
cString date = DayDateTime();
In a 'const void *' context (as in printf() etc.) the result needs to be
dereferenced with a '*', as in
printf("%s", *DayDateTime());
to make it a 'const char *'.
- Removed delay_ms(), using cCondWait::SleepMs() instead.
- Replaced time_ms() with a threadsafe and non-overflowing cTimeMs (thanks to Rainer
Zocholl for pointing out this problem).
- Added cDevice::mutexReceiver to avoid a race condition when attaching/detaching
receivers from different threads.
- The new remote control button "Audio" can be used to switch between different
audio tracks. The "Green" button in the "Main" menu has been changed from "Language"
to "Audio", since it now also controls switching between normal and Dolby Digital
audio tracks (see MANUAL for details).
- The description of the audio tracks is now taken from the "component descriptors"
that are broadcast in the EPG data. However (as no big surprise), not all channels
actually provide useful data here, so there are now some additional EPG bugfixes,
which can be activated by setting the "EPG bugfix level" to 3.
- The format of the 'epg.data' files has been extended by the new tag 'X', which
contains the stream components of an event (see man vdr(5) for details).
- The cStatus class now has the new member function SetAudioTrack(), which can be
used to get notified when the audio track has been switched, and the new member
function SetAudioChannel() which is called when the audio channel is changed.
- Skins need to implement the new cSkinDisplayTrack class to display the audio
track menu.
- The ST:TNG skin now displays the current audio track description (if any) at the
botton left side.
- The new setup option "DVB/Audio languages" can be used to control which audio
language shall be selected in case a channel broadcasts in different languages
(see MANUAL for details).
- The "Left" and "Right" keys in the "Audio" menu can be used to switch between
the left and right stereo channels in case there are different audio tracks
in these channels (see MANUAL for details).
- Fixed a possible race condition in cDevice::Action() (thanks to Mattias Grönlund).
- Fixed the default quality value when grabbing a JPEG image (thanks to Patrick
Gleichmann).
- Fixed deleting a menu item in case the next item is not selectable (thanks to
Dino Ravnic).
- Implemented displaying mandatory subtitles in the SPU decoder (thanks to Marco
Schlüßler).
- The setup option "Recording/Record Dolby Digital" has been renamed and moved to
"DVB/Use Dolby Digital". It now controls whether Dolby Digital is recorded and
whether an available DD audio track will appear in the "Audio" menu.
- Added support for circular polarization (thanks to Jonan Santiago).
- Thanks to Werner Fink, Reinhard Nissl, Sascha Volkenandt and Bjørnar Nilsen for
their support in testing and fine tuning this version.
|
|
- Fixed checking for the presence of NPTL (thanks to Jouni Karvo).
- Making sure section filters are only set if the device actually has a lock
(thanks to Andreas Share for pointing this out).
- Fixed a possible NULL pointer assignment in cMenuText::SetText() (thanks to
Marco Schlüssler).
- Fixed a crash in case the last line in channels.conf is a group separator and
that group is selected in the channel display (thanks to Dick Streefland).
- Added cRingBufferLinear::Read() to read directly from a file handle into the
ring buffer.
- Using timeouts in ring buffers to avoid 'usleep()'.
- Clearing the 'Transfer Mode' ring buffer after clearing the device to avoid
an "almost full" ring buffer.
- Removed locking from cRingBufferLinear for better performance under high load.
- Using a cRingBufferLinear in cRemux to avoid unnecessary copying of data.
- Using a cRingBufferLinear in cTSBuffer and filling it in a separate thread
to avoid buffer overflows. Plugins using cTSBuffer will need to remove the
call to the now obsolete Read() function (see cDvbDevice::GetTSPacket() for
the new usage of cTSBuffer).
- cRemux::Process() has been split into Put(), Get() and Del() to allow for a
better decoupling of the remuxing and disk writing process. Plugins using
cRemux will need to be modified accordingly.
- The actual disk writing in recordings is now done in a separate thread to
improve the overall throughput.
- Changed cRemux so that it returns the maximum available amount of data with
each call, not just 2048 byte.
- Added a visual display of all cRingBufferLinear buffers for debugging. To
activate it, define DEBUGRINGBUFFERS in ringbuffer.h.
- Instead of cCondVar now using the new cCondWait (which also avoids a possible
"near miss" condition; thanks to Sascha Volkenandt for pointing out this one).
cCondVar is still present for plugins that use it (and VDR itself also still
uses it in cRemote).
- The cRingBuffer now does EnableGet()/EnablePut() only if the buffer is more than
one third full or empty, respectively. This dramatically improves recording
performance and reduces system load (thanks to Marco Schlüßler for doing some
testing regarding buffer performance and giving me some hints that finally led
to finding out that this was the basic problem causing buffer overflows).
- Improved Transfer Mode (thanks to Marco Schlüßler for suggestions and testing).
- Fixed a possible crash with inconsistent SI data (thanks to Marcel Wiesweg).
- Fixed showing the replay mode if the OSD is currently in use (thanks to Kimmo
Tykkala for pointing out this problem).
- cOsdProvider::NewOsd() now always returns a valid pointer, even if the OSD is
currently in use (it will then return a dummy cOsd object and write a message to
the log file).
- Added Estonian language texts (thanks to Arthur Konovalov).
- Fixed 'newplugin' and libsi/Makefile to use the compiler defined in $(CXX) for
generating file dependencies (thanks to Andreas Brachold).
- Moved the initialization of aPid1 and aPid2 to the beginning of cDvbDevice::cDvbDevice()
to have them set in case a patch references them (thanks to Wayne Keer for pointing
this out).
- Completed the Russian OSD texts (thanks to Vyacheslav Dikonov).
- Avoiding unnecessary section filter start/stops (thanks to Marco Schlüßler).
- Made the "Channel not available!" message and mtInfo instead of mtError (suggested
by Wayne Keer).
- Made volume control more linear (thanks to Emil Naepflein and Udo Richter).
- Now skipping code table info in SI data (suggested by Milos Kapoun).
- Added missing Czech characters to fontosd-iso8859-2.c (thanks to Milos Kapoun).
- Fixed a crash in the time search mechanism (reported by Reinhard Nissl).
- If one PID can't be added, the whole cDevice::AttachReceiver() will now fail
and all PIDs added so far will be deleted (thanks to Marco Schlüßler for
pointing out this one).
- Now only saving channels.conf after a modification made by the user (avoids
lots of disk access due to automatic channel updates). Automatic channel
modifications will be saved every 10 minutes if no recording is currently
active.
- Removed the 'Log' parameter from the cChannel::Set... functions. Instead
checking if the channel has a non-zero number.
- Updated 'channels.conf.terr' for Hannover (thanks to Sven Kreiensen).
|
|
- Fixed a memory leak in thread handling when using NPTL (thanks to Jon Burgess).
- Fixed handling Setup.RecordDolbyDigital, which was broken since version 1.1.6.
- Fixed handling text lengths for itemized EPG texts (thanks to Marcel Wiesweg).
- Fixed the help for LSTE and LSTR (was broken in 1.3.6).
- Improved iso8859-7 fonts (thanks to Dimitrios Dimitrakos).
- Added some 3-letter language codes (thanks to Marcus Mönnig).
- Added language code handling to the subtitling descriptor in 'libsi' (thanks to
Pekka Virtanen).
- Moved several menu item classes from menu.c to menuitems.[hc] to make them
available for plugins.
- The epg2html.pl script now handles '|' in description texts.
- The new setup option "OSD/Use small font" can be used to control the use of
the small font (see MANUAL for details).
- Swapped osd.[hc] and osdbase.[hc] to have the virtual OSD base class named cOsd.
Plugins may need to adjust their #include statements.
- Colors are now given as AARRGGBB instead of AABBGGRR. The values are mapped to
the driver's (wrong) sequence in dvbosd.c (this should really be fixed in the
driver, together with the endian problem).
- The new OSD setup parameters "Left" and "Top" can be used to define the top left
corner of the OSD.
- The OSD size parameters are now in pixel (as opposed to formerly characters).
When reading a 'setup.conf' file from an older version of VDR, the OSDwidth
and OSDheight values will be converted to pixel automatically.
- The OSD is now fully device independent. See the comments in VDR/osd.h and the
description in PLUGINS.html for information on how a plugin can implement an OSD
display on arbitrary hardware.
- The OSD (actually its cBitmap class) can now handle XPM files. There are several
XPM files in the VDR/symbols directory which can be used by skins (some of these
have been taken from the "elchi" patch). See VDR/skinsttng.c for examples on how
to use these.
- Due to the changes in the OSD handling the DEBUG_OSD option for a textual OSD
has been dropped. There will be a plugin that implements a skin with this
functionality later.
- The entire OSD display can now be implemented via "skins". See VDR/skins.[hc],
VDR/skinclassic.[hc], VDR/skinsttng.[hc] and PLUGINS.html for information on how
a plugin can implement its own skin. By default VDR comes with a "Classic" skin
that implements the OSD display known from previous versions, and the new skin
named "ST:TNG Panels", which is also the default skin now. The actual skin can
be selected through "Setup/OSD/Skin".
- The colors used in a skin can now be configured using "themes". See PLUGINS.html
for information on how a skin can make use of themes, and man vdr(5) for the
structure of a theme file. The actual theme to use can be selected through
"Setup/OSD/Theme".
- Added Croatian language texts (thanks to Drazen Dupor).
NOTE: there is apparently a problem with the newly introduced iso8859-2 font,
because as soon as Setup/OSD/Language is set to Croatian (currently the last one
in the list) everything freezes and the vdr processes have to be killed with -9
and the driver needs to be reloaded. Maybe somebody else can find out what's
going wrong here...
- Added missing NULL checks when accessing sectionHandler in device.c (thanks to
Pekka Virtanen).
- Fixed setting the time from the DVB data stream (thanks to Helmut Auer for
pointing out a frequency/transponder handling mixup). This now also takes the
actual source (sat, cable etc.) into account. Please go into "Setup/EPG" and
set the "Set system time" and "Use time from transponder" parameters accordingly
(this is necessary even if you have already set them before!).
|
|
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed some descriptor handling in 'libsi' (thanks to Stéphane Esté-Gracias).
- Fixed handling the current menu item (thanks to Marc Hoppe).
- Fixed assigning events to timers (they no longer get "stuck").
- Added log entries whenever the running status of an event changes (currently
only logging the first 30 channels).
- Fixed handling timers in VPS margin if the EPG scan is turned on (the EPG scan
switched the device away from the channel, so it wouldn't see the change of
the running status).
- Fixed handling "itemized" texts in EPG data (thanks to Stéphane Esté-Gracias
for pointing out this problem, and Marcel Wiesweg for improving 'libsi').
- Fixed handling VPS times at year boundaries.
- Avoiding too many consecutive "ring buffer overflow" messages (which only
slowed down performance even more).
- Taking the Sid into account when detecting version changes in processing the
PMT (thanks to Stéphane Esté-Gracias for pointing out this problem).
- Completed the Russian OSD texts (thanks to Vyacheslav Dikonov).
- Any newline characters in the 'description' of EPG events are now preserved
to allow texts to be displayed the way the tv stations have formatted them.
This was also necessary to better display itemized texts.
- Fixed detecting the running status in case an empty EPG event is broadcast (thanks
to Michael Pennewiß for pointing this out).
- Improved performance when paging through very long menu lists.
- Removed cSchedule::GetEventNumber() and cSchedule::NumEvents(). There is now
cSchedule::Events() that returns the list of events directly.
- Avoiding occasional bad responsiveness to user interaction caused by assigning
events to timers.
- Now explicitly turning on the LNB power at startup, because newer drivers don't
do this any more (thanks to Oliver Endriss for pointing this out).
|
|
- Changed thread handling to make it work with NPTL ("Native Posix Thread Library").
Thanks to Jon Burgess, Andreas Schultz, Werner Fink and Stefan Huelswitt.
- The cThread class now accepts a 'Description' parameter, which is used to log
the beginning and end of the thread, together with its process and thread id.
For descriptions that need additional parameters you can use the function
cThread::SetDescription(), which accepts 'printf()' like arguments.
Existing plugins that use threads should be changed to use this functionality
instead of explicit 'dsyslog()' calls inside their Action() function in order
to support logging the thread ids.
- Added "Slovak Link" and "Czech Link" to 'ca.conf' (thanks to Emil Petersky).
However, 'ca.conf' is now pretty much obsolete due to the automatic CA handling.
- Mutexes are now created with PTHREAD_MUTEX_ERRORCHECK_NP, which makes the
'lockingTid' stuff obsolete (thanks to Stefan Huelswitt).
- Changed font handling to allow language specific character sets.
- Adopted the small font character set from the "Elchi" patch (originally
provided by Alessio Sangalli).
- Greek language texts now use iso8859-7 character set (thanks to Dimitrios
Dimitrakos).
- Rearranged section data handling, so that the actual data handling can be done
separately, even from within plugins.
- The EPG data structures have been moved from eit.[hc] to epg.[hc] and have been
adapted to the general VDR coding style. Plugins that use these data structures
may need to change some function names (which should be obvious).
The name 'subtitle' has been changed to 'shortText' to avoid clashes with actual
subtitles that are part of a movie. The name 'extendedDescription' has been
shortened to 'description'.
- Replaced 'libdtv' with 'libsi' (thanks to Marcel Wiesweg), which is thread
safe and can be used by multiple section filters simultaneously.
- Added 'cRwLock' to 'thread.[hc]'. Note that all plugin Makefiles need to
define _GNU_SOURCE for this to work (see the example plugin Makefiles and
'newplugin').
- Fixed a problem with crc32 in SI handling on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Fixed an alignment problem in CAM access on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Added 'StreamType' setting to CAM communication, which is important for
Aston/SECA CAMs (thanks to Antonino Sergi).
- Now the CA descriptors are sent to the CAM in the 'program' or 'ES level'
sections, depending on where they are found in the PMT (thanks to Hans-Peter
Raschke for reporting this one). This should make SkyCrypt CAMs work.
- Now using the 'version number' of EPG events to avoid unnecessary work.
- Channel data is now automatically derived from the DVB data stream (inspired
by the 'autopid' patch from Andreas Schultz).
- The current channel is now automatically re-tuned if the PIDs or other settings
change. If a recording is going on on a channel that has a change in its
settings, the recording will be stopped and immediately restarted to use the
new channel settings.
- EPG events now use the complete channel ID with NID, TID and SID.
- Channel names in 'channels.conf' can now have a short form, as provided
by some tv stations (see man vdr(5)). Currently channels that provide short
names in addition to long ones are listed in the OSD as "short,long name",
as in "RTL,RTL Television". The short names will be used explicitly later.
- The Ca parameter in 'channels.conf' has been extended and now contains all the
CA system ids for the given channel. When switching to a channel VDR now tests
for a device that provides one of these CA system ids. The devices automatically
get their supported ids from the CI handler.
- The values in 'ca.conf' are currently without any real meaning. Whether or not
a channel with conditional access can be received is now determined automatically
by evaluating its CA descriptors and comparing them to the CA system ids
provided by the installed CAM. Only the special values 1-16 are used to assign
a channel to a particular device.
- Increased the maximum number of possible OSD colors to 256.
- Limited the line length in the EPG bugfix report, which appears to fix a buffer
overflow that caused a crash when cleaning up the EPG data (at 05:00 in the
morning).
|
|
- Fixed a bug in channel switching after Left/Right has been pressed (thanks to
Michael Walle for reporting this one).
- Improved channel switching in case of numerical input by switching as soon as
the channel is unique (suggested by Jaakko Hyvätti).
- Fixed creating a new channel in the "Channels" menu in case the 'channels.conf'
contains ':@nnn' lines with no text (thanks to Guy Roussin for reporting this
one).
- Changed the behaviour of the '0' key in normal viewing mode so that a channel
only qualifies as "previous" if it has been selected for at least 3 seconds
(suggested by Thomas Keil).
- Now clearing the channel info display when entering numeric keys to switch
channels (suggested by Guy Roussin).
- Added missing I18N entry for "Ppid" (thanks to Rolf Ahrenberg).
- Fixed handling the color buttons in the "Edit channel" menu (thanks to Thomas
Keil for reporting this one).
- Fixed an occasional "Broken pipe" error in SVDRP connections (thanks to Gerhard
Steiner for reporting this one).
- Fixed checking CA capabilities with the dvb-kernel driver (thanks to Kenneth
Aafløy).
- Fixed selecting the device, because sometimes an FTA recording terminated a
CA recording (thanks to Emil Naepflein).
- Fixed a possible crash in case a VFAT file system is used without compiling VDR
with VFAT=1 (thanks to Ernst Fürst for reporting this one).
- Now the program uses the values of VIDEODIR and PLUGINDIR defined in Makefile
or Make.config as defaults (thanks to Steffen Barszus).
- Added the usual menu timeout to the CAM menus.
|
|
- Removed a faulty parameter initialization in menu.c (thanks to Lauri Tischler for
reporting this one).
- Re-implemented the WaitForPut/WaitForGet stuff in cRingBuffer, since some plugins
actually need this. By default the buffer does not wait; if a plugin needs the
waiting functionality it can call the new SetTimeouts() function.
- Moved the call to cPlugin::Start() further up in vdr.c, to make sure it gets
called before trying to learn the keys (problem reported by Oliver Endriss).
- No longer starting the editing process if no marks have been set (thanks to
Matthias Raus for reporting this one).
- Added Catalanian language texts (thanks to Marc Rovira Vall and Ramon Roca).
Plugin authors may want to add the new entries to their I18N texts and contact
the translators to have their texts translated. Note that there are now 16
different OSD languages, so please make sure you have 16 versions for each of
your texts.
- Moved the detection of a broken video data stream from the cDevice into the
cRecorder to avoid problems with cReceivers that want to receive from PIDs
that are currently not transmitting (thanks to Marcel Wiesweg for reporting
this one).
- Fixed setting the locking pid after a timed wait (thanks to Andreas Schultz).
- Avoiding spurious section filter settings after a channel switch.
- Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt).
- Fixed reading 'epg.data' for channels with non-zero RID (thanks to Oliver
Endriss for reporting this one).
- Fixed EPG bugfix statistics to avoid log entires for undefined channels (thanks
to Lars Bläser for reporting this one).
- No longer waiting inside cIndexFile::CatchUp() to avoid shortly blocking replay
at the end of a recording.
|
|
- Added 'Hrvatska radiotelevizija' and 'RTV Slovenija' to ca.conf (thanks to
Paul Gohn).
- Implemented actual user input for CAM enquiry menus.
- Since disk file systems apparently don't honor the O_NONBLOCK flag to read from
a file in non-blocking mode the cDvbPlayer now uses a non blocking file reader
class to make sure replay remains smooth even under heavy system load.
- Increased the maximum possible packet size in remux.c to avoid corrupted streams
with broadcasters that send extremely large PES packets (thanks to Teemu Rantanen).
- Added TS error checking to remux.c (thanks to Teemu Rantanen).
- Modified cRingBufferLinear to avoid excessive memmove() calls in 'Transfer Mode'
and during recordings, which dramatically reduces CPU load. Thanks to Teemu
Rantanen for pinpointing the problem with the excessive memmove() calls.
- Updated 'channels.conf' (thanks to Achim Lange).
- Added/improved Swedish language texts (thanks to Jan Ekholm).
- Fixed the description of the "Scroll pages" OSD setup parameter ('yes' and 'no'
were mixed up).
- Fixed handling the LOG_LOCALn parameters in the -l option (thanks to Dimitrios
Dimitrakos).
- Changed EIT processing to always read a full section.
- Fixed handling user defined CFLAGS in libdtv/libvdr/Makefile (thanks to Clemens
Kirchgatterer and Robert Schiele).
- Fixed skipping unavailable channels in the EPG scanner.
|
|
- Fixed the 'channels.conf' entries for "Studio Universal" and "Disney Channel".
- Fixed handling channels in the "Channels" menu in case there are ':@nnn' group
separators without names (thanks to Guy Roussin for reporting this one).
- The SVDRP command CHAN now also accepts channel IDs.
- Increased the timeout until an index file is considerd no longer to be written
(sometimes in time shift with heavy system load the index file was closed too
early by the replay thread).
- Implemented "Link Layer" based CAM support, which hopefully will solve the
problems with CAMs we had in the past. To use this you need the driver version
2002-01-08 or higher (with the new firmware supporting the "Link Layer" protocol).
- Added an EPG bugfix that moves the Subtitle data to the Extended Description in
case the latter is empty and the Subtitle exceeds some useful length.
- Since several channels put very long strings into the Subtitle part of their
EPG data, that string is now limited in length when used in a recording's
file name.
|
|
- Added cDevice::DeviceNumber() to get the number of a device, not counting any
gaps that might be in the index count.
- Fixed fetching the current/next information to handle cases where the duration
of an event is set wrongly and would last beyond the start time of the next
event.
- Adapted type names to the new HEAD version of the driver (which the previous
NEWSTRUCT branch has been merged into). Note that to use this driver version
you still need to add NEWSTRUCT=1 to the make call when building VDR. You
need a HEAD version of the LinuxDVB driver dated 2002-10-11 or later to compile
VDR with NEWSTRUCT=1.
- Fixed radio channels in channels.conf.cable (thanks to Robert Schiele and Uwe
Scheffler).
- Fixed switching the video format in the Setup/DVB menu (thanks to Uwe Scheffler
for reporting this one).
- Reactivated full handling of second audio PID (even in 'Transfer Mode').
- Fixed a crash when closing down with remote control plugins (thanks to Oliver
Endriss helping to debug this one).
- Commands in the file 'commands.conf' can now have a '?' at the end of their
title, which will result in a confirmation prompt before executing the
command.
- Changed a few leftover 'new char[...]' to MALLOC(char, ...).
- If a command executed from the "Commands" menu doesn't return any output, the
OSD will now be closed automatically.
- The SVDRP command PUTE now triggers an immediate write of the 'epg.data' file
(suggested by Gerhard Steiner).
- The new configuration file 'reccmds.conf' can be used to define commands that
shall be executed from the "Recordings" menu; see MANUAL and 'man vdr(5)' for
details (suggested by Gerhard Steiner).
|
|
- Fixed the 'newplugin' script to make it name the target for creating the
distribution package 'dist', as stated in the PLUGINS.html documentation.
If you have already created a plugin source directory and Makefile you may
want to check it and replace the 'package' target with 'dist' if necessary.
- Changed device handling for being able to do simultaneous recording and
replay on the same device (Time Shifting). In order for this to work you need
to use a driver with a firmware version that has this feature implemented.
- cDevice::ProvidesCa() is no longer virtual. The new function
cDevice::ProvidesChannel() is now used to determine whether a device can
receive a given channel, and by default this function returns false. So a
device that is a pure replaying device doesn't need to do anything here.
- Increased the recorder buffer size to 5MB in order to be able to better handle
multiple recordings.
- Implemented cTSBuffer for better handling TS packet buffering in derived
cDevice classes.
- Changed the interface if cDevice::GetTSPacket() to avoid unnecessary copying
of data.
- Removed cDevice::Channel(), since this makes no more sense with devices
receiving multiple channels.
- Switching through channels with the 'Up' and 'Down' keys now skips channels
that are currently not available (for instance because all devices are
recording and these channels are on different transponders).
- Implemented an SPU decoder (thanks to Andreas Schultz).
- Fixed a crash when entering an integer value outside the limits (thanks to
Stefan Huelswitt for reporting this one).
- Added play mode pmAudioOnlyBlack (thanks to Stefan Huelswitt).
|
|
- Improved the VDR Makefile to avoid a warning if the '.dependencies' file does
not exist, and also using $(MAKE) to call recursive makes.
- Changed the name of the 'package' target in the plugin Makefiles to 'dist'
(following the suggestions in the "GNU Make" manual). If you already have started
a plugin project, you may want to change this in your Makefile accordingly.
- Improved the plugin Makefile to avoid a warning if the '.dependencies' file does
not exist, and also using $(shell...) to get the version numbers. If you already have
started a plugin project, you may want to change this in your Makefile accordingly.
- Fixed some function headers to make them compile with gcc 3.x (thanks to
Gregoire Favre).
- Fixed the cutting mechanism to make it re-sync in case a frame is larger than the
buffer (thanks to Sven Grothklags).
- Added an error message if the directory specified in the '-L' option can't be
accessed (suggested by Stefan Huelswitt).
- Rearranged OSD class names to make 'cOsd' available for the main OSD interface.
- Completely moved OSD handling out of the cDvbApi class, into the new cOsd.
- Implemented cStatus to allow plugins to set up a status monitor.
See PLUGINS.html for details.
- Moved the cEITScanner out of dvbapi.h/.c, into the new eitscan.h/.c.
- Added Swedish language texts (thanks to Tomas Prybil).
- Fixed parsing 'E' records in epg2html.pl (thanks to Matthias Fechner for pointing
out this one).
- Removed compiler option '-m486' to make it work on non-Intel platforms. If you
have already started a plugin project, you may want to make sure you remove this
option from your existing Makefile.
- Completely rearranged the recording and replay functions to make them available
to plugins.
- Replay is now done in a single thread (no more syncing between input and output
thread necessary).
- It is now possible to record several channels on the same transponder with "budget
cards". VDR automatically attaches a recording timer to a card that already
records on the appropriate transponder. How many parallel recordings can actually
be done depends on the computer's performance. Currently any number of recordings
gets attached to a card, so you should carefully plan your timers to not exceed
the limit. On a K6-II/450 it was possible to record three channels from transponder
12480 with a single WinTV NOVA-S.
- Timers that record two successive shows on the same channel may now overlap and
will use the same DVB card. During the time where both timers record the data
is simply saved to both files.
- The following limitations apply to this version:
+ Transfer mode doesn't work yet.
+ The '-a' option (for Dolby Digital audio) doesn't work yet.
+ Switching between different language tracks doesn't work yet.
+ Cutting doesn't work yet.
|
