summaryrefslogtreecommitdiff
path: root/svdrp.c
AgeCommit message (Collapse)Author
2006-08-13Version 1.4.1-4vdr-1.4.1-4Klaus Schmidinger
- Fixed converting the port number in the "connect from..." log message of SVDRP (thanks to Ville Skyttä). - Made the cCiSession members sessionId and resourceId uint16_t and uint32_t, respectively, to match their types in the CI session data (thanks to Ville Skyttä for reporting that there are places where ntohs() is assigned to different types). - Changed the way a device is selected for receiving in order to keep devices with CAMs better available, even if this means recording on the primary device (reported by Jörn Reder; thanks to Anssi Hannula for improving handling Transfer Mode devices in this). - No longer stopping removing empty directories if an error occurs (thanks to Oliver Endriss). - Added a log error message to cPlugin::ConfigDirectory() in case a plugin calls it from a separate thread (reported by Udo Richter).
2006-08-06Version 1.4.1-3vdr-1.4.1-3Klaus Schmidinger
- Fixed assigning schedules to channels in case there is no initial EPG information (thanks to Frank Schmirler). - Increased the APIVERSION to allow plugins that relied on the cStatus::MsgSetVolume() bug to react properly (suggested by Stefan Huelswitt). - Fixed cDevice::ToggleMute() (thanks to Christoph Haubrich). - Fixed deleting the last character of a string menu item in insert mode (thanks to Udo Richter). - The /video/.update file is now touched _after_ an editing process is finished in order to avoid excessive disk access (thanks to Artur Skawina). - Fixed handling the running status of EPG events before the currently running one, in case they are added after the current event (cont'd from version 1.4.1-2). - Modified the shutdown mechanism, so that the shutdown script is never given a time in the past (reported by Helmut Auer). If a timer is currently recording, or a recording would start within the next 30 minutes (default for the "Min. event timeout" setup parameter), and the user insists in shutting down now, the reboot time given to the shutdown script will correspond to a time that is "Min. event timeout" minutes (default is 30) in the future. - Avoiding shutdown message "Recording in ... minutes, shut down anyway?" with a negative number of minutes (reported by Udo Richter). - Fixed getting the next active timer when shutting down (thanks to Udo Richter). - Modified the cSVDRP::Close() function to avoid code duplication.
2006-07-23Version 1.4.1-2vdr-1.4.1-2Klaus Schmidinger
- Fixed the Makefile of the 'servicedemo' plugin, so that it defines the PLUGIN macro, which allows the Make.config file to react properly when compiling the plugin (reported by Bernd Melcher). Note to all plugin developers: a plugin's Makefile *must* define the PLUGIN macro, even if it doesn't use it itself! - Added a comment regarding the PLUGIN macro to the 'newplugin' script. - Added '--vfat' to the vdr.1 man page (reported by Udo Richter). - Removed a double fdopen() in cPipe::Open() (reported by Stefan Huelswitt). - Fixed handling the running status of EPG events before the currently running one, in case they are added after the current event. - cEIT::cEIT() now calls pSchedule->SetPresentSeen() even if OnlyRunningStatus is true. - Newlines in title and short text of an EPG event are now changed into blanks only after all other fixes, because a short text might become a description. - Fixed handling network masks in the svdrphosts.conf file (thanks to Patrick Maier). - Fixed handling relative volume settings in the call to cStatus::MsgSetVolume() (reported by Norbert Wentz). - Added a missing initialization of 'mutex' in cCiMenu::cCiMenu() and removed some superfluous semicolons in ci.c (thanks to Marco Schlüßler). - Fixed handling client side termination of SVDRP connections (thanks to Frank Schmirler). - cDevice::GetDevice() now prefers any device that's already receiving and doesn't require detatching receivers (suggested by Anssi Hannula). - Fixed handling numeric keys in the channel display after switching channel groups (thanks to Andreas Regel). - Menu items derived from cMenuEditIntItem now loop though their values if they have a dedicated minimum or maximum limit (suggested by Andy Grobb). Looping is only done for normal keypresses, not for repeated ones. This allows the user to scroll the value all the way to the limit by keeping the key pressed.
2006-06-11Version 1.4.1vdr-1.4.1Klaus Schmidinger
- Changed the log messages when grabbing an image from 'isyslog()' to 'dsyslog()' so that they can be suppressed in normal operation mode to avoid clogging the log file in case this function is used frequently (suggested by Helmut Auer).
2006-06-04Version 1.4.0-3vdr-1.4.0-3Klaus Schmidinger
- Fixed the PremiereContentTransmissionDescriptor in 'libsi' (thanks to Stefan Huelswitt). - Removed all the compatibility '#if APIVERSNUM...' stuff and instead increased the API version number - plugins will have to be recompiled. - Removed the call to pthread_setschedparam(childTid, SCHED_RR, 0) in thread.c, because it caused a compiler warning with post-2.4 glibc (reported by Ville Skyttä). Since the third parameter has to be non-null to have any effect, the call was presumably a NOP, anyway. - Fixed the 'clean-plugins' target in the Makefile to also remove additional plugin libraries (thanks to Wayne Keer). - Applied the fixes to moving and deleting channels from version 1.4.0-2 to the SVDRP commands MOVC and DELC as well. - Fixed handling the display of the '*' indicator in the "What's on now/next?" menu, so that events that haven't been "seen" in the data stream within 30 seconds won't be shown as "running". - Fixed handling tabbed item display in 'skincurses'. - Increased the column spacing in the "Recordings" menu (was too small for the 'skincurses' plugin). - When the 'skincurses' plugin is loaded, it automatically sets the 'curses' skin as the current one. This doesn't modify the Setup.OSDSkin parameter, so that after using 'skincurses' (for instance for debugging) the previously selected skin will be used again. - Added some log messages when setting the current skin. - Only making a second attempt to set the current skin at startup if the first attempt has failed. - Now switching to non-VPS timers' channels 60 seconds before the timer starts (if a free device is available), to allow for the updating of EPG data and CA descriptors before the actual recording starts.
2006-04-17Version 1.3.47vdr-1.3.47Klaus Schmidinger
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed a crash when setting the time transponder in the Setup menu, caused by the new 'noneString' in cMenuEditChanItem (reported by Thomas Günther). - Added NULL checks to some strdup() calls in menuitems.c (suggested by Darren Salt). - Removed the unnecessary 'value' member from cMenuEditItem. - Fixed the initial setting of the time transponder setup parameter (reported by Thomas Günther). - Fixed unnecessary Set() calls in cMenuEditIntItem::ProcessKey(). - Allowing a tolerance for symbol rate values that are off by one (thanks to Richard Lithvall). - Added VBITeletextDescriptorTag, TeletextDescriptorTag, LocalTimeOffsetDescriptorTag and PremiereContentTransmissionDescriptor to 'libsi' (thanks to Marco Schlüßler). - Using geteuid() to check whether VDR is running as user 'root' (suggested by Tobias Grimm). - Added a missing "Key$" in skincurses.c (reported by Darren Salt). - Reintroduced the log message "deleting plugin: ..." when shutting down VDR (upon request by Ville Skyttä, as in the initial patch from Christoph Haubrich). - Fixed the vdr.1 man page (a single DVB card can record and do live tv). - The preferred audio language is now automatically selected when starting replay. - Updated the Danish OSD texts (thanks to Mogens Elneff). - The new function cPlugin::Active() can be used by a plugin to indicate that it is still busy and the system should not shut down or restart (based on a patch from Sascha Volkenandt). See PLUGINS.html for details. - Fixed setting the 'Delta' parameter when calling the shutdown script with no active timer (reported by Helge Lenz). - In order to make sure that plugins are compiled with the same DVB driver header files as VDR itself, the definition of DVBDIR has been removed from the VDR Makefile. If you are using a driver version that has its header files at a location other than /usr/include/linux/dvb, you can define DVBDIR in the Make.config file (see also INSTALL). Note that if you already have a Make.config file of your own, you should add the lines ifdef DVBDIR INCLUDES += -I$(DVBDIR)/include endif to its end, as in the new Make.config.template. Any reference to DVBDIR should be removed from all plugins' Makefiles, like this: ------------------------------------------------------------ --- PLUGINS/src/hello/Makefile 2005/11/11 13:20:14 1.10 +++ PLUGINS/src/hello/Makefile 2006/04/15 11:58:46 1.11 @@ -20,7 +20,6 @@ ### The directory environment: -DVBDIR = ../../../../DVB VDRDIR = ../../.. LIBDIR = ../../lib TMPDIR = /tmp @@ -40,7 +39,7 @@ ### Includes and Defines (add further entries here): -INCLUDES += -I$(VDRDIR)/include -I$(DVBDIR)/include +INCLUDES += -I$(VDRDIR)/include DEFINES += -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"$(PLUGIN)"' ------------------------------------------------------------ Thanks to Marco Schlüßler for pointing out this problem. - Implemented kNext and kPrev keys (based on a patch from Peter Juszack). See MANUAL for details. - Implemented kChanPrev (from a patch from Darren Salt). - The "Update channels" parameter in the "Setup/DVB" menu has been extended to allow updating only the PIDs (see MANUAL for details). When updating to this version of VDR, please verify that the setting is as you want it to be, because the values have been shifted. - The new APIVERSION (see config.h) now allows existing compiled plugins to be used with newer versions of VDR, as long as there have been no changes to the VDR header files since the last APIVERSION. Existing plugins' Makefiles should have all references to VDRVERSION changed to APIVERSION, like this: ------------------------------------------------------------ --- PLUGINS/src/hello/Makefile 2006/04/15 11:58:46 1.11 +++ PLUGINS/src/hello/Makefile 2006/04/16 09:03:50 1.12 @@ -28,9 +28,9 @@ -include $(VDRDIR)/Make.config -### The version number of VDR (taken from VDR's "config.h"): +### The version number of VDR's plugin API (taken from VDR's "config.h"): -VDRVERSION = $(shell grep 'define VDRVERSION ' $(VDRDIR)/config.h | awk '{ print $$3 }' | sed -e 's/"//g') +APIVERSION = $(shell sed -ne '/define APIVERSION/s/^.*"\(.*\)".*$$/\1/p' $(VDRDIR)/config.h) ### The name of the distribution archive: @@ -67,7 +67,7 @@ libvdr-$(PLUGIN).so: $(OBJS) $(CXX) $(CXXFLAGS) -shared $(OBJS) -o $@ - @cp $@ $(LIBDIR)/$@.$(VDRVERSION) + @cp $@ $(LIBDIR)/$@.$(APIVERSION) dist: clean @-rm -rf $(TMPDIR)/$(ARCHIVE) ------------------------------------------------------------ - If a timer is newly created from within the "Schedule" menu, and its event is already running or has its start time within the next two minutes, it now goes directly into the "Edit timer" menu in order to allow the user to make further changes to timer parameters before the actual recording starts (inspired by Christian Wieninger's "epgsearch" plugin). - Added format check to syslog_with_tid(). - Updated the INSTALL file's section about non-VDR files in the video directory (since version 1.3.38 disk access is done in a separate thread, so the watchdog timer won't hit). - Changed the behaviour of the "Use small font" setup option to *always* use the small font if set to '2' - even if it would have been a fixed font (suggested by Ronny Kornexl). - No longer using characters 0x01 and 0x02 for mapping single quote and slash in recording names (thanks to Patrick Fischer for reporting that this was a problem with XML). The single quote is not mapped at all, and the slash is interchanged with the tilde. Existing recordings will be handled like before, so there is no need to actually rename them. - The cRemote::CallPlugin() function now has a boolean return value that tells the caller whether initiating the plugin call was successful (suggested by Reinhard Nissl). If it returns false, another plugin call is currently pending and the caller should try again later. This also means that the SVDRP command PLUG can now return an error code is the call fails. - The new function cPlugin::MainThreadHook() can be used by plugins to perform actions in the context of the main program thread. Use this function with great care and only of you absolutely have to! See also PLUGINS.html.
2006-03-26Version 1.3.45vdr-1.3.45Klaus Schmidinger
- Fixed updating the "Info" button in the "Timers" menu. - Reduced the number of events to actually check when setting events to timers. - cMenuEditIntItem now checks the given value and forces it to be between the given min and max limits. - The status changes of EPG events are now logged for all channels that have timers. - Removed the log message "deleting plugin: ..." when shutting down VDR (thanks to Christoph Haubrich for reporting that this is irritating when calling "vdr --help"). - Fixed cReadLine::Read() for lines that end with the infamous "\r\n" (thanks to Rolf Ahrenberg). - Fixed cDvbDevice::SetAudioBypass() in case setTransferModeForDolbyDigital is false (thanks to Werner Fink). - Updated 'sources.conf' (thanks to Oleg Roitburd). - Fixed the shutdown timeout (thanks to Alexander Wenzel). - Only calling RemoveEmptyVideoDirectories() once in case a recording has been deleted (reported by Hardy Flor). - Fixed deleting recordings that have been removed externally when running out of disk space (reported by Jan Lenz). - Fixed handling repeating VPS timers (they stopped recording too early). - Timer log messages now show "VPS" if this is a VPS timer. - Fixed getting the present EPG event in case none is currently 'running' (it then returns the one that just ended). - Fixed calling a plugin's main menu function while a message is being displayed (reported by Helmut Auer). - Updated the Russian OSD texts (thanks to Oleg Roitburd). - Made cMenuRecordings::GetRecording() 'protected' (suggested by Marius Heidenstecker). - Speeded up cRemux::ScanVideoPacket() (thanks to Reinhard Nissl). - Enhanced logging EPG event data. - Fixed format string handling (thanks to Darren Salt). - The new function cDevice::ForceTransferMode() can be used to force the primary device into transfer mode (thanks to Reinhard Nissl). - The 'version' of EPG events is now ignored when reading EPG data from 'epg.data' or via SVDRP/PUTE to avoid problems with double EPG events. - The 'running status' of EPG events is now only set to SI::RunningStatusNotRunning for events before the present event. - Fixed some #include sequences. - Single shot VPS timers are now only considered 'expired' if their associated EPG event has been explicitly set to SI::RunningStatusNotRunning. - The check for timers to be deleted is now done only every 30 seconds.
2006-01-15Version 1.3.39vdr-1.3.39Klaus Schmidinger
- The SVDRP command LSTT now accepts the new option 'id' to have the channels of the timers listed with their unique channel ids instead of their numbers (suggested by Matthias Schniedermeyer). - Added a missing #include <linux/unistd.h> to thread.c (thanks to Ville Skyttä). - Fixed the "plugins-clean" and "plugins-install" targets in the Makefile (thanks to Andreas Brachold). - Fixed handling "more than 3 byte" key sequences in cKbdRemote::ReadKeySequence() (thanks to Peter Bieringer). If you are using the PC keyboard as remote control input you may need to make VDR newly learn the keys by removing the remote.conf file. - To avoid problems with access rights when VDR shall run as 'root' it now skips all SetCaps() and SetUser() calls when it is started as 'root' and "-u root" is given. - Added missing i18n entry for the "Timer" button (thanks to Ville Skyttä) - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Making the "Menu" key behave consistently has not been well received by several users, so the new option "Setup/OSD/Menu button closes" can be used to get the old behavior back (which also is the default value of this option). - Dropped the default vdr user. The program now always runs under the user id it was started from, unless the '-u' option is given and it was started from the 'root' user. If you want to have a default vdr user, you can activate and adjust the "VDR_USER = vdr" line in your Make.config file (from the original patch by Ludwig Nussel). - Key macros can now be defined for all non-modeless keys (suggested by Mirko Dölle). - Adjusted the "KEY MACROS" section of vdr.5 to the new plugin calling mechanism introduced in version 1.3.32. - Removed the now obsolete "ca.conf" section from vdr.1 (thanks to Ville Skyttä). - Added missing description of L and R circular polarization to 'diseqc.conf'. - Added a note about "modprobe capability" to INSTALL (suggested by Patrick Cernko). - Fixed canonicalizing the file name in the SVDRP command GRAB to allow full path names (thanks to Stefan Huelswitt). - Added a missing '-' to the example for viewing a grabbed image on a remote host (reported by Philippe Gramoullé). - Made the "What's on now/next?" menus a lot faster by storing a pointer to each channel's schedule in the cChannel data. - Made the log messages regarding lost lock of devices "info" instead of "error" (suggested by Andreas Brachold). - The SVDRP command GRAB allows file names without extension again (suggested by Stefan Huelswitt). - Pressing '0' in the "Schedule" menu now rotates through displaying "This event on this channel", "This event on all channels" and "All events on all channels". This can be used to find reruns of a given show, or the episodes of a series. Note that if there are many channels in your channels.conf, displaying the "All events on all channels" page may take a while. - The status markers in the "Schedule" menu are now only updated if a submenu is closed in which a timer has been modified, which speeds up closing submenus. - Now only writing Dolby Digital tracks into the 'info.vdr' file of a recording if Setup.UseDolbyDigital is true (suggested by André Weidemann). - Added a leading '0' to the day in the DayDateTime() function (thanks to Rolf Ahrenberg). - No longer displaying color buttons in the recording info menu if it has been invoked from a player (reported by Jürgen Schilling).
2006-01-08Version 1.3.38vdr-1.3.38Klaus Schmidinger
- Fixed handling second audio and Dolby Digital PIDs for encrypted channels (was broken in version 1.3.37). - Improved TS/PES conversion to better handle lost TS packets (thanks to Reinhard Nissl). - Limited the frequency of log messages from the cRepackers. - Now using the gettid() syscall to get a thread's pid, so that we get a useful value on NPTL systems (suggested by Johannes Stezenbach). - Fixed the RCU remote control handling to avoid problems with NPTL (thanks to Andreas Share for reporting a lockup with the RCU on NPTL systems). - When displaying the amount of free disk space, the space consumed by recordings that have been "deleted" but not yet actually "removed" is now taken into account (suggested by Christian Vogt). - Now avoiding unnecessary disk access when checking if there are deleted recordings that need to be removed (reported by Carsten Koch). - Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now a deleted recording is retained at least DELETEDLIFETIME seconds before actually removing it. The value of DELETEDLIFETIME has been changed to 300. So after (possibly inadvertently) deleting a recording, there will be at least 5 minutes in which it can be recovered (unless a new recording immediately requires the disk space). The count starts again at 0 every time VDR is started. - Fixed a possible crash when displaying the "Low disk space!" message from a background thread (thanks to Christof Steininger). - Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler). - Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground and background threads won't interfere. - The main menu now dynamically updates its contents in case an instant recording or replay stops, etc. - The version number of EPG events is now also stored in the epg.data file (thanks to Kendy Kutzner). - EPG events that are no longer in the currently broadcasted data stream are now automatically deleted. - Removed an invalid access to Event->schedule in cSchedule::DelEvent(). - Modified cSchedule::Cleanup() (events are always sorted by time). - Schedules are now cleaned up once every hour (not only at 05:00). - The "Schedule" and "What's on now/next?" menus are now updated if a timer is set or modified. - cTimer no longer has its own 'schedule' member, it rather uses that of the event it has been set to. - The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus now immediately creates a timer for the selected event and marks it with 'T'. If the event is already marked with 'T', the "Red" button opens the "Edit timer" menu for that timer. - Removing deleted recordings is now done in a separate thread. - Dropped the unused "stop recording on primary interface" stuff. - Converting a grabbed image to JPEG is now done with the new function RgbToJpeg() (see tools.h). - The SVDRP command GRAB now determines the image type (JPEG or PNM) from the extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit 'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but has no meaning any more. - The function cDevice::GrabImage() no longer writes the grabbed image to a file, but rather returns a pointer to the image in memory. The wrapper function cDevice::GrabImageFile() can be used to write the grabbed image directly to a file. Plugins that used the old version of cDevice::GrabImage() need to be adapted to the new interface. - The new class cBase64Encoder (see tools.h) can be used to encode data in base64 (thanks to Bob Withers for publishing his Base64 class). - The SVDRP command GRAB now writes the image data to the SVDRP connection (encoded in base64) if the given file name consists of only the file extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file name (based on a suggestion from Darren Salt). A simple way of viewing a grabbed image on a remote host is: svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display - - The new command line option '-g' must be given if the SVDRP command GRAB shall be allowed to write image files to disk. The parameter to this option must be the full path name of an existing directory, without any "..", double '/' or symlinks. By default, or if "-g- is given, grabbing to files is not allowed any more because of potential security risks. - Modified the way the SVDRP command GRAB writes the grabbed image to a file to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino Peña): + The file handle is now opened in a way that it won't follow symbolic links (suggested by Darren Salt). + The given file name is now canonicalized, so that it won't contain any ".." or symlinks (suggested by Darren Salt). + Grabbing to files is limited to the directory given in the the command line option '-g'. By default grabbing to files is not allowed any more. - Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos). - Changed all "illegal" to "invalid" in error messages (there's nothing "illegal" in VDR ;-). - When started as user 'root' VDR now switches to a lesser privileged user id, keeping the capability to set the system time (based on a patch from Ludwig Nussel). By default the user id 'vdr' is used, which can be changed through the new command line option '-u'. Note that for security reasons VDR will no longer run as user 'root' (unless you explicitly start it with '-u root', but this is not recommended!). The 'runvdr' script has been changed to use the '-u' option. - Changed the API of the functions cStatus::Recording() and cStatus::Replaying(), so that they can provide the full file name of the recording. Plugins that use these (or the related cStatus::Msg...() functions) need to be adapted (suggested by Andreas Brugger). - The DVB devices now retune (and, if applicable, resend the DiSEqC data) if the lock is lost (based on a patch from Reinhard Nissl). - Fixed handling multi byte key sequences in cKbdRemote (based on a patch from Jürgen Schneider). - Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco Schlüßler). - Made the static cControl functions thread safe (thanks to Patrick Fischer). - Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid warnings with g++ 4.1.0 (thanks to Ville Skyttä). - Fixed incrementing the 'state' variables in the repacker classes in remux.c to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä). - The Makefile now reports a summary of failed plugins (thanks to Udo Richter). - The cTimer constructor can now take an optional cChannel (suggested by Patrick Fischer). - Fixed setting the main thread id if VDR is running as a daemon. - Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl). - Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner). - Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger). - Now using FE_READ_STATUS to read the current frontend status (suggested by Holger Wächtler). - The "Menu" key now behaves consistently. If there is anything on the OSD, it is closed when the "Menu" key is pressed, and if there is nothing on the OSD, the "Menu" key opens the main menu (suggested by Luca Olivetti). - The new option "Setup/OSD/Timeout requested channel info" can be used to turn off the automatic timeout of the channel display in case it was invoked by a press of the "Ok" key (suggested by Thiemo Gehrke). - A message is now given when an instant recording is started (suggested by Helmut Auer). Actually the code was already there, just commented out - don't remember why it wasn't active... - Removed an obsolete "Summary" text from i18n.c and preceded all key definition texts with "Key$" to avoid duplicates (reported by Lucian Muresan). - Preceded all button texts with "Button$". - Removed obsolete "Eject", "Language" and "scanning recordings..." texts. - Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill). - Disabled the use of "fadvise" in cUnbufferedFile because there have been several reports that it causes more problems than it solves (suggested by Petri Hintukainen). If you want to use "fadvise", you can activate the line //#define USE_FADVISE in tools.c. - Removed unused 'offset' member from cOsdItem. - In the "Channels" menu the numeric keys now position the cursor to the channel with the given number (see MANUAL, section "Remote Control Keys", note (3) for details). - The "Mark/Move" function in the "Channels" menu now also works in the non-numeric sort modes. - The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if this is a menu. - The new "Info" key brings up information on the currently viewed programme or recording. For a live programme this is the same as "Schedule/Ok", i.e. the description of the current EPG event. For a recording this is the same as shown by the "Info" button in the "Recordings" menu. Plugins that implement players can overwrite their cControl::GetInfo() function to show their own info (see PLUGINS.html for details). Pressing the "Info" key again while the info is displayed will close the OSD. In order to assign this new key to an existing remote control setup, the remote.conf file needs to be deleted and VDR has to be restarted to go through the process of learning the remote control keys. - Any cReceivers still attached to a cDevice when that device switches to a different transponder are now automatically detached (suggested by Patrick Fischer). - The "flags" of a timer are now handled as an unsigned integer value. In order to do this, the interface of cMenuEditBitItem also had to be changed. - In string entry fields (like, e.g., the file name of a recording) the characters can now be entered by pressing the numeric keys, the same way as on a telephone keypad (based on the "Easy Input" patch from Marcel Schaeben). - Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch from "single shot" to "weekly", followed by the "Right" key (reported by Andreas Böttger). - The file 'ca.conf' is obsolete and has been removed. - Revised all descriptions regarding CICAM. - Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling. - Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack() (thanks to Reinhard Nissl). - Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo Schneider). - Cleaned up some trailing white space.
2005-11-27Version 1.3.37vdr-1.3.37Klaus Schmidinger
- Added compiler options "-fPIC -g" to all plugins (thanks to Rolf Ahrenberg). - Fixed initializing the day index when editing the weekday parameter of a repeating timer (thanks to Marco Schlüßler). - No longer removing superfluous hyphens in EPG data - would become too language dependent to handle all kinds of exceptions. - Modified switching to Dolby Digital audio in live mode, if the driver and firmware can handle live DD without the need of a Transfer Mode (thanks to Werner Fink). Live DD mode requires a full featured DVB card and a LinuxDVB driver with firmware version 0x2622 or higher. Older versions will use Transfer Mode just like before. - Implemented handling of the "CA PMT Reply" for CAMs (thanks to Marco Schlüßler for figuring out some obscure length bytes in the CA PMT Reply data of AlphaCrypt CAMs). - Some preparations for being able to record several encrypted channels from the same transponder at the same time (or record and view different encrypted channels), provided the CAM in use can handle this. This is work in progress and isn't actively used, yet. - Fixed SetProgress() in the 'skincurses' plugin in case Total is 0 (reported by Stefan Huelswitt). - Added a copy constructor to cString and fixed its assignment operator (thanks to Holger Brunn). - The new function Skins.QueueMessage() can be called from a background thread to queue a message for display. See VDR/skins.h for details. - The SVDRP command MESG uses the new message queueing facility, so MESG commands may now be executed at any time, and the message will be displayed (no more "pending message").
2005-11-06Version 1.3.36vdr-1.3.36Klaus Schmidinger
- Fixed a NULL pointer access with the cUnbufferedFile when a replay session runs all the way until the end of the recording (thanks to Joachim Wilke). - A menu is no longer automatically closed when a replay ends (reported by Marko Mäkelä). - Removed '\n' from several syslog() calls (reported by Sascha Volkenandt). - Fixed missing '&' in the SetAreas() example in PLUGINS.html (reported by Sascha Volkenandt). - Fixed a memory leak in cString::operator=() (reported by Sascha Volkenandt). - Updated the Dutch OSD texts (thanks to Maarten Wisse). - cReadLine now dynamically allocates its buffer, so that it can handle lines of any length. - Changed cConfig::Load() to use cReadLine instead of a fixed buffer (thanks to Andreas Mair for reporting a problem with extremely long summary fields in timers). - cSVDRP now dynamically allocates its command buffer in order to handle commands of any length. The MAXPARSEBUFFER macro is now obsolete and has been removed. If a plugin has used that macro, it should either define a buffer size of its own, or use cReadLine when reading files. - Fixed a race condition in the SPU decoder (thanks to Marco Schlüßler). - The EPG scan no longer disturbs players that have also set live PIDs (reported by Stefan Huelswitt). - Fixed setting the help key display in the Recordings menu in case of several layers of subdirectories. - Removed EPG bugfix #0, because it removed actually important data.
2005-09-25Version 1.3.33vdr-1.3.33Klaus Schmidinger
- Fixed two errors in 'newplugin' (thanks to Alexander Rieger). - Fixed converting arbitrarily formatted summary.vdr files (thanks to Thomas Günther). - Fixed handling color buttons in cMenuEditStrItem (thanks to Alexander Rieger). - Added cChannel::LinkChannels() and cChannel::RefChannel() (suggested by Helmut Auer). Note that VDR itself doesn't actually use the linked channels, yet, so there is no guarantee that this really works under all circumstances. - Added a missing include statement to the 'sky' plugin (thanks to Alfred Zastrow for reporting this one). - Fixed handling key macros with keys after @plugin (thanks to Rolf Ahrenberg for reporting this one). - Fixed error handling in cCiTransportConnection::RecvTPDU() (thanks to Georg Acher for reporting this one). - Removed obsolete 'shift' code in device.[hc]. - The SVDRP command DELR no longer triggers a complete reload of the global Recordings list, but rather deletes that particular entry. - The list of recordings is now read in a separate thread, resulting in a faster startup if there are a great many of recordings, or the disk(s) have to spin up. If the Recordings menu is opened while the list of recordings is still being read, the menu will be updated accordingly. Plugins that access the global Recordings variable should lock the thread by putting something like cThreadLock RecordingsLock(&Recordings); into the respective code block. Thanks to Carsten Koch for his help in testing and debugging this. - The 'new' indicator in the Recordings menu is now kept up-to-date (thanks to Thomas Günther). - Updated the Romanian OSD texts (thanks to Lucian Muresan). - Updated the Russian OSD texts (thanks to Oleg Roitburd). - The '.update' file in the video directory is now touched when a recording is added or deleted, so that other VDR instances can update their lists (thanks to Alexander Rieger). - Made the function ExchangeChars() public (suggested by Lucian Muresan).
2005-09-11Version 1.3.32vdr-1.3.32Klaus Schmidinger
- Added some missing braces in remux.c (thanks to Wayne Keer for reporting this one). - Removed unused MAINMENUENTRY from svdrpdemo.c (thanks to Udo Richter for reporting this one). - Fixed appending sequence end code in cDvbPlayer::Goto() (thanks to Reinhard Nissl). - Fixed syncing in cRepacker (thanks to Reinhard Nissl). - Now always using stream id 0xE0 for the video stream, to avoid problems with post processing tools that choke on different ids (suggested by Reinhard Nissl). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed cDvbPlayer::SkipFrames() to properly handle radio recordings (thanks to Reinhard Nissl). - Updated the Swedish OSD texts (thanks to Tomas Prybil). - Updated the Slovenian OSD texts (thanks to Matjaz Thaler). - Updated the Danish OSD texts (thanks to Mogens Elneff). - Made LIRC command parsing more robust (thanks to Ville Skyttä). - Introduced a separate 'plugins-install' target in the Makefile (thanks to Daniel Thompson). - Re-introduced the code that waits for a tuner lock in VDR/device.c, since apparently some users actually need it. It's not active by default, you'll have to define the WAIT_FOR_TUNER_LOCK macro in that file if you need it (suggested by Malcolm Caldwell). - Adjusted the Makefile to the dvb-kernel driver on kernel 2.6 and up (thanks to Lauri Tischler). - Repeat keys are now ignored when waiting for a keypress to cancel an operation (thanks to Marko Mäkelä). - The main menu function of a plugin can now be activated through a key macro of the form "@plugin" even if that plugin doesn't have a main menu entry (using part of a patch by Hardy Flor, which originally implemented calling plugins from SVDRP). - The menu timeout handling is now done centrally in the main program loop. - Added missing help for the 'help' keyword in the SVDRP command PLUG. - The main menu function of a plugin can now be called programmatically through the static function cRemote::CallPlugin(). - The SVDRP command PLUG now has a new option 'main' which can be used to initiate a call to the main menu function of a plugin (using part of a patch by Hardy Flor). - The new command line option '--vfat' can be used to make VDR encode special characters in recording file names, even if it wasn't compiled with VFAT=1 (suggested by Peter Bieringer). The compile time option VFAT still exists and creates a VDR that always behaves as if it were called with '--vfat'. - Replaced the ':' delimiter between hour and minute in recording file names with a '.' under Linux, too. Existing recordings with ':' as delimiter will still work. - Implemented the SVDRP command MOVC (thanks to Andreas Brachold). - Added support for multiple audio language codes in ISO639LanguageDescriptors to 'libsi' (thanks to Marcel Wiesweg). - Changed the audio PID language codes to hold up to two 3 letter codes, separated by '+', to store separate languages broadcast in two channel audio mode. - If the preferred audio language is broadcast on a PID that has two different languages in the two stereo channels, the audio channel is now properly set when switching to such a channel (thanks to Mogens Elneff for his help in testing this). - Fixed some typos in MANUAL (thanks to Ville Skyttä). - Fixed the default value for "Setup/EPG bugfix level" (thanks to Ville Skyttä for reporting this one). - Fixed defining timers that only differ in the day of week (thanks to Patrick Rother for reporting this one). - Fixed converting summary.vdr files that would result in a very long 'short text' (thanks to Carsten Koch). - Implemented a hash for the channels to reduce the system load in the EIT scanning thread (based on a patch by Georg Acher).
2005-08-28Version 1.3.31vdr-1.3.31Klaus Schmidinger
- Added missing German OSD texts for 'Audio language'. - The Setup/CICAM menu now only contains the devices that actually have a CI and dynamically detects the number of slots a CI provides. - Implemented cAudioRepacker for better handling of audio PES packets (thanks to Reinhard Nissl). - Modified handling of audio packets for radio channels in remux.c (thanks to Reinhard Nissl). - Updated the Danish OSD texts (thanks to Mogens Elneff). - Fixed the EPG scan, so that it doesn't use the primary device if that is currently in Transfer-Mode from itself (thanks to Marcus Hilbrich for a bug report that lead to this). - Removed the TUNER_LOCK_TIMEOUT in cDevice::AttachReceiver() since it caused more trouble than it fixed. - Fixed detecting short channel names for "Kabel Deutschland", who uses a comma as delimiter (thanks to Marco Schlüßler). - Moved cMenuEditTimer and cMenuEvent to menu.h so that plugins can use it (suggested by Thomas Günther). - The new static function cString::sprintf() can be used to easily create a formatted string. - Plugins can now implement their own SVDRP commands (based on a patch from Hardy Flor). See PLUGINS.html, section "SVDRP commands" for details. The SVDRP commands of a plugin are accessed through the new SVDRP command PLUG. See PLUGINS/src/svdrpdemo for an example of how to use this feature. - The new SVDRP command PLAY can be used to start replaying a recording (thanks to Hardy Flor). - The new SVDRP command EDIT can be used to start the editing process of a recording (based on the CUTR patch by Harald Milz).
2005-08-07Version 1.3.28vdr-1.3.28Klaus Schmidinger
- Added a sleep in cDvbPlayer::Action() in case there is no data to send to the device, which avoids a busy loop on very fast machines (thanks to Martin Wache). - Modified the description of cDevice::Poll() to avoid misunderstandings. - Updated Croatian language texts (thanks to Drazen Dupor). - cDvbPlayer::Goto() now appends a Sequence End Code to get the image shown immediately with softdevices (thanks to Reinhard Nissl). - Reactivated cVideoRepacker in remux.c after some fixes (thanks to Reinhard Nissl). - Removed the fix for handling VPS timers, so that they only record if the event they are assigned to actually has the given VPS time. This has caused repeating VPS timers to stop recording prematurely. - Avoiding duplicate components in EPG events when reading epg.data or in the PUTE SVDRP command (thanks to Olaf Titz for reporting this one). - Added the command line options '--lirc', '--rcu' and '--no-kbd' to allow setting the remote control at runtime (based on a patch by Darren Salt). - Now checking whether timers or channels are currently being edited via the menu before making changes through SVDRP (thanks to Andreas Brugger for reporting a problem with this). - Files and directories are now created with rights according to the shell's umask settings (thanks to Andreas Brachold). - Fixed the cChannel copy constructor (thanks to Marcel Wiesweg for pointing out a problem with it). - Fixed an out-of-bounds memory access with audio language ids (thanks to Matthias Lenk for reporting, and Udo Richter for suggesting a fix). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added missing storing of the MenuScrollPage parameter (thanks to Frank Krömmelbein). - Added cRemux::SetTimeouts() for better use of cRemux in a single thread (thanks to Udo Richter for reporting a problem with this). - Modified cEITScanner::Process() so that it uses the primary device if it is replaying and is the only device that provides the given transponder, and that a forced EPG scan works even if EPG scan timeout is set to 0 (thanks to Bernhard Stegmaier for reporting a problem with this). - Fixed cDvbSpuBitmap::putPixel() (thanks to Reinhard Nissl). - Fixed setting system time to avoid time jumps in case of faulty data (thanks to Andreas Böttger). - Fixed a memory leak in the SVDRP command LSTE (thanks to Stefan Huelswitt).
2005-05-29Version 1.3.25vdr-1.3.25Klaus Schmidinger
- Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Some cable providers don't mark short channel names according to the standard, but rather go their own way and use "name>short name". VDR now splits at this character for cable channels (thanks to Gerhard Steiner for reporting this one). - Added a check for Setup.DiSEqC in cDvbDevice::ProvidesTransponder(), otherwise the EPG scan didn't work on systems that don't use DiSEqC (thanks to Michael Reinelt for reporting this one). - Made the Makefile patch friendlier (thanks to Ludwig Nussel). - Made cOsd::isOpen an integer counter to avoid problems with messages when a cOsdObject uses the raw OSD (thanks to Andreas Regel for reporting this one). - Updated the Danish OSD texts (thanks to Mogens Elneff). - The file 'summary.vdr' has been replaced with 'info.vdr' and now contains the information about a recording, in the same format as the events are stored in 'epg.data' (see man vdr(5) for details). Existing summary files can be converted to the new format by running the Perl script 'summary2info.pl', as in summary2info.pl /video (the parameter given has to be the video directory). If there is no 'info.vdr' file for a recording, an attempt is made to read a 'summary.vdr'. - The "Summary" button in the "Recordings" menu has been renamed to "Info", and the page it brings up now shows the recording's information, much like the EPG event page. Therefore it now no longer uses the skin's SetText() function, but rather the SetRecording() function. Skin plugins may need to adjust that function accordingly (see skinsttng.c, for instance). - The SVDRP command LSTR now lists the recording information in the same tagged format as the LSTE command lists the EPG data. - The audio track menu now contains track descriptions when replaying (provided such descriptions were available in the EPG data when the recording was made, and are stored in the info.vdr file). - Avoiding extra blanks at the end of names of instant recordings. - Removed converting byte order on big endian systems from cDvbOsd::Flush(), which, according to Johannes Stezenbach and Paavo Hartikainen, is wrong. - Added cPlayer::DeviceSetVideoDisplayFormat() (thanks to Marco Schlüßler). - No longer saving the setup in case of a fatal error, to keep the volume level from being set to a wrong value (thanks to Marco Schlüßler). - Fixed a possible hangup when ending a replay session while cIndexFile::CatchUp() is waiting (thanks to Marco Schlüßler). - The SVDRP command DELR no longer deletes recordings that are currently being written to by a timer (thanks to Sascha Volkenandt for pointing out this one). - Pressing the "Play" key in live viewing mode now resumes a previous replay session (thanks to Mirko Dölle). - Now dropping EPG events that have a zero start time or duration (thanks to Oliver Endriss). - No longer stopping Transfer Mode or replay immediately when the Power button is pressed (thanks to Rolf Ahrenberg). - Moved the NPTL and UTF-8 checks after the version and help output (thanks to Andreas Kool for pointing out that 'vdr --version' failed on an UTF-8 system). - Made tChannelID::operator==() inline for better performance (thanks to Georg Acher). - Introduced cListBase::count for better performance (thanks to Georg Acher). - cEvent no longer stores the channelID directly, but rather has a pointer to the schedule it is in. - Now using hash tables to speed up cSchedule::GetEvent() (partially based on a patch from Georg Acher). - Avoiding unnecessary calls to getLength() in libsi/si.c, and avoiding the '& 0xff' in CRC32::crc32() of libsi/util.c (thanks to Georg Acher). - Speeded up deleting duplicate channels. - Fixed listing recordings with empty episode names in the LSTR command (thanks to Stefan Huelswitt for pointing this out). - Added cThread::SetPriority() and using it in cSectionHandler::Action() to reduce the priority of the section handler threads (as suggested by Georg Acher).
2005-05-08Version 1.3.24vdr-1.3.24Klaus Schmidinger
- Now including the optional user defined Make.config from the 'libsi' Makefile (thanks to Ville Skyttä). - Updated the Danish OSD texts (thanks to Mogens Elneff). - Fixed a memory leak in tComponent (thanks to Stefan Huelswitt and Daniel Thompson). - Fixed a memory leak in cDvbPlayer (thanks to Stefan Huelswitt). - Added missing text internationalization for "Starting EPG scan" (thanks to Matthias Lötzke). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed handling transparent areas in cDvbSpuBitmap (thanks to Marco Schlüßler). - Now also considering the "EPG linger time" when saving the EPG data to file or listing it via LSTE (thanks to Roman Krenický). - Fixed handling fragments of less than 4 byte in cPesAssembler (thanks to Reinhard Nissl). - Fixed a bug in libsi's SubtitlingDescriptor::getLength() (thanks to Marco Schlüßler). - When reading the channels.conf file, duplicate channels (i.e. ones that have the same channel ID) are now automatically deleted and only the first one is actually stored. - Fixed handling lifetime when deciding whether to delete a recording (thanks to Udo Richter). - Fixed timeout handling in cRwLock::Lock() (thanks to Sascha Volkenandt for reporting this one). - Since there are several places in thread.c where a timeout value is calculated, this has been put into a separate function. - The timer status now has a new bit that is set when that timer is currently recording (suggested by Matthias Schniedermeyer). See man vdr(5) for details. - Removed scaling coordinates in letterbox mode from cDvbSpu - the DVD plugin, which was the only one needing this, doesn't need it any more (thanks to Marco Schlüßler). - No longer retuning or restarting a recording if only the language code of an audio or Dolby PID changes. - Now preferring budget cards when selecting a DVB device for recording. - Recordings now avoid zero sized video data files (thanks to Wolfgang Fitz). - Some rearrangements in cDvbPlayer::Action() to avoid lockups on NPTL systems (thanks to Reinhard Nissl). - Fixed a wrong inheritance in libsi's SubtitlingDescriptor::Subtitling (thanks to Marco Schlüßler).
2005-03-20Version 1.3.23vdr-1.3.23Klaus Schmidinger
- The setup option "DVB/Video display format" is now only available if "Video format" is set to "4:3" (suggested by Mikko Salo). - Updated the Russian OSD texts (thanks to Vyacheslav Dikonov). - Dropped CA support for the old '-icam' firmware. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Updated the Swedish OSD texts (thanks to Tomas Prybil). - Fixed a few French OSD texts that were in the wrong place. - Improved matching timers to EPG events, especially in case there are several events with the same VPS time. - Fixed cDolbyRepacker to allow recording ProSieben HD broadcasts (thanks to Reinhard Nissl). - Fixed cDvbDevice::SetVideoDisplayFormat() in case of 16:9 (thanks to Marco Schlüßler). - The running status of a VPS event is now only taken seriously if that event has been seen within the last 30 seconds - otherwise recording is done as if no VPS was available. - The day of a timer is now stored as a full date in ISO notation ("YYYY-MM-DD") in 'timers.conf' and for the result of the SVDRP command LSTT (based in parts on a patch by Roman Krenický). - Some fixes to avoid compiler warnings in gcc 4.0 (thanks to Ville Skyttä for reporting these). - Single shot timers are now reliably deleted when they have expired. - Fixed setting the colored button help after deleting a recording in case the next menu entry is a directory (thanks to Steffen Beyer). - Improved falling back to normal recording if the VPS data hasn't been seen for more than 30 seconds. - Added a missing cMutexLock to cRemote::HasKeys() (thanks to Wolfgang Rohdewald). - All log entries regarding timers now contain a short description of the timer.
2005-01-09Version 1.3.18vdr-1.3.18Klaus Schmidinger
- Removed an unused variable from cTimer::GetWDayFromMDay() (thanks to Wayne Keer for reporting this one). - Some more changes to the 'childTid' handling in cThread (based on suggestions by Stefan Huelswitt). - Fixed the spelling of 'canceling' (thanks to Wayne Keer for reporting this one). - Re-introduced a sleep to cDvbPlayer::Action() to avoid high CPU load in still picture mode (thanks to Reinhard Nissl for reporting this one). - Fixed a possible race condition in generating the DVB device names (thanks to Rainer Zocholl for reporting this one). - Changed the way PES packets are played to allow replay of AC3 sound over the full featured DVB cards (partially based on a patch from Werner Fink). + The new function cDevice::PlayPes() is now called with the complete PES data stream and calls PlayVideo() and PlayAudio() as necessary. + cDevice::PlayVideo() is now only called with actual video PES packets. + cDevice::PlayAudio() is now called with the actual audio PES packets, which can be either "normal" audio or AC3 data. You need at least firmware version 0x261d to replay AC3 sound over a full featured DVB card. This function now has an 'int' return value. + PlayAudio() of derived cDevice classes shall no longer call the base class function. It shall just play the given data as audio. + cPlayer::PlayVideo() and cPlayer::PlayAudio() are now obsolete and have been replaced with cPlayer::PlayPes(). + All StripAudioPackets() functions are now obsolete. The functionality has been moved into cDevice::PlayPes(), where only the video and audio packets that are actually required will be processed. + All audio track handling is now done by cDevice; cTransfer and cDvbPlayer no longer care about audio tracks. cPlayer, however, still has the virtual hooks for audio track handling in order to allow plugins to implement players that have their own idea about this. + cChannel::[AD]pid[12]() have been replaced with cChannel::[AD]pid(int i) to allow access to all available PIDs. - Escaped the '-' and 'ö' characters in the man pages (thanks to Darren Salt for pointing this out). - Completed the Italian OSD texts (thanks to Sean Carlos). - Fixed setting 'synced' in cRemux when recording radio channels (thanks to Laurence Abbott). - Removed the LOCK_THREAD from the LIRC thread (thanks to Ludwig Nussel). - Fixed genfontfile.c (sometimes the character width was wrong, and the codes were shifted one too far to the left). - Fixed the character width and shifted the codes one to the right in all font files. - Renamed font???.c to font???-iso8859-1.c for symmetry. - Switched the character set to iso8859-15 for English, German and Finnish (thanks to Andreas Brugger for reporting the missing Euro sign in iso8859-1). - Added 'channels.conf.terr' entries for Lübeck (thanks to Stefan Hußfeldt). - Fixed a race condition in starting a thread (thanks to Reinhard Nissl for reporting this one). - Replaced non-threadsafe library functions with their threadsafe versions (thanks to Rainer Zocholl for pointing this out). - Other non-threadsafe functions have been replaced by threadsafe classes that hide the actual buffering. In particular these are: readdir() -> cReadDir readline() -> cReadLine - Several formerly non-threadsafe functions now have a return type of cString: cChannel::ToText() tChannelID::ToString() cEvent::GetDateString() cEvent::GetTimeString() cEvent::GetEndTimeString() cEvent::GetVpsString() cMark::ToText() cTimer::ToText() cSource::ToString() cTimer::PrintDay() cTimer::PrintFirstDay() PrefixVideoFileName() IndexToHMSF() ChannelString() strescape() AddDirectory() itoa() WeekDayName() DayDateTime() When using these functions in a 'const char *' context there is nothing special to consider, except that you can no longer have a pointer to the return value, as in const char *date = DayDateTime(); Although this will compile without error message, the resulting 'date' will not be valid after this line. Use this instead: cString date = DayDateTime(); In a 'const void *' context (as in printf() etc.) the result needs to be dereferenced with a '*', as in printf("%s", *DayDateTime()); to make it a 'const char *'. - Removed delay_ms(), using cCondWait::SleepMs() instead. - Replaced time_ms() with a threadsafe and non-overflowing cTimeMs (thanks to Rainer Zocholl for pointing out this problem). - Added cDevice::mutexReceiver to avoid a race condition when attaching/detaching receivers from different threads. - The new remote control button "Audio" can be used to switch between different audio tracks. The "Green" button in the "Main" menu has been changed from "Language" to "Audio", since it now also controls switching between normal and Dolby Digital audio tracks (see MANUAL for details). - The description of the audio tracks is now taken from the "component descriptors" that are broadcast in the EPG data. However (as no big surprise), not all channels actually provide useful data here, so there are now some additional EPG bugfixes, which can be activated by setting the "EPG bugfix level" to 3. - The format of the 'epg.data' files has been extended by the new tag 'X', which contains the stream components of an event (see man vdr(5) for details). - The cStatus class now has the new member function SetAudioTrack(), which can be used to get notified when the audio track has been switched, and the new member function SetAudioChannel() which is called when the audio channel is changed. - Skins need to implement the new cSkinDisplayTrack class to display the audio track menu. - The ST:TNG skin now displays the current audio track description (if any) at the botton left side. - The new setup option "DVB/Audio languages" can be used to control which audio language shall be selected in case a channel broadcasts in different languages (see MANUAL for details). - The "Left" and "Right" keys in the "Audio" menu can be used to switch between the left and right stereo channels in case there are different audio tracks in these channels (see MANUAL for details). - Fixed a possible race condition in cDevice::Action() (thanks to Mattias Grönlund). - Fixed the default quality value when grabbing a JPEG image (thanks to Patrick Gleichmann). - Fixed deleting a menu item in case the next item is not selectable (thanks to Dino Ravnic). - Implemented displaying mandatory subtitles in the SPU decoder (thanks to Marco Schlüßler). - The setup option "Recording/Record Dolby Digital" has been renamed and moved to "DVB/Use Dolby Digital". It now controls whether Dolby Digital is recorded and whether an available DD audio track will appear in the "Audio" menu. - Added support for circular polarization (thanks to Jonan Santiago). - Thanks to Werner Fink, Reinhard Nissl, Sascha Volkenandt and Bjørnar Nilsen for their support in testing and fine tuning this version.
2004-11-01Version 1.3.15vdr-1.3.15Klaus Schmidinger
- Fixed some typos in the Makefile's 'font' target (thanks to Uwe Hanke). - Added more checks and polling when getting frontend events (based on a patch from Werner Fink). - No longer explicitly waiting for a tuner lock when switching channels (apparently setting "live" PIDs before the tuner is locked doesn't hurt). Moved the wait into cDevice::AttachReceiver() instead. - Immediately displaying the new channel info when switching channel groups. - Moved the main program loop variables further up to allow compilation with older compiler versions (thanks to Marco Schlüßler for reporting this one). - Now calling pthread_cond_broadcast() in the destructor of cCondWait and cCondVar to make sure any sleepers will wake up (suggested by Werner Fink). Also using pthread_cond_broadcast() instead of pthread_cond_signal() in cCondWait, in case there is more than one sleeper. - Making sure that timers and channels are only saved together, in a consistent manner (thanks to Mirko Dölle for reporting a problem with inconsistent channel and timer lists). - Now handling the channel name, short name and provider separately. cChannel therefore has two new functions, ShortName() and Provider(). ShortName() can be used to display a short version of the name (in case such a version is available). The optional boolean parameter of ShortName() can be set to true to make it return the name, if no short name is available. The sequence of 'name' and 'short name' in the channels.conf file has been swapped (see man vdr(5)). - Added the 'portal name' to cChannels (thanks to Marco Schlüßler). - Fixed handling key codes that start with 0x1B in the KBD remote control code. - Now using qsort() to sort cListBase lists. For this, the virtual function cListObject::operator<() has been replaced with cListObject::Compare(). Plugins that implement derived cListObject classes may need to adjust their code. - The "Channels" menu can now be sorted "by number" (default), "by name" and "by provider". While in the "Channels" menu, pressing the '0' key switches through these modes. - Fixed the buffer size in cRecording::SortName(). - Now displaying the name of the remote control for which the keys are being learned inside the menu to avoid overwriting the date/time in the 'classic' skin (thanks to Oliver Endriss for reporting this one).
2004-10-17Version 1.3.13vdr-1.3.13Klaus Schmidinger
- Fixed checking for the presence of NPTL (thanks to Jouni Karvo). - Making sure section filters are only set if the device actually has a lock (thanks to Andreas Share for pointing this out). - Fixed a possible NULL pointer assignment in cMenuText::SetText() (thanks to Marco Schlüssler). - Fixed a crash in case the last line in channels.conf is a group separator and that group is selected in the channel display (thanks to Dick Streefland). - Added cRingBufferLinear::Read() to read directly from a file handle into the ring buffer. - Using timeouts in ring buffers to avoid 'usleep()'. - Clearing the 'Transfer Mode' ring buffer after clearing the device to avoid an "almost full" ring buffer. - Removed locking from cRingBufferLinear for better performance under high load. - Using a cRingBufferLinear in cRemux to avoid unnecessary copying of data. - Using a cRingBufferLinear in cTSBuffer and filling it in a separate thread to avoid buffer overflows. Plugins using cTSBuffer will need to remove the call to the now obsolete Read() function (see cDvbDevice::GetTSPacket() for the new usage of cTSBuffer). - cRemux::Process() has been split into Put(), Get() and Del() to allow for a better decoupling of the remuxing and disk writing process. Plugins using cRemux will need to be modified accordingly. - The actual disk writing in recordings is now done in a separate thread to improve the overall throughput. - Changed cRemux so that it returns the maximum available amount of data with each call, not just 2048 byte. - Added a visual display of all cRingBufferLinear buffers for debugging. To activate it, define DEBUGRINGBUFFERS in ringbuffer.h. - Instead of cCondVar now using the new cCondWait (which also avoids a possible "near miss" condition; thanks to Sascha Volkenandt for pointing out this one). cCondVar is still present for plugins that use it (and VDR itself also still uses it in cRemote). - The cRingBuffer now does EnableGet()/EnablePut() only if the buffer is more than one third full or empty, respectively. This dramatically improves recording performance and reduces system load (thanks to Marco Schlüßler for doing some testing regarding buffer performance and giving me some hints that finally led to finding out that this was the basic problem causing buffer overflows). - Improved Transfer Mode (thanks to Marco Schlüßler for suggestions and testing). - Fixed a possible crash with inconsistent SI data (thanks to Marcel Wiesweg). - Fixed showing the replay mode if the OSD is currently in use (thanks to Kimmo Tykkala for pointing out this problem). - cOsdProvider::NewOsd() now always returns a valid pointer, even if the OSD is currently in use (it will then return a dummy cOsd object and write a message to the log file). - Added Estonian language texts (thanks to Arthur Konovalov). - Fixed 'newplugin' and libsi/Makefile to use the compiler defined in $(CXX) for generating file dependencies (thanks to Andreas Brachold). - Moved the initialization of aPid1 and aPid2 to the beginning of cDvbDevice::cDvbDevice() to have them set in case a patch references them (thanks to Wayne Keer for pointing this out). - Completed the Russian OSD texts (thanks to Vyacheslav Dikonov). - Avoiding unnecessary section filter start/stops (thanks to Marco Schlüßler). - Made the "Channel not available!" message and mtInfo instead of mtError (suggested by Wayne Keer). - Made volume control more linear (thanks to Emil Naepflein and Udo Richter). - Now skipping code table info in SI data (suggested by Milos Kapoun). - Added missing Czech characters to fontosd-iso8859-2.c (thanks to Milos Kapoun). - Fixed a crash in the time search mechanism (reported by Reinhard Nissl). - If one PID can't be added, the whole cDevice::AttachReceiver() will now fail and all PIDs added so far will be deleted (thanks to Marco Schlüßler for pointing out this one). - Now only saving channels.conf after a modification made by the user (avoids lots of disk access due to automatic channel updates). Automatic channel modifications will be saved every 10 minutes if no recording is currently active. - Removed the 'Log' parameter from the cChannel::Set... functions. Instead checking if the channel has a non-zero number. - Updated 'channels.conf.terr' for Hannover (thanks to Sven Kreiensen).
2004-06-19Version 1.3.11vdr-1.3.11Klaus Schmidinger
- In order to avoid problems on NPTL systems, VDR now checks for the presence of NPTL at program start, and if it is, exits and tells the user to do 'export LD_ASSUME_KERNEL=2.4.1' before starting VDR. - Revisited the "Fixed missing audio after replaying a DVD" change because it introduced a sound disturbance when switching between channels on the same transponder (thanks to Marco Schlüßler). - In order to avoid problems on UTF-8 systems, VDR now checks for the presence of UTF-8 at program start, and if it is, exits and tells the user to turn off UTF-8 before starting VDR (thanks to Ludwig Nussel for pointing out a problem with systems that are set to use UTF-8). There are also problems in case the video partition is mounted with "iocharset=utf8" (thanks to Jörg Knitter for reporting this one). Please also read the "IMPORTANT NOTES" section in the INSTALL file! - Some changes to the SPU decoder interface (thanks to Sven Goethel). - Some improvements in cOsd creation (thanks to some suggestions by Jouni Karvo). - Fixed calculating the OSD width and height (thanks to Olaf Henkel for reporting a problem with long event texts in the "Classic VDR" skin). - Fixed switching channels while an encrypted channel is being recorded, because the channel was switched if the new channel was on the same transponder and was a radio channel or an unencrypted channel (thanks to Martin Dauskardt for reporting this one). - No longer using the external 'find' command to scan the video directory for recordings (based on a suggestion by Mirko Dölle). - The list of recordings is now kept statically in memory to avoid long delays when opening the "Recordings" menu. As a side effect, external modifications to the video directory are no longer immediately reflected in the "Recordings" menu. If a plugin manipulates the video directory in any way, it can call the function Recordings.TriggerUpdate() to trigger an update of the list of recordings. If some external tool manipulates the video directory, it can touch the file '.update' in the video directory to trigger an update of the list of recordings. - Fixed a memory leak in theme description handling (thanks to Sascha Volkenandt). - Added cDevice::Flush() to make sure that all data in the video card's buffers has been processed (thanks to Reinhard Nissl). Currently this is not yet actually implemented for FF DVB cards. - Fixed handling the color button texts in cMenuEditStrItem (thanks to Maynard Cedric for reporting this one). - Fixed the description of cRingBufferLinear (thanks to Ludwig Nussel for pointing out this one). - Fixed cRingBufferLinear::Get() in case the buffer wraps around (thanks to Ludwig Nussel for reporting this one).
2004-05-16Version 1.3.7vdr-1.3.7Klaus Schmidinger
- Fixed a memory leak in thread handling when using NPTL (thanks to Jon Burgess). - Fixed handling Setup.RecordDolbyDigital, which was broken since version 1.1.6. - Fixed handling text lengths for itemized EPG texts (thanks to Marcel Wiesweg). - Fixed the help for LSTE and LSTR (was broken in 1.3.6). - Improved iso8859-7 fonts (thanks to Dimitrios Dimitrakos). - Added some 3-letter language codes (thanks to Marcus Mönnig). - Added language code handling to the subtitling descriptor in 'libsi' (thanks to Pekka Virtanen). - Moved several menu item classes from menu.c to menuitems.[hc] to make them available for plugins. - The epg2html.pl script now handles '|' in description texts. - The new setup option "OSD/Use small font" can be used to control the use of the small font (see MANUAL for details). - Swapped osd.[hc] and osdbase.[hc] to have the virtual OSD base class named cOsd. Plugins may need to adjust their #include statements. - Colors are now given as AARRGGBB instead of AABBGGRR. The values are mapped to the driver's (wrong) sequence in dvbosd.c (this should really be fixed in the driver, together with the endian problem). - The new OSD setup parameters "Left" and "Top" can be used to define the top left corner of the OSD. - The OSD size parameters are now in pixel (as opposed to formerly characters). When reading a 'setup.conf' file from an older version of VDR, the OSDwidth and OSDheight values will be converted to pixel automatically. - The OSD is now fully device independent. See the comments in VDR/osd.h and the description in PLUGINS.html for information on how a plugin can implement an OSD display on arbitrary hardware. - The OSD (actually its cBitmap class) can now handle XPM files. There are several XPM files in the VDR/symbols directory which can be used by skins (some of these have been taken from the "elchi" patch). See VDR/skinsttng.c for examples on how to use these. - Due to the changes in the OSD handling the DEBUG_OSD option for a textual OSD has been dropped. There will be a plugin that implements a skin with this functionality later. - The entire OSD display can now be implemented via "skins". See VDR/skins.[hc], VDR/skinclassic.[hc], VDR/skinsttng.[hc] and PLUGINS.html for information on how a plugin can implement its own skin. By default VDR comes with a "Classic" skin that implements the OSD display known from previous versions, and the new skin named "ST:TNG Panels", which is also the default skin now. The actual skin can be selected through "Setup/OSD/Skin". - The colors used in a skin can now be configured using "themes". See PLUGINS.html for information on how a skin can make use of themes, and man vdr(5) for the structure of a theme file. The actual theme to use can be selected through "Setup/OSD/Theme". - Added Croatian language texts (thanks to Drazen Dupor). NOTE: there is apparently a problem with the newly introduced iso8859-2 font, because as soon as Setup/OSD/Language is set to Croatian (currently the last one in the list) everything freezes and the vdr processes have to be killed with -9 and the driver needs to be reloaded. Maybe somebody else can find out what's going wrong here... - Added missing NULL checks when accessing sectionHandler in device.c (thanks to Pekka Virtanen). - Fixed setting the time from the DVB data stream (thanks to Helmut Auer for pointing out a frequency/transponder handling mixup). This now also takes the actual source (sat, cable etc.) into account. Please go into "Setup/EPG" and set the "Set system time" and "Use time from transponder" parameters accordingly (this is necessary even if you have already set them before!).
2004-03-14Version 1.3.6vdr-1.3.6Klaus Schmidinger
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed some descriptor handling in 'libsi' (thanks to Stéphane Esté-Gracias). - Fixed handling the current menu item (thanks to Marc Hoppe). - Fixed assigning events to timers (they no longer get "stuck"). - Added log entries whenever the running status of an event changes (currently only logging the first 30 channels). - Fixed handling timers in VPS margin if the EPG scan is turned on (the EPG scan switched the device away from the channel, so it wouldn't see the change of the running status). - Fixed handling "itemized" texts in EPG data (thanks to Stéphane Esté-Gracias for pointing out this problem, and Marcel Wiesweg for improving 'libsi'). - Fixed handling VPS times at year boundaries. - Avoiding too many consecutive "ring buffer overflow" messages (which only slowed down performance even more). - Taking the Sid into account when detecting version changes in processing the PMT (thanks to Stéphane Esté-Gracias for pointing out this problem). - Completed the Russian OSD texts (thanks to Vyacheslav Dikonov). - Any newline characters in the 'description' of EPG events are now preserved to allow texts to be displayed the way the tv stations have formatted them. This was also necessary to better display itemized texts. - Fixed detecting the running status in case an empty EPG event is broadcast (thanks to Michael Pennewiß for pointing this out). - Improved performance when paging through very long menu lists. - Removed cSchedule::GetEventNumber() and cSchedule::NumEvents(). There is now cSchedule::Events() that returns the list of events directly. - Avoiding occasional bad responsiveness to user interaction caused by assigning events to timers. - Now explicitly turning on the LNB power at startup, because newer drivers don't do this any more (thanks to Oliver Endriss for pointing this out).
2004-02-29Version 1.3.5vdr-1.3.5Klaus Schmidinger
- Fixed reading the EPG preferred language parameter from 'setup.conf'. - Fixed switching to a visible programme in case the current channel has neither a video nor an audio PID. - Fixed editing channels (SID now range checked) and creating new channels (NID, TID and RID are now set to 0). - Fixed transponder handling to make it work with satellites that provide two transponders on the same frequency, with different polarization, like Hispasat at S30.0W (thanks to Thomas Bergwinkl for pointing this out). See man vdr(5) for details about the enhanced channel ID format. - Since there appears to be no general solution for the UPT error yet, a recording now initiates an "emergency exit" if the number of UPT errors during one recording exceeds 10 (suggested by Gregoire Favre). Since the UPT error doesn't happen on my system, this has not been explicitly tested. The "preliminary fix" for the UPT error in VDR/dvbdevice.c has been disabled by default, since it makes channel switching unpleasently slow. If you want to have that workaround back, you can uncomment the line //#define WAIT_FOR_LOCK_AFTER_TUNING 1 in VDR/dvbdevice.c. - Adapted the 'sky' plugin to use the actual channel IDs, and to fetch EPG data from www.bleb.org. - Limited automatic retuning to devices that actually provide the transponder (necessary for the 'sky' plugin). - Fixed handling receivers in the 'sky' plugin, so that a recording on the same channel won't interrupt an ongoing Transfer Mode. - Added subtable ID and TSDT handling to 'libsi' (thanks to Marcel Wiesweg). - Fixed some Russian OSD texts (thanks to Vyacheslav Dikonov). - Added the 'running status' to the EPG events. This is necessary for implementing the VPS function for recording. - Removed the obsolete 'present' and 'following' handling from the EPG data. - The EPG data is now always kept sorted chronologically in the internal data structures. This also means that any EPG data retrieved through the SVRDP command LSTE is guaranteed to be sorted by start time. - Now using the 'running status' in the channel display, so that a programme that has an end time that is before the current time, but is still running, will still be shown in the display (provided the broadcasters handle the 'running status' flag correctly). This also applies to programmes that have a start time that is in the future, but are already running. - Implemented an "EPG linger time", which can be set to have older EPG information still displayed in the "Schedule" menu (thanks to Jaakko Hyvätti). - Added PDCDescriptor handling to 'libsi'. - Implemented handling the VPS timestamps (aka "Programme Identification Label") for full VPS support for timers (provided the tv stations actually broadcast this information). The VPS time is displayed in the event info page if it exists and is different than the event's start time. - Extended the SVDRP command LSTE to allow limiting the listed data to a given channel, the present or following events, or events at a given time (thanks to Thomas Heiligenmann). - Fixed a typo in libsi/si.h (thanks to Stéphane Esté-Gracias). - Timers can now be set to use the VPS information to control recording a programme. The new setup options "Recording/Use VPS" and "Recording/VPS margin", as well as the "VPS" option in the individual timers, can be used to control this feature (see MANUAL for details). Note that this feature will certainly need a lot of testing before it can be called "safe"! - The "Schedule" and "What's on now/next?" menus now have an additional column which displays information on whether there is a timer defined for an event, whether an event has a VPS time that's different than its start time, and whether an event is currently running (see MANUAL under "The "Schedule" Menu" for details).
2004-02-08Version 1.3.4vdr-1.3.4Klaus Schmidinger
- Fixed handling language codes in case there is no audio or Dolby PID. - Fixed handling CA ids (was broken in 1.3.3). - Fixed the SVDRP command 'STAT DISK' to avoid a 'division by 0' in case the disk is full (thanks to Jens Rosenboom). - Fixed handling bitmap indexes for 256 color mode (thanks to Andreas Regel). - Now handling "linked services" (based on the 'autopid' patch from Andreas Schultz). Linked channels are detected and added to 'channels.conf', but currently they are not yet presented to the user other than being in the normal channel list (this will come later). - Preliminary fix for the "Unknown picture type error" (thanks to Sascha Volkenandt for his support in debugging this one). This may slow down switching between channels on different transponders for now, but a better solution will come later. - Fixed the validity check for channel IDs, because some providers use TIDs with value 0 (thanks to Thomas Bergwinkl). - Enabled switching to a channel even if it has no Vpid or Apid set, because these might be automatically set when tuned to that transponder. - No longer closing the Channels menu after trying to switch to a channel that is currently not available. - Removed the now obsolete CaCaps stuff. The Setup/CICAM menu now displays the actual CAM type as reported by the CAM. The 'ca.conf' file has been stripped down to the values 0..4.
2004-01-18Version 1.3.2vdr-1.3.2Klaus Schmidinger
- Fixed resetting the EPG data versions after changing the preferred languages (thanks to Teemu Rantanen for reporting this one and helping to debug it). - Added LinkageDescriptor handling to 'libsi' (thanks to Marcel Wiesweg). - Added Russian language texts (thanks to Vyacheslav Dikonov). Plugin authors may want to add the new entries to their I18N texts and contact the translators to have their texts translated. Note that there are now 17 different OSD languages, so please make sure you have 17 versions for each of your texts. - Some corrections and additions to the Finnish OSD texts (thanks to Rolf Ahrenberg and Niko Tarnanen). - Fixed a wrong 'delta' value in the call to the shutdown script (thanks to Stephan Epstein for reporting this one). - Activated detection of radio channels (to avoid reports about "channels not being detected that used to be detected with the 'scan' utility or the original 'autopid' patch ;-). - Channels with a zero VPID no longer write a PPID into channels.conf. - Short channel names are now only stored if they actually differ from the full name. - The EPG scan now scans newly found transponders together with already existing ones. - The "Red" button in the "Setup/EPG" menu can now be used to force an EPG scan on a single DVB card system (see MANUAL for details). - The new SVDRP command 'SCAN' can be used to force an EPG scan on a single DVB card system (see MANUAL under Setup/EPG for details). - Fixed handling PID changes in 'Transfer Mode'. - Excess blanks in channel names read from the SDT are now removed. - Fixed wrong parameter settings when scanning NITs for terrestrial transponders (thanks to Christian Tramnitz for pointing out this one). - Fixed some out of bounds parameter settings when scanning NITs for cable and satellite transponders. - Added 'libsi' include files to the 'include' directory, so that plugins can use them (thanks to Marcel Wiesweg). - Now only processing NITs that contain the transponder they are actually broadcast on. - Fixed setting the source type for newly detected terrestrial transponders (thanks to Christian Tramnitz for his support in debugging this).
2004-01-04Version 1.3.0vdr-1.3.0Klaus Schmidinger
- Changed thread handling to make it work with NPTL ("Native Posix Thread Library"). Thanks to Jon Burgess, Andreas Schultz, Werner Fink and Stefan Huelswitt. - The cThread class now accepts a 'Description' parameter, which is used to log the beginning and end of the thread, together with its process and thread id. For descriptions that need additional parameters you can use the function cThread::SetDescription(), which accepts 'printf()' like arguments. Existing plugins that use threads should be changed to use this functionality instead of explicit 'dsyslog()' calls inside their Action() function in order to support logging the thread ids. - Added "Slovak Link" and "Czech Link" to 'ca.conf' (thanks to Emil Petersky). However, 'ca.conf' is now pretty much obsolete due to the automatic CA handling. - Mutexes are now created with PTHREAD_MUTEX_ERRORCHECK_NP, which makes the 'lockingTid' stuff obsolete (thanks to Stefan Huelswitt). - Changed font handling to allow language specific character sets. - Adopted the small font character set from the "Elchi" patch (originally provided by Alessio Sangalli). - Greek language texts now use iso8859-7 character set (thanks to Dimitrios Dimitrakos). - Rearranged section data handling, so that the actual data handling can be done separately, even from within plugins. - The EPG data structures have been moved from eit.[hc] to epg.[hc] and have been adapted to the general VDR coding style. Plugins that use these data structures may need to change some function names (which should be obvious). The name 'subtitle' has been changed to 'shortText' to avoid clashes with actual subtitles that are part of a movie. The name 'extendedDescription' has been shortened to 'description'. - Replaced 'libdtv' with 'libsi' (thanks to Marcel Wiesweg), which is thread safe and can be used by multiple section filters simultaneously. - Added 'cRwLock' to 'thread.[hc]'. Note that all plugin Makefiles need to define _GNU_SOURCE for this to work (see the example plugin Makefiles and 'newplugin'). - Fixed a problem with crc32 in SI handling on 64bit systems (thanks to Pedro Miguel Sequeira de Justo Teixeira for reporting this one). - Fixed an alignment problem in CAM access on 64bit systems (thanks to Pedro Miguel Sequeira de Justo Teixeira for reporting this one). - Added 'StreamType' setting to CAM communication, which is important for Aston/SECA CAMs (thanks to Antonino Sergi). - Now the CA descriptors are sent to the CAM in the 'program' or 'ES level' sections, depending on where they are found in the PMT (thanks to Hans-Peter Raschke for reporting this one). This should make SkyCrypt CAMs work. - Now using the 'version number' of EPG events to avoid unnecessary work. - Channel data is now automatically derived from the DVB data stream (inspired by the 'autopid' patch from Andreas Schultz). - The current channel is now automatically re-tuned if the PIDs or other settings change. If a recording is going on on a channel that has a change in its settings, the recording will be stopped and immediately restarted to use the new channel settings. - EPG events now use the complete channel ID with NID, TID and SID. - Channel names in 'channels.conf' can now have a short form, as provided by some tv stations (see man vdr(5)). Currently channels that provide short names in addition to long ones are listed in the OSD as "short,long name", as in "RTL,RTL Television". The short names will be used explicitly later. - The Ca parameter in 'channels.conf' has been extended and now contains all the CA system ids for the given channel. When switching to a channel VDR now tests for a device that provides one of these CA system ids. The devices automatically get their supported ids from the CI handler. - The values in 'ca.conf' are currently without any real meaning. Whether or not a channel with conditional access can be received is now determined automatically by evaluating its CA descriptors and comparing them to the CA system ids provided by the installed CAM. Only the special values 1-16 are used to assign a channel to a particular device. - Increased the maximum number of possible OSD colors to 256. - Limited the line length in the EPG bugfix report, which appears to fix a buffer overflow that caused a crash when cleaning up the EPG data (at 05:00 in the morning).
2003-08-31Version 1.2.5pre1vdr-1.2.5pre1Klaus Schmidinger
- Now explicitly handling exit value 0 and 2 in 'runvdr'. - Added a missing 'w' to the allowed characters for Finnish and Swedish (thanks to Lauri Tischler and Ragnar Sundblad). - Added channels for DVB-T Hannover (Germany) to channels.cont.terr (thanks to Peter Waechtler). - Fixed a hangup in SVDRP when the client disappears without sending QUIT (thanks to Robert Bartl for reporting this one). The problem was introduced in version 1.2.2 through the fix for an occasional "Broken pipe" error in SVDRP connections. - Updated 'channels.conf.terr' for Berlin. - Fixed displaying still pictures, now using the driver's VIDEO_STILLPICTURE call directly (thanks to Oliver Endriss). This also improves navigating through DVD menus with the DVD plugin. If this causes problems with your particular system (maybe because you are using the 'analogtv' plugin) you can reactivate the previous behaviour by commenting out the line #define VIDEO_STILLPICTURE_WORKS_WITH_VDR_FRAMES in VDR/dvbdevice.c. Note that you need driver version 2003-08-23 or later for this to work! - Fixed handling extra blanks in plugin command lines. - Actually implemented the SVDRP command DELC. - Now clearing the player device if there are too many poll timeouts in 'Transfer Mode', which avoids buffer overflows and black screens in such cases.
2003-08-03Version 1.2.2vdr-1.2.2Klaus Schmidinger
- Fixed a bug in channel switching after Left/Right has been pressed (thanks to Michael Walle for reporting this one). - Improved channel switching in case of numerical input by switching as soon as the channel is unique (suggested by Jaakko Hyvätti). - Fixed creating a new channel in the "Channels" menu in case the 'channels.conf' contains ':@nnn' lines with no text (thanks to Guy Roussin for reporting this one). - Changed the behaviour of the '0' key in normal viewing mode so that a channel only qualifies as "previous" if it has been selected for at least 3 seconds (suggested by Thomas Keil). - Now clearing the channel info display when entering numeric keys to switch channels (suggested by Guy Roussin). - Added missing I18N entry for "Ppid" (thanks to Rolf Ahrenberg). - Fixed handling the color buttons in the "Edit channel" menu (thanks to Thomas Keil for reporting this one). - Fixed an occasional "Broken pipe" error in SVDRP connections (thanks to Gerhard Steiner for reporting this one). - Fixed checking CA capabilities with the dvb-kernel driver (thanks to Kenneth Aafløy). - Fixed selecting the device, because sometimes an FTA recording terminated a CA recording (thanks to Emil Naepflein). - Fixed a possible crash in case a VFAT file system is used without compiling VDR with VFAT=1 (thanks to Ernst Fürst for reporting this one). - Now the program uses the values of VIDEODIR and PLUGINDIR defined in Makefile or Make.config as defaults (thanks to Steffen Barszus). - Added the usual menu timeout to the CAM menus.
2003-06-09Version 1.2.1vdr-1.2.1Klaus Schmidinger
- Fixed OSD access in case none of the devices provides one (thanks to Axel Gruber for reporting this one). - Fixed editing channels ('timers.conf' was not written after a channel has been modified, which could result in errors upon the next start of VDR). - Fixed a crash when canceling a newly created timer (thanks to Thomas Schmidt for reporting this one). - Completed Hungarian language texts (thanks to Istvan Koenigsberger and Guido Josten). - Fixed device handling in the CICAM menu in case a VDR instance was started with a specific device using the -D option (thanks to Gerald Raaf for reporting ths one). - Initializing the current channel to '1' to avoid a crash in creating a new timer in case there is no device in the system that can actually receive any channel (thanks to Malcolm Caldwell for reporting this one). - Some corrections to the Finnish OSD texts (thanks to Niko Tarnanen and Rolf Ahrenberg).
2003-04-27Version 1.1.29vdr-1.1.29Klaus Schmidinger
- Fixed detecting broken connection to the LIRC daemon (thanks to Ludwig Nussel). - Now sending CA descriptors to the CAM in the same sequence as they were originally received (thanks to Stefan Huelswitt). - The PCR PID can now be set separately from the video PID. The syntax in the 'channels.conf' file is, for example, ...:164+17:..., where 164 is the video PID and 17 is the PCR PID. The separator is a '+' sign, not a comma or semicolon as with the audio PIDs, because this is not an alternate PID, but rather an additional, necessary PID. In order to use this feature you need a driver version dated 2003-04-27 or higher (setting the PCR PID didn't work in earlier versions). - Fixed deleting the last recording in the "Recordings" menu, which started pausing live video (thanks to Christoph Friederich for reporting this one). - Now setting the "broken link" flag for GOPs at the beginning of a new video sequence, which avoids artefacts when cutting (thanks to Stefan Huelswitt). - Removed the Mute() call from cDvbDevice::StillPicture() (suggested by Andreas Schultz). - Updated 'channels.conf.terr' for Berlin (thanks to Andreas Brachold). - Extended logging info when starting/stopping timers to show the channel number, start/stop time and the file name (suggested by Manuel Hartl). - Added a note regarding non-VDR files in the /videoX directories to INSTALL (suggested by Benjamin Harling). - Skipping keys that come in too fast from LIRC (thanks to Christian Jacobsen). - Avoiding short display of the main menu if a plugin displays its own OSD and is started through a user defined key macro (thanks to Andreas Mair for reporting this one). - Reduced the time to wait for EPG data when starting a recording to 3 seconds. - The new SVDRP command STAT can be used to request information about the disk usage (thanks to Thomas Koch). - Fixed faulty calculation of section length in eit.c (thanks to Teemu Rantanen).
2003-01-10Version 1.1.21vdr-1.1.21Klaus Schmidinger
- Fixed the 'channels.conf' entries for "Studio Universal" and "Disney Channel". - Fixed handling channels in the "Channels" menu in case there are ':@nnn' group separators without names (thanks to Guy Roussin for reporting this one). - The SVDRP command CHAN now also accepts channel IDs. - Increased the timeout until an index file is considerd no longer to be written (sometimes in time shift with heavy system load the index file was closed too early by the replay thread). - Implemented "Link Layer" based CAM support, which hopefully will solve the problems with CAMs we had in the past. To use this you need the driver version 2002-01-08 or higher (with the new firmware supporting the "Link Layer" protocol). - Added an EPG bugfix that moves the Subtitle data to the Extended Description in case the latter is empty and the Subtitle exceeds some useful length. - Since several channels put very long strings into the Subtitle part of their EPG data, that string is now limited in length when used in a recording's file name.
2002-11-10Version 1.1.16vdr-1.1.16Klaus Schmidinger
- Fixed saving the polarization parameter of channels that have a number in the 'source' parameter (thanks to Peter Seyringer for reporting this one). - Updated 'channels.conf.terr' (thanks to Andy Carter). - Updated 'channels.conf.cable' (thanks to Achim Lange). - First step towards a "unique channel ID". The channel ID is a human readable string, made up from several parameters of the channel's definition in the file 'channels.conf' (see man vdr(5) for details). In order for the "unique channel ID" to work, all channel definitions now must be unique with respect to the combination of their Source, Frequency and SID parameters. You may have to fix your 'channels.conf' manually if there are error messages in the log file when loading it. BE SURE TO MAKE A BACKUP COPY OF YOUR 'channels.conf' AND 'timers.conf' FILE BEFORE SWITCHING TO THIS VERSION, AND CHECK VERY CAREFULLY WHETHER YOUR TIMERS ARE STILL SET TO THE RIGHT CHANNELS! When reading an existing 'timers.conf', the channels will be identified as before by their numbers. As soon as this file is written back, the channel numbers will be replaced by the channel IDs. After that it is possible to manually edit the 'channels.conf' file and rearrange the channels without breaking the timers. Note that you can still define new timers manually by using the channel number. VDR will correctly identify the 'channel' parameter in a timer definition and use it as a channel number or a channel ID, respectively. Also, the SVDRP commands that return timer definitions will list them with channel numbers in order to stay compatible with existing applications. The channel ID is also used in the 'epg.data' file to allow EPG information from different sources to be stored, which would previously have been mixed up in case they were using the same 'service ID'. Note that the contents of an existing 'epg.data' file from a previous version will be silently ignored, since it doesn't contain the new channel IDs. When inserting EPG data into VDR via SVDRP you now also need to use the channel IDs. Currently the EPG data received from the DVB data stream only uses the 'Source' and 'Service ID' part of the channel ID. This makes it work for channels with the same service IDs on different sources (like satellites, cable or terrestrial). However, it doesn't work yet if the service IDs are not unique within a specific source. This will be fixed later. - Added missing SID parameters to 'channels.conf'. Some channels have been removed since they are apparently no longer broadcasted. - Removed dropping EPG events from "other" streams that have a duration of 86400 seconds or more (was introduced in version 1.1.10). This has become obsolete by the modification in version 1.1.13, which fixed fetching the current/next information to handle cases where the duration of an event is set wrongly and would last beyond the start time of the next event. Besides, the change in 1.1.10 broke handling EPG data for NVOD channels. - Fixed a compiler warning regarding cMenuChannels::Del() and MenuTimers::Del() hiding the base class virtual functions.
2002-10-27Version 1.1.14vdr-1.1.14Klaus Schmidinger
- Fixed some faulty default parameter initializations (thanks to Robert Schiele). - Added further satellites to 'sources.conf' (thanks to Reinhard Walter Buchner and Oliver Endriss). - Updated Finnish OSD texts (thanks to Jaakko Hyvätti). - Fixed a small glitch when switching channels (thanks to Dennis Noordsij for reporting this one). - Fixed handling multiple 'CaCaps' entries in 'setup.conf'. - Group separators in 'channels.conf' may now be given like ':@201 My Channels', where '@201' indicates the number to be given to the next channel. This can be used to create 'gaps' in the channel numbering (see 'man 5 vdr'). BE CAREFUL TO UPDATE YOUR 'timers.conf' ACCORDINGLY IF INSERTING THIS NEW FEATURE INTO YOUR 'channels.conf' FILE! - Timers now internally have a pointer to their channel (this is necessary to handle gaps in channel numbers, and in preparation for unique channel ids). - Fixed slow reaction on SVDRP input (thanks to Guido Fiala for reporting this one). - Added KI.KA to channels.conf.cable (thanks to Robert Schiele). - Frequency values for cable and terrestrial channels in 'channels.conf' can now be given either in MHz, kHz or Hz. The actual value given will be multiplied by 1000 until it is larger than 1000000. - Fixed skipping unavailable channels when zapping downwards. - Fixed checking the Ca() status of a cDevice (thanks to Stefan Huelswitt). - Fixed switching audio tracks in 'Transfer Mode' on the primary DVB device (thanks to Steffen Barszus and Stefan Huelswitt for reporting this one and helping to fix it). - Fixed channel switching in case of an active 'Transfer Mode' on the primary device ('Transfer Mode' is now launched with priority '-1'). - Fixed a ternary expression in dvbspu.c. - Fixed handling 'Transfer Mode' on single device systems when recording an encrypted channel (thanks to Stefan Huelswitt). - Fixed blocking replaying in case an encrypted channel is being recorded on the primary device. - Now the name of the remote control is displayed when learning the keys. - Fixed learning remote control keys in case there is more than one remote control (thanks to Oliver Endriss for reporting this one). - Implemented additional dedicated keys for "Play", "Pause", "Stop", "Record", "FastFwd", "FastRew", "Channel+" and "Channel-". If your remote control supports any of these keys you can delete your 'remote.conf' file and restart VDR to go through the key learning procedure again in order to assign these new keys. See MANUAL for more information. Authors of player plugins should update their ProcessKey() functions so that the new player keys have the same functionality as the "Up", "Down", "Left", "Right" and "Blue" keys, respectively. Note that the existing functionality of these keys should by all means be retained, since VDR (and any plugins) shall be fully usable with just the basic set of keys. These new keys are only for additional comfort in case the remote control in use supports them. - Implemented new keys to directly access the VDR main menu functions "Schedule", "Channels", "Timers", "Recordings", "Setup" and "Commands". If your remote control provides keys you want to assign these functions to, you can delete your 'remote.cof' file and restart VDR to go through the key learning procedure again in order to assign these new keys. See MANUAL for more information. - The new configuration file 'keymacros.conf' can be used to assign macros to the color buttons in normal viewing mode, as well as to up to 9 user defined keys. See MANUAL and man vdr(5) for more information. The default 'keymacros.conf' implements the functionality of the "color button patch". - Fixed a crash when learning the keys of several remote controls and pressing buttons of those that have already been learned (thanks to Oliver Endriss for reporting this one).
2002-10-13Version 1.1.13vdr-1.1.13Klaus Schmidinger
- Added cDevice::DeviceNumber() to get the number of a device, not counting any gaps that might be in the index count. - Fixed fetching the current/next information to handle cases where the duration of an event is set wrongly and would last beyond the start time of the next event. - Adapted type names to the new HEAD version of the driver (which the previous NEWSTRUCT branch has been merged into). Note that to use this driver version you still need to add NEWSTRUCT=1 to the make call when building VDR. You need a HEAD version of the LinuxDVB driver dated 2002-10-11 or later to compile VDR with NEWSTRUCT=1. - Fixed radio channels in channels.conf.cable (thanks to Robert Schiele and Uwe Scheffler). - Fixed switching the video format in the Setup/DVB menu (thanks to Uwe Scheffler for reporting this one). - Reactivated full handling of second audio PID (even in 'Transfer Mode'). - Fixed a crash when closing down with remote control plugins (thanks to Oliver Endriss helping to debug this one). - Commands in the file 'commands.conf' can now have a '?' at the end of their title, which will result in a confirmation prompt before executing the command. - Changed a few leftover 'new char[...]' to MALLOC(char, ...). - If a command executed from the "Commands" menu doesn't return any output, the OSD will now be closed automatically. - The SVDRP command PUTE now triggers an immediate write of the 'epg.data' file (suggested by Gerhard Steiner). - The new configuration file 'reccmds.conf' can be used to define commands that shall be executed from the "Recordings" menu; see MANUAL and 'man vdr(5)' for details (suggested by Gerhard Steiner).
2002-10-06Version 1.1.12vdr-1.1.12Klaus Schmidinger
- Fixed a missing Flush() call in the remote control learning procedure (thanks to Oliver Endriss). - Modified channel handling to cover all parameters necessary for DVB-C and DVB-T (see man vdr(5) for the meaning of the additional parameters stored in the field previously named 'polarisation'). Thanks to Uwe Scheffler and Andy Carter for testing. If you have a system with different kinds of DVB cards, like DVB-T and DVB-C, for instance, there is no more need to distinguish the channels through the 'Ca' parameter in order to assign them to the various DVB cards. This is now taken care of by the "source" parameter. So a channel marked as "terrestrial", for example, will only be received on DVB-T cards. Note that the cChannel class has been moved into a separate file (channels.[ch]), and that all data members have been made private and are now only accessible through member functions. You may have to change any plugin code that accesses cChannel data accordingly. - The new configuration file 'sources.conf' contains the various signal sources (satellites, cable and terrestrial) which are used in 'channels.conf' and 'diseqc.conf' (thanks to Reinhard Walter Buchner for adding some satellites to 'sources.conf' and Oliver Endriss and Lauri Tischler for testing and debugging). - The 'diseqc' parameter in the channel definitions has been redefined to hold the "source" of the given channel (which can be either a satellite, cable or terrestrial). For compatibility with channels.conf files from older versions, numeric values in this parameter will be tolerated, but they have no meaning. If you want to use DiSEqC you will need to replace these old values with the proper source identifiers defined in the new configuration file 'sources.conf'. See how this is done in the 'channels.conf' file that comes with the VDR package. - The new configuration file 'diseqc.conf' can be used to set up the individual diseqc configuration (see man vdr(5) for a description of the file format). - The "Edit channel" menu has a new entry "Source:" in which the source of this channel can be selected (either a satellite, cable or terrestrial). The set of parameters at the end of this menu will change according to the type of source. - The "Use DiSEqC" parameter in the "Setup/LNB" menu has been moved to the beginning of the list and disables the rest of the parameters when set to "yes", since these are now only meaningful if DiSEqC is _not_ used. - Removed some unnecessary #includes from eit.c and changed cMenuRecordings::Del() to cMenuRecordings::Delete() to avoid warnings in gcc-3.2 (thanks to Andreas Schultz for pointing this out). - Improved skipping channels that are (currently) not available (thanks to Stefan Huelswitt). - Updated channels.conf.terr and channels.conf.cable (thanks to Uwe Scheffler). - Fixed a bug when pressing the "Blue" button in the main menu without having displayed it (thanks to Oliver Endriss for reporting this one).
2002-09-29Version 1.1.11vdr-1.1.11Klaus Schmidinger
- Fixed an incomplete initialization of the filter parameters in eit.c (thanks to Jeremy Hall). - Fixed the 'newplugin' script for use with the NEWSTRUCT driver (thanks to Andreas Schultz for reporting this one). If you have already created a plugin directory and Makefile with 'newplugin', please apply the following patch to it: ------------------------------------------------------- --- Makefile 2002/06/10 16:24:06 1.4 +++ Makefile 2002/09/17 15:36:36 1.5 @@ -15,7 +15,12 @@ ### The directory environment: +ifdef NEWSTRUCT +DVBDIR = ../../../../DVB/include +DEFINES += -DNEWSTRUCT +else DVBDIR = ../../../../DVB/ost/include +endif VDRDIR = ../../.. VDRINC = $(VDRDIR)/include LIBDIR = ../../lib @@ -34,7 +39,7 @@ INCLUDES = -I$(VDRINC) -I$(DVBDIR) -DEFINES = -DPLUGIN_NAME_I18N='"$(PLUGIN)"' +DEFINES += -DPLUGIN_NAME_I18N='"$(PLUGIN)"' ### The object files (add further files here): ------------------------------------------------------- This is the diff for the 'setup' example that comes with VDR, so your line numbers may be different. - Added a missing 'public' keyword in device.h (thanks to Martin Hammerschmid). - Fixed a race condition when starting 'Transfer Mode'. - Rearranged the remote control key handling to allow plugins to implement additional types of remote controls (see PLUGINS.html, section "Remote Control"). The previously used files 'keys.conf' and 'keys-pc.conf' have been replaced by the file 'remote.conf', which holds the key definitions of all remote controls. - The LIRC remote control keys are now handled just like the keyboard and RCU keys. This means that you can use the lircd.conf file as is for your remote control, without the need of editing it to make the key names the same as used in VDR. When first starting VDR it will go into the "Learning keys" mode and ask you to press the various keys. The resulting key assignment will be stored in the file 'remote.conf'. Since I have no way of testing the LIRC support, I hope I didn't break it in the process... - While learning the remote control keys it is now possible to press the 'Menu' key to skip the definition of keys that are not available on your particular RC unit. - Fixed handling DVD subtitles in the SPU decoder (thanks to Andreas Schultz). - Avoiding restarts due to 'panic level' when switching channels on the primary device during EPG scan.
2002-09-08Version 1.1.9vdr-1.1.9Klaus Schmidinger
- Fixed the 'newplugin' script to make it name the target for creating the distribution package 'dist', as stated in the PLUGINS.html documentation. If you have already created a plugin source directory and Makefile you may want to check it and replace the 'package' target with 'dist' if necessary. - Changed device handling for being able to do simultaneous recording and replay on the same device (Time Shifting). In order for this to work you need to use a driver with a firmware version that has this feature implemented. - cDevice::ProvidesCa() is no longer virtual. The new function cDevice::ProvidesChannel() is now used to determine whether a device can receive a given channel, and by default this function returns false. So a device that is a pure replaying device doesn't need to do anything here. - Increased the recorder buffer size to 5MB in order to be able to better handle multiple recordings. - Implemented cTSBuffer for better handling TS packet buffering in derived cDevice classes. - Changed the interface if cDevice::GetTSPacket() to avoid unnecessary copying of data. - Removed cDevice::Channel(), since this makes no more sense with devices receiving multiple channels. - Switching through channels with the 'Up' and 'Down' keys now skips channels that are currently not available (for instance because all devices are recording and these channels are on different transponders). - Implemented an SPU decoder (thanks to Andreas Schultz). - Fixed a crash when entering an integer value outside the limits (thanks to Stefan Huelswitt for reporting this one). - Added play mode pmAudioOnlyBlack (thanks to Stefan Huelswitt).
2002-08-25Version 1.1.8vdr-1.1.8Klaus Schmidinger
- Fixed replaying the last few seconds of a recording. - Added some missing #includes to files in libdtv for gcc 3.2 (thanks to Jürgen Zimmermann). - Added cDevice::NewOsd() to allow a derived cDevice class to implement its own OSD capabilities (thanks to Andreas Schultz). - Added cPalette::AllColors() for plugins that need to get the color entries of a cPalette (see osdbase.h). - The new SVDRP command CLRE can be used to clear the entire EPG data (suggested by Matthias Schniedermeyer). - Fixed handling one-shot timers that were already recording and had their start time changed into the future (thanks to Matthias Schniedermeyer for reporting this one).
2002-08-16Version 1.1.7vdr-1.1.7Klaus Schmidinger
- Adapted VDR to the NEWSTRUCT driver. To use the new driver, compile VDR with 'make NEWSTRUCT=1' (thanks to Holger Wächtler for some valuable advice). By default it currently still uses the old driver. - Added some missing #includes (thanks to Martin Hammerschmid). - Changed the log error message "can't record MPEG1!" to "error in data stream!", since the mentioning of MPEG1 has irritated many people. - Consistently using malloc/free and new/delete (thanks to Andreas Schultz). - Temporarily made cDevice::ProvidesCa() virtual (Andreas Schultz needs this in his DXR3 plugin). - cDevice no longer exposes a file handle to cPlayer. A derived cPlayer class can now call DevicePoll() to see whether the replay device is ready for further data. A derived cDevice class must implement Poll() and shall check if any of its file handles is ready for data. - Implemented several replay modes to allow players that play only audio (thanks to Stefan Huelswitt). - Improved cCondVar::Wait() and implemented cCondVar::TimedWait() (thanks to Stefan Huelswitt). - VDR no longer gives up if there is no DVB device. It continues to work if there is at least one device, either a DVB device found by the core VDR code itself, or a device implemented by a plugin.
2002-06-16Version 1.1.3vdr-1.1.3Klaus Schmidinger
- Improved the VDR Makefile to avoid a warning if the '.dependencies' file does not exist, and also using $(MAKE) to call recursive makes. - Changed the name of the 'package' target in the plugin Makefiles to 'dist' (following the suggestions in the "GNU Make" manual). If you already have started a plugin project, you may want to change this in your Makefile accordingly. - Improved the plugin Makefile to avoid a warning if the '.dependencies' file does not exist, and also using $(shell...) to get the version numbers. If you already have started a plugin project, you may want to change this in your Makefile accordingly. - Fixed some function headers to make them compile with gcc 3.x (thanks to Gregoire Favre). - Fixed the cutting mechanism to make it re-sync in case a frame is larger than the buffer (thanks to Sven Grothklags). - Added an error message if the directory specified in the '-L' option can't be accessed (suggested by Stefan Huelswitt). - Rearranged OSD class names to make 'cOsd' available for the main OSD interface. - Completely moved OSD handling out of the cDvbApi class, into the new cOsd. - Implemented cStatus to allow plugins to set up a status monitor. See PLUGINS.html for details. - Moved the cEITScanner out of dvbapi.h/.c, into the new eitscan.h/.c. - Added Swedish language texts (thanks to Tomas Prybil). - Fixed parsing 'E' records in epg2html.pl (thanks to Matthias Fechner for pointing out this one). - Removed compiler option '-m486' to make it work on non-Intel platforms. If you have already started a plugin project, you may want to make sure you remove this option from your existing Makefile. - Completely rearranged the recording and replay functions to make them available to plugins. - Replay is now done in a single thread (no more syncing between input and output thread necessary). - It is now possible to record several channels on the same transponder with "budget cards". VDR automatically attaches a recording timer to a card that already records on the appropriate transponder. How many parallel recordings can actually be done depends on the computer's performance. Currently any number of recordings gets attached to a card, so you should carefully plan your timers to not exceed the limit. On a K6-II/450 it was possible to record three channels from transponder 12480 with a single WinTV NOVA-S. - Timers that record two successive shows on the same channel may now overlap and will use the same DVB card. During the time where both timers record the data is simply saved to both files. - The following limitations apply to this version: + Transfer mode doesn't work yet. + The '-a' option (for Dolby Digital audio) doesn't work yet. + Switching between different language tracks doesn't work yet. + Cutting doesn't work yet.
2002-05-13Version 1.1.2vdr-1.1.2Klaus Schmidinger
- Changed the cPlugin::Start() function to return a boolean value that indicates if the plugin will not be able to perform its task (suggested by Stefan Huelswitt). - Added the cPlugin::Housekeeping() function (suggested by Stefan Huelswitt). - Updated channels.conf.cable (thanks to Uwe Scheffler). - Added 'insert' capabilities to cList (suggested by Stefan Huelswitt). - Changed the 'package' target in the plugin's Makefile to produce a package that expands to a directory with just the plugin name and version number (suggested by Stefan Huelswitt). - Made the config directory available to plugins (suggested by Stefan Huelswitt). See PLUGINS.html, section "Configuration files" for details. - Improved the [eid]syslog() macros, so that the LOG_... macros don't need to be given any more.
2002-05-11Version 1.1.1vdr-1.1.1Klaus Schmidinger
- Separated the actual DVB hardware OSD implementation from the abstract OSD interface. 'osdbase.c/.h' now implements the abstract OSD, while 'dvbosd.c/.h' is the actual implementation for the DVB hardware. This is in preparation for allowing additional kinds of OSD hardware implementations. - Fixed leftover references to the file FORMATS in MANUAL and svdrp.c. - Avoiding ambiguities in the cList template class in case one defines a "list of lists" (thanks to Stefan Huelswitt). - Simplified the basic cMenuSetupPage class for easier use in plugins. - Added setup parameters and a Setup menu to the 'hello' plugin example. - Fixed logging error message for unknown config parameters in plugins. - Rearranged cleanup sequence at the end of the main program. - Adapted PLUGINS.html to use the actual code examples from the 'hello' plugin.
2002-04-01Version 1.0.0pre5vdr-1.0.0pre5Klaus Schmidinger
- Fixed restoring CICAM setup values for a fourth DVB card (thanks to Klaus Wolf). - Completed internationalization of OSD texts (thanks to Hannu Savolainen, Arnold Niessen, Paulo Lopes, Jean-Claude Repetto, Alberto Carraro, Matjaz Thaler and Truls Slevigen). - Improved file I/O in case of EINTR, which may occur e.g. with heavy system load (thanks to Werner Fink). - Now writing the title of a recording into the 'summary.vdr' file. - Workaround for displaying still frames with the unpatched LinuxDVB driver (if anybody ever finds out why the unpatched driver doesn't display VDR's still frames, please let me know). - When executing a command from the "Commands" menu, the title of that command is now immediately shown in the status line (followed by "...") to give the user some feedback that the command is being executed, which is especially important if this takes some time. - Fixed scrolling the "Channels" menu in case the cursor ends up on a group delimiter (thanks to Bernd Zierath for helping to debug this one). - Added manual pages vdr(1) and vdr(5) (which made the FORMATS file obsolete). - New command command line option '-V' to display the VDR version. - Adjusting column width for channel numbers in case there are more than 999 channels. - Checking the return value of '...FileRady...' calls in dvbapi.c for better performance under heavy system load. - New 'make' target 'install', which copies the manual pages and executables to their appropriate system locations and creates the /video directory if it doesn't exist yet. - Automatic hotkey assignment is now suppressed if the first entry in commands.conf starts with a digit in the range '1'...'9', followed by a blank. - Fixed a bug in switching back the replay mode display in time shift mode (thanks to Achim Lange for reporting this one). - Fixed a bug in the 'First day' timer parameter for timers that record over midnight. - Added units to Setup parameters. - Changed time entry in the 'Jump' command during replay, so that it is filled up from right to left. - Now using statfs() to determine the amount of free disk space, which avoids the use of an external 'df' command (thanks to Ruben Nunez Francisco). - Fixed skipping the next hit of a repeating timer (thanks to Rainer Zocholl for reporting this one). - Fixed a bug when a timer records over midnight of a day that had a change in Daylight Saving Time. - Added Polish language texts (thanks to Michael Rakowski). - Fixed a bug in parsing group separators in channels.conf (thanks to Henning Holtschneider for reporting this one). - Changed the default 'Ok' key when using the PC keyboard from '5' (in the numeric block) to 'Enter', because the '5' key didn't work on keyboards with the F-keys on top. - Fixed a bug in the EPG bugfix mechanism if the extended description is shorter than 3 characters (thanks to Andreas Schultz).
2002-03-17Version 1.0.0pre4vdr-1.0.0pre4Klaus Schmidinger
- Added 'Ca' code 201 for 'Cryptoworks, GOD-DIGITAL' to 'ca.conf' (thanks to Bernd Schweikert). - Fixed avoiding the primary DVB interface in case Setup.PrimaryLimit is 0. - Fixed handling CICAM settings if the first one of a DVB card was FTA. - Fixed reacting on changes in CICAM settings (needed to restart VDR before). - The "Blue" button in the "Main" menu now works as "Stop" button if a recording is currently being replayed. - New command line option '-m' to mute audio of the primary DVB device at startup (suggested by Mirko Günther). - The new SVDRP command VOLU can be used to control the audio volume (suggested by Mirko Günther). - Fixed resetting 'mute' state when setting the volume to a non-zero value. - Added log messages when deleting recordings in case the disk runs full while recording. - Fixed closing a pipe (used for replaying Dolby Digital audio), which sometimes left 'zombie' processes behind (thanks to Werner Fink for helping to debug this one). - Now starting the Dolby Digital output thread only if the recording actually contains Dolby Digital audio data (thanks to Werner Fink). - Implemented OSD for Volume and Mute (works only if there is no other OSD activity, but this should be no problem for normal use). - Changed the MANUAL description of the "Conditional Access" setup parameters to reflect the actual "CICAM DVBn m" notation in the "Setup" menu. - The new Setup parameter "Use time from transponder" can be used to define which transponder shall be used to set the system time (see MANUAL for details). If you have been using the SetSystemTime option previously, you now MUST select a channel that you trust to have a reliable time base. - Grouped the Setup parameters into several sub-menus, so that each group of parameters fits on a single screen - unless the height of the OSD has been set to a small value (based on code from Markus Lang). - Changed the title of the "Main" menu to "VDR". - Fixed displaying a system message while the replay mode is being shown. - Physically removing a deleted recording if one with the same name shall be deleted again. - The "Left" and "Right" keys are now used to page up and down in text displays (like the EPG descriptions or the results of commands executed from the "Commands" menu). - Fixed high CPU usage in transfer mode. - Replaced 'killproc' with 'killall' in 'runvdr', since apparently 'killproc' is not available by default on some Linux distributions, whereas 'killall' is. Please check if your system provides 'killall' - if it doesn't, please change this back in 'runvdr' and report this (thanks to Achim Lange). - The "Commands" menu now automatically assigns number keys as hotkeys to the commands. If you have preceeded your commands with digits you may want to remove these from your 'commands.conf' file. - The new Setup item "Restart" can be used to force a complete restart of VDR, including reloading the driver. Note that this can only work if VDR and the driver are wrapped into a mechanism that actually performs this action if VDR exits. The 'runvdr' script can be used for this purpose. - Refined texts of the "Setup" menu.
2002-02-24Version 1.0.0pre1vdr-1.0.0pre1Klaus Schmidinger
- Added scanning for EPG data for another 4 days on channels that support this (thanks to Oleg Assovski). - Removed '#define VFAT 1' from recording.c (was a leftover from testing). - Fixed the "Low disk space!" message (thanks to Sergei Haller). - Added the TPID to Hessen-3 in 'channels.conf' (thanks to Sergei Haller). - Fixed a crash when replaying with DEBUG_OSD=1 (thanks to Stefan Huelswitt). - Implemented the "First day" parameter for repeating timers. See FORMATS for information about the enhanced 'timers.conf' file format, and MANUAL for a description of the new item in the "Edit Timer" menu and the enhanced functionality of the "Blue" button in the "Timers" menu. - When deleting a recording that is currently still being recorded, the related timer will now automatically be terminated. If this is a repeating timer, it will receive a "First day" setting that skips the timer for this day. - Fixed closing all unused file descriptors when opening a pipe (thanks to Werner Fink). - Instant recordings now take the EPG data from the point in time at 5 minutes from the start time of the recording. In order for this to work the 'active' parameter of a timer now uses the second bit to indicate that this is an "instant" recording (see FORMATS for details). - Fixed the SVDRP GRAB command in case the video device can't be opened (thanks to Adrian Stabiszewski). - At startup the data written into 'epg.data' is now read into the EPG data structures. In order for this to work, the 'E' record has been extended to (optionally) contain the 'table ID' (see FORMATS for details). - The new SVDRP command PUTE can be used to put EPG data into the EPG list. See FORMATS for details about the required data format. - Taking the German umlauts 'as is' when compiled with VFAT. - The new Setup parameter RecordDolbyDigital can be used to generally turn off recording the Dolby Digital audio channels in case you want to save disk space or don't have the equipment to replay Dolby Digital audio. - Reading the 'setup.conf' file no longer terminates in case of an error, but rather attempts to read the rest of the file. - Removed DVD support from the core VDR source, since the current version from Andreas Schultz is already much further developed (DVD menu navigation) and the concept of "additional players" in VDR is going to change in version 1.1.0, where a new "plugin" interface shall allow the easy implementation of new players without having to patch the core VDR source. Until then, Andreas has agreed to provide his DVD support as a completely external patch. - The contents of the distribution archive now contains the directory name with the current version number, as in 'vdr-1.0.0pre1/...' in order to avoid inadvertently overwriting an existing VDR directory with a new version. - Added a missing error message in SVDRP command LSTC in case the given channel can't be found.
2002-02-03Version 0.99pre5vdr-0.99pre5Klaus Schmidinger
- Updated channel settings for 'N24' (thanks to Andreas Gebel). - Fixed handling hierarchical recordings menu in case of directories starting with the same sequence of characters. - Fixed handling timers on the 29th, 30th or 31st of a month in case the next month has less than 31 days. - Added a description of the sort order of individual episodes in the recordings menu to the MANUAL. - Removed the EPG bugfix for "Title / Subtitle" cleanup. Apparently Pro-7 has finally stopped this nasty habit. - Added some EPG bugfix statistics (printed to the log file every time the EPG data is cleaned up and when VDR is terminated). Maybe somebody in charge of the EPG data at the listed channels will read this and take the necessary actions to fix these things... - Changed the [dei]syslog macros in tools.h to use a variable number of args, thus making it safe to use them in nested 'if/else' statements. - Fixed error handling in establishing an SVDRP connection (thanks to Davide Achilli) for pointing this out). - The new configuration file 'svdrphosts.conf' is now used to define which hosts may access the SVDRP port (by default only 'localhost' has access). See FORMATS for details. - The special keywords TITLE and EPISODE can now be used in timer file names (see MANUAL and FORMATS for details). - The new setup parameter NameInstantRecord can be used to define how an instant recording will be named (see MANUAL for details). - When looking for the EPG record of the timer that starts a recording, now that record is taken which covers the time calculated as 'start + (Setup.MarginStart * 2) + 1)' in order to have a better chance of hitting the right record in case of an instant recording. Timers that start further in the future should always be programmed via the "Schedules" menu. - The special VPIDs '0' and '1' are now used to enable recording radio channels. Actually '0' should be enough, but '1' must be used with encrypted channels (driver bug?). Note, though, that since VDR is mainly a *video recorder*, some features like, e. g., the progress display, may not work as expected with radio recordings. Thanks to Michael Paar. - Fixed a problem with the ERR macro defined by ncurses.h (thanks to Artur Skawina).
2002-01-27Version 0.99pre2vdr-0.99pre2Klaus Schmidinger
- Fixed setting the OSD size in the 'Confirm' interface call (thanks to Deti Fliegl). - Removed the 'read incomplete section...' error message in the EIT processor. - Fixed channel data for "DW TV" (thanks to Axel Gruber). - Added DPID to "PREMIERE MOVIE 1" in channels.conf.cable (thanks to Stephan Schreiber). - Prepared the OSD functions for multiple overlapping windows. - Removed the check to see whether the system time is running linearly. - Improved performance of SVDRP command entry. - Removed EPGBugfixLevel '3' - after more than a year Pro-7 finally managed to broadcast the correct timestamps for EPG events between 0:00 and 6:00! - Fixed failing watchdog timer if program hangs in OSD activities (thanks to Carsten Koch). - No longer requiring 'libncurses' if compiling without DEBUG_OSD=1 and REMOTE=KBD (thanks to Lauri Pesonen). - The "Recordings" menu now displays a hierarchical structure if there are subdirectories for the recordings. This can be controlled through the "RecordingDirs" parameter in the "Setup" menu. See "MANUAL/Replaying a Recording" for details. - Improved speed of setting the Help button texts. - Fixed handling file names that contain single quotes (') or dollar signs ($) in the call to the shutdown command (option '-s') and the recording command (option '-r'). - Improved error handling in the editing process; the resulting file will be deleted if an error occured. - A message is now prompted at the end of the editing process, indicating whether the process succeeded or failed. - Fixed setting the LastActivity timestamp after a shutdown prompt (thanks to Sergei Haller). - A message is now prompted if free disk space becomes low during recording. - The editing process now calls AssertFreeDiskSpace() to remove deleted recordings if the disk becomes full. - The "Main" menu now displays in its title the used disk space (in percent) and the estimated free disk space (in hh:mm), assuming a data rate of 30 MB per minute. - Activating the "Recordings" menu now displays "scanning recordings..." to give the user some feedback in case this takes longer. - Status messages are now displayed centered. - Removed the 'Tools' subdirectory from the VDR archive. All contributed tools can now be found at ftp://ftp.cadsoft.de/pub/people/kls/vdr/Tools.
2001-11-04Version 0.98vdr-0.98Klaus Schmidinger
- Completed storing the current audio volume in the setup.conf file (thanks to Andy Grobb). - Fixed closing the progress display with the "Back" key when in trick mode and Setup.ShowReplayMode is enabled (thanks to Stefan Huelswitt). - New SVDRP commands LSTR and DELR to list and delete recordings (thanks to Thomas Heiligenmann). - Fixed a crash when pressing the '2' button while replaying a DVD. - Updated 'channels.conf' for the "Bundesliga" channels of Premiere World (thanks to Mel Schächner). - Changed the tuning code to use FrontendInfo to detect the type of DVB card. - Removed the recursion stuff from cThread (cMutex already does this). - Fixed handling the repeat function in the channel display. - Avoiding multiple EPG entries for the same event (thanks to Rolf Hakenes for some valuable information on how to do this). - A recording on the primary interface can now be stopped to make it continue on an other free DVB card (if one is free at the moment). See MANUAL for details. - Added some missing teletext PIDs (thanks to Norbert Schmidt). - Added PTS to the converted PCM audio when replaying a DVD (thanks to Andreas Schultz). Now the audio and video of a DVD replayed over the DVB card's A/V out should always be in sync. - Fixed handling the "Power" key in case Setup.MinUserInactivity is set to 0 to disable automatic shutdown. - Added a fifth parameter to the 'shutdown' call that indicates the reason for this shutdown request (see INSTALL). - Fixed releasing 'index' memory after recording or playback. - Fixed ejecting a DVD while it is being replayed. - Removed all video overlay stuff from cDvbApi and SVDRP. Guido Fiala's new 'kvdr' version 0.4 now does these things itself. As a consequence of this you will now need to use kvdr 0.4 or later. - The device /dev/video is now opened only if necessary (to GRAB an image), allowing other programs (like 'kvdr', for instance) to use that device.