| Age | Commit message (Collapse) | Author |
|---|
|
- Now including the optional user defined Make.config from the 'libsi' Makefile
(thanks to Ville Skyttä).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Fixed a memory leak in tComponent (thanks to Stefan Huelswitt and Daniel Thompson).
- Fixed a memory leak in cDvbPlayer (thanks to Stefan Huelswitt).
- Added missing text internationalization for "Starting EPG scan" (thanks to
Matthias Lötzke).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed handling transparent areas in cDvbSpuBitmap (thanks to Marco Schlüßler).
- Now also considering the "EPG linger time" when saving the EPG data to file or
listing it via LSTE (thanks to Roman Krenický).
- Fixed handling fragments of less than 4 byte in cPesAssembler (thanks to
Reinhard Nissl).
- Fixed a bug in libsi's SubtitlingDescriptor::getLength() (thanks to Marco
Schlüßler).
- When reading the channels.conf file, duplicate channels (i.e. ones that have
the same channel ID) are now automatically deleted and only the first one is
actually stored.
- Fixed handling lifetime when deciding whether to delete a recording (thanks to
Udo Richter).
- Fixed timeout handling in cRwLock::Lock() (thanks to Sascha Volkenandt for reporting
this one).
- Since there are several places in thread.c where a timeout value is calculated,
this has been put into a separate function.
- The timer status now has a new bit that is set when that timer is currently
recording (suggested by Matthias Schniedermeyer). See man vdr(5) for details.
- Removed scaling coordinates in letterbox mode from cDvbSpu - the DVD plugin, which
was the only one needing this, doesn't need it any more (thanks to Marco Schlüßler).
- No longer retuning or restarting a recording if only the language code of an
audio or Dolby PID changes.
- Now preferring budget cards when selecting a DVB device for recording.
- Recordings now avoid zero sized video data files (thanks to Wolfgang Fitz).
- Some rearrangements in cDvbPlayer::Action() to avoid lockups on NPTL systems
(thanks to Reinhard Nissl).
- Fixed a wrong inheritance in libsi's SubtitlingDescriptor::Subtitling (thanks to
Marco Schlüßler).
|
|
- Fixed cDvbDevice::SetAudioTrackDevice() to avoid a blank screen after switching
back to live mode if a recording is currently active on the primary device.
- Fixed a possible freeze in pause mode in case a device's PlayPesPacket() function
permanently returns 0 (thanks to Reinhard Nissl and Olaf Titz).
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Restricted the "setting audio track" log message to automatic changes during replay.
- Fixed handling Transfer Mode for radio channels (thanks to Andreas Regel for
reporting this one).
- Fixed handling symbolic links in cRecordings::ScanVideoDir() (thanks to Stefan
Huelswitt).
- Completed the Danish OSD texts (thanks to Mogens Elneff).
- Forcing a new resync after a call to cRemux::Clear() (suggested by Marco Schlüßler).
- The cAudio::Play() function now has an additional parameter 'uchar Id' which tells
the function the substream id of the given audio packet, so that a plugin can
take the right action for the various kinds if audio data - which now also includes
"normal" audio with ids 0xC0...0xDF (based on suggestions by Werner Fink and Macro
Schlüßler).
- Removed the "Cleared/PlayPes(NULL, 0)" handling from cTransfer::Action(), since this
is now done when attaching the player to the device (thanks to Marco Schlüßler).
- Making sure the buffer reserve in cTransfer::Action() is re-established after
clearing the buffer.
- Added DeviceClrAvailableTracks() and DeviceSetCurrentAudioTrack() to cPlayer
(thanks to Marco Schlüßler).
- Fixed a typo in detecting UTF-8 (thanks to Reinhard Nissl).
- Now using twice the buffer reserve in cTransfer if the primary DVB card is an
unmodified version with only 2MB of SDRAM, to avoid audio stuttering when
playing Dolby Digital over the DVB card (thanks to Christian Jacobsen and Chad
Flynt for suggestions and experiments in that area).
- Making sure the first audio packet is not dropped when switching to "pre 1.3.19
Dolby Digital compatibility mode".
- The 'plugins-clean' target of the Makefile now only deletes the actual plugin
library files from this version of VDR (suggested by Andreas Brachold).
- Added a missing 'resultSkipped = 0' to cRemux::Clear() (thanks to Marco Schlüßler
for reporting this one).
- The new function cDvbDevice::SetTransferModeForDolbyDigital() can be used by
plugins that implement Dolby Digital output and thus want to prevent the cDvbDevice
from starting Transfer Mode in order to replay DD over the DVB device.
- Added missing reset of the 'repacker' to cTS2PES::Clear() (thanks to Marco
Schlüßler for reporting this one).
|
|
- Fixed displaying the "Audio" menu with the "Green" button from the "Main" menu
in case there is only one audio track (thanks to Sascha Volkenandt for reporting
this one).
- Now setting primaryDevice = NULL before deleting the devices in cDevice::Shutdown()
to avoid problems in case other threads access it (thanks to Wolfgang Rohdewald for
pointing this out).
- Fixed a buffer overflow in case a station defines all 32 audio PIDs (thanks to
Christian Jacobsen for reporting this one).
- Fixed masking SubStreamType in cDevice::PlayPesPacket() (thanks to Werner Fink
for pointing out this one).
- The new function cPlugin::Stop() shall be used to stop any background activities
of a plugin. Previously this was done in the plugin's destructor, but it is
better to do this in a dedicated function that can be called early when shutting
down.
- Moved the call to SetAudioChannel(0) into cDevice::ClrAvailableTracks() to have it
executed also when starting a replay.
- Completed the Danish OSD texts (thanks to Mogens Elneff).
- Completed the French OSD texts (thanks to Olivier Jacques).
- The new setup option "OSD/Channel info time" can be used to define the time after
which the channel display is removed if no key has been pressed (thanks to
Olivier Jacques).
- Modified cDolbyRepacker to make sure PES packets don't exceed the requested length
(thanks to Reinhard Nissl).
- Fixed several memory leaks that were introduced through the use of cString (thanks
to Stefan Huelswitt for reporting these).
- Added CMD_SPU_CHG_COLCON to cDvbSpuDecoder::setTime() (thanks to Marco Schlüßler).
- Making sure the current audio track is actually one of the ones available in a
recording (thanks to Sascha Volkenandt for reporting a problem when starting
replay of a recording that has no Dolby Digital audio after switching to a channel
that has DD and selecting the DD audio track).
- Removed 'flags' from tTrackId (thought we would need this, but apparently we don't).
- Making sure the "Mute" and "Volume+/-" keys don't interfere with digital audio.
- Fixed the "pre 1.3.19" compatibility mode for old Dolby Digital recordings (thanks
to Werner Fink for pointing out that this can be triggered in the default branch).
- Calling pesAssembler->Reset() in cDevice::AttachPlayer() to avoid problems with
residual data in replay and Transfer Mode (thanks to Werner Fink for pointing this
out).
- Added MPEG1 replay capability to cPesAssembler (thanks to Stefan Huelswitt).
|
|
- Removed an unused variable from cTimer::GetWDayFromMDay() (thanks to Wayne Keer
for reporting this one).
- Some more changes to the 'childTid' handling in cThread (based on suggestions by
Stefan Huelswitt).
- Fixed the spelling of 'canceling' (thanks to Wayne Keer for reporting this one).
- Re-introduced a sleep to cDvbPlayer::Action() to avoid high CPU load in still
picture mode (thanks to Reinhard Nissl for reporting this one).
- Fixed a possible race condition in generating the DVB device names (thanks to
Rainer Zocholl for reporting this one).
- Changed the way PES packets are played to allow replay of AC3 sound over the
full featured DVB cards (partially based on a patch from Werner Fink).
+ The new function cDevice::PlayPes() is now called with the complete PES data
stream and calls PlayVideo() and PlayAudio() as necessary.
+ cDevice::PlayVideo() is now only called with actual video PES packets.
+ cDevice::PlayAudio() is now called with the actual audio PES packets, which
can be either "normal" audio or AC3 data. You need at least firmware version
0x261d to replay AC3 sound over a full featured DVB card. This function now
has an 'int' return value.
+ PlayAudio() of derived cDevice classes shall no longer call the base class
function. It shall just play the given data as audio.
+ cPlayer::PlayVideo() and cPlayer::PlayAudio() are now obsolete and have been
replaced with cPlayer::PlayPes().
+ All StripAudioPackets() functions are now obsolete. The functionality has been
moved into cDevice::PlayPes(), where only the video and audio packets that are
actually required will be processed.
+ All audio track handling is now done by cDevice; cTransfer and cDvbPlayer no
longer care about audio tracks. cPlayer, however, still has the virtual hooks
for audio track handling in order to allow plugins to implement players that
have their own idea about this.
+ cChannel::[AD]pid[12]() have been replaced with cChannel::[AD]pid(int i) to
allow access to all available PIDs.
- Escaped the '-' and 'ö' characters in the man pages (thanks to Darren Salt for
pointing this out).
- Completed the Italian OSD texts (thanks to Sean Carlos).
- Fixed setting 'synced' in cRemux when recording radio channels (thanks to
Laurence Abbott).
- Removed the LOCK_THREAD from the LIRC thread (thanks to Ludwig Nussel).
- Fixed genfontfile.c (sometimes the character width was wrong, and the codes were
shifted one too far to the left).
- Fixed the character width and shifted the codes one to the right in all font
files.
- Renamed font???.c to font???-iso8859-1.c for symmetry.
- Switched the character set to iso8859-15 for English, German and Finnish (thanks
to Andreas Brugger for reporting the missing Euro sign in iso8859-1).
- Added 'channels.conf.terr' entries for Lübeck (thanks to Stefan Hußfeldt).
- Fixed a race condition in starting a thread (thanks to Reinhard Nissl for
reporting this one).
- Replaced non-threadsafe library functions with their threadsafe versions (thanks
to Rainer Zocholl for pointing this out).
- Other non-threadsafe functions have been replaced by threadsafe classes that hide
the actual buffering. In particular these are:
readdir() -> cReadDir
readline() -> cReadLine
- Several formerly non-threadsafe functions now have a return type of cString:
cChannel::ToText()
tChannelID::ToString()
cEvent::GetDateString()
cEvent::GetTimeString()
cEvent::GetEndTimeString()
cEvent::GetVpsString()
cMark::ToText()
cTimer::ToText()
cSource::ToString()
cTimer::PrintDay()
cTimer::PrintFirstDay()
PrefixVideoFileName()
IndexToHMSF()
ChannelString()
strescape()
AddDirectory()
itoa()
WeekDayName()
DayDateTime()
When using these functions in a 'const char *' context there is nothing special
to consider, except that you can no longer have a pointer to the return value,
as in
const char *date = DayDateTime();
Although this will compile without error message, the resulting 'date' will not
be valid after this line. Use this instead:
cString date = DayDateTime();
In a 'const void *' context (as in printf() etc.) the result needs to be
dereferenced with a '*', as in
printf("%s", *DayDateTime());
to make it a 'const char *'.
- Removed delay_ms(), using cCondWait::SleepMs() instead.
- Replaced time_ms() with a threadsafe and non-overflowing cTimeMs (thanks to Rainer
Zocholl for pointing out this problem).
- Added cDevice::mutexReceiver to avoid a race condition when attaching/detaching
receivers from different threads.
- The new remote control button "Audio" can be used to switch between different
audio tracks. The "Green" button in the "Main" menu has been changed from "Language"
to "Audio", since it now also controls switching between normal and Dolby Digital
audio tracks (see MANUAL for details).
- The description of the audio tracks is now taken from the "component descriptors"
that are broadcast in the EPG data. However (as no big surprise), not all channels
actually provide useful data here, so there are now some additional EPG bugfixes,
which can be activated by setting the "EPG bugfix level" to 3.
- The format of the 'epg.data' files has been extended by the new tag 'X', which
contains the stream components of an event (see man vdr(5) for details).
- The cStatus class now has the new member function SetAudioTrack(), which can be
used to get notified when the audio track has been switched, and the new member
function SetAudioChannel() which is called when the audio channel is changed.
- Skins need to implement the new cSkinDisplayTrack class to display the audio
track menu.
- The ST:TNG skin now displays the current audio track description (if any) at the
botton left side.
- The new setup option "DVB/Audio languages" can be used to control which audio
language shall be selected in case a channel broadcasts in different languages
(see MANUAL for details).
- The "Left" and "Right" keys in the "Audio" menu can be used to switch between
the left and right stereo channels in case there are different audio tracks
in these channels (see MANUAL for details).
- Fixed a possible race condition in cDevice::Action() (thanks to Mattias Grönlund).
- Fixed the default quality value when grabbing a JPEG image (thanks to Patrick
Gleichmann).
- Fixed deleting a menu item in case the next item is not selectable (thanks to
Dino Ravnic).
- Implemented displaying mandatory subtitles in the SPU decoder (thanks to Marco
Schlüßler).
- The setup option "Recording/Record Dolby Digital" has been renamed and moved to
"DVB/Use Dolby Digital". It now controls whether Dolby Digital is recorded and
whether an available DD audio track will appear in the "Audio" menu.
- Added support for circular polarization (thanks to Jonan Santiago).
- Thanks to Werner Fink, Reinhard Nissl, Sascha Volkenandt and Bjørnar Nilsen for
their support in testing and fine tuning this version.
|
|
- Fixed some typos in the Makefile's 'font' target (thanks to Uwe Hanke).
- Added more checks and polling when getting frontend events (based on a patch
from Werner Fink).
- No longer explicitly waiting for a tuner lock when switching channels
(apparently setting "live" PIDs before the tuner is locked doesn't hurt).
Moved the wait into cDevice::AttachReceiver() instead.
- Immediately displaying the new channel info when switching channel groups.
- Moved the main program loop variables further up to allow compilation with
older compiler versions (thanks to Marco Schlüßler for reporting this one).
- Now calling pthread_cond_broadcast() in the destructor of cCondWait and
cCondVar to make sure any sleepers will wake up (suggested by Werner Fink).
Also using pthread_cond_broadcast() instead of pthread_cond_signal() in
cCondWait, in case there is more than one sleeper.
- Making sure that timers and channels are only saved together, in a consistent
manner (thanks to Mirko Dölle for reporting a problem with inconsistent
channel and timer lists).
- Now handling the channel name, short name and provider separately. cChannel
therefore has two new functions, ShortName() and Provider(). ShortName()
can be used to display a short version of the name (in case such a version
is available). The optional boolean parameter of ShortName() can be set to
true to make it return the name, if no short name is available.
The sequence of 'name' and 'short name' in the channels.conf file has been
swapped (see man vdr(5)).
- Added the 'portal name' to cChannels (thanks to Marco Schlüßler).
- Fixed handling key codes that start with 0x1B in the KBD remote control code.
- Now using qsort() to sort cListBase lists. For this, the virtual function
cListObject::operator<() has been replaced with cListObject::Compare().
Plugins that implement derived cListObject classes may need to adjust their
code.
- The "Channels" menu can now be sorted "by number" (default), "by name" and
"by provider". While in the "Channels" menu, pressing the '0' key switches
through these modes.
- Fixed the buffer size in cRecording::SortName().
- Now displaying the name of the remote control for which the keys are being
learned inside the menu to avoid overwriting the date/time in the 'classic'
skin (thanks to Oliver Endriss for reporting this one).
|
|
- Removed all error messages from cRecordings::ScanVideoDir() and just skipping
entries that cause errors in order to avoid failure in case of things like
broken links etc.
- The function cTimers::SetEvents() now immediately returns if there is some user
input.
- Fixed handling menu status messages when the list contents is scrolled (thanks to
Alfred Zastrow for reporting this one).
- Fixed checking the last area for misalignment in cOsd::CanHandleAreas() (thanks
to Reinhard Nissl for reporting this one).
- No longer adding section filters to the list of filters if they can't be opened
(thanks to Marco Schlüßler for pointing this out).
- Fixed handling error case '-1' when polling section filters (thanks to Marco
Schlüßler).
- Fixed handling error case '-1' when polling CAM connections.
- Making sure the OSD reports oeWrongAlignment errors before any oeAreasOverlap
error (suggested by Reinhard Nissl).
- Avoiding flashing effects in the OSD of full featured DVB cards by explicitly
clearing the OSD windows before opening them (suggested by Marco Schlüßler).
- Experimental support for NVOD channels. Currently these channels are detected
and linked to their "base" channels using the same mechanisms as for the
"linked services" (let's see if this is useful). Thanks to Mike parker for
helping to test this. Also used some input from the 'autopid' patch by Andreas
Schultz).
- Now storing the name of the service provider (aka "bouquet") in the channel
name, separated by a semicolon (see man vdr(5) for details). Explicit usage
of the various parts of the channel name is yet to come.
- The 'radio' channel icon is now only displayed in the ST:TNG skin if the channel
actually has an APID.
|
|
- In order to avoid problems on NPTL systems, VDR now checks for the presence
of NPTL at program start, and if it is, exits and tells the user to do
'export LD_ASSUME_KERNEL=2.4.1' before starting VDR.
- Revisited the "Fixed missing audio after replaying a DVD" change because it
introduced a sound disturbance when switching between channels on the same
transponder (thanks to Marco Schlüßler).
- In order to avoid problems on UTF-8 systems, VDR now checks for the presence
of UTF-8 at program start, and if it is, exits and tells the user to turn off
UTF-8 before starting VDR (thanks to Ludwig Nussel for pointing out a problem
with systems that are set to use UTF-8). There are also problems in case the
video partition is mounted with "iocharset=utf8" (thanks to Jörg Knitter for
reporting this one).
Please also read the "IMPORTANT NOTES" section in the INSTALL file!
- Some changes to the SPU decoder interface (thanks to Sven Goethel).
- Some improvements in cOsd creation (thanks to some suggestions by Jouni Karvo).
- Fixed calculating the OSD width and height (thanks to Olaf Henkel for reporting
a problem with long event texts in the "Classic VDR" skin).
- Fixed switching channels while an encrypted channel is being recorded, because the
channel was switched if the new channel was on the same transponder and was
a radio channel or an unencrypted channel (thanks to Martin Dauskardt for reporting
this one).
- No longer using the external 'find' command to scan the video directory for
recordings (based on a suggestion by Mirko Dölle).
- The list of recordings is now kept statically in memory to avoid long delays
when opening the "Recordings" menu. As a side effect, external modifications to
the video directory are no longer immediately reflected in the "Recordings" menu.
If a plugin manipulates the video directory in any way, it can call the function
Recordings.TriggerUpdate() to trigger an update of the list of recordings.
If some external tool manipulates the video directory, it can touch the file
'.update' in the video directory to trigger an update of the list of recordings.
- Fixed a memory leak in theme description handling (thanks to Sascha Volkenandt).
- Added cDevice::Flush() to make sure that all data in the video card's buffers
has been processed (thanks to Reinhard Nissl). Currently this is not yet actually
implemented for FF DVB cards.
- Fixed handling the color button texts in cMenuEditStrItem (thanks to Maynard
Cedric for reporting this one).
- Fixed the description of cRingBufferLinear (thanks to Ludwig Nussel for pointing
out this one).
- Fixed cRingBufferLinear::Get() in case the buffer wraps around (thanks to Ludwig
Nussel for reporting this one).
|
|
- Fixed a memory leak in thread handling when using NPTL (thanks to Jon Burgess).
- Fixed handling Setup.RecordDolbyDigital, which was broken since version 1.1.6.
- Fixed handling text lengths for itemized EPG texts (thanks to Marcel Wiesweg).
- Fixed the help for LSTE and LSTR (was broken in 1.3.6).
- Improved iso8859-7 fonts (thanks to Dimitrios Dimitrakos).
- Added some 3-letter language codes (thanks to Marcus Mönnig).
- Added language code handling to the subtitling descriptor in 'libsi' (thanks to
Pekka Virtanen).
- Moved several menu item classes from menu.c to menuitems.[hc] to make them
available for plugins.
- The epg2html.pl script now handles '|' in description texts.
- The new setup option "OSD/Use small font" can be used to control the use of
the small font (see MANUAL for details).
- Swapped osd.[hc] and osdbase.[hc] to have the virtual OSD base class named cOsd.
Plugins may need to adjust their #include statements.
- Colors are now given as AARRGGBB instead of AABBGGRR. The values are mapped to
the driver's (wrong) sequence in dvbosd.c (this should really be fixed in the
driver, together with the endian problem).
- The new OSD setup parameters "Left" and "Top" can be used to define the top left
corner of the OSD.
- The OSD size parameters are now in pixel (as opposed to formerly characters).
When reading a 'setup.conf' file from an older version of VDR, the OSDwidth
and OSDheight values will be converted to pixel automatically.
- The OSD is now fully device independent. See the comments in VDR/osd.h and the
description in PLUGINS.html for information on how a plugin can implement an OSD
display on arbitrary hardware.
- The OSD (actually its cBitmap class) can now handle XPM files. There are several
XPM files in the VDR/symbols directory which can be used by skins (some of these
have been taken from the "elchi" patch). See VDR/skinsttng.c for examples on how
to use these.
- Due to the changes in the OSD handling the DEBUG_OSD option for a textual OSD
has been dropped. There will be a plugin that implements a skin with this
functionality later.
- The entire OSD display can now be implemented via "skins". See VDR/skins.[hc],
VDR/skinclassic.[hc], VDR/skinsttng.[hc] and PLUGINS.html for information on how
a plugin can implement its own skin. By default VDR comes with a "Classic" skin
that implements the OSD display known from previous versions, and the new skin
named "ST:TNG Panels", which is also the default skin now. The actual skin can
be selected through "Setup/OSD/Skin".
- The colors used in a skin can now be configured using "themes". See PLUGINS.html
for information on how a skin can make use of themes, and man vdr(5) for the
structure of a theme file. The actual theme to use can be selected through
"Setup/OSD/Theme".
- Added Croatian language texts (thanks to Drazen Dupor).
NOTE: there is apparently a problem with the newly introduced iso8859-2 font,
because as soon as Setup/OSD/Language is set to Croatian (currently the last one
in the list) everything freezes and the vdr processes have to be killed with -9
and the driver needs to be reloaded. Maybe somebody else can find out what's
going wrong here...
- Added missing NULL checks when accessing sectionHandler in device.c (thanks to
Pekka Virtanen).
- Fixed setting the time from the DVB data stream (thanks to Helmut Auer for
pointing out a frequency/transponder handling mixup). This now also takes the
actual source (sat, cable etc.) into account. Please go into "Setup/EPG" and
set the "Set system time" and "Use time from transponder" parameters accordingly
(this is necessary even if you have already set them before!).
|
|
- Added cDevice::GetSTC() (suggested by Sven Goethel).
- Added Asia-Pacific satellites to 'sources.conf' (thanks to Richard Scobie).
- Added North American satellites to 'sources.conf' (thanks to Luke Jenkins).
- Fixed getting the list of recordings in case VDR is started from a directory
where it doesn't have access to (thanks to Dirk Mueller).
|
|
- Improved cDvbDevice::StillPicture() (thanks to Oliver Endriss).
- Continuing learning remote control keys in case one rc fails (thanks to
Oliver Endriss).
- Fixed handling comments in editing marks.
|
|
- Updated the required driver version in INSTALL (thanks to Jens Groth for
reporting this one).
- Fixed missing channel info after an incomplete channel group switch (thanks
to Andreas Trauer).
- Fixed handling a channels.conf that contains a ":@nnn" line as its last entry
(thanks to Ralf Klueber).
- Fixed detecting the /dev/videoN devices for GRAB in case there are others
before the DVB devices (thanks to Andreas Kool).
- Updated 'channels.conf.terr' for Berlin (thanks to Markus Hardt).
- Fixed handling rc key learning in case cRemote::Initialize() returns 'false'
(thanks to Oliver Endriss).
- Fixed initializing the highlight area in cDvbSpuDecoder (thanks to Sven Goethel).
- Now trying to get a timer's channel without RID when loading 'timers.conf'
(thanks to Thomas Rausch).
- Removed the unused 0x73 (TOT) filter in eit.c (thanks to Andreas Trauer).
- Fixed extracting the ES data in cDvbDevice::StillPicture() (thanks to Stefan
Huelswitt).
- Added MPEG1 handling to cDvbDevice::StillPicture() (thanks to Thomas
Heiligenmann).
- Changed the default "Lifetime" to 99, which means that recordings will
never be deleted automatically in case the disk runs full (suggested by
Oliver Endriss). Note that in an existing VDR installation the current
value as set in 'setup.conf' will still be used - this change only affects
new VDR installations.
- Edited recordings will now never be deleted automatically if the disk runs
full (suggested by Emil Naepflein).
- Channel IDs are now checked when reading 'channels.conf' to avoid later
problems with timers.
|
|
- Fixed dropping out of replay mode while viewing a recording that is still
going on (thanks to Oliver Endriss for reporting and helping to debug this
one).
- Fixed handling ':' characters in channel names when reading channels.conf
(thanks to Reinhard Nissl for reporting this one).
- Fixed the URL to the 'Doxygen' tool in INSTALL (thanks to Dirk Essl).
- Removed the obsolete chapter "Stopping a recording on the primary DVB interface"
from MANUAL.
- Completed Dutch language texts (thanks to Hans Dingemans).
- Made 'diseqc.conf' a required file only if Setup.DiSEqC is activated (thanks to
Thomas Schmidt).
- VDR now starts up even if 'keymacros.conf' references a plugin that is currently
not loaded (suggested by Alexander Wetzel).
- Fixed checking for VIDEO_STREAM_S in cRemux::SetBrokenLink() (thanks to Oliver
Endriss).
- Added 'repeat' function to keys '7' and '9' ("jump to mark") in replay mode
(suggested by Oliver Endriss).
- Made cOsdMenu::Display() virtual, which allows plugins to do some additional
processing after calling the base class function (suggested by Jan Rieger).
- Updated 'ca.conf' (thanks to Marco Franceschetti).
|
|
- Fixed the TS to PES repacker so that it works with MPEG1 streams (thanks to
Andreas Kool).
- Fixed keeping track of the current channel number when moving channels in
the "Channels" menu (thanks to Mirko Günther for reporting this one).
- Made the plugin library directory configurable via Make.config (thanks to
Ludwig Nussel).
- Fixed scaling SPU bitmaps in Letterbox mode when playing NTSC material.
In order to do this, the cDevice was given a new member function GetVideoSystem().
- Fixed two warnings when compiling with gcc 3.3.1 (thanks to Alfred Zastrow for
reporting this).
- Made crc32() a static function in libdtv/libsi/si_parser.c to avoid a name clash
when using other libraries that also implement a function by that name (thanks
to Reinhard Nissl for reporting this one).
- Fixed staying off the end of an ongoing recording while replaying in time shift
mode (thanks to Rainer Zocholl for reporting this one).
- VDR now stops with exit status 2 if one of the configuration files can't be
read correctly at program startup (suggested by Rainer Zocholl).
- Fixed a crash when starting "Pause live video" twice within the same minute on
the same channel.
- Fixed freezing replay if a timer starts while in Transfer Mode from the device
used by the timer, and the timer needs a different transponder (thanks to
Richard Robson for reporting this one).
- Fixed toggling channels with the '0' key (thanks to Mirko Günther for reporting
this one).
- Made the "Zap timeout" (the time until a channel counts as "previous" for
switching with '0') a setup variable, available in "Setup/Miscellaneous"
(suggested by Helmut Auer).
- Removing deleted recordings faster than normal when cutting, to avoid running
out of disk space (thanks to Manfred Schmidt-Voigt for reporting this one).
|
|
- Some corrections to the French OSD texts (thanks to Olivier Jacques).
- Fixed some missing commas in i18n.c (thanks to Dimitrios Dimitrakos for
reporting this problem).
- Some corrections to the Finnish OSD texts (thanks to Niko Tarnanen and Rolf
Ahrenberg).
- Completed the Italian OSD texts (thanks to Antonio Ospite).
- Fixed breaking off replay in case the user hits "Play" or "Pause" too soon after
going into "Pause live video" mode (thanks to Karim Afifi for reporting ths one).
- Some corrections to the Catalanian OSD texts (thanks to Jordi Vilà ).
- Single event timers are now deleted if the recording they are doing is
deleted before the timer ends.
- Fixed an uninitialized variable in cDisplayChannel (thanks to Stefan Huelswitt).
- Fixed a possible access of invalid file handles in cSIProcessor::Action()
(thanks to Stefan Huelswitt).
|
|
- Modified handling of audio packets in cDvbPlayer for better sync with external
AC3 replay (thanks to Werner Fink).
- Fixed a memory leak in cNonBlockingFileReader (thanks to Stefan Huelswitt).
- Completed the French OSD texts (thanks to Gregoire Favre).
- Completed the Finnish OSD texts (thanks to Niko Tarnanen and Rolf Ahrenberg).
- Fixed I/O handling in case an explicit controlling terminal is given (thanks
to Oliver Endriss).
- Fixed resume file handling in case the resume.vdr file can't be written
(thanks to Gerhard Steiner).
- Fixed cutting a recording if there is only a single editing mark (thanks to
Ralf Klueber for reporting this one).
- Fixed volume display in case a plugin has its own OSD open (thanks to Marcel
Wiesweg).
- Fixed channel switching in the EPG scanner on single device systems.
- Completed the Swedish OSD texts (thanks to Tomas Prybil).
- Now switching to the channel used by the most recently started timer in case
the original current channel becomes unavailable due to a recording on a
different transponder. If this fails, a channel up/down switch is attempted as
a fallback solution (thanks to Lauri Tischler for reporting this one, and to
Hermann Gausterer for suggesting to switch to the recording channel).
- Fixed cReplayControl::Show() to avoid a compiler warning in g++ 3.2.3 (thanks
to Jan Ekholm for reporting this one).
- Completed the Slovenian OSD texts (thanks to Matjaz Thaler).
- Changed the DEFAULTPRIORITY in device.c to -1, so that the primary device
will be used for FTA recordings in case the CAM is connected to a non-primary
device (thanks to Reinhard Walter Buchner for reporting this one).
- The cCiHandler now closes its file handle when it gets destroyed.
- Checking for duplicate recordings with the same file name and disabling the
second timer (thanks to Peter Bieringer for reporting this one).
- Fixed handling newly created timers in case they are not confirmed with "Ok"
(thanks to Gerhard Steiner for reporting this one).
- It is now possible to directly delete a timer that is currently recording
(thanks to Alexander Damhuis for reporting this one).
|
|
- Removed a faulty parameter initialization in menu.c (thanks to Lauri Tischler for
reporting this one).
- Re-implemented the WaitForPut/WaitForGet stuff in cRingBuffer, since some plugins
actually need this. By default the buffer does not wait; if a plugin needs the
waiting functionality it can call the new SetTimeouts() function.
- Moved the call to cPlugin::Start() further up in vdr.c, to make sure it gets
called before trying to learn the keys (problem reported by Oliver Endriss).
- No longer starting the editing process if no marks have been set (thanks to
Matthias Raus for reporting this one).
- Added Catalanian language texts (thanks to Marc Rovira Vall and Ramon Roca).
Plugin authors may want to add the new entries to their I18N texts and contact
the translators to have their texts translated. Note that there are now 16
different OSD languages, so please make sure you have 16 versions for each of
your texts.
- Moved the detection of a broken video data stream from the cDevice into the
cRecorder to avoid problems with cReceivers that want to receive from PIDs
that are currently not transmitting (thanks to Marcel Wiesweg for reporting
this one).
- Fixed setting the locking pid after a timed wait (thanks to Andreas Schultz).
- Avoiding spurious section filter settings after a channel switch.
- Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt).
- Fixed reading 'epg.data' for channels with non-zero RID (thanks to Oliver
Endriss for reporting this one).
- Fixed EPG bugfix statistics to avoid log entires for undefined channels (thanks
to Lars Bläser for reporting this one).
- No longer waiting inside cIndexFile::CatchUp() to avoid shortly blocking replay
at the end of a recording.
|
|
- Introduced the new function cPlugin::Initialize(), in order to be able to separate
the startup of a plugin into an "early" (Initialize()) and "late" (Start()) phase
(suggested by Andreas Schultz). Plugin authors should please read the section
about "Getting started" in PLUGINS.html and adapt their code if applicable.
- Implemented the CableDeliverySystemDescriptor and TerrestrialDeliverySystemDescriptor
in libdtv (thanks to Sven Grothklags and Andreas Schultz).
- Fixed keeping live video active in case the primary device doesn't have an MPEG
decoder (thanks to Wolfgang Goeller for reporting this one).
- Implemented cDevice::ActualDevice(), which returns the actual receiving device in
case of 'Transfer Mode', or the primary device otherwise. This may be useful for
plugins that want to attach a cReceiver to the device where the current live video
is actually coming from.
- Added VDRVERSNUM to config.h, which can be used by the preprocessor to check the
actual VDR version (suggested by Stefan Huelswitt).
- Removed the WaitForPut/WaitForGet stuff from cRingBuffer, since it appears to
no longer be necessary due to the implementation of cNonBlockingFileReader in
dvbplayer.c. Also, the long timeout in WaitForPut caused problems with cReceivers
that use a ring buffer and didn't immediately return from their Receive() function
if the buffer runs full (thanks to Sascha Volkenandt for reporting this one).
- Fixed handling EPG data where the "extended event descriptor" comes before the
"short event" or a "time shifted event" (thanks to Jonan Santiago).
- Disabled the "Received stuffing section in EIT" log message.
- Updated 'channels.conf.terr' for Berlin (thanks to Juri Haberland).
- Avoiding short display of the "Main" menu when pressing the "Recordings" button
or the "Back" button during replay.
- Further increased the timeout until an index file is considerd no longer to be
written.
- Implemented separate PausePriority and PauseLifetime parameters for the recordings
created when pausing live video (suggested by Alfred Zastrow).
- Changed C++ style comments in libdtv into C style to avoid warnings in gcc 3.x
(thanks to Andreas Schultz).
|
|
- Fixed minimum lifespan of deleted recordings (thanks to Jaakko Hyvätti).
- Updated French OSD texts (thanks to Olivier Jacques).
- Fixed paging through lists with repeated Left/Right keys.
- Fixed setting the PCR-PID in case it is equal to one of the other PIDs (thanks
to Oliver Endriss for reporting this one).
- Fixed double call to MainMenuAction() of a plugin if invoked via a hotkey (thanks
to Kai Moeller for reporting this one).
- Fixed handling dedicated keys.
- Now turning off live PIDs when replaying. This avoids short spikes from other
channels when switching between Transfer Mode channels, and also lets an ongoing
replay continue even if a recording is started on the primary device.
- The RCU channel display no longer changes when a recording on a different
channel starts on the primary device.
- Restoring the current channel in case a recording has switched the transponder.
If all devices are busy and none of them can provide the current channel, the
message "Channel not available!" will be displayed.
- Removed the (no longer necessary) 'panic' stuff from cThread.
- Added cStatus::OsdItem() to provide the entire list of menu items to a plugin
(thanks to Carsten Siebholz).
- The red ("Record") and yellow ("Pause") button in the "Main" menu are no longer
available when replaying.
|
|
- The CAM is now accessed only if the current channel actually has a non-zero Ca
value, and CAM access is completely suppressed during replay, which avoids
problems in case the CAM is attached to the primary DVB device.
- The "Left" and "Right" buttons now set the cursor to the first or last list item
even if the list consist only of a single page, like, for instance, the Main menu
(thanks to Oliver Endriss).
- Made the log message "OSD window width must be a multiple of 4..." a debug message
instead of an error message, so it can be avoided by using a log level less than 3.
- Updated Greek language texts (thanks to Dimitrios Dimitrakos).
- Fixed faulty behaviour of the "Mute" key in case the channel display is visible
(thanks to Florian Bartels for reporting this one and Sascha Volkenandt for
helping to fix it).
- Modified LOF handling to allow for C-band reception (thanks to Malcolm Caldwell).
- Added some missing cAudio handling calls (thanks to Werner Fink).
- Replaced the 'for' loops in StripAudioPackets() with memset() calls (thanks to
Werner Fink).
- Further increased the timeout until an index file is considerd no longer to be
written.
- Fixed a crash in case the index file can't be accessed any more during replay
(thanks to Stefan Huelswitt for reporting this one).
- Fixed displaying messages in the status line in case they exceed the OSD width
(thanks to Gerhard Steiner for reporting this one).
- Avoiding high CPU load in case the connection to LIRC gets lost (thanks to
Ludwig Nussel).
- Fixed handling repeat function with LIRC (thanks to Ludwig Nussel).
- Fixed handling min/max borders when entering integer values (thanks to Andy
Grobb for reporting this one).
- Implemented a "resume ID" which allows several users to each have their own
resume.vdr files (thanks to Martin Hammerschmid). This parameter can be set in
the "Setup/Replay" menu (see MANUAL for details).
- Now using 'libdtv' version 0.0.5 (thanks to Rolf Hakenes for the new version
and Stefan Huelswitt for adapting VDR to it).
- If no device with an MPEG decoder can be found at startup, the first device
is now used as primary device (just to have some device).
- Adjusted some Premiere channels in 'channels.conf' (thanks to Thomas Koch).
- Updated 'channels.conf.cable' (thanks to Stefan Hußfeldt).
- The 'epg.data' file is now read after all plugins have been started (thanks
to Sascha Volkenandt).
- The LIRC remote control no longer tries to learn keys if it can't connect to
the LIRC daemon (thanks to Ludwig Nussel for reporting this one). The same
applies to the RCU remote control in case of errors during startup.
- Fixed handling of Ca parameters with values <= MAXDEVICES, which don't indicate
an actual encrypted channel (thanks to Stefan Huelswitt for reporting this one).
|
|
- Fixed the 'channels.conf' entries for "Studio Universal" and "Disney Channel".
- Fixed handling channels in the "Channels" menu in case there are ':@nnn' group
separators without names (thanks to Guy Roussin for reporting this one).
- The SVDRP command CHAN now also accepts channel IDs.
- Increased the timeout until an index file is considerd no longer to be written
(sometimes in time shift with heavy system load the index file was closed too
early by the replay thread).
- Implemented "Link Layer" based CAM support, which hopefully will solve the
problems with CAMs we had in the past. To use this you need the driver version
2002-01-08 or higher (with the new firmware supporting the "Link Layer" protocol).
- Added an EPG bugfix that moves the Subtitle data to the Extended Description in
case the latter is empty and the Subtitle exceeds some useful length.
- Since several channels put very long strings into the Subtitle part of their
EPG data, that string is now limited in length when used in a recording's
file name.
|
|
- Fixed some faulty default parameter initializations (thanks to Robert Schiele).
- Added further satellites to 'sources.conf' (thanks to Reinhard Walter Buchner
and Oliver Endriss).
- Updated Finnish OSD texts (thanks to Jaakko Hyvätti).
- Fixed a small glitch when switching channels (thanks to Dennis Noordsij for
reporting this one).
- Fixed handling multiple 'CaCaps' entries in 'setup.conf'.
- Group separators in 'channels.conf' may now be given like ':@201 My Channels',
where '@201' indicates the number to be given to the next channel. This can be
used to create 'gaps' in the channel numbering (see 'man 5 vdr'). BE CAREFUL
TO UPDATE YOUR 'timers.conf' ACCORDINGLY IF INSERTING THIS NEW FEATURE INTO YOUR
'channels.conf' FILE!
- Timers now internally have a pointer to their channel (this is necessary to
handle gaps in channel numbers, and in preparation for unique channel ids).
- Fixed slow reaction on SVDRP input (thanks to Guido Fiala for reporting this one).
- Added KI.KA to channels.conf.cable (thanks to Robert Schiele).
- Frequency values for cable and terrestrial channels in 'channels.conf' can
now be given either in MHz, kHz or Hz. The actual value given will be multiplied
by 1000 until it is larger than 1000000.
- Fixed skipping unavailable channels when zapping downwards.
- Fixed checking the Ca() status of a cDevice (thanks to Stefan Huelswitt).
- Fixed switching audio tracks in 'Transfer Mode' on the primary DVB device
(thanks to Steffen Barszus and Stefan Huelswitt for reporting this one and
helping to fix it).
- Fixed channel switching in case of an active 'Transfer Mode' on the primary
device ('Transfer Mode' is now launched with priority '-1').
- Fixed a ternary expression in dvbspu.c.
- Fixed handling 'Transfer Mode' on single device systems when recording an
encrypted channel (thanks to Stefan Huelswitt).
- Fixed blocking replaying in case an encrypted channel is being recorded on
the primary device.
- Now the name of the remote control is displayed when learning the keys.
- Fixed learning remote control keys in case there is more than one remote
control (thanks to Oliver Endriss for reporting this one).
- Implemented additional dedicated keys for "Play", "Pause", "Stop", "Record",
"FastFwd", "FastRew", "Channel+" and "Channel-". If your remote control supports
any of these keys you can delete your 'remote.conf' file and restart VDR to
go through the key learning procedure again in order to assign these new keys.
See MANUAL for more information.
Authors of player plugins should update their ProcessKey() functions so that
the new player keys have the same functionality as the "Up", "Down", "Left",
"Right" and "Blue" keys, respectively. Note that the existing functionality
of these keys should by all means be retained, since VDR (and any plugins)
shall be fully usable with just the basic set of keys. These new keys are only
for additional comfort in case the remote control in use supports them.
- Implemented new keys to directly access the VDR main menu functions "Schedule",
"Channels", "Timers", "Recordings", "Setup" and "Commands". If your remote
control provides keys you want to assign these functions to, you can delete
your 'remote.cof' file and restart VDR to go through the key learning procedure
again in order to assign these new keys. See MANUAL for more information.
- The new configuration file 'keymacros.conf' can be used to assign macros to
the color buttons in normal viewing mode, as well as to up to 9 user defined
keys. See MANUAL and man vdr(5) for more information. The default 'keymacros.conf'
implements the functionality of the "color button patch".
- Fixed a crash when learning the keys of several remote controls and pressing
buttons of those that have already been learned (thanks to Oliver Endriss for
reporting this one).
|
|
- Added cDevice::DeviceNumber() to get the number of a device, not counting any
gaps that might be in the index count.
- Fixed fetching the current/next information to handle cases where the duration
of an event is set wrongly and would last beyond the start time of the next
event.
- Adapted type names to the new HEAD version of the driver (which the previous
NEWSTRUCT branch has been merged into). Note that to use this driver version
you still need to add NEWSTRUCT=1 to the make call when building VDR. You
need a HEAD version of the LinuxDVB driver dated 2002-10-11 or later to compile
VDR with NEWSTRUCT=1.
- Fixed radio channels in channels.conf.cable (thanks to Robert Schiele and Uwe
Scheffler).
- Fixed switching the video format in the Setup/DVB menu (thanks to Uwe Scheffler
for reporting this one).
- Reactivated full handling of second audio PID (even in 'Transfer Mode').
- Fixed a crash when closing down with remote control plugins (thanks to Oliver
Endriss helping to debug this one).
- Commands in the file 'commands.conf' can now have a '?' at the end of their
title, which will result in a confirmation prompt before executing the
command.
- Changed a few leftover 'new char[...]' to MALLOC(char, ...).
- If a command executed from the "Commands" menu doesn't return any output, the
OSD will now be closed automatically.
- The SVDRP command PUTE now triggers an immediate write of the 'epg.data' file
(suggested by Gerhard Steiner).
- The new configuration file 'reccmds.conf' can be used to define commands that
shall be executed from the "Recordings" menu; see MANUAL and 'man vdr(5)' for
details (suggested by Gerhard Steiner).
|
|
- Fixed a missing Flush() call in the remote control learning procedure (thanks
to Oliver Endriss).
- Modified channel handling to cover all parameters necessary for DVB-C and DVB-T
(see man vdr(5) for the meaning of the additional parameters stored in the field
previously named 'polarisation'). Thanks to Uwe Scheffler and Andy Carter for testing.
If you have a system with different kinds of DVB cards, like DVB-T and DVB-C,
for instance, there is no more need to distinguish the channels through the
'Ca' parameter in order to assign them to the various DVB cards. This is now
taken care of by the "source" parameter. So a channel marked as "terrestrial",
for example, will only be received on DVB-T cards.
Note that the cChannel class has been moved into a separate file (channels.[ch]),
and that all data members have been made private and are now only accessible
through member functions. You may have to change any plugin code that accesses
cChannel data accordingly.
- The new configuration file 'sources.conf' contains the various signal sources
(satellites, cable and terrestrial) which are used in 'channels.conf' and
'diseqc.conf' (thanks to Reinhard Walter Buchner for adding some satellites to
'sources.conf' and Oliver Endriss and Lauri Tischler for testing and debugging).
- The 'diseqc' parameter in the channel definitions has been redefined to hold the
"source" of the given channel (which can be either a satellite, cable or terrestrial).
For compatibility with channels.conf files from older versions, numeric values in
this parameter will be tolerated, but they have no meaning. If you want to use
DiSEqC you will need to replace these old values with the proper source identifiers
defined in the new configuration file 'sources.conf'. See how this is done in the
'channels.conf' file that comes with the VDR package.
- The new configuration file 'diseqc.conf' can be used to set up the individual
diseqc configuration (see man vdr(5) for a description of the file format).
- The "Edit channel" menu has a new entry "Source:" in which the source of this
channel can be selected (either a satellite, cable or terrestrial). The set of
parameters at the end of this menu will change according to the type of source.
- The "Use DiSEqC" parameter in the "Setup/LNB" menu has been moved to the beginning
of the list and disables the rest of the parameters when set to "yes", since these
are now only meaningful if DiSEqC is _not_ used.
- Removed some unnecessary #includes from eit.c and changed cMenuRecordings::Del()
to cMenuRecordings::Delete() to avoid warnings in gcc-3.2 (thanks to Andreas
Schultz for pointing this out).
- Improved skipping channels that are (currently) not available (thanks to Stefan
Huelswitt).
- Updated channels.conf.terr and channels.conf.cable (thanks to Uwe Scheffler).
- Fixed a bug when pressing the "Blue" button in the main menu without having
displayed it (thanks to Oliver Endriss for reporting this one).
|
|
- Fixed replaying the last few seconds of a recording.
- Added some missing #includes to files in libdtv for gcc 3.2 (thanks to Jürgen
Zimmermann).
- Added cDevice::NewOsd() to allow a derived cDevice class to implement its own
OSD capabilities (thanks to Andreas Schultz).
- Added cPalette::AllColors() for plugins that need to get the color entries of
a cPalette (see osdbase.h).
- The new SVDRP command CLRE can be used to clear the entire EPG data (suggested
by Matthias Schniedermeyer).
- Fixed handling one-shot timers that were already recording and had their start
time changed into the future (thanks to Matthias Schniedermeyer for reporting
this one).
|
|
- Adapted VDR to the NEWSTRUCT driver. To use the new driver, compile VDR with
'make NEWSTRUCT=1' (thanks to Holger Wächtler for some valuable advice).
By default it currently still uses the old driver.
- Added some missing #includes (thanks to Martin Hammerschmid).
- Changed the log error message "can't record MPEG1!" to "error in data stream!",
since the mentioning of MPEG1 has irritated many people.
- Consistently using malloc/free and new/delete (thanks to Andreas Schultz).
- Temporarily made cDevice::ProvidesCa() virtual (Andreas Schultz needs this
in his DXR3 plugin).
- cDevice no longer exposes a file handle to cPlayer. A derived cPlayer class
can now call DevicePoll() to see whether the replay device is ready for
further data. A derived cDevice class must implement Poll() and shall
check if any of its file handles is ready for data.
- Implemented several replay modes to allow players that play only audio (thanks
to Stefan Huelswitt).
- Improved cCondVar::Wait() and implemented cCondVar::TimedWait() (thanks to
Stefan Huelswitt).
- VDR no longer gives up if there is no DVB device. It continues to work if
there is at least one device, either a DVB device found by the core VDR code
itself, or a device implemented by a plugin.
|
|
- Re-visited the race condition fix in the cDvbPlayer (thanks again to Andreas
Schultz).
- Changed the VFAT handling to allow users who normally use it but have forgotten
to set it when compiling a new version of VDR to at least see their recordings
made with VFAT enabled (thanks to Christian Rienecker).
- Added some missing teletext PIDs (thanks to Joerg Riechardt).
- Fixed PID handling for cReceiver.
- Added a missing #include to ringbuffer.c (thanks to Martin Hammerschmid).
- Now using CC, CFLAGS, CXX and CXXFLAGS in Makefile.
- Changed the cDevice class to allow plugins to implement their own devices (see
PLUGINS.html for details).
|
|
- Added Hungarian language texts (thanks to Istvan Koenigsberger and Guido Josten).
- Activated cutting.
- Activated 'Transfer Mode'.
- Moved handling of the Menu key entirely into vdr.c.
- Switched VDR's own player to the new cPlayer/cControl structures.
- Switched handling 'Transfer Mode' to the new cPlayer/cControl structures.
- The following limitations apply to this version:
+ The '-a' option (for Dolby Digital audio) doesn't work yet.
+ Switching between different language tracks doesn't work yet.
|
|
- Improved the VDR Makefile to avoid a warning if the '.dependencies' file does
not exist, and also using $(MAKE) to call recursive makes.
- Changed the name of the 'package' target in the plugin Makefiles to 'dist'
(following the suggestions in the "GNU Make" manual). If you already have started
a plugin project, you may want to change this in your Makefile accordingly.
- Improved the plugin Makefile to avoid a warning if the '.dependencies' file does
not exist, and also using $(shell...) to get the version numbers. If you already have
started a plugin project, you may want to change this in your Makefile accordingly.
- Fixed some function headers to make them compile with gcc 3.x (thanks to
Gregoire Favre).
- Fixed the cutting mechanism to make it re-sync in case a frame is larger than the
buffer (thanks to Sven Grothklags).
- Added an error message if the directory specified in the '-L' option can't be
accessed (suggested by Stefan Huelswitt).
- Rearranged OSD class names to make 'cOsd' available for the main OSD interface.
- Completely moved OSD handling out of the cDvbApi class, into the new cOsd.
- Implemented cStatus to allow plugins to set up a status monitor.
See PLUGINS.html for details.
- Moved the cEITScanner out of dvbapi.h/.c, into the new eitscan.h/.c.
- Added Swedish language texts (thanks to Tomas Prybil).
- Fixed parsing 'E' records in epg2html.pl (thanks to Matthias Fechner for pointing
out this one).
- Removed compiler option '-m486' to make it work on non-Intel platforms. If you
have already started a plugin project, you may want to make sure you remove this
option from your existing Makefile.
- Completely rearranged the recording and replay functions to make them available
to plugins.
- Replay is now done in a single thread (no more syncing between input and output
thread necessary).
- It is now possible to record several channels on the same transponder with "budget
cards". VDR automatically attaches a recording timer to a card that already
records on the appropriate transponder. How many parallel recordings can actually
be done depends on the computer's performance. Currently any number of recordings
gets attached to a card, so you should carefully plan your timers to not exceed
the limit. On a K6-II/450 it was possible to record three channels from transponder
12480 with a single WinTV NOVA-S.
- Timers that record two successive shows on the same channel may now overlap and
will use the same DVB card. During the time where both timers record the data
is simply saved to both files.
- The following limitations apply to this version:
+ Transfer mode doesn't work yet.
+ The '-a' option (for Dolby Digital audio) doesn't work yet.
+ Switching between different language tracks doesn't work yet.
+ Cutting doesn't work yet.
|
|
- Changed the cPlugin::Start() function to return a boolean value that indicates
if the plugin will not be able to perform its task (suggested by Stefan Huelswitt).
- Added the cPlugin::Housekeeping() function (suggested by Stefan Huelswitt).
- Updated channels.conf.cable (thanks to Uwe Scheffler).
- Added 'insert' capabilities to cList (suggested by Stefan Huelswitt).
- Changed the 'package' target in the plugin's Makefile to produce a package that
expands to a directory with just the plugin name and version number (suggested
by Stefan Huelswitt).
- Made the config directory available to plugins (suggested by Stefan Huelswitt).
See PLUGINS.html, section "Configuration files" for details.
- Improved the [eid]syslog() macros, so that the LOG_... macros don't need to be
given any more.
|
|
- Begin of the 1.1 development branch. THIS IS NOT A STABLE VERSION!
The current stable version for every day use is still the 1.0 branch.
- First step towards a universal plugin interface. See the file PLUGINS.html
for a detailed description. The man page vdr(1) describes the new options '-L'
and '-P' used to load plugins. This first step implements the complete "outer"
shell for plugins. The "inner" access to VDR data structures will follow.
- The VDR version number is now displayed in the title line of the "Setup" menu.
|
|
- Fixed restoring CICAM setup values for a fourth DVB card (thanks to Klaus Wolf).
- Completed internationalization of OSD texts (thanks to Hannu Savolainen,
Arnold Niessen, Paulo Lopes, Jean-Claude Repetto, Alberto Carraro, Matjaz
Thaler and Truls Slevigen).
- Improved file I/O in case of EINTR, which may occur e.g. with heavy system
load (thanks to Werner Fink).
- Now writing the title of a recording into the 'summary.vdr' file.
- Workaround for displaying still frames with the unpatched LinuxDVB driver
(if anybody ever finds out why the unpatched driver doesn't display VDR's
still frames, please let me know).
- When executing a command from the "Commands" menu, the title of that command
is now immediately shown in the status line (followed by "...") to give the
user some feedback that the command is being executed, which is especially
important if this takes some time.
- Fixed scrolling the "Channels" menu in case the cursor ends up on a group
delimiter (thanks to Bernd Zierath for helping to debug this one).
- Added manual pages vdr(1) and vdr(5) (which made the FORMATS file obsolete).
- New command command line option '-V' to display the VDR version.
- Adjusting column width for channel numbers in case there are more than 999
channels.
- Checking the return value of '...FileRady...' calls in dvbapi.c for better
performance under heavy system load.
- New 'make' target 'install', which copies the manual pages and executables
to their appropriate system locations and creates the /video directory if
it doesn't exist yet.
- Automatic hotkey assignment is now suppressed if the first entry in
commands.conf starts with a digit in the range '1'...'9', followed by a blank.
- Fixed a bug in switching back the replay mode display in time shift mode
(thanks to Achim Lange for reporting this one).
- Fixed a bug in the 'First day' timer parameter for timers that record over
midnight.
- Added units to Setup parameters.
- Changed time entry in the 'Jump' command during replay, so that it is filled
up from right to left.
- Now using statfs() to determine the amount of free disk space, which avoids
the use of an external 'df' command (thanks to Ruben Nunez Francisco).
- Fixed skipping the next hit of a repeating timer (thanks to Rainer Zocholl
for reporting this one).
- Fixed a bug when a timer records over midnight of a day that had a change in
Daylight Saving Time.
- Added Polish language texts (thanks to Michael Rakowski).
- Fixed a bug in parsing group separators in channels.conf (thanks to Henning
Holtschneider for reporting this one).
- Changed the default 'Ok' key when using the PC keyboard from '5' (in the
numeric block) to 'Enter', because the '5' key didn't work on keyboards with
the F-keys on top.
- Fixed a bug in the EPG bugfix mechanism if the extended description is shorter
than 3 characters (thanks to Andreas Schultz).
|
|
- Added 'Ca' code 201 for 'Cryptoworks, GOD-DIGITAL' to 'ca.conf' (thanks to
Bernd Schweikert).
- Fixed avoiding the primary DVB interface in case Setup.PrimaryLimit is 0.
- Fixed handling CICAM settings if the first one of a DVB card was FTA.
- Fixed reacting on changes in CICAM settings (needed to restart VDR before).
- The "Blue" button in the "Main" menu now works as "Stop" button if a recording
is currently being replayed.
- New command line option '-m' to mute audio of the primary DVB device at
startup (suggested by Mirko Günther).
- The new SVDRP command VOLU can be used to control the audio volume (suggested
by Mirko Günther).
- Fixed resetting 'mute' state when setting the volume to a non-zero value.
- Added log messages when deleting recordings in case the disk runs full while
recording.
- Fixed closing a pipe (used for replaying Dolby Digital audio), which
sometimes left 'zombie' processes behind (thanks to Werner Fink for helping
to debug this one).
- Now starting the Dolby Digital output thread only if the recording actually
contains Dolby Digital audio data (thanks to Werner Fink).
- Implemented OSD for Volume and Mute (works only if there is no other OSD
activity, but this should be no problem for normal use).
- Changed the MANUAL description of the "Conditional Access" setup parameters
to reflect the actual "CICAM DVBn m" notation in the "Setup" menu.
- The new Setup parameter "Use time from transponder" can be used to define which
transponder shall be used to set the system time (see MANUAL for details).
If you have been using the SetSystemTime option previously, you now MUST
select a channel that you trust to have a reliable time base.
- Grouped the Setup parameters into several sub-menus, so that each group of
parameters fits on a single screen - unless the height of the OSD has been
set to a small value (based on code from Markus Lang).
- Changed the title of the "Main" menu to "VDR".
- Fixed displaying a system message while the replay mode is being shown.
- Physically removing a deleted recording if one with the same name shall be
deleted again.
- The "Left" and "Right" keys are now used to page up and down in text displays
(like the EPG descriptions or the results of commands executed from the
"Commands" menu).
- Fixed high CPU usage in transfer mode.
- Replaced 'killproc' with 'killall' in 'runvdr', since apparently 'killproc'
is not available by default on some Linux distributions, whereas 'killall' is.
Please check if your system provides 'killall' - if it doesn't, please change
this back in 'runvdr' and report this (thanks to Achim Lange).
- The "Commands" menu now automatically assigns number keys as hotkeys to the
commands. If you have preceeded your commands with digits you may want to
remove these from your 'commands.conf' file.
- The new Setup item "Restart" can be used to force a complete restart of VDR,
including reloading the driver. Note that this can only work if VDR and the
driver are wrapped into a mechanism that actually performs this action if VDR
exits. The 'runvdr' script can be used for this purpose.
- Refined texts of the "Setup" menu.
|
|
- Added scanning for EPG data for another 4 days on channels that support this
(thanks to Oleg Assovski).
- Removed '#define VFAT 1' from recording.c (was a leftover from testing).
- Fixed the "Low disk space!" message (thanks to Sergei Haller).
- Added the TPID to Hessen-3 in 'channels.conf' (thanks to Sergei Haller).
- Fixed a crash when replaying with DEBUG_OSD=1 (thanks to Stefan Huelswitt).
- Implemented the "First day" parameter for repeating timers. See FORMATS for
information about the enhanced 'timers.conf' file format, and MANUAL for
a description of the new item in the "Edit Timer" menu and the enhanced
functionality of the "Blue" button in the "Timers" menu.
- When deleting a recording that is currently still being recorded, the related
timer will now automatically be terminated. If this is a repeating timer, it
will receive a "First day" setting that skips the timer for this day.
- Fixed closing all unused file descriptors when opening a pipe (thanks to
Werner Fink).
- Instant recordings now take the EPG data from the point in time at 5 minutes
from the start time of the recording. In order for this to work the 'active'
parameter of a timer now uses the second bit to indicate that this is an
"instant" recording (see FORMATS for details).
- Fixed the SVDRP GRAB command in case the video device can't be opened (thanks
to Adrian Stabiszewski).
- At startup the data written into 'epg.data' is now read into the EPG data
structures. In order for this to work, the 'E' record has been extended to
(optionally) contain the 'table ID' (see FORMATS for details).
- The new SVDRP command PUTE can be used to put EPG data into the EPG list.
See FORMATS for details about the required data format.
- Taking the German umlauts 'as is' when compiled with VFAT.
- The new Setup parameter RecordDolbyDigital can be used to generally turn off
recording the Dolby Digital audio channels in case you want to save disk space
or don't have the equipment to replay Dolby Digital audio.
- Reading the 'setup.conf' file no longer terminates in case of an error, but
rather attempts to read the rest of the file.
- Removed DVD support from the core VDR source, since the current version from
Andreas Schultz is already much further developed (DVD menu navigation) and
the concept of "additional players" in VDR is going to change in version 1.1.0,
where a new "plugin" interface shall allow the easy implementation of new
players without having to patch the core VDR source. Until then, Andreas has
agreed to provide his DVD support as a completely external patch.
- The contents of the distribution archive now contains the directory name with
the current version number, as in 'vdr-1.0.0pre1/...' in order to avoid
inadvertently overwriting an existing VDR directory with a new version.
- Added a missing error message in SVDRP command LSTC in case the given channel
can't be found.
|
|
- Fixed a bug in moving timers or channels to the last position in the list
(thanks to Matthias Schniedermeyer for helping to debug this one).
- Changed the estimated data rate for calculating the remaining disk capacity
to 25.75 MB/min.
- Only reporting the 'EPG bugfix statistics' if there really were any fixes.
- Added Finnish language texts (thanks to Hannu Savolainen).
- Reverted to the previous way of searching for the EPG record of the current
recording in case of a periodic timer (i.e. taking the one that is in the
middle between start and end time).
- Added a typedef for 'in_addr_t' to make it work with glibc < 2.2 (thanks to
Jürgen Schmidt).
- When the last entry in a "Recordings" menu page is deleted, that page is now
automatically closed (suggested by Uwe Freese).
- Changed the default name for instant recordings to "TITLE EPISODE" (avoiding
the '-').
- If Setup.ShowInfoOnChSwitch is set to "no", the box for the EPG display is no
longer shown (thanks to Andy Grobb).
- If compiled with VFAT=1, characters that can't be handled by a VFAT system are
now encoded to '#XX'.
- When the user presses the "Power" button and there is a timer about to start
recording within Setup.MinEventTimeout minutes, there is now a confirmation
prompt telling the user that there is an upcoming timer event.
- If a recording has no episode title, the trailing '~' is no longer shown in
the progress display.
|
|
- Updated channel settings for 'N24' (thanks to Andreas Gebel).
- Fixed handling hierarchical recordings menu in case of directories starting
with the same sequence of characters.
- Fixed handling timers on the 29th, 30th or 31st of a month in case the next
month has less than 31 days.
- Added a description of the sort order of individual episodes in the
recordings menu to the MANUAL.
- Removed the EPG bugfix for "Title / Subtitle" cleanup. Apparently Pro-7 has
finally stopped this nasty habit.
- Added some EPG bugfix statistics (printed to the log file every time the EPG
data is cleaned up and when VDR is terminated). Maybe somebody in charge of
the EPG data at the listed channels will read this and take the necessary
actions to fix these things...
- Changed the [dei]syslog macros in tools.h to use a variable number of args,
thus making it safe to use them in nested 'if/else' statements.
- Fixed error handling in establishing an SVDRP connection (thanks to Davide
Achilli) for pointing this out).
- The new configuration file 'svdrphosts.conf' is now used to define which
hosts may access the SVDRP port (by default only 'localhost' has access).
See FORMATS for details.
- The special keywords TITLE and EPISODE can now be used in timer file names
(see MANUAL and FORMATS for details).
- The new setup parameter NameInstantRecord can be used to define how an
instant recording will be named (see MANUAL for details).
- When looking for the EPG record of the timer that starts a recording, now
that record is taken which covers the time calculated as
'start + (Setup.MarginStart * 2) + 1)' in order to have a better chance of
hitting the right record in case of an instant recording. Timers that start
further in the future should always be programmed via the "Schedules" menu.
- The special VPIDs '0' and '1' are now used to enable recording radio channels.
Actually '0' should be enough, but '1' must be used with encrypted channels
(driver bug?). Note, though, that since VDR is mainly a *video recorder*, some
features like, e. g., the progress display, may not work as expected with
radio recordings. Thanks to Michael Paar.
- Fixed a problem with the ERR macro defined by ncurses.h (thanks to Artur
Skawina).
|
|
- Fixed setting the OSD size in the 'Confirm' interface call (thanks to
Deti Fliegl).
- Removed the 'read incomplete section...' error message in the EIT processor.
- Fixed channel data for "DW TV" (thanks to Axel Gruber).
- Added DPID to "PREMIERE MOVIE 1" in channels.conf.cable (thanks to Stephan
Schreiber).
- Prepared the OSD functions for multiple overlapping windows.
- Removed the check to see whether the system time is running linearly.
- Improved performance of SVDRP command entry.
- Removed EPGBugfixLevel '3' - after more than a year Pro-7 finally managed to
broadcast the correct timestamps for EPG events between 0:00 and 6:00!
- Fixed failing watchdog timer if program hangs in OSD activities (thanks to
Carsten Koch).
- No longer requiring 'libncurses' if compiling without DEBUG_OSD=1 and
REMOTE=KBD (thanks to Lauri Pesonen).
- The "Recordings" menu now displays a hierarchical structure if there are
subdirectories for the recordings. This can be controlled through the
"RecordingDirs" parameter in the "Setup" menu.
See "MANUAL/Replaying a Recording" for details.
- Improved speed of setting the Help button texts.
- Fixed handling file names that contain single quotes (') or dollar signs ($)
in the call to the shutdown command (option '-s') and the recording command
(option '-r').
- Improved error handling in the editing process; the resulting file will be
deleted if an error occured.
- A message is now prompted at the end of the editing process, indicating
whether the process succeeded or failed.
- Fixed setting the LastActivity timestamp after a shutdown prompt (thanks to
Sergei Haller).
- A message is now prompted if free disk space becomes low during recording.
- The editing process now calls AssertFreeDiskSpace() to remove deleted
recordings if the disk becomes full.
- The "Main" menu now displays in its title the used disk space (in percent)
and the estimated free disk space (in hh:mm), assuming a data rate of 30 MB
per minute.
- Activating the "Recordings" menu now displays "scanning recordings..." to
give the user some feedback in case this takes longer.
- Status messages are now displayed centered.
- Removed the 'Tools' subdirectory from the VDR archive. All contributed tools
can now be found at ftp://ftp.cadsoft.de/pub/people/kls/vdr/Tools.
|
|
- Implemented a lock file to prevent more than one instance of VDR from removing
files from the video directory at the same time.
- The new setup parameter SplitEditedFiles can be used to control whether or
not the result of an editing process shall be written into separate files.
- Fixed handling repeat function when using LIRC (thanks to Matthias Weingart).
- The shutdown program (defined with the '-s' option) now also gets the channel
number and recording title of the timer (see INSTALL).
- New channel data for 'Premiere One', 'Premiere X-Action', 'Fox Kids Türkce'
and 'N24' (thanks to Andreas Share, Ulrich Röder, Uwe Scheffler and Simon
Bauschulte). Note that if you are using the default 'channels.conf' or
'channels.conf.cable' files you may need to check any exiting timers to see
whether they still use the correct channel number.
- Fixed the "EPG bugfix" (sometimes had duplicate information in Subtitle and
Extended Description).
- Fixed checking for valid video device when setting the video mode.
- The external command 'sort' is no longer required. VDR now sorts the list of
recordings itself, making sure that recordings that stem from repeating timers
are sorted chronologically. Sorting is done according to the setting of the
current locale, so you may want to make sure LC_COLLATE is set to the desired
value (see INSTALL).
- Fixed handling 'newline' characters in EPG texts (thanks to Rolf Hakenes for
an improved version of his 'libdtv').
Newline characters are always mapped to a single "blank" in VDR, because they
would otherwise disturb the Title and Subtitle layout in the channel display
(where these are assumed to be single line texts) and would have to be
specially handled in the 'epg.data' file and the LSTE command in SVDRP.
- Mapping ` ("backtick") characters in EPG texts to ' (single quote).
- Fixed timers starting and ending at unexpected times. 'localtime()' was not
thread safe, now using localtime_r().
- Removed the "system time seen..." message.
- Fixed a bug in the replay mode display when pressing the Green or Yellow
button while in trick mode (thanks to Stefan Huelswitt)
- Closing all open file descriptors when calling external programs.
- The menu timeout now also works when pressing the "Back" button during replay
to enter the "Recordings" menu.
- Updated 'channels.conf' for the "Bundesliga" channels of Premiere World
(thanks to Helmut Schächner).
- Fixed reading timers.conf and channels.conf that contain blanks after numeric
values.
- Fixed handling trick modes near the beginning and end of a recording.
- Pressing the "Back" button while replaying a DVD now leads to the DVD menu.
|
|
- Made VDR compile with libdvdread-0.9.1 (thanks to Andreas Schultz).
Note that you now _need_ version 0.9.1 of libdvdread to compile VDR with
DVD support!
- Several fixes to the replay mode display (thanks to Stefan Huelswitt):
no more replay mode display when pressing the "Green" or "Yellow" button
(Skip +/-60s); fixed timeout when pressing '0' to set an editing mark while
the progress display is not shown; mode display is shown after progress
display is closed; pressing "Ok" while the mode display is on brings up
the progress display; no more unnecessary display of "normal play mode".
- Supplying the new frontend parameter 'Inversion' (currently it is always
set to INVERSION_AUTO, which should work with all channels on Astra).
- Removing unnecessary double quotes from EPG Subtitle in EPGBugfixLevel >=1.
- EPG info is now updated if the contents changes but the ID remains the same.
- Fixed handling SVDRP commands whith more than one blank between the command
word and the options.
- The current volume setting is now saved to setup.conf and restored at the
next program start.
- New command line option '-r' to define a command that gets called before and
after each recording (see INSTALL for details).
- Implemented a check to see whether the system time is running linearly.
- Writing the current time (as seen by VDR) into the log file when starting
a timer recording (this may help debugging cases where timers don't start
at the expected time).
- Made the volume, mute and power keys work when a menu is active, too (thanks
to Matthias Weingart).
|
|
- Implemented automatic shutdown (see INSTALL and MANUAL for details).
- New SVDRP command NEXT to show the next timer event.
- The new remote control key "Power" can be used to turn the VDR machine
off (this requires the presence of the '-s' option).
- Fixed code for the default "Ok" button on the PC keyboard (was 0x162 on
the "good old" keyboards (with the F-keys at the left side), while it changed
to 0x15E on the newer keyboards).
- When a recording is edited, the summary information (if present) is now
also copied.
- When a recording is running on the primary interface, any attempt to change
the current channel will now lead to a "Channel locked" message.
- The main program loop now first checks whether any timer recordings are
finished, before starting a new timer recording. This is important in case
one timer ends at the same time another timer starts.
- New setup parameter OSDMessageTime to define how long an OSD message shall
be displayed.
- The "File" parameter of a timer can now contain the '~' character to store
the recording in a hierarchical directory structure. The '~' character has
been chosen since the file system's directory delimiter '/' may be part of
a regular programme name (showing the directory hierarchy in the "Recordings"
menu will follow later).
- Repeating timers now create recordings that contain the 'Subtitle' information
from the EPG data in their file name. Typically (on tv stations that care
about their viewers) this contains the episode title of a series. The
subtitle is appended to the timer's file name, separated by a '~' character,
so that it results in all recordings of this timer being collected in a
common subdirectory. You can disable this with the 'UseSubtitle' parameter
in the "Setup" menu.
- The summary information is now taken from the EPG data at the actual time of
recording (no longer at the time the timer is created in the "Schedule" menu).
If a timer already has summary data, that data will be used. If you have
repeating timers in your 'timers.conf', you may want to make sure they do
NOT contain any summary information (that's the last field in the timer
definitions). Use your favourite text editor to delete that information.
That way every recording will store the actual summary data at the time of
the recording.
|
|
- Fixed displaying colored button texts that are too long.
- Suppressing replay progress display when replaying a DVD.
- Updated channels.conf.cable (thanks to Uwe Scheffler).
- Updated French OSD texts (thanks to Jean-Claude Repetto).
- Improved AC3 decoding when replaying DVDs (thanks to Matjaz Thaler).
- Fixed handling DVB card indexes when using only one card in a multi-card
system.
- Changed the 'Eject DVD' button text to a simple 'Eject' (the German text
was too long...).
- Made the font file generation more stable (thanks to Artur Skawina).
- Changed the default value for the "DiSEqC" setup parameter to "off".
- The new command line option '-E' can be used to define where the EPG data
shall be written to. This is especially useful if VDR runs in a system
that turns off the video disk when it is not used, and therefore needs
to write the EPG file to a ramdisk (or turn off writing it alltogether).
See 'vdr --help' for details.
- Making sure the disk is up and running before starting recording (this
is important for systems that turn off the video disk when it is not used).
- Added the "Jump" function in replay mode (thanks to Stefan Huelswitt).
See the description of the "Red" key in MANUAL under "Replay Control" for
details.
- Fixed displaying editing marks when toggling a mark in "pause" mode.
- If there is no free DVB device to record, the log message will now be given
only once.
- Made I/O more robust by handling EINTR (thanks to Werner Fink).
|
|
- Added Norwegian language texts (thanks to Jørgen Tvedt).
- Increased the usleep value in cDvbOsd::Cmd() to 5000 in order to work on
systems with the KURT/utime-patch (thanks to Guido Fiala).
- Changed the check whether the driver is loaded in runvdr to check for the
'dvb' module (the last one loaded).
- Fixed repeat function with LIRC (thanks to Stefan Huelswitt).
- Increased the upper limit for the symbol rate to 30000 (thanks to Ulrich
Röder).
- Made the position of the channel display configurable (thanks to Stefan
Huelswitt).
- Made the width and height of the OSD configurable (thanks to Stefan Huelswitt).
- DiSEqC support can now be generally enabled/disabled in the Setup menu. This
may be necessary if your multiswitch gets irritated by the default DiSEqC
codes '0' (thanks to Markus Lang).
- Fixed replaying in case there is no index file.
- Fixed jumping to an editing mark when replay has been paused.
- Avoiding unnecessary code execution in the replay progress display (thanks
to Guido Fiala).
- When entering time values the digits that still have to be entered are now
shown as '-' (as in "1-:--").
- When setting an editing mark while the progress display is not active, the
display will now be turned on for a short while to indicate the successful
setting of the mark.
- Updated 'channels.conf' for Premiere World (thanks to Helmut Schächner).
Check your timers if you use this channels.conf file, since the sequence of
several PW channels has been changed.
- Changed the color of "Info" messages to "black on green" and that of the
confirmation messages (like "Delete...") to "black on yellow".
- Fixed display with DEBUG_OSD (it still crashes sometimes, esp. when replaying,
but I can't seem to find what causes this... any ideas anybody?).
- Avoiding audio/video distortions in 'Transfer Mode' by no longer actually
tuning the primary interface (which can't receive this channel, anyway).
Apparently the driver gets irritated when the channel is switched and a
replay session is started immediately after that.
- Increased timeout until reporting "video data stream broken" when recording.
- Explicitly switching back to the previously active channel after ending a
replay session (to have it shown correctly in case it was in 'Transfer Mode').
|
|
- Fixed SVDRP commands LSTC and LSTT to make them return an error message if
no channels or timers are defined.
- Enhanced 'channels.conf.cable' (thanks to Hans-Peter Raschke).
- Fixed switching to another channel via the EPG while a recording is being
replayed.
- Fixed a memory leak in the EIT processor that happened when the system time
was set.
- Removed some redundant code from the cListBase destructor.
- Fixed internationalization of some Main menu texts.
- Updated 'channels.conf' after the recent changes of Premiere World (thanks
to Axel Gruber).
- Redesigned the ring buffer to make it work with two separate threads for
input and output (also prepared for using a remultiplexer).
- Fixed setting system time from transponders.
- Fixed a segfault in the Schedule menu in case there is no EPG information.
- The 'runvdr' script now kills any leftover vdr threads before restarting it.
- Fixed a problem with Daylight Saving Time when displaying the times of
recordings.
- Added Dutch language texts (thanks to Arnold Niessen).
- The new command line option -t can be used to set the controlling terminal
(thanks to Jürgen Sauer). This is especially useful when starting VDR through
an entry in /etc/inittab (see INSTALL).
- Since the CAM module only works if it is installed in the "highest" DVB card,
recordings now search for a free DVB card from lowest to highest index (as
opposed to the previous "highest to lowest" search) in order to not use the
CAM card for FTA recordings unless necessary. This is only important for
systems with three or more DVB cards.
- Added the "statdvb2vdr" tool from Hans-Peter Raschke.
- Fixed a segfault that sometimes happened when killing VDR.
- VDR now returns an exit status of '2' in case of an error at startup, instead
of terminating with 'abort()' (which caused a core dump).
- SVDRP now also works with clients that don't do line buffering (like the
Windows 'telnet').
- Empty lines in config files no longer cause error messages.
- New SVDRP command LSTE to list the EPG data.
- The SVDRP HELP command now prints the topics in several columns.
|
|
- Fixed 'Transfer Mode' in cases where a non-primary interface was switched to
a channel that only the primary interface can receive (which could happen in
the EPG scanner).
- The EPG scanner now starts with the first channel (it used to start with the
second channel).
- Reacitvated setting the PNR.
- Adapted the frame scanning to the new muxing of the driver.
- The new compile time option REMOTE=NONE can be used to compile VDR without
any remote control support (for applications where it shall be controlled
exclusively via SVDRP).
- The new command line option -D can be used to define which DVB interfaces
a certain instance of VDR shall use.
- The "Left" and "Right" keys are now used to page up and down in lists (thanks
to Martin Hammerschmid). Since the "Timers" menu already uses these keys to
(de)activate timers, this functionality is not available there.
- The "Main" and "Commands" menu now support "hotkeys", which means that if the
first non-blank character of a menu item is a digit in the range 1..9, that
item can be selected by pressing the respective numeric key on the remote
control.
- The channel data in 'channels.conf' now contains the teletext PID (thanks to
Dave Chapman). Existing files will be read normally (and the teletext PID set
to 0), but once they are written back (due to some channel editing) the file
will have the new format.
- The EPG scanner now scans each transponder only once per cycle.
- Deleted recordings are now automatically removed from disk after a while (not
only when disk space is being needed for a new recording).
- Fixed repeat function in LIRC remote control.
- Changed the MAXDVBAPI macro in dvbapi.c to 4 in order to directly support the
maximum possible number of DVB cards.
- The 'Ca' parameter in the default 'channels.conf' has been changed from '2'
to '3' because the VDR prototype now has 3 DVB cards (and currently the CAM
module only works if it is inserted into the last DVB card).
- The "Now", "Next" and "Schedule" menus now remember the current channel and
restore the list when switching between them.
- The "Green" button in the "Recordings" menu can now be used to rewind a
recording and play it from the very beginning.
- Fixed handling ':' in timer filenames and '\n' in timer summaries (see FORMATS).
- When removing recordings empty directories are now removed from the video
directory.
- Added the "schnitt" tools from Matthias Schniedermeyer.
- New SVDRP command MESG to display a short message on the OSD.
- The Perl script 'svdrpsend.pl' can be used to send SVDRP commands to VDR.
- SVDRP can now immediately reuse the same port if VDR is restarted.
- SVDRP now has a timeout after which the connection is automatically closed
(default is 300 seconds, can be changed in "Setup").
- The compile time switch VFAT can be used to make VDR avoid the ':' character
in file names (VFAT can't handle them). Do 'make VFAT=1' to enable this.
- Support for DVB-C (thanks to Hans-Peter Raschke and Peter Hofmann).
See the INSTALL file for more information about the use of VDR with cable.
- Fixed an occasional segfault in the EIT processor.
- A value of '0' for the EPGScanTimeout setup parameter now completely turns off
scanning for EPG data on both single and multiple card systems.
- New setup parameter "PrimaryLimit" that allows to prevent timers from using the
primary DVB interface in multi card systems. Default value is 0, which means
that every timer may use the primary interface.
- The 'active' field of a timer will now be explicitly set to '1' if the user
modifies an active timer (see FORMATS for details).
- The new command line option -w can be used to activate a watchdog that makes
VDR exit in case the main program loop does not respond for more than the
given number of seconds. This is mainly useful in combination with the new
'runvdr' script that restarts VDR in case is has exited.
|
|
- VDR now requires driver version 0.8.1 or higher.
- Recordings are now saved in PES mode. Note that you now need to install the
driver *WITHOUT* 'outstream=0'! This is the default when you 'make insmod' in
the DVB/driver directory.
Old recordings (in AV_PES mode) can still be replayed (as long as the driver
still supports replaying AV_PES files). The only limitation with this is that
in fast forward/back mode the picture may be slightly distorted and there may
be sound fragments.
- The EPG data is now dumped into the file /video/epg.data every ten minutes.
Use the Perl script 'epg2html.pl' to convert the raw EPG data into a simple
HTML programme listing.
- Fixed handling of channel switching with the "Blue" button in the "What's on
now/next?" menus.
- Fixed saving the MarginStop setup parameter.
- Fixed missing initialization in cConfig.
- Implemented "On Disk Editing".
- There is no more default 'timers.conf' file.
- Added Italian language texts (thanks to Alberto Carraro).
- Fixed starting a replay session when the program is currently in "transfer
mode".
- Fixed setting/modifying timers via SVDRP with empty summary fields.
- Fixed a problem with recordings that have a single quote character in their
name (this is now mapped to 0x01).
- Changed the value for Diseqc to '0' in the default 'channels.conf'.
- Fixed displaying channels and recording status in the RCU's LED display when
a recording is interrupted due to higher priority.
- Implemented safe writing of config files (first writes into a temporary file
and then renames it).
- In case the video data stream is broken the log message will come only every
5 seconds.
- The current channel is now saved in the 'setup.conf' file when VDR is cancelled,
and will be restored next time it is started (thanks to Deti Fliegl).
- The EIT scanning thread is now locked when switching channels to avoid problems.
- Encrypted channels can now be selected even without knowing the PNR (however, it
is still necessary for the EPG info).
|
|
- Date and time in the title of an event info page are now always right adjusted.
- The 'current channel' is now handled device specific (in case there is more
than one DVB card).
- The 'SetSystemTime' option in the "Setup" menu is now shown as "yes/no".
- Implemented "internationalization" (see 'i18n.c' for information on how to
add new languages). Thanks to Miha Setina for translating the OSD texts to
the Slovenian language.
- Fixed learning keys on the PC keyboard (display oscillated).
- Fixed a timing problem with OSD refresh and SVDRP.
- Avoiding multiple definitions of the same timer in the "Schedule" menu (this
could happen when pressing the "Red" button while editing the timer).
- There can now be a configuration file named 'commands.conf' that defines
commands that can be executed through the "Main" menu's "Commands" option
(see FORMATS for details on how to define these commands).
- Added a 'fixed' font for use with the output of system commands.
- The 'Priority' parameter of the timers is now also used to interrupt a low
priority timer recording if a higher priority timer wants to record.
- A timer recording on a DVB card with a CAM module will now be interrupted
by a timer that needs to use this specific DVB card to record an encrypted
channel, if the timer currently occupying this DVB card doesn't need the
CAM module (and thus can continue recording on a different DVB card).
- The "Yellow" button in the "What's on now/next?" menus now displays the
schedule of the current channel from that menu.
- All DVB cards in a multi-card system now write their EIT information into the
same data structure.
- If there is more than one DVB card in the system, the non-primary cards are
now used to periodically scan through the channels in order to keep the
EPG info up-to-date. Scanning kicks in after 60 seconds of user inactivity
(timeout in order to keep user interactions instantaneously) and each channel
that has the 'pnr' parameter defined in 'channels.conf' is switched to for
20 seconds. If there is only one DVB card in the system, that card will start
scanning after 5 hours (configurable through the "Setup" menu) of user inactivity
and will switch back to the channel it originally displayed at the first sign of
user activity. Any scanning will only occur if that particular card is not
currently recording or replaying.
- Now shifting the 'Subtitle' info into the 'ExtendedDescription' on stations
that don't send the EIT information correctly (like, e.g., 'VOX').
- Implemented a 10 seconds latency when removing files.
- Fixed unwanted reaction on the "Green" and "Yellow" button in the "Event" display.
- Implemented 'Transfer Mode' to display video data from the DVB card that actually
can receive a certain channel on the primary interface. This is currently in
an early state and may still cause some problems, but it appears to work nice
already.
|
|
- The EIT information is now gathered in a separate thread.
- The sytem time can now be synchronized to the time broadcast in the DVB data
stream. This can be enabled in the "Setup" menu by setting "SetSystemTime" to
1. Note that this works only if VDR is running under a user id that has
permisson to set the system time.
- The new item "Schedule" in the "Main" menu opens VDR's EPG (thanks to Robert
Schneider). See the MANUAL file for a detailed description.
- The new setup parameters MarginStart and MarginStop define how long (in
minutes) before the official start time of a broadcast VDR shall begin
recording, and how long after the official end time it shall stop recording.
These are used when a recording is programmed from the "Schedules" menu.
- The delay value in the dvb.c.071.diff patch to the driver has been increased
to '3', because on some systems the OSD was not displayed correctly. If you
are running an already patched version 0.71 driver and encounter problems
with the OSD, please make sure the parameter in the ddelay call is '3', not
'2'.
- Fixed initializing the RCU remote control code (didn't work after switching
on the system).
- Problematic characters in recording names (which can come from timers that
are programmed via the "Schedules" menu) are now replaced by suitable
substitutes.
|
|
- Remote control data is now received in a separate thread, which makes things
a lot smoother.
- Repeat and release of remote control keys is now explicitly distinguished.
- In replay mode the search forward/back and skip functions now have two modes:
Pressing the key shortly and releasing it starts the function, and pressing it
again stops it. Pressing and holding down the key starts the function and
releasing the key stops it.
- The '@' character that marks an "instant recording" can now be turned off
in the "Setup" menu (thanks to Matthias Schniedermeyer).
- Pressing the "Back" button while replaying now stops replaying and brings up
the "Recordings" menu (suggested by Carsten Koch). This can be used to easily
delete a recording after watching it, or to switch to a different recording.
- The "Recordings" menu now places the cursor on the last replayed recording, if
that file still exists.
- The "Blue" button in the "Main" menu can now be used to "Resume" a previously
stopped replay session (suggested by Martin Hammerschmid).
- The low and high LNB frequencies can now be changed in the "Setup" menu.
|
|
- Modified LIRC interface to better handle repeat function.
- Faster OSD by first writing into a bitmap and then sending the entire bitmap
to the DVB driver at once (requires the patch 'dvb.c.071.diff' to be applied
against the version 0.71 DVB driver file 'dvb.c').
- When switching channels the channel is now immediately displayed, and the
current/next information is shown as soon as it becomes available.
- No longer displaying the year in the 'Recordings' menu to saves space for the
title.
- The 'Recordings' menu now displays a '*' to indicate new recordings.
- Added the description of the timers.conf file to the FORMATS file (thanks to
Bastian Guse).
- Displaying as much as possible of the current/next info (dropping characters
that would display only partially).
- In normal viewing mode the '0' key now toggles between the current and the
previous channel.
|
|
- When scrolling through a list it now moves a full page up or down when the
cursor reaches the top or bottom of the menu (thanks to Heino Goldenstein!).
- Added missing '#include <sys/stat.h>' to recording.c.
- The video directory can now be defined with the command line option -v.
- There can now be more than one video directory (in case you have several
disks).
- Fixed learning key codes for PC keyboard.
- New command line option '-l' to set the log level.
- Times in timers.conf are now always printed with 4 digits (leading '0').
- Slow forward/back mode (thanks to Guido Fiala!).
- The "Up" key in replay mode no longer restarts replay at the very beginning,
but rather resumes normal replay mode after a "pause", "forward" or "backward"
operation. Use the "Skip -60s" function repeatedly to go back to the beginning
of the recording.
- Improved reaction on user input in fast/slow forward/back modes.
- No more upper limit for the value of 'Pnr'.
- Checking if the video card is really a DVB card.
- New SVDRP command UPDT to update an existing timer (or add a new one if it
doesn't yet exist).
- New version of the 'epg2timers' tool (with a modified channel list).
- Bugfix in closing window in DEBUG_OSD mode.
|
|
- Added support for LIRC remote control (thanks to Carsten Koch!).
There are now three different remote control modes: KBD (PC-Keyboard), RCU
and LIRC. See the INSTALL file for information on how to enable either of
these modes. The default mode is now KBD, not RCU as before (to make it
work immediately even if there is no actual remote control).
- Fixed small bug in dvbapi.c that was causing some channels (many on hotbird)
not to be correctly tuned (thanks to Plamen Ganev!).
- Now clearing the replay buffer in search forward/back, which results in
faster reaction.
- The 'Recordings' menu is now listed alphabetically (thanks to Carsten Koch!).
- The new 'epg2timers' tool (thanks to Carsten Koch!) can be used to convert
an EPG "merkliste" page (http://www.tvtv.de) to vdr timer entries.
- The new 'xtvrc2vdr' tool (thanks to Plamen Ganev!) can be used to convert
'xtvrc' channel files into 'vdr' format.
- When more than one timer matches at the same time, the first one in the list
with the highest 'Priority' is selected.
- The MANUAL section on "Programming the Timer" has been filled in.
- The year in the "Recordings" menu as well as in the progress display during
replay has been reduced to 2 digits to allow more space for the recording's
title. In the internal file structure the year is still stored with 4 digits,
so there will be no problem at the next turn of the century ;-)
- Channel names and timer filenames can now contain blanks. To avoid problems
with file names that contain blanks, all blanks in recording file names are
converted to underscores.
- The polarization can now be given in uppercase or lowercase characters in
channels.conf.
- Fixed buffer initialization to work with DVB driver version 0.6.
- Implemented the "Simple Video Disk Recorder Protocol" (SVDRP) to control
the VDR over a network connection.
- Implemented command line option handling.
- The program can now run in full background mode by using the --daemon option.
- Added a "summary" field to the timers (thanks to Carsten Koch!).
This field can contain a descriptive text of the programme and will be
displayed when the "Blue" key is pressed on a recording that was created by
this timer. If the text contains the special character '|', a newline will
be inserted at that place. When pressing "Ok" on a timer that contains a
summary field, the summary will be displayed. To edit such a timer the "Red"
key must be pressed. Timers without a summary still go into Edit mode when
pressing "Ok". The summary field can only be filled in directly by editing
the 'timers.conf' file with a text editor, or by defining/modifying the timer
via the SVDRP interface.
|
