| Age | Commit message (Collapse) | Author |
|---|
|
Original announce message:
VDR developer version 1.7.22 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21-1.7.22.diff
MD5 checksums:
b9c0fe1aac8e653c0d0234bc72c2bb2c vdr-1.7.22.tar.bz2
868bb332342c9a78beda17cc85e0bb93 vdr-1.7.21-1.7.22.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- Fixed scaling subtitles in case the primary device's GetVideoSize() function doesn't
return actual values (thanks to Luca Olivetti).
- The DiSEqC codes are now copied in the call to cDiseqc::Execute().
- VDR now supports "Satellite Channel Routing" (SCR) according to EN50494 (based on
the "unicable" patch from Lars Hanisch).
Since "Unicable" is a registered trademark and stands for only one of many
implementations of SCR, the following changes have been made compared to the patch,
which need to be taken into account by people who have set up their system using
the patch:
- The 'U' parameter in the diseqc.conf file has been changed to 'S' ("Scr").
- The configuration file name has been changed from "unicable.conf" to "scr.conf".
- Updated sources.conf (thanks to Arthur Konovalov).
- The SVDRP command LSTC now also accepts channel IDs (thanks to Dominic Evans).
- Fixed handling DVB subtitles and implemented decoding textual DVB subtitles (thanks
to Rolf Ahrenberg).
- Added cap_net_raw to the capabilities that are not dropped (thanks to Dominic Evans).
- Fixed setting the start time of an edited recording (thanks to Christoph Haubrich).
- Temporarily switching free devices to transponders in order to have their running
status updated is now done by marking the devices as "occupied" for a certain
amount of time.
- The new setup options "LNB/Device n connected to sat cable" can be used to define
which DVB-S devices are connected to the same sat cable and are therefore "bonded".
This obsoletes the LNBSHARE patch. Users of the LNBSHARE patch will need to newly
set up their sat devices with the above options.
- Fixed a crash when deleting a recording while cutting it (thanks to Ville Skyttä).
- Fixed several spelling errors (thanks to Ville Skyttä).
- The new SVDRP command UPDR can be used to trigger an update of the list of
recordings (thanks to Lars Hanisch).
- Added generating a pkg-config file to the Makefile (thanks to Ville Skyttä).
- Removed the '.pl' suffix from all scripts (thanks to Ville Skyttä).
- Changed the default location for the LIRC socket to /var/run/lirc/lircd (thanks
to Ville Skyttä).
- Added file name and line number to LOG_ERROR_STR() (thanks to Rolf Ahrenberg).
- Replaced all calls to sleep() with cCondWait::SleepMs() (thanks to Rolf Ahrenberg).
- Fixed a crash with malformed SI data (patch from vdr-portal).
|
|
Original announce message:
VDR developer version 1.7.19 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.19.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.18-1.7.19.diff
MD5 checksums:
1eb04ecdc2b11ab8641ebfaa2cb93f42 vdr-1.7.19.tar.bz2
db16ce7bb51e0db837ed56ef4744a67e vdr-1.7.18-1.7.19.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
This version introduces functions to determine the "signal strength"
and "signal quality" through cDevice. If you are using a DVB card that
contains an stb0899 frontend chip (like the TT-budget S2-3200) you may
want to apply the patches from
ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches
to the LinuxDVB driver source in order to receive useful results from
that frontend.
Since apparently the various frontend drivers return different maximum
values in their FE_READ_SIGNAL_STRENGTH and FE_READ_SNR functions (some
deliver a value in the range 0x0000...0xFFFF, while others return values
as "dB/10" or "dBm/10" (the latter with an offset to make the value positive,
since the parameter is unsigned), the functions cDvbTuner::GetSignalStrength()
and cDvbTuner::GetSignalQuality() use the device's "subsystem ID" to
map these values into the range 0...100, which is the normalized return
value of these functions.
Take a look at these two functions and maybe remove the comment characters
from the lines
//#define DEBUG_SIGNALSTRENGTH
//#define DEBUG_SIGNALQUALITY
in dvbdevice.c to get some debug output if your device doesn't return any
directly useful values and may have to be added appropriately to the
'switch (subsystemId)' statement.
The channel display of the 'sttng' skin uses these values to implement
a signal strength/quality display.
From the HISTORY file:
- Fixed cString's operator=(const char *String) in case the given string is the
same as the existing one (thanks to Dirk Leber).
- Avoiding a gcc 4.6 compiler error in the skincurses plugin (thanks to Tobias Grimm).
- TsGetPayload() now checks if there actually is a payload in the given TS packet
(reported by Dirk Leber).
- Now sorting the source file names in the call to xgettext, to make sure the results
are not dependent on the sequence of the files.
Plugin authors may want to change the line containing the xgettext call in their
Makefile accordingly by changing "$^" to "`ls $^`".
- The primary device is now only avoided for recording if it is an old SD full
featured card. This is done through the new function cDevice::AvoidRecording().
- Subtitle PIDs are now also decrypted (thanks to Reinhard Nissl).
- Fixed a possible race condition in cDiseqc::Execute() (reported by Marco Göbenich).
The return value of cDiseqcs::Get() is now const, so plugin authors may need to
adjust their code if they use this function.
- The new functions cDevice::SignalStrength() and cDevice::SignalQuality() can be
used to determine the signal strength and quality of a given device (thanks to
Rolf Ahrenberg for some input on how to use BER and UNC values to generate a
"quality" value).
- The 'sttng' skin now displays two colored bars at the bottom of the channel display,
indicating the strength (upper bar) and quality (lower bar) of the received signal.
The number to the left of these bars indicates the actual device the current
channel is being received with.
- Fixed detecting frames in case the Picture Start Code or Access Unit Delimiter
extends over TS packet boundaries (reported by Johan Andersson).
In order to fix this, the semantics of cFrameDetector had to be changed a little.
See cRecorder::Action() and cIndexFileGenerator::Action() on how to use the new
cFrameDetector::NewPayload() function.
- The frame detector now only starts collecting PTS values after it has seen the
first I-frame, otherwise it might get MaxPtsValues values and stop analyzing
even though the incoming data is still garbage (reported by Derek Kelly).
- The info file of a recording is now only overwritten with a new fps value if
that new value is not the default value (thanks to Derek Kelly for reporting a
problem with the fps value being overwritten in case a recording was interrupted
and resumed, and the fps value could not be determined after resuming recording).
- The initial channel is now stored by the channel ID in the setup.conf file, in
order to avoid problems in case channels are reordered or deleted (reported by
Lars Bläser).
- Added support for "content identifier descriptor" and "default authority descriptor"
to 'libsi' (thanks to Dave Pickles).
|
|
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Changed the position of Sirius 4 to S4.8E in sources.conf (thanks to Alexander Gross).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Moved the declaration of cMenuCommands to menu.h, so that plugins can use it.
- Added a note to the MANUAL, saying that adding new transponders only works if the
"EPG scan" is active (suggested by Halim Sahim).
- Improved handling frames at the beginning and end of a recording in cDvbPlayer for
devices with large buffers (thanks to Reinhard Nissl).
- Implemented cDeviceHook to allow plugins more control over which device can
provide which transponder (thanks to Reinhard Nissl).
- Implemented cDevice::GetCurrentlyTunedTransponder() (thanks to Reinhard Nissl).
- Moved strictly necessary Makefile options into Make.global, which is included
by all plugins (thanks to Paul Menzel). The Makefiles of existing plugins should be
modified like this:
------------------------------------------------------------
--- PLUGINS/src/hello/Makefile 2009/10/18 14:00:07 2.1
+++ PLUGINS/src/hello/Makefile 2010/02/06 14:50:03 2.2
@@ -18,7 +18,7 @@
### The C++ compiler and options:
CXX ?= g++
-CXXFLAGS ?= -fPIC -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses
+CXXFLAGS ?= -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses
### The directory environment:
@@ -26,6 +26,10 @@
LIBDIR = ../../lib
TMPDIR = /tmp
+### Make sure that necessary options are included:
+
+include $(VDRDIR)/Make.global
+
### Allow user defined options to overwrite defaults:
-include $(VDRDIR)/Make.config
------------------------------------------------------------
- Added device definitions to the diseqc.conf file format, so that certain satellite
positions can be limited to a given list of devices.
This obsoletes the SOURCECAPS patch.
- Keeping subtitles visible when pausing replay (thanks to Rolf Ahrenberg).
- Fixed adding new transponders in case there is only a single channel in the
channel list (reported by Halim Sahin).
- The file name in the "Timers" menu now shows only the base name of the recording
without the folder path (if any). Otherwise with long folder paths the actual
recording name was not visible at all.
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Exported some libsi functions (thanks to Lucian Muresan).
- Improved scalability of the default skins.
- Fixed the German translation of "Folder name must not contain '%c'!" (thanks to
Frank Schmirler).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Plugins can now define new sources. In order to implement this, the following
changes were made:
+ The transponder parameter string is no longer interpreted by cChannel, but rather
stored as is and used only by the respective device. That way plugins can use a
channel's parameter string to store arbitrary data (see vdr.5).
+ The new class cSourceParam can be used by plugins to define new sources, and to
implement OSD items that will be used in the channel editor for editing the source
specific parameters of a channel (see dvbdevice.c for an example of how this is
done for the default DVB devices).
+ Purely numerical values are no longer accepted in the 'source' parameter of a
channel.
This obsoletes the PLUGINPARAM patch.
- Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras).
- cSafeFile::Close() now flushes the file (suggested by Stephan Austermühle).
- The option "Setup/DVB/Use Dolby Digital" now only controls whether Dolby Digital
tracks appear in the "Audio" menu. Dolby Digital is always recorded.
This obsoletes the DOLBYINREC patch.
|
|
- Re-implemented handling of DVB-S2, which first appeared in version 1.5.14, but was
revoked in version 1.5.15 in favor of making a stable version 1.6.0. VDR now
requires the "multiproto" DVB driver, e.g. from http://jusst.de/hg/multiproto.
Note that the channels.conf file now supports additional parameters, so you may
want to make sure you have a backup of this file in case you need to go back to
the previous version of VDR!
- Fixed displaying transponder data when it is modified (thanks to Reinhard Nissl).
- Fixed handling the counter in detection of pre 1.3.19 PS data (thanks to Reinhard
Nissl).
- Improved logging system time changes to avoid problems on slow systems under
heavy load (suggested by Helmut Auer).
- Now setting the thread name, so that it can be seen in 'top -H' (thanks to Rolf
Ahrenberg).
- Fixed initializing the timer's flags in the cTimer copy constructor (thanks to
Andreas Mair).
- Fixed setting the OSD level in the 'osddemo' example (thanks to Wolfgang Rohdewald).
- Increased the time between checking the CAM status to 500ms to avoid problems
with some CAMs (reported by Arthur Konovalov).
|
|
- The character '|' in description texts of EPG records is now interpreted as a
newline character (suggested by Gerhard Steiner).
- Updated 'channels.conf.cable' (thanks to Andreas Kool).
- Improved handling of repeated remote keys.
- The RCU now only sets the channel number display when there are no incoming remote
control keys, which improves reaction on repeated keys.
- The actual tuning is now done in a separate thread, which makes zapping through the
channels a lot faster and no longer gets stuck on channels that don't broadcast.
This also makes "Motor-DiSEqC" work (thanks to Reinhard Walter Buchner for his help
in testing this). Since switching channels now no longer explicitly waits for a
channel lock in the foreground thread, the "panic level" mechanism is no longer
used (maybe we don't need it any more, anyway).
- The keyboard is now by default always active to control VDR. The 'make' option
REMOTE=KBD is therefore obsolete. When compiling VDR with REMOTE=RCU or REMOTE=LIRC,
the keyboard can thus now be active together with the remote control. If you want
to build VDR _without_ keyboard support you can set NO_KBD=1 in the 'make' call.
Since the keyboard codes are now different from the ones used previously (which
were mapped by the 'ncurses' library) you will need to go through the "Learning
keys" procedure again. To do so, either delete the file /video/remote.conf or
remove the KBD.* entries from it before starting this version of VDR.
(Thanks to Thomas Sailer for pointing out how to set the terminal parameters to
read from the keyboard).
- The 'ncurses' library is now only necessary when compiling VDR with DEBUG_OSD=1.
|
|
- Fixed a missing Flush() call in the remote control learning procedure (thanks
to Oliver Endriss).
- Modified channel handling to cover all parameters necessary for DVB-C and DVB-T
(see man vdr(5) for the meaning of the additional parameters stored in the field
previously named 'polarisation'). Thanks to Uwe Scheffler and Andy Carter for testing.
If you have a system with different kinds of DVB cards, like DVB-T and DVB-C,
for instance, there is no more need to distinguish the channels through the
'Ca' parameter in order to assign them to the various DVB cards. This is now
taken care of by the "source" parameter. So a channel marked as "terrestrial",
for example, will only be received on DVB-T cards.
Note that the cChannel class has been moved into a separate file (channels.[ch]),
and that all data members have been made private and are now only accessible
through member functions. You may have to change any plugin code that accesses
cChannel data accordingly.
- The new configuration file 'sources.conf' contains the various signal sources
(satellites, cable and terrestrial) which are used in 'channels.conf' and
'diseqc.conf' (thanks to Reinhard Walter Buchner for adding some satellites to
'sources.conf' and Oliver Endriss and Lauri Tischler for testing and debugging).
- The 'diseqc' parameter in the channel definitions has been redefined to hold the
"source" of the given channel (which can be either a satellite, cable or terrestrial).
For compatibility with channels.conf files from older versions, numeric values in
this parameter will be tolerated, but they have no meaning. If you want to use
DiSEqC you will need to replace these old values with the proper source identifiers
defined in the new configuration file 'sources.conf'. See how this is done in the
'channels.conf' file that comes with the VDR package.
- The new configuration file 'diseqc.conf' can be used to set up the individual
diseqc configuration (see man vdr(5) for a description of the file format).
- The "Edit channel" menu has a new entry "Source:" in which the source of this
channel can be selected (either a satellite, cable or terrestrial). The set of
parameters at the end of this menu will change according to the type of source.
- The "Use DiSEqC" parameter in the "Setup/LNB" menu has been moved to the beginning
of the list and disables the rest of the parameters when set to "yes", since these
are now only meaningful if DiSEqC is _not_ used.
- Removed some unnecessary #includes from eit.c and changed cMenuRecordings::Del()
to cMenuRecordings::Delete() to avoid warnings in gcc-3.2 (thanks to Andreas
Schultz for pointing this out).
- Improved skipping channels that are (currently) not available (thanks to Stefan
Huelswitt).
- Updated channels.conf.terr and channels.conf.cable (thanks to Uwe Scheffler).
- Fixed a bug when pressing the "Blue" button in the main menu without having
displayed it (thanks to Oliver Endriss for reporting this one).
|
