| Age | Commit message (Collapse) | Author |
|---|
|
- Implemented a lock file to prevent more than one instance of VDR from removing
files from the video directory at the same time.
- The new setup parameter SplitEditedFiles can be used to control whether or
not the result of an editing process shall be written into separate files.
- Fixed handling repeat function when using LIRC (thanks to Matthias Weingart).
- The shutdown program (defined with the '-s' option) now also gets the channel
number and recording title of the timer (see INSTALL).
- New channel data for 'Premiere One', 'Premiere X-Action', 'Fox Kids Türkce'
and 'N24' (thanks to Andreas Share, Ulrich Röder, Uwe Scheffler and Simon
Bauschulte). Note that if you are using the default 'channels.conf' or
'channels.conf.cable' files you may need to check any exiting timers to see
whether they still use the correct channel number.
- Fixed the "EPG bugfix" (sometimes had duplicate information in Subtitle and
Extended Description).
- Fixed checking for valid video device when setting the video mode.
- The external command 'sort' is no longer required. VDR now sorts the list of
recordings itself, making sure that recordings that stem from repeating timers
are sorted chronologically. Sorting is done according to the setting of the
current locale, so you may want to make sure LC_COLLATE is set to the desired
value (see INSTALL).
- Fixed handling 'newline' characters in EPG texts (thanks to Rolf Hakenes for
an improved version of his 'libdtv').
Newline characters are always mapped to a single "blank" in VDR, because they
would otherwise disturb the Title and Subtitle layout in the channel display
(where these are assumed to be single line texts) and would have to be
specially handled in the 'epg.data' file and the LSTE command in SVDRP.
- Mapping ` ("backtick") characters in EPG texts to ' (single quote).
- Fixed timers starting and ending at unexpected times. 'localtime()' was not
thread safe, now using localtime_r().
- Removed the "system time seen..." message.
- Fixed a bug in the replay mode display when pressing the Green or Yellow
button while in trick mode (thanks to Stefan Huelswitt)
- Closing all open file descriptors when calling external programs.
- The menu timeout now also works when pressing the "Back" button during replay
to enter the "Recordings" menu.
- Updated 'channels.conf' for the "Bundesliga" channels of Premiere World
(thanks to Helmut Schächner).
- Fixed reading timers.conf and channels.conf that contain blanks after numeric
values.
- Fixed handling trick modes near the beginning and end of a recording.
- Pressing the "Back" button while replaying a DVD now leads to the DVD menu.
|
|
- Made VDR compile with libdvdread-0.9.1 (thanks to Andreas Schultz).
Note that you now _need_ version 0.9.1 of libdvdread to compile VDR with
DVD support!
- Several fixes to the replay mode display (thanks to Stefan Huelswitt):
no more replay mode display when pressing the "Green" or "Yellow" button
(Skip +/-60s); fixed timeout when pressing '0' to set an editing mark while
the progress display is not shown; mode display is shown after progress
display is closed; pressing "Ok" while the mode display is on brings up
the progress display; no more unnecessary display of "normal play mode".
- Supplying the new frontend parameter 'Inversion' (currently it is always
set to INVERSION_AUTO, which should work with all channels on Astra).
- Removing unnecessary double quotes from EPG Subtitle in EPGBugfixLevel >=1.
- EPG info is now updated if the contents changes but the ID remains the same.
- Fixed handling SVDRP commands whith more than one blank between the command
word and the options.
- The current volume setting is now saved to setup.conf and restored at the
next program start.
- New command line option '-r' to define a command that gets called before and
after each recording (see INSTALL for details).
- Implemented a check to see whether the system time is running linearly.
- Writing the current time (as seen by VDR) into the log file when starting
a timer recording (this may help debugging cases where timers don't start
at the expected time).
- Made the volume, mute and power keys work when a menu is active, too (thanks
to Matthias Weingart).
|
|
- Fixed behaviour in case the shutdown didn't take place (there were many
"next timer event at..." messages in that case).
- Reduced the default value for MinEventTimeout to 30 minutes.
- Fixed detecting manual start in shutdown feature.
- An error message is now displayed in case the Transfer Mode can't be
started because the necessary DVB card is currently recording (or there
is no DVB card that can access this channel).
- Fixed toggling channels with the '0' key in case the "Ok" button has been
pressed to display the current/next information.
- Pressing the "Power" key now always initiates the shutdown sequence (after
user confirmation in case of a recording timer), event if there is currently
a menu or a replay session active. Note the additional remarks in INSTALL
regarding the values of the two parameters given to the shutdown program
in case of a currently recording timer.
- Switching through channel groups with the "Left" and "Right" keys now
always starts at the group that contains the current channel.
- Implemented "Multi Speed Mode" (thanks to Stefan Huelswitt).
- Implemented backtracing to hit the right spot after fast forward/rewind
(thanks to Stefan Huelswitt).
- Implemented replay mode display (thanks to Stefan Huelswitt, with a few
rewrites by kls).
- Changed the size of all input buffers used to parse config files or receive
SVDRP commands to the same value of 10KB. This allows long strings to be
used in the 'summary' field of a timer, for instance.
- The pipe to the Dolby Digital replay command (option '-a') now closes all
unused file descriptors in the child process to avoid crashing when the
OSD is used (thanks to Andreas Vitting).
- Switched to the driver's new tuning API (VDR now requires a driver version
dated 2001-09-14 or higher).
- Changed obsolete macro VIDEO_WINDOW_CHROMAKEY to VID_TYPE_CHROMAKEY (thanks
to Guido Fiala).
- New version of the "Master-Timer" tool (thanks to Matthias Schniedermeyer).
- Better error handling when writing configuration files.
- Fixed putting the final editing mark into the edited version's marks file.
- Fixed manipulating an editing mark at the very end of a recording.
- Fixed starting a new replay immediately after stopping a previous one (had
caused a mix between live video and replay).
- Three new keys ("Volume+", Volume-" and "Mute") to control the DVB card's
audio output volume.
- New version of the 'epg2timers' tool (thanks to Carsten Koch).
|
|
- Modified the display of the channel group separators (thanks to Markus Lang
for this suggestion).
- Added support for replaying DVDs (thanks to Andreas Schultz). See INSTALL for
instructions on how to compile VDR with DVD support.
- Fixed replay progress display in case replay is paused while watching an
ongoing recording.
- Ringbuffer uses semaphores to signal empty/full conditions.
- Fixed calculating the timeout value in cFile::FileReady() (thanks to
Wolfgang Henselmann-Weiss).
|
|
- Added Norwegian language texts (thanks to Jørgen Tvedt).
- Increased the usleep value in cDvbOsd::Cmd() to 5000 in order to work on
systems with the KURT/utime-patch (thanks to Guido Fiala).
- Changed the check whether the driver is loaded in runvdr to check for the
'dvb' module (the last one loaded).
- Fixed repeat function with LIRC (thanks to Stefan Huelswitt).
- Increased the upper limit for the symbol rate to 30000 (thanks to Ulrich
Röder).
- Made the position of the channel display configurable (thanks to Stefan
Huelswitt).
- Made the width and height of the OSD configurable (thanks to Stefan Huelswitt).
- DiSEqC support can now be generally enabled/disabled in the Setup menu. This
may be necessary if your multiswitch gets irritated by the default DiSEqC
codes '0' (thanks to Markus Lang).
- Fixed replaying in case there is no index file.
- Fixed jumping to an editing mark when replay has been paused.
- Avoiding unnecessary code execution in the replay progress display (thanks
to Guido Fiala).
- When entering time values the digits that still have to be entered are now
shown as '-' (as in "1-:--").
- When setting an editing mark while the progress display is not active, the
display will now be turned on for a short while to indicate the successful
setting of the mark.
- Updated 'channels.conf' for Premiere World (thanks to Helmut Schächner).
Check your timers if you use this channels.conf file, since the sequence of
several PW channels has been changed.
- Changed the color of "Info" messages to "black on green" and that of the
confirmation messages (like "Delete...") to "black on yellow".
- Fixed display with DEBUG_OSD (it still crashes sometimes, esp. when replaying,
but I can't seem to find what causes this... any ideas anybody?).
- Avoiding audio/video distortions in 'Transfer Mode' by no longer actually
tuning the primary interface (which can't receive this channel, anyway).
Apparently the driver gets irritated when the channel is switched and a
replay session is started immediately after that.
- Increased timeout until reporting "video data stream broken" when recording.
- Explicitly switching back to the previously active channel after ending a
replay session (to have it shown correctly in case it was in 'Transfer Mode').
|
|
- VDR now requires driver version 0.8.1 or higher.
- Recordings are now saved in PES mode. Note that you now need to install the
driver *WITHOUT* 'outstream=0'! This is the default when you 'make insmod' in
the DVB/driver directory.
Old recordings (in AV_PES mode) can still be replayed (as long as the driver
still supports replaying AV_PES files). The only limitation with this is that
in fast forward/back mode the picture may be slightly distorted and there may
be sound fragments.
- The EPG data is now dumped into the file /video/epg.data every ten minutes.
Use the Perl script 'epg2html.pl' to convert the raw EPG data into a simple
HTML programme listing.
- Fixed handling of channel switching with the "Blue" button in the "What's on
now/next?" menus.
- Fixed saving the MarginStop setup parameter.
- Fixed missing initialization in cConfig.
- Implemented "On Disk Editing".
- There is no more default 'timers.conf' file.
- Added Italian language texts (thanks to Alberto Carraro).
- Fixed starting a replay session when the program is currently in "transfer
mode".
- Fixed setting/modifying timers via SVDRP with empty summary fields.
- Fixed a problem with recordings that have a single quote character in their
name (this is now mapped to 0x01).
- Changed the value for Diseqc to '0' in the default 'channels.conf'.
- Fixed displaying channels and recording status in the RCU's LED display when
a recording is interrupted due to higher priority.
- Implemented safe writing of config files (first writes into a temporary file
and then renames it).
- In case the video data stream is broken the log message will come only every
5 seconds.
- The current channel is now saved in the 'setup.conf' file when VDR is cancelled,
and will be restored next time it is started (thanks to Deti Fliegl).
- The EIT scanning thread is now locked when switching channels to avoid problems.
- Encrypted channels can now be selected even without knowing the PNR (however, it
is still necessary for the EPG info).
|
|
- Date and time in the title of an event info page are now always right adjusted.
- The 'current channel' is now handled device specific (in case there is more
than one DVB card).
- The 'SetSystemTime' option in the "Setup" menu is now shown as "yes/no".
- Implemented "internationalization" (see 'i18n.c' for information on how to
add new languages). Thanks to Miha Setina for translating the OSD texts to
the Slovenian language.
- Fixed learning keys on the PC keyboard (display oscillated).
- Fixed a timing problem with OSD refresh and SVDRP.
- Avoiding multiple definitions of the same timer in the "Schedule" menu (this
could happen when pressing the "Red" button while editing the timer).
- There can now be a configuration file named 'commands.conf' that defines
commands that can be executed through the "Main" menu's "Commands" option
(see FORMATS for details on how to define these commands).
- Added a 'fixed' font for use with the output of system commands.
- The 'Priority' parameter of the timers is now also used to interrupt a low
priority timer recording if a higher priority timer wants to record.
- A timer recording on a DVB card with a CAM module will now be interrupted
by a timer that needs to use this specific DVB card to record an encrypted
channel, if the timer currently occupying this DVB card doesn't need the
CAM module (and thus can continue recording on a different DVB card).
- The "Yellow" button in the "What's on now/next?" menus now displays the
schedule of the current channel from that menu.
- All DVB cards in a multi-card system now write their EIT information into the
same data structure.
- If there is more than one DVB card in the system, the non-primary cards are
now used to periodically scan through the channels in order to keep the
EPG info up-to-date. Scanning kicks in after 60 seconds of user inactivity
(timeout in order to keep user interactions instantaneously) and each channel
that has the 'pnr' parameter defined in 'channels.conf' is switched to for
20 seconds. If there is only one DVB card in the system, that card will start
scanning after 5 hours (configurable through the "Setup" menu) of user inactivity
and will switch back to the channel it originally displayed at the first sign of
user activity. Any scanning will only occur if that particular card is not
currently recording or replaying.
- Now shifting the 'Subtitle' info into the 'ExtendedDescription' on stations
that don't send the EIT information correctly (like, e.g., 'VOX').
- Implemented a 10 seconds latency when removing files.
- Fixed unwanted reaction on the "Green" and "Yellow" button in the "Event" display.
- Implemented 'Transfer Mode' to display video data from the DVB card that actually
can receive a certain channel on the primary interface. This is currently in
an early state and may still cause some problems, but it appears to work nice
already.
|
|
- The EIT information is now gathered in a separate thread.
- The sytem time can now be synchronized to the time broadcast in the DVB data
stream. This can be enabled in the "Setup" menu by setting "SetSystemTime" to
1. Note that this works only if VDR is running under a user id that has
permisson to set the system time.
- The new item "Schedule" in the "Main" menu opens VDR's EPG (thanks to Robert
Schneider). See the MANUAL file for a detailed description.
- The new setup parameters MarginStart and MarginStop define how long (in
minutes) before the official start time of a broadcast VDR shall begin
recording, and how long after the official end time it shall stop recording.
These are used when a recording is programmed from the "Schedules" menu.
- The delay value in the dvb.c.071.diff patch to the driver has been increased
to '3', because on some systems the OSD was not displayed correctly. If you
are running an already patched version 0.71 driver and encounter problems
with the OSD, please make sure the parameter in the ddelay call is '3', not
'2'.
- Fixed initializing the RCU remote control code (didn't work after switching
on the system).
- Problematic characters in recording names (which can come from timers that
are programmed via the "Schedules" menu) are now replaced by suitable
substitutes.
|
|
- Remote control data is now received in a separate thread, which makes things
a lot smoother.
- Repeat and release of remote control keys is now explicitly distinguished.
- In replay mode the search forward/back and skip functions now have two modes:
Pressing the key shortly and releasing it starts the function, and pressing it
again stops it. Pressing and holding down the key starts the function and
releasing the key stops it.
- The '@' character that marks an "instant recording" can now be turned off
in the "Setup" menu (thanks to Matthias Schniedermeyer).
- Pressing the "Back" button while replaying now stops replaying and brings up
the "Recordings" menu (suggested by Carsten Koch). This can be used to easily
delete a recording after watching it, or to switch to a different recording.
- The "Recordings" menu now places the cursor on the last replayed recording, if
that file still exists.
- The "Blue" button in the "Main" menu can now be used to "Resume" a previously
stopped replay session (suggested by Martin Hammerschmid).
- The low and high LNB frequencies can now be changed in the "Setup" menu.
|
