| Age | Commit message (Collapse) | Author |
|---|
|
- cDevice::PlayTs() now syncs on the TS packet sync bytes.
- Made MAXFRAMESIZE a multiple of TS_SIZE to avoid breaking up TS packets.
- No longer resetting the patPmtParser in cDevice::PlayTs(), because this
caused the selected audio and subtitle tracks to fall back to the default.
- The SVDRP command PUTE now supports reading the EPG data from a given file
(thanks to Helmut Auer).
- Added cThread::SetIOPriority() and using it in cRemoveDeletedRecordingsThread
(thanks to Rolf Ahrenberg).
- Fixed the MEGABYTE() macro to make it correctly handle parameters resulting in
values larger than 2GB.
- Added cDevice::NumProvidedSystems() to PLUGINS.html (was missing since it had
been implemented).
- Fixed distortions when switching to the next file during replay.
- Fixed detecting the frame rate for streams with PTS distances of 1800, which
apparently split one frame over two payload units.
- Added missing 'const' to cRecording::FramesPerSecond() (thanks to Joachim Wilke).
- Any TS packets in the first "frame" after a cut in an edited recording that don't
belong to a payload unit that started in that frame now get their TEI flag set,
so that a decoder will ignore them together with any PES data collected for that
PID so far (thanks to Oliver Endriss for reporting chirping sound disturbences at
editing points in TS recordings).
- cDvbPlayer::Empty() subtracts 1 from readIndex, because Action() will first
increment it.
- Only storing non-zero Pts values in ptsIndex.
- Added a note to the INSTALL file about using subdirectories to split a large
disk into separate areas for VDR's video data and other stuff (suggested by
Udo Richter).
|
|
- Fixed a hangup when replaying a TS recording with subtitles activated (reported
by Timo Helkio).
- Fixed handling the 'new' indicator in the recordings menu for TS recordings
(thanks to Derek Kelly).
- Added cap_sys_nice to the capabilities that are not dropped (thanks to Rolf
Ahrenberg).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Added cRecordingInfo::GetEvent() (thanks to Marcel Unbehaun).
- Improved synchronizing the progress display, trick modes and subtitle display
to the actual audio/video. This now works independent of any buffer sizes the
output device might use.
+ The cBackTrace class has been replaced with cPtsIndex, which keeps track
of the PTS timestamps of recently played frames.
+ cDevice::GetSTC() is now required to deliver the STC even in trick modes.
It is sufficient if it returns the PTS of the most recently presented
audio/video frame.
+ The full-featured DVB cards need an improved firmware in order to return
proper STC values in trick modes (thanks to Oliver Endriss for enhancing the
av7110 firmware).
- Adapted cFrameDetector::Analyze() to HD NTSC broadcasts that split frames over
several payload units (thanks to Derek Kelly for reporting this and helping in
testing).
- Modified cFrameDetector::Analyze() to make it process whole frames at once, so
that file I/O overhead is minimized during recording (reported by Günter
Niedermeier).
- Added command line help for the '-i' option.
- Fixed cDvbPlayer::NextFile() to handle files larger than 2GB (thanks to Jose
Alberto Reguero).
- Improved replay at the begin and end of a recording. The very first and very last
frame is now sent to the output device repeatedly until GetSTC() reports that it
has been played. cDvbPlayer::Action() no longer calls DeviceFlush() (thanks to
Reinhard Nissl for making sure vdr-xine no longer needs this).
- Added missing '[]' to the delete operator in cMenuEditStrItem::~cMenuEditStrItem().
- Added missing virtual destructor to cPalette.
- Now freeing configDirectory before setting it to a new value in
cPlugin::SetConfigDirectory().
- Fixed a crash when jumping to an editing mark in an audio recording.
- Fixed the 'VideoOnly' condition in the PlayPes() and PlayTs() calls in
cDvbPlayer::Action() (thanks to Reinhard Nissl).
- cDevice::PlayTs() now plays as many TS packets as possible in one call.
- Making sure any floating point numbers written use a decimal point (thanks to
Oliver Endriss for pointing out a problem with the F record in the info file of
a recording).
- Fixed detecting the frame rate for radio recordings.
- Added missing AUDIO_PAUSE/AUDIO_CONTINUE calls to cDvbDevice (thanks to Oliver
Endriss).
- No longer writing the video type into channels.conf if VPID is 0 (thanks to
Oliver Endriss for reporting this).
- Improved efficiency of cEIT::cEIT() (thanks to Tobias Bratfisch).
|
|
- Removed the '#define FE_CAN_2ND_GEN_MODULATION', since it was wrong and the
flag is now in the driver, anyway.
- The full-featured DVB cards are now given the TS data directly for replay
(thanks to Oliver Endriss for enhancing the av7110 driver to make it replay
TS data). The patch from ftp://ftp.cadsoft.de/vdr/Developer/av7110_ts_replay__1.diff
implements this change in the driver.
The patch av7110_v4ldvb_api5_audiobuf_test_1.diff mentioned in version 1.7.2
is still necessary to avoid audio and video glitches on some channels.
- Added a typecast in cUnbufferedFile::Write() to avoid an error message when
compiling on 64 bit systems.
- Added some missing 'const' statements to cBitmap (thanks to Andreas Regel).
- Fixed returning complete PES packets in cTsToPes::GetPes() (thanks to Reinhard
Nissl).
- Added a missing Detach() in cTransfer::Activate() (thanks to Marco Schlüßler).
- Added clearing the TS buffers in cDevice::Detach() (thanks to Marco Schlüßler).
- Fixed incrementing the continuity counter in cPatPmtGenerator::GetPmt() (thanks
to Johann Friedrichs).
- Fixed removing deleted recordings in case there is a problem. Once a recording
caused a problem with removing, no others were removed any more and an ongoing
recording could fill up the disk and cause other recordings to be deleted
automatically (reported by Reinhard Nissl).
- Added "DEFINES += -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE"
to Make.config.template (thanks to Johann Friedrichs for pointing this out).
Plugin authors should add this line to their Makefile or Make.config if they use
file access functions that need special versions for 64 bit offsets.
- The new command line option -i can be used to set an "instance id", which will
be used to distinguish recordings of the same broadcast made by different instances
of VDR (suggested by Frank Schmirler). This replaces the use of the "resume id"
that was introduced in version 1.7.3.
- Added checking mutexCurrentAudioTrack to cDevice::PlayTs() (thanks to Reinhard
Nissl for pointing this out).
- Fixed handling the pointer field in cPatPmtParser::ParsePmt() (thanks to Frank
Schmirler - sorry I swapped two lines when adopting the original patch).
- Checking the remaining packet length after processing the pointer field in
cPatPmtParser::ParsePat() and cPatPmtParser::ParsePmt() (suggested by Frank
Schmirler).
- Checking the pointer field in cPatPmtParser::ParsePmt() only in 'payload start'
packets (suggested by Frank Schmirler).
- Changed cPatPmtGenerator to make sure the PMT pid doesn't collide with any of
the actual pids of the channel.
- Fixed cDevice::PlayTsAudio() and made cDevice::PlayTsVideo() return 0 if
PlayVideo() didn't play anything.
- Added an 'int' typecast to calculations involving FramesPerSecond() to avoid
compiler warnings (reported by Winfried Koehler).
- Fixed detecting frames for pure audio recordings.
- Fixed editing PES recordings. The frame type in the index.vdr file generated for
the edited PES recording is set to 1 for I-frames and 2 for all others (P- and
B-frames). The exact frame type doesn't matter for VDR, it only needs to know if
it's an I-frame or not.
- The PAT/PMT is now only processed if its version changes (reported by Reinhard
Nissl).
- Fixed handling the maximum video file size (reported by Udo Richter).
- Improved fast-forward/-rewind for audio recordings. The actual data is now sent
to the output device, so that it can be replayed and thus cause the proper delay.
For pure audio recordings the audio is no longer muted in fast-forward/-rewind
mode, so that some orientation regarding the position within the recording is
possible. There may still be some offset in the replay position displayed by the
progress indicator when switching from fast-forward/-rewind to play mode, as well
as in the current position during normal play mode. This is due to the various
buffers between the player and the output device and will be addressed later.
Note the new function cDevice::IsPlayingVideo(), which is used to inform the
player whether there is video data in the currently replayed stream. If a derived
cDevice class reimplements PlayTs() or PlayPes(), it also needs to make sure this
new function works as expected.
|
|
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
- Fixed handling the 'pointer field' in generating and parsing PAT/PMT (thanks to
Frank Schmirler).
- Fixed handling modulation types for DVB-S transponders when processing the NIT.
- Changed cDvbDevice::GrabImage() to use V4L2 (thanks to Marco Schlüßler).
- Added a poll to cDvbDevice::PlayVideo() and cDvbDevice::PlayAudio() to avoid
excessive CPU load (this is just a makeshift solution until the FF DVB cards
can play TS directly).
- The recording format is now Transport Stream. Existing recordings in PES format
can still be replayed and edited, but new recordings are done in TS.
All code for recording in PES has been removed.
The following changes were made to switch to TS recording format:
+ The index file format has been changed to support file sizes of up to 1TB
(previously 2GB), and up to 65535 separate files per recording (previously
255).
+ The recording file names are now of the form 00001.ts (previously 001.vdr).
+ The frame rate is now detected by looking at two subsequent PTS values.
The "frame duration" (in multiples of 1/90000) is stored in the info.vdr
file using the new tag F (thanks to Artur Skawina for helping to get the
IndexToHMSF() calculation right).
+ Several functions now have an additional parameter FramesPerSecond.
+ Several functions now have an additional parameter IsPesRecording.
+ The functionality of cFileWriter was moved into cRecorder, and cRemux is
now obsolete. This also avoids one level of data copying while recording.
+ cRemux, cRingBufferLinearPes, cTS2PES and all c*Repacker classes have been
removed.
+ A PAT/PMT is inserted before every independent frame, so that no extra
measures need to be taken when editing a recording.
+ The directory name for a recording has been changed from
YYYY-MM-DD-hh[.:]mm.pr.lt.rec (pr=priority, lt=lifetime) to
YYYY-MM-DD-hh.mm.ch-ri.rec (ch=channel, ri=resumeId).
Priority and Lifetime are now stored in the info.vdr file with the new
tags P and L (if no such file exists, the maximum values are assumed by
default, which avoids inadvertently deleting a recording if disk space
is low). No longer storing Priority and Lifetime in the directory name
avoids starting a new recording if one of these is changed in the timer
and the recording is re-started for some reason.
Instead of Priority and Lifetime, the directory name now contains the
channel number from which the recording was made, and the "resume id" of
this instance of VDR. This avoids problems if several VDR instances record
the same show on different channels, or even on the same channel.
The '-' between channel number and resumeId prevents older versions of
VDR from "seeing" these recordings, which makes sure they won't even try
to replay them, or remove them in case the disk runs full.
+ The semantics of PlayTs*() have been changed. These functions are now
required to return the given Length (which is TS_SIZE) if they have
processed the TS packet.
+ The files "index", "info", "marks" and "resume" within a TS recording
directory are now created without the ".vdr" extension.
+ The "resume" file is no longer a binary file, but contains tagged lines
to be able to store additional information, like the selected audio or
subtitle track.
+ cDevice::StillPicture() will now be called with either TS or PES data.
+ cDvbPlayer::Goto() no longer appends a "sequence end code" to the data.
If the output device needs this, it has to take care of it by itself.
- Fixed cPatPmtParser::ParsePmt() to reset vpid and vtype when switching from
a video to an audio channel (thanks to Reinhard Nissl).
- cDvbDevice now uses the FE_CAN_2G_MODULATION flag to determine whether a device
can handle DVB-S2. The #define is still there to allow people with older drivers
who don't need DVB-S2 to use this version without pathcing.
|
|
- Added a note about 'Id' being obsolete to the description of cDevice::PlayAudio().
- Switched to the new S2API driver API, which was decided to become the official
DVB API in the kernel (based on patches from Igor M. Liplianin, Niels Wagenaar
and Edgar Hucek). VDR now uses the S2API driver from http://linuxtv.org/hg/v4l-dvb.
In order to correctly detect DVB-S2 capable devices, you need to apply the patch
from ftp://ftp.cadsoft.de/vdr/Developer/v4l-dvb-s2api-add-s2-capability.diff to
the driver source, because the S2API doesn't provide a way of telling whether a
device can handle DVB-S2 transponders.
- The cDvbTuner::IsTunedTo() function now also checks the symbol rate in case of
DVB-S and DVB-C.
- Improved handling PES video packets with zero length when converting from TS to PES.
For good replay in Transfer Mode on full featured DVB cards you may want to apply
the patch from ftp://ftp.cadsoft.de/vdr/Developer/av7110_v4ldvb_api5_audiobuf_test_1.diff
to the driver (thanks to Oliver Endriss).
|
|
- Adapted the tuning code to the new DVBFE_SET_DELSYS API (thanks to Reinhard Nissl).
VDR now uses the driver from http://jusst.de/hg/multiproto_plus.
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Removed obsolete $(NCURSESLIB) from the Makefile.
- Implemented handling the standard component descriptor for AC3 (stream=4), as it
will soon be used by the German ARD channels (thanks to Michael Pennewiß for
advance information about this change). The previously used "Premiere pseudo
standard" (stream=2, type=5) still works, but has apparently been wrongfully used
by broadcasters from the beginning.
- Added missing description of the 'S' channel parameter to vdr.5 (reported by
Reinhard Nissl).
- The SVDRP signon message now indicates the character encoding in use, as in
"220 video SVDRP VideoDiskRecorder 1.7.1; Fri May 2 16:17:10 2008; ISO-8859-1".
This may be useful for instance for external tools that provide EPG data, so that
they can correctly encode the strings.
- No longer calling FcFini() to avoid problems with older (broken) versions of
fontconfig (suggested by Edgar Toernig).
- Removed the compile time option VFAT to allow users of precompiled binary
distributions to have full control over whether or not to use the --vfat option
at runtime (suggested by Michael Nork).
- First step towards switching to TS (Transport Stream) as recording format:
+ The new function cDevice::PlayTs() is used to play TS packets.
+ The new functions cDevice::PlayTsVideo() and cDevice::PlayTsAudio()
are used to play video and audio TS packets, respectively.
+ The new function cAudio::PlayTs() is used to play audio TS packets.
+ The new class cPatPmtGenerator is used to generate a PAT/PMT pair that precedes
the TS data in Transfer Mode.
+ The new class cPatPmtParser is used by cDevice to parse the PAT/PMT data in a
TS in order to find out which streams it contains.
+ The new class cTsToPes is used to convert TS packets to a PES packet.
+ cTransfer no longer uses cRemux, and doesn't run a separate thread any more.
It just generates a PAT/PMT and sends all received TS packets to the primary
device's PlayTs().
+ Live subtitle display no longer uses a ring buffer and separate thread.
+ cPesAssembler has been removed. Old VDR recordings only contain complete PES
packets.
+ Since a TS needs to have a PAT/PMT, which requires the video stream type to
be explicitly given, the format of the VPID field in the channels.conf file
and the SVDRP commands NEWC/MODC/LSTC has been extended. The video stream type
now follows the VPID and optional PPID, separated by an '=' sign.
- Updated the sources.conf file (thanks to Oleg Roitburd).
- Fixed a possible integer overflow in GetAbsTime() (thanks to Alexander Rieger).
- Fixed a problem with calling isyslog() from within the SignalHandler() (thanks
to Udo Richter).
- Replaced the Finnish language code "smi" with "suo" (thanks to Rolf Ahrenberg).
- Fixed wrong value for TableIdBAT in libsi/si.h (thanks to Winfried Köhler).
- Errors in config files no longer keep VDR from starting.
- Removed unneeded include files <linux/dvb/dmx.h> und <time.h> from remux.h
(reported by Tobias Grimm).
|
|
- Re-implemented handling of DVB-S2, which first appeared in version 1.5.14, but was
revoked in version 1.5.15 in favor of making a stable version 1.6.0. VDR now
requires the "multiproto" DVB driver, e.g. from http://jusst.de/hg/multiproto.
Note that the channels.conf file now supports additional parameters, so you may
want to make sure you have a backup of this file in case you need to go back to
the previous version of VDR!
- Fixed displaying transponder data when it is modified (thanks to Reinhard Nissl).
- Fixed handling the counter in detection of pre 1.3.19 PS data (thanks to Reinhard
Nissl).
- Improved logging system time changes to avoid problems on slow systems under
heavy load (suggested by Helmut Auer).
- Now setting the thread name, so that it can be seen in 'top -H' (thanks to Rolf
Ahrenberg).
- Fixed initializing the timer's flags in the cTimer copy constructor (thanks to
Andreas Mair).
- Fixed setting the OSD level in the 'osddemo' example (thanks to Wolfgang Rohdewald).
- Increased the time between checking the CAM status to 500ms to avoid problems
with some CAMs (reported by Arthur Konovalov).
|
|
- Implemented handling DVB subtitles (thanks to Marco Schlüßler, and also to
Pekka Virtanen for writing the subtitle plugin, which helped in implementing
subtitle handling in VDR).
- The new remote control key "Subtitles" can be used to bring up the list
of available subtitles.
- The new setup option "DVB/Subtitle languages" can be used to define the
preferred languages for subtitles.
- Fixed selecting the audio track when pressing Ok in the Audio menu (thanks
to Marco Schlüßler).
- Implemented display of DVB subtitles in live viewing mode.
- Implemented subtitle track selection.
- Implemented bitmap color reduction and shrinking to display subtitles even
on devices that can't display the necessary number of colors.
- Added compatibility mode for playback of recordings made with the subtitles
plugin (with some help from Rolf Ahrenberg).
- The new setup option "DVB/Subtitle offset" can be used to shift the location
of the subtitles in the vertical direction.
- The new setup options "DVB/Subtitle foreground/background transparency"
define an additional level of transparency for the foreground and background
color of subtitles.
- Existing recordings made with the subtitle plugin can be given an 'X' record
in their info.vdr file, so that subtitles can be automatically selected upon
replay, according to the preferred language setup, as in
X 3 03 ger deutsch
(see vdr.5). Note that these entries need to be added in the proper sequence,
so that they correspond with the actual track languages in the recording.
- Now generating translation files without line numbers to avoid unnecessarily
large diffs. Plugin authors may want to replace the -F option with
--no-location in the xgettext and msgmerge calls in their Makefiles.
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added a missing Channels.SetModified(true) call when deleting or moving a
channel in the Channels menu (reported by Halim Sahin).
- Fixed a missing '-' at the next to last line of SVDRP help texts (reported by
Denis Knauf).
- Added a missing SetVolumeDevice() call in cDevice::SetPrimaryDevice() (reported
by Reinhard Nissl).
- Fixed a crash when pressing Left while at the first character of a cMenuEditStrItem
(thanks to Christian Wieninger).
- Only creating a new cDvbOsdProvider in cDvbDevice::MakePrimaryDevice() if 'On'
is true (i.e. this device is being made the primary device).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Fixed handling reallocated memory in cCharSetConv::Convert() (reported by Udo
Richter).
- Fixed a new[]/delete mismatch in cMenuEditStrItem::LeaveEditMode() (thanks to
Udo Richter).
- Implemented sending all frames to devices that can handle them in fast forward
trick speeds (thanks to Timo Eskola).
- Updated the Hungarian language texts (thanks to Thomas Günther).
- Fixed description of DeviceSetAvailableTrack() and cReceiver(), and added an
example ~cMyReceiver() in PLUGINS.html (thanks to Marco Schlüßler).
- Improved the description of where logging goes in the INSTALL file (thanks to
Elias Luttinen).
- Added a note about how to initiate internationalization support to the
README.i18n file. The Makefile generated by the 'newplugin' script now has the
'i18n' target automatically create an initial 'po/pluginname.pot' file.
Plugin authors may want to add the '$(I18Npot)' dependency to the 'i18n'
target in their Makefiles, as in
i18n: $(I18Npot) $(I18Nmo)
(based on a suggestion by Torsten Kunkel).
- Removed a duplicate ',' from the ca_ES.po file (thanks to Thomas Günther).
- Added the 'ß' character to the "allowed characters" in the de_DE.po file
(suggested by Thomas Günther).
- Made the default copy ctor of cRecording private (thanks to Markus Hahn).
Same for the assign operator.
- Added cRecording::Undelete() (based on a patch from Markus Hahn).
- Added cDevice::CloseFilter() to allow a device to have complete control over
both opening and closing section filters (thanks to Rolf Ahrenberg).
- Some fixes to PLUGINS.html (thanks to Rolf Ahrenberg).
|
|
- Fixed updating the "Info" button in the "Timers" menu.
- Reduced the number of events to actually check when setting events to timers.
- cMenuEditIntItem now checks the given value and forces it to be between the
given min and max limits.
- The status changes of EPG events are now logged for all channels that have timers.
- Removed the log message "deleting plugin: ..." when shutting down VDR (thanks to
Christoph Haubrich for reporting that this is irritating when calling "vdr --help").
- Fixed cReadLine::Read() for lines that end with the infamous "\r\n" (thanks to
Rolf Ahrenberg).
- Fixed cDvbDevice::SetAudioBypass() in case setTransferModeForDolbyDigital is false
(thanks to Werner Fink).
- Updated 'sources.conf' (thanks to Oleg Roitburd).
- Fixed the shutdown timeout (thanks to Alexander Wenzel).
- Only calling RemoveEmptyVideoDirectories() once in case a recording has been
deleted (reported by Hardy Flor).
- Fixed deleting recordings that have been removed externally when running out of
disk space (reported by Jan Lenz).
- Fixed handling repeating VPS timers (they stopped recording too early).
- Timer log messages now show "VPS" if this is a VPS timer.
- Fixed getting the present EPG event in case none is currently 'running' (it
then returns the one that just ended).
- Fixed calling a plugin's main menu function while a message is being displayed
(reported by Helmut Auer).
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
- Made cMenuRecordings::GetRecording() 'protected' (suggested by Marius Heidenstecker).
- Speeded up cRemux::ScanVideoPacket() (thanks to Reinhard Nissl).
- Enhanced logging EPG event data.
- Fixed format string handling (thanks to Darren Salt).
- The new function cDevice::ForceTransferMode() can be used to force the primary
device into transfer mode (thanks to Reinhard Nissl).
- The 'version' of EPG events is now ignored when reading EPG data from 'epg.data'
or via SVDRP/PUTE to avoid problems with double EPG events.
- The 'running status' of EPG events is now only set to SI::RunningStatusNotRunning
for events before the present event.
- Fixed some #include sequences.
- Single shot VPS timers are now only considered 'expired' if their associated
EPG event has been explicitly set to SI::RunningStatusNotRunning.
- The check for timers to be deleted is now done only every 30 seconds.
|
|
- Added missing German OSD texts for 'Audio language'.
- The Setup/CICAM menu now only contains the devices that actually have a CI and
dynamically detects the number of slots a CI provides.
- Implemented cAudioRepacker for better handling of audio PES packets (thanks to
Reinhard Nissl).
- Modified handling of audio packets for radio channels in remux.c (thanks to
Reinhard Nissl).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Fixed the EPG scan, so that it doesn't use the primary device if that is
currently in Transfer-Mode from itself (thanks to Marcus Hilbrich for a bug
report that lead to this).
- Removed the TUNER_LOCK_TIMEOUT in cDevice::AttachReceiver() since it caused more
trouble than it fixed.
- Fixed detecting short channel names for "Kabel Deutschland", who uses a comma
as delimiter (thanks to Marco Schlüßler).
- Moved cMenuEditTimer and cMenuEvent to menu.h so that plugins can use it (suggested
by Thomas Günther).
- The new static function cString::sprintf() can be used to easily create a formatted
string.
- Plugins can now implement their own SVDRP commands (based on a patch from Hardy
Flor). See PLUGINS.html, section "SVDRP commands" for details. The SVDRP commands
of a plugin are accessed through the new SVDRP command PLUG.
See PLUGINS/src/svdrpdemo for an example of how to use this feature.
- The new SVDRP command PLAY can be used to start replaying a recording (thanks to
Hardy Flor).
- The new SVDRP command EDIT can be used to start the editing process of a recording
(based on the CUTR patch by Harald Milz).
|
|
- Added a sleep in cDvbPlayer::Action() in case there is no data to send to the
device, which avoids a busy loop on very fast machines (thanks to Martin Wache).
- Modified the description of cDevice::Poll() to avoid misunderstandings.
- Updated Croatian language texts (thanks to Drazen Dupor).
- cDvbPlayer::Goto() now appends a Sequence End Code to get the image shown
immediately with softdevices (thanks to Reinhard Nissl).
- Reactivated cVideoRepacker in remux.c after some fixes (thanks to Reinhard Nissl).
- Removed the fix for handling VPS timers, so that they only record if the event
they are assigned to actually has the given VPS time. This has caused repeating
VPS timers to stop recording prematurely.
- Avoiding duplicate components in EPG events when reading epg.data or in the
PUTE SVDRP command (thanks to Olaf Titz for reporting this one).
- Added the command line options '--lirc', '--rcu' and '--no-kbd' to allow setting
the remote control at runtime (based on a patch by Darren Salt).
- Now checking whether timers or channels are currently being edited via the menu
before making changes through SVDRP (thanks to Andreas Brugger for reporting a
problem with this).
- Files and directories are now created with rights according to the shell's
umask settings (thanks to Andreas Brachold).
- Fixed the cChannel copy constructor (thanks to Marcel Wiesweg for pointing out
a problem with it).
- Fixed an out-of-bounds memory access with audio language ids (thanks to
Matthias Lenk for reporting, and Udo Richter for suggesting a fix).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added missing storing of the MenuScrollPage parameter (thanks to Frank Krömmelbein).
- Added cRemux::SetTimeouts() for better use of cRemux in a single thread (thanks
to Udo Richter for reporting a problem with this).
- Modified cEITScanner::Process() so that it uses the primary device if it is
replaying and is the only device that provides the given transponder, and that
a forced EPG scan works even if EPG scan timeout is set to 0 (thanks to
Bernhard Stegmaier for reporting a problem with this).
- Fixed cDvbSpuBitmap::putPixel() (thanks to Reinhard Nissl).
- Fixed setting system time to avoid time jumps in case of faulty data (thanks
to Andreas Böttger).
- Fixed a memory leak in the SVDRP command LSTE (thanks to Stefan Huelswitt).
|
|
- Making sure at least the default skin is available at program start in case a
plugin needs to issue an error message (thanks to Achim Tuffentshammer for
reporting a crash in such a case). Also checking if there is a current skin
in cSkins::Message().
- Completed the Finnish OSD texts and fixed internationalization of the text
for "Setup/DVB/Audio language(s)" (thanks to Rolf Ahrenberg).
- Completed the Estonian OSD texts and switched to iso8859-13 character set
(thanks to Arthur Konovalov).
- Made cCondWait::SleepMs() sleep at least 3ms to avoid a possible busy wait.
- Fixed canceling the LIRC thread (thanks to Marco Schlüßler for pointing out
this one).
- The "Green" button in the "Main" menu is now always "Audio", since the audio
channel might be changed even if there is only one actual audio PID.
- Fixed handling the '-E' option which was broken in version 1.3.18 (thanks to
Christian Jacobsen for reporting this one).
- Added 'channels.conf.terr' entries for Mainz (thanks to Michael Heyse).
- Implemented cDolbyRepacker for better handling of Dolby Digital PES packets
(thanks to Reinhard Nissl).
- Fixed playing files with PES packets longer than 2048 byte through the full
featured DVB card (thanks to Marco Kremer for reporting this one and providing
a test sample).
- Recording and Transfer Mode now handle more than 2 audio PIDs. For this the
interfaces of the following functions have been changed:
cTransferControl::cTransferControl()
cTransfer::cTransfer()
cRecorder::cRecorder()
cReceiver::cReceiver()
cRemux::cRemux()
- Fixed a possible race condition in cDevice::Action() and cTSBuffer::Action()
(thanks to Stefan Huelswitt).
- Extended some buffer sizes to allow handling HDTV streams (thanks to Reinhard
Nissl).
- Added 'channels.conf.terr' entries for Düsseldorf and Köln (thanks to Walter Koch).
- Falling back to 'stereo' when switching channels in case the user had switched
to 'left' or 'right' (suggested by Rolf Groppe).
- Completed the Danish OSD texts (thanks to Mogens Elneff).
- Recording and Transfer Mode can now handle up to 8 Dolby Digital tracks (thanks
to Marco Schlüßler for a patch that implements substream handling into
cDevice::PlayPesPacket(), and Reinhard Nissl for adding substream handling to
cDolbyRepacker).
- Added PlayPes(NULL, 0) to cTransfer::Action() when clearing the transfer buffer
to avoid overflows (thanks to Marco Schlüßler for pointing this out).
|
|
- Fixed checking for the presence of NPTL (thanks to Jouni Karvo).
- Making sure section filters are only set if the device actually has a lock
(thanks to Andreas Share for pointing this out).
- Fixed a possible NULL pointer assignment in cMenuText::SetText() (thanks to
Marco Schlüssler).
- Fixed a crash in case the last line in channels.conf is a group separator and
that group is selected in the channel display (thanks to Dick Streefland).
- Added cRingBufferLinear::Read() to read directly from a file handle into the
ring buffer.
- Using timeouts in ring buffers to avoid 'usleep()'.
- Clearing the 'Transfer Mode' ring buffer after clearing the device to avoid
an "almost full" ring buffer.
- Removed locking from cRingBufferLinear for better performance under high load.
- Using a cRingBufferLinear in cRemux to avoid unnecessary copying of data.
- Using a cRingBufferLinear in cTSBuffer and filling it in a separate thread
to avoid buffer overflows. Plugins using cTSBuffer will need to remove the
call to the now obsolete Read() function (see cDvbDevice::GetTSPacket() for
the new usage of cTSBuffer).
- cRemux::Process() has been split into Put(), Get() and Del() to allow for a
better decoupling of the remuxing and disk writing process. Plugins using
cRemux will need to be modified accordingly.
- The actual disk writing in recordings is now done in a separate thread to
improve the overall throughput.
- Changed cRemux so that it returns the maximum available amount of data with
each call, not just 2048 byte.
- Added a visual display of all cRingBufferLinear buffers for debugging. To
activate it, define DEBUGRINGBUFFERS in ringbuffer.h.
- Instead of cCondVar now using the new cCondWait (which also avoids a possible
"near miss" condition; thanks to Sascha Volkenandt for pointing out this one).
cCondVar is still present for plugins that use it (and VDR itself also still
uses it in cRemote).
- The cRingBuffer now does EnableGet()/EnablePut() only if the buffer is more than
one third full or empty, respectively. This dramatically improves recording
performance and reduces system load (thanks to Marco Schlüßler for doing some
testing regarding buffer performance and giving me some hints that finally led
to finding out that this was the basic problem causing buffer overflows).
- Improved Transfer Mode (thanks to Marco Schlüßler for suggestions and testing).
- Fixed a possible crash with inconsistent SI data (thanks to Marcel Wiesweg).
- Fixed showing the replay mode if the OSD is currently in use (thanks to Kimmo
Tykkala for pointing out this problem).
- cOsdProvider::NewOsd() now always returns a valid pointer, even if the OSD is
currently in use (it will then return a dummy cOsd object and write a message to
the log file).
- Added Estonian language texts (thanks to Arthur Konovalov).
- Fixed 'newplugin' and libsi/Makefile to use the compiler defined in $(CXX) for
generating file dependencies (thanks to Andreas Brachold).
- Moved the initialization of aPid1 and aPid2 to the beginning of cDvbDevice::cDvbDevice()
to have them set in case a patch references them (thanks to Wayne Keer for pointing
this out).
- Completed the Russian OSD texts (thanks to Vyacheslav Dikonov).
- Avoiding unnecessary section filter start/stops (thanks to Marco Schlüßler).
- Made the "Channel not available!" message and mtInfo instead of mtError (suggested
by Wayne Keer).
- Made volume control more linear (thanks to Emil Naepflein and Udo Richter).
- Now skipping code table info in SI data (suggested by Milos Kapoun).
- Added missing Czech characters to fontosd-iso8859-2.c (thanks to Milos Kapoun).
- Fixed a crash in the time search mechanism (reported by Reinhard Nissl).
- If one PID can't be added, the whole cDevice::AttachReceiver() will now fail
and all PIDs added so far will be deleted (thanks to Marco Schlüßler for
pointing out this one).
- Now only saving channels.conf after a modification made by the user (avoids
lots of disk access due to automatic channel updates). Automatic channel
modifications will be saved every 10 minutes if no recording is currently
active.
- Removed the 'Log' parameter from the cChannel::Set... functions. Instead
checking if the channel has a non-zero number.
- Updated 'channels.conf.terr' for Hannover (thanks to Sven Kreiensen).
|
|
- Fixed reading the EPG preferred language parameter from 'setup.conf'.
- Fixed switching to a visible programme in case the current channel has neither
a video nor an audio PID.
- Fixed editing channels (SID now range checked) and creating new channels (NID,
TID and RID are now set to 0).
- Fixed transponder handling to make it work with satellites that provide two
transponders on the same frequency, with different polarization, like Hispasat
at S30.0W (thanks to Thomas Bergwinkl for pointing this out). See man vdr(5)
for details about the enhanced channel ID format.
- Since there appears to be no general solution for the UPT error yet, a recording
now initiates an "emergency exit" if the number of UPT errors during one
recording exceeds 10 (suggested by Gregoire Favre). Since the UPT error doesn't
happen on my system, this has not been explicitly tested.
The "preliminary fix" for the UPT error in VDR/dvbdevice.c has been disabled
by default, since it makes channel switching unpleasently slow. If you want
to have that workaround back, you can uncomment the line
//#define WAIT_FOR_LOCK_AFTER_TUNING 1
in VDR/dvbdevice.c.
- Adapted the 'sky' plugin to use the actual channel IDs, and to fetch EPG data
from www.bleb.org.
- Limited automatic retuning to devices that actually provide the transponder
(necessary for the 'sky' plugin).
- Fixed handling receivers in the 'sky' plugin, so that a recording on the same
channel won't interrupt an ongoing Transfer Mode.
- Added subtable ID and TSDT handling to 'libsi' (thanks to Marcel Wiesweg).
- Fixed some Russian OSD texts (thanks to Vyacheslav Dikonov).
- Added the 'running status' to the EPG events. This is necessary for implementing
the VPS function for recording.
- Removed the obsolete 'present' and 'following' handling from the EPG data.
- The EPG data is now always kept sorted chronologically in the internal data
structures. This also means that any EPG data retrieved through the SVRDP
command LSTE is guaranteed to be sorted by start time.
- Now using the 'running status' in the channel display, so that a programme
that has an end time that is before the current time, but is still running,
will still be shown in the display (provided the broadcasters handle the
'running status' flag correctly). This also applies to programmes that have
a start time that is in the future, but are already running.
- Implemented an "EPG linger time", which can be set to have older EPG information
still displayed in the "Schedule" menu (thanks to Jaakko Hyvätti).
- Added PDCDescriptor handling to 'libsi'.
- Implemented handling the VPS timestamps (aka "Programme Identification Label")
for full VPS support for timers (provided the tv stations actually broadcast
this information). The VPS time is displayed in the event info page if it exists
and is different than the event's start time.
- Extended the SVDRP command LSTE to allow limiting the listed data to a given
channel, the present or following events, or events at a given time (thanks to
Thomas Heiligenmann).
- Fixed a typo in libsi/si.h (thanks to Stéphane Esté-Gracias).
- Timers can now be set to use the VPS information to control recording a programme.
The new setup options "Recording/Use VPS" and "Recording/VPS margin", as well as
the "VPS" option in the individual timers, can be used to control this feature
(see MANUAL for details).
Note that this feature will certainly need a lot of testing before it can be
called "safe"!
- The "Schedule" and "What's on now/next?" menus now have an additional column
which displays information on whether there is a timer defined for an event,
whether an event has a VPS time that's different than its start time, and
whether an event is currently running (see MANUAL under "The "Schedule" Menu"
for details).
|
|
- Fixed detecting broken connection to the LIRC daemon (thanks to Ludwig Nussel).
- Now sending CA descriptors to the CAM in the same sequence as they were originally
received (thanks to Stefan Huelswitt).
- The PCR PID can now be set separately from the video PID. The syntax in the
'channels.conf' file is, for example, ...:164+17:..., where 164 is the video PID
and 17 is the PCR PID. The separator is a '+' sign, not a comma or semicolon as
with the audio PIDs, because this is not an alternate PID, but rather an
additional, necessary PID. In order to use this feature you need a driver version
dated 2003-04-27 or higher (setting the PCR PID didn't work in earlier versions).
- Fixed deleting the last recording in the "Recordings" menu, which started pausing
live video (thanks to Christoph Friederich for reporting this one).
- Now setting the "broken link" flag for GOPs at the beginning of a new video
sequence, which avoids artefacts when cutting (thanks to Stefan Huelswitt).
- Removed the Mute() call from cDvbDevice::StillPicture() (suggested by Andreas
Schultz).
- Updated 'channels.conf.terr' for Berlin (thanks to Andreas Brachold).
- Extended logging info when starting/stopping timers to show the channel number,
start/stop time and the file name (suggested by Manuel Hartl).
- Added a note regarding non-VDR files in the /videoX directories to INSTALL
(suggested by Benjamin Harling).
- Skipping keys that come in too fast from LIRC (thanks to Christian Jacobsen).
- Avoiding short display of the main menu if a plugin displays its own OSD and
is started through a user defined key macro (thanks to Andreas Mair for reporting
this one).
- Reduced the time to wait for EPG data when starting a recording to 3 seconds.
- The new SVDRP command STAT can be used to request information about the disk
usage (thanks to Thomas Koch).
- Fixed faulty calculation of section length in eit.c (thanks to Teemu Rantanen).
|
|
- Completely switched to the new CVS HEAD version of the linux-dvb driver.
The NEWSTRUCT compile time switch is now obsolete. The required driver is now
the CVS HEAD version dated 2002-11-01 or later.
- Adjusted the INSTALL file to the 1.1.x version.
- Only accepting key presses from the current remote control when learning (thanks to
Oliver Endriss).
- Fixed the EPG scanner, which broke 'Transfer Mode' as soon as it kicked in
(thanks to Oliver Endriss for reporting this one).
- Fixed handling audio tracks in cDvbDevice.
- Updated channels.conf.terr (thanks to Uwe Scheffler).
- Fixed displaying the group separators in the channel display (thanks to Martin
Hammerschmid for pointing out this one).
- The Makefile now includes the file Make.config (if present in the VDR source
directory), which allows the user to overwrite several settings with individual
values (suggested by Andreas Schultz). The VDR distribution archive does not
contain this file in order to not overwrite a user defined file. There is a
Make.config.template which contains the default values of the macros the user
can overwrite.
- Since there have been changes to the 'newplugin' script authors of plugins
may want to newly create their plugins' Makefiles with the new version of this
script, and adapt them to their individual needs (make sure you don't overwrite
your existing plugin directory - make a backup copy first!).
- Fixed reading EPG data via the SVDRP command PUTE (it changed the current
service ID).
- Fixed closing all dup'ed file descriptors in cPipe.
- Implemented a plugin interface for additional audio processing (see PLUGINS.html
under "Dolby Digital").
The functionality of the '-a' command line option has been reactivated.
Since the author doesn't have any Dolby Digital equipment this may or may not
work as expected. There may still be some places where a call to cAudios::Clear()
or cAudios::Mute() is necessary. Those with Dolby Digital equipment should please
take a look at this and maybe send patches.
Replaying Dolby Digital in ways other than through VDR's '-a' option will have to
be implemented as plugins. Those who have written patches for VDR version 1.0.x
should convert their work into the proper plugins for version 1.1.x.
Note to authors of cPlayer derived plugins: please read the modified comments
in device.h regarding the member functions cDevice::Clear(), cDevice::Mute() and
cDevice::PlayAudio(). Derived classes must call these base class member functions
to make sure all registered cAudio objects are properly handled. Also note that
the return type of cDevice::PlayAudio() has been changed to 'void', since this
function always has to accept the entire data block immediately and there is
nothing that could be reasonably done in case an error occurs in one of the
cAudio objects.
- Now checking the driver's DVB_API_VERSION in dvbdevice.h. Since VDR now requires
a driver dated 2002-11-01 or later the MIN_DVB_DRIVER_VERSION_FOR_TIMESHIFT and
DVB_DRIVER_VERSION stuff has been replaced with DO_REC_AND_PLAY_ON_PRIMARY_DEVICE,
which can be used to disable simultaneous recording and replaying on the primary
DVB device in case there are problems with this.
|
|
- Added cDevice::DeviceNumber() to get the number of a device, not counting any
gaps that might be in the index count.
- Fixed fetching the current/next information to handle cases where the duration
of an event is set wrongly and would last beyond the start time of the next
event.
- Adapted type names to the new HEAD version of the driver (which the previous
NEWSTRUCT branch has been merged into). Note that to use this driver version
you still need to add NEWSTRUCT=1 to the make call when building VDR. You
need a HEAD version of the LinuxDVB driver dated 2002-10-11 or later to compile
VDR with NEWSTRUCT=1.
- Fixed radio channels in channels.conf.cable (thanks to Robert Schiele and Uwe
Scheffler).
- Fixed switching the video format in the Setup/DVB menu (thanks to Uwe Scheffler
for reporting this one).
- Reactivated full handling of second audio PID (even in 'Transfer Mode').
- Fixed a crash when closing down with remote control plugins (thanks to Oliver
Endriss helping to debug this one).
- Commands in the file 'commands.conf' can now have a '?' at the end of their
title, which will result in a confirmation prompt before executing the
command.
- Changed a few leftover 'new char[...]' to MALLOC(char, ...).
- If a command executed from the "Commands" menu doesn't return any output, the
OSD will now be closed automatically.
- The SVDRP command PUTE now triggers an immediate write of the 'epg.data' file
(suggested by Gerhard Steiner).
- The new configuration file 'reccmds.conf' can be used to define commands that
shall be executed from the "Recordings" menu; see MANUAL and 'man vdr(5)' for
details (suggested by Gerhard Steiner).
|
|
- Adapted VDR to the NEWSTRUCT driver. To use the new driver, compile VDR with
'make NEWSTRUCT=1' (thanks to Holger Wächtler for some valuable advice).
By default it currently still uses the old driver.
- Added some missing #includes (thanks to Martin Hammerschmid).
- Changed the log error message "can't record MPEG1!" to "error in data stream!",
since the mentioning of MPEG1 has irritated many people.
- Consistently using malloc/free and new/delete (thanks to Andreas Schultz).
- Temporarily made cDevice::ProvidesCa() virtual (Andreas Schultz needs this
in his DXR3 plugin).
- cDevice no longer exposes a file handle to cPlayer. A derived cPlayer class
can now call DevicePoll() to see whether the replay device is ready for
further data. A derived cDevice class must implement Poll() and shall
check if any of its file handles is ready for data.
- Implemented several replay modes to allow players that play only audio (thanks
to Stefan Huelswitt).
- Improved cCondVar::Wait() and implemented cCondVar::TimedWait() (thanks to
Stefan Huelswitt).
- VDR no longer gives up if there is no DVB device. It continues to work if
there is at least one device, either a DVB device found by the core VDR code
itself, or a device implemented by a plugin.
|
|
- Re-visited the race condition fix in the cDvbPlayer (thanks again to Andreas
Schultz).
- Changed the VFAT handling to allow users who normally use it but have forgotten
to set it when compiling a new version of VDR to at least see their recordings
made with VFAT enabled (thanks to Christian Rienecker).
- Added some missing teletext PIDs (thanks to Joerg Riechardt).
- Fixed PID handling for cReceiver.
- Added a missing #include to ringbuffer.c (thanks to Martin Hammerschmid).
- Now using CC, CFLAGS, CXX and CXXFLAGS in Makefile.
- Changed the cDevice class to allow plugins to implement their own devices (see
PLUGINS.html for details).
|
|
- Added Norwegian language texts (thanks to Jørgen Tvedt).
- Increased the usleep value in cDvbOsd::Cmd() to 5000 in order to work on
systems with the KURT/utime-patch (thanks to Guido Fiala).
- Changed the check whether the driver is loaded in runvdr to check for the
'dvb' module (the last one loaded).
- Fixed repeat function with LIRC (thanks to Stefan Huelswitt).
- Increased the upper limit for the symbol rate to 30000 (thanks to Ulrich
Röder).
- Made the position of the channel display configurable (thanks to Stefan
Huelswitt).
- Made the width and height of the OSD configurable (thanks to Stefan Huelswitt).
- DiSEqC support can now be generally enabled/disabled in the Setup menu. This
may be necessary if your multiswitch gets irritated by the default DiSEqC
codes '0' (thanks to Markus Lang).
- Fixed replaying in case there is no index file.
- Fixed jumping to an editing mark when replay has been paused.
- Avoiding unnecessary code execution in the replay progress display (thanks
to Guido Fiala).
- When entering time values the digits that still have to be entered are now
shown as '-' (as in "1-:--").
- When setting an editing mark while the progress display is not active, the
display will now be turned on for a short while to indicate the successful
setting of the mark.
- Updated 'channels.conf' for Premiere World (thanks to Helmut Schächner).
Check your timers if you use this channels.conf file, since the sequence of
several PW channels has been changed.
- Changed the color of "Info" messages to "black on green" and that of the
confirmation messages (like "Delete...") to "black on yellow".
- Fixed display with DEBUG_OSD (it still crashes sometimes, esp. when replaying,
but I can't seem to find what causes this... any ideas anybody?).
- Avoiding audio/video distortions in 'Transfer Mode' by no longer actually
tuning the primary interface (which can't receive this channel, anyway).
Apparently the driver gets irritated when the channel is switched and a
replay session is started immediately after that.
- Increased timeout until reporting "video data stream broken" when recording.
- Explicitly switching back to the previously active channel after ending a
replay session (to have it shown correctly in case it was in 'Transfer Mode').
|
|
- Fixed SVDRP commands LSTC and LSTT to make them return an error message if
no channels or timers are defined.
- Enhanced 'channels.conf.cable' (thanks to Hans-Peter Raschke).
- Fixed switching to another channel via the EPG while a recording is being
replayed.
- Fixed a memory leak in the EIT processor that happened when the system time
was set.
- Removed some redundant code from the cListBase destructor.
- Fixed internationalization of some Main menu texts.
- Updated 'channels.conf' after the recent changes of Premiere World (thanks
to Axel Gruber).
- Redesigned the ring buffer to make it work with two separate threads for
input and output (also prepared for using a remultiplexer).
- Fixed setting system time from transponders.
- Fixed a segfault in the Schedule menu in case there is no EPG information.
- The 'runvdr' script now kills any leftover vdr threads before restarting it.
- Fixed a problem with Daylight Saving Time when displaying the times of
recordings.
- Added Dutch language texts (thanks to Arnold Niessen).
- The new command line option -t can be used to set the controlling terminal
(thanks to Jürgen Sauer). This is especially useful when starting VDR through
an entry in /etc/inittab (see INSTALL).
- Since the CAM module only works if it is installed in the "highest" DVB card,
recordings now search for a free DVB card from lowest to highest index (as
opposed to the previous "highest to lowest" search) in order to not use the
CAM card for FTA recordings unless necessary. This is only important for
systems with three or more DVB cards.
- Added the "statdvb2vdr" tool from Hans-Peter Raschke.
- Fixed a segfault that sometimes happened when killing VDR.
- VDR now returns an exit status of '2' in case of an error at startup, instead
of terminating with 'abort()' (which caused a core dump).
- SVDRP now also works with clients that don't do line buffering (like the
Windows 'telnet').
- Empty lines in config files no longer cause error messages.
- New SVDRP command LSTE to list the EPG data.
- The SVDRP HELP command now prints the topics in several columns.
|
