| Age | Commit message (Collapse) | Author |
|---|
|
- Fixed some faulty default parameter initializations (thanks to Robert Schiele).
- Added further satellites to 'sources.conf' (thanks to Reinhard Walter Buchner
and Oliver Endriss).
- Updated Finnish OSD texts (thanks to Jaakko Hyvätti).
- Fixed a small glitch when switching channels (thanks to Dennis Noordsij for
reporting this one).
- Fixed handling multiple 'CaCaps' entries in 'setup.conf'.
- Group separators in 'channels.conf' may now be given like ':@201 My Channels',
where '@201' indicates the number to be given to the next channel. This can be
used to create 'gaps' in the channel numbering (see 'man 5 vdr'). BE CAREFUL
TO UPDATE YOUR 'timers.conf' ACCORDINGLY IF INSERTING THIS NEW FEATURE INTO YOUR
'channels.conf' FILE!
- Timers now internally have a pointer to their channel (this is necessary to
handle gaps in channel numbers, and in preparation for unique channel ids).
- Fixed slow reaction on SVDRP input (thanks to Guido Fiala for reporting this one).
- Added KI.KA to channels.conf.cable (thanks to Robert Schiele).
- Frequency values for cable and terrestrial channels in 'channels.conf' can
now be given either in MHz, kHz or Hz. The actual value given will be multiplied
by 1000 until it is larger than 1000000.
- Fixed skipping unavailable channels when zapping downwards.
- Fixed checking the Ca() status of a cDevice (thanks to Stefan Huelswitt).
- Fixed switching audio tracks in 'Transfer Mode' on the primary DVB device
(thanks to Steffen Barszus and Stefan Huelswitt for reporting this one and
helping to fix it).
- Fixed channel switching in case of an active 'Transfer Mode' on the primary
device ('Transfer Mode' is now launched with priority '-1').
- Fixed a ternary expression in dvbspu.c.
- Fixed handling 'Transfer Mode' on single device systems when recording an
encrypted channel (thanks to Stefan Huelswitt).
- Fixed blocking replaying in case an encrypted channel is being recorded on
the primary device.
- Now the name of the remote control is displayed when learning the keys.
- Fixed learning remote control keys in case there is more than one remote
control (thanks to Oliver Endriss for reporting this one).
- Implemented additional dedicated keys for "Play", "Pause", "Stop", "Record",
"FastFwd", "FastRew", "Channel+" and "Channel-". If your remote control supports
any of these keys you can delete your 'remote.conf' file and restart VDR to
go through the key learning procedure again in order to assign these new keys.
See MANUAL for more information.
Authors of player plugins should update their ProcessKey() functions so that
the new player keys have the same functionality as the "Up", "Down", "Left",
"Right" and "Blue" keys, respectively. Note that the existing functionality
of these keys should by all means be retained, since VDR (and any plugins)
shall be fully usable with just the basic set of keys. These new keys are only
for additional comfort in case the remote control in use supports them.
- Implemented new keys to directly access the VDR main menu functions "Schedule",
"Channels", "Timers", "Recordings", "Setup" and "Commands". If your remote
control provides keys you want to assign these functions to, you can delete
your 'remote.cof' file and restart VDR to go through the key learning procedure
again in order to assign these new keys. See MANUAL for more information.
- The new configuration file 'keymacros.conf' can be used to assign macros to
the color buttons in normal viewing mode, as well as to up to 9 user defined
keys. See MANUAL and man vdr(5) for more information. The default 'keymacros.conf'
implements the functionality of the "color button patch".
- Fixed a crash when learning the keys of several remote controls and pressing
buttons of those that have already been learned (thanks to Oliver Endriss for
reporting this one).
|
|
- Fixed an incomplete initialization of the filter parameters in eit.c (thanks
to Jeremy Hall).
- Fixed the 'newplugin' script for use with the NEWSTRUCT driver (thanks to
Andreas Schultz for reporting this one). If you have already created a plugin
directory and Makefile with 'newplugin', please apply the following patch to it:
-------------------------------------------------------
--- Makefile 2002/06/10 16:24:06 1.4
+++ Makefile 2002/09/17 15:36:36 1.5
@@ -15,7 +15,12 @@
### The directory environment:
+ifdef NEWSTRUCT
+DVBDIR = ../../../../DVB/include
+DEFINES += -DNEWSTRUCT
+else
DVBDIR = ../../../../DVB/ost/include
+endif
VDRDIR = ../../..
VDRINC = $(VDRDIR)/include
LIBDIR = ../../lib
@@ -34,7 +39,7 @@
INCLUDES = -I$(VDRINC) -I$(DVBDIR)
-DEFINES = -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
+DEFINES += -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
### The object files (add further files here):
-------------------------------------------------------
This is the diff for the 'setup' example that comes with VDR, so your line
numbers may be different.
- Added a missing 'public' keyword in device.h (thanks to Martin Hammerschmid).
- Fixed a race condition when starting 'Transfer Mode'.
- Rearranged the remote control key handling to allow plugins to implement
additional types of remote controls (see PLUGINS.html, section "Remote Control").
The previously used files 'keys.conf' and 'keys-pc.conf' have been replaced
by the file 'remote.conf', which holds the key definitions of all remote controls.
- The LIRC remote control keys are now handled just like the keyboard and RCU keys.
This means that you can use the lircd.conf file as is for your remote control,
without the need of editing it to make the key names the same as used in VDR.
When first starting VDR it will go into the "Learning keys" mode and ask you
to press the various keys. The resulting key assignment will be stored in
the file 'remote.conf'.
Since I have no way of testing the LIRC support, I hope I didn't break it in
the process...
- While learning the remote control keys it is now possible to press the 'Menu'
key to skip the definition of keys that are not available on your particular
RC unit.
- Fixed handling DVD subtitles in the SPU decoder (thanks to Andreas Schultz).
- Avoiding restarts due to 'panic level' when switching channels on the primary
device during EPG scan.
|
|
- Begin of the 1.1 development branch. THIS IS NOT A STABLE VERSION!
The current stable version for every day use is still the 1.0 branch.
- First step towards a universal plugin interface. See the file PLUGINS.html
for a detailed description. The man page vdr(1) describes the new options '-L'
and '-P' used to load plugins. This first step implements the complete "outer"
shell for plugins. The "inner" access to VDR data structures will follow.
- The VDR version number is now displayed in the title line of the "Setup" menu.
|
|
- Added Norwegian language texts (thanks to Jørgen Tvedt).
- Increased the usleep value in cDvbOsd::Cmd() to 5000 in order to work on
systems with the KURT/utime-patch (thanks to Guido Fiala).
- Changed the check whether the driver is loaded in runvdr to check for the
'dvb' module (the last one loaded).
- Fixed repeat function with LIRC (thanks to Stefan Huelswitt).
- Increased the upper limit for the symbol rate to 30000 (thanks to Ulrich
Röder).
- Made the position of the channel display configurable (thanks to Stefan
Huelswitt).
- Made the width and height of the OSD configurable (thanks to Stefan Huelswitt).
- DiSEqC support can now be generally enabled/disabled in the Setup menu. This
may be necessary if your multiswitch gets irritated by the default DiSEqC
codes '0' (thanks to Markus Lang).
- Fixed replaying in case there is no index file.
- Fixed jumping to an editing mark when replay has been paused.
- Avoiding unnecessary code execution in the replay progress display (thanks
to Guido Fiala).
- When entering time values the digits that still have to be entered are now
shown as '-' (as in "1-:--").
- When setting an editing mark while the progress display is not active, the
display will now be turned on for a short while to indicate the successful
setting of the mark.
- Updated 'channels.conf' for Premiere World (thanks to Helmut Schächner).
Check your timers if you use this channels.conf file, since the sequence of
several PW channels has been changed.
- Changed the color of "Info" messages to "black on green" and that of the
confirmation messages (like "Delete...") to "black on yellow".
- Fixed display with DEBUG_OSD (it still crashes sometimes, esp. when replaying,
but I can't seem to find what causes this... any ideas anybody?).
- Avoiding audio/video distortions in 'Transfer Mode' by no longer actually
tuning the primary interface (which can't receive this channel, anyway).
Apparently the driver gets irritated when the channel is switched and a
replay session is started immediately after that.
- Increased timeout until reporting "video data stream broken" when recording.
- Explicitly switching back to the previously active channel after ending a
replay session (to have it shown correctly in case it was in 'Transfer Mode').
|
|
- Fixed 'Transfer Mode' in cases where a non-primary interface was switched to
a channel that only the primary interface can receive (which could happen in
the EPG scanner).
- The EPG scanner now starts with the first channel (it used to start with the
second channel).
- Reacitvated setting the PNR.
- Adapted the frame scanning to the new muxing of the driver.
- The new compile time option REMOTE=NONE can be used to compile VDR without
any remote control support (for applications where it shall be controlled
exclusively via SVDRP).
- The new command line option -D can be used to define which DVB interfaces
a certain instance of VDR shall use.
- The "Left" and "Right" keys are now used to page up and down in lists (thanks
to Martin Hammerschmid). Since the "Timers" menu already uses these keys to
(de)activate timers, this functionality is not available there.
- The "Main" and "Commands" menu now support "hotkeys", which means that if the
first non-blank character of a menu item is a digit in the range 1..9, that
item can be selected by pressing the respective numeric key on the remote
control.
- The channel data in 'channels.conf' now contains the teletext PID (thanks to
Dave Chapman). Existing files will be read normally (and the teletext PID set
to 0), but once they are written back (due to some channel editing) the file
will have the new format.
- The EPG scanner now scans each transponder only once per cycle.
- Deleted recordings are now automatically removed from disk after a while (not
only when disk space is being needed for a new recording).
- Fixed repeat function in LIRC remote control.
- Changed the MAXDVBAPI macro in dvbapi.c to 4 in order to directly support the
maximum possible number of DVB cards.
- The 'Ca' parameter in the default 'channels.conf' has been changed from '2'
to '3' because the VDR prototype now has 3 DVB cards (and currently the CAM
module only works if it is inserted into the last DVB card).
- The "Now", "Next" and "Schedule" menus now remember the current channel and
restore the list when switching between them.
- The "Green" button in the "Recordings" menu can now be used to rewind a
recording and play it from the very beginning.
- Fixed handling ':' in timer filenames and '\n' in timer summaries (see FORMATS).
- When removing recordings empty directories are now removed from the video
directory.
- Added the "schnitt" tools from Matthias Schniedermeyer.
- New SVDRP command MESG to display a short message on the OSD.
- The Perl script 'svdrpsend.pl' can be used to send SVDRP commands to VDR.
- SVDRP can now immediately reuse the same port if VDR is restarted.
- SVDRP now has a timeout after which the connection is automatically closed
(default is 300 seconds, can be changed in "Setup").
- The compile time switch VFAT can be used to make VDR avoid the ':' character
in file names (VFAT can't handle them). Do 'make VFAT=1' to enable this.
- Support for DVB-C (thanks to Hans-Peter Raschke and Peter Hofmann).
See the INSTALL file for more information about the use of VDR with cable.
- Fixed an occasional segfault in the EIT processor.
- A value of '0' for the EPGScanTimeout setup parameter now completely turns off
scanning for EPG data on both single and multiple card systems.
- New setup parameter "PrimaryLimit" that allows to prevent timers from using the
primary DVB interface in multi card systems. Default value is 0, which means
that every timer may use the primary interface.
- The 'active' field of a timer will now be explicitly set to '1' if the user
modifies an active timer (see FORMATS for details).
- The new command line option -w can be used to activate a watchdog that makes
VDR exit in case the main program loop does not respond for more than the
given number of seconds. This is mainly useful in combination with the new
'runvdr' script that restarts VDR in case is has exited.
|
|
- Remote control data is now received in a separate thread, which makes things
a lot smoother.
- Repeat and release of remote control keys is now explicitly distinguished.
- In replay mode the search forward/back and skip functions now have two modes:
Pressing the key shortly and releasing it starts the function, and pressing it
again stops it. Pressing and holding down the key starts the function and
releasing the key stops it.
- The '@' character that marks an "instant recording" can now be turned off
in the "Setup" menu (thanks to Matthias Schniedermeyer).
- Pressing the "Back" button while replaying now stops replaying and brings up
the "Recordings" menu (suggested by Carsten Koch). This can be used to easily
delete a recording after watching it, or to switch to a different recording.
- The "Recordings" menu now places the cursor on the last replayed recording, if
that file still exists.
- The "Blue" button in the "Main" menu can now be used to "Resume" a previously
stopped replay session (suggested by Martin Hammerschmid).
- The low and high LNB frequencies can now be changed in the "Setup" menu.
|
|
- Modified LIRC interface to better handle repeat function.
- Faster OSD by first writing into a bitmap and then sending the entire bitmap
to the DVB driver at once (requires the patch 'dvb.c.071.diff' to be applied
against the version 0.71 DVB driver file 'dvb.c').
- When switching channels the channel is now immediately displayed, and the
current/next information is shown as soon as it becomes available.
- No longer displaying the year in the 'Recordings' menu to saves space for the
title.
- The 'Recordings' menu now displays a '*' to indicate new recordings.
- Added the description of the timers.conf file to the FORMATS file (thanks to
Bastian Guse).
- Displaying as much as possible of the current/next info (dropping characters
that would display only partially).
- In normal viewing mode the '0' key now toggles between the current and the
previous channel.
|
|
- NOTE: If you are using DVB driver version 0.7 you need to load the dvb.o
module with option outstream=0, so your insmod statement should read
'insmod dvb.o outstream=0'. This is currently necessary because 'vdr'
still works with AV_PES data.
- Video files now have the 'group read' bit set.
- Fixed handling errors in 'readstring()'.
- Handling SIGPIPE and re-establishing handler after intercepting a signal.
- The configuration files are now by default read from the video directory.
This can be changed by using the new '-c' option. Make sure you copy your
current '*.conf' files to your video directory ('/video' by default), or
use "-c ." to get the old behaviour of loading the configuration files
from the current directory.
- Waiting for input is now handled by a common function, which improves
response time on user actions. As a consequence the EIT data may sometimes
not be displayed, but this will change later when cEIT runs as a separate
thread.
- The new SVDRP command 'HITK' (thanks to Guido Fiala!) can be used to 'hit'
a remote control key. Establish an SVDRP connection and enter HITK without
a parameter for a list of all valid key names.
- The new SVDRP command 'GRAB' (thanks to Guido Fiala!) can be used to grab
the current frame and save it to a file.
- The new SVDRP commands 'OVL*' can be used to control video overlays (thanks
to Guido Fiala!). This is mainly for use in the 'kvdr' tool (see the 'kvdr'
page at http://www.s.netic.de/gfiala).
- If the name of the video directory used with the '-v' option had trailing
slashes, the recording file names have been damaged. Trailing slashes are
now silently removed.
- Fixed a buffer overflow in EIT parsing.
- Added a security warning regarding SVDRP to the INSTALL file.
- Fixed 'confirm' dialog.
- The daemon mode (option '-d') now no longer works with REMOTE=KBD (there
is no stdin in daemon mode, so KBD makes no sense - plus it sometimes
crashed).
|
|
- Added support for LIRC remote control (thanks to Carsten Koch!).
There are now three different remote control modes: KBD (PC-Keyboard), RCU
and LIRC. See the INSTALL file for information on how to enable either of
these modes. The default mode is now KBD, not RCU as before (to make it
work immediately even if there is no actual remote control).
- Fixed small bug in dvbapi.c that was causing some channels (many on hotbird)
not to be correctly tuned (thanks to Plamen Ganev!).
- Now clearing the replay buffer in search forward/back, which results in
faster reaction.
- The 'Recordings' menu is now listed alphabetically (thanks to Carsten Koch!).
- The new 'epg2timers' tool (thanks to Carsten Koch!) can be used to convert
an EPG "merkliste" page (http://www.tvtv.de) to vdr timer entries.
- The new 'xtvrc2vdr' tool (thanks to Plamen Ganev!) can be used to convert
'xtvrc' channel files into 'vdr' format.
- When more than one timer matches at the same time, the first one in the list
with the highest 'Priority' is selected.
- The MANUAL section on "Programming the Timer" has been filled in.
- The year in the "Recordings" menu as well as in the progress display during
replay has been reduced to 2 digits to allow more space for the recording's
title. In the internal file structure the year is still stored with 4 digits,
so there will be no problem at the next turn of the century ;-)
- Channel names and timer filenames can now contain blanks. To avoid problems
with file names that contain blanks, all blanks in recording file names are
converted to underscores.
- The polarization can now be given in uppercase or lowercase characters in
channels.conf.
- Fixed buffer initialization to work with DVB driver version 0.6.
- Implemented the "Simple Video Disk Recorder Protocol" (SVDRP) to control
the VDR over a network connection.
- Implemented command line option handling.
- The program can now run in full background mode by using the --daemon option.
- Added a "summary" field to the timers (thanks to Carsten Koch!).
This field can contain a descriptive text of the programme and will be
displayed when the "Blue" key is pressed on a recording that was created by
this timer. If the text contains the special character '|', a newline will
be inserted at that place. When pressing "Ok" on a timer that contains a
summary field, the summary will be displayed. To edit such a timer the "Red"
key must be pressed. Timers without a summary still go into Edit mode when
pressing "Ok". The summary field can only be filled in directly by editing
the 'timers.conf' file with a text editor, or by defining/modifying the timer
via the SVDRP interface.
|
|
- Added support for LIRC remote control (thanks to Carsten Koch!).
There are now three different remote control modes: KBD (PC-Keyboard), RCU
and LIRC. See the INSTALL file for information on how to enable either of
these modes. The default mode is now KBD, not RCU as before (to make it
work immediately even if there is no actual remote control).
|
|
- Support for more than one DVB card.
- Simultaneous record and replay (with two DVB cards).
- Instant recordings no longer get the name "instant". They now get the name
of the channel, with a prepended '@' character.
- Timers that are not given an explicit Name now use the channel name with
a prepended '@' character.
- If an instant recording is currently active, the Main menu now contains
an option to stop that recording.
- Timers are now only processed when the Menu is not active. So after editing
a timer the effect will take place only after the menu has been closed.
In order to avoid missing a timer event by inadvertently leaving the menu
open, the menu will be closed automatically after about two minutes of
inactivity.
- If a recording is currently being replayed, the Main menu now contains an
option to stop replaying.
- Displaying the recording DVB interface status in the decimal points of the
RCU display.
- Reduced the number of remote control keys. Modified the key assignments for
the PC keyboard to better resemble the "up-down-left-right-ok" layout on
menu controlling remote control units.
|
|
- Changed name from 'osm' to 'vdr' to avoid mixups with the 'oms' program that
appears to be in use with DVD replay.
- Implemented a channel display in the top menu line.
- Implemented replay progress display (press "Ok" when replaying to bring it up).
- Implemented direct channel selecting by pressing the numeric keys.
- Added several 'const' keywords to please stricter compilers.
- The repeat function for the remote control no longer adapts dynamically
to the timing of the RCU (this sometimes caused the repeat function to
kick in too early).
- Channel selection is now blocked when recording or replaying.
- Improved process handling.
|
|
|
