| Age | Commit message (Collapse) | Author |
|---|
|
Original announce message:
VDR developer version 1.7.21 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.20-1.7.21.diff
MD5 checksums:
7300bfd997db1a848bd774fefe4aec80 vdr-1.7.21.tar.bz2
c4e745939f31543dd607b97d58fc86be vdr-1.7.20-1.7.21.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
This version contains functions to determine the "signal strength"
and "signal quality" through cDevice. If you are using a DVB card that
contains an stb0899 frontend chip (like the TT-budget S2-3200) you may
want to apply the patches from
ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches
to the LinuxDVB driver source in order to receive useful results from
that frontend.
From the HISTORY file:
- Fixed detecting frames for channels that split frames into several payloads
(reported by Derek Kelly).
- Now initializing Setup.InitialChannel to an empty string to avoid problems in
case there is no setup.conf.
- The start time of an edited recording is now set to the time of the first
editing mark (thanks to Udo Richter).
This obsoletes the CUTTIME patch.
- Direct access to the members start, priority, lifetime, and deleted of cRecording
as well as to position and comment of cMark is now deprecated. Plugin authors
should switch to the new access functions for these members. For now the macro
__RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS is defined in recording.h, which
exposes these members, so that existing plugins will still compile. Comment out
this #define to check whether a particular plugin needs to be modified.
This #define may be removed in a future version.
- The new functions cRecording::NumFrames() and cRecording::LengthInSeconds() return
the number of frames and length (in seconds) of a recording (suggested by Steffen
Barszus).
- The subtitle PIDs are now stored in the channels.conf file as an extension to the
TPID field (thanks to Rolf Ahrenberg).
- The new function cDevice::ProvidesEIT() is used to determine whether a device can
provide EIT data and will thus be used in cEITScanner::Process() to receive EIT
data from the channels it can receive (suggested by Rolf Ahrenberg). Note that by
default it is assumed that a device can't provide EIT data, and only the builtin
cDvbDevice returns true from this function.
- The Audio and Subtitles options are now available through the Green and Yellow
keys in the Setup/DVB menu (thanks to Rolf Ahrenberg). This is mainly for remote
controls that don't have dedicated keys for these functions.
- The SVDRP command HITK now accepts multiple keys (up to 31).
- The Recordings menu now displays the length (in hours:minutes) of each recording
(thanks to Rolf Ahrenberg). Note that the "new" indicator has been moved from the
recording time to the length column. This new format is also used by the SVDRP
command LSTR, so in case you have an application that parses the LSTR output,
you will need to adjust it to the new format.
- The dvbsddevice plugin now supports the new option --outputonly, which disables
receiving on SD FF devices and uses the device only for output (thanks to Udo
Richter).
- Fixed detecting frames on radio channels (reported by Chris Mayo).
- Revoked the changes to cFrameDetector that have been introduced in version 1.7.19.
Detecting frames in case the Picture Start Code or Access Unit Delimiter
extends over TS packet boundaries is now done by locally skipping TS packets
in cFrameDetector.
|
|
Original announce message:
VDR developer version 1.7.19 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.19.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.18-1.7.19.diff
MD5 checksums:
1eb04ecdc2b11ab8641ebfaa2cb93f42 vdr-1.7.19.tar.bz2
db16ce7bb51e0db837ed56ef4744a67e vdr-1.7.18-1.7.19.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
This version introduces functions to determine the "signal strength"
and "signal quality" through cDevice. If you are using a DVB card that
contains an stb0899 frontend chip (like the TT-budget S2-3200) you may
want to apply the patches from
ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches
to the LinuxDVB driver source in order to receive useful results from
that frontend.
Since apparently the various frontend drivers return different maximum
values in their FE_READ_SIGNAL_STRENGTH and FE_READ_SNR functions (some
deliver a value in the range 0x0000...0xFFFF, while others return values
as "dB/10" or "dBm/10" (the latter with an offset to make the value positive,
since the parameter is unsigned), the functions cDvbTuner::GetSignalStrength()
and cDvbTuner::GetSignalQuality() use the device's "subsystem ID" to
map these values into the range 0...100, which is the normalized return
value of these functions.
Take a look at these two functions and maybe remove the comment characters
from the lines
//#define DEBUG_SIGNALSTRENGTH
//#define DEBUG_SIGNALQUALITY
in dvbdevice.c to get some debug output if your device doesn't return any
directly useful values and may have to be added appropriately to the
'switch (subsystemId)' statement.
The channel display of the 'sttng' skin uses these values to implement
a signal strength/quality display.
From the HISTORY file:
- Fixed cString's operator=(const char *String) in case the given string is the
same as the existing one (thanks to Dirk Leber).
- Avoiding a gcc 4.6 compiler error in the skincurses plugin (thanks to Tobias Grimm).
- TsGetPayload() now checks if there actually is a payload in the given TS packet
(reported by Dirk Leber).
- Now sorting the source file names in the call to xgettext, to make sure the results
are not dependent on the sequence of the files.
Plugin authors may want to change the line containing the xgettext call in their
Makefile accordingly by changing "$^" to "`ls $^`".
- The primary device is now only avoided for recording if it is an old SD full
featured card. This is done through the new function cDevice::AvoidRecording().
- Subtitle PIDs are now also decrypted (thanks to Reinhard Nissl).
- Fixed a possible race condition in cDiseqc::Execute() (reported by Marco Göbenich).
The return value of cDiseqcs::Get() is now const, so plugin authors may need to
adjust their code if they use this function.
- The new functions cDevice::SignalStrength() and cDevice::SignalQuality() can be
used to determine the signal strength and quality of a given device (thanks to
Rolf Ahrenberg for some input on how to use BER and UNC values to generate a
"quality" value).
- The 'sttng' skin now displays two colored bars at the bottom of the channel display,
indicating the strength (upper bar) and quality (lower bar) of the received signal.
The number to the left of these bars indicates the actual device the current
channel is being received with.
- Fixed detecting frames in case the Picture Start Code or Access Unit Delimiter
extends over TS packet boundaries (reported by Johan Andersson).
In order to fix this, the semantics of cFrameDetector had to be changed a little.
See cRecorder::Action() and cIndexFileGenerator::Action() on how to use the new
cFrameDetector::NewPayload() function.
- The frame detector now only starts collecting PTS values after it has seen the
first I-frame, otherwise it might get MaxPtsValues values and stop analyzing
even though the incoming data is still garbage (reported by Derek Kelly).
- The info file of a recording is now only overwritten with a new fps value if
that new value is not the default value (thanks to Derek Kelly for reporting a
problem with the fps value being overwritten in case a recording was interrupted
and resumed, and the fps value could not be determined after resuming recording).
- The initial channel is now stored by the channel ID in the setup.conf file, in
order to avoid problems in case channels are reordered or deleted (reported by
Lars Bläser).
- Added support for "content identifier descriptor" and "default authority descriptor"
to 'libsi' (thanks to Dave Pickles).
|
|
- Fixed resetting the file size when regenerating the index file.
- The new function cDevice::PatPmtParser() can be used in derived devices to access
the PAT/PMT of the currently replayed material.
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- The PCR pid in generated PMTs is now set to 0x1FFF ("no PCR pid") in
cPatPmtGenerator::GeneratePmt(), because VDR doesn't record the PCR pid.
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- The 'sky' plugin is no longer part of the VDR source.
- Improved SPU handling on devices with limited OSD capabilities (thanks to
Matthieu Castet).
- Several code modifications to avoid compiler warnings (thanks to Winfried Köhler).
- Added stream type 11172 AUDIO to cPatPmtParser::ParsePmt() (thanks to Johann
Friedrichs).
- Removed debug output of '-' from cTransfer::Receive().
- Added defines for large files to the 'newplugin' script (reported by Udo Richter).
- Removed the workaround for short channel names of "Kabel Deutschland", because
apparently they now have their data according to the DVB standard (thanks to
Johann Friedrichs).
- Some fixes to dvbspu.[hc] (thanks to Johann Friedrichs).
- Fixed a busy loop when moving editing marks (thanks to Johann Friedrichs).
- Updated sources.conf (thanks to Derek Kelly).
- Modified cCharSetConv so that it can be used to convert from "whatever VDR uses"
to a given code (thanks to Joachim Wilke).
- Channel names containing commas are now handled correctly in channels.conf.
If a channel's short name contains a comma, it is replaced with a '.'.
- cDevice now logs the device number when a new device is created.
- Fixed handling STREAMTYPE_11172_AUDIO in cPatPmtParser::ParsePmt().
- cParsePatPmt now has functions to retrieve the audio, dolby and subtitle pids.
- cPatFilter::Process() now only stores CA descriptors for video and audio pids
(thanks to Francesco Saverio Schiavarelli for reporting a problem with channels
that have some encrypted components that VDR doesn't use).
- cDevice::AddPid() now stores the stream type of the given pid (thanks to Andreas
Regel).
- Added cFont::FontName() and cFont::Size() (thanks to Andreas Regel).
- cPatPmtParser now also stores the audio stream types.
- The support for full featured DVB cards of the TT/FuSi design has been moved
into the new plugin 'dvbsddevice'. On systems that use such a card as their
primary device, this plugin now needs to be loaded when running VDR in order
to view live or recorded video. If the plugin is not loaded, the card will
be treated like a budget DVB card, and there will be no OSD or viewing
capability.
- Fixed handling the "CA PMT" generation (revised a change not mentioned in version
1.7.9's changes, which caused a malfunction with Conax and Viaccess CAMs).
- Fixed stopping subtitle display when switching the primary device (thanks to
Anssi Hannula).
IMPORTANT NOTE TO PLUGIN AUTHORS: a plugin that implements a derived cDevice
class that can replay video must now call the MakePrimaryDevice() function of
its base class.
- Fixed compiler warnings "format not a string literal and no format arguments"
in some syslog calls (thanks to Rolf Ahrenberg).
- The new command line options --edit and --genindex can be used to edit a
recording or generate its index without actually starting the entire VDR
(based on a patch from Helmut Auer).
- Improved the description of the transponder parameters in vdr.5 (thanks to
Winfried Köhler).
- Avoiding setting the video stream type to 2 if the vpid is 0 (problem reported
by Arthur Konovalov).
- Implemented handling the "Content Descriptor" (based on a patch from Rolf
Ahrenberg). The 'classic', 'sttng' and 'curses' skins display the textual
representation of the content descriptors as "genre". The epg.data file stores
the genre using the tag character 'G'.
- Implemented handling the "Parental Rating Descriptor" (based on a patch from Rolf
Ahrenberg). The 'classic', 'sttng' and 'curses' skins display the parental
rating (if given) in their event displays. The epg.data file stores
the parental rating using the tag character 'R'.
IMPORTANT NOTE: if VDR doesn't display a parental rating, this does not
necessarily mean that the given programme is suitable for all audiences!
- Rearranged cEvent members to minimize memory waste.
- After a CLRE command, no further EPG processing is now done for 10 seconds,
so that data sent with subsequent PUTE commands doesn't interfere with data
from the broadcasters (suggested by Helmut Auer).
- Added support for DVB cards with multiple fontends. Note that this only
works for DVB cards where each frontend can be used independently of all
the others on the same adapter.
- Fixed plugin arguments corruption with glibc 2.11 on x86_64 (thanks to
Anssi Hannula).
|
