Version 1.7.22

Original announce message:
VDR developer version 1.7.22 is now available at

       ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22.tar.bz2

A 'diff' against the previous version is available at

       ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21-1.7.22.diff

MD5 checksums:

b9c0fe1aac8e653c0d0234bc72c2bb2c  vdr-1.7.22.tar.bz2
868bb332342c9a78beda17cc85e0bb93  vdr-1.7.21-1.7.22.diff

WARNING:
========

This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.

From the HISTORY file:
- Fixed scaling subtitles in case the primary device's GetVideoSize() function doesn't
  return actual values (thanks to Luca Olivetti).
- The DiSEqC codes are now copied in the call to cDiseqc::Execute().
- VDR now supports "Satellite Channel Routing" (SCR) according to EN50494 (based on
  the "unicable" patch from Lars Hanisch).
  Since "Unicable" is a registered trademark and stands for only one of many
  implementations of SCR, the following changes have been made compared to the patch,
  which need to be taken into account by people who have set up their system using
  the patch:
  - The 'U' parameter in the diseqc.conf file has been changed to 'S' ("Scr").
  - The configuration file name has been changed from "unicable.conf" to "scr.conf".
- Updated sources.conf (thanks to Arthur Konovalov).
- The SVDRP command LSTC now also accepts channel IDs (thanks to Dominic Evans).
- Fixed handling DVB subtitles and implemented decoding textual DVB subtitles (thanks
  to Rolf Ahrenberg).
- Added cap_net_raw to the capabilities that are not dropped (thanks to Dominic Evans).
- Fixed setting the start time of an edited recording (thanks to Christoph Haubrich).
- Temporarily switching free devices to transponders in order to have their running
  status updated is now done by marking the devices as "occupied" for a certain
  amount of time.
- The new setup options "LNB/Device n connected to sat cable" can be used to define
  which DVB-S devices are connected to the same sat cable and are therefore "bonded".
  This obsoletes the LNBSHARE patch. Users of the LNBSHARE patch will need to newly
  set up their sat devices with the above options.
- Fixed a crash when deleting a recording while cutting it (thanks to Ville Skyttä).
- Fixed several spelling errors (thanks to Ville Skyttä).
- The new SVDRP command UPDR can be used to trigger an update of the list of
  recordings (thanks to Lars Hanisch).
- Added generating a pkg-config file to the Makefile (thanks to Ville Skyttä).
- Removed the '.pl' suffix from all scripts (thanks to Ville Skyttä).
- Changed the default location for the LIRC socket to /var/run/lirc/lircd (thanks
  to Ville Skyttä).
- Added file name and line number to LOG_ERROR_STR() (thanks to Rolf Ahrenberg).
- Replaced all calls to sleep() with cCondWait::SleepMs() (thanks to Rolf Ahrenberg).
- Fixed a crash with malformed SI data (patch from vdr-portal).

28 files changed, 224 insertions, 28 deletions

diff --git a/po/ar.po b/po/ar.po
index d3dd29a..c936078 100644
--- a/po/ar.po
+++ b/po/ar.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.7.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2008-10-16 11:16-0400\n"
 "Last-Translator: Osama Alrawab <alrawab@hotmail.com>\n"
 "Language-Team: Arabic <ar@li.org>\n"
@@ -983,6 +983,13 @@ msgstr "التردد المنخفض للاقط م هرتز"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "التردد المرتفع للاقط م هرتز"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "اعادة تشغيل الكامة"
 
diff --git a/po/ca_ES.po b/po/ca_ES.po
index b104fea..d609cda 100644
--- a/po/ca_ES.po
+++ b/po/ca_ES.po
@@ -10,7 +10,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2008-03-02 19:02+0100\n"
 "Last-Translator: Luca Olivetti <luca@ventoso.org>\n"
 "Language-Team: Catalan <vdr@linuxtv.org>\n"
@@ -965,6 +965,13 @@ msgstr "Freq��ncia LNB baixa (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Freq��ncia LNB alta (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "Reiniciar CAM"
 
diff --git a/po/cs_CZ.po b/po/cs_CZ.po
index bcafac7..eef8257 100644
--- a/po/cs_CZ.po
+++ b/po/cs_CZ.po
@@ -9,7 +9,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.7.14\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2010-05-06 11:00+0200\n"
 "Last-Translator: Radek Šťastný <dedkus@gmail.com>\n"
 "Language-Team: Czech <vdr@linuxtv.org>\n"
@@ -964,6 +964,13 @@ msgstr "Dolní frekvence LNB (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Horní frekvence LNB (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "Reset CAMu"
 
diff --git a/po/da_DK.po b/po/da_DK.po
index 81b11eb..db6b398 100644
--- a/po/da_DK.po
+++ b/po/da_DK.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2007-08-12 14:17+0200\n"
 "Last-Translator: Mogens Elneff <mogens@elneff.dk>\n"
 "Language-Team: Danish <vdr@linuxtv.org>\n"
@@ -962,6 +962,13 @@ msgstr "Nedre LNB frekvens (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "�vre LNB frekvens (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "CAM nulstil"
 
diff --git a/po/de_DE.po b/po/de_DE.po
index 6d5b822..4a475d7 100644
--- a/po/de_DE.po
+++ b/po/de_DE.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2010-01-16 16:46+0100\n"
 "Last-Translator: Klaus Schmidinger <kls@tvdr.de>\n"
 "Language-Team: German <vdr@linuxtv.org>\n"
@@ -962,6 +962,13 @@ msgstr "Untere LNB-Frequenz (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Obere LNB-Frequenz (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr "Device %d angeschlossen an Sat-Kabel"
+
+msgid "Setup.LNB$own"
+msgstr "eigenes"
+
 msgid "CAM reset"
 msgstr "CAM zur�ckgesetzt"
 
diff --git a/po/el_GR.po b/po/el_GR.po
index 9756ea7..64300f0 100644
--- a/po/el_GR.po
+++ b/po/el_GR.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2007-08-12 14:17+0200\n"
 "Last-Translator: Dimitrios Dimitrakos <mail@dimitrios.de>\n"
 "Language-Team: Greek <vdr@linuxtv.org>\n"
@@ -962,6 +962,13 @@ msgstr "���� LNB-��������� (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "��� LNB-��������� (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr ""
 
diff --git a/po/es_ES.po b/po/es_ES.po
index 193e75e..288ad69 100644
--- a/po/es_ES.po
+++ b/po/es_ES.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2008-03-02 19:02+0100\n"
 "Last-Translator: Luca Olivetti <luca@ventoso.org>\n"
 "Language-Team: Spanish <vdr@linuxtv.org>\n"
@@ -963,6 +963,13 @@ msgstr "Frecuencia inferior del LNB (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Frecuencia superior del LNB (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "Reset CAM"
 
diff --git a/po/et_EE.po b/po/et_EE.po
index 49794dd..c12f31f 100644
--- a/po/et_EE.po
+++ b/po/et_EE.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2007-08-12 14:17+0200\n"
 "Last-Translator: Arthur Konovalov <artlov@gmail.com>\n"
 "Language-Team: Estonian <vdr@linuxtv.org>\n"
@@ -962,6 +962,13 @@ msgstr "LO LNB sagedus (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "HI LNB sagedus (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "CAM taask�ivitamine"
 
diff --git a/po/fi_FI.po b/po/fi_FI.po
index b093e88..d0d1225 100644
--- a/po/fi_FI.po
+++ b/po/fi_FI.po
@@ -10,7 +10,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2007-08-15 15:52+0200\n"
 "Last-Translator: Rolf Ahrenberg <rahrenbe@cc.hut.fi>\n"
 "Language-Team: Finnish <vdr@linuxtv.org>\n"
@@ -965,6 +965,13 @@ msgstr "LNB-alataajuus (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "LNB-ylätaajuus (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "CAM nollaus"
 
diff --git a/po/fr_FR.po b/po/fr_FR.po
index b5c5120..5f8b411 100644
--- a/po/fr_FR.po
+++ b/po/fr_FR.po
@@ -13,7 +13,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2008-02-27 18:14+0100\n"
 "Last-Translator: Jean-Claude Repetto <jc@repetto.org>\n"
 "Language-Team: French <vdr@linuxtv.org>\n"
@@ -968,6 +968,13 @@ msgstr "Fr�quence basse LNB (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Fr�quence haute LNB (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "CAM remis � z�ro"
 
diff --git a/po/hr_HR.po b/po/hr_HR.po
index ed519a2..681cb79 100644
--- a/po/hr_HR.po
+++ b/po/hr_HR.po
@@ -9,7 +9,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2008-03-17 19:00+0100\n"
 "Last-Translator: Adrian Caval <anrxc@sysphere.org>\n"
 "Language-Team: Croatian <vdr@linuxtv.org>\n"
@@ -964,6 +964,13 @@ msgstr "Donja LNB frekv. (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Gornja LNB frekv. (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "Ponovno pokreni CAM"
 
diff --git a/po/hu_HU.po b/po/hu_HU.po
index 17b905f..bebf6ef 100644
--- a/po/hu_HU.po
+++ b/po/hu_HU.po
@@ -10,7 +10,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2007-12-01 21:42+0200\n"
 "Last-Translator: Istv�n F�ley <ifuley@tigercomp.ro>\n"
 "Language-Team: Hungarian <vdr@linuxtv.org>\n"
@@ -965,6 +965,13 @@ msgstr "Als� LNB-frekvencia (MHZ)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Fels� LNB-frekvencia (MHZ)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "CAM �jraind�t�s"
 
diff --git a/po/it_IT.po b/po/it_IT.po
index 501300e..6015881 100644
--- a/po/it_IT.po
+++ b/po/it_IT.po
@@ -11,7 +11,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2010-06-13 00:30+0100\n"
 "Last-Translator: Diego Pierotto <vdr-italian@tiscali.it>\n"
 "Language-Team: Italian <vdr@linuxtv.org>\n"
@@ -969,6 +969,13 @@ msgstr "Freq LO LNB (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Freq HI LNB (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "Reimposta la CAM"
 
diff --git a/po/lt_LT.po b/po/lt_LT.po
index 6cb1faa..53d2422 100644
--- a/po/lt_LT.po
+++ b/po/lt_LT.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.7.16\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2010-10-30 11:55+0200\n"
 "Last-Translator: Valdemaras Pipiras <varas@ambernet.lt>\n"
 "Language-Team: Lithuanian <vdr@linuxtv.org>\n"
@@ -962,6 +962,13 @@ msgstr "Žemasis LNB dažnis (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Aukštasis LNB dažnis (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "Dekodavimo modulis (CAM) perkrautas"
 
diff --git a/po/mk_MK.po b/po/mk_MK.po
index 0d22563..5fa3634 100644
--- a/po/mk_MK.po
+++ b/po/mk_MK.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR-1.7.14\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2010-03-11 00:54+0100\n"
 "Last-Translator: Dimitar Petrovski <dimeptr@gmail.com>\n"
 "Language-Team: Macedonian <en@li.org>\n"
@@ -963,6 +963,13 @@ msgstr "Долна LNB фрекфенција (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Форна LNB фрекфенција (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "Рестартирај CAM"
 
diff --git a/po/nl_NL.po b/po/nl_NL.po
index ae2b85e..65aaba7 100644
--- a/po/nl_NL.po
+++ b/po/nl_NL.po
@@ -11,7 +11,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2008-02-26 17:20+0100\n"
 "Last-Translator: Johan Schuring <johan.schuring@vetteblei.nl>\n"
 "Language-Team: Dutch <vdr@linuxtv.org>\n"
@@ -966,6 +966,13 @@ msgstr "Laagste LNB frequentie (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Hoogste LNB frequentie (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "CAM herstarten"
 
diff --git a/po/nn_NO.po b/po/nn_NO.po
index 8ec8dfb..a8ea942 100644
--- a/po/nn_NO.po
+++ b/po/nn_NO.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2007-08-12 14:17+0200\n"
 "Last-Translator: Truls Slevigen <truls@slevigen.no>\n"
 "Language-Team: Norwegian Nynorsk <vdr@linuxtv.org>\n"
@@ -963,6 +963,13 @@ msgstr "LO-frekvens i lavb�ndet (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "LO-frekvens i h�yb�ndet (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr ""
 
diff --git a/po/pl_PL.po b/po/pl_PL.po
index a5c1b47..94ba692 100644
--- a/po/pl_PL.po
+++ b/po/pl_PL.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2008-03-09 12:59+0100\n"
 "Last-Translator: Michael Rakowski <mrak@gmx.de>\n"
 "Language-Team: Polish <vdr@linuxtv.org>\n"
@@ -963,6 +963,13 @@ msgstr "Dolna cz�stotliwo�� LNB (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "G�rna cz�stotliwo�� LNB (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "CAM zresetowany"
 
diff --git a/po/pt_PT.po b/po/pt_PT.po
index c443312..272ab75 100644
--- a/po/pt_PT.po
+++ b/po/pt_PT.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.7.15\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2010-03-28 22:49+0100\n"
 "Last-Translator: Cris Silva <hudokkow@gmail.com>\n"
 "Language-Team: Portuguese <vdr@linuxtv.org>\n"
@@ -963,6 +963,13 @@ msgstr "Frequ�ncia baixa do LNB (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Frequ�ncia alta do LNB (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "Reiniciar CAM"
 
diff --git a/po/ro_RO.po b/po/ro_RO.po
index f8c5a1e..414ade1 100644
--- a/po/ro_RO.po
+++ b/po/ro_RO.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.7.12\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2011-03-10 23:52+0100\n"
 "Last-Translator: Lucian Muresan <lucianm@users.sourceforge.net>\n"
 "Language-Team: Romanian <vdr@linuxtv.org>\n"
@@ -965,6 +965,13 @@ msgstr "Frecvn�� LNB inferioar� (Mhz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Frecvn�� LNB superioar� (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "Resetare CAM"
 
diff --git a/po/ru_RU.po b/po/ru_RU.po
index e683b8b..a4eaca5 100644
--- a/po/ru_RU.po
+++ b/po/ru_RU.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2008-12-15 14:37+0100\n"
 "Last-Translator: Oleg Roitburd <oleg@roitburd.de>\n"
 "Language-Team: Russian <vdr@linuxtv.org>\n"
@@ -963,6 +963,13 @@ msgstr "������ ������� ���������� (���)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "������� ������� ���������� (���)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "CAM ����������"
 
diff --git a/po/sk_SK.po b/po/sk_SK.po
index 46edef5..176673f 100644
--- a/po/sk_SK.po
+++ b/po/sk_SK.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.7.16\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2011-02-15 16:29+0100\n"
 "Last-Translator: Milan Hrala <hrala.milan@gmail.com>\n"
 "Language-Team: Slovak <vdr@linuxtv.org>\n"
@@ -962,6 +962,13 @@ msgstr "Doln� frekvencia LNB (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Horn� frekvencia LNB (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "Resetnutie CAMu"
 
diff --git a/po/sl_SI.po b/po/sl_SI.po
index 89c6923..696e953 100644
--- a/po/sl_SI.po
+++ b/po/sl_SI.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2008-02-28 19:44+0100\n"
 "Last-Translator: Matjaz Thaler <matjaz.thaler@guest.arnes.si>\n"
 "Language-Team: Slovenian <vdr@linuxtv.org>\n"
@@ -963,6 +963,13 @@ msgstr "Spodnja LNB-frek. (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Zgornja LNB-frek. (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "Reset CAM-a"
 
diff --git a/po/sr_SR.po b/po/sr_SR.po
index 45d354b..62c07d3 100644
--- a/po/sr_SR.po
+++ b/po/sr_SR.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.7.1\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2011-01-09 15:57+0100\n"
 "Last-Translator: Milan Cvijanovi� <elcom_cvijo@hotmail.com>\n"
 "Language-Team: Serbian <vdr@linuxtv.org>\n"
@@ -981,6 +981,13 @@ msgstr "Donja LNB frekv. (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Gornja LNB frekv. (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "Ponovno pokreni CAM"
 
diff --git a/po/sv_SE.po b/po/sv_SE.po
index 150f95e..ae6d72f 100644
--- a/po/sv_SE.po
+++ b/po/sv_SE.po
@@ -10,7 +10,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2008-03-12 18:25+0100\n"
 "Last-Translator: Magnus Andersson <svankan@bahnhof.se>\n"
 "Language-Team: Swedish <vdr@linuxtv.org>\n"
@@ -965,6 +965,13 @@ msgstr "Undre LNB frekvens (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "�vre LNB frekvens (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "CAM omstart"
 
diff --git a/po/tr_TR.po b/po/tr_TR.po
index 194943b..946ab42 100644
--- a/po/tr_TR.po
+++ b/po/tr_TR.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2008-02-28 00:33+0100\n"
 "Last-Translator: Oktay Yolge�en <oktay_73@yahoo.de>\n"
 "Language-Team: Turkish <vdr@linuxtv.org>\n"
@@ -962,6 +962,13 @@ msgstr "Alt LNB frekans� (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "�st LNB frekans� (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "CAM s�f�rland�"
 
diff --git a/po/uk_UA.po b/po/uk_UA.po
index 433ec70..c383af8 100644
--- a/po/uk_UA.po
+++ b/po/uk_UA.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.7.7\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2010-04-25 16:35+0200\n"
 "Last-Translator: Yarema aka Knedlyk <yupadmin@gmail.com>\n"
 "Language-Team: Ukrainian <vdr@linuxtv.org>\n"
@@ -962,6 +962,13 @@ msgstr "Нижня частота конвертера (МГц)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "Верхня частота конвертера (МГц)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "Перезавантаження CAM"
 
diff --git a/po/zh_CN.po b/po/zh_CN.po
index c28fe88..43a5ea5 100644
--- a/po/zh_CN.po
+++ b/po/zh_CN.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: VDR 1.6.0\n"
 "Report-Msgid-Bugs-To: <vdr-bugs@tvdr.de>\n"
-"POT-Creation-Date: 2011-08-27 11:54+0200\n"
+"POT-Creation-Date: 2011-12-03 16:25+0100\n"
 "PO-Revision-Date: 2009-09-23 23:50+0800\n"
 "Last-Translator: Nan Feng <nfgx@21cn.com>\n"
 "Language-Team: Chinese (simplified) <vdr@linuxtv.org>\n"
@@ -965,6 +965,13 @@ msgstr "低本振频率 (MHz)"
 msgid "Setup.LNB$High LNB frequency (MHz)"
 msgstr "高本振频率 (MHz)"
 
+#, c-format
+msgid "Setup.LNB$Device %d connected to sat cable"
+msgstr ""
+
+msgid "Setup.LNB$own"
+msgstr ""
+
 msgid "CAM reset"
 msgstr "CAM重置"