| Age | Commit message (Collapse) | Author |
|---|
|
VDR developer version 1.7.33 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.33.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.32-1.7.33.diff
MD5 checksums:
7c21451360ac7959d0d95e533d34451c vdr-1.7.33.tar.bz2
c79257198f8569bc02f43dc470ee3076 vdr-1.7.32-1.7.33.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
IMPORTANT:
==========
This version of VDR no longer sets LC_NUMERIC to "C" in order to make
sure any floating point numbers written to configuration files use a
proper decimal point. It rather explicitly converts such numbers using the
new functions atod() and dtoa().
IF YOU USE PLUGINS THAT STORE FLOATING POINT NUMBERS IN THEIR OWN CONFIGURATION
FILES, YOU SHOULD SET
export LC_NUMERIC=C
BEFORE RUNNING VDR, UNTIL THESE PLUGINS HAVE BEEN PROPERLY UPDATED.
From the HISTORY file:
- In order to be able to play TS recordings from other sources, in which there is
more than one PMT PID in the PAT, 'int cPatPmtParser::PatPmt(void)' has been changed
to 'bool cPatPmtParser::IsPatPmt(int Pid)'.
- Fixed learning remote control keys with the LCARS skin.
- Updated the Macedonian OSD texts (thanks to Dimitar Petrovski).
- Fixed getting only non-video packets in cCuttingThread::GetPendingPackets() (reported
by Sören Moch).
- Changed all occurrences of MPEG4 to H264 (pointed out by Sören Moch).
- Fixed getting the number of editing sequences in case the last sequence has no actual
end mark.
- The cutter now only increments the TS continuity counter for packets that have a
payload (pointed out by Sören Moch).
- Fixed adjusting the DTS values in the cutter, to compensate for dropped B-frames
(pointed out by Sören Moch).
- Fixed a typo in skins.h (thanks to Lars Hanisch).
- Simplified calculating the PTS offset in cPtsFixer::Fix() and fixed the overflow
handling of PCR values (thanks to Sören Moch).
- Fixed calling iconv_close() only with a valid iconv_t value (thanks to Juergen Lock).
- Fixed faulty opening of the Recordings menu when pressing the Play key during normal
live viewing mode in case there is a "last viewed" recording.
- Fixed some #include statements in plugins to use <vdr/...> instead of "vdr/..."
(thanks to Lars Hanisch).
- Fixed some spellings in osd.h and svdrp.c (thanks to Ville Skyttä).
- Fixed handling lowercase polarization characters in channel definitions if no DiSEqC
is used (reported by Mike Hay, actual bug pointed out by Stefan Huelswitt).
- Synchronizing system time to the transponder time is now done using adjtime() in order
to avoid discontinuities (suggested by Manuel Reimer). If the time difference is more
than 10 seconds, stime() is still used to do the initial sync.
- The '7' and '9' keys now jump to the very beginning or end, respectively, of the
recording, even if there is no mark set at that point (following a request from
Andre Weidemann).
- Now always setting the TDT EIT filter, because otherwise when turning on using the
transponder time in the Setup menu, it would only be used after the next restart
of VDR (thanks to Sundararaj Reel).
- The new functions cDevice::CanScaleVideo() and cDevice::ScaleVideo() can be used by
derived output devices to implement scaling the video to a given size and location
(based on a suggestion by Lucian Muresan).
- The SVDRP command HITK now discards any keys if the remote control is currently
turned off (thanks to Alexander Hans).
- The new remote control key "Play/Pause" can be used with remote controls that don't
have separate keys for "Play" and "Pause", but rather have a single key for both
functions (thanks to Stefan Hofmann for suggesting to implement support for such
remote controls).
- The new option "Setup/Replay/Pause on mark set" can be used to activate automatically
going into Pause mode if an editing mark is set during replay (suggested by Andre
Weidemann).
- When regenerating the index of a recording, the frame rate stored in the info file
is now automatically fixed if it differs from the value detected by the frame
detector.
- Fixed creating the edited version directory if a relative file name is given in
the call to 'vdr --edit' (the '/video' part was stripped from the given file name
even if it wasn't there).
- The new option "Setup/Replay/Progress display time" can be used to activate
automatically displaying the progress display whenever replay of a recording is
started (suggested by Stefan Blochberger).
- Changed reading and writing of floating point numbers into configuration files to
make it independent of the decimal point used in the current locale. All calls to
atof() have been replaced with the new function atod(), which makes sure the string
representation of a floating point number using a '.' as decimal point will be
handled correctly, even if the locale in use expects a ',' as the decimal point.
Plugins that read floating point numbers from their own configuration files will
also need to use atod() for this, or use a method of their own (this is not necessary
if values are stored in VDR's setup.conf file, because VDR takes care of this).
The reason for these changes is that floating point numbers presented to the user
shall be displayed in the way defined by the current locale (suggested by Stefan
Blochberger).
If you use plugins that store floating point values in configuration files of their
own and have not yet been adapted to this change, you should set
export LC_NUMERIC=C
before running VDR. Otherwise your plugin's configuration data may not be read or
written correctly.
- The new functions SetItemEvent(), SetItemTimer(), SetItemChannel() and
SetItemRecording() of the cSkinDisplayMenu class can be reimplemented by skin
plugins to display these items in a more elaborate way than just a simple line of
text.
|
|
Original announce message:
VDR developer version 1.7.27 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.27.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.26-1.7.27.diff
MD5 checksums:
bfeaa79a9e55144bca2b69139c45f1bb vdr-1.7.27.tar.bz2
b23344be51d3e2c2d96cc2dd4e8e564e vdr-1.7.26-1.7.27.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Changed the Green button in the "Edit timer" menu from "Once" to "Single"
(suggested by Rolf Ahrenberg).
- Fixed some typos in HISTORY and CONTRIBUTORS (thanks to Ville Skyttä).
- The channel name column in the "What's on now/next" menu now adjusts its width
to display the full short name of each channel (suggested by Dominic Evans).
- Dropped the meanwhile obsolete script 'i18n-to-gettext'.
- Removed the obsolete function cPlugin::RegisterI18n().
- Removed the obsolete typedef tI18nPhrase.
- Adapted menu column widths of 'skincurses' to the wider HD OSD sizes.
- Deactivated definition of __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS (recording.h)
and LEGACY_CRECEIVER (receiver.h) to trigger an error for any plugin that still
uses the respective code. You can reactivate these to quickly make your plugin
compile again, but beware that these code parts will be removed in one of the next
versions.
- Made the "overloaded-virtual" warning an error to detect hidden overloaded
virtual functions (thanks to Anssi Hannula for pointing out -Werror=...).
Plugin authors may want to change -Woverloaded-virtual to -Werror=overloaded-virtual
in their Makefiles.
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Improved fast forwarding to the end of a timeshift recording.
- The new function cDevice::DeviceName() returns a string identifying the name of
the given device.
- When toggling a timer between "Single" and "Repeating", the previous setting is now
retained in case the user toggles back to the original value.
- When estimating the remaining disk space (in hours), the average data rate of all
existing recordings is now taken into account. If this value can't be determined,
the previous value of 25.75 MB/min is taken.
- No longer using GetFont() (which is not thread safe) in the 'osddemo' plugin.
- No longer using GetFont() (which is not thread safe) in cSubtitleRegion::UpdateTextData().
- Fixed a memory leak in cSubtitleRegion::UpdateTextData().
- Moved setting LC_NUMERIC further up to make sure any floating point numbers use a
decimal point (suggested by Tobias Grimm).
- Added missing channel locking to cEIT.
- Fixed reduced bpp support for DVB subtitles (thanks to Rolf Ahrenberg).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Reverted some improvements to Make.config.template (thanks to Christian Ruppert).
- Fixed handling IDLEPRIORITY in cDvbDevice::ProvidesChannel() (thanks to Frank
Schmirler).
|
|
Original announce message:
VDR developer version 1.7.26 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.26.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.25-1.7.26.diff
MD5 checksums:
eb57398e44935ecb0bfc532bdfead312 vdr-1.7.26.tar.bz2
62e0f39e2c53ec2b5abd3ebb0e00ce3d vdr-1.7.25-1.7.26.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- Now checking for NULL in cOsd::AddPixmap() (suggested by Christoph Haubrich).
- Fixed the German translation of "VDR will shut down in %s minutes" (thanks to
Frank Neumann).
- The replay progress display is now turned on whenever a mark is toggled (not
only when one is set).
- Toggling a mark now restarts the timeout of the replay progress display.
- Fixed a possible race condition with the SVDRP commands CLRE and PUTE, where
EPG data from the transponder could be handled even though it shouldn't be
handled for 10 seconds.
- Added some missing member initializations in cBitmap.
- Improved displaying the play mode in the ST:TNG skin.
- Made the ST:TNG skin the default in case the user selected skin is not available.
- Improved displaying signal strength and quality in the ST:TNG skin's channel
display.
- Fixed switching devices to the transponders of VPS recordings in case there
are only bonded devices. The cDevice's "avoid device" mechanism has been replaced
by using "occupied".
- Fixed selecting devices for the EPG scan in case the primary device is bonded
with an other one.
- Removed the calls to EITScanner.UsesDevice(this) from dvb[hs]ddevice.c, because
the code following these calls is only executed if LiveView is true, which is
never the case when the EITScanner switches to a channel.
- Removed the obsolete function cEITScanner::UsesDevice(). If a plugin has used this
function to find out whether a call to its cStatus::ChannelSwitch() function was
due to a live channel switch, it can use that function's new parameter LiveView.
Any plugins that implement cStatus::ChannelSwitch() need to add the parameter
'bool LiveView' to that function.
- Fixed parsing channel data in case the audio pid is 0. On channels that only
broadcast Dolby Digital audio there were sometimes log entries like
"changing pids of channel ... from ... to ..." with no apparent difference
between the old and new set of pids.
- Fixed checking pids in case a channel has only Dolby Digital audio.
- The Green button in the "Edit timer" menu can now be used to toggle between single
shot and repeating timers. This is the same as pressing '0' when the "Day" field
is selected, but it works at any time (and is more obvious).
- Revoked "If the first event in a schedule has a table id of 0x00, any incoming EIT data for
that schedule from the DVB stream will be completely ignored".
- Added a new plugin interface for implementing EPG handlers.
+ A plugin can implement an EPG handler by creating an object derived from
cEpgHandler and implementing the necessary member functions.
+ The special handling of events with table id 0x00 has been dropped.
For backwards compatibility EPG events with table ids lower than 0x4E will
be treated as if they had a table id of 0x4E, and the new plugin 'epgtableid0'
can be used to have them handled like in previous versions.
+ The default table id for a newly created cEvent has been changed to 0xFF,
which is higher than any normal table id that is broadcast in the EIT data.
See PLUGINS.html, section "Electronic Program Guide" for more information.
|
|
Original announce message:
VDR developer version 1.7.24 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.24.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23-1.7.24.diff
MD5 checksums:
a034c5e399417dfc583483f650d003ee vdr-1.7.24.tar.bz2
aa1a2b202da92e65945ff39470b26618 vdr-1.7.23-1.7.24.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Fixed a high load in case a transponder can't be received.
- Improved the way DVB_API_VERSION is checked.
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed asserting there is a live programme if the primary device is bonded with
a device that starts a recording on a different band.
- Fixed the return type of cMyDeviceHook::DeviceProvidesTransponder() in PLUGINS.html.
- Fixed a crash in a plugin using cDeviceHook when VDR ends (reported by Oliver Endriss).
- Some improvements to the Makefiles (thanks to Christian Ruppert).
- Fixed cRecording::LengthInSeconds(), which wrongfully rounded the result to full
minutes (thanks to Christoph Haubrich).
- Symbolic links are no longer resolved in cRecordings::ScanVideoDir() (thanks to
Sundararaj Reel).
- The epg.data file is now read in a separate thread to make the startup process
faster in case the file is very large (suggested by Helmut Auer).
- Fixed selecting the primary device for receiving the live viewing channel in
case it is bonded with an other device and has no receiver attached to it.
- Fixed a possible crash when canceling VDR while displaying subtitles, and the
primary device is no longer available.
- Improved handling subtitles of BBC channels.
- No longer using tabs as delimiter in the EPG bugfix log (they were garbled in the
log file).
- Added a missing '.' after the month in VPS strings.
- Added some missing 'const' to cDevice (thanks to Joachim Wilke).
- Fixed handling the PrimaryLimit when requesting a device for live viewing
(reported by Uwe Scheffler).
- Removed superfluous calls to SetVideoFormat() from device constructors. This
function is called in cDevice::SetPrimaryDevice(), anyway.
- An ongoing editing process is now canceled if either the original or the edited
version of the recording is deleted from the Recordings menu.
- The SVDRP command DELR now won't delete a recording that is currently being edited.
- Removed code stub for obsolete SVDRP command MOVT.
- The DVB device adapters/frontends are now probed by scanning the /dev/dvb directory
instead of looping through adapter/frontend numbers. This allows for "holes" in the
device numbering.
- cReadDir::Next() now skips directory entries "." and "..".
- Fixed a possible deadlock in time shift mode.
- Fixed switching into time shift mode when pausing live video (thanks to Reinhard
Nissl for helping to debug this one).
|
|
Original announce message:
VDR developer version 1.7.21 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.20-1.7.21.diff
MD5 checksums:
7300bfd997db1a848bd774fefe4aec80 vdr-1.7.21.tar.bz2
c4e745939f31543dd607b97d58fc86be vdr-1.7.20-1.7.21.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
This version contains functions to determine the "signal strength"
and "signal quality" through cDevice. If you are using a DVB card that
contains an stb0899 frontend chip (like the TT-budget S2-3200) you may
want to apply the patches from
ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches
to the LinuxDVB driver source in order to receive useful results from
that frontend.
From the HISTORY file:
- Fixed detecting frames for channels that split frames into several payloads
(reported by Derek Kelly).
- Now initializing Setup.InitialChannel to an empty string to avoid problems in
case there is no setup.conf.
- The start time of an edited recording is now set to the time of the first
editing mark (thanks to Udo Richter).
This obsoletes the CUTTIME patch.
- Direct access to the members start, priority, lifetime, and deleted of cRecording
as well as to position and comment of cMark is now deprecated. Plugin authors
should switch to the new access functions for these members. For now the macro
__RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS is defined in recording.h, which
exposes these members, so that existing plugins will still compile. Comment out
this #define to check whether a particular plugin needs to be modified.
This #define may be removed in a future version.
- The new functions cRecording::NumFrames() and cRecording::LengthInSeconds() return
the number of frames and length (in seconds) of a recording (suggested by Steffen
Barszus).
- The subtitle PIDs are now stored in the channels.conf file as an extension to the
TPID field (thanks to Rolf Ahrenberg).
- The new function cDevice::ProvidesEIT() is used to determine whether a device can
provide EIT data and will thus be used in cEITScanner::Process() to receive EIT
data from the channels it can receive (suggested by Rolf Ahrenberg). Note that by
default it is assumed that a device can't provide EIT data, and only the builtin
cDvbDevice returns true from this function.
- The Audio and Subtitles options are now available through the Green and Yellow
keys in the Setup/DVB menu (thanks to Rolf Ahrenberg). This is mainly for remote
controls that don't have dedicated keys for these functions.
- The SVDRP command HITK now accepts multiple keys (up to 31).
- The Recordings menu now displays the length (in hours:minutes) of each recording
(thanks to Rolf Ahrenberg). Note that the "new" indicator has been moved from the
recording time to the length column. This new format is also used by the SVDRP
command LSTR, so in case you have an application that parses the LSTR output,
you will need to adjust it to the new format.
- The dvbsddevice plugin now supports the new option --outputonly, which disables
receiving on SD FF devices and uses the device only for output (thanks to Udo
Richter).
- Fixed detecting frames on radio channels (reported by Chris Mayo).
- Revoked the changes to cFrameDetector that have been introduced in version 1.7.19.
Detecting frames in case the Picture Start Code or Access Unit Delimiter
extends over TS packet boundaries is now done by locally skipping TS packets
in cFrameDetector.
|
|
Original announce message:
VDR developer version 1.7.19 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.19.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.18-1.7.19.diff
MD5 checksums:
1eb04ecdc2b11ab8641ebfaa2cb93f42 vdr-1.7.19.tar.bz2
db16ce7bb51e0db837ed56ef4744a67e vdr-1.7.18-1.7.19.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
This version introduces functions to determine the "signal strength"
and "signal quality" through cDevice. If you are using a DVB card that
contains an stb0899 frontend chip (like the TT-budget S2-3200) you may
want to apply the patches from
ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches
to the LinuxDVB driver source in order to receive useful results from
that frontend.
Since apparently the various frontend drivers return different maximum
values in their FE_READ_SIGNAL_STRENGTH and FE_READ_SNR functions (some
deliver a value in the range 0x0000...0xFFFF, while others return values
as "dB/10" or "dBm/10" (the latter with an offset to make the value positive,
since the parameter is unsigned), the functions cDvbTuner::GetSignalStrength()
and cDvbTuner::GetSignalQuality() use the device's "subsystem ID" to
map these values into the range 0...100, which is the normalized return
value of these functions.
Take a look at these two functions and maybe remove the comment characters
from the lines
//#define DEBUG_SIGNALSTRENGTH
//#define DEBUG_SIGNALQUALITY
in dvbdevice.c to get some debug output if your device doesn't return any
directly useful values and may have to be added appropriately to the
'switch (subsystemId)' statement.
The channel display of the 'sttng' skin uses these values to implement
a signal strength/quality display.
From the HISTORY file:
- Fixed cString's operator=(const char *String) in case the given string is the
same as the existing one (thanks to Dirk Leber).
- Avoiding a gcc 4.6 compiler error in the skincurses plugin (thanks to Tobias Grimm).
- TsGetPayload() now checks if there actually is a payload in the given TS packet
(reported by Dirk Leber).
- Now sorting the source file names in the call to xgettext, to make sure the results
are not dependent on the sequence of the files.
Plugin authors may want to change the line containing the xgettext call in their
Makefile accordingly by changing "$^" to "`ls $^`".
- The primary device is now only avoided for recording if it is an old SD full
featured card. This is done through the new function cDevice::AvoidRecording().
- Subtitle PIDs are now also decrypted (thanks to Reinhard Nissl).
- Fixed a possible race condition in cDiseqc::Execute() (reported by Marco Göbenich).
The return value of cDiseqcs::Get() is now const, so plugin authors may need to
adjust their code if they use this function.
- The new functions cDevice::SignalStrength() and cDevice::SignalQuality() can be
used to determine the signal strength and quality of a given device (thanks to
Rolf Ahrenberg for some input on how to use BER and UNC values to generate a
"quality" value).
- The 'sttng' skin now displays two colored bars at the bottom of the channel display,
indicating the strength (upper bar) and quality (lower bar) of the received signal.
The number to the left of these bars indicates the actual device the current
channel is being received with.
- Fixed detecting frames in case the Picture Start Code or Access Unit Delimiter
extends over TS packet boundaries (reported by Johan Andersson).
In order to fix this, the semantics of cFrameDetector had to be changed a little.
See cRecorder::Action() and cIndexFileGenerator::Action() on how to use the new
cFrameDetector::NewPayload() function.
- The frame detector now only starts collecting PTS values after it has seen the
first I-frame, otherwise it might get MaxPtsValues values and stop analyzing
even though the incoming data is still garbage (reported by Derek Kelly).
- The info file of a recording is now only overwritten with a new fps value if
that new value is not the default value (thanks to Derek Kelly for reporting a
problem with the fps value being overwritten in case a recording was interrupted
and resumed, and the fps value could not be determined after resuming recording).
- The initial channel is now stored by the channel ID in the setup.conf file, in
order to avoid problems in case channels are reordered or deleted (reported by
Lars Bläser).
- Added support for "content identifier descriptor" and "default authority descriptor"
to 'libsi' (thanks to Dave Pickles).
|
|
- Changed -O2 to -O3 in Make.config.template (reported by Matti Lehtimäki).
- Added a missing 'default' case in cPixmapMemory::DrawEllipse().
- Fixed some direct comparisons of double values.
- Fixed detecting frames on channels that broadcast with separate "fields" instead
of complete frames.
- Made updating the editing marks during replay react faster in case the marks
file has just been written (with a patch from Udo Richter).
- Fixed horizontal scaling of subtitles (reported by Reinhard Nissl).
- Stripped the note "The data returned by this function is only used for informational
purposes (if any)" from the description of cDevice::GetVideoSize(). The VideoAspect
is now used to properly scale subtitles.
- Fixed cUnbufferedFile::Seek() in case it is compiled without USE_FADVISE (thanks
to Juergen Lock).
- Fixed the Language header of the Serbian translation file (thanks to Ville Skyttä).
- Added anti-aliasing when upscaling bitmaps, which improves the display of SD subtitles
when replayed on an HD OSD (thanks to Reinhard Nissl for his help in debugging).
- Renamed cBitmap::Scale() to Scaled(), because it doesn't modify the bitmap itself,
but rather returns a scaled copy.
- Fixed the description of cReceiver in PLUGINS.html, regarding detaching a receiver
from its device before deleting it (reported by Winfried Köhler). This change in
behavior was introduced in version 1.5.7.
- Fixed scaling subtitles in case the OSD size is exactly the same as the display
size of the subtitles.
- Added a missing initialization to sDvbSpuRect (reported by Sergiu Dotenco).
- Replaced "%lld" and "%llX" print format specifiers with "PRId64" and "PRIX64" to
avoid compiler warnings with gcc 4.5.2 (thanks to Sergiu Dotenco).
On a personal note: I find it a step in the totally wrong direction that there
have been macros introduced to work around this problem in the first place. There
should have been "real" format specifiers defined that address this. These macros
are nothing but an ugly workaround.
- Added Cancel(3) to ~cTrueColorDemo() in the "osddemo" plugin (thanks to Reinhard Nissl).
- Added a missing font deletion in cTrueColorDemo::Action() in the "osddemo" plugin
(thanks to Reinhard Nissl).
- Fixed a buffer overflow in cFont::Bidi() (thanks to Reinhard Nissl).
- Added HD stream content identifiers to vdr.5 (thanks to Christoph Haubrich).
- Made cRecordingInfo::Read(FILE *f) private to avoid calls to it from outside
cRecordingInfo or cRecording (reported by Mika Laitio).
- The dvbhddevice plugin is now part of the VDR distribution archive (thanks to
Andreas Regel).
- Removed an obsolete local variable in dvbsdffosd.c (thanks to Paul Menzel).
- Fixed a possible NULL pointer dereference in osddemo.c (reported by Paul Menzel).
- Now using pkg-config to get fribidi, freetype and fontconfig cflags and libs (thanks
to Ville Skyttä).
- The Makefile now also installs the include files (thanks to Ville Skyttä).
- Added handling of "ANSI/SCTE 57" descriptors (thanks too Rolf Ahrenberg).
- Avoiding an unecessary call to Recordings.ResetResume() (thanks to Reinhard
Nissl).
|
|
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Fixed following symbolic links in RemoveFileOrDir() (cont'd) (thanks to
Steffen Barszus).
- Changed the description of cDevice::GetSTC() to make it mandatory for devices
that can replay.
- Removed the check for positive STC values from cDvbSubtitleConverter::Action().
- Added cString::operator=(const char *String) (suggested by Antti Seppälä).
- Some spelling fixes (thanks to Ville Skyttä).
- Passing package name and version to xgettext (thanks to Ville Skyttä).
- Made 'dist' target dependent on up to date *.po (thanks to Ville Skyttä).
- Added Language and fixed Language-Team header of *.po (thanks to Ville Skyttä).
- Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras).
- Fixed detecting frames on channels that broadcast with 50 or 60 fps.
This avoids artifacts during fast forward/rewind when replaying recordings from such
channels. To fix the index of existing recordings from such channels, just delete the
'index' file of the recording and VDR will generate a new one the next time you play it.
You should also change the line "F 25" to "F 50" in the 'info' file of that recording.
- Added support for "registration descriptor" to 'libsi' and using it in pat.c (thanks
to Rolf Ahrenberg).
- Fixed unjustified log entries about changed channel pids (reported by Derek Kelly).
- Added an include of VDR's 'Make.global' to libsi's Makefile (thanks to Rolf
Ahrenberg).
- Removed displaying the "contents" information from the "Classic VDR" and
"ST:TNG Panels" skins, because it is often wrong and nothing but irritating.
- Added typecasts to avoid gcc 4.5 warnings in switch statements on eKeys
variables where additional 'k_...' flags are used.
- Fixed inclusion of <stdarg.h> (thanks to Henning Heinold).
- Changed "frame duration" to "frame rate" in vdr.5 (reported by Tobias Grimm).
- Removing a cRemote from the Remotes list in case its initialization failed (thanks
to Dominik Strasser).
- Added LDFLAGS to the linker calls in the Makefiles (thanks to Joerg Bornkessel and
Paul Menzel).
- Now updating the 'frames per second' data in the list of recordings when a new
recording is started that has a frame rate other than the default.
- The include path to the freetype2 header files is now retrieved via a call to
'pkg-config --cflags freetype2' (suggested by Andreas Oberritter).
- The OSD now has full TrueColor support. There can be several "pixmaps" that can
be overlayed with alpha blending. All existing skins should work out of the box
with the TrueColor OSD - the only exception being cOsd::GetBitmap(). Since the
TrueColor OSD doesn't use bitmaps, this function will return a dummy bitmap, which
may not be what the plugin expects. As long as this bitmap is only used for setting
the palette, there is no problem. However, any other operations on this bitmap will
have no effect. See the description of the cPixmap functions in osd.h for details
about the new functionalities.
The "ST:TNG Panels" skin has been enhanced to automatically use the TrueColor OSD
if available.
The "osddemo" plugin has been extended to show some of the possibilities of the
TrueColor OSD if it is run on a system that actually provides TrueColor support.
Thanks to Reinhard Nissl for some valuable input, help with debugging, and an
implementation of the AlphaBlend() function.
- Updated the Slovakian language texts (thanks to Milan Hrala).
- Added Serbian language texts (thanks to Milan Cvijanovic).
- Fixed reallocating memory in the "pictures" plugin (reported by Paul Menzel, with
input from Oliver Endriss).
- Fixed reallocating memory in cTsToPes::PutTs() (suggested by Oliver Endriss).
- Now checking the result of all realloc() calls.
- Fixed setting up the 'Recordings' menu in case there are several recordings
with exactly the same name (reported by Marcus Hilbrich).
- Setting the audio type of language descriptors to 0x00 in the PAT/PMT generator
(thanks to Anssi Hannula).
- Changed the compiler optimization flag to -O3, which gives quite a performance
boost in the AlphaBlend() function.
- While replaying, the editing marks are now updated every 10 seconds (based on a
patch from Manuel Reimer).
- Now reducing the thread and I/O priority cCuttingThread::Action() to make the
foreground process more responsive (suggested by Frank Neumann).
- Removed checking for minimum line length of 21 characters in the LIRC receiver code
(reported by Gerald Dachs).
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Now storing the original display size when handling DVB subtitles (thanks to
Reinhard Nissl).
- The original display size of subtitles is now used to scale them properly when
displaying them on an HD OSD.
|
|
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Added missing Dtypes for ATSC (thanks to Alex Lasnier).
- Updated the Portuguese language texts (thanks to Cristiano A. Silva).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed the array size of Atypes in cPatFilter::Process() (thanks to
Rolf Ahrenberg).
- Added locking to the cCutter functions to avoid a crash in case CutRecording()
is called from a plugin (reported by Andreas Mair).
- Fixed DDS detection for HD resolution subtitles (thanks to Reinhard Nissl).
- Fixed following symbolic links in RemoveFileOrDir().
- Added support for languages that are written right-to-left (based on a patch
from Osama Alrawab). See INSTALL for information on how to turn this on.
- Added Arabian language texts (thanks to Osama Alrawab).
|
|
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Changed the position of Sirius 4 to S4.8E in sources.conf (thanks to Alexander Gross).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Moved the declaration of cMenuCommands to menu.h, so that plugins can use it.
- Added a note to the MANUAL, saying that adding new transponders only works if the
"EPG scan" is active (suggested by Halim Sahim).
- Improved handling frames at the beginning and end of a recording in cDvbPlayer for
devices with large buffers (thanks to Reinhard Nissl).
- Implemented cDeviceHook to allow plugins more control over which device can
provide which transponder (thanks to Reinhard Nissl).
- Implemented cDevice::GetCurrentlyTunedTransponder() (thanks to Reinhard Nissl).
- Moved strictly necessary Makefile options into Make.global, which is included
by all plugins (thanks to Paul Menzel). The Makefiles of existing plugins should be
modified like this:
------------------------------------------------------------
--- PLUGINS/src/hello/Makefile 2009/10/18 14:00:07 2.1
+++ PLUGINS/src/hello/Makefile 2010/02/06 14:50:03 2.2
@@ -18,7 +18,7 @@
### The C++ compiler and options:
CXX ?= g++
-CXXFLAGS ?= -fPIC -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses
+CXXFLAGS ?= -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses
### The directory environment:
@@ -26,6 +26,10 @@
LIBDIR = ../../lib
TMPDIR = /tmp
+### Make sure that necessary options are included:
+
+include $(VDRDIR)/Make.global
+
### Allow user defined options to overwrite defaults:
-include $(VDRDIR)/Make.config
------------------------------------------------------------
- Added device definitions to the diseqc.conf file format, so that certain satellite
positions can be limited to a given list of devices.
This obsoletes the SOURCECAPS patch.
- Keeping subtitles visible when pausing replay (thanks to Rolf Ahrenberg).
- Fixed adding new transponders in case there is only a single channel in the
channel list (reported by Halim Sahin).
- The file name in the "Timers" menu now shows only the base name of the recording
without the folder path (if any). Otherwise with long folder paths the actual
recording name was not visible at all.
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Exported some libsi functions (thanks to Lucian Muresan).
- Improved scalability of the default skins.
- Fixed the German translation of "Folder name must not contain '%c'!" (thanks to
Frank Schmirler).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Plugins can now define new sources. In order to implement this, the following
changes were made:
+ The transponder parameter string is no longer interpreted by cChannel, but rather
stored as is and used only by the respective device. That way plugins can use a
channel's parameter string to store arbitrary data (see vdr.5).
+ The new class cSourceParam can be used by plugins to define new sources, and to
implement OSD items that will be used in the channel editor for editing the source
specific parameters of a channel (see dvbdevice.c for an example of how this is
done for the default DVB devices).
+ Purely numerical values are no longer accepted in the 'source' parameter of a
channel.
This obsoletes the PLUGINPARAM patch.
- Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras).
- cSafeFile::Close() now flushes the file (suggested by Stephan Austermühle).
- The option "Setup/DVB/Use Dolby Digital" now only controls whether Dolby Digital
tracks appear in the "Audio" menu. Dolby Digital is always recorded.
This obsoletes the DOLBYINREC patch.
|
|
- Changed the EVCONTENTMASK_* macros to enums and changed "mask" to "group".
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- The "Edit timer" menu can now set the folder for the recording from a list of
folders stored in "folders.conf".
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- If svdrphosts.conf contains only the address of the local host, the SVDRP port
is opened only for the local host (thanks to Manuel Reimer).
- Renamed 'runvdr' to 'runvdr.template' and no longer copying it to the BINDIR
in 'make install' (thanks to Martin Dauskardt).
- Added plain text error messages to log entries from cOsd::SetAreas() (suggested
by Rolf Ahrenberg).
- cPalette::ClosestColor() now treats fully transparent colors as "equal"; improved
cDvbSpuBitmap::getMinBpp() (thanks to Matthieu Castet and Johann Friedrichs).
- The new setup option "Miscellaneous/Channels wrap" controls whether the current
channel wraps around the beginning or end of the channel list when zapping (thanks
to Matti Lehtimäki).
- Fixed determining the frame duration on channels where the PTS deltas jitter by
+/-1 around 1800.
- The PCR pid in generated PMTs is now set to the channel's PCR pid again.
- Fixed determining the frame duration on channels where the PTS deltas jitter by
+/-1 around 3600.
- The PCR pid is now recorded for channels where this is different from the video
PID. To facilitate this, the interfaces of cTransfer, cTransferControl, cRecorder
and cReceiver have been modified, so that the PIDs are no longer given in separate
parameters, but rather the whole channel is handed down for processing. The old
constructor of cReceiver is still available, but it is recommended to plugin authors
that they switch to the new interface as soon as possible.
When replaying such a recording, the PCR packets are sent to PlayTsVideo()
- The files "commands.conf" and "reccmd.conf" can now contain nested lists of
commands. See vdr.5 for information about the new file format.
|
|
- Fixed resetting the file size when regenerating the index file.
- The new function cDevice::PatPmtParser() can be used in derived devices to access
the PAT/PMT of the currently replayed material.
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- The PCR pid in generated PMTs is now set to 0x1FFF ("no PCR pid") in
cPatPmtGenerator::GeneratePmt(), because VDR doesn't record the PCR pid.
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- The 'sky' plugin is no longer part of the VDR source.
- Improved SPU handling on devices with limited OSD capabilities (thanks to
Matthieu Castet).
- Several code modifications to avoid compiler warnings (thanks to Winfried Köhler).
- Added stream type 11172 AUDIO to cPatPmtParser::ParsePmt() (thanks to Johann
Friedrichs).
- Removed debug output of '-' from cTransfer::Receive().
- Added defines for large files to the 'newplugin' script (reported by Udo Richter).
- Removed the workaround for short channel names of "Kabel Deutschland", because
apparently they now have their data according to the DVB standard (thanks to
Johann Friedrichs).
- Some fixes to dvbspu.[hc] (thanks to Johann Friedrichs).
- Fixed a busy loop when moving editing marks (thanks to Johann Friedrichs).
- Updated sources.conf (thanks to Derek Kelly).
- Modified cCharSetConv so that it can be used to convert from "whatever VDR uses"
to a given code (thanks to Joachim Wilke).
- Channel names containing commas are now handled correctly in channels.conf.
If a channel's short name contains a comma, it is replaced with a '.'.
- cDevice now logs the device number when a new device is created.
- Fixed handling STREAMTYPE_11172_AUDIO in cPatPmtParser::ParsePmt().
- cParsePatPmt now has functions to retrieve the audio, dolby and subtitle pids.
- cPatFilter::Process() now only stores CA descriptors for video and audio pids
(thanks to Francesco Saverio Schiavarelli for reporting a problem with channels
that have some encrypted components that VDR doesn't use).
- cDevice::AddPid() now stores the stream type of the given pid (thanks to Andreas
Regel).
- Added cFont::FontName() and cFont::Size() (thanks to Andreas Regel).
- cPatPmtParser now also stores the audio stream types.
- The support for full featured DVB cards of the TT/FuSi design has been moved
into the new plugin 'dvbsddevice'. On systems that use such a card as their
primary device, this plugin now needs to be loaded when running VDR in order
to view live or recorded video. If the plugin is not loaded, the card will
be treated like a budget DVB card, and there will be no OSD or viewing
capability.
- Fixed handling the "CA PMT" generation (revised a change not mentioned in version
1.7.9's changes, which caused a malfunction with Conax and Viaccess CAMs).
- Fixed stopping subtitle display when switching the primary device (thanks to
Anssi Hannula).
IMPORTANT NOTE TO PLUGIN AUTHORS: a plugin that implements a derived cDevice
class that can replay video must now call the MakePrimaryDevice() function of
its base class.
- Fixed compiler warnings "format not a string literal and no format arguments"
in some syslog calls (thanks to Rolf Ahrenberg).
- The new command line options --edit and --genindex can be used to edit a
recording or generate its index without actually starting the entire VDR
(based on a patch from Helmut Auer).
- Improved the description of the transponder parameters in vdr.5 (thanks to
Winfried Köhler).
- Avoiding setting the video stream type to 2 if the vpid is 0 (problem reported
by Arthur Konovalov).
- Implemented handling the "Content Descriptor" (based on a patch from Rolf
Ahrenberg). The 'classic', 'sttng' and 'curses' skins display the textual
representation of the content descriptors as "genre". The epg.data file stores
the genre using the tag character 'G'.
- Implemented handling the "Parental Rating Descriptor" (based on a patch from Rolf
Ahrenberg). The 'classic', 'sttng' and 'curses' skins display the parental
rating (if given) in their event displays. The epg.data file stores
the parental rating using the tag character 'R'.
IMPORTANT NOTE: if VDR doesn't display a parental rating, this does not
necessarily mean that the given programme is suitable for all audiences!
- Rearranged cEvent members to minimize memory waste.
- After a CLRE command, no further EPG processing is now done for 10 seconds,
so that data sent with subsequent PUTE commands doesn't interfere with data
from the broadcasters (suggested by Helmut Auer).
- Added support for DVB cards with multiple fontends. Note that this only
works for DVB cards where each frontend can be used independently of all
the others on the same adapter.
- Fixed plugin arguments corruption with glibc 2.11 on x86_64 (thanks to
Anssi Hannula).
|
