Version 1.7.38

VDR developer version 1.7.38 is now available at

       ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.38.tar.bz2

A 'diff' against the previous version is available at

       ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.37-1.7.38.diff

MD5 checksums:

f4ef0f60ed662f3c983a830da67df9b2  vdr-1.7.38.tar.bz2
e945b0f44e13ed768de726cf6e66317c  vdr-1.7.37-1.7.38.diff

WARNING:
========

This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.

Approaching version 2.0.0:
==========================

If all goes well, there should be no more functional or API changes
before the final version 2.0.0. There will just be a few more fixes.

From the HISTORY file:
- Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Updated the French OSD texts (thanks to Marc Perrudin, Bernard Jaulini and Peter
  Münster).
- Updated the Macedonian OSD texts (thanks to Dimitar Petrovski).
- Fixed moving editing marks, so that they don't get overwritten with old values
  through an update of the marks file.
- Removed an invalid line from channels.conf.terr (reported by Lars Hanisch).
- Fixed an unexpected k_Repeat key event after a k_Release in lirc.c.
- Fixed permissions of po/sr_SR.po (reported by Dominic Evans).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Fixed using "Pause" and "Slow motion" near the end of a recording (replay stopped
  a few seconds after the end of the recording file has been reached).
- Fixed selecting the last replayed recording in the Recordings menu in case there
  are folders and plain recordings with names that differ only in non-alphanumeric
  characters (reported by Andre Weidemann).
- Fixed the description of the OSD drawing functions DrawEllipse() (the values -5...-8
  for the Quadrants parameter are not implemented).
- Made cOsd::DestroyPixmap() "NULL proof".
- Now deleting any previously allocated pixmaps in cOsd::SetAreas().
- Added demos of the DrawEllipse() and DrawSlope() function to the 'osddemo'
  plugin (press '1' or '2', respectively).
- Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras).
- The timeout for trying to switch to a valid programme is now reset immediately once
  a programme has been found.
- No longer checking for EOPNOTSUPP in cDvbTuner::GetSignalQuality() to avoid breaking
  this function in case the driver suddenly decides to return a different errno value
  if an operation is not supported.
- Moved the definition of TIMERMACRO_TITLE and TIMERMACRO_EPISODE from recording.h to
  config.h and using them to initialize Setup.NameInstantRecord (avoids having the same
  information in two places).
- Fixed the return value of cOsdProvider::StoreImage() in case there is no OSD provider.
- Fixed a crash in cMenuEditChanItem::Set() when entering a channel number that
  doesn't exist (reported by Mikael Hübsch).
- Fixed displaying pending timers in "alert" mode in the LCARS skin.
- Added missing $(LDFLAGS) to the Makefile of the dvbhddevice plugin (thanks to Ville
  Skyttä).
- Fixed some spellings in PLUGINS.html and Doxyfile (thanks to Ville Skyttä).
- Added '-p' to the cp command in the install-conf target of the Makefile (thanks to
  Ville Skyttä).
- Added missing 'const' to cDevice::HasProgramme() and cDevice::HasLock().
- Fixed determining the priority of the primary device in case it is neither replaying
  nor receiving a live channel (thanks to Matthias Senzel for reporting a problem with
  switching back to live viewing after replay in a setup with device bonding).
- Removed all \return and \param tags from comment lines marked with "///<" for Doxygen.
  There was only a rather small number of these, and I would probably always forget to
  put them in place when writing future comments, so I decided to drop them entirely.
- Added Doxyfile.filter to have special characters escaped that would otherwise be
  dropped by Doxygen (reported by Ville Skyttä).
- Using 'cat' instead of 'cp' to copy the Doxyfile to avoid problems in case Doxyfile
  is write protected.
- Updated the Doxyfile with a newer version of Doxygen.
- Turned off following symlinks in the Doxyfile.
- Removed trailing whitespace.
- Expanded tabs in PLUGINS/src/dvbhddevice/setup.c.
- Some formatting fixes.

1 files changed, 16 insertions, 12 deletions

diff --git a/vdr.c b/vdr.c
index 8bb208b..6287238 100644
--- a/vdr.c
+++ b/vdr.c
@@ -22,7 +22,7 @@
  *
  * The project's page is at http://www.tvdr.de
  *
- * $Id: vdr.c 2.48 2013/02/08 10:47:02 kls Exp $
+ * $Id: vdr.c 2.49 2013/02/14 10:49:06 kls Exp $
  */
 
 #include <getopt.h>
@@ -834,22 +834,26 @@ int main(int argc, char *argv[])
         time_t Now = time(NULL);
 
         // Make sure we have a visible programme in case device usage has changed:
-        if (!EITScanner.Active() && cDevice::PrimaryDevice()->HasDecoder() && !cDevice::PrimaryDevice()->HasProgramme()) {
+        if (!EITScanner.Active() && cDevice::PrimaryDevice()->HasDecoder()) {
            static time_t lastTime = 0;
-           if (!CamMenuActive() && Now - lastTime > MINCHANNELWAIT) { // !CamMenuActive() to avoid interfering with the CAM if a CAM menu is open
-              cChannel *Channel = Channels.GetByNumber(cDevice::CurrentChannel());
-              if (Channel && (Channel->Vpid() || Channel->Apid(0) || Channel->Dpid(0))) {
-                 if (cDevice::GetDeviceForTransponder(Channel, LIVEPRIORITY) && Channels.SwitchTo(Channel->Number())) // try to switch to the original channel...
-                    ;
-                 else if (LastTimerChannel > 0) {
-                    Channel = Channels.GetByNumber(LastTimerChannel);
-                    if (Channel && cDevice::GetDeviceForTransponder(Channel, LIVEPRIORITY) && Channels.SwitchTo(LastTimerChannel)) // ...or the one used by the last timer
+           if (!cDevice::PrimaryDevice()->HasProgramme()) {
+              if (!CamMenuActive() && Now - lastTime > MINCHANNELWAIT) { // !CamMenuActive() to avoid interfering with the CAM if a CAM menu is open
+                 cChannel *Channel = Channels.GetByNumber(cDevice::CurrentChannel());
+                 if (Channel && (Channel->Vpid() || Channel->Apid(0) || Channel->Dpid(0))) {
+                    if (cDevice::GetDeviceForTransponder(Channel, LIVEPRIORITY) && Channels.SwitchTo(Channel->Number())) // try to switch to the original channel...
                        ;
+                    else if (LastTimerChannel > 0) {
+                       Channel = Channels.GetByNumber(LastTimerChannel);
+                       if (Channel && cDevice::GetDeviceForTransponder(Channel, LIVEPRIORITY) && Channels.SwitchTo(LastTimerChannel)) // ...or the one used by the last timer
+                          ;
+                       }
                     }
+                 lastTime = Now; // don't do this too often
+                 LastTimerChannel = -1;
                  }
-              lastTime = Now; // don't do this too often
-              LastTimerChannel = -1;
               }
+           else
+              lastTime = 0; // makes sure we immediately try again next time
            }
         // Update the OSD size:
         {