summaryrefslogtreecommitdiff
path: root/skins.h
AgeCommit message (Collapse)Author
2006-01-08Version 1.3.38vdr-1.3.38Klaus Schmidinger
- Fixed handling second audio and Dolby Digital PIDs for encrypted channels (was broken in version 1.3.37). - Improved TS/PES conversion to better handle lost TS packets (thanks to Reinhard Nissl). - Limited the frequency of log messages from the cRepackers. - Now using the gettid() syscall to get a thread's pid, so that we get a useful value on NPTL systems (suggested by Johannes Stezenbach). - Fixed the RCU remote control handling to avoid problems with NPTL (thanks to Andreas Share for reporting a lockup with the RCU on NPTL systems). - When displaying the amount of free disk space, the space consumed by recordings that have been "deleted" but not yet actually "removed" is now taken into account (suggested by Christian Vogt). - Now avoiding unnecessary disk access when checking if there are deleted recordings that need to be removed (reported by Carsten Koch). - Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now a deleted recording is retained at least DELETEDLIFETIME seconds before actually removing it. The value of DELETEDLIFETIME has been changed to 300. So after (possibly inadvertently) deleting a recording, there will be at least 5 minutes in which it can be recovered (unless a new recording immediately requires the disk space). The count starts again at 0 every time VDR is started. - Fixed a possible crash when displaying the "Low disk space!" message from a background thread (thanks to Christof Steininger). - Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler). - Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground and background threads won't interfere. - The main menu now dynamically updates its contents in case an instant recording or replay stops, etc. - The version number of EPG events is now also stored in the epg.data file (thanks to Kendy Kutzner). - EPG events that are no longer in the currently broadcasted data stream are now automatically deleted. - Removed an invalid access to Event->schedule in cSchedule::DelEvent(). - Modified cSchedule::Cleanup() (events are always sorted by time). - Schedules are now cleaned up once every hour (not only at 05:00). - The "Schedule" and "What's on now/next?" menus are now updated if a timer is set or modified. - cTimer no longer has its own 'schedule' member, it rather uses that of the event it has been set to. - The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus now immediately creates a timer for the selected event and marks it with 'T'. If the event is already marked with 'T', the "Red" button opens the "Edit timer" menu for that timer. - Removing deleted recordings is now done in a separate thread. - Dropped the unused "stop recording on primary interface" stuff. - Converting a grabbed image to JPEG is now done with the new function RgbToJpeg() (see tools.h). - The SVDRP command GRAB now determines the image type (JPEG or PNM) from the extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit 'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but has no meaning any more. - The function cDevice::GrabImage() no longer writes the grabbed image to a file, but rather returns a pointer to the image in memory. The wrapper function cDevice::GrabImageFile() can be used to write the grabbed image directly to a file. Plugins that used the old version of cDevice::GrabImage() need to be adapted to the new interface. - The new class cBase64Encoder (see tools.h) can be used to encode data in base64 (thanks to Bob Withers for publishing his Base64 class). - The SVDRP command GRAB now writes the image data to the SVDRP connection (encoded in base64) if the given file name consists of only the file extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file name (based on a suggestion from Darren Salt). A simple way of viewing a grabbed image on a remote host is: svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display - - The new command line option '-g' must be given if the SVDRP command GRAB shall be allowed to write image files to disk. The parameter to this option must be the full path name of an existing directory, without any "..", double '/' or symlinks. By default, or if "-g- is given, grabbing to files is not allowed any more because of potential security risks. - Modified the way the SVDRP command GRAB writes the grabbed image to a file to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino Peña): + The file handle is now opened in a way that it won't follow symbolic links (suggested by Darren Salt). + The given file name is now canonicalized, so that it won't contain any ".." or symlinks (suggested by Darren Salt). + Grabbing to files is limited to the directory given in the the command line option '-g'. By default grabbing to files is not allowed any more. - Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos). - Changed all "illegal" to "invalid" in error messages (there's nothing "illegal" in VDR ;-). - When started as user 'root' VDR now switches to a lesser privileged user id, keeping the capability to set the system time (based on a patch from Ludwig Nussel). By default the user id 'vdr' is used, which can be changed through the new command line option '-u'. Note that for security reasons VDR will no longer run as user 'root' (unless you explicitly start it with '-u root', but this is not recommended!). The 'runvdr' script has been changed to use the '-u' option. - Changed the API of the functions cStatus::Recording() and cStatus::Replaying(), so that they can provide the full file name of the recording. Plugins that use these (or the related cStatus::Msg...() functions) need to be adapted (suggested by Andreas Brugger). - The DVB devices now retune (and, if applicable, resend the DiSEqC data) if the lock is lost (based on a patch from Reinhard Nissl). - Fixed handling multi byte key sequences in cKbdRemote (based on a patch from Jürgen Schneider). - Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco Schlüßler). - Made the static cControl functions thread safe (thanks to Patrick Fischer). - Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid warnings with g++ 4.1.0 (thanks to Ville Skyttä). - Fixed incrementing the 'state' variables in the repacker classes in remux.c to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä). - The Makefile now reports a summary of failed plugins (thanks to Udo Richter). - The cTimer constructor can now take an optional cChannel (suggested by Patrick Fischer). - Fixed setting the main thread id if VDR is running as a daemon. - Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl). - Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner). - Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger). - Now using FE_READ_STATUS to read the current frontend status (suggested by Holger Wächtler). - The "Menu" key now behaves consistently. If there is anything on the OSD, it is closed when the "Menu" key is pressed, and if there is nothing on the OSD, the "Menu" key opens the main menu (suggested by Luca Olivetti). - The new option "Setup/OSD/Timeout requested channel info" can be used to turn off the automatic timeout of the channel display in case it was invoked by a press of the "Ok" key (suggested by Thiemo Gehrke). - A message is now given when an instant recording is started (suggested by Helmut Auer). Actually the code was already there, just commented out - don't remember why it wasn't active... - Removed an obsolete "Summary" text from i18n.c and preceded all key definition texts with "Key$" to avoid duplicates (reported by Lucian Muresan). - Preceded all button texts with "Button$". - Removed obsolete "Eject", "Language" and "scanning recordings..." texts. - Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill). - Disabled the use of "fadvise" in cUnbufferedFile because there have been several reports that it causes more problems than it solves (suggested by Petri Hintukainen). If you want to use "fadvise", you can activate the line //#define USE_FADVISE in tools.c. - Removed unused 'offset' member from cOsdItem. - In the "Channels" menu the numeric keys now position the cursor to the channel with the given number (see MANUAL, section "Remote Control Keys", note (3) for details). - The "Mark/Move" function in the "Channels" menu now also works in the non-numeric sort modes. - The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if this is a menu. - The new "Info" key brings up information on the currently viewed programme or recording. For a live programme this is the same as "Schedule/Ok", i.e. the description of the current EPG event. For a recording this is the same as shown by the "Info" button in the "Recordings" menu. Plugins that implement players can overwrite their cControl::GetInfo() function to show their own info (see PLUGINS.html for details). Pressing the "Info" key again while the info is displayed will close the OSD. In order to assign this new key to an existing remote control setup, the remote.conf file needs to be deleted and VDR has to be restarted to go through the process of learning the remote control keys. - Any cReceivers still attached to a cDevice when that device switches to a different transponder are now automatically detached (suggested by Patrick Fischer). - The "flags" of a timer are now handled as an unsigned integer value. In order to do this, the interface of cMenuEditBitItem also had to be changed. - In string entry fields (like, e.g., the file name of a recording) the characters can now be entered by pressing the numeric keys, the same way as on a telephone keypad (based on the "Easy Input" patch from Marcel Schaeben). - Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch from "single shot" to "weekly", followed by the "Right" key (reported by Andreas Böttger). - The file 'ca.conf' is obsolete and has been removed. - Revised all descriptions regarding CICAM. - Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling. - Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack() (thanks to Reinhard Nissl). - Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo Schneider). - Cleaned up some trailing white space.
2005-11-27Version 1.3.37vdr-1.3.37Klaus Schmidinger
- Added compiler options "-fPIC -g" to all plugins (thanks to Rolf Ahrenberg). - Fixed initializing the day index when editing the weekday parameter of a repeating timer (thanks to Marco Schlüßler). - No longer removing superfluous hyphens in EPG data - would become too language dependent to handle all kinds of exceptions. - Modified switching to Dolby Digital audio in live mode, if the driver and firmware can handle live DD without the need of a Transfer Mode (thanks to Werner Fink). Live DD mode requires a full featured DVB card and a LinuxDVB driver with firmware version 0x2622 or higher. Older versions will use Transfer Mode just like before. - Implemented handling of the "CA PMT Reply" for CAMs (thanks to Marco Schlüßler for figuring out some obscure length bytes in the CA PMT Reply data of AlphaCrypt CAMs). - Some preparations for being able to record several encrypted channels from the same transponder at the same time (or record and view different encrypted channels), provided the CAM in use can handle this. This is work in progress and isn't actively used, yet. - Fixed SetProgress() in the 'skincurses' plugin in case Total is 0 (reported by Stefan Huelswitt). - Added a copy constructor to cString and fixed its assignment operator (thanks to Holger Brunn). - The new function Skins.QueueMessage() can be called from a background thread to queue a message for display. See VDR/skins.h for details. - The SVDRP command MESG uses the new message queueing facility, so MESG commands may now be executed at any time, and the message will be displayed (no more "pending message").
2005-05-29Version 1.3.25vdr-1.3.25Klaus Schmidinger
- Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Some cable providers don't mark short channel names according to the standard, but rather go their own way and use "name>short name". VDR now splits at this character for cable channels (thanks to Gerhard Steiner for reporting this one). - Added a check for Setup.DiSEqC in cDvbDevice::ProvidesTransponder(), otherwise the EPG scan didn't work on systems that don't use DiSEqC (thanks to Michael Reinelt for reporting this one). - Made the Makefile patch friendlier (thanks to Ludwig Nussel). - Made cOsd::isOpen an integer counter to avoid problems with messages when a cOsdObject uses the raw OSD (thanks to Andreas Regel for reporting this one). - Updated the Danish OSD texts (thanks to Mogens Elneff). - The file 'summary.vdr' has been replaced with 'info.vdr' and now contains the information about a recording, in the same format as the events are stored in 'epg.data' (see man vdr(5) for details). Existing summary files can be converted to the new format by running the Perl script 'summary2info.pl', as in summary2info.pl /video (the parameter given has to be the video directory). If there is no 'info.vdr' file for a recording, an attempt is made to read a 'summary.vdr'. - The "Summary" button in the "Recordings" menu has been renamed to "Info", and the page it brings up now shows the recording's information, much like the EPG event page. Therefore it now no longer uses the skin's SetText() function, but rather the SetRecording() function. Skin plugins may need to adjust that function accordingly (see skinsttng.c, for instance). - The SVDRP command LSTR now lists the recording information in the same tagged format as the LSTE command lists the EPG data. - The audio track menu now contains track descriptions when replaying (provided such descriptions were available in the EPG data when the recording was made, and are stored in the info.vdr file). - Avoiding extra blanks at the end of names of instant recordings. - Removed converting byte order on big endian systems from cDvbOsd::Flush(), which, according to Johannes Stezenbach and Paavo Hartikainen, is wrong. - Added cPlayer::DeviceSetVideoDisplayFormat() (thanks to Marco Schlüßler). - No longer saving the setup in case of a fatal error, to keep the volume level from being set to a wrong value (thanks to Marco Schlüßler). - Fixed a possible hangup when ending a replay session while cIndexFile::CatchUp() is waiting (thanks to Marco Schlüßler). - The SVDRP command DELR no longer deletes recordings that are currently being written to by a timer (thanks to Sascha Volkenandt for pointing out this one). - Pressing the "Play" key in live viewing mode now resumes a previous replay session (thanks to Mirko Dölle). - Now dropping EPG events that have a zero start time or duration (thanks to Oliver Endriss). - No longer stopping Transfer Mode or replay immediately when the Power button is pressed (thanks to Rolf Ahrenberg). - Moved the NPTL and UTF-8 checks after the version and help output (thanks to Andreas Kool for pointing out that 'vdr --version' failed on an UTF-8 system). - Made tChannelID::operator==() inline for better performance (thanks to Georg Acher). - Introduced cListBase::count for better performance (thanks to Georg Acher). - cEvent no longer stores the channelID directly, but rather has a pointer to the schedule it is in. - Now using hash tables to speed up cSchedule::GetEvent() (partially based on a patch from Georg Acher). - Avoiding unnecessary calls to getLength() in libsi/si.c, and avoiding the '& 0xff' in CRC32::crc32() of libsi/util.c (thanks to Georg Acher). - Speeded up deleting duplicate channels. - Fixed listing recordings with empty episode names in the LSTR command (thanks to Stefan Huelswitt for pointing this out). - Added cThread::SetPriority() and using it in cSectionHandler::Action() to reduce the priority of the section handler threads (as suggested by Georg Acher).
2005-02-27Version 1.3.22vdr-1.3.22Klaus Schmidinger
- Removed some unneeded code and fixed access to unallocated memory in cEvent::FixEpgBugs() (thanks to Wolfgang Rohdewald). - Avoiding unnecessary calls to SetPid() in cDvbDevice::SetAudioTrackDevice() (thanks to Marco Schlüßler). - No longer calling EnsureAudioTrack() in cDevice::SetChannel() if a Transfer Mode is started, to avoid setting the audio PID on the primary device (thanks to Marco Schlüßler for pointing this out). - Replaced the call to system("sync") in SpinUpDisk() with fdatasync(f) to avoid problems on NPTL systems (thanks to Chris Warren for pointing this out). - Increased POLLTIMEOUTS_BEFORE_DEVICECLEAR in transfer.c to 6 to avoid problems with the larger buffer reserve (thanks to Marco Schlüßler). - Fixed the call to SetVideoFormat() in cDvbDevice::cDvbDevice() (parameter is _bool_). - Added support for setting the video display mode (thanks to Marco Schlüßler). - The new setup option "DVB/Video display format" can be used to define which display format to use for playing wide screen video on a 4:3 tv set. - Changed MAXDPIDS to 16 (8xAC3 + 8xDTS) (thanks to Werner Fink for pointing this out). - Completed Dutch language texts (thanks to Hans Dingemans). - Added 'smi' to the Finnish language codes (thanks to Rolf Ahrenberg). - Fixed ensuring there is a current audio track in case there is only one track (thanks to Werner Fink for reporting this one). - Improved automatic audio track selection. - Keeping the track language codes and descriptions in Transfer Mode (thanks to Luca Olivetti). - Fixed handling repeated kAudio keys. - Improved displaying the the current audio track in the ST:TNG channel display.
2005-01-09Version 1.3.18vdr-1.3.18Klaus Schmidinger
- Removed an unused variable from cTimer::GetWDayFromMDay() (thanks to Wayne Keer for reporting this one). - Some more changes to the 'childTid' handling in cThread (based on suggestions by Stefan Huelswitt). - Fixed the spelling of 'canceling' (thanks to Wayne Keer for reporting this one). - Re-introduced a sleep to cDvbPlayer::Action() to avoid high CPU load in still picture mode (thanks to Reinhard Nissl for reporting this one). - Fixed a possible race condition in generating the DVB device names (thanks to Rainer Zocholl for reporting this one). - Changed the way PES packets are played to allow replay of AC3 sound over the full featured DVB cards (partially based on a patch from Werner Fink). + The new function cDevice::PlayPes() is now called with the complete PES data stream and calls PlayVideo() and PlayAudio() as necessary. + cDevice::PlayVideo() is now only called with actual video PES packets. + cDevice::PlayAudio() is now called with the actual audio PES packets, which can be either "normal" audio or AC3 data. You need at least firmware version 0x261d to replay AC3 sound over a full featured DVB card. This function now has an 'int' return value. + PlayAudio() of derived cDevice classes shall no longer call the base class function. It shall just play the given data as audio. + cPlayer::PlayVideo() and cPlayer::PlayAudio() are now obsolete and have been replaced with cPlayer::PlayPes(). + All StripAudioPackets() functions are now obsolete. The functionality has been moved into cDevice::PlayPes(), where only the video and audio packets that are actually required will be processed. + All audio track handling is now done by cDevice; cTransfer and cDvbPlayer no longer care about audio tracks. cPlayer, however, still has the virtual hooks for audio track handling in order to allow plugins to implement players that have their own idea about this. + cChannel::[AD]pid[12]() have been replaced with cChannel::[AD]pid(int i) to allow access to all available PIDs. - Escaped the '-' and 'ö' characters in the man pages (thanks to Darren Salt for pointing this out). - Completed the Italian OSD texts (thanks to Sean Carlos). - Fixed setting 'synced' in cRemux when recording radio channels (thanks to Laurence Abbott). - Removed the LOCK_THREAD from the LIRC thread (thanks to Ludwig Nussel). - Fixed genfontfile.c (sometimes the character width was wrong, and the codes were shifted one too far to the left). - Fixed the character width and shifted the codes one to the right in all font files. - Renamed font???.c to font???-iso8859-1.c for symmetry. - Switched the character set to iso8859-15 for English, German and Finnish (thanks to Andreas Brugger for reporting the missing Euro sign in iso8859-1). - Added 'channels.conf.terr' entries for Lübeck (thanks to Stefan Hußfeldt). - Fixed a race condition in starting a thread (thanks to Reinhard Nissl for reporting this one). - Replaced non-threadsafe library functions with their threadsafe versions (thanks to Rainer Zocholl for pointing this out). - Other non-threadsafe functions have been replaced by threadsafe classes that hide the actual buffering. In particular these are: readdir() -> cReadDir readline() -> cReadLine - Several formerly non-threadsafe functions now have a return type of cString: cChannel::ToText() tChannelID::ToString() cEvent::GetDateString() cEvent::GetTimeString() cEvent::GetEndTimeString() cEvent::GetVpsString() cMark::ToText() cTimer::ToText() cSource::ToString() cTimer::PrintDay() cTimer::PrintFirstDay() PrefixVideoFileName() IndexToHMSF() ChannelString() strescape() AddDirectory() itoa() WeekDayName() DayDateTime() When using these functions in a 'const char *' context there is nothing special to consider, except that you can no longer have a pointer to the return value, as in const char *date = DayDateTime(); Although this will compile without error message, the resulting 'date' will not be valid after this line. Use this instead: cString date = DayDateTime(); In a 'const void *' context (as in printf() etc.) the result needs to be dereferenced with a '*', as in printf("%s", *DayDateTime()); to make it a 'const char *'. - Removed delay_ms(), using cCondWait::SleepMs() instead. - Replaced time_ms() with a threadsafe and non-overflowing cTimeMs (thanks to Rainer Zocholl for pointing out this problem). - Added cDevice::mutexReceiver to avoid a race condition when attaching/detaching receivers from different threads. - The new remote control button "Audio" can be used to switch between different audio tracks. The "Green" button in the "Main" menu has been changed from "Language" to "Audio", since it now also controls switching between normal and Dolby Digital audio tracks (see MANUAL for details). - The description of the audio tracks is now taken from the "component descriptors" that are broadcast in the EPG data. However (as no big surprise), not all channels actually provide useful data here, so there are now some additional EPG bugfixes, which can be activated by setting the "EPG bugfix level" to 3. - The format of the 'epg.data' files has been extended by the new tag 'X', which contains the stream components of an event (see man vdr(5) for details). - The cStatus class now has the new member function SetAudioTrack(), which can be used to get notified when the audio track has been switched, and the new member function SetAudioChannel() which is called when the audio channel is changed. - Skins need to implement the new cSkinDisplayTrack class to display the audio track menu. - The ST:TNG skin now displays the current audio track description (if any) at the botton left side. - The new setup option "DVB/Audio languages" can be used to control which audio language shall be selected in case a channel broadcasts in different languages (see MANUAL for details). - The "Left" and "Right" keys in the "Audio" menu can be used to switch between the left and right stereo channels in case there are different audio tracks in these channels (see MANUAL for details). - Fixed a possible race condition in cDevice::Action() (thanks to Mattias Grönlund). - Fixed the default quality value when grabbing a JPEG image (thanks to Patrick Gleichmann). - Fixed deleting a menu item in case the next item is not selectable (thanks to Dino Ravnic). - Implemented displaying mandatory subtitles in the SPU decoder (thanks to Marco Schlüßler). - The setup option "Recording/Record Dolby Digital" has been renamed and moved to "DVB/Use Dolby Digital". It now controls whether Dolby Digital is recorded and whether an available DD audio track will appear in the "Audio" menu. - Added support for circular polarization (thanks to Jonan Santiago). - Thanks to Werner Fink, Reinhard Nissl, Sascha Volkenandt and Bjørnar Nilsen for their support in testing and fine tuning this version.
2004-05-31Version 1.3.9vdr-1.3.9Klaus Schmidinger
- Completed Croatian language texts (thanks to Drazen Dupor). - New iso8859-2 font to fix the problem with program freezes (thanks to Drazen Dupor). - Implemented a default cRemote::Initialize() that waits 10 seconds for a keypress in order to prevent a "hangup" in case, e.g., the LIRC driver is not loaded (thanks to Helmut Auer). - Updated 'channels.conf.terr' for Hannover (thanks to Peter Waechtler). - cBitmap::DrawBitmap() now also resets the palette if the entire bitmap area is covered (suggested by Sascha Volkenandt). - Fixed setting the title in the replay display of the "Classic VDR" skin in case a shorter title is set after a longer one (thanks to Stefan Huelswitt for reporting this one). - Now using more separate areas in the "ST:TNG Panels" skin to allow a theme to use more independent clrMenu* colors. - Fixed removing the "scanning recordings..." message in case the video directory is empty (thanks to Andreas Regel for reporting this one). - Added SetMessage() functions to the Replay and Channel skin functions. Plugins that implement skins will need to implement these functions. This fixes a missing "Editing process finished" message (thanks to Oliver Endriss for reporting this one). - Fixed the height of the channel display in the "Classic VDR" skin. - Fixed handling descriptor loops in 'libsi', which had sometimes caused invalid CA ids to be added to the channel definitions (thanks to Wayne Keer for reporting this one, and Marcel Wiesweg for fixing it). - Fixed handling colors in cDvbSpuPalette::yuv2rgb() (thanks to Marco Schlüßler). - Made some functions of cFont virtual to allow implementing dummy fonts for the 'curses' skin. - The new plugin 'skincurses' re-implements the functionality that was previously available by compiling VDR with DEBUG_OSD. Some things may not yet work as they should, but it's a starting point.
2004-05-23Version 1.3.8vdr-1.3.8Klaus Schmidinger
- Fixed a crash when switching the skin and having selected a non-default theme that is not available for the newly selected skin (thanks to Sascha Volkenandt for reporting this one). - Fixed some issues with gcc 3.4 (thanks to Prakash K. Cheemplavam and Marcel Wiesweg). - Added a hint to PLUGINS.html about how to name a plugin that implements a skin. - Completed the Finnish OSD texts (thanks to Rolf Ahrenberg). - Single shot timers and events now show the day of week (adopted with some changes from the "elchi" patch, orginally introduced by Oskar Signell). Plugins that use cEvent::GetDateString() should note that this function now returns a longer string, including the day of week. The new function const char *WeekDayName(time_t t) can be called with a time_t value to get the day of week for that time. - When processing XPM data, the color name "None" is now mapped to #00000000, which is "fully transparent" (suggested by Sascha Volkenandt). - Fixed the OSD alignment in the SPU decoder (thanks to Miko Wohlgemuth for reporting this one and helping to test the fix). - Fixed freezing picture when a recording starts on a system that always uses 'Transfer Mode' (thanks to Michal Dobrzynski for reporting this one). - Fixed a memory leak in NIT processing (thanks to Marcel Wiesweg). - Added a few missing initializations (thanks to Marcel Wiesweg). - Moved the declaration of cMenuText to VDR/menu.h to make it available to plugins. It now also has a SetText() function that can be used to dynamically set the text in an already existing cMenuText (both suggested by Stefan Huelswitt). - Added play mode pmVideoOnly (thanks to Marcel Wiesweg). - Added a missing cStatus::MsgOsdClear() to cDisplayChannel::~cDisplayChannel() (thanks to Oliver Endriss). - No longer displaying unused color buttons in the "Classic VDR" skin (thanks to Oliver Endriss for reporting this one). - Added some missing cStatus::MsgOsdTextItem() calls (thanks to Oliver Endriss for reporting this one).
2004-05-16Version 1.3.7vdr-1.3.7Klaus Schmidinger
- Fixed a memory leak in thread handling when using NPTL (thanks to Jon Burgess). - Fixed handling Setup.RecordDolbyDigital, which was broken since version 1.1.6. - Fixed handling text lengths for itemized EPG texts (thanks to Marcel Wiesweg). - Fixed the help for LSTE and LSTR (was broken in 1.3.6). - Improved iso8859-7 fonts (thanks to Dimitrios Dimitrakos). - Added some 3-letter language codes (thanks to Marcus Mönnig). - Added language code handling to the subtitling descriptor in 'libsi' (thanks to Pekka Virtanen). - Moved several menu item classes from menu.c to menuitems.[hc] to make them available for plugins. - The epg2html.pl script now handles '|' in description texts. - The new setup option "OSD/Use small font" can be used to control the use of the small font (see MANUAL for details). - Swapped osd.[hc] and osdbase.[hc] to have the virtual OSD base class named cOsd. Plugins may need to adjust their #include statements. - Colors are now given as AARRGGBB instead of AABBGGRR. The values are mapped to the driver's (wrong) sequence in dvbosd.c (this should really be fixed in the driver, together with the endian problem). - The new OSD setup parameters "Left" and "Top" can be used to define the top left corner of the OSD. - The OSD size parameters are now in pixel (as opposed to formerly characters). When reading a 'setup.conf' file from an older version of VDR, the OSDwidth and OSDheight values will be converted to pixel automatically. - The OSD is now fully device independent. See the comments in VDR/osd.h and the description in PLUGINS.html for information on how a plugin can implement an OSD display on arbitrary hardware. - The OSD (actually its cBitmap class) can now handle XPM files. There are several XPM files in the VDR/symbols directory which can be used by skins (some of these have been taken from the "elchi" patch). See VDR/skinsttng.c for examples on how to use these. - Due to the changes in the OSD handling the DEBUG_OSD option for a textual OSD has been dropped. There will be a plugin that implements a skin with this functionality later. - The entire OSD display can now be implemented via "skins". See VDR/skins.[hc], VDR/skinclassic.[hc], VDR/skinsttng.[hc] and PLUGINS.html for information on how a plugin can implement its own skin. By default VDR comes with a "Classic" skin that implements the OSD display known from previous versions, and the new skin named "ST:TNG Panels", which is also the default skin now. The actual skin can be selected through "Setup/OSD/Skin". - The colors used in a skin can now be configured using "themes". See PLUGINS.html for information on how a skin can make use of themes, and man vdr(5) for the structure of a theme file. The actual theme to use can be selected through "Setup/OSD/Theme". - Added Croatian language texts (thanks to Drazen Dupor). NOTE: there is apparently a problem with the newly introduced iso8859-2 font, because as soon as Setup/OSD/Language is set to Croatian (currently the last one in the list) everything freezes and the vdr processes have to be killed with -9 and the driver needs to be reloaded. Maybe somebody else can find out what's going wrong here... - Added missing NULL checks when accessing sectionHandler in device.c (thanks to Pekka Virtanen). - Fixed setting the time from the DVB data stream (thanks to Helmut Auer for pointing out a frequency/transponder handling mixup). This now also takes the actual source (sat, cable etc.) into account. Please go into "Setup/EPG" and set the "Set system time" and "Use time from transponder" parameters accordingly (this is necessary even if you have already set them before!).