| Age | Commit message (Collapse) | Author |
|---|
|
- Fixed handling second audio and Dolby Digital PIDs for encrypted channels
(was broken in version 1.3.37).
- Improved TS/PES conversion to better handle lost TS packets (thanks to
Reinhard Nissl).
- Limited the frequency of log messages from the cRepackers.
- Now using the gettid() syscall to get a thread's pid, so that we get a
useful value on NPTL systems (suggested by Johannes Stezenbach).
- Fixed the RCU remote control handling to avoid problems with NPTL (thanks
to Andreas Share for reporting a lockup with the RCU on NPTL systems).
- When displaying the amount of free disk space, the space consumed by
recordings that have been "deleted" but not yet actually "removed" is now
taken into account (suggested by Christian Vogt).
- Now avoiding unnecessary disk access when checking if there are deleted
recordings that need to be removed (reported by Carsten Koch).
- Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now
a deleted recording is retained at least DELETEDLIFETIME seconds before
actually removing it.
The value of DELETEDLIFETIME has been changed to 300. So after (possibly
inadvertently) deleting a recording, there will be at least 5 minutes
in which it can be recovered (unless a new recording immediately requires
the disk space). The count starts again at 0 every time VDR is started.
- Fixed a possible crash when displaying the "Low disk space!" message from
a background thread (thanks to Christof Steininger).
- Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler).
- Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground
and background threads won't interfere.
- The main menu now dynamically updates its contents in case an instant
recording or replay stops, etc.
- The version number of EPG events is now also stored in the epg.data file
(thanks to Kendy Kutzner).
- EPG events that are no longer in the currently broadcasted data stream are
now automatically deleted.
- Removed an invalid access to Event->schedule in cSchedule::DelEvent().
- Modified cSchedule::Cleanup() (events are always sorted by time).
- Schedules are now cleaned up once every hour (not only at 05:00).
- The "Schedule" and "What's on now/next?" menus are now updated if a timer
is set or modified.
- cTimer no longer has its own 'schedule' member, it rather uses that of the
event it has been set to.
- The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus
now immediately creates a timer for the selected event and marks it with 'T'.
If the event is already marked with 'T', the "Red" button opens the "Edit
timer" menu for that timer.
- Removing deleted recordings is now done in a separate thread.
- Dropped the unused "stop recording on primary interface" stuff.
- Converting a grabbed image to JPEG is now done with the new function
RgbToJpeg() (see tools.h).
- The SVDRP command GRAB now determines the image type (JPEG or PNM) from the
extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit
'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but
has no meaning any more.
- The function cDevice::GrabImage() no longer writes the grabbed image to a
file, but rather returns a pointer to the image in memory. The wrapper
function cDevice::GrabImageFile() can be used to write the grabbed image
directly to a file. Plugins that used the old version of cDevice::GrabImage()
need to be adapted to the new interface.
- The new class cBase64Encoder (see tools.h) can be used to encode data in
base64 (thanks to Bob Withers for publishing his Base64 class).
- The SVDRP command GRAB now writes the image data to the SVDRP connection
(encoded in base64) if the given file name consists of only the file
extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file
name (based on a suggestion from Darren Salt).
A simple way of viewing a grabbed image on a remote host is:
svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display -
- The new command line option '-g' must be given if the SVDRP command GRAB
shall be allowed to write image files to disk. The parameter to this option
must be the full path name of an existing directory, without any "..", double
'/' or symlinks. By default, or if "-g- is given, grabbing to files is
not allowed any more because of potential security risks.
- Modified the way the SVDRP command GRAB writes the grabbed image to a file
to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino
Peña):
+ The file handle is now opened in a way that it won't follow symbolic links
(suggested by Darren Salt).
+ The given file name is now canonicalized, so that it won't contain any
".." or symlinks (suggested by Darren Salt).
+ Grabbing to files is limited to the directory given in the the command
line option '-g'. By default grabbing to files is not allowed any more.
- Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos).
- Changed all "illegal" to "invalid" in error messages (there's nothing "illegal"
in VDR ;-).
- When started as user 'root' VDR now switches to a lesser privileged user id,
keeping the capability to set the system time (based on a patch from Ludwig
Nussel). By default the user id 'vdr' is used, which can be changed through
the new command line option '-u'. Note that for security reasons VDR will no
longer run as user 'root' (unless you explicitly start it with '-u root',
but this is not recommended!). The 'runvdr' script has been changed to
use the '-u' option.
- Changed the API of the functions cStatus::Recording() and cStatus::Replaying(),
so that they can provide the full file name of the recording. Plugins that use
these (or the related cStatus::Msg...() functions) need to be adapted
(suggested by Andreas Brugger).
- The DVB devices now retune (and, if applicable, resend the DiSEqC data) if
the lock is lost (based on a patch from Reinhard Nissl).
- Fixed handling multi byte key sequences in cKbdRemote (based on a patch from
Jürgen Schneider).
- Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco
Schlüßler).
- Made the static cControl functions thread safe (thanks to Patrick Fischer).
- Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid
warnings with g++ 4.1.0 (thanks to Ville Skyttä).
- Fixed incrementing the 'state' variables in the repacker classes in remux.c
to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä).
- The Makefile now reports a summary of failed plugins (thanks to Udo Richter).
- The cTimer constructor can now take an optional cChannel (suggested by
Patrick Fischer).
- Fixed setting the main thread id if VDR is running as a daemon.
- Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl).
- Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner).
- Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger).
- Now using FE_READ_STATUS to read the current frontend status (suggested by
Holger Wächtler).
- The "Menu" key now behaves consistently. If there is anything on the OSD, it
is closed when the "Menu" key is pressed, and if there is nothing on the OSD,
the "Menu" key opens the main menu (suggested by Luca Olivetti).
- The new option "Setup/OSD/Timeout requested channel info" can be used to turn
off the automatic timeout of the channel display in case it was invoked by
a press of the "Ok" key (suggested by Thiemo Gehrke).
- A message is now given when an instant recording is started (suggested by
Helmut Auer). Actually the code was already there, just commented out - don't
remember why it wasn't active...
- Removed an obsolete "Summary" text from i18n.c and preceded all key definition
texts with "Key$" to avoid duplicates (reported by Lucian Muresan).
- Preceded all button texts with "Button$".
- Removed obsolete "Eject", "Language" and "scanning recordings..." texts.
- Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill).
- Disabled the use of "fadvise" in cUnbufferedFile because there have been
several reports that it causes more problems than it solves (suggested by
Petri Hintukainen). If you want to use "fadvise", you can activate the line
//#define USE_FADVISE
in tools.c.
- Removed unused 'offset' member from cOsdItem.
- In the "Channels" menu the numeric keys now position the cursor to the channel
with the given number (see MANUAL, section "Remote Control Keys", note (3) for
details).
- The "Mark/Move" function in the "Channels" menu now also works in the non-numeric
sort modes.
- The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if
this is a menu.
- The new "Info" key brings up information on the currently viewed programme
or recording. For a live programme this is the same as "Schedule/Ok", i.e. the
description of the current EPG event. For a recording this is the same as shown
by the "Info" button in the "Recordings" menu. Plugins that implement players
can overwrite their cControl::GetInfo() function to show their own info (see
PLUGINS.html for details). Pressing the "Info" key again while the info is
displayed will close the OSD. In order to assign this new key to an existing
remote control setup, the remote.conf file needs to be deleted and VDR has
to be restarted to go through the process of learning the remote control keys.
- Any cReceivers still attached to a cDevice when that device switches to a
different transponder are now automatically detached (suggested by Patrick
Fischer).
- The "flags" of a timer are now handled as an unsigned integer value. In order
to do this, the interface of cMenuEditBitItem also had to be changed.
- In string entry fields (like, e.g., the file name of a recording) the characters
can now be entered by pressing the numeric keys, the same way as on a
telephone keypad (based on the "Easy Input" patch from Marcel Schaeben).
- Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch
from "single shot" to "weekly", followed by the "Right" key (reported by
Andreas Böttger).
- The file 'ca.conf' is obsolete and has been removed.
- Revised all descriptions regarding CICAM.
- Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling.
- Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack()
(thanks to Reinhard Nissl).
- Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo
Schneider).
- Cleaned up some trailing white space.
|
|
- Added compiler options "-fPIC -g" to all plugins (thanks to Rolf Ahrenberg).
- Fixed initializing the day index when editing the weekday parameter of a
repeating timer (thanks to Marco Schlüßler).
- No longer removing superfluous hyphens in EPG data - would become too
language dependent to handle all kinds of exceptions.
- Modified switching to Dolby Digital audio in live mode, if the driver
and firmware can handle live DD without the need of a Transfer Mode (thanks
to Werner Fink). Live DD mode requires a full featured DVB card and a
LinuxDVB driver with firmware version 0x2622 or higher. Older versions will
use Transfer Mode just like before.
- Implemented handling of the "CA PMT Reply" for CAMs (thanks to Marco
Schlüßler for figuring out some obscure length bytes in the CA PMT Reply
data of AlphaCrypt CAMs).
- Some preparations for being able to record several encrypted channels from
the same transponder at the same time (or record and view different encrypted
channels), provided the CAM in use can handle this. This is work in progress
and isn't actively used, yet.
- Fixed SetProgress() in the 'skincurses' plugin in case Total is 0 (reported
by Stefan Huelswitt).
- Added a copy constructor to cString and fixed its assignment operator
(thanks to Holger Brunn).
- The new function Skins.QueueMessage() can be called from a background thread
to queue a message for display. See VDR/skins.h for details.
- The SVDRP command MESG uses the new message queueing facility, so MESG
commands may now be executed at any time, and the message will be displayed
(no more "pending message").
|
|
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Some cable providers don't mark short channel names according to the standard,
but rather go their own way and use "name>short name". VDR now splits at this
character for cable channels (thanks to Gerhard Steiner for reporting this one).
- Added a check for Setup.DiSEqC in cDvbDevice::ProvidesTransponder(), otherwise
the EPG scan didn't work on systems that don't use DiSEqC (thanks to Michael
Reinelt for reporting this one).
- Made the Makefile patch friendlier (thanks to Ludwig Nussel).
- Made cOsd::isOpen an integer counter to avoid problems with messages when a
cOsdObject uses the raw OSD (thanks to Andreas Regel for reporting this one).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- The file 'summary.vdr' has been replaced with 'info.vdr' and now contains the
information about a recording, in the same format as the events are stored in
'epg.data' (see man vdr(5) for details). Existing summary files can be converted
to the new format by running the Perl script 'summary2info.pl', as in
summary2info.pl /video
(the parameter given has to be the video directory). If there is no 'info.vdr'
file for a recording, an attempt is made to read a 'summary.vdr'.
- The "Summary" button in the "Recordings" menu has been renamed to "Info", and
the page it brings up now shows the recording's information, much like the EPG
event page. Therefore it now no longer uses the skin's SetText() function, but
rather the SetRecording() function. Skin plugins may need to adjust that function
accordingly (see skinsttng.c, for instance).
- The SVDRP command LSTR now lists the recording information in the same tagged
format as the LSTE command lists the EPG data.
- The audio track menu now contains track descriptions when replaying (provided
such descriptions were available in the EPG data when the recording was made,
and are stored in the info.vdr file).
- Avoiding extra blanks at the end of names of instant recordings.
- Removed converting byte order on big endian systems from cDvbOsd::Flush(),
which, according to Johannes Stezenbach and Paavo Hartikainen, is wrong.
- Added cPlayer::DeviceSetVideoDisplayFormat() (thanks to Marco Schlüßler).
- No longer saving the setup in case of a fatal error, to keep the volume level
from being set to a wrong value (thanks to Marco Schlüßler).
- Fixed a possible hangup when ending a replay session while cIndexFile::CatchUp()
is waiting (thanks to Marco Schlüßler).
- The SVDRP command DELR no longer deletes recordings that are currently being
written to by a timer (thanks to Sascha Volkenandt for pointing out this one).
- Pressing the "Play" key in live viewing mode now resumes a previous replay
session (thanks to Mirko Dölle).
- Now dropping EPG events that have a zero start time or duration (thanks to
Oliver Endriss).
- No longer stopping Transfer Mode or replay immediately when the Power button
is pressed (thanks to Rolf Ahrenberg).
- Moved the NPTL and UTF-8 checks after the version and help output (thanks to
Andreas Kool for pointing out that 'vdr --version' failed on an UTF-8 system).
- Made tChannelID::operator==() inline for better performance (thanks to Georg
Acher).
- Introduced cListBase::count for better performance (thanks to Georg Acher).
- cEvent no longer stores the channelID directly, but rather has a pointer to
the schedule it is in.
- Now using hash tables to speed up cSchedule::GetEvent() (partially based on
a patch from Georg Acher).
- Avoiding unnecessary calls to getLength() in libsi/si.c, and avoiding the
'& 0xff' in CRC32::crc32() of libsi/util.c (thanks to Georg Acher).
- Speeded up deleting duplicate channels.
- Fixed listing recordings with empty episode names in the LSTR command (thanks
to Stefan Huelswitt for pointing this out).
- Added cThread::SetPriority() and using it in cSectionHandler::Action() to
reduce the priority of the section handler threads (as suggested by Georg Acher).
|
|
- Removed some unneeded code and fixed access to unallocated memory in
cEvent::FixEpgBugs() (thanks to Wolfgang Rohdewald).
- Avoiding unnecessary calls to SetPid() in cDvbDevice::SetAudioTrackDevice()
(thanks to Marco Schlüßler).
- No longer calling EnsureAudioTrack() in cDevice::SetChannel() if a Transfer Mode is
started, to avoid setting the audio PID on the primary device (thanks to Marco
Schlüßler for pointing this out).
- Replaced the call to system("sync") in SpinUpDisk() with fdatasync(f) to avoid
problems on NPTL systems (thanks to Chris Warren for pointing this out).
- Increased POLLTIMEOUTS_BEFORE_DEVICECLEAR in transfer.c to 6 to avoid problems
with the larger buffer reserve (thanks to Marco Schlüßler).
- Fixed the call to SetVideoFormat() in cDvbDevice::cDvbDevice() (parameter is _bool_).
- Added support for setting the video display mode (thanks to Marco Schlüßler).
- The new setup option "DVB/Video display format" can be used to define which display
format to use for playing wide screen video on a 4:3 tv set.
- Changed MAXDPIDS to 16 (8xAC3 + 8xDTS) (thanks to Werner Fink for pointing this out).
- Completed Dutch language texts (thanks to Hans Dingemans).
- Added 'smi' to the Finnish language codes (thanks to Rolf Ahrenberg).
- Fixed ensuring there is a current audio track in case there is only one track
(thanks to Werner Fink for reporting this one).
- Improved automatic audio track selection.
- Keeping the track language codes and descriptions in Transfer Mode (thanks to
Luca Olivetti).
- Fixed handling repeated kAudio keys.
- Improved displaying the the current audio track in the ST:TNG channel display.
|
|
- Removed an unused variable from cTimer::GetWDayFromMDay() (thanks to Wayne Keer
for reporting this one).
- Some more changes to the 'childTid' handling in cThread (based on suggestions by
Stefan Huelswitt).
- Fixed the spelling of 'canceling' (thanks to Wayne Keer for reporting this one).
- Re-introduced a sleep to cDvbPlayer::Action() to avoid high CPU load in still
picture mode (thanks to Reinhard Nissl for reporting this one).
- Fixed a possible race condition in generating the DVB device names (thanks to
Rainer Zocholl for reporting this one).
- Changed the way PES packets are played to allow replay of AC3 sound over the
full featured DVB cards (partially based on a patch from Werner Fink).
+ The new function cDevice::PlayPes() is now called with the complete PES data
stream and calls PlayVideo() and PlayAudio() as necessary.
+ cDevice::PlayVideo() is now only called with actual video PES packets.
+ cDevice::PlayAudio() is now called with the actual audio PES packets, which
can be either "normal" audio or AC3 data. You need at least firmware version
0x261d to replay AC3 sound over a full featured DVB card. This function now
has an 'int' return value.
+ PlayAudio() of derived cDevice classes shall no longer call the base class
function. It shall just play the given data as audio.
+ cPlayer::PlayVideo() and cPlayer::PlayAudio() are now obsolete and have been
replaced with cPlayer::PlayPes().
+ All StripAudioPackets() functions are now obsolete. The functionality has been
moved into cDevice::PlayPes(), where only the video and audio packets that are
actually required will be processed.
+ All audio track handling is now done by cDevice; cTransfer and cDvbPlayer no
longer care about audio tracks. cPlayer, however, still has the virtual hooks
for audio track handling in order to allow plugins to implement players that
have their own idea about this.
+ cChannel::[AD]pid[12]() have been replaced with cChannel::[AD]pid(int i) to
allow access to all available PIDs.
- Escaped the '-' and 'ö' characters in the man pages (thanks to Darren Salt for
pointing this out).
- Completed the Italian OSD texts (thanks to Sean Carlos).
- Fixed setting 'synced' in cRemux when recording radio channels (thanks to
Laurence Abbott).
- Removed the LOCK_THREAD from the LIRC thread (thanks to Ludwig Nussel).
- Fixed genfontfile.c (sometimes the character width was wrong, and the codes were
shifted one too far to the left).
- Fixed the character width and shifted the codes one to the right in all font
files.
- Renamed font???.c to font???-iso8859-1.c for symmetry.
- Switched the character set to iso8859-15 for English, German and Finnish (thanks
to Andreas Brugger for reporting the missing Euro sign in iso8859-1).
- Added 'channels.conf.terr' entries for Lübeck (thanks to Stefan Hußfeldt).
- Fixed a race condition in starting a thread (thanks to Reinhard Nissl for
reporting this one).
- Replaced non-threadsafe library functions with their threadsafe versions (thanks
to Rainer Zocholl for pointing this out).
- Other non-threadsafe functions have been replaced by threadsafe classes that hide
the actual buffering. In particular these are:
readdir() -> cReadDir
readline() -> cReadLine
- Several formerly non-threadsafe functions now have a return type of cString:
cChannel::ToText()
tChannelID::ToString()
cEvent::GetDateString()
cEvent::GetTimeString()
cEvent::GetEndTimeString()
cEvent::GetVpsString()
cMark::ToText()
cTimer::ToText()
cSource::ToString()
cTimer::PrintDay()
cTimer::PrintFirstDay()
PrefixVideoFileName()
IndexToHMSF()
ChannelString()
strescape()
AddDirectory()
itoa()
WeekDayName()
DayDateTime()
When using these functions in a 'const char *' context there is nothing special
to consider, except that you can no longer have a pointer to the return value,
as in
const char *date = DayDateTime();
Although this will compile without error message, the resulting 'date' will not
be valid after this line. Use this instead:
cString date = DayDateTime();
In a 'const void *' context (as in printf() etc.) the result needs to be
dereferenced with a '*', as in
printf("%s", *DayDateTime());
to make it a 'const char *'.
- Removed delay_ms(), using cCondWait::SleepMs() instead.
- Replaced time_ms() with a threadsafe and non-overflowing cTimeMs (thanks to Rainer
Zocholl for pointing out this problem).
- Added cDevice::mutexReceiver to avoid a race condition when attaching/detaching
receivers from different threads.
- The new remote control button "Audio" can be used to switch between different
audio tracks. The "Green" button in the "Main" menu has been changed from "Language"
to "Audio", since it now also controls switching between normal and Dolby Digital
audio tracks (see MANUAL for details).
- The description of the audio tracks is now taken from the "component descriptors"
that are broadcast in the EPG data. However (as no big surprise), not all channels
actually provide useful data here, so there are now some additional EPG bugfixes,
which can be activated by setting the "EPG bugfix level" to 3.
- The format of the 'epg.data' files has been extended by the new tag 'X', which
contains the stream components of an event (see man vdr(5) for details).
- The cStatus class now has the new member function SetAudioTrack(), which can be
used to get notified when the audio track has been switched, and the new member
function SetAudioChannel() which is called when the audio channel is changed.
- Skins need to implement the new cSkinDisplayTrack class to display the audio
track menu.
- The ST:TNG skin now displays the current audio track description (if any) at the
botton left side.
- The new setup option "DVB/Audio languages" can be used to control which audio
language shall be selected in case a channel broadcasts in different languages
(see MANUAL for details).
- The "Left" and "Right" keys in the "Audio" menu can be used to switch between
the left and right stereo channels in case there are different audio tracks
in these channels (see MANUAL for details).
- Fixed a possible race condition in cDevice::Action() (thanks to Mattias Grönlund).
- Fixed the default quality value when grabbing a JPEG image (thanks to Patrick
Gleichmann).
- Fixed deleting a menu item in case the next item is not selectable (thanks to
Dino Ravnic).
- Implemented displaying mandatory subtitles in the SPU decoder (thanks to Marco
Schlüßler).
- The setup option "Recording/Record Dolby Digital" has been renamed and moved to
"DVB/Use Dolby Digital". It now controls whether Dolby Digital is recorded and
whether an available DD audio track will appear in the "Audio" menu.
- Added support for circular polarization (thanks to Jonan Santiago).
- Thanks to Werner Fink, Reinhard Nissl, Sascha Volkenandt and Bjørnar Nilsen for
their support in testing and fine tuning this version.
|
|
- Completed Croatian language texts (thanks to Drazen Dupor).
- New iso8859-2 font to fix the problem with program freezes (thanks to Drazen Dupor).
- Implemented a default cRemote::Initialize() that waits 10 seconds for a keypress
in order to prevent a "hangup" in case, e.g., the LIRC driver is not loaded (thanks
to Helmut Auer).
- Updated 'channels.conf.terr' for Hannover (thanks to Peter Waechtler).
- cBitmap::DrawBitmap() now also resets the palette if the entire bitmap area is
covered (suggested by Sascha Volkenandt).
- Fixed setting the title in the replay display of the "Classic VDR" skin in case
a shorter title is set after a longer one (thanks to Stefan Huelswitt for
reporting this one).
- Now using more separate areas in the "ST:TNG Panels" skin to allow a theme to
use more independent clrMenu* colors.
- Fixed removing the "scanning recordings..." message in case the video directory
is empty (thanks to Andreas Regel for reporting this one).
- Added SetMessage() functions to the Replay and Channel skin functions. Plugins
that implement skins will need to implement these functions. This fixes a missing
"Editing process finished" message (thanks to Oliver Endriss for reporting this
one).
- Fixed the height of the channel display in the "Classic VDR" skin.
- Fixed handling descriptor loops in 'libsi', which had sometimes caused invalid
CA ids to be added to the channel definitions (thanks to Wayne Keer for reporting
this one, and Marcel Wiesweg for fixing it).
- Fixed handling colors in cDvbSpuPalette::yuv2rgb() (thanks to Marco Schlüßler).
- Made some functions of cFont virtual to allow implementing dummy fonts for the
'curses' skin.
- The new plugin 'skincurses' re-implements the functionality that was previously
available by compiling VDR with DEBUG_OSD. Some things may not yet work as they
should, but it's a starting point.
|
|
- Fixed a crash when switching the skin and having selected a non-default theme
that is not available for the newly selected skin (thanks to Sascha Volkenandt
for reporting this one).
- Fixed some issues with gcc 3.4 (thanks to Prakash K. Cheemplavam and Marcel
Wiesweg).
- Added a hint to PLUGINS.html about how to name a plugin that implements a skin.
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Single shot timers and events now show the day of week (adopted with some changes
from the "elchi" patch, orginally introduced by Oskar Signell). Plugins that use
cEvent::GetDateString() should note that this function now returns a longer
string, including the day of week. The new function const char *WeekDayName(time_t t)
can be called with a time_t value to get the day of week for that time.
- When processing XPM data, the color name "None" is now mapped to #00000000, which
is "fully transparent" (suggested by Sascha Volkenandt).
- Fixed the OSD alignment in the SPU decoder (thanks to Miko Wohlgemuth for reporting
this one and helping to test the fix).
- Fixed freezing picture when a recording starts on a system that always uses
'Transfer Mode' (thanks to Michal Dobrzynski for reporting this one).
- Fixed a memory leak in NIT processing (thanks to Marcel Wiesweg).
- Added a few missing initializations (thanks to Marcel Wiesweg).
- Moved the declaration of cMenuText to VDR/menu.h to make it available to plugins.
It now also has a SetText() function that can be used to dynamically set the text
in an already existing cMenuText (both suggested by Stefan Huelswitt).
- Added play mode pmVideoOnly (thanks to Marcel Wiesweg).
- Added a missing cStatus::MsgOsdClear() to cDisplayChannel::~cDisplayChannel()
(thanks to Oliver Endriss).
- No longer displaying unused color buttons in the "Classic VDR" skin (thanks to
Oliver Endriss for reporting this one).
- Added some missing cStatus::MsgOsdTextItem() calls (thanks to Oliver Endriss for
reporting this one).
|
|
- Fixed a memory leak in thread handling when using NPTL (thanks to Jon Burgess).
- Fixed handling Setup.RecordDolbyDigital, which was broken since version 1.1.6.
- Fixed handling text lengths for itemized EPG texts (thanks to Marcel Wiesweg).
- Fixed the help for LSTE and LSTR (was broken in 1.3.6).
- Improved iso8859-7 fonts (thanks to Dimitrios Dimitrakos).
- Added some 3-letter language codes (thanks to Marcus Mönnig).
- Added language code handling to the subtitling descriptor in 'libsi' (thanks to
Pekka Virtanen).
- Moved several menu item classes from menu.c to menuitems.[hc] to make them
available for plugins.
- The epg2html.pl script now handles '|' in description texts.
- The new setup option "OSD/Use small font" can be used to control the use of
the small font (see MANUAL for details).
- Swapped osd.[hc] and osdbase.[hc] to have the virtual OSD base class named cOsd.
Plugins may need to adjust their #include statements.
- Colors are now given as AARRGGBB instead of AABBGGRR. The values are mapped to
the driver's (wrong) sequence in dvbosd.c (this should really be fixed in the
driver, together with the endian problem).
- The new OSD setup parameters "Left" and "Top" can be used to define the top left
corner of the OSD.
- The OSD size parameters are now in pixel (as opposed to formerly characters).
When reading a 'setup.conf' file from an older version of VDR, the OSDwidth
and OSDheight values will be converted to pixel automatically.
- The OSD is now fully device independent. See the comments in VDR/osd.h and the
description in PLUGINS.html for information on how a plugin can implement an OSD
display on arbitrary hardware.
- The OSD (actually its cBitmap class) can now handle XPM files. There are several
XPM files in the VDR/symbols directory which can be used by skins (some of these
have been taken from the "elchi" patch). See VDR/skinsttng.c for examples on how
to use these.
- Due to the changes in the OSD handling the DEBUG_OSD option for a textual OSD
has been dropped. There will be a plugin that implements a skin with this
functionality later.
- The entire OSD display can now be implemented via "skins". See VDR/skins.[hc],
VDR/skinclassic.[hc], VDR/skinsttng.[hc] and PLUGINS.html for information on how
a plugin can implement its own skin. By default VDR comes with a "Classic" skin
that implements the OSD display known from previous versions, and the new skin
named "ST:TNG Panels", which is also the default skin now. The actual skin can
be selected through "Setup/OSD/Skin".
- The colors used in a skin can now be configured using "themes". See PLUGINS.html
for information on how a skin can make use of themes, and man vdr(5) for the
structure of a theme file. The actual theme to use can be selected through
"Setup/OSD/Theme".
- Added Croatian language texts (thanks to Drazen Dupor).
NOTE: there is apparently a problem with the newly introduced iso8859-2 font,
because as soon as Setup/OSD/Language is set to Croatian (currently the last one
in the list) everything freezes and the vdr processes have to be killed with -9
and the driver needs to be reloaded. Maybe somebody else can find out what's
going wrong here...
- Added missing NULL checks when accessing sectionHandler in device.c (thanks to
Pekka Virtanen).
- Fixed setting the time from the DVB data stream (thanks to Helmut Auer for
pointing out a frequency/transponder handling mixup). This now also takes the
actual source (sat, cable etc.) into account. Please go into "Setup/EPG" and
set the "Set system time" and "Use time from transponder" parameters accordingly
(this is necessary even if you have already set them before!).
|
