| Age | Commit message (Collapse) | Author |
|---|
|
- Removed the '#define FE_CAN_2ND_GEN_MODULATION', since it was wrong and the
flag is now in the driver, anyway.
- The full-featured DVB cards are now given the TS data directly for replay
(thanks to Oliver Endriss for enhancing the av7110 driver to make it replay
TS data). The patch from ftp://ftp.cadsoft.de/vdr/Developer/av7110_ts_replay__1.diff
implements this change in the driver.
The patch av7110_v4ldvb_api5_audiobuf_test_1.diff mentioned in version 1.7.2
is still necessary to avoid audio and video glitches on some channels.
- Added a typecast in cUnbufferedFile::Write() to avoid an error message when
compiling on 64 bit systems.
- Added some missing 'const' statements to cBitmap (thanks to Andreas Regel).
- Fixed returning complete PES packets in cTsToPes::GetPes() (thanks to Reinhard
Nissl).
- Added a missing Detach() in cTransfer::Activate() (thanks to Marco Schlüßler).
- Added clearing the TS buffers in cDevice::Detach() (thanks to Marco Schlüßler).
- Fixed incrementing the continuity counter in cPatPmtGenerator::GetPmt() (thanks
to Johann Friedrichs).
- Fixed removing deleted recordings in case there is a problem. Once a recording
caused a problem with removing, no others were removed any more and an ongoing
recording could fill up the disk and cause other recordings to be deleted
automatically (reported by Reinhard Nissl).
- Added "DEFINES += -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE"
to Make.config.template (thanks to Johann Friedrichs for pointing this out).
Plugin authors should add this line to their Makefile or Make.config if they use
file access functions that need special versions for 64 bit offsets.
- The new command line option -i can be used to set an "instance id", which will
be used to distinguish recordings of the same broadcast made by different instances
of VDR (suggested by Frank Schmirler). This replaces the use of the "resume id"
that was introduced in version 1.7.3.
- Added checking mutexCurrentAudioTrack to cDevice::PlayTs() (thanks to Reinhard
Nissl for pointing this out).
- Fixed handling the pointer field in cPatPmtParser::ParsePmt() (thanks to Frank
Schmirler - sorry I swapped two lines when adopting the original patch).
- Checking the remaining packet length after processing the pointer field in
cPatPmtParser::ParsePat() and cPatPmtParser::ParsePmt() (suggested by Frank
Schmirler).
- Checking the pointer field in cPatPmtParser::ParsePmt() only in 'payload start'
packets (suggested by Frank Schmirler).
- Changed cPatPmtGenerator to make sure the PMT pid doesn't collide with any of
the actual pids of the channel.
- Fixed cDevice::PlayTsAudio() and made cDevice::PlayTsVideo() return 0 if
PlayVideo() didn't play anything.
- Added an 'int' typecast to calculations involving FramesPerSecond() to avoid
compiler warnings (reported by Winfried Koehler).
- Fixed detecting frames for pure audio recordings.
- Fixed editing PES recordings. The frame type in the index.vdr file generated for
the edited PES recording is set to 1 for I-frames and 2 for all others (P- and
B-frames). The exact frame type doesn't matter for VDR, it only needs to know if
it's an I-frame or not.
- The PAT/PMT is now only processed if its version changes (reported by Reinhard
Nissl).
- Fixed handling the maximum video file size (reported by Udo Richter).
- Improved fast-forward/-rewind for audio recordings. The actual data is now sent
to the output device, so that it can be replayed and thus cause the proper delay.
For pure audio recordings the audio is no longer muted in fast-forward/-rewind
mode, so that some orientation regarding the position within the recording is
possible. There may still be some offset in the replay position displayed by the
progress indicator when switching from fast-forward/-rewind to play mode, as well
as in the current position during normal play mode. This is due to the various
buffers between the player and the output device and will be addressed later.
Note the new function cDevice::IsPlayingVideo(), which is used to inform the
player whether there is video data in the currently replayed stream. If a derived
cDevice class reimplements PlayTs() or PlayPes(), it also needs to make sure this
new function works as expected.
|
|
- Re-implemented handling of DVB-S2, which first appeared in version 1.5.14, but was
revoked in version 1.5.15 in favor of making a stable version 1.6.0. VDR now
requires the "multiproto" DVB driver, e.g. from http://jusst.de/hg/multiproto.
Note that the channels.conf file now supports additional parameters, so you may
want to make sure you have a backup of this file in case you need to go back to
the previous version of VDR!
- Fixed displaying transponder data when it is modified (thanks to Reinhard Nissl).
- Fixed handling the counter in detection of pre 1.3.19 PS data (thanks to Reinhard
Nissl).
- Improved logging system time changes to avoid problems on slow systems under
heavy load (suggested by Helmut Auer).
- Now setting the thread name, so that it can be seen in 'top -H' (thanks to Rolf
Ahrenberg).
- Fixed initializing the timer's flags in the cTimer copy constructor (thanks to
Andreas Mair).
- Fixed setting the OSD level in the 'osddemo' example (thanks to Wolfgang Rohdewald).
- Increased the time between checking the CAM status to 500ms to avoid problems
with some CAMs (reported by Arthur Konovalov).
|
|
- Added a missing reset of maxNumber in cChannels::Renumber() (reported by Sundararaj
Reel).
- Revoked the fixed change of the default character set for SI data and introduced
an environment variable to control it (thanks to Ales Jurik for reporting broken
SI data on the Czech/Slovak channels, which actually do follow the standard).
Users who want to set the default character set to something different can do this
by setting the environment variable VDR_CHARSET_OVERRIDE to something like
ISO-8859-9.
- Fixed a signed character used as index in cBase64Encoder::NextLine() (thanks
to Tobias Grimm).
- Updated the Spanish and Catalanian OSD texts (thanks to Luca Olivetti).
- Fixed automatically selecting the preferred subtitle language (based on a patch
from Rolf Ahrenberg).
- Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Updated the Polish OSD texts (thanks to Michael Rakowski).
- Fixed formatting the name section in the VDR man pages (thanks to Tobias Grimm).
- Updated the Swedish OSD texts (thanks to Magnus Andersson).
- Added Russian translations to the 'skincurses' and 'pictures' plugins (thanks
to Alexander Gross).
- Fixed displaying the free disk space when entering the recordings menu where the
last replayed recording was in a subdirectory, and pressing Back (thanks to Rolf
Ahrenberg).
- Fixed tuning to a live channel after a recording has been stopped using the
'Back' key.
- Resetting a timer's 'pending' flag when it has ended.
|
|
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Added option -i to the pictures plugin's pic2mpg to ignore unknown file types.
- Revoked the switch to the "multiproto" driver in order to make a new stable
version before making this big switch and forcing all users to install a
driver that is not yet in the kernel source. The removed code will reappear
in version 1.7.0.
Note that you may need to switch back to an older version of your channels.conf
file if you have already used version 1.5.14, because it introduced new parameters.
- Added the new command line option --userdump to enable core dumps in case VDR
is run as root with option -u (thanks to Hans-Werner Hilse).
- Speeded up anti-aliased font rendering by caching the blend indexes (based on
a suggestion by Martin Wache).
- Fixed setting the OSD area in the pictures plugin.
- Ignoring "repeat" and "release" keys in the time search entry mode during replay,
to avoid inadvertently leaving it in case a key is pressed too long (suggested
by Andreas Brugger).
- Improved sending all frames to devices that can handle them in fast forward
trick speeds, including subtitles (thanks to Timo Eskola).
- The section handler is now stopped before the device is destroyed, to avoid
accessing file handles after they have become invalid (thanks to Reinhard
Nissl for reporting an invalid access when ending VDR, and to Deti Fliegl for
a patch that was used to implement StopSectionHandler()).
- Fixed setting the date in the channel display of the classic and sttng skins,
to avoid unnecessary OSD access (thanks to Marco Schlüßler).
- The free disk space is now also displayed in the title of the "Recordings"
menu (suggested by Walter Koch).
- Changed the message "Upcoming VPS recording!" to "Upcoming recording!" because
it applies to non-VPS recordings as well.
- Fixed a loss of a timer's 'recording' flag after modifying it via MODT.
- Fixed detecting directories in cFileNameList::Load().
- Running the thread that removes deleted recordings at a low priority to (maybe)
avoid stuttering replay in case the thread is run during replay.
- Limiting the length of the recording name in timers in case VDR is run with
--vfat, in order to avoid names that are too long for Windows (suggested by Rolf
Ahrenberg).
- Using cString::sprintf() instead of asprintf() (thanks to Wolfgang Rohdewald
for pointing out a possible problem if the return value is not checked).
Plugin authors may want to consider doing the same. For convenience there is now
an additional version of cString::sprintf() that accepts a va_list parameter.
- When deleting the recording that is currently replayed, the replay is now
stopped immediately (thanks to Mikko Matilainen for reporting a possible crash
if the Info key is pressed after deleting the currently replayed recording).
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
- When determining the amount of free disk space, any deleted (but not yet removed)
recordings on different file systems (that are mounted under the video directory)
are no longer taken into account.
- When running out of disk space during a recording, only such deleted or old
recordings are removed, that actually are on the video directory file system(s).
This prevents VDR from accidentally deleting recordings on other file systems,
which would not add any free space to the video directory.
- Implemented the cStatus, cDevice and cPlayer functions for setting subtitle tracks
in plugins (thanks to Petri Hintukainen).
- Added cStatus::TimerChange() to inform plugins about changes to the list of timers
(based on a patch from Benedikt Elser).
- Added new cStatus functions to the 'status' plugin.
- Added missing #include <limits.h> to epg.c and menuitems.h (thanks to Ville Skyttä).
- The new function cSkin::SetScrollbar() can be implemented by skins to display
a scrollbar in every list menu. The 'classic' and 'sttng' skins have been
changed accordingly, as well as the 'skincurses' plugin.
- Introduced 'operator const void * ()' in cString to catch cases where operator*()
should be used.
- Fixed calculating the scrollbar sizes in the skins.
|
|
- Added cDevice::HasCi() so that devices with Common Interface can be avoided
when tuning to an FTA channel, thus preserving the CAM resources even on budget
DVB cards (suggested by Petri Helin).
- Fixed i18n characters for the Hungarian texts (thanks to Thomas Günther).
- Now using cPipe instead of popen() in cCommand::Execute() to avoid problems
with open file handles when starting background commands (thanks to Reinhard
Nissl).
- Removed 'assert(0)' from cDvbSpuDecoder::setTime() (thanks to Marco Schlüßler).
- Fixed a possible crash when loading an invalid XPM file (thanks to Martin Wache).
- Updated satellite names in 'sources.conf' (thanks to Thilo Wunderlich).
- Adapted 'libsi' to DVB-S2 (thanks to Marco Schlüßler).
- Fixed handling error status in cDvbTuner::GetFrontendStatus() (thanks to
Reinhard Nissl).
- Shutdown handling has been rewritten (thanks to Udo Richter).
- Plugins can now implement the new function WakeupTime() to request VDR to wake
up at a particular time (thanks to Udo Richter).
- The HUP signal now forces a restart of VDR (thanks to Udo Richter).
- cThread::EmergencyExit() has been replaced by ShutdownHandler.RequestEmergencyExit().
- Several references to "button" in a remote control context have been changed
to "key" (based on a report from Marko Mäkelä regarding the "Menu button closes"
text). The "MenuButtonCloses" parameter in 'setup.conf' has therefore been
renamed to "MenuKeyCloses", accordingly. This will result in an "unknown config
parameter: MenuButtonCloses" error message in the log file, so you may want to
remove that entry from your 'setup.conf' file.
- Simplified the error handling in cDvbTuner::GetFrontendStatus() (based on a
discussion with Reinhard Nissl).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Increased the maximum number of DVB devices to 8 (thanks to Rolf Ahrenberg).
- The new Setup parameter "Channel entry timeout" can be used to customize the time
since the last keypress until a numerically entered channel number is considered
complete, and the channel is switched (suggested by Helmut Auer). Setting this
parameter to 0 turns off the automatic channel switching, and the user will
have to confirm the entry by pressing the "Ok" key.
|
|
- Official release.
|
|
- Some improvements to the man pages (thanks to Ville Skyttä).
- Fixed a possible segfault in cSkins::Message() (thanks to Udo Richter).
- Made the getskyepg.pl script of the 'sky' plugin send a user agent message to
the server, according to the rules at http://bleb.org/tv/data/listings.
If your version of 'wget' doesn't support the -U option to set the user agent,
use the new option -U of getskyepg.pl to have the information added to the URL
as a query string.
- The getskyepg.pl script now replaces "&" with "&".
- Fixed a possible crash in remux.c on 64-bit machines (thanks to Reinhard Nissl).
- Fixed a typo in the change to the "Use small font" setup option in version 1.3.47
in the HISTORY and CONTRIBUTORS file (reported by Andreas Brugger).
- Added a missing 'const' to cRecordingInfo::ChannelID() (reported by Andreas
Brugger). This required the APIVERSION to be increased, so plugins will have to
be recompiled.
- Now calling cPluginManager::Active() only if VDR is really trying to shut down,
and waiting for 5 minutes before calling it again (thanks to Jörg Wendel for
reporting that cPlugin::Active() was called too often, and to Udo Richter for
some hints on how to improve this).
- Replaced 'unsigned long' with 'uint32_t' and 'uint64' with 'uint64_t' to
avoid problems on 64-bit machines.
|
|
- Fixed the Makefile of the 'servicedemo' plugin, so that it defines the
PLUGIN macro, which allows the Make.config file to react properly when
compiling the plugin (reported by Bernd Melcher).
Note to all plugin developers: a plugin's Makefile *must* define the PLUGIN
macro, even if it doesn't use it itself!
- Added a comment regarding the PLUGIN macro to the 'newplugin' script.
- Added '--vfat' to the vdr.1 man page (reported by Udo Richter).
- Removed a double fdopen() in cPipe::Open() (reported by Stefan Huelswitt).
- Fixed handling the running status of EPG events before the currently running one,
in case they are added after the current event.
- cEIT::cEIT() now calls pSchedule->SetPresentSeen() even if OnlyRunningStatus is
true.
- Newlines in title and short text of an EPG event are now changed into blanks only
after all other fixes, because a short text might become a description.
- Fixed handling network masks in the svdrphosts.conf file (thanks to Patrick
Maier).
- Fixed handling relative volume settings in the call to cStatus::MsgSetVolume()
(reported by Norbert Wentz).
- Added a missing initialization of 'mutex' in cCiMenu::cCiMenu() and removed
some superfluous semicolons in ci.c (thanks to Marco Schlüßler).
- Fixed handling client side termination of SVDRP connections (thanks to Frank
Schmirler).
- cDevice::GetDevice() now prefers any device that's already receiving and doesn't
require detatching receivers (suggested by Anssi Hannula).
- Fixed handling numeric keys in the channel display after switching channel groups
(thanks to Andreas Regel).
- Menu items derived from cMenuEditIntItem now loop though their values if they
have a dedicated minimum or maximum limit (suggested by Andy Grobb). Looping is
only done for normal keypresses, not for repeated ones. This allows the user to
scroll the value all the way to the limit by keeping the key pressed.
|
|
- Fixed handling the "Power" key in case a recording is going on and no plugin
is active (thanks to Udo Richter; bug reported by Dominique Simon).
- Updated the Polish OSD texts (thanks to Jaroslaw Swierczynski).
- Fixed a memory leak in handling external EPG data (thanks to Tobias Grimm).
- Fixed a memory leak in closing the video file during replay (thanks to Tobias Grimm).
- Updated the Italian OSD texts (thanks to Nino Gerbino and Antonio Ospite).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
|
|
- Fixed initializing 'noapiv' in the Makefile (reported by Ronny Kornexl).
- Fixed extracting APIVERSION to work with older versions of 'sed' (reported by
Oliver Endriss; thanks also to Udo Richter for a shorter version of the 'sed'
expression).
- Fixed broken APIVERSION extraction line in 'newplugin' (thanks to Oliver Endriss).
- Fixed entering '0' in a cMenuEditIntItem (reported by Mirko Dölle).
- Updated the Italian OSD texts (thanks to Nino Gerbino).
- Added a note about adding 'INCLUDES += -I$(DVBDIR)/include' to an existing
Make.config (problem reported by Markus Ehrnsperger).
- Fixed handling the cPluginManager::Active() result when pressing the "Power" key
(reported by Werner Färber).
- Added a hint about commenting out the line '#define USE_FADVISE' in tools.c in
case of problems with replaying in fast forward mode if the video directory is
mounted via a Samba share (reported by Andy Grobb).
- Changed the "Really restart?" prompt in the call to cPluginManager::Active() in
menu.c to "restart anyway?" (suggested by Rolf Ahrenberg).
- Removed the obsolete "'1' for encrypted radio channels" part from the description
of the VPID in vdr.5 (reported by Alexander Hans).
- Fixed tuning to the channel of a VPS timer if the device is the actual device.
|
|
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed a crash when setting the time transponder in the Setup menu, caused by the
new 'noneString' in cMenuEditChanItem (reported by Thomas Günther).
- Added NULL checks to some strdup() calls in menuitems.c (suggested by Darren
Salt).
- Removed the unnecessary 'value' member from cMenuEditItem.
- Fixed the initial setting of the time transponder setup parameter (reported
by Thomas Günther).
- Fixed unnecessary Set() calls in cMenuEditIntItem::ProcessKey().
- Allowing a tolerance for symbol rate values that are off by one (thanks to
Richard Lithvall).
- Added VBITeletextDescriptorTag, TeletextDescriptorTag, LocalTimeOffsetDescriptorTag
and PremiereContentTransmissionDescriptor to 'libsi' (thanks to Marco Schlüßler).
- Using geteuid() to check whether VDR is running as user 'root' (suggested by
Tobias Grimm).
- Added a missing "Key$" in skincurses.c (reported by Darren Salt).
- Reintroduced the log message "deleting plugin: ..." when shutting down VDR (upon
request by Ville Skyttä, as in the initial patch from Christoph Haubrich).
- Fixed the vdr.1 man page (a single DVB card can record and do live tv).
- The preferred audio language is now automatically selected when starting replay.
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- The new function cPlugin::Active() can be used by a plugin to indicate that it
is still busy and the system should not shut down or restart (based on a patch
from Sascha Volkenandt). See PLUGINS.html for details.
- Fixed setting the 'Delta' parameter when calling the shutdown script with
no active timer (reported by Helge Lenz).
- In order to make sure that plugins are compiled with the same DVB driver header
files as VDR itself, the definition of DVBDIR has been removed from the VDR
Makefile. If you are using a driver version that has its header files at a location
other than /usr/include/linux/dvb, you can define DVBDIR in the Make.config
file (see also INSTALL). Note that if you already have a Make.config file of your
own, you should add the lines
ifdef DVBDIR
INCLUDES += -I$(DVBDIR)/include
endif
to its end, as in the new Make.config.template.
Any reference to DVBDIR should be removed from all plugins' Makefiles, like this:
------------------------------------------------------------
--- PLUGINS/src/hello/Makefile 2005/11/11 13:20:14 1.10
+++ PLUGINS/src/hello/Makefile 2006/04/15 11:58:46 1.11
@@ -20,7 +20,6 @@
### The directory environment:
-DVBDIR = ../../../../DVB
VDRDIR = ../../..
LIBDIR = ../../lib
TMPDIR = /tmp
@@ -40,7 +39,7 @@
### Includes and Defines (add further entries here):
-INCLUDES += -I$(VDRDIR)/include -I$(DVBDIR)/include
+INCLUDES += -I$(VDRDIR)/include
DEFINES += -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
------------------------------------------------------------
Thanks to Marco Schlüßler for pointing out this problem.
- Implemented kNext and kPrev keys (based on a patch from Peter Juszack).
See MANUAL for details.
- Implemented kChanPrev (from a patch from Darren Salt).
- The "Update channels" parameter in the "Setup/DVB" menu has been extended to
allow updating only the PIDs (see MANUAL for details). When updating to this
version of VDR, please verify that the setting is as you want it to be, because
the values have been shifted.
- The new APIVERSION (see config.h) now allows existing compiled plugins to be
used with newer versions of VDR, as long as there have been no changes to the
VDR header files since the last APIVERSION. Existing plugins' Makefiles should
have all references to VDRVERSION changed to APIVERSION, like this:
------------------------------------------------------------
--- PLUGINS/src/hello/Makefile 2006/04/15 11:58:46 1.11
+++ PLUGINS/src/hello/Makefile 2006/04/16 09:03:50 1.12
@@ -28,9 +28,9 @@
-include $(VDRDIR)/Make.config
-### The version number of VDR (taken from VDR's "config.h"):
+### The version number of VDR's plugin API (taken from VDR's "config.h"):
-VDRVERSION = $(shell grep 'define VDRVERSION ' $(VDRDIR)/config.h | awk '{ print $$3 }' | sed -e 's/"//g')
+APIVERSION = $(shell sed -ne '/define APIVERSION/s/^.*"\(.*\)".*$$/\1/p' $(VDRDIR)/config.h)
### The name of the distribution archive:
@@ -67,7 +67,7 @@
libvdr-$(PLUGIN).so: $(OBJS)
$(CXX) $(CXXFLAGS) -shared $(OBJS) -o $@
- @cp $@ $(LIBDIR)/$@.$(VDRVERSION)
+ @cp $@ $(LIBDIR)/$@.$(APIVERSION)
dist: clean
@-rm -rf $(TMPDIR)/$(ARCHIVE)
------------------------------------------------------------
- If a timer is newly created from within the "Schedule" menu, and its event is
already running or has its start time within the next two minutes, it now goes
directly into the "Edit timer" menu in order to allow the user to make further
changes to timer parameters before the actual recording starts (inspired by
Christian Wieninger's "epgsearch" plugin).
- Added format check to syslog_with_tid().
- Updated the INSTALL file's section about non-VDR files in the video directory
(since version 1.3.38 disk access is done in a separate thread, so the watchdog
timer won't hit).
- Changed the behaviour of the "Use small font" setup option to *always* use the small
font if set to '2' - even if it would have been a fixed font (suggested by Ronny
Kornexl).
- No longer using characters 0x01 and 0x02 for mapping single quote and slash in
recording names (thanks to Patrick Fischer for reporting that this was a problem
with XML). The single quote is not mapped at all, and the slash is interchanged
with the tilde. Existing recordings will be handled like before, so there is
no need to actually rename them.
- The cRemote::CallPlugin() function now has a boolean return value that tells
the caller whether initiating the plugin call was successful (suggested by
Reinhard Nissl). If it returns false, another plugin call is currently pending
and the caller should try again later. This also means that the SVDRP command
PLUG can now return an error code is the call fails.
- The new function cPlugin::MainThreadHook() can be used by plugins to perform
actions in the context of the main program thread. Use this function with great
care and only of you absolutely have to! See also PLUGINS.html.
|
|
- The SVDRP command LSTT now accepts the new option 'id' to have the channels
of the timers listed with their unique channel ids instead of their numbers
(suggested by Matthias Schniedermeyer).
- Added a missing #include <linux/unistd.h> to thread.c (thanks to Ville Skyttä).
- Fixed the "plugins-clean" and "plugins-install" targets in the Makefile (thanks
to Andreas Brachold).
- Fixed handling "more than 3 byte" key sequences in cKbdRemote::ReadKeySequence()
(thanks to Peter Bieringer). If you are using the PC keyboard as remote control
input you may need to make VDR newly learn the keys by removing the remote.conf
file.
- To avoid problems with access rights when VDR shall run as 'root' it now skips
all SetCaps() and SetUser() calls when it is started as 'root' and "-u root"
is given.
- Added missing i18n entry for the "Timer" button (thanks to Ville Skyttä)
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Making the "Menu" key behave consistently has not been well received by several
users, so the new option "Setup/OSD/Menu button closes" can be used to get the
old behavior back (which also is the default value of this option).
- Dropped the default vdr user. The program now always runs under the user id
it was started from, unless the '-u' option is given and it was started from
the 'root' user. If you want to have a default vdr user, you can activate and
adjust the "VDR_USER = vdr" line in your Make.config file (from the original
patch by Ludwig Nussel).
- Key macros can now be defined for all non-modeless keys (suggested by Mirko Dölle).
- Adjusted the "KEY MACROS" section of vdr.5 to the new plugin calling mechanism
introduced in version 1.3.32.
- Removed the now obsolete "ca.conf" section from vdr.1 (thanks to Ville Skyttä).
- Added missing description of L and R circular polarization to 'diseqc.conf'.
- Added a note about "modprobe capability" to INSTALL (suggested by Patrick Cernko).
- Fixed canonicalizing the file name in the SVDRP command GRAB to allow full path
names (thanks to Stefan Huelswitt).
- Added a missing '-' to the example for viewing a grabbed image on a remote host
(reported by Philippe Gramoullé).
- Made the "What's on now/next?" menus a lot faster by storing a pointer to each
channel's schedule in the cChannel data.
- Made the log messages regarding lost lock of devices "info" instead of "error"
(suggested by Andreas Brachold).
- The SVDRP command GRAB allows file names without extension again (suggested by
Stefan Huelswitt).
- Pressing '0' in the "Schedule" menu now rotates through displaying "This event on
this channel", "This event on all channels" and "All events on all channels".
This can be used to find reruns of a given show, or the episodes of a series.
Note that if there are many channels in your channels.conf, displaying the
"All events on all channels" page may take a while.
- The status markers in the "Schedule" menu are now only updated if a submenu is
closed in which a timer has been modified, which speeds up closing submenus.
- Now only writing Dolby Digital tracks into the 'info.vdr' file of a recording
if Setup.UseDolbyDigital is true (suggested by André Weidemann).
- Added a leading '0' to the day in the DayDateTime() function (thanks to Rolf
Ahrenberg).
- No longer displaying color buttons in the recording info menu if it has been
invoked from a player (reported by Jürgen Schilling).
|
|
- Fixed handling second audio and Dolby Digital PIDs for encrypted channels
(was broken in version 1.3.37).
- Improved TS/PES conversion to better handle lost TS packets (thanks to
Reinhard Nissl).
- Limited the frequency of log messages from the cRepackers.
- Now using the gettid() syscall to get a thread's pid, so that we get a
useful value on NPTL systems (suggested by Johannes Stezenbach).
- Fixed the RCU remote control handling to avoid problems with NPTL (thanks
to Andreas Share for reporting a lockup with the RCU on NPTL systems).
- When displaying the amount of free disk space, the space consumed by
recordings that have been "deleted" but not yet actually "removed" is now
taken into account (suggested by Christian Vogt).
- Now avoiding unnecessary disk access when checking if there are deleted
recordings that need to be removed (reported by Carsten Koch).
- Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now
a deleted recording is retained at least DELETEDLIFETIME seconds before
actually removing it.
The value of DELETEDLIFETIME has been changed to 300. So after (possibly
inadvertently) deleting a recording, there will be at least 5 minutes
in which it can be recovered (unless a new recording immediately requires
the disk space). The count starts again at 0 every time VDR is started.
- Fixed a possible crash when displaying the "Low disk space!" message from
a background thread (thanks to Christof Steininger).
- Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler).
- Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground
and background threads won't interfere.
- The main menu now dynamically updates its contents in case an instant
recording or replay stops, etc.
- The version number of EPG events is now also stored in the epg.data file
(thanks to Kendy Kutzner).
- EPG events that are no longer in the currently broadcasted data stream are
now automatically deleted.
- Removed an invalid access to Event->schedule in cSchedule::DelEvent().
- Modified cSchedule::Cleanup() (events are always sorted by time).
- Schedules are now cleaned up once every hour (not only at 05:00).
- The "Schedule" and "What's on now/next?" menus are now updated if a timer
is set or modified.
- cTimer no longer has its own 'schedule' member, it rather uses that of the
event it has been set to.
- The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus
now immediately creates a timer for the selected event and marks it with 'T'.
If the event is already marked with 'T', the "Red" button opens the "Edit
timer" menu for that timer.
- Removing deleted recordings is now done in a separate thread.
- Dropped the unused "stop recording on primary interface" stuff.
- Converting a grabbed image to JPEG is now done with the new function
RgbToJpeg() (see tools.h).
- The SVDRP command GRAB now determines the image type (JPEG or PNM) from the
extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit
'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but
has no meaning any more.
- The function cDevice::GrabImage() no longer writes the grabbed image to a
file, but rather returns a pointer to the image in memory. The wrapper
function cDevice::GrabImageFile() can be used to write the grabbed image
directly to a file. Plugins that used the old version of cDevice::GrabImage()
need to be adapted to the new interface.
- The new class cBase64Encoder (see tools.h) can be used to encode data in
base64 (thanks to Bob Withers for publishing his Base64 class).
- The SVDRP command GRAB now writes the image data to the SVDRP connection
(encoded in base64) if the given file name consists of only the file
extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file
name (based on a suggestion from Darren Salt).
A simple way of viewing a grabbed image on a remote host is:
svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display -
- The new command line option '-g' must be given if the SVDRP command GRAB
shall be allowed to write image files to disk. The parameter to this option
must be the full path name of an existing directory, without any "..", double
'/' or symlinks. By default, or if "-g- is given, grabbing to files is
not allowed any more because of potential security risks.
- Modified the way the SVDRP command GRAB writes the grabbed image to a file
to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino
Peña):
+ The file handle is now opened in a way that it won't follow symbolic links
(suggested by Darren Salt).
+ The given file name is now canonicalized, so that it won't contain any
".." or symlinks (suggested by Darren Salt).
+ Grabbing to files is limited to the directory given in the the command
line option '-g'. By default grabbing to files is not allowed any more.
- Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos).
- Changed all "illegal" to "invalid" in error messages (there's nothing "illegal"
in VDR ;-).
- When started as user 'root' VDR now switches to a lesser privileged user id,
keeping the capability to set the system time (based on a patch from Ludwig
Nussel). By default the user id 'vdr' is used, which can be changed through
the new command line option '-u'. Note that for security reasons VDR will no
longer run as user 'root' (unless you explicitly start it with '-u root',
but this is not recommended!). The 'runvdr' script has been changed to
use the '-u' option.
- Changed the API of the functions cStatus::Recording() and cStatus::Replaying(),
so that they can provide the full file name of the recording. Plugins that use
these (or the related cStatus::Msg...() functions) need to be adapted
(suggested by Andreas Brugger).
- The DVB devices now retune (and, if applicable, resend the DiSEqC data) if
the lock is lost (based on a patch from Reinhard Nissl).
- Fixed handling multi byte key sequences in cKbdRemote (based on a patch from
Jürgen Schneider).
- Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco
Schlüßler).
- Made the static cControl functions thread safe (thanks to Patrick Fischer).
- Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid
warnings with g++ 4.1.0 (thanks to Ville Skyttä).
- Fixed incrementing the 'state' variables in the repacker classes in remux.c
to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä).
- The Makefile now reports a summary of failed plugins (thanks to Udo Richter).
- The cTimer constructor can now take an optional cChannel (suggested by
Patrick Fischer).
- Fixed setting the main thread id if VDR is running as a daemon.
- Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl).
- Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner).
- Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger).
- Now using FE_READ_STATUS to read the current frontend status (suggested by
Holger Wächtler).
- The "Menu" key now behaves consistently. If there is anything on the OSD, it
is closed when the "Menu" key is pressed, and if there is nothing on the OSD,
the "Menu" key opens the main menu (suggested by Luca Olivetti).
- The new option "Setup/OSD/Timeout requested channel info" can be used to turn
off the automatic timeout of the channel display in case it was invoked by
a press of the "Ok" key (suggested by Thiemo Gehrke).
- A message is now given when an instant recording is started (suggested by
Helmut Auer). Actually the code was already there, just commented out - don't
remember why it wasn't active...
- Removed an obsolete "Summary" text from i18n.c and preceded all key definition
texts with "Key$" to avoid duplicates (reported by Lucian Muresan).
- Preceded all button texts with "Button$".
- Removed obsolete "Eject", "Language" and "scanning recordings..." texts.
- Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill).
- Disabled the use of "fadvise" in cUnbufferedFile because there have been
several reports that it causes more problems than it solves (suggested by
Petri Hintukainen). If you want to use "fadvise", you can activate the line
//#define USE_FADVISE
in tools.c.
- Removed unused 'offset' member from cOsdItem.
- In the "Channels" menu the numeric keys now position the cursor to the channel
with the given number (see MANUAL, section "Remote Control Keys", note (3) for
details).
- The "Mark/Move" function in the "Channels" menu now also works in the non-numeric
sort modes.
- The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if
this is a menu.
- The new "Info" key brings up information on the currently viewed programme
or recording. For a live programme this is the same as "Schedule/Ok", i.e. the
description of the current EPG event. For a recording this is the same as shown
by the "Info" button in the "Recordings" menu. Plugins that implement players
can overwrite their cControl::GetInfo() function to show their own info (see
PLUGINS.html for details). Pressing the "Info" key again while the info is
displayed will close the OSD. In order to assign this new key to an existing
remote control setup, the remote.conf file needs to be deleted and VDR has
to be restarted to go through the process of learning the remote control keys.
- Any cReceivers still attached to a cDevice when that device switches to a
different transponder are now automatically detached (suggested by Patrick
Fischer).
- The "flags" of a timer are now handled as an unsigned integer value. In order
to do this, the interface of cMenuEditBitItem also had to be changed.
- In string entry fields (like, e.g., the file name of a recording) the characters
can now be entered by pressing the numeric keys, the same way as on a
telephone keypad (based on the "Easy Input" patch from Marcel Schaeben).
- Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch
from "single shot" to "weekly", followed by the "Right" key (reported by
Andreas Böttger).
- The file 'ca.conf' is obsolete and has been removed.
- Revised all descriptions regarding CICAM.
- Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling.
- Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack()
(thanks to Reinhard Nissl).
- Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo
Schneider).
- Cleaned up some trailing white space.
|
|
- Updated 'sources.conf' (thanks to Philip Prindeville).
- Now using daemon() instead of fork() to run VDR in daemon mode (thanks to
Enrico Scholz).
- Fixed a possible endless loop in a menu with no selectable items if
Setup.MenuScrollWrap is true (thanks to Enrico Scholz).
- Making sure no item is displayed as "current" if Up, Down, Left or Right is
pressed in a menu with no selectable items.
- Added '__attribute__' to functions that use printf() like parameters (thanks
to Darren Salt).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed a leftover 'summary.vdr' in vdr.1 (reported by Christoph Hermanns).
- Added more error messages and line numbers when reading EPG data and info.vdr
(thanks to Peter Bieringer).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Added missing mutex locks to cCiMenu::Abort() and cCiEnquiry::Abort() (reported
by Marco Schlüßler).
- Fixed lock handling in CAM communication to avoid problems with multiple CAMs
per device or CAMs with more than one smart card.
- Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos).
- Updated the French OSD texts (thanks to Nicolas Huillard).
- Fixed the cFilter example in PLUGINS.html (reported by Patrick Fischer).
- The new class cUnbufferedFile is used for the recording files to avoid
trashing the file system cache (based on a patch by Ralf Müller).
|
|
- Added a sleep in cDvbPlayer::Action() in case there is no data to send to the
device, which avoids a busy loop on very fast machines (thanks to Martin Wache).
- Modified the description of cDevice::Poll() to avoid misunderstandings.
- Updated Croatian language texts (thanks to Drazen Dupor).
- cDvbPlayer::Goto() now appends a Sequence End Code to get the image shown
immediately with softdevices (thanks to Reinhard Nissl).
- Reactivated cVideoRepacker in remux.c after some fixes (thanks to Reinhard Nissl).
- Removed the fix for handling VPS timers, so that they only record if the event
they are assigned to actually has the given VPS time. This has caused repeating
VPS timers to stop recording prematurely.
- Avoiding duplicate components in EPG events when reading epg.data or in the
PUTE SVDRP command (thanks to Olaf Titz for reporting this one).
- Added the command line options '--lirc', '--rcu' and '--no-kbd' to allow setting
the remote control at runtime (based on a patch by Darren Salt).
- Now checking whether timers or channels are currently being edited via the menu
before making changes through SVDRP (thanks to Andreas Brugger for reporting a
problem with this).
- Files and directories are now created with rights according to the shell's
umask settings (thanks to Andreas Brachold).
- Fixed the cChannel copy constructor (thanks to Marcel Wiesweg for pointing out
a problem with it).
- Fixed an out-of-bounds memory access with audio language ids (thanks to
Matthias Lenk for reporting, and Udo Richter for suggesting a fix).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added missing storing of the MenuScrollPage parameter (thanks to Frank Krömmelbein).
- Added cRemux::SetTimeouts() for better use of cRemux in a single thread (thanks
to Udo Richter for reporting a problem with this).
- Modified cEITScanner::Process() so that it uses the primary device if it is
replaying and is the only device that provides the given transponder, and that
a forced EPG scan works even if EPG scan timeout is set to 0 (thanks to
Bernhard Stegmaier for reporting a problem with this).
- Fixed cDvbSpuBitmap::putPixel() (thanks to Reinhard Nissl).
- Fixed setting system time to avoid time jumps in case of faulty data (thanks
to Andreas Böttger).
- Fixed a memory leak in the SVDRP command LSTE (thanks to Stefan Huelswitt).
|
|
- Removed an unused variable from cTimer::GetWDayFromMDay() (thanks to Wayne Keer
for reporting this one).
- Some more changes to the 'childTid' handling in cThread (based on suggestions by
Stefan Huelswitt).
- Fixed the spelling of 'canceling' (thanks to Wayne Keer for reporting this one).
- Re-introduced a sleep to cDvbPlayer::Action() to avoid high CPU load in still
picture mode (thanks to Reinhard Nissl for reporting this one).
- Fixed a possible race condition in generating the DVB device names (thanks to
Rainer Zocholl for reporting this one).
- Changed the way PES packets are played to allow replay of AC3 sound over the
full featured DVB cards (partially based on a patch from Werner Fink).
+ The new function cDevice::PlayPes() is now called with the complete PES data
stream and calls PlayVideo() and PlayAudio() as necessary.
+ cDevice::PlayVideo() is now only called with actual video PES packets.
+ cDevice::PlayAudio() is now called with the actual audio PES packets, which
can be either "normal" audio or AC3 data. You need at least firmware version
0x261d to replay AC3 sound over a full featured DVB card. This function now
has an 'int' return value.
+ PlayAudio() of derived cDevice classes shall no longer call the base class
function. It shall just play the given data as audio.
+ cPlayer::PlayVideo() and cPlayer::PlayAudio() are now obsolete and have been
replaced with cPlayer::PlayPes().
+ All StripAudioPackets() functions are now obsolete. The functionality has been
moved into cDevice::PlayPes(), where only the video and audio packets that are
actually required will be processed.
+ All audio track handling is now done by cDevice; cTransfer and cDvbPlayer no
longer care about audio tracks. cPlayer, however, still has the virtual hooks
for audio track handling in order to allow plugins to implement players that
have their own idea about this.
+ cChannel::[AD]pid[12]() have been replaced with cChannel::[AD]pid(int i) to
allow access to all available PIDs.
- Escaped the '-' and 'ö' characters in the man pages (thanks to Darren Salt for
pointing this out).
- Completed the Italian OSD texts (thanks to Sean Carlos).
- Fixed setting 'synced' in cRemux when recording radio channels (thanks to
Laurence Abbott).
- Removed the LOCK_THREAD from the LIRC thread (thanks to Ludwig Nussel).
- Fixed genfontfile.c (sometimes the character width was wrong, and the codes were
shifted one too far to the left).
- Fixed the character width and shifted the codes one to the right in all font
files.
- Renamed font???.c to font???-iso8859-1.c for symmetry.
- Switched the character set to iso8859-15 for English, German and Finnish (thanks
to Andreas Brugger for reporting the missing Euro sign in iso8859-1).
- Added 'channels.conf.terr' entries for Lübeck (thanks to Stefan Hußfeldt).
- Fixed a race condition in starting a thread (thanks to Reinhard Nissl for
reporting this one).
- Replaced non-threadsafe library functions with their threadsafe versions (thanks
to Rainer Zocholl for pointing this out).
- Other non-threadsafe functions have been replaced by threadsafe classes that hide
the actual buffering. In particular these are:
readdir() -> cReadDir
readline() -> cReadLine
- Several formerly non-threadsafe functions now have a return type of cString:
cChannel::ToText()
tChannelID::ToString()
cEvent::GetDateString()
cEvent::GetTimeString()
cEvent::GetEndTimeString()
cEvent::GetVpsString()
cMark::ToText()
cTimer::ToText()
cSource::ToString()
cTimer::PrintDay()
cTimer::PrintFirstDay()
PrefixVideoFileName()
IndexToHMSF()
ChannelString()
strescape()
AddDirectory()
itoa()
WeekDayName()
DayDateTime()
When using these functions in a 'const char *' context there is nothing special
to consider, except that you can no longer have a pointer to the return value,
as in
const char *date = DayDateTime();
Although this will compile without error message, the resulting 'date' will not
be valid after this line. Use this instead:
cString date = DayDateTime();
In a 'const void *' context (as in printf() etc.) the result needs to be
dereferenced with a '*', as in
printf("%s", *DayDateTime());
to make it a 'const char *'.
- Removed delay_ms(), using cCondWait::SleepMs() instead.
- Replaced time_ms() with a threadsafe and non-overflowing cTimeMs (thanks to Rainer
Zocholl for pointing out this problem).
- Added cDevice::mutexReceiver to avoid a race condition when attaching/detaching
receivers from different threads.
- The new remote control button "Audio" can be used to switch between different
audio tracks. The "Green" button in the "Main" menu has been changed from "Language"
to "Audio", since it now also controls switching between normal and Dolby Digital
audio tracks (see MANUAL for details).
- The description of the audio tracks is now taken from the "component descriptors"
that are broadcast in the EPG data. However (as no big surprise), not all channels
actually provide useful data here, so there are now some additional EPG bugfixes,
which can be activated by setting the "EPG bugfix level" to 3.
- The format of the 'epg.data' files has been extended by the new tag 'X', which
contains the stream components of an event (see man vdr(5) for details).
- The cStatus class now has the new member function SetAudioTrack(), which can be
used to get notified when the audio track has been switched, and the new member
function SetAudioChannel() which is called when the audio channel is changed.
- Skins need to implement the new cSkinDisplayTrack class to display the audio
track menu.
- The ST:TNG skin now displays the current audio track description (if any) at the
botton left side.
- The new setup option "DVB/Audio languages" can be used to control which audio
language shall be selected in case a channel broadcasts in different languages
(see MANUAL for details).
- The "Left" and "Right" keys in the "Audio" menu can be used to switch between
the left and right stereo channels in case there are different audio tracks
in these channels (see MANUAL for details).
- Fixed a possible race condition in cDevice::Action() (thanks to Mattias Grönlund).
- Fixed the default quality value when grabbing a JPEG image (thanks to Patrick
Gleichmann).
- Fixed deleting a menu item in case the next item is not selectable (thanks to
Dino Ravnic).
- Implemented displaying mandatory subtitles in the SPU decoder (thanks to Marco
Schlüßler).
- The setup option "Recording/Record Dolby Digital" has been renamed and moved to
"DVB/Use Dolby Digital". It now controls whether Dolby Digital is recorded and
whether an available DD audio track will appear in the "Audio" menu.
- Added support for circular polarization (thanks to Jonan Santiago).
- Thanks to Werner Fink, Reinhard Nissl, Sascha Volkenandt and Bjørnar Nilsen for
their support in testing and fine tuning this version.
|
|
- In order to avoid problems on NPTL systems, VDR now checks for the presence
of NPTL at program start, and if it is, exits and tells the user to do
'export LD_ASSUME_KERNEL=2.4.1' before starting VDR.
- Revisited the "Fixed missing audio after replaying a DVD" change because it
introduced a sound disturbance when switching between channels on the same
transponder (thanks to Marco Schlüßler).
- In order to avoid problems on UTF-8 systems, VDR now checks for the presence
of UTF-8 at program start, and if it is, exits and tells the user to turn off
UTF-8 before starting VDR (thanks to Ludwig Nussel for pointing out a problem
with systems that are set to use UTF-8). There are also problems in case the
video partition is mounted with "iocharset=utf8" (thanks to Jörg Knitter for
reporting this one).
Please also read the "IMPORTANT NOTES" section in the INSTALL file!
- Some changes to the SPU decoder interface (thanks to Sven Goethel).
- Some improvements in cOsd creation (thanks to some suggestions by Jouni Karvo).
- Fixed calculating the OSD width and height (thanks to Olaf Henkel for reporting
a problem with long event texts in the "Classic VDR" skin).
- Fixed switching channels while an encrypted channel is being recorded, because the
channel was switched if the new channel was on the same transponder and was
a radio channel or an unencrypted channel (thanks to Martin Dauskardt for reporting
this one).
- No longer using the external 'find' command to scan the video directory for
recordings (based on a suggestion by Mirko Dölle).
- The list of recordings is now kept statically in memory to avoid long delays
when opening the "Recordings" menu. As a side effect, external modifications to
the video directory are no longer immediately reflected in the "Recordings" menu.
If a plugin manipulates the video directory in any way, it can call the function
Recordings.TriggerUpdate() to trigger an update of the list of recordings.
If some external tool manipulates the video directory, it can touch the file
'.update' in the video directory to trigger an update of the list of recordings.
- Fixed a memory leak in theme description handling (thanks to Sascha Volkenandt).
- Added cDevice::Flush() to make sure that all data in the video card's buffers
has been processed (thanks to Reinhard Nissl). Currently this is not yet actually
implemented for FF DVB cards.
- Fixed handling the color button texts in cMenuEditStrItem (thanks to Maynard
Cedric for reporting this one).
- Fixed the description of cRingBufferLinear (thanks to Ludwig Nussel for pointing
out this one).
- Fixed cRingBufferLinear::Get() in case the buffer wraps around (thanks to Ludwig
Nussel for reporting this one).
|
|
- Fixed a memory leak in thread handling when using NPTL (thanks to Jon Burgess).
- Fixed handling Setup.RecordDolbyDigital, which was broken since version 1.1.6.
- Fixed handling text lengths for itemized EPG texts (thanks to Marcel Wiesweg).
- Fixed the help for LSTE and LSTR (was broken in 1.3.6).
- Improved iso8859-7 fonts (thanks to Dimitrios Dimitrakos).
- Added some 3-letter language codes (thanks to Marcus Mönnig).
- Added language code handling to the subtitling descriptor in 'libsi' (thanks to
Pekka Virtanen).
- Moved several menu item classes from menu.c to menuitems.[hc] to make them
available for plugins.
- The epg2html.pl script now handles '|' in description texts.
- The new setup option "OSD/Use small font" can be used to control the use of
the small font (see MANUAL for details).
- Swapped osd.[hc] and osdbase.[hc] to have the virtual OSD base class named cOsd.
Plugins may need to adjust their #include statements.
- Colors are now given as AARRGGBB instead of AABBGGRR. The values are mapped to
the driver's (wrong) sequence in dvbosd.c (this should really be fixed in the
driver, together with the endian problem).
- The new OSD setup parameters "Left" and "Top" can be used to define the top left
corner of the OSD.
- The OSD size parameters are now in pixel (as opposed to formerly characters).
When reading a 'setup.conf' file from an older version of VDR, the OSDwidth
and OSDheight values will be converted to pixel automatically.
- The OSD is now fully device independent. See the comments in VDR/osd.h and the
description in PLUGINS.html for information on how a plugin can implement an OSD
display on arbitrary hardware.
- The OSD (actually its cBitmap class) can now handle XPM files. There are several
XPM files in the VDR/symbols directory which can be used by skins (some of these
have been taken from the "elchi" patch). See VDR/skinsttng.c for examples on how
to use these.
- Due to the changes in the OSD handling the DEBUG_OSD option for a textual OSD
has been dropped. There will be a plugin that implements a skin with this
functionality later.
- The entire OSD display can now be implemented via "skins". See VDR/skins.[hc],
VDR/skinclassic.[hc], VDR/skinsttng.[hc] and PLUGINS.html for information on how
a plugin can implement its own skin. By default VDR comes with a "Classic" skin
that implements the OSD display known from previous versions, and the new skin
named "ST:TNG Panels", which is also the default skin now. The actual skin can
be selected through "Setup/OSD/Skin".
- The colors used in a skin can now be configured using "themes". See PLUGINS.html
for information on how a skin can make use of themes, and man vdr(5) for the
structure of a theme file. The actual theme to use can be selected through
"Setup/OSD/Theme".
- Added Croatian language texts (thanks to Drazen Dupor).
NOTE: there is apparently a problem with the newly introduced iso8859-2 font,
because as soon as Setup/OSD/Language is set to Croatian (currently the last one
in the list) everything freezes and the vdr processes have to be killed with -9
and the driver needs to be reloaded. Maybe somebody else can find out what's
going wrong here...
- Added missing NULL checks when accessing sectionHandler in device.c (thanks to
Pekka Virtanen).
- Fixed setting the time from the DVB data stream (thanks to Helmut Auer for
pointing out a frequency/transponder handling mixup). This now also takes the
actual source (sat, cable etc.) into account. Please go into "Setup/EPG" and
set the "Set system time" and "Use time from transponder" parameters accordingly
(this is necessary even if you have already set them before!).
|
|
- Some corrections to the French OSD texts (thanks to Olivier Jacques).
- Fixed some missing commas in i18n.c (thanks to Dimitrios Dimitrakos for
reporting this problem).
- Some corrections to the Finnish OSD texts (thanks to Niko Tarnanen and Rolf
Ahrenberg).
- Completed the Italian OSD texts (thanks to Antonio Ospite).
- Fixed breaking off replay in case the user hits "Play" or "Pause" too soon after
going into "Pause live video" mode (thanks to Karim Afifi for reporting ths one).
- Some corrections to the Catalanian OSD texts (thanks to Jordi Vilà ).
- Single event timers are now deleted if the recording they are doing is
deleted before the timer ends.
- Fixed an uninitialized variable in cDisplayChannel (thanks to Stefan Huelswitt).
- Fixed a possible access of invalid file handles in cSIProcessor::Action()
(thanks to Stefan Huelswitt).
|
|
- Fixed minimum lifespan of deleted recordings (thanks to Jaakko Hyvätti).
- Updated French OSD texts (thanks to Olivier Jacques).
- Fixed paging through lists with repeated Left/Right keys.
- Fixed setting the PCR-PID in case it is equal to one of the other PIDs (thanks
to Oliver Endriss for reporting this one).
- Fixed double call to MainMenuAction() of a plugin if invoked via a hotkey (thanks
to Kai Moeller for reporting this one).
- Fixed handling dedicated keys.
- Now turning off live PIDs when replaying. This avoids short spikes from other
channels when switching between Transfer Mode channels, and also lets an ongoing
replay continue even if a recording is started on the primary device.
- The RCU channel display no longer changes when a recording on a different
channel starts on the primary device.
- Restoring the current channel in case a recording has switched the transponder.
If all devices are busy and none of them can provide the current channel, the
message "Channel not available!" will be displayed.
- Removed the (no longer necessary) 'panic' stuff from cThread.
- Added cStatus::OsdItem() to provide the entire list of menu items to a plugin
(thanks to Carsten Siebholz).
- The red ("Record") and yellow ("Pause") button in the "Main" menu are no longer
available when replaying.
|
|
- Added new entries to 'ca.conf'.
- Fixed closing unused PID handles (thanks to Stefan Schluenss for reporting this
one).
- Added more examples to 'diseqc.conf' (thanks to Oliver Endriss).
- Fixed disabling multiple recordings on a single DVB card (comment out the definition
of the macros DO_REC_AND_PLAY_ON_PRIMARY_DEVICE and DO_MULTIPLE_RECORDINGS in
dvbdevice.c).
- Plugins can now have their very own OSD setup in the object they return from
a call to cPlugin::MainMenuAction(). In order to implement this, the return type
of cPlugin::MainMenuAction() had to be changed from (cOsdMenu *) to (cOsdObject *).
So in case you are compiling an existing plugin with this version of VDR and you
get an error message, simply change cOsdMenu to cOsdObject in the plugin's source
for the MainMenuAction() function.
Plugin authors who have so far (ab)used the cControl mechanism to implement their
own raw OSD should take a look at the new demo plugin 'osddemo'. It implements
a very primitive game that shows how a plugin can have its own raw OSD. Especially
look into cLineGame and see how it implements the Show() function. See also
the chapter on "User interaction" in PLUGINS.html.
- Added three new fields to the lines in 'channels.conf': NID, TID and RID. NID and
TID are the Network and Transport Stream IDs, respectively. RID is an additional ID
that can be used to tell apart channels that would otherwise be indistinguishable.
This is typically the case with radio channels, which may have the same NID, TID
and SID, but different "radio IDs". This new field is therefore called RID ("radio
ID"). Currently NID and TID are not yet used by VDR and should always be 0. The
RID is actually used when building the "unique channel ID", so if you have channels
in your 'channels.conf' file that cause error messages when loading, you can set
the RIDs of these channels to different values.
When reading an old 'channels.conf' these new fields will be automatically
initialized to 0 and once the file is written back to disk they will be appended
to the channel definitions.
Thanks to Régis Bossut for pointing out that with some providers the channels can
only be distinguished through the RID.
- The "unique channel ID" now contains an optional 5th part (the RID). See man vdr(5).
- Updated 'channels.conf.cable' and made some channels unique using the new RID
(thanks to Andreas Kool for pointing out the problems).
- Made some channels unique in 'channels.conf.terr' using the new RID.
- Extended the '-l' option to allow logging to LOG_LOCALn (n=0..7) by writing, for
instance, '-l 3.7' (suggested by Jürgen Schmidt).
- Now deleting stale lock files if they have a time stamp that is outside the window
'now +/- LOCKFILESTALETIME'. This improves things in cases where the system time
makes far jumps, so that a lock file might end up with a time stamp that lies
in the distant future (thanks to Oliver Endriss).
|
|
- Begin of the 1.1 development branch. THIS IS NOT A STABLE VERSION!
The current stable version for every day use is still the 1.0 branch.
- First step towards a universal plugin interface. See the file PLUGINS.html
for a detailed description. The man page vdr(1) describes the new options '-L'
and '-P' used to load plugins. This first step implements the complete "outer"
shell for plugins. The "inner" access to VDR data structures will follow.
- The VDR version number is now displayed in the title line of the "Setup" menu.
|
|
- Fixed a problem with wrong EPG data in the Schedules menu (thanks to Tobias
Kerner, problem was initially reported by Michel Moster, but somehow I had
misplaced his message...).
- Added Spanish language texts (thanks to Ruben Nunez Francisco).
- Fixed resetting the "First day" timer parameter once the timer actually starts
recording.
- Fixed the still picture workaround in case the progress display is active
(thanks to Gerald Raaf).
- Fixed a problem with accessing the epg.data file before it is fully written
(thanks to Thilo Wunderlich for reporting this one).
- Now the EPG scan skips channels that have their 'Ca' parameter explicitly set
to an other DVB card (suggested by Sergei Haller).
- Fixed a possible hangup when reading a broken epg.data file (thanks to Henning
Holtschneider for pointing this one out).
- Fixed a bug in the editing process in case a previously edited file with the
same name was manually deleted on a system with more than one video directory
(thanks to Dirk Wiebel for reporting this one).
|
|
- Fixed restoring CICAM setup values for a fourth DVB card (thanks to Klaus Wolf).
- Completed internationalization of OSD texts (thanks to Hannu Savolainen,
Arnold Niessen, Paulo Lopes, Jean-Claude Repetto, Alberto Carraro, Matjaz
Thaler and Truls Slevigen).
- Improved file I/O in case of EINTR, which may occur e.g. with heavy system
load (thanks to Werner Fink).
- Now writing the title of a recording into the 'summary.vdr' file.
- Workaround for displaying still frames with the unpatched LinuxDVB driver
(if anybody ever finds out why the unpatched driver doesn't display VDR's
still frames, please let me know).
- When executing a command from the "Commands" menu, the title of that command
is now immediately shown in the status line (followed by "...") to give the
user some feedback that the command is being executed, which is especially
important if this takes some time.
- Fixed scrolling the "Channels" menu in case the cursor ends up on a group
delimiter (thanks to Bernd Zierath for helping to debug this one).
- Added manual pages vdr(1) and vdr(5) (which made the FORMATS file obsolete).
- New command command line option '-V' to display the VDR version.
- Adjusting column width for channel numbers in case there are more than 999
channels.
- Checking the return value of '...FileRady...' calls in dvbapi.c for better
performance under heavy system load.
- New 'make' target 'install', which copies the manual pages and executables
to their appropriate system locations and creates the /video directory if
it doesn't exist yet.
- Automatic hotkey assignment is now suppressed if the first entry in
commands.conf starts with a digit in the range '1'...'9', followed by a blank.
- Fixed a bug in switching back the replay mode display in time shift mode
(thanks to Achim Lange for reporting this one).
- Fixed a bug in the 'First day' timer parameter for timers that record over
midnight.
- Added units to Setup parameters.
- Changed time entry in the 'Jump' command during replay, so that it is filled
up from right to left.
- Now using statfs() to determine the amount of free disk space, which avoids
the use of an external 'df' command (thanks to Ruben Nunez Francisco).
- Fixed skipping the next hit of a repeating timer (thanks to Rainer Zocholl
for reporting this one).
- Fixed a bug when a timer records over midnight of a day that had a change in
Daylight Saving Time.
- Added Polish language texts (thanks to Michael Rakowski).
- Fixed a bug in parsing group separators in channels.conf (thanks to Henning
Holtschneider for reporting this one).
- Changed the default 'Ok' key when using the PC keyboard from '5' (in the
numeric block) to 'Enter', because the '5' key didn't work on keyboards with
the F-keys on top.
- Fixed a bug in the EPG bugfix mechanism if the extended description is shorter
than 3 characters (thanks to Andreas Schultz).
|
