| Age | Commit message (Collapse) | Author |
|---|
|
- Re-implemented handling of DVB-S2, which first appeared in version 1.5.14, but was
revoked in version 1.5.15 in favor of making a stable version 1.6.0. VDR now
requires the "multiproto" DVB driver, e.g. from http://jusst.de/hg/multiproto.
Note that the channels.conf file now supports additional parameters, so you may
want to make sure you have a backup of this file in case you need to go back to
the previous version of VDR!
- Fixed displaying transponder data when it is modified (thanks to Reinhard Nissl).
- Fixed handling the counter in detection of pre 1.3.19 PS data (thanks to Reinhard
Nissl).
- Improved logging system time changes to avoid problems on slow systems under
heavy load (suggested by Helmut Auer).
- Now setting the thread name, so that it can be seen in 'top -H' (thanks to Rolf
Ahrenberg).
- Fixed initializing the timer's flags in the cTimer copy constructor (thanks to
Andreas Mair).
- Fixed setting the OSD level in the 'osddemo' example (thanks to Wolfgang Rohdewald).
- Increased the time between checking the CAM status to 500ms to avoid problems
with some CAMs (reported by Arthur Konovalov).
|
|
- Fixed setting the current subtitle track in Transfer-Mode (reported by Petri Helin,
thanks to Reinhard Nissl for pointing out that cDevice::Transferring() doesn't
return the right value in the early stage of channel switching).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Updated the Dutch OSD texts (thanks to Carel Willemse).
- Fixed various spelling errors and improved PLUGINS.html (thanks to Ville Skyttä).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Fixed the format in cRemote::Put() to use "%016llX" instead of "%016LX" (thanks
to Ludwig Nussel for pointing this out).
- Revised the fix of calculating the scrollbar height in the skins. The scrollbar
handle now always has a height that is at least the width of the scrollbar.
- When switching the device that's used for live viewing away from the current
transponder in favor of an upcoming recording, an attempt is now made to stay
on the current channel by possibly going into 'Transfer Mode'.
- The CAM menu now stays open as long as it is automatically updated, even without
pressing a remote control key. This is important when updating the CAM firmware
from the transponder.
- No longer trying to switch to an available channel if the primary device has
no valid programme and a menu is open (avoids interference with the CAM in
case a CAM menu is open).
- Increased the valid range of the "Subtitle offset" setup option to -100...100
(thanks to Rolf Ahrenberg).
- Added the backslash ('\') to the list of characters that need to be escaped
when executing external commands (thanks to Peter Bieringer for reporting this one).
|
|
- Fixed the declaration of cSubtitleObject::Decode8BppCodeString() (thanks to
Gregoire Favre).
- The new setup option "Miscellaneous/Emergency exit" can be used to turn off
the automatic restart of VDR in case a recording fails for some reason.
- The kInfo key is now propagated to any open menu, so that it can react to it
in a context sensitive manner (suggested by Andreas Brugger). If there is
no menu open it will show the info of the current broadcast or replay.
- cTimeMs now uses the monotonic clock, if available (thanks to Petri Hintukainen).
- Fixed cVector::Clear() and cStringList::Clear().
- Added cString::Truncate().
- Fixed the "i18n:" target in the "newplugin" script, so that it can create the
initial *.pot file.
- Fixed handling the '-l' option.
- Fixed error handling in cCuttingThread::Action() (thanks to Udo Richter).
- Fixed a loss of the date display in the "classic" skin's main menu (reported by
Andreas Brugger).
- Added a missing setting of lastFreeMB in cMenuMain::Update() (reported by
Andreas Brugger).
- Added '-Wno-parentheses' to the compiler options in order to avoid silly compiler
warnings for expressions like 'a || b && c', where GCC 4.3 wants to force the
programmer to write 'a || (b && c)', while everybody knows that '&&' links
stronger than '||' (reported by Tobias Grimm).
- Updated the Hungarian language texts (thanks to István Füley).
- Fixed displaying weekday names in the Schedule menu if the system uses UTF-8
(reported by Jiri Dobry).
- The new plugin "pictures" implements a simple picture viewer.
See PLUGINS/src/pictures/README for details.
- The automatic shutdown is now suppressed if the remote control is currently
disabled (suggested by Helmut Auer, implemented by Udo Richter).
- Added a section about "Logging" to PLUGINS.html (suggested by Torsten Kunkel).
- Enhanced the SVDRP command CLRE to allow clearing the EPG data of a particular
channel (thanks to Benjamin Hess).
|
|
- Fixed checking compatibility mode for old subtitles plugin (thanks to Marco
Schlüßler).
- Updated the French OSD texts (thanks to Michael Nival).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- The "Play" key now starts replay of the selected recording in the Recordings
menu (thanks to Ville Skyttä);
- Improved shutdown handling (thanks to Udo Richter).
- Housekeeping now waits for a while after a replay has ended (thanks to Udo Richter).
- Added more special characters to the list of allowed characters when entering
strings (thanks to Thomas Günther).
- Added Ukrainian language texts (thanks to Yarema Aka Knedlyk).
- Added a workaround for recovering from wrongfully interpreted "pre 1.3.19 PS1 packets".
- Fixed a possible blocking in replay when subtitles are active.
- Fixed displaying subtitles in live mode.
- Fixed handling CONFDIR (thanks to Rolf Ahrenberg).
- Added some missing 'const' keywords (thanks to Sascha Volkenandt).
- The 'Allowed' parameter in cMenuEditStrItem() is now NULL by default, which results
in using tr(FileNameChars) (suggested by Thomas Günther).
- Added a missing '.' to the date returned by DayDateTime() (thanks to Lauri Nurmi).
- Improved the 'i18n' target in the Makefile to avoid unnecessary work (thanks to
Stefan Huelswitt). The 'newplugin' and 'i18n-to-gettext.pl' scripts have been
changed accordingly. Plugin authors may want to adjust the 'i18n' target
of their Makefiles.
- Fixed a crash if no fonts are found (thanks to Mario Ivankovits and Clemens
Kirchgatterer).
- Fixed decoding filename characters in case there are not two hex digits after
the '#' (reported by Helmut Auer).
|
|
- Added cDevice::HasCi() so that devices with Common Interface can be avoided
when tuning to an FTA channel, thus preserving the CAM resources even on budget
DVB cards (suggested by Petri Helin).
- Fixed i18n characters for the Hungarian texts (thanks to Thomas Günther).
- Now using cPipe instead of popen() in cCommand::Execute() to avoid problems
with open file handles when starting background commands (thanks to Reinhard
Nissl).
- Removed 'assert(0)' from cDvbSpuDecoder::setTime() (thanks to Marco Schlüßler).
- Fixed a possible crash when loading an invalid XPM file (thanks to Martin Wache).
- Updated satellite names in 'sources.conf' (thanks to Thilo Wunderlich).
- Adapted 'libsi' to DVB-S2 (thanks to Marco Schlüßler).
- Fixed handling error status in cDvbTuner::GetFrontendStatus() (thanks to
Reinhard Nissl).
- Shutdown handling has been rewritten (thanks to Udo Richter).
- Plugins can now implement the new function WakeupTime() to request VDR to wake
up at a particular time (thanks to Udo Richter).
- The HUP signal now forces a restart of VDR (thanks to Udo Richter).
- cThread::EmergencyExit() has been replaced by ShutdownHandler.RequestEmergencyExit().
- Several references to "button" in a remote control context have been changed
to "key" (based on a report from Marko Mäkelä regarding the "Menu button closes"
text). The "MenuButtonCloses" parameter in 'setup.conf' has therefore been
renamed to "MenuKeyCloses", accordingly. This will result in an "unknown config
parameter: MenuButtonCloses" error message in the log file, so you may want to
remove that entry from your 'setup.conf' file.
- Simplified the error handling in cDvbTuner::GetFrontendStatus() (based on a
discussion with Reinhard Nissl).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Increased the maximum number of DVB devices to 8 (thanks to Rolf Ahrenberg).
- The new Setup parameter "Channel entry timeout" can be used to customize the time
since the last keypress until a numerically entered channel number is considered
complete, and the channel is switched (suggested by Helmut Auer). Setting this
parameter to 0 turns off the automatic channel switching, and the user will
have to confirm the entry by pressing the "Ok" key.
|
