From f2937af95ceaf3a52c327e96571367ef5475b3a1 Mon Sep 17 00:00:00 2001
From: Klaus Schmidinger <kls (at) cadsoft (dot) de>
Date: Sat, 24 Feb 2001 18:00:00 +0100
Subject: Version 0.71 - Fixed 'Transfer Mode' in cases where a non-primary
 interface was switched to   a channel that only the primary interface can
 receive (which could happen in   the EPG scanner). - The EPG scanner now
 starts with the first channel (it used to start with the   second channel). -
 Reacitvated setting the PNR. - Adapted the frame scanning to the new muxing
 of the driver. - The new compile time option REMOTE=NONE can be used to
 compile VDR without   any remote control support (for applications where it
 shall be controlled   exclusively via SVDRP). - The new command line option
 -D can be used to define which DVB interfaces   a certain instance of VDR
 shall use. - The "Left" and "Right" keys are now used to page up and down in
 lists (thanks   to Martin Hammerschmid). Since the "Timers" menu already uses
 these keys to   (de)activate timers, this functionality is not available
 there. - The "Main" and "Commands" menu now support "hotkeys", which means
 that if the   first non-blank character of a menu item is a digit in the
 range 1..9, that   item can be selected by pressing the respective numeric
 key on the remote   control. - The channel data in 'channels.conf' now
 contains the teletext PID (thanks to   Dave Chapman). Existing files will be
 read normally (and the teletext PID set   to 0), but once they are written
 back (due to some channel editing) the file   will have the new format. - The
 EPG scanner now scans each transponder only once per cycle. - Deleted
 recordings are now automatically removed from disk after a while (not   only
 when disk space is being needed for a new recording). - Fixed repeat function
 in LIRC remote control. - Changed the MAXDVBAPI macro in dvbapi.c to 4 in
 order to directly support the   maximum possible number of DVB cards. - The
 'Ca' parameter in the default 'channels.conf' has been changed from '2'   to
 '3' because the VDR prototype now has 3 DVB cards (and currently the CAM  
 module only works if it is inserted into the last DVB card). - The "Now",
 "Next" and "Schedule" menus now remember the current channel and   restore
 the list when switching between them. - The "Green" button in the
 "Recordings" menu can now be used to rewind a   recording and play it from
 the very beginning. - Fixed handling ':' in timer filenames and '\n' in timer
 summaries (see FORMATS). - When removing recordings empty directories are now
 removed from the video   directory. - Added the "schnitt" tools from Matthias
 Schniedermeyer. - New SVDRP command MESG to display a short message on the
 OSD. - The Perl script 'svdrpsend.pl' can be used to send SVDRP commands to
 VDR. - SVDRP can now immediately reuse the same port if VDR is restarted. -
 SVDRP now has a timeout after which the connection is automatically closed  
 (default is 300 seconds, can be changed in "Setup"). - The compile time
 switch VFAT can be used to make VDR avoid the ':' character   in file names
 (VFAT can't handle them). Do 'make VFAT=1' to enable this. - Support for
 DVB-C (thanks to Hans-Peter Raschke and Peter Hofmann).   See the INSTALL
 file for more information about the use of VDR with cable. - Fixed an
 occasional segfault in the EIT processor. - A value of '0' for the
 EPGScanTimeout setup parameter now completely turns off   scanning for EPG
 data on both single and multiple card systems. - New setup parameter
 "PrimaryLimit" that allows to prevent timers from using the   primary DVB
 interface in multi card systems. Default value is 0, which means   that every
 timer may use the primary interface. - The 'active' field of a timer will now
 be explicitly set to '1' if the user   modifies an active timer (see FORMATS
 for details). - The new command line option -w can be used to activate a
 watchdog that makes   VDR exit in case the main program loop does not respond
 for more than the   given number of seconds. This is mainly useful in
 combination with the new   'runvdr' script that restarts VDR in case is has
 exited.

---
 Tools/schnitt/index.php | 215 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 215 insertions(+)
 create mode 100644 Tools/schnitt/index.php

(limited to 'Tools/schnitt/index.php')

diff --git a/Tools/schnitt/index.php b/Tools/schnitt/index.php
new file mode 100644
index 0000000..58a288f
--- /dev/null
+++ b/Tools/schnitt/index.php
@@ -0,0 +1,215 @@
+<html>
+<head>
+  <title>Schneiden</title>
+</head>
+<body bgcolor=#C0C0C0>
+<?
+if ($level == 0)
+  {
+    $dircount=0;
+    $handle=opendir('/x1/video');
+    while ($file = readdir($handle)) {
+        if ($file != "." && $file != ".." && $file != "epg.data") { 
+          $dir=$file;
+          $dircount++;
+        }
+    }
+  if ($dircount == 1) {
+    $level=1;
+    }
+  else
+  {
+?>
+<center><h1>Sender</h1></center>
+<form action="index.php" method="post">
+<input type=hidden name=level value="1">
+<?
+      $handle=opendir('/x1/video');
+      while ($file = readdir($handle)) {
+          if ($file != "." && $file != ".." && $file != "epg.data") { 
+              echo "<input type=submit name=dir value=\"$file\">\n"; 
+          }
+      }
+      closedir($handle); 
+?>
+</form>
+<?
+    }
+  }
+if ($level == 1)
+  {
+    $dircount=0;
+    $handle=opendir("/x1/video/$dir");
+    while ($file = readdir($handle)) {
+        if ($file != "." && $file != "..") { 
+          $dira="$dir/$file";
+          $dircount++;
+        } 
+    }
+    if ($dircount == 1) {
+      $dir = $dira;
+      $level = 2;
+    }
+    else
+    {
+?>
+<form action="index.php" method="post">
+<input type=hidden name=level value="2">
+<?
+      echo "<center><h1>Filme/Serien fuer den Sender $dir</h1></center>";
+      $handle=opendir("/x1/video/$dir");
+      while ($file = readdir($handle)) {
+          if ($file != "." && $file != "..") { 
+              echo "<input type=submit name=dir value=\"$dir/$file\"><br>\n"; 
+          } 
+      }
+      closedir($handle); 
+?>
+</form>
+<?
+    }
+  }
+if ($level == 2)
+  {
+if ($aindex)
+  $index = $aindex;
+else if (!$index)
+  $index = 0;
+
+if ($dir)
+  chdir ("/x1/video/$dir");
+
+switch ($cindex) {
+  case "-10000": 
+      if ($index >=10000)
+        $index -= 10000;
+	break;
+  case "-4000": 
+      if ($index >=4000)
+        $index -= 4000;
+	break;
+  case "-2000": 
+      if ($index >=2000)
+        $index -= 2000;
+	break;
+  case "-1000": 
+      if ($index >=1000)
+        $index -= 1000;
+	break;
+  case "-500": 
+      if ($index >=500)
+        $index -= 500;
+	break;
+  case "-100": 
+      if ($index >=100)
+        $index -= 100;
+	break;
+  case "Vorheriges I-Frame":
+        $pindex = $index - 1;
+        $fp = popen ("/usr/local/bin/my/getpreviframe.pl $pindex","r");
+        $i = fgets($fp,1000);
+        $index = chop ($i);
+        pclose ($fp);
+        break;
+  case "Naechstes I-Frame":
+        $index ++;
+        break;
+  case "+100":
+        $index += 100;
+	break;
+  case "+500":
+        $index += 500;
+	break;
+  case "+1000":
+        $index += 1000;
+	break;
+  case "+2000":
+        $index += 2000;
+	break;
+  case "+4000":
+        $index += 4000;
+	break;
+  case "+10000":
+        $index += 10000;
+	break;
+  }
+
+if ($test)
+  {
+    $fp = popen ("/usr/local/bin/my/schnitt3.pl $index","r");
+    $i = fgets($fp,1000);
+    pclose ($fp);
+    $index = chop ($i);
+  }
+
+if ($name)
+  {
+    $fp = fopen ("cut","w");
+    fputs ($fp,"$name\n");
+    fclose ($fp);
+  }
+
+if ($cut)
+  {
+    $fp = fopen ("cut","a");
+    fputs ($fp,"$index\n");
+    fclose ($fp);
+  }
+
+$fp = popen ("/usr/local/bin/my/schnitt.pl $index","r");
+$i = fgets($fp,1000);
+pclose ($fp);
+$index = chop ($i);
+
+system ("/usr/local/bin/my/dumpframe /x2/temp/bild.m2v");
+system ("mv output.ppm /x2/temp");
+system ("touch /x2/temp/newpic");
+system ("killall sleep");
+?>
+<form action="index.php" method="post">
+<input type=hidden name=level value="2">
+<input type=hidden name=dir value="<?=$dir?>">
+<input type=hidden name=index value=<?=$index?>>
+<table width=90% align=center>
+<tr>
+<td><h1>Index <?=$index?></h1></td>
+<td><h1>Dir: <?=$dir?></h1></td>
+</tr>
+</table>
+<table width=80% align=center>
+<tr>
+<td><input type=submit name=cindex value="-10000"></td>
+<td><input type=submit name=cindex value="-4000"></td>
+<td><input type=submit name=cindex value="-2000"></td>
+<td><input type=submit name=cindex value="-1000"></td>
+<td><input type=submit name=cindex value="-500"></td>
+<td><input type=submit name=cindex value="-100"></td>
+<td><input type=submit name=cindex value="Vorheriges I-Frame"></td>
+<td><input type=submit name=cindex value="Naechstes I-Frame"</td>
+<td><input type=submit name=cindex value="+100"></td>
+<td><input type=submit name=cindex value="+500"></td>
+<td><input type=submit name=cindex value="+1000"></td>
+<td><input type=submit name=cindex value="+2000"></td>
+<td><input type=submit name=cindex value="+4000"></td>
+<td><input type=submit name=cindex value="+10000"></td>
+</tr>
+</table>
+<table>
+<tr>
+<td>Absoluter Index: <input type=text name=aindex size=6></td>
+<td><input type=submit name=test value="Schnitt-Test"></td>
+<td><input type=submit name=cut value="Mark"></td>
+</form>
+<form action="index.php" method="post">
+<input type=hidden name=level value="2">
+<input type=hidden name=dir value="<?=$dir?>">
+<input type=hidden name=index value=<?=$index?>>
+<td>Titel: <input type=text name=name size=50 maxlength=255></td>
+</form>
+</tr>
+</table>
+<?
+}
+?>
+</body>
+</html>
-- 
cgit v1.2.3