| Age | Commit message (Collapse) | Author |
|---|
|
VDR developer version 1.7.32 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.32.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.31-1.7.32.diff
MD5 checksums:
068ba78fd427694dcc480fe3b2d07148 vdr-1.7.32.tar.bz2
222f1e9b4d4edaa6fe57286409614cc7 vdr-1.7.31-1.7.32.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
The main focus of this version is on an improved frame detection code,
and improvements to the cutting process. When cutting a recording, VDR
now removes any "dangling" TS packets from the beginning of an editing
sequence and pulls in any "pending" TS packets at the end of a sequence.
It also fixes all timestamps and continuity counters.
However, while the results look much better now in, for instance, Kaffeine,
the TT S2-6400 still shows some video artifacts at the editing points, and
the Mac video player sometimes totally chokes on edited material.
I did spend a lot of time trying to find out what could still be wrong here,
but couldn't come up with any new ideas. So I think it's now time to invite
others to test this new cutting code, read the source code and try to find
out what's still going wrong here. Maybe (hopefully ;-) it's just some stupid
little error... ;-)
From the HISTORY file:
- Pressing the Play key during normal live viewing mode now opens the Recordings menu
if there is no "last viewed" recording (thanks to Alexander Wenzel).
The same behavior has been implemented for the Blue key in the main menu.
- cIoThrottle::Engaged() is now also checked in cRemoveDeletedRecordingsThread::Action(),
to suspend removing deleted recordings in case this is necessary to make room for
new, ongoing recordings (suggested by Udo Richter).
- The cThread constructor now has an additional boolean parameter that can be set to
true to have this thread run at a lower priority. Plugin authors that use low
priority threads may want to use this instead of the calls to SetPriority(19) and
SetIOPriority(7). The priority of a thread ("low" or "high") is now logged when the
thread starts.
- Changed DTV_DVBT2_PLP_ID to DTV_STREAM_ID in dvbdevice.c to adapt to an incompatible
change in DVB API 5.8 (reported by Derek Kelly).
Removed the meanwhile obsolete definition of FE_CAN_TURBO_FEC.
- Fixed some compiler warnings under gcc version 4.7.1.
- Fixed setting the video format in the dvbhdffdevice (thanks to Torsten Lang).
- Fixed 'make install' to not overwrite existing configuration files (thanks to Peter
Münster).
- Added including the Make.global and Make.config files to the dvbdhffdevice's
libhdffcmd/Makefile.
- Added options to build a 32-bit version of VDR on a 64-bit machine to
Make.config.template.
- Fixed handling VPS timers in case the running status of an event goes to '1' (not
running) and later goes to '4' (running).
- If a frame position in the 'marks' file of a recording doesn't point to an I-frame,
it will now be shifted towards the next I-frame, either up or down, whichever is
closer (suggested by Udo Richter).
- Fixed a possible memory leak in SI::StructureLoop::getNextAsPointer() (reported by
Sundararaj Reel).
- Fixed handling timers in case an event is modified and "phased out" while the timer
is recording.
- Improved frame detection by parsing just far enough into the MPEG-4 NAL units to get
the necessary information about frames and slices.
- The initial syncing of the frame detector is now done immediately after the first
complete GOP has been seen. This makes recordings and especially pausing live video
start up to twice as fast as before.
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Fixed handling the very last entry in a recording index.
- The return type of cMarks::Add() has been changed to void, since due to the sorting
of the list of marks the returned pointer might have pointed to a totally different
mark. Besides, the return value was never actually used.
- Improved editing TS recordings by
+ stripping dangling TS packets from the beginning of a sequence
+ including pending TS packets at the end of a sequence
+ fixing all timestamps and continuity counters
+ generating editing marks for the edited version in such a way that each cutting
point is marked by an "end" and "begin" mark with the same offset
+ no longer generating an editing mark at the "end" of the edited recording (this
was actually generated at the beginning of the last GOP, so that a subsequent
edit would have cut off the last GOP)
+ no longer generating any editing marks if the edited recording results on just
one single sequence
+ ignoring pairs of editing marks that are placed at exactly the same position of
a recording when actually cutting the recording
+ not doing anything if the editing marks in place would result in the edited
version being the same as the original recording
- Editing marks can now be placed directly on top of each other, in which case they
simply mark a position, but have no effect on the actual cutting process.
- When positioned at an offset where two (or more) editing marks are placed on top
of each other, the '4' key moves the first one of them to the left, while the '6'
key moves the last one of them to the right. The '7' and '9' key handle multiple
marks at the same place as if it were one single mark.
- Modified editing marks are now written to disk whenever the replay progress display
gets hidden (thanks to Christoph Haubrich).
|
|
VDR developer version 1.7.31 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.31.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.30-1.7.31.diff
MD5 checksums:
a3edd18a352465dd26c97c1990f7bcfd vdr-1.7.31.tar.bz2
32ff98697d1b383478a6e1932e4afc9c vdr-1.7.30-1.7.31.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
The default skin "LCARS" displays the signal strengths and qualities of
all devices in its main menu. For devices that have an stb0899 frontend chip
(like the TT-budget S2-3200) retrieving this information from the driver is
rather slow, which results in a sluggish response to user input in the main
menu. To speed this up you may want to apply the patches from
ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches
to the LinuxDVB driver source.
The changes since version 1.7.30:
- If regenerating an index file fails and no data is written to the file, VDR now
reports this error and removes the empty index file.
- The setup parameter "Recording/Instant rec. time (min)" can now be set to '0',
which means to record only the currently running event (based on a patch from Matti
Lehtimäki).
- Decreased the ring buffer put/get trigger sizes from 1/3 to 1/10.
- The script given to VDR with the '-r' option is now also called whenever a
recording is deleted (thanks to Alexander Wenzel).
- Improved detecting frames in MPEG 4 video (reported by Andrey Pridvorov).
- cPatPmtParser::ParsePmt() now also recognizes stream type 0x81 as "AC3", so that
recordings that have been converted from the old PES format to TS can be played
(suggested by Jens Vogel).
- Fixed a leftover frame counter in the LCARS skin's replay display after jumping to
an editing mark and resuming replay.
- The new class cIoThrottle is used to allow I/O intense threads to temporarily
suspend their activities in case buffers run full (suggested by Torsten Lang).
Currently the cutter thread is suspended if the TS or Recorder buffer use more
than 50% of their capacity. Plugin authors may want to participate in this
mechanism if they use intense background I/O.
- Increased the size of the TS buffer to 5MB and that of the Recorder buffer to
20MB to better handle HD recordings (suggested by Torsten Lang).
- Moved cleaning up the EPG data and writing the epg.data file into a separate
thread to avoid sluggish response to user input on slow systems (based on a patch from
Sören Moch).
- Fixed sorting folders before recordings in case of UTF-8 (thanks to Sören Moch).
- Reactivated stripping control characters from EPG texts and adapted it to UTF-8.
- Added missing decrementing of 'len' in libsi/si.c's String::decodeText() functions.
- When checking whether a video directory is empty, file names that start with a
dot ('.') are no longer automatically ignored and implicitly removed if the directory
contains no other files. Instead, RemoveEmptyDirectories() now has an additional
parameter that can be given a list of files that shall be ignored when considering
whether a directory is empty. This allows users to continue to use files such as
".keep" to prevent a directory from being deleted when it is empty. Currently the
only file name that is ignored is ".sort".
|
|
Original announce message:
VDR developer version 1.7.28 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.28.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.27-1.7.28.diff
MD5 checksums:
3ccff2dcc42d112e23dd64f2c39f02f1 vdr-1.7.28.tar.bz2
7249ead4aca4b24e53d49d11c67e1613 vdr-1.7.27-1.7.28.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
The new default skin "LCARS" displays the signal strengths and qualities of
all devices in its main menu. For devices that have an stb0899 frontend chip
(like the TT-budget S2-3200) retrieving this information from the driver is
rather slow, which results in a sluggish response to user input in the main
menu. To speed this up you may want to apply the patches from
From the HISTORY file:
- Fixed cPixmapMemory::DrawEllipse() for quadrants -1 and -4.
- Fixed getting the maximum short channel name length in case there are no short names
at all (reported by Derek Kelly).
- The new function cDevice::DeviceType() returns a string identifying the type of
the given device.
- Now limiting the number of characters of a channel's (short) name to 16 in the
schedules menus, to keep that column from getting overly wide in case there is
a channel with a very long name that has no short name.
- Fixed EPG scan on systems with only a single DVB device that use software output
(reported by Juergen Lock).
- Skins can now inquire the menu category for which their cSkinDisplayMenu is currently
being used. This can be done either through a call to cSkinDisplayMenu::MenuCategory()
or by reimplementing cSkinDisplayMenu::SetMenuCategory(). This information allows a
skin to use special icons or decorations for the various types of menus in VDR.
- The new setup option "DVB/Standard compliance" can be used to switch between different
variations of the DVB standard (thanks to Rolf Ahrenberg). Currently there is "DVB"
(for the original DVB standard) and "ANSI/SCTE", which is used to properly handle
certain private stream types.
- The disk usage is no longer automatically added to the title of the main and
"Recordings" menus. This has always been a mekeshift solution and it is now up
to the individual skin if, where and how it wants to display this information.
A skin can use the new cVideoDiskUsage class to implement such a display. For
compatibility, the default skins "Classic VDR", "ST:TNG Panels" and "Text mode"
(i.e. curses) have been changed to behave like before. Other skins may want to
display the disk usage in totally different ways.
- A cOsdMenu can now handle skins that display different numbers of items in the
various menu categories.
- OSD and skin are now reinitialized after a plugin setup page has been confirmed,
to have them react immediately in case any change to a plugin's setup parameter
has an effect on the OSD.
- The Timers list is now marked as modified whenever a recording starts or ends.
- Fixed cDevice::StillPicture(), making sure it doesn't call the derived class's
function if no buffer has been allocated (reported by Marcus Roscher).
- Fixed the SVDRP command UPDR, which didn't update the global recordings list
(reported by Lars Hanisch).
- cControl::Control() now has an additional boolean parameter, which can be set to
true to get the current player control even if it is hidden.
- The new functions cControl::GetRecording() and cControl::GetHeader() can be used
to retrieve information about what the current player is playing.
- Fixed a possible high CPU load when pausing replay (thanks to Reinhard Nissl).
- Fixed character comparisons in cSubtitleObject::DecodeCharacterString() (reported
by Reinhard Mantey).
- Renamed the function cString::sprintf(const char *fmt, va_list &ap) to vsprintf(),
because it might inadvertently be called with a 'char *' as the second argument on
some compilers and cause a crash (reported by Sundararaj Reel).
- Removed the "bondedMasterFailed" mechanism from cDvbTuner, because it caused
problems with the EPG scan in case a transponder is not receivable in a setup with
bonded devices (reported by Michael Schneider).
- Making sure setup strings don't contain any newline characters (thanks to Joachim
Wilke).
- The new member function cSkinDisplayReplay::SetRecording() allows a skin to display
more information about the currently played recording.
- Fixed a mismatched 'delete' in cSchedules::SetEpgDataFileName() (thanks to Reinhard
Mantey).
- The DrawText() functions of the OSD now accept the new alignment flag taBorder,
which triggers keeping a proper distance from the edge that taLeft or taRight
aligns to.
- Fixed checking for UTF-8 support in cFont::Bidi() (reported by Torsten Lang).
- If a recording has no info file, the 'title' of the recording's info is now set
to the recording's name.
- cVector::Clear() now reinitializes any previously used members.
- Fixed resetting CAMs (thanks to Marco Skambraks).
- The new function RgbShade() (include osd.h) can be used to generate a brighter or
darker version of a given color.
- The new class cSortedTimers can be used to quickly get a list of all timers, sorted
by their start time.
- The new skin "LCARS" is an enhanced version of the "ST:TNG" skin (which is still
there in its original layout, for those who don't like the LCARS skin, or can't use
it due to OSD limitations). The LCARS skin utilizes the new "menu category" feature
to display additional information on the main menu page. It shows upcoming timers
and the system's devices, as well as which device is recording which timers. The
upper pane of the main menu displays the programme data in live and replay mode,
and a progress bar. An indicator on the right side of the device list shows which
device is currently used for live viewing, and whether it is in transfer mode.
The individual device displays show the device number, the device type, which CAM
(if any ) is currently assigned to the device, and the signal strength and quality.
On the left side of the OSD there is a permanent display of the current date and
time, the disk usage and the system load.
"LCARS" is the new default skin of VDR. It requires at least a 4bpp (16 color) full
screen OSD, but you can still operate it if your OSD can handle only fewer colors
(in which case you may want to switch to the "ST:TNG" or "Classic VDR" skin).
- Finally removed the code marked with __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS
and LEGACY_CRECEIVER.
- Now making sure that the "small font" is never larger than the "osd font".
- Fixed font handling with fontconfig 2.9.0 or newer (thanks to Joerg Bornkessel).
- Extended the interface to the script that gets called for recordings, so that in
the "edited" case it also provides the name of the original recording (thanks to
Christian Richter).
- Added DeleteEvent() to the EPG handler interface, so that an EPG handler can trigger
deleting of an event (thanks to Christian Kaiser).
- Speeded up opening menus on systems with many (several thousands) of recordings, by
caching the information whether a recording is stored on the video directory file
system within the cRecording data (based on a patch from Torsten Lang).
|
|
Original announce message:
VDR developer version 1.7.27 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.27.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.26-1.7.27.diff
MD5 checksums:
bfeaa79a9e55144bca2b69139c45f1bb vdr-1.7.27.tar.bz2
b23344be51d3e2c2d96cc2dd4e8e564e vdr-1.7.26-1.7.27.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Changed the Green button in the "Edit timer" menu from "Once" to "Single"
(suggested by Rolf Ahrenberg).
- Fixed some typos in HISTORY and CONTRIBUTORS (thanks to Ville Skyttä).
- The channel name column in the "What's on now/next" menu now adjusts its width
to display the full short name of each channel (suggested by Dominic Evans).
- Dropped the meanwhile obsolete script 'i18n-to-gettext'.
- Removed the obsolete function cPlugin::RegisterI18n().
- Removed the obsolete typedef tI18nPhrase.
- Adapted menu column widths of 'skincurses' to the wider HD OSD sizes.
- Deactivated definition of __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS (recording.h)
and LEGACY_CRECEIVER (receiver.h) to trigger an error for any plugin that still
uses the respective code. You can reactivate these to quickly make your plugin
compile again, but beware that these code parts will be removed in one of the next
versions.
- Made the "overloaded-virtual" warning an error to detect hidden overloaded
virtual functions (thanks to Anssi Hannula for pointing out -Werror=...).
Plugin authors may want to change -Woverloaded-virtual to -Werror=overloaded-virtual
in their Makefiles.
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Improved fast forwarding to the end of a timeshift recording.
- The new function cDevice::DeviceName() returns a string identifying the name of
the given device.
- When toggling a timer between "Single" and "Repeating", the previous setting is now
retained in case the user toggles back to the original value.
- When estimating the remaining disk space (in hours), the average data rate of all
existing recordings is now taken into account. If this value can't be determined,
the previous value of 25.75 MB/min is taken.
- No longer using GetFont() (which is not thread safe) in the 'osddemo' plugin.
- No longer using GetFont() (which is not thread safe) in cSubtitleRegion::UpdateTextData().
- Fixed a memory leak in cSubtitleRegion::UpdateTextData().
- Moved setting LC_NUMERIC further up to make sure any floating point numbers use a
decimal point (suggested by Tobias Grimm).
- Added missing channel locking to cEIT.
- Fixed reduced bpp support for DVB subtitles (thanks to Rolf Ahrenberg).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Reverted some improvements to Make.config.template (thanks to Christian Ruppert).
- Fixed handling IDLEPRIORITY in cDvbDevice::ProvidesChannel() (thanks to Frank
Schmirler).
|
|
Original announce message:
VDR developer version 1.7.26 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.26.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.25-1.7.26.diff
MD5 checksums:
eb57398e44935ecb0bfc532bdfead312 vdr-1.7.26.tar.bz2
62e0f39e2c53ec2b5abd3ebb0e00ce3d vdr-1.7.25-1.7.26.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- Now checking for NULL in cOsd::AddPixmap() (suggested by Christoph Haubrich).
- Fixed the German translation of "VDR will shut down in %s minutes" (thanks to
Frank Neumann).
- The replay progress display is now turned on whenever a mark is toggled (not
only when one is set).
- Toggling a mark now restarts the timeout of the replay progress display.
- Fixed a possible race condition with the SVDRP commands CLRE and PUTE, where
EPG data from the transponder could be handled even though it shouldn't be
handled for 10 seconds.
- Added some missing member initializations in cBitmap.
- Improved displaying the play mode in the ST:TNG skin.
- Made the ST:TNG skin the default in case the user selected skin is not available.
- Improved displaying signal strength and quality in the ST:TNG skin's channel
display.
- Fixed switching devices to the transponders of VPS recordings in case there
are only bonded devices. The cDevice's "avoid device" mechanism has been replaced
by using "occupied".
- Fixed selecting devices for the EPG scan in case the primary device is bonded
with an other one.
- Removed the calls to EITScanner.UsesDevice(this) from dvb[hs]ddevice.c, because
the code following these calls is only executed if LiveView is true, which is
never the case when the EITScanner switches to a channel.
- Removed the obsolete function cEITScanner::UsesDevice(). If a plugin has used this
function to find out whether a call to its cStatus::ChannelSwitch() function was
due to a live channel switch, it can use that function's new parameter LiveView.
Any plugins that implement cStatus::ChannelSwitch() need to add the parameter
'bool LiveView' to that function.
- Fixed parsing channel data in case the audio pid is 0. On channels that only
broadcast Dolby Digital audio there were sometimes log entries like
"changing pids of channel ... from ... to ..." with no apparent difference
between the old and new set of pids.
- Fixed checking pids in case a channel has only Dolby Digital audio.
- The Green button in the "Edit timer" menu can now be used to toggle between single
shot and repeating timers. This is the same as pressing '0' when the "Day" field
is selected, but it works at any time (and is more obvious).
- Revoked "If the first event in a schedule has a table id of 0x00, any incoming EIT data for
that schedule from the DVB stream will be completely ignored".
- Added a new plugin interface for implementing EPG handlers.
+ A plugin can implement an EPG handler by creating an object derived from
cEpgHandler and implementing the necessary member functions.
+ The special handling of events with table id 0x00 has been dropped.
For backwards compatibility EPG events with table ids lower than 0x4E will
be treated as if they had a table id of 0x4E, and the new plugin 'epgtableid0'
can be used to have them handled like in previous versions.
+ The default table id for a newly created cEvent has been changed to 0xFF,
which is higher than any normal table id that is broadcast in the EIT data.
See PLUGINS.html, section "Electronic Program Guide" for more information.
|
|
Original announce message:
VDR developer version 1.7.25 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.25.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.24-1.7.25.diff
MD5 checksums:
a3fd482a3dd8027706d4f32a88c6bd13 vdr-1.7.25.tar.bz2
f34adcdc0cdab378431d8946872d6b59 vdr-1.7.24-1.7.25.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- The fps value for channels where it differs from the default is now set correctly
when pausing live video.
- Increased the average character estimate for calculating tab positions in skins,
to better suit wide fonts (reported by Rudi Hofer).
- Fixed getting the subsystem ids of DVB devices in case they have been rearranged
via udev rules.
- Added several cTimer::Set...() functions (suggested by Alexander Rieger).
- Changed the return value of cTimer::SetFile() to 'void'.
- Revoked "Fixed a possible deadlock in time shift mode" because it caused trouble with
output on vdr-xine and dxr3, and also short glitches when replaying on any output
device.
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed handling subtitle color palettes on channels where subtitles appear
"word by word" (thanks to Rolf Ahrenberg).
- Fixed upscaling cBitmaps with anti-aliasing (thanks to Rolf Ahrenberg for reporting
a problem with color palettes in subtitles).
- Fixed getting the video aspect ratio for scaling subtitles.
- Removed the "PrimaryLimit". Old "full featured" DVB cards can be run with the
--outputonly option to avoid problems with recording high bandwidth channels.
Besides, with HDTV becoming ever more popular those cards are pretty much obsolete
by now (the TT S2-6400 has no problems recording and replaying high bandwidth
channels simultaneously). And, last but not least, people using software players
won't notice this change, anyway.
- Since cReceivers can have priorities between -99 and 99, the priority
for an unused device has been changed from -1 to -100.
- If the first event in a schedule has a table id of 0x00, any incoming EIT data for
that schedule from the DVB stream will be completely ignored. This way an external
EPG source can fill the schedules with EPG data that will not be messed up with
that from the DVB data stream. Note, though, that this means VDR can not do VPS
controlled recordings with such events!
- Added some typecasts to silence gcc compiler warnings (thanks to Rolf Ahrenberg).
- Fixed handling overlapping timers in case a VPS timer with higher priority needs
to interrupt a timer with lower priority.
- The code for the RCU remote control unit has been moved into a separate plugin
named "rcu".
The REMOTE=RCU option in the 'make' call for VDR is now obsolete.
The command line option --rcu is now obsolete. Use -Prcu instead. If you have
used --rcu with a device path, use -P"rcu -d<device>".
- Added support for automatically selecting subtitles when playing old PES
recordings made with the subtitles plugin (thanks to Anssi Hannula).
- Revised priority handling to allow receivers with a priority that is lower than
that of live viewing (with suggestions from Frank Schmirler):
+ An idle device (one that is not used for live viewing and has no receiver
attached to it) now has priority IDLEPRIORITY (-100).
+ An unused CAM slot now has priority IDLEPRIORITY.
+ The default priority of a cReceiver is now MINPRIORITY (-99).
+ A device that is used only for live viewing (no matter whether it's in Transfer
Mode or real live mode) now has priority TRANSFERPRIORITY (-1).
+ The function cDevice::Receiving() now returns true if there is any receiver
attached to the device. Its boolean parameter has no meaning any more.
+ The default value for the Priority parameter of the function cDevice::ProvidesChannel()
has been changed to IDLEPRIORITY.
- Added a Query parameter to cDevice::GetDevice(), so that devices can be queried
without side effects when zapping.
- Replaced min(max()) calls with the new function constrain().
- Fixed handling OSD color button texts in case a menu item has texts of its own
(reported by Rolf Ahrenberg). If a plugin creates derived cMenuEditItems that set
color button texts, these should not set the texts directly by calling
cSkinDisplay::Current()->SetButtons(), but rather call the new member function
cMenuEditItem::SetHelp().
- Moved the call to cStatus::MsgChannelSwitch(this, 0) to the beginning of
cDevice::SetChannel(), so that any receivers that have been attached to the
device by plugins may be detached before the final call to GetDevice().
This actually reverts "Only calling cStatus::MsgChannelSwitch() if a channel
is actually going to be switched or has actually been switched successfully"
which was made in version 1.1.10, so please report if this has any unwanted
side effects.
|
|
Original announce message:
VDR developer version 1.7.24 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.24.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23-1.7.24.diff
MD5 checksums:
a034c5e399417dfc583483f650d003ee vdr-1.7.24.tar.bz2
aa1a2b202da92e65945ff39470b26618 vdr-1.7.23-1.7.24.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Fixed a high load in case a transponder can't be received.
- Improved the way DVB_API_VERSION is checked.
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed asserting there is a live programme if the primary device is bonded with
a device that starts a recording on a different band.
- Fixed the return type of cMyDeviceHook::DeviceProvidesTransponder() in PLUGINS.html.
- Fixed a crash in a plugin using cDeviceHook when VDR ends (reported by Oliver Endriss).
- Some improvements to the Makefiles (thanks to Christian Ruppert).
- Fixed cRecording::LengthInSeconds(), which wrongfully rounded the result to full
minutes (thanks to Christoph Haubrich).
- Symbolic links are no longer resolved in cRecordings::ScanVideoDir() (thanks to
Sundararaj Reel).
- The epg.data file is now read in a separate thread to make the startup process
faster in case the file is very large (suggested by Helmut Auer).
- Fixed selecting the primary device for receiving the live viewing channel in
case it is bonded with an other device and has no receiver attached to it.
- Fixed a possible crash when canceling VDR while displaying subtitles, and the
primary device is no longer available.
- Improved handling subtitles of BBC channels.
- No longer using tabs as delimiter in the EPG bugfix log (they were garbled in the
log file).
- Added a missing '.' after the month in VPS strings.
- Added some missing 'const' to cDevice (thanks to Joachim Wilke).
- Fixed handling the PrimaryLimit when requesting a device for live viewing
(reported by Uwe Scheffler).
- Removed superfluous calls to SetVideoFormat() from device constructors. This
function is called in cDevice::SetPrimaryDevice(), anyway.
- An ongoing editing process is now canceled if either the original or the edited
version of the recording is deleted from the Recordings menu.
- The SVDRP command DELR now won't delete a recording that is currently being edited.
- Removed code stub for obsolete SVDRP command MOVT.
- The DVB device adapters/frontends are now probed by scanning the /dev/dvb directory
instead of looping through adapter/frontend numbers. This allows for "holes" in the
device numbering.
- cReadDir::Next() now skips directory entries "." and "..".
- Fixed a possible deadlock in time shift mode.
- Fixed switching into time shift mode when pausing live video (thanks to Reinhard
Nissl for helping to debug this one).
|
|
Original announce message:
VDR developer version 1.7.23 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diff
MD5 checksums:
de136f7be28c4b6f1fa0e2218b4acc11 vdr-1.7.23.tar.bz2
2977b75cd8dacad187d11c10b867d56a vdr-1.7.22-1.7.23.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- Removed the '.pl' suffix from svdrpsend.pl (sorry, I missed that one).
- Fixed bonding more than two devices.
- Fixed handling symbolic links in cRecordings::ScanVideoDir() (reported by
Sundararaj Reel).
- Fixed a memory leak in cRecordings::ScanVideoDir() in case there are too many
link levels (reported by Sundararaj Reel).
- Removed redundant memset() in the ctor of cSatCableNumbers (triggered by
Ville Skyttä pointing out that the argument sequence in the call was wrong).
- Removed a redundant NULL check in cDvbSpuDecoder::setTime() (thanks to Ville Skyttä).
- Added HasSnr to the DEBUG_SIGNALQUALITY output in cDvbTuner::GetSignalQuality()
(triggered by Ville Skyttä pointing out that the variable HasSnr was unused).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added support for HbbTV to libsi (thanks to Christoph Haubrich).
- Added support for devices with more than one delivery system per frontend.
This requires a DVB driver with version 5.5 or higher that can handle the
DTV_ENUM_DELSYS call. With older drivers it will fall back to one delivery
system per frontend.
- Updated the Hungarian language texts (thanks to István Füley).
- cDvbTuner::ExecuteDiseqc() now makes sure only one tuner sends SCR commands
at any given time (reported by Frank Neumann).
- cEvent::FixEpgBugs() now replaces any newline characters in stream component
descriptions with blanks (thanks to Torsten Lang for reporting a problem with
EPG data from BSkyB's "MTV MUSIC", S28.2E-2-2010-7012).
- Fixed cDvbSubtitleConverter::SetOsdData() (thanks to Rolf Ahrenberg).
- Fixed cListBase::Move() in case From and To are equal (reported by Sundararaj
Reel).
- Added support for DVB-T2 to libsi (thanks to Rolf Ahrenberg).
- Added support for handling DVB-T2 transponders. This requires a DVB driver
with version 5.3 or higher that can handle the DTV_DVBT2_PLP_ID call (thanks
to Rolf Ahrenberg).
- Fixed cConfig::Load() for g++ version 4.7.0 (thanks to Ville Skyttä).
- Fixed a possible memory corruption in cTsToPes::GetPes() in case of broken
TS packets, e.g. when switching channels.
- Fixed the SVDRP command CLRE for a single channel in case there are events
that have a timer (thanks to Timo Eskola).
- BIDI support now checks at runtime whether the system runs with UTF-8 (suggested
by Torsten Lang).
- Added member functions Adapter() and Frontend() to cDvbDevice (suggested by
Rolf Ahrenberg).
- The parameters that are only used by "second generation" delivery systems (DVB-S2
and DVB-T2) are no longer written into channels.conf for "first generation"
delivery systems (DVB-S and DVB-T).
- Changed IndexToHMSF() so that it can handle negative Index values.
- Added option -N to the msgmerge call in the Makefile, because fuzzy translation
mostly resulted in useless strings.
- The new setup option "Replay/Show remaining time" can be used to switch between
showing the total length or the remaining time of the recording that is currently
replayed.
- Fixed wrongfully displaying the length of a recording in the title of the replay
progress display.
- Fixed frozen live view with device bonding in case the bonded master is used for
live viewing (reported by Uwe Scheffler).
|
|
Original announce message:
VDR developer version 1.7.22 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21-1.7.22.diff
MD5 checksums:
b9c0fe1aac8e653c0d0234bc72c2bb2c vdr-1.7.22.tar.bz2
868bb332342c9a78beda17cc85e0bb93 vdr-1.7.21-1.7.22.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
From the HISTORY file:
- Fixed scaling subtitles in case the primary device's GetVideoSize() function doesn't
return actual values (thanks to Luca Olivetti).
- The DiSEqC codes are now copied in the call to cDiseqc::Execute().
- VDR now supports "Satellite Channel Routing" (SCR) according to EN50494 (based on
the "unicable" patch from Lars Hanisch).
Since "Unicable" is a registered trademark and stands for only one of many
implementations of SCR, the following changes have been made compared to the patch,
which need to be taken into account by people who have set up their system using
the patch:
- The 'U' parameter in the diseqc.conf file has been changed to 'S' ("Scr").
- The configuration file name has been changed from "unicable.conf" to "scr.conf".
- Updated sources.conf (thanks to Arthur Konovalov).
- The SVDRP command LSTC now also accepts channel IDs (thanks to Dominic Evans).
- Fixed handling DVB subtitles and implemented decoding textual DVB subtitles (thanks
to Rolf Ahrenberg).
- Added cap_net_raw to the capabilities that are not dropped (thanks to Dominic Evans).
- Fixed setting the start time of an edited recording (thanks to Christoph Haubrich).
- Temporarily switching free devices to transponders in order to have their running
status updated is now done by marking the devices as "occupied" for a certain
amount of time.
- The new setup options "LNB/Device n connected to sat cable" can be used to define
which DVB-S devices are connected to the same sat cable and are therefore "bonded".
This obsoletes the LNBSHARE patch. Users of the LNBSHARE patch will need to newly
set up their sat devices with the above options.
- Fixed a crash when deleting a recording while cutting it (thanks to Ville Skyttä).
- Fixed several spelling errors (thanks to Ville Skyttä).
- The new SVDRP command UPDR can be used to trigger an update of the list of
recordings (thanks to Lars Hanisch).
- Added generating a pkg-config file to the Makefile (thanks to Ville Skyttä).
- Removed the '.pl' suffix from all scripts (thanks to Ville Skyttä).
- Changed the default location for the LIRC socket to /var/run/lirc/lircd (thanks
to Ville Skyttä).
- Added file name and line number to LOG_ERROR_STR() (thanks to Rolf Ahrenberg).
- Replaced all calls to sleep() with cCondWait::SleepMs() (thanks to Rolf Ahrenberg).
- Fixed a crash with malformed SI data (patch from vdr-portal).
|
|
Original announce message:
VDR developer version 1.7.21 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.20-1.7.21.diff
MD5 checksums:
7300bfd997db1a848bd774fefe4aec80 vdr-1.7.21.tar.bz2
c4e745939f31543dd607b97d58fc86be vdr-1.7.20-1.7.21.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
This version contains functions to determine the "signal strength"
and "signal quality" through cDevice. If you are using a DVB card that
contains an stb0899 frontend chip (like the TT-budget S2-3200) you may
want to apply the patches from
ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches
to the LinuxDVB driver source in order to receive useful results from
that frontend.
From the HISTORY file:
- Fixed detecting frames for channels that split frames into several payloads
(reported by Derek Kelly).
- Now initializing Setup.InitialChannel to an empty string to avoid problems in
case there is no setup.conf.
- The start time of an edited recording is now set to the time of the first
editing mark (thanks to Udo Richter).
This obsoletes the CUTTIME patch.
- Direct access to the members start, priority, lifetime, and deleted of cRecording
as well as to position and comment of cMark is now deprecated. Plugin authors
should switch to the new access functions for these members. For now the macro
__RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS is defined in recording.h, which
exposes these members, so that existing plugins will still compile. Comment out
this #define to check whether a particular plugin needs to be modified.
This #define may be removed in a future version.
- The new functions cRecording::NumFrames() and cRecording::LengthInSeconds() return
the number of frames and length (in seconds) of a recording (suggested by Steffen
Barszus).
- The subtitle PIDs are now stored in the channels.conf file as an extension to the
TPID field (thanks to Rolf Ahrenberg).
- The new function cDevice::ProvidesEIT() is used to determine whether a device can
provide EIT data and will thus be used in cEITScanner::Process() to receive EIT
data from the channels it can receive (suggested by Rolf Ahrenberg). Note that by
default it is assumed that a device can't provide EIT data, and only the builtin
cDvbDevice returns true from this function.
- The Audio and Subtitles options are now available through the Green and Yellow
keys in the Setup/DVB menu (thanks to Rolf Ahrenberg). This is mainly for remote
controls that don't have dedicated keys for these functions.
- The SVDRP command HITK now accepts multiple keys (up to 31).
- The Recordings menu now displays the length (in hours:minutes) of each recording
(thanks to Rolf Ahrenberg). Note that the "new" indicator has been moved from the
recording time to the length column. This new format is also used by the SVDRP
command LSTR, so in case you have an application that parses the LSTR output,
you will need to adjust it to the new format.
- The dvbsddevice plugin now supports the new option --outputonly, which disables
receiving on SD FF devices and uses the device only for output (thanks to Udo
Richter).
- Fixed detecting frames on radio channels (reported by Chris Mayo).
- Revoked the changes to cFrameDetector that have been introduced in version 1.7.19.
Detecting frames in case the Picture Start Code or Access Unit Delimiter
extends over TS packet boundaries is now done by locally skipping TS packets
in cFrameDetector.
|
|
Original announce message:
VDR developer version 1.7.19 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.19.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.18-1.7.19.diff
MD5 checksums:
1eb04ecdc2b11ab8641ebfaa2cb93f42 vdr-1.7.19.tar.bz2
db16ce7bb51e0db837ed56ef4744a67e vdr-1.7.18-1.7.19.diff
WARNING:
========
This is a developer version. Even though I use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
This version introduces functions to determine the "signal strength"
and "signal quality" through cDevice. If you are using a DVB card that
contains an stb0899 frontend chip (like the TT-budget S2-3200) you may
want to apply the patches from
ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches
to the LinuxDVB driver source in order to receive useful results from
that frontend.
Since apparently the various frontend drivers return different maximum
values in their FE_READ_SIGNAL_STRENGTH and FE_READ_SNR functions (some
deliver a value in the range 0x0000...0xFFFF, while others return values
as "dB/10" or "dBm/10" (the latter with an offset to make the value positive,
since the parameter is unsigned), the functions cDvbTuner::GetSignalStrength()
and cDvbTuner::GetSignalQuality() use the device's "subsystem ID" to
map these values into the range 0...100, which is the normalized return
value of these functions.
Take a look at these two functions and maybe remove the comment characters
from the lines
//#define DEBUG_SIGNALSTRENGTH
//#define DEBUG_SIGNALQUALITY
in dvbdevice.c to get some debug output if your device doesn't return any
directly useful values and may have to be added appropriately to the
'switch (subsystemId)' statement.
The channel display of the 'sttng' skin uses these values to implement
a signal strength/quality display.
From the HISTORY file:
- Fixed cString's operator=(const char *String) in case the given string is the
same as the existing one (thanks to Dirk Leber).
- Avoiding a gcc 4.6 compiler error in the skincurses plugin (thanks to Tobias Grimm).
- TsGetPayload() now checks if there actually is a payload in the given TS packet
(reported by Dirk Leber).
- Now sorting the source file names in the call to xgettext, to make sure the results
are not dependent on the sequence of the files.
Plugin authors may want to change the line containing the xgettext call in their
Makefile accordingly by changing "$^" to "`ls $^`".
- The primary device is now only avoided for recording if it is an old SD full
featured card. This is done through the new function cDevice::AvoidRecording().
- Subtitle PIDs are now also decrypted (thanks to Reinhard Nissl).
- Fixed a possible race condition in cDiseqc::Execute() (reported by Marco Göbenich).
The return value of cDiseqcs::Get() is now const, so plugin authors may need to
adjust their code if they use this function.
- The new functions cDevice::SignalStrength() and cDevice::SignalQuality() can be
used to determine the signal strength and quality of a given device (thanks to
Rolf Ahrenberg for some input on how to use BER and UNC values to generate a
"quality" value).
- The 'sttng' skin now displays two colored bars at the bottom of the channel display,
indicating the strength (upper bar) and quality (lower bar) of the received signal.
The number to the left of these bars indicates the actual device the current
channel is being received with.
- Fixed detecting frames in case the Picture Start Code or Access Unit Delimiter
extends over TS packet boundaries (reported by Johan Andersson).
In order to fix this, the semantics of cFrameDetector had to be changed a little.
See cRecorder::Action() and cIndexFileGenerator::Action() on how to use the new
cFrameDetector::NewPayload() function.
- The frame detector now only starts collecting PTS values after it has seen the
first I-frame, otherwise it might get MaxPtsValues values and stop analyzing
even though the incoming data is still garbage (reported by Derek Kelly).
- The info file of a recording is now only overwritten with a new fps value if
that new value is not the default value (thanks to Derek Kelly for reporting a
problem with the fps value being overwritten in case a recording was interrupted
and resumed, and the fps value could not be determined after resuming recording).
- The initial channel is now stored by the channel ID in the setup.conf file, in
order to avoid problems in case channels are reordered or deleted (reported by
Lars Bläser).
- Added support for "content identifier descriptor" and "default authority descriptor"
to 'libsi' (thanks to Dave Pickles).
|
|
- Added Macedonian language texts (thanks to Dimitar Petrovski).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added handling of EnhancedAC3DescriptorTag (thanks to Eric Valette).
- The default SVDRP port is now 6419 (registered with ICANN/IANA by Christian Tramnitz).
Use '-p 2001' to switch back to the old port if necessary.
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- cDvbDevice::ProvidesTransponder() now checks the modulation capabilities of the
device (as far as the driver allows this).
- Fixed cFrameDetector::Analyze() in case part of the data has been processed and
there is less than MIN_TS_PACKETS_FOR_FRAME_DETECTOR left (reported by Derek Kelly).
- Added a note about not deleting cDeviceHook objects to device.h.
- Added user defined key kUser0 (suggested by Ulf Kiener).
- Include paths are now added instead of overwriting INCLUDES in the Makefile (thanks
to Paul Menzel).
- The various modulation types are now taken into account when selecting a device for
a recording or live viewing, so that devices that provide more capabilities are
spared.
- Fixed generating PMT language descriptors for multi language PIDs (thanks to Rolf
Ahrenberg).
- Transponders that use "8psk turbo fec" (a non-standard mode used by North American
providers) are now identified by assuming that all 8psk transponders on DVB-S use
"turbo fec". In order to determine whether a certain device can handle "turbo fec",
the new driver flag FE_CAN_TURBO_FEC is checked. If your device can handle "turbo
fec", and your driver doesn't have that flag, yet, you can apply the patch from
ftp://ftp.tvdr.de/vdr/Developer/v4l-dvb-add-FE_CAN_TURBO_FEC.diff. A temporary
macro in dvbdevice.c defines the flag for all those who don't need this in the
driver, so that they can continue using an unmodified driver.
Thanks to Derek Kelly for testing this.
- Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk).
- Fixed handling "none" color entries in XPM files (thanks to Thomas Günther).
- Fixed a crash when creating a new channel if the channel list is empty (reported
by Halim Sahin).
- Updated the Czech OSD texts (thanks to Radek Stastny).
- Fixed a possible out of buffer memory access in case of bad TS data (reported
by Rolf Ahrenberg).
- Implemented handling of HD resolution subtitles according to v1.3.1 of
ETSI EN 300 743, chapter 7.2.1 (thanks to Rolf Ahrenberg).
- The EPG data now handles stream components 5 (H.264-video) and 6 (HEAAC-audio).
- Fixed a problem with external Dolby Digital processing via the '-a' option in live
mode and with TS recordings (reported by Christopher Reimer).
- Added handling MPEG audio types "ISO/IEC 14496-3 Audio with LATM transport syntax"
and "ISO/IEC 13818-7 Audio with ADTS transport syntax" (suggested by Luis Fernandes).
See man vdr(5) on how the APID section of channels has been extended to store
this information.
- Added detecting channels that use service type 0x16.
- Added full handling of the stream types of Dolby Digital pids
(thanks to Jose Alberto Reguero).
- The new setup option "OSD/Number keys for characters" can be used to control whether
the number keys can be used to enter characters in a text input field (suggested
by Stefan Huskamp).
|
|
- Fixed handling empty strings in cSource::FromString().
- Assigned the source character 'I' to "IPTV" (suggested by Rolf Ahrenberg).
- Assigned the source character 'V' to "Analog Video" (suggested by Lars Hanisch).
This obsoletes the ANALOGTV patch.
- Added support for ATSC devices (thanks to Alex Lasnier).
This obsoletes the ATSC patch.
- The "Source" item in the "Edit channel" menu now wraps around the list of sources
(suggested by Halim Sahin).
- Fixed editing channel parameters.
- The new setup option "Recording/Delete timeshift recording" controls whether a timeshift
recording is automatically deleted after viewing it.
This obsoletes the DELTIMESHIFTREC patch.
Note that the meaning of the values for this option is different from the DELTIMESHIFTREC
patch: 0 means timeshift recordings are not automatically deleted (the default behavior
as in previous versions), while 1 means to ask the user whether the recording shall be
deleted.
- Added cChannel::IsSourceType() to test if a channel's source is of a given type.
- Changed the polarization characters in cDvbSourceParam::GetOsdItem() to uppercase.
- The full timer file name is now displayed if it ends with "TITLE" or "EPISODE"
(pointed out by Udo Richter).
- Fixed "attempt to drop wrong frame from ring buffer" when skipping +/- one minute
during replay.
- The new setup option "Folders in timer menu" controls whether the file names in
the timer menu are shown with their full folder path.
|
|
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Changed the position of Sirius 4 to S4.8E in sources.conf (thanks to Alexander Gross).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Moved the declaration of cMenuCommands to menu.h, so that plugins can use it.
- Added a note to the MANUAL, saying that adding new transponders only works if the
"EPG scan" is active (suggested by Halim Sahim).
- Improved handling frames at the beginning and end of a recording in cDvbPlayer for
devices with large buffers (thanks to Reinhard Nissl).
- Implemented cDeviceHook to allow plugins more control over which device can
provide which transponder (thanks to Reinhard Nissl).
- Implemented cDevice::GetCurrentlyTunedTransponder() (thanks to Reinhard Nissl).
- Moved strictly necessary Makefile options into Make.global, which is included
by all plugins (thanks to Paul Menzel). The Makefiles of existing plugins should be
modified like this:
------------------------------------------------------------
--- PLUGINS/src/hello/Makefile 2009/10/18 14:00:07 2.1
+++ PLUGINS/src/hello/Makefile 2010/02/06 14:50:03 2.2
@@ -18,7 +18,7 @@
### The C++ compiler and options:
CXX ?= g++
-CXXFLAGS ?= -fPIC -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses
+CXXFLAGS ?= -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses
### The directory environment:
@@ -26,6 +26,10 @@
LIBDIR = ../../lib
TMPDIR = /tmp
+### Make sure that necessary options are included:
+
+include $(VDRDIR)/Make.global
+
### Allow user defined options to overwrite defaults:
-include $(VDRDIR)/Make.config
------------------------------------------------------------
- Added device definitions to the diseqc.conf file format, so that certain satellite
positions can be limited to a given list of devices.
This obsoletes the SOURCECAPS patch.
- Keeping subtitles visible when pausing replay (thanks to Rolf Ahrenberg).
- Fixed adding new transponders in case there is only a single channel in the
channel list (reported by Halim Sahin).
- The file name in the "Timers" menu now shows only the base name of the recording
without the folder path (if any). Otherwise with long folder paths the actual
recording name was not visible at all.
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Exported some libsi functions (thanks to Lucian Muresan).
- Improved scalability of the default skins.
- Fixed the German translation of "Folder name must not contain '%c'!" (thanks to
Frank Schmirler).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Plugins can now define new sources. In order to implement this, the following
changes were made:
+ The transponder parameter string is no longer interpreted by cChannel, but rather
stored as is and used only by the respective device. That way plugins can use a
channel's parameter string to store arbitrary data (see vdr.5).
+ The new class cSourceParam can be used by plugins to define new sources, and to
implement OSD items that will be used in the channel editor for editing the source
specific parameters of a channel (see dvbdevice.c for an example of how this is
done for the default DVB devices).
+ Purely numerical values are no longer accepted in the 'source' parameter of a
channel.
This obsoletes the PLUGINPARAM patch.
- Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras).
- cSafeFile::Close() now flushes the file (suggested by Stephan Austermühle).
- The option "Setup/DVB/Use Dolby Digital" now only controls whether Dolby Digital
tracks appear in the "Audio" menu. Dolby Digital is always recorded.
This obsoletes the DOLBYINREC patch.
|
|
- Fixed resetting the file size when regenerating the index file.
- The new function cDevice::PatPmtParser() can be used in derived devices to access
the PAT/PMT of the currently replayed material.
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- The PCR pid in generated PMTs is now set to 0x1FFF ("no PCR pid") in
cPatPmtGenerator::GeneratePmt(), because VDR doesn't record the PCR pid.
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- The 'sky' plugin is no longer part of the VDR source.
- Improved SPU handling on devices with limited OSD capabilities (thanks to
Matthieu Castet).
- Several code modifications to avoid compiler warnings (thanks to Winfried Köhler).
- Added stream type 11172 AUDIO to cPatPmtParser::ParsePmt() (thanks to Johann
Friedrichs).
- Removed debug output of '-' from cTransfer::Receive().
- Added defines for large files to the 'newplugin' script (reported by Udo Richter).
- Removed the workaround for short channel names of "Kabel Deutschland", because
apparently they now have their data according to the DVB standard (thanks to
Johann Friedrichs).
- Some fixes to dvbspu.[hc] (thanks to Johann Friedrichs).
- Fixed a busy loop when moving editing marks (thanks to Johann Friedrichs).
- Updated sources.conf (thanks to Derek Kelly).
- Modified cCharSetConv so that it can be used to convert from "whatever VDR uses"
to a given code (thanks to Joachim Wilke).
- Channel names containing commas are now handled correctly in channels.conf.
If a channel's short name contains a comma, it is replaced with a '.'.
- cDevice now logs the device number when a new device is created.
- Fixed handling STREAMTYPE_11172_AUDIO in cPatPmtParser::ParsePmt().
- cParsePatPmt now has functions to retrieve the audio, dolby and subtitle pids.
- cPatFilter::Process() now only stores CA descriptors for video and audio pids
(thanks to Francesco Saverio Schiavarelli for reporting a problem with channels
that have some encrypted components that VDR doesn't use).
- cDevice::AddPid() now stores the stream type of the given pid (thanks to Andreas
Regel).
- Added cFont::FontName() and cFont::Size() (thanks to Andreas Regel).
- cPatPmtParser now also stores the audio stream types.
- The support for full featured DVB cards of the TT/FuSi design has been moved
into the new plugin 'dvbsddevice'. On systems that use such a card as their
primary device, this plugin now needs to be loaded when running VDR in order
to view live or recorded video. If the plugin is not loaded, the card will
be treated like a budget DVB card, and there will be no OSD or viewing
capability.
- Fixed handling the "CA PMT" generation (revised a change not mentioned in version
1.7.9's changes, which caused a malfunction with Conax and Viaccess CAMs).
- Fixed stopping subtitle display when switching the primary device (thanks to
Anssi Hannula).
IMPORTANT NOTE TO PLUGIN AUTHORS: a plugin that implements a derived cDevice
class that can replay video must now call the MakePrimaryDevice() function of
its base class.
- Fixed compiler warnings "format not a string literal and no format arguments"
in some syslog calls (thanks to Rolf Ahrenberg).
- The new command line options --edit and --genindex can be used to edit a
recording or generate its index without actually starting the entire VDR
(based on a patch from Helmut Auer).
- Improved the description of the transponder parameters in vdr.5 (thanks to
Winfried Köhler).
- Avoiding setting the video stream type to 2 if the vpid is 0 (problem reported
by Arthur Konovalov).
- Implemented handling the "Content Descriptor" (based on a patch from Rolf
Ahrenberg). The 'classic', 'sttng' and 'curses' skins display the textual
representation of the content descriptors as "genre". The epg.data file stores
the genre using the tag character 'G'.
- Implemented handling the "Parental Rating Descriptor" (based on a patch from Rolf
Ahrenberg). The 'classic', 'sttng' and 'curses' skins display the parental
rating (if given) in their event displays. The epg.data file stores
the parental rating using the tag character 'R'.
IMPORTANT NOTE: if VDR doesn't display a parental rating, this does not
necessarily mean that the given programme is suitable for all audiences!
- Rearranged cEvent members to minimize memory waste.
- After a CLRE command, no further EPG processing is now done for 10 seconds,
so that data sent with subsequent PUTE commands doesn't interfere with data
from the broadcasters (suggested by Helmut Auer).
- Added support for DVB cards with multiple fontends. Note that this only
works for DVB cards where each frontend can be used independently of all
the others on the same adapter.
- Fixed plugin arguments corruption with glibc 2.11 on x86_64 (thanks to
Anssi Hannula).
|
|
- The name of the function cDevice::GetVideoSize() wasn't very well chosen
for its purpose of defining the optimum size of the OSD for the current
output device. Therefore a new function named cDevice::GetOsdSize() has
been introduced (suggested by Rolf Ahrenberg). Plugin authors should
implement this function in classes derived from cDevice, if they are able
to replay video. cDevice::GetVideoSize() still exists and should return the
actual size of the video material that is currently replayed. Note that
because of the many possible aspect ratios for video material, the type
of the Aspect parameter of GetVideoSize() has been changed to 'double',
and the Aspect parameter in both functions is named differently, because
it returns different values (suggested by Reinhard Nissl).
Thanks to Oliver Endriss for his input on calculating the Aspect factor in
GetOsdSize().
- Fixed the way the OSD size is determined on full featured DVB cards (thanks
to Oliver Endriss).
- Increased MAXOSDHEIGHT to 1200 (suggested by Nicolas Huillard).
- Removed limitation to PAL resolution from SPU handling.
- Checking fd_video in cDvbDevice::GetVideoSize() to avoid error messages on
systems with no real primary replay device (reported by Martin Neuditschko).
- Added a note to cTsToPes::GetPes() about having to call it repeatedly, once
it has returned a non-NULL value.
- Added MPEG 1 handling to remux.c (thanks to Ales Jurik).
- Fixed use of time_t in cEIT::cEIT() (thanks to Tobias Bratfisch).
- Added missing update of lastOsdSizeUpdate.
- EIT events are now only processed if a plausible system time is available, to
avoid wrong handling of PDC descriptors (thanks to Tobias Bratfisch).
- Removed unused 'synced' member from cTsToPes (reported by Christoph Haubrich).
- Added a note to cTsToPes about all TS packets having to belong to the same PID,
and that for video data GetPes() may only be called if the next TS packet that
will be given to PutTs() has the "payload start" flag set (suggested by Christoph
Haubrich).
- Added a note about the meaning of PERCENTAGEDELTA in cRingBuffer::UpdatePercentage()
(thanks to Rolf Ahrenberg).
- The new setup option "Recording/Pause key handling" can be used to define
what happens if the Pause key on the remote control is pressed during
live tv (thanks to Timo Eskola).
- Added a note about cFont::GetFont() not being thread-safe.
- Fixed generating PAT/PMT version numbers in case the PIDs change during
recording (reported by Reinhard Nissl).
- Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk).
- Fixed a memory leak when reaching the end of a recording during replay (reported
by Reinhard Nissl).
- Fixed calling close(-1) in cUnbufferedFile::Close() (reported by Reinhard Nissl).
- Added a workaround for the broken linux-dvb driver header files (based on a patch
from Tobias Grimm).
- Fixed handling the length of DiSEqC command sequences (reported by Reinhard Nissl).
- Fixed cOsdMenu::Display() in case the menu size has changed (thanks to
Reinhard Nissl).
- Added some missing 'const' keywords to avoid compilation errors with gcc 4.4
(thanks to Ville Skyttä and Ludwig Nussel).
- Modified cSVDRP::CmdGRAB() to avoid writing into const data (reported by
Ludwig Nussel).
- Fixed calculating menu colum widths in case the font has a size other than the
default size (reported by Reinhard Nissl).
- Added a plausibility check for the OSD percentage parameters
to avoid problems in case the values are stored in the setup.conf
file in a wrong way.
- Fixed variable types in cIndexFile (reported by Udo Richter).
|
|
- The new function cDevice::GetVideoSize() returns the size and aspect ratio
of the video material currently displayed. This function is used to determine
the proper size of the OSD. Plugin authors should implement this function in
classes derived from cDevice, if they are able to replay video.
- The OSD and font sizes are now defined in percent of the actual video display
size. The maximum OSD size has been raised to 1920x1080, to allow full
screen OSD on HD systems.
- The OSD size is now automatically adjusted to the actual video display
(provided the output device implements the GetVideoSize() function).
- cFrameDetector::Analyze() now syncs on the TS packet sync bytes (thanks to
Oliver Endriss for reporting broken index generation after a buffer overflow).
|
|
- Fixed a hangup when replaying a TS recording with subtitles activated (reported
by Timo Helkio).
- Fixed handling the 'new' indicator in the recordings menu for TS recordings
(thanks to Derek Kelly).
- Added cap_sys_nice to the capabilities that are not dropped (thanks to Rolf
Ahrenberg).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Added cRecordingInfo::GetEvent() (thanks to Marcel Unbehaun).
- Improved synchronizing the progress display, trick modes and subtitle display
to the actual audio/video. This now works independent of any buffer sizes the
output device might use.
+ The cBackTrace class has been replaced with cPtsIndex, which keeps track
of the PTS timestamps of recently played frames.
+ cDevice::GetSTC() is now required to deliver the STC even in trick modes.
It is sufficient if it returns the PTS of the most recently presented
audio/video frame.
+ The full-featured DVB cards need an improved firmware in order to return
proper STC values in trick modes (thanks to Oliver Endriss for enhancing the
av7110 firmware).
- Adapted cFrameDetector::Analyze() to HD NTSC broadcasts that split frames over
several payload units (thanks to Derek Kelly for reporting this and helping in
testing).
- Modified cFrameDetector::Analyze() to make it process whole frames at once, so
that file I/O overhead is minimized during recording (reported by Günter
Niedermeier).
- Added command line help for the '-i' option.
- Fixed cDvbPlayer::NextFile() to handle files larger than 2GB (thanks to Jose
Alberto Reguero).
- Improved replay at the begin and end of a recording. The very first and very last
frame is now sent to the output device repeatedly until GetSTC() reports that it
has been played. cDvbPlayer::Action() no longer calls DeviceFlush() (thanks to
Reinhard Nissl for making sure vdr-xine no longer needs this).
- Added missing '[]' to the delete operator in cMenuEditStrItem::~cMenuEditStrItem().
- Added missing virtual destructor to cPalette.
- Now freeing configDirectory before setting it to a new value in
cPlugin::SetConfigDirectory().
- Fixed a crash when jumping to an editing mark in an audio recording.
- Fixed the 'VideoOnly' condition in the PlayPes() and PlayTs() calls in
cDvbPlayer::Action() (thanks to Reinhard Nissl).
- cDevice::PlayTs() now plays as many TS packets as possible in one call.
- Making sure any floating point numbers written use a decimal point (thanks to
Oliver Endriss for pointing out a problem with the F record in the info file of
a recording).
- Fixed detecting the frame rate for radio recordings.
- Added missing AUDIO_PAUSE/AUDIO_CONTINUE calls to cDvbDevice (thanks to Oliver
Endriss).
- No longer writing the video type into channels.conf if VPID is 0 (thanks to
Oliver Endriss for reporting this).
- Improved efficiency of cEIT::cEIT() (thanks to Tobias Bratfisch).
|
|
- Removed the '#define FE_CAN_2ND_GEN_MODULATION', since it was wrong and the
flag is now in the driver, anyway.
- The full-featured DVB cards are now given the TS data directly for replay
(thanks to Oliver Endriss for enhancing the av7110 driver to make it replay
TS data). The patch from ftp://ftp.cadsoft.de/vdr/Developer/av7110_ts_replay__1.diff
implements this change in the driver.
The patch av7110_v4ldvb_api5_audiobuf_test_1.diff mentioned in version 1.7.2
is still necessary to avoid audio and video glitches on some channels.
- Added a typecast in cUnbufferedFile::Write() to avoid an error message when
compiling on 64 bit systems.
- Added some missing 'const' statements to cBitmap (thanks to Andreas Regel).
- Fixed returning complete PES packets in cTsToPes::GetPes() (thanks to Reinhard
Nissl).
- Added a missing Detach() in cTransfer::Activate() (thanks to Marco Schlüßler).
- Added clearing the TS buffers in cDevice::Detach() (thanks to Marco Schlüßler).
- Fixed incrementing the continuity counter in cPatPmtGenerator::GetPmt() (thanks
to Johann Friedrichs).
- Fixed removing deleted recordings in case there is a problem. Once a recording
caused a problem with removing, no others were removed any more and an ongoing
recording could fill up the disk and cause other recordings to be deleted
automatically (reported by Reinhard Nissl).
- Added "DEFINES += -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE"
to Make.config.template (thanks to Johann Friedrichs for pointing this out).
Plugin authors should add this line to their Makefile or Make.config if they use
file access functions that need special versions for 64 bit offsets.
- The new command line option -i can be used to set an "instance id", which will
be used to distinguish recordings of the same broadcast made by different instances
of VDR (suggested by Frank Schmirler). This replaces the use of the "resume id"
that was introduced in version 1.7.3.
- Added checking mutexCurrentAudioTrack to cDevice::PlayTs() (thanks to Reinhard
Nissl for pointing this out).
- Fixed handling the pointer field in cPatPmtParser::ParsePmt() (thanks to Frank
Schmirler - sorry I swapped two lines when adopting the original patch).
- Checking the remaining packet length after processing the pointer field in
cPatPmtParser::ParsePat() and cPatPmtParser::ParsePmt() (suggested by Frank
Schmirler).
- Checking the pointer field in cPatPmtParser::ParsePmt() only in 'payload start'
packets (suggested by Frank Schmirler).
- Changed cPatPmtGenerator to make sure the PMT pid doesn't collide with any of
the actual pids of the channel.
- Fixed cDevice::PlayTsAudio() and made cDevice::PlayTsVideo() return 0 if
PlayVideo() didn't play anything.
- Added an 'int' typecast to calculations involving FramesPerSecond() to avoid
compiler warnings (reported by Winfried Koehler).
- Fixed detecting frames for pure audio recordings.
- Fixed editing PES recordings. The frame type in the index.vdr file generated for
the edited PES recording is set to 1 for I-frames and 2 for all others (P- and
B-frames). The exact frame type doesn't matter for VDR, it only needs to know if
it's an I-frame or not.
- The PAT/PMT is now only processed if its version changes (reported by Reinhard
Nissl).
- Fixed handling the maximum video file size (reported by Udo Richter).
- Improved fast-forward/-rewind for audio recordings. The actual data is now sent
to the output device, so that it can be replayed and thus cause the proper delay.
For pure audio recordings the audio is no longer muted in fast-forward/-rewind
mode, so that some orientation regarding the position within the recording is
possible. There may still be some offset in the replay position displayed by the
progress indicator when switching from fast-forward/-rewind to play mode, as well
as in the current position during normal play mode. This is due to the various
buffers between the player and the output device and will be addressed later.
Note the new function cDevice::IsPlayingVideo(), which is used to inform the
player whether there is video data in the currently replayed stream. If a derived
cDevice class reimplements PlayTs() or PlayPes(), it also needs to make sure this
new function works as expected.
|
|
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
- Fixed handling the 'pointer field' in generating and parsing PAT/PMT (thanks to
Frank Schmirler).
- Fixed handling modulation types for DVB-S transponders when processing the NIT.
- Changed cDvbDevice::GrabImage() to use V4L2 (thanks to Marco Schlüßler).
- Added a poll to cDvbDevice::PlayVideo() and cDvbDevice::PlayAudio() to avoid
excessive CPU load (this is just a makeshift solution until the FF DVB cards
can play TS directly).
- The recording format is now Transport Stream. Existing recordings in PES format
can still be replayed and edited, but new recordings are done in TS.
All code for recording in PES has been removed.
The following changes were made to switch to TS recording format:
+ The index file format has been changed to support file sizes of up to 1TB
(previously 2GB), and up to 65535 separate files per recording (previously
255).
+ The recording file names are now of the form 00001.ts (previously 001.vdr).
+ The frame rate is now detected by looking at two subsequent PTS values.
The "frame duration" (in multiples of 1/90000) is stored in the info.vdr
file using the new tag F (thanks to Artur Skawina for helping to get the
IndexToHMSF() calculation right).
+ Several functions now have an additional parameter FramesPerSecond.
+ Several functions now have an additional parameter IsPesRecording.
+ The functionality of cFileWriter was moved into cRecorder, and cRemux is
now obsolete. This also avoids one level of data copying while recording.
+ cRemux, cRingBufferLinearPes, cTS2PES and all c*Repacker classes have been
removed.
+ A PAT/PMT is inserted before every independent frame, so that no extra
measures need to be taken when editing a recording.
+ The directory name for a recording has been changed from
YYYY-MM-DD-hh[.:]mm.pr.lt.rec (pr=priority, lt=lifetime) to
YYYY-MM-DD-hh.mm.ch-ri.rec (ch=channel, ri=resumeId).
Priority and Lifetime are now stored in the info.vdr file with the new
tags P and L (if no such file exists, the maximum values are assumed by
default, which avoids inadvertently deleting a recording if disk space
is low). No longer storing Priority and Lifetime in the directory name
avoids starting a new recording if one of these is changed in the timer
and the recording is re-started for some reason.
Instead of Priority and Lifetime, the directory name now contains the
channel number from which the recording was made, and the "resume id" of
this instance of VDR. This avoids problems if several VDR instances record
the same show on different channels, or even on the same channel.
The '-' between channel number and resumeId prevents older versions of
VDR from "seeing" these recordings, which makes sure they won't even try
to replay them, or remove them in case the disk runs full.
+ The semantics of PlayTs*() have been changed. These functions are now
required to return the given Length (which is TS_SIZE) if they have
processed the TS packet.
+ The files "index", "info", "marks" and "resume" within a TS recording
directory are now created without the ".vdr" extension.
+ The "resume" file is no longer a binary file, but contains tagged lines
to be able to store additional information, like the selected audio or
subtitle track.
+ cDevice::StillPicture() will now be called with either TS or PES data.
+ cDvbPlayer::Goto() no longer appends a "sequence end code" to the data.
If the output device needs this, it has to take care of it by itself.
- Fixed cPatPmtParser::ParsePmt() to reset vpid and vtype when switching from
a video to an audio channel (thanks to Reinhard Nissl).
- cDvbDevice now uses the FE_CAN_2G_MODULATION flag to determine whether a device
can handle DVB-S2. The #define is still there to allow people with older drivers
who don't need DVB-S2 to use this version without pathcing.
|
|
- Added a note about 'Id' being obsolete to the description of cDevice::PlayAudio().
- Switched to the new S2API driver API, which was decided to become the official
DVB API in the kernel (based on patches from Igor M. Liplianin, Niels Wagenaar
and Edgar Hucek). VDR now uses the S2API driver from http://linuxtv.org/hg/v4l-dvb.
In order to correctly detect DVB-S2 capable devices, you need to apply the patch
from ftp://ftp.cadsoft.de/vdr/Developer/v4l-dvb-s2api-add-s2-capability.diff to
the driver source, because the S2API doesn't provide a way of telling whether a
device can handle DVB-S2 transponders.
- The cDvbTuner::IsTunedTo() function now also checks the symbol rate in case of
DVB-S and DVB-C.
- Improved handling PES video packets with zero length when converting from TS to PES.
For good replay in Transfer Mode on full featured DVB cards you may want to apply
the patch from ftp://ftp.cadsoft.de/vdr/Developer/av7110_v4ldvb_api5_audiobuf_test_1.diff
to the driver (thanks to Oliver Endriss).
|
|
- Adapted the tuning code to the new DVBFE_SET_DELSYS API (thanks to Reinhard Nissl).
VDR now uses the driver from http://jusst.de/hg/multiproto_plus.
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Removed obsolete $(NCURSESLIB) from the Makefile.
- Implemented handling the standard component descriptor for AC3 (stream=4), as it
will soon be used by the German ARD channels (thanks to Michael Pennewiß for
advance information about this change). The previously used "Premiere pseudo
standard" (stream=2, type=5) still works, but has apparently been wrongfully used
by broadcasters from the beginning.
- Added missing description of the 'S' channel parameter to vdr.5 (reported by
Reinhard Nissl).
- The SVDRP signon message now indicates the character encoding in use, as in
"220 video SVDRP VideoDiskRecorder 1.7.1; Fri May 2 16:17:10 2008; ISO-8859-1".
This may be useful for instance for external tools that provide EPG data, so that
they can correctly encode the strings.
- No longer calling FcFini() to avoid problems with older (broken) versions of
fontconfig (suggested by Edgar Toernig).
- Removed the compile time option VFAT to allow users of precompiled binary
distributions to have full control over whether or not to use the --vfat option
at runtime (suggested by Michael Nork).
- First step towards switching to TS (Transport Stream) as recording format:
+ The new function cDevice::PlayTs() is used to play TS packets.
+ The new functions cDevice::PlayTsVideo() and cDevice::PlayTsAudio()
are used to play video and audio TS packets, respectively.
+ The new function cAudio::PlayTs() is used to play audio TS packets.
+ The new class cPatPmtGenerator is used to generate a PAT/PMT pair that precedes
the TS data in Transfer Mode.
+ The new class cPatPmtParser is used by cDevice to parse the PAT/PMT data in a
TS in order to find out which streams it contains.
+ The new class cTsToPes is used to convert TS packets to a PES packet.
+ cTransfer no longer uses cRemux, and doesn't run a separate thread any more.
It just generates a PAT/PMT and sends all received TS packets to the primary
device's PlayTs().
+ Live subtitle display no longer uses a ring buffer and separate thread.
+ cPesAssembler has been removed. Old VDR recordings only contain complete PES
packets.
+ Since a TS needs to have a PAT/PMT, which requires the video stream type to
be explicitly given, the format of the VPID field in the channels.conf file
and the SVDRP commands NEWC/MODC/LSTC has been extended. The video stream type
now follows the VPID and optional PPID, separated by an '=' sign.
- Updated the sources.conf file (thanks to Oleg Roitburd).
- Fixed a possible integer overflow in GetAbsTime() (thanks to Alexander Rieger).
- Fixed a problem with calling isyslog() from within the SignalHandler() (thanks
to Udo Richter).
- Replaced the Finnish language code "smi" with "suo" (thanks to Rolf Ahrenberg).
- Fixed wrong value for TableIdBAT in libsi/si.h (thanks to Winfried Köhler).
- Errors in config files no longer keep VDR from starting.
- Removed unneeded include files <linux/dvb/dmx.h> und <time.h> from remux.h
(reported by Tobias Grimm).
|
|
- Re-implemented handling of DVB-S2, which first appeared in version 1.5.14, but was
revoked in version 1.5.15 in favor of making a stable version 1.6.0. VDR now
requires the "multiproto" DVB driver, e.g. from http://jusst.de/hg/multiproto.
Note that the channels.conf file now supports additional parameters, so you may
want to make sure you have a backup of this file in case you need to go back to
the previous version of VDR!
- Fixed displaying transponder data when it is modified (thanks to Reinhard Nissl).
- Fixed handling the counter in detection of pre 1.3.19 PS data (thanks to Reinhard
Nissl).
- Improved logging system time changes to avoid problems on slow systems under
heavy load (suggested by Helmut Auer).
- Now setting the thread name, so that it can be seen in 'top -H' (thanks to Rolf
Ahrenberg).
- Fixed initializing the timer's flags in the cTimer copy constructor (thanks to
Andreas Mair).
- Fixed setting the OSD level in the 'osddemo' example (thanks to Wolfgang Rohdewald).
- Increased the time between checking the CAM status to 500ms to avoid problems
with some CAMs (reported by Arthur Konovalov).
|
|
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Added option -i to the pictures plugin's pic2mpg to ignore unknown file types.
- Revoked the switch to the "multiproto" driver in order to make a new stable
version before making this big switch and forcing all users to install a
driver that is not yet in the kernel source. The removed code will reappear
in version 1.7.0.
Note that you may need to switch back to an older version of your channels.conf
file if you have already used version 1.5.14, because it introduced new parameters.
- Added the new command line option --userdump to enable core dumps in case VDR
is run as root with option -u (thanks to Hans-Werner Hilse).
- Speeded up anti-aliased font rendering by caching the blend indexes (based on
a suggestion by Martin Wache).
- Fixed setting the OSD area in the pictures plugin.
- Ignoring "repeat" and "release" keys in the time search entry mode during replay,
to avoid inadvertently leaving it in case a key is pressed too long (suggested
by Andreas Brugger).
- Improved sending all frames to devices that can handle them in fast forward
trick speeds, including subtitles (thanks to Timo Eskola).
- The section handler is now stopped before the device is destroyed, to avoid
accessing file handles after they have become invalid (thanks to Reinhard
Nissl for reporting an invalid access when ending VDR, and to Deti Fliegl for
a patch that was used to implement StopSectionHandler()).
- Fixed setting the date in the channel display of the classic and sttng skins,
to avoid unnecessary OSD access (thanks to Marco Schlüßler).
- The free disk space is now also displayed in the title of the "Recordings"
menu (suggested by Walter Koch).
- Changed the message "Upcoming VPS recording!" to "Upcoming recording!" because
it applies to non-VPS recordings as well.
- Fixed a loss of a timer's 'recording' flag after modifying it via MODT.
- Fixed detecting directories in cFileNameList::Load().
- Running the thread that removes deleted recordings at a low priority to (maybe)
avoid stuttering replay in case the thread is run during replay.
- Limiting the length of the recording name in timers in case VDR is run with
--vfat, in order to avoid names that are too long for Windows (suggested by Rolf
Ahrenberg).
- Using cString::sprintf() instead of asprintf() (thanks to Wolfgang Rohdewald
for pointing out a possible problem if the return value is not checked).
Plugin authors may want to consider doing the same. For convenience there is now
an additional version of cString::sprintf() that accepts a va_list parameter.
- When deleting the recording that is currently replayed, the replay is now
stopped immediately (thanks to Mikko Matilainen for reporting a possible crash
if the Info key is pressed after deleting the currently replayed recording).
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
- When determining the amount of free disk space, any deleted (but not yet removed)
recordings on different file systems (that are mounted under the video directory)
are no longer taken into account.
- When running out of disk space during a recording, only such deleted or old
recordings are removed, that actually are on the video directory file system(s).
This prevents VDR from accidentally deleting recordings on other file systems,
which would not add any free space to the video directory.
- Implemented the cStatus, cDevice and cPlayer functions for setting subtitle tracks
in plugins (thanks to Petri Hintukainen).
- Added cStatus::TimerChange() to inform plugins about changes to the list of timers
(based on a patch from Benedikt Elser).
- Added new cStatus functions to the 'status' plugin.
- Added missing #include <limits.h> to epg.c and menuitems.h (thanks to Ville Skyttä).
- The new function cSkin::SetScrollbar() can be implemented by skins to display
a scrollbar in every list menu. The 'classic' and 'sttng' skins have been
changed accordingly, as well as the 'skincurses' plugin.
- Introduced 'operator const void * ()' in cString to catch cases where operator*()
should be used.
- Fixed calculating the scrollbar sizes in the skins.
|
|
- Fixed the Play function in the pictures plugin.
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Updated the Makefile of the skincurses plugin (thanks to Rolf Ahrenberg).
- The new option --localedir can be used to set the locale directory at runtime
(based on a patch from Stefan Huelswitt).
- Fixed finding new transponders (thanks to Winfried Köhler).
- Implemented handling of DVB-S2 (thanks to Marco Schlüßler and Reinhard Nissl
for a patch that was used to implement this). VDR now requires the "multiproto"
DVB driver, e.g. from http://jusst.de/hg/multiproto.
- Removed switching to the next higher or lower channel if the current channel
is not available, in order to allow staying on an encrypted channel that takes
a while for the CAM to start decrypting.
|
|
- Implemented handling DVB subtitles (thanks to Marco Schlüßler, and also to
Pekka Virtanen for writing the subtitle plugin, which helped in implementing
subtitle handling in VDR).
- The new remote control key "Subtitles" can be used to bring up the list
of available subtitles.
- The new setup option "DVB/Subtitle languages" can be used to define the
preferred languages for subtitles.
- Fixed selecting the audio track when pressing Ok in the Audio menu (thanks
to Marco Schlüßler).
- Implemented display of DVB subtitles in live viewing mode.
- Implemented subtitle track selection.
- Implemented bitmap color reduction and shrinking to display subtitles even
on devices that can't display the necessary number of colors.
- Added compatibility mode for playback of recordings made with the subtitles
plugin (with some help from Rolf Ahrenberg).
- The new setup option "DVB/Subtitle offset" can be used to shift the location
of the subtitles in the vertical direction.
- The new setup options "DVB/Subtitle foreground/background transparency"
define an additional level of transparency for the foreground and background
color of subtitles.
- Existing recordings made with the subtitle plugin can be given an 'X' record
in their info.vdr file, so that subtitles can be automatically selected upon
replay, according to the preferred language setup, as in
X 3 03 ger deutsch
(see vdr.5). Note that these entries need to be added in the proper sequence,
so that they correspond with the actual track languages in the recording.
- Now generating translation files without line numbers to avoid unnecessarily
large diffs. Plugin authors may want to replace the -F option with
--no-location in the xgettext and msgmerge calls in their Makefiles.
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added a missing Channels.SetModified(true) call when deleting or moving a
channel in the Channels menu (reported by Halim Sahin).
- Fixed a missing '-' at the next to last line of SVDRP help texts (reported by
Denis Knauf).
- Added a missing SetVolumeDevice() call in cDevice::SetPrimaryDevice() (reported
by Reinhard Nissl).
- Fixed a crash when pressing Left while at the first character of a cMenuEditStrItem
(thanks to Christian Wieninger).
- Only creating a new cDvbOsdProvider in cDvbDevice::MakePrimaryDevice() if 'On'
is true (i.e. this device is being made the primary device).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Fixed handling reallocated memory in cCharSetConv::Convert() (reported by Udo
Richter).
- Fixed a new[]/delete mismatch in cMenuEditStrItem::LeaveEditMode() (thanks to
Udo Richter).
- Implemented sending all frames to devices that can handle them in fast forward
trick speeds (thanks to Timo Eskola).
- Updated the Hungarian language texts (thanks to Thomas Günther).
- Fixed description of DeviceSetAvailableTrack() and cReceiver(), and added an
example ~cMyReceiver() in PLUGINS.html (thanks to Marco Schlüßler).
- Improved the description of where logging goes in the INSTALL file (thanks to
Elias Luttinen).
- Added a note about how to initiate internationalization support to the
README.i18n file. The Makefile generated by the 'newplugin' script now has the
'i18n' target automatically create an initial 'po/pluginname.pot' file.
Plugin authors may want to add the '$(I18Npot)' dependency to the 'i18n'
target in their Makefiles, as in
i18n: $(I18Npot) $(I18Nmo)
(based on a suggestion by Torsten Kunkel).
- Removed a duplicate ',' from the ca_ES.po file (thanks to Thomas Günther).
- Added the 'ß' character to the "allowed characters" in the de_DE.po file
(suggested by Thomas Günther).
- Made the default copy ctor of cRecording private (thanks to Markus Hahn).
Same for the assign operator.
- Added cRecording::Undelete() (based on a patch from Markus Hahn).
- Added cDevice::CloseFilter() to allow a device to have complete control over
both opening and closing section filters (thanks to Rolf Ahrenberg).
- Some fixes to PLUGINS.html (thanks to Rolf Ahrenberg).
|
|
- Added missing install-i18n to the install target in the Makefile (reported
by Joachim Wilke).
- Fixed a faulty comment in Make.config.template (reported by Marco Schlüßler).
- Improved i18n-to-gettext.pl (thanks to Matthias Schwarzott).
- Moved the "all" target in plugin Makefiles before the "Implicit rules",
so that a plain "make" will compile everything (suggested by Matthias
Schwarzott). The "newplugin" script has been changed accordingly.
Plugin authors may want to change their Makefiles, too.
- Added DESTDIR and PREFIX handling to the Makefile (thanks to Matthias
Schwarzott).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added internationalization to the "skincurses" plugin (thanks to Rolf
Ahrenberg).
- Checking the string for NULL in I18nTranslate().
- Updated the French OSD texts (thanks to Bruno Roussel).
- Some optimizations in cDvbDevice::SetChannelDevice() (thanks to Tobias Bratfisch).
- Optimized cMenuEditChrItem::Set() (thanks to Tobias Bratfisch).
- Optimized cNitFilter::Process() (thanks to Tobias Bratfisch).
- Reduced the number of time(NULL) calls in vdr.c's main loop to a single call
(thanks to Tobias Bratfisch).
- Changed cBitmap::DrawText() to always draw the background unless ColorBg
is clrTransparent (thanks to Christoph Haubrich).
- The "Setup/OSD/Language" menu now only shows those languages that actually
have a locale (suggested by Anssi Hannula).
- Now using setenv() instead of setlocale() to set the language for gettext()
(suggested by Anssi Hannula; thanks also to Ludwig Nussel for a hint on using
_nl_msg_cat_cntr).
- When scanning the locale directory, VDR now explicitly looks for a file named
vdr.mo. Text files for plugins are now named "vdr-name.mo", when "name" is the
name of the plugin. The "newplugin" script has been changed accordingly, and
plugin authors should change their Makefiles, too.
|
|
- Added cDevice::HasCi() so that devices with Common Interface can be avoided
when tuning to an FTA channel, thus preserving the CAM resources even on budget
DVB cards (suggested by Petri Helin).
- Fixed i18n characters for the Hungarian texts (thanks to Thomas Günther).
- Now using cPipe instead of popen() in cCommand::Execute() to avoid problems
with open file handles when starting background commands (thanks to Reinhard
Nissl).
- Removed 'assert(0)' from cDvbSpuDecoder::setTime() (thanks to Marco Schlüßler).
- Fixed a possible crash when loading an invalid XPM file (thanks to Martin Wache).
- Updated satellite names in 'sources.conf' (thanks to Thilo Wunderlich).
- Adapted 'libsi' to DVB-S2 (thanks to Marco Schlüßler).
- Fixed handling error status in cDvbTuner::GetFrontendStatus() (thanks to
Reinhard Nissl).
- Shutdown handling has been rewritten (thanks to Udo Richter).
- Plugins can now implement the new function WakeupTime() to request VDR to wake
up at a particular time (thanks to Udo Richter).
- The HUP signal now forces a restart of VDR (thanks to Udo Richter).
- cThread::EmergencyExit() has been replaced by ShutdownHandler.RequestEmergencyExit().
- Several references to "button" in a remote control context have been changed
to "key" (based on a report from Marko Mäkelä regarding the "Menu button closes"
text). The "MenuButtonCloses" parameter in 'setup.conf' has therefore been
renamed to "MenuKeyCloses", accordingly. This will result in an "unknown config
parameter: MenuButtonCloses" error message in the log file, so you may want to
remove that entry from your 'setup.conf' file.
- Simplified the error handling in cDvbTuner::GetFrontendStatus() (based on a
discussion with Reinhard Nissl).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Increased the maximum number of DVB devices to 8 (thanks to Rolf Ahrenberg).
- The new Setup parameter "Channel entry timeout" can be used to customize the time
since the last keypress until a numerically entered channel number is considered
complete, and the channel is switched (suggested by Helmut Auer). Setting this
parameter to 0 turns off the automatic channel switching, and the user will
have to confirm the entry by pressing the "Ok" key.
|
|
- The CAM handling has been refactored. Instead of a cCiHandler per device there
is now an abstract cCiAdapter and a cCamSlot. This allows each slot to be
accessed individually.
- The general 15 seconds workaround time before opening the CAM menu has been
removed. If the CAM menu doesn't open within a timeout, the enter menu command
is now sent again.
- If a CAM is reset or pulled and reinserted, it now automatically starts
decrypting the current channel again.
- The Setup/CAM menu now dynamically refreshes its items and displays whether
a CAM is present or ready. The 'Reset' function no longer leaves the menu.
- The CAM menu will now be openend when pressing the Ok key on a slot entry.
- The CAM menu now stays within the current menu context and doesn't close and
reopen the menu every time an option is selected.
- When an encrypted channel is switched to for the first time, VDR now checks
explicitly whether a CAM can actually decrypt that channel. If there is more
than one CAM in the system that claims to be able to decrypt the channel,
they are all tried in turn.
To make this possible, an encrypted channel needs to be received in Transfer
Mode when it is switched to for the first time, so that VDR can determine
whether the TS packets are actually decrypted. Once a channel is known to
be decrypted by a particular CAM, the next time it is switched to it will
be shown in normal live viewing mode.
- A cDevice now automatically detaches all cReceiver objects that receive PIDs
that can't be decrypted with the current CAM. A plugin that attaches a cReceiver
to a device should therefore watch the receiver's IsAttached() function to
see if it is still attached to the device.
- The cReceiver constructor no longer takes an 'int Ca' as its first parameter,
but rather a 'tChannelID ChannelID'. This is necessary for the device to be
able to determine which CAM a particular channel can be decrypted with. If the
channel is known to be unencrypted, or a plugin doesn't want to provide the
channel id for other reasons, an invalid tChannelID() can be given.
- The cThread::Start() function now waits until a previous incarnation of this
thread has actually stopped. Before this it could happen that a thread's
Cancel(-1) function was called and immediately after that it was started again,
but the Start() function still found it to be 'active'.
- The parameter NeedsDetachReceivers in cDevice::GetDevice(const cChannel *Channel, ...)
has been removed. A call to this function will automatically detach all receivers
from the device if it returns a non-NULL pointer.
- The cTimeMs class now accepts an initial timeout value in its constructor.
- A CAM is now explicitly instructed to stop decrypting when switching away from
an encrypted channel.
- If the CAM in use can decrypt several channels at the same time, VDR can
now make use if this capability. Whether or not a CAM can decrypt more
than one channel is determined by sending it an initial empty QUERY command
and testing whether it replies to it.
- Ca values in the range 0...F in channels.conf can still be used to assign a channel
to a particular device, but this will no longer work with encrypted channels because
without valid CA ids VDR can't decide which CAM slot to use. However, since VDR now
automatically determines which CAM can decrypt which channel, setting fixed
channel/device relations should no longer be necessary.
IF AN ENCRYPTED CHANNEL CAN'T BE DECRYPTED AND YOU HAVE A CA VALUE IN THE RANGE
0...F FOR THAT CHANNEL, SET IT TO 0 (FTA) AND TUNE TO THE CHANNEL AGAIN.
|
|
- Replaced the "quick workaround for additional live audio PIDs" in
cDvbDevice::SetChannelDevice() with an actual solution in
cDvbDevice::SetAudioTrackDevice() in order to prevent sticky PIDs in CAMs,
which caused long switching times or completely blank screens when switching
between encrypted channels on the same transponder (reported by Tomas Berglund).
- Adapted cThread::ThreadId() to recent kernels (thanks to Ville Skyttä).
- Added --remove-destination to the 'cp' command for binaries in the Makefile to
avoid a crash in case a new version is installed on a running system (suggested
by Petri Hintukainen).
- Fixed handling "Ca Info" in case the CAM sends this again if the smart card is
replaced with a different one.
|
|
- Changed the log messages when grabbing an image from 'isyslog()' to 'dsyslog()'
so that they can be suppressed in normal operation mode to avoid clogging the
log file in case this function is used frequently (suggested by Helmut Auer).
|
|
- Fixed the PremiereContentTransmissionDescriptor in 'libsi' (thanks to Stefan
Huelswitt).
- Removed all the compatibility '#if APIVERSNUM...' stuff and instead increased
the API version number - plugins will have to be recompiled.
- Removed the call to pthread_setschedparam(childTid, SCHED_RR, 0) in thread.c,
because it caused a compiler warning with post-2.4 glibc (reported by Ville Skyttä).
Since the third parameter has to be non-null to have any effect, the call was
presumably a NOP, anyway.
- Fixed the 'clean-plugins' target in the Makefile to also remove additional
plugin libraries (thanks to Wayne Keer).
- Applied the fixes to moving and deleting channels from version 1.4.0-2 to the
SVDRP commands MOVC and DELC as well.
- Fixed handling the display of the '*' indicator in the "What's on now/next?"
menu, so that events that haven't been "seen" in the data stream within 30
seconds won't be shown as "running".
- Fixed handling tabbed item display in 'skincurses'.
- Increased the column spacing in the "Recordings" menu (was too small for the
'skincurses' plugin).
- When the 'skincurses' plugin is loaded, it automatically sets the 'curses'
skin as the current one. This doesn't modify the Setup.OSDSkin parameter, so
that after using 'skincurses' (for instance for debugging) the previously
selected skin will be used again.
- Added some log messages when setting the current skin.
- Only making a second attempt to set the current skin at startup if the first
attempt has failed.
- Now switching to non-VPS timers' channels 60 seconds before the timer starts
(if a free device is available), to allow for the updating of EPG data and CA
descriptors before the actual recording starts.
|
|
- Removed leftover LSMOD=... line from 'runvdr'.
- Modified the Makefile to copy additional libraries a plugin might provide (suggested
by Wayne Keer). See PLUGINS.html for details.
- Fixed handling Transfer Mode when replaying Dolby Digital audio and the option
'-a' was given (based on a patch from Werner Fink). To avoid having to increment
the API version, several #if checks have been introduced around this. These will
be removed once the API version actually needs to be incremented.
- Fixed deleting the 'skinDescriptions' in cMenuSetupOSD::~cMenuSetupOSD() (thanks
to Tobias Grimm).
- Fixed calculating the start time of repeated timers with "first day" (thanks to
Udo Richter).
- Now setting a timer's cached start time to 0 after a call to Skip() (thanks to
Udo Richter).
- Fixed handling the running status of EPG events in case the "Schedule" menu is
currently open (i.e. a write lock on the schedules data can't be achieved).
- Fixed handling VPS timers in case the EPG event hasn't been 'seen' in a while.
- Fixed calculating the cache size in cUnbufferedFile::Read() (thanks to Artur Skawina).
- Removed -fPIC from VDR's and libsi's Makefile (suggested by Prakash Punnoor).
- Modifed the device selection to better handle timer conflicts (reported by
Christian Wieninger).
- Avoiding a compiler warning in libsi's TypeLoop::operator[].
- Now processing the "frequency list descriptor" (based on a patch from Anssi Hannula).
- Improved the repeat function for LIRC remote controls (thanks to Joerg Riechardt).
- Fixed moving channels, which sometimes stopped the current replay session
(reported by Mirko Dölle).
- Fixed deleting channels in case the current channel's number changes (reported
by Mirko Dölle).
|
|
- Fixed handling broken PMT records (thanks to Marcel Wiesweg for pointing out how
to detect these).
- Added a missing "Button$" for the Timer button and "Key$" in skinclassic.c
(thanks to Rolf Ahrenberg).
- Fixed broken entry 'A111.1W' in sources.conf (reported by Luca Olivetti).
- Replaced the obsolete entry 'S21.5E' in the default 'diseqc.conf' with 'S13.0E'
(reported by Ville Skyttä).
- Fixed learning keys when VDR is already running (thanks to Jurij Retzlaff).
- Fixed handling the system time transponder setting in the Setup/EPG menu, which
was broken by the min/max fix in cMenuEditIntItem.
- VPS timers now record only events that have exactly the given start time.
This fix also implements recording several subsequent events that have the
same VPS time (like a sports event with intermittent news breaks).
- When checking for timers that have entered the "VPS margin", any free devices are
now used to switch to the needed transponder. This improves cases where more than
one VPS timer is about to start.
- Fixed handling the VPS margin in case the event's duration is shorter than the
margin.
- Fixed handling VPS timers in case the primary device needs to switch to the
timer's transponder.
- Now avoiding the 'actual' device when starting a recording, so that a Transfer
Mode for live tv isn't interrupted.
- Fixed a typo in skins.h (thanks to Alexander Rieger).
- cSkins::QueueMessage() called from a background thread with an empty message
now clears all messages that have been previously queued by that thread and have
not yet beed displayed (thanks to Alexander Rieger).
- Fixed handling the color button texts when switching from the 'Schedule' menu of
a channel without EPG info to the 'What's on now' menu (reported by Rolf
Ahrenberg).
- cMenuEditIntItem and cMenuEditChanItem can now be given strings to label the
minimum and maximum values, and the case that no channel has been selected,
respectively.
- The initial channel and volume can now be defined in the "Setup/Miscellaneous"
menu (based on a patch from Thomas Keil).
- When hitting the end of a recording in fast forward mode, VDR no longer switches
back to normal speed if the recording is already finished (thanks to Reinhard
Nissl).
- No longer calling cPlugin::ProcessArgs() if VDR is run with the --help or
--version option, to avoid error messages from plugins (reported by Udo Richter).
- Now checking whether there is any text before calling cStatus::MsgOsdTextItem()
(reported by Joachim Wilke).
|
|
- Fixed updating the "Info" button in the "Timers" menu.
- Reduced the number of events to actually check when setting events to timers.
- cMenuEditIntItem now checks the given value and forces it to be between the
given min and max limits.
- The status changes of EPG events are now logged for all channels that have timers.
- Removed the log message "deleting plugin: ..." when shutting down VDR (thanks to
Christoph Haubrich for reporting that this is irritating when calling "vdr --help").
- Fixed cReadLine::Read() for lines that end with the infamous "\r\n" (thanks to
Rolf Ahrenberg).
- Fixed cDvbDevice::SetAudioBypass() in case setTransferModeForDolbyDigital is false
(thanks to Werner Fink).
- Updated 'sources.conf' (thanks to Oleg Roitburd).
- Fixed the shutdown timeout (thanks to Alexander Wenzel).
- Only calling RemoveEmptyVideoDirectories() once in case a recording has been
deleted (reported by Hardy Flor).
- Fixed deleting recordings that have been removed externally when running out of
disk space (reported by Jan Lenz).
- Fixed handling repeating VPS timers (they stopped recording too early).
- Timer log messages now show "VPS" if this is a VPS timer.
- Fixed getting the present EPG event in case none is currently 'running' (it
then returns the one that just ended).
- Fixed calling a plugin's main menu function while a message is being displayed
(reported by Helmut Auer).
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
- Made cMenuRecordings::GetRecording() 'protected' (suggested by Marius Heidenstecker).
- Speeded up cRemux::ScanVideoPacket() (thanks to Reinhard Nissl).
- Enhanced logging EPG event data.
- Fixed format string handling (thanks to Darren Salt).
- The new function cDevice::ForceTransferMode() can be used to force the primary
device into transfer mode (thanks to Reinhard Nissl).
- The 'version' of EPG events is now ignored when reading EPG data from 'epg.data'
or via SVDRP/PUTE to avoid problems with double EPG events.
- The 'running status' of EPG events is now only set to SI::RunningStatusNotRunning
for events before the present event.
- Fixed some #include sequences.
- Single shot VPS timers are now only considered 'expired' if their associated
EPG event has been explicitly set to SI::RunningStatusNotRunning.
- The check for timers to be deleted is now done only every 30 seconds.
|
|
- Removed an unnecessary toFile->SetReadAhead() from cutter.c (thanks to Artur
Skawina).
- The "Back" key now restores the original string when pressed while editing a
string item (suggested by Markus Hahn).
- Now stopping scanning the video directory if there are too many levels of
symbolic links, which might indicate a recursive link loop (based on a patch
from Helmut Auer).
- Improved OSD area handling in cDvbSpuDecoder (thanks to Marco Schlüßler).
- Now logging the description (if present) in case a thread is canceled (suggested
by Marco Schlüßler).
- cMenuText now uses the given font (thanks to Rolf Ahrenberg).
- The ST:TNG skin now uses the fixed font if requested when displaying texts.
- Fixed some typos in the CONTRIBUTORS file (thanks to Frank Krömmelbein).
- Changed offset and size handling in 'libsi' from 'unsigned' to 'signed', so that
overflows can be better detected (thanks to Marcel Wiesweg).
- Checking data size in CaDescriptor::Parse() and LinkageDescriptor::Parse() of
'libsi' to avoid crashes with invalid data (thanks to Marcel Wiesweg).
- Made CharArray::DataOwnData::assign() in 'libsi' more robust against invalid
data (suggested by Oliver Endriss). Also changed CharArray::DataOwnData::Delete()
so that it sets 'size' and 'data' to 0.
- Now resetting the channel number if the number entered through the numeric keys
exceeds the maximum channel number (thanks to Rolf Ahrenberg).
- The language code in the 'X' component records of EPG data can now consist of
two codes, separated by '+'.
- If a recording starts and there is no EPG data available for the recorded channel,
the 'X' audio component records for the 'info.vdr' file are now generated from the
channel's PID data.
- Externally provided EPG data (with table ID 0x00) now gets its component
descriptors set from the broadcast data, so that language codes and descriptions
are available (suggested by Andreas Brugger).
- When setting the audio track descriptions, the language codes are now also set
in case this is a replay session (based on a patch from Rolf Ahrenberg).
- If a recording starts and the channel's audio PID data has more language code
information than the EPG's component data, the code from the channel is taken.
- Fixed handling DPID when deciding whether to switch to 'Transfer Mode' (thanks
to Marco Schlüßler).
- Fixed replaying recordings of radio channels with many audio tracks (thanks to
Reinhard Nissl).
- Added a comment to tChannelID::nid, explaining that is is actually the "original"
network id.
|
|
- Removed leftover 'needsBufferReserve' variable from cTransfer (thanks to Marco
Schlüßler).
- Fixed setting "No title" for broken event data (reported by Ronny Kornexl).
- Fixed channel up/down switching on single card systems (reported by Stefan
Huelswitt).
- Fixed handling "pending" timers that blocked others that actually could record
(reported by Thomas Koch).
- Speeded up cVideoRepacker (thanks to Reinhard Nissl).
- Added an 'Id' parameter to cDevice::PlayAudio() to allow plugins to easier
process the audio data (thanks to Marco Schlüßler).
- Added Czech language texts (thanks to VladimÃr Bárta).
Plugin authors may want to add the new entries to their I18N texts and contact
the translators to have their texts translated. Note that there are now 21
different OSD languages, so please make sure you have 21 versions for each of
your texts.
- Updated the Polish OSD texts (thanks to Jaroslaw Swierczynski).
- Fixed auto advance in string entry fields when pressing Up/Down in insert mode
(reported by Udo Richter).
- Fixed handling the "Setup/OSD/Menu button closes" option when set to 'yes' in
case a replay is active (thanks to Udo Richter).
- Improved cUnbufferedFile; USE_FADVISE is now defined in tools.c by default, so
if you don't want to use "fadvise" you need to comment out that line (thanks to
Artur Skawina).
- Fixed a missing ',' in the Swedish OSD texts (thanks to Arthur Konovalov).
- cDevice::Transferring() can now be used to determine whether the (primary)
device is currently playing in Transfer Mode (based on a suggestion by
Reinhard Nissl).
- The 'runvdr' script no longer uses the $VDRUSR environment variable to set
the user id under which 'vdr' shall run. Just add the '-u username' option
when you call 'runvdr'.
- Fixed multiple entries of the same subdirectory in the "Recordings" menu
(reported by Christian Jacobsen).
- Enabled generating a core dump if VDR is run with a different user id (thanks
to Ville Skyttä).
- Fixed handling the "Blue" key in the "Schedule" menu for the current channel
(thanks to Rolf Ahrenberg).
- Renamed the Makefile target 'plugins-clean' to 'clean-plugins' (suggested by
Sebastian Frei).
- Made all font and image data 'const' (thanks to Darren Salt).
- Fixed scrolling with Up/Down in case there are non-selectable items at the
beginning or end of the menu (reported by Helmut Auer).
- Added cSkin::GetTextAreaWidth() and cSkin::GetTextAreaFont(), so that a plugin
that wants to do special text formatting can do so (thanks to Alexander Rieger).
|
|
- EPG events from epg.data or SVDRP's PUTE command now have their Title set to
"No Title" if none was set.
- Fixed checking toFile in cCuttingThread::Action() (found in a larger patch from
Artur Skawina).
- Fixed a crash when pressing '0' in the "Schedule" menu on a channel that doesn't
have any EPG data (reported ny Alexander Hans).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Fixed a missing ',' in the Greek OSD texts (thanks to Arthur Konovalov).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Fixed handling the tfRecording flag when reading timers (bug reported by Andreas
Mair).
- Now checking whether the channel exists before setting the PMT filter in
cPatFilter::Process() (thanks to Thomas Bergwinkl).
- Now trying to reestablish the connection to the LIRC daemon in case it breaks
(thanks to Ville Skyttä).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed channel switching with the Down (Up) key in case the current channel is
already the first (last) in the list (reported by Frank Krömmelbein).
- Removed the "buffer reserve" in Transfer Mode - it's no longer necessary with
recent driver/firmware versions.
- The epg.data file is now written when VDR exits (suggested by Daniel Karsubka).
- Fixed cTimers::GetNextActiveTimer() so that it won't return an expired timer
(reported by Rolf Ahrenberg).
- Changed DVBS_TUNE_TIMEOUT and DVBC_TUNE_TIMEOUT to 9000ms to avoid problems with
channels that have low symbol rates (reported by Suur Karu).
- Fixed displaying the current audio track in the channel display.
- When reading epg.data (or data from PUTE), the version number of events with
table IDs smaller than 0x50 is now ignored because otherwise the current
running status would not be set after a restart of VDR.
- Implemented a timeout for remote controls that don't deliver "repeat" keypresses
very fast (based on a suggestion by Luca Olivetti; problem with the new handling
of k_Repeat keypresses in channel switching reported by Udo Richter).
- When looking for the present or following EPG event, the running status is now
always taken into account.
- Now initializing the channels' schedule pointers when reading the epg.data file,
so that the first WhatsOn menu will come up faster.
- If a shutdown is requested, but the shutdown script doesn't actually halt the
system, it is now tried again after 5 minutes (suggested by Helmut Auer).
- Separated the 'install' target into several individual targets; renamed the
'plugins-install' target to 'install-plugins' (thanks to Helmut Auer).
|
|
- The SVDRP command LSTT now accepts the new option 'id' to have the channels
of the timers listed with their unique channel ids instead of their numbers
(suggested by Matthias Schniedermeyer).
- Added a missing #include <linux/unistd.h> to thread.c (thanks to Ville Skyttä).
- Fixed the "plugins-clean" and "plugins-install" targets in the Makefile (thanks
to Andreas Brachold).
- Fixed handling "more than 3 byte" key sequences in cKbdRemote::ReadKeySequence()
(thanks to Peter Bieringer). If you are using the PC keyboard as remote control
input you may need to make VDR newly learn the keys by removing the remote.conf
file.
- To avoid problems with access rights when VDR shall run as 'root' it now skips
all SetCaps() and SetUser() calls when it is started as 'root' and "-u root"
is given.
- Added missing i18n entry for the "Timer" button (thanks to Ville Skyttä)
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Making the "Menu" key behave consistently has not been well received by several
users, so the new option "Setup/OSD/Menu button closes" can be used to get the
old behavior back (which also is the default value of this option).
- Dropped the default vdr user. The program now always runs under the user id
it was started from, unless the '-u' option is given and it was started from
the 'root' user. If you want to have a default vdr user, you can activate and
adjust the "VDR_USER = vdr" line in your Make.config file (from the original
patch by Ludwig Nussel).
- Key macros can now be defined for all non-modeless keys (suggested by Mirko Dölle).
- Adjusted the "KEY MACROS" section of vdr.5 to the new plugin calling mechanism
introduced in version 1.3.32.
- Removed the now obsolete "ca.conf" section from vdr.1 (thanks to Ville Skyttä).
- Added missing description of L and R circular polarization to 'diseqc.conf'.
- Added a note about "modprobe capability" to INSTALL (suggested by Patrick Cernko).
- Fixed canonicalizing the file name in the SVDRP command GRAB to allow full path
names (thanks to Stefan Huelswitt).
- Added a missing '-' to the example for viewing a grabbed image on a remote host
(reported by Philippe Gramoullé).
- Made the "What's on now/next?" menus a lot faster by storing a pointer to each
channel's schedule in the cChannel data.
- Made the log messages regarding lost lock of devices "info" instead of "error"
(suggested by Andreas Brachold).
- The SVDRP command GRAB allows file names without extension again (suggested by
Stefan Huelswitt).
- Pressing '0' in the "Schedule" menu now rotates through displaying "This event on
this channel", "This event on all channels" and "All events on all channels".
This can be used to find reruns of a given show, or the episodes of a series.
Note that if there are many channels in your channels.conf, displaying the
"All events on all channels" page may take a while.
- The status markers in the "Schedule" menu are now only updated if a submenu is
closed in which a timer has been modified, which speeds up closing submenus.
- Now only writing Dolby Digital tracks into the 'info.vdr' file of a recording
if Setup.UseDolbyDigital is true (suggested by André Weidemann).
- Added a leading '0' to the day in the DayDateTime() function (thanks to Rolf
Ahrenberg).
- No longer displaying color buttons in the recording info menu if it has been
invoked from a player (reported by Jürgen Schilling).
|
|
- Fixed handling second audio and Dolby Digital PIDs for encrypted channels
(was broken in version 1.3.37).
- Improved TS/PES conversion to better handle lost TS packets (thanks to
Reinhard Nissl).
- Limited the frequency of log messages from the cRepackers.
- Now using the gettid() syscall to get a thread's pid, so that we get a
useful value on NPTL systems (suggested by Johannes Stezenbach).
- Fixed the RCU remote control handling to avoid problems with NPTL (thanks
to Andreas Share for reporting a lockup with the RCU on NPTL systems).
- When displaying the amount of free disk space, the space consumed by
recordings that have been "deleted" but not yet actually "removed" is now
taken into account (suggested by Christian Vogt).
- Now avoiding unnecessary disk access when checking if there are deleted
recordings that need to be removed (reported by Carsten Koch).
- Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now
a deleted recording is retained at least DELETEDLIFETIME seconds before
actually removing it.
The value of DELETEDLIFETIME has been changed to 300. So after (possibly
inadvertently) deleting a recording, there will be at least 5 minutes
in which it can be recovered (unless a new recording immediately requires
the disk space). The count starts again at 0 every time VDR is started.
- Fixed a possible crash when displaying the "Low disk space!" message from
a background thread (thanks to Christof Steininger).
- Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler).
- Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground
and background threads won't interfere.
- The main menu now dynamically updates its contents in case an instant
recording or replay stops, etc.
- The version number of EPG events is now also stored in the epg.data file
(thanks to Kendy Kutzner).
- EPG events that are no longer in the currently broadcasted data stream are
now automatically deleted.
- Removed an invalid access to Event->schedule in cSchedule::DelEvent().
- Modified cSchedule::Cleanup() (events are always sorted by time).
- Schedules are now cleaned up once every hour (not only at 05:00).
- The "Schedule" and "What's on now/next?" menus are now updated if a timer
is set or modified.
- cTimer no longer has its own 'schedule' member, it rather uses that of the
event it has been set to.
- The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus
now immediately creates a timer for the selected event and marks it with 'T'.
If the event is already marked with 'T', the "Red" button opens the "Edit
timer" menu for that timer.
- Removing deleted recordings is now done in a separate thread.
- Dropped the unused "stop recording on primary interface" stuff.
- Converting a grabbed image to JPEG is now done with the new function
RgbToJpeg() (see tools.h).
- The SVDRP command GRAB now determines the image type (JPEG or PNM) from the
extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit
'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but
has no meaning any more.
- The function cDevice::GrabImage() no longer writes the grabbed image to a
file, but rather returns a pointer to the image in memory. The wrapper
function cDevice::GrabImageFile() can be used to write the grabbed image
directly to a file. Plugins that used the old version of cDevice::GrabImage()
need to be adapted to the new interface.
- The new class cBase64Encoder (see tools.h) can be used to encode data in
base64 (thanks to Bob Withers for publishing his Base64 class).
- The SVDRP command GRAB now writes the image data to the SVDRP connection
(encoded in base64) if the given file name consists of only the file
extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file
name (based on a suggestion from Darren Salt).
A simple way of viewing a grabbed image on a remote host is:
svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display -
- The new command line option '-g' must be given if the SVDRP command GRAB
shall be allowed to write image files to disk. The parameter to this option
must be the full path name of an existing directory, without any "..", double
'/' or symlinks. By default, or if "-g- is given, grabbing to files is
not allowed any more because of potential security risks.
- Modified the way the SVDRP command GRAB writes the grabbed image to a file
to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino
Peña):
+ The file handle is now opened in a way that it won't follow symbolic links
(suggested by Darren Salt).
+ The given file name is now canonicalized, so that it won't contain any
".." or symlinks (suggested by Darren Salt).
+ Grabbing to files is limited to the directory given in the the command
line option '-g'. By default grabbing to files is not allowed any more.
- Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos).
- Changed all "illegal" to "invalid" in error messages (there's nothing "illegal"
in VDR ;-).
- When started as user 'root' VDR now switches to a lesser privileged user id,
keeping the capability to set the system time (based on a patch from Ludwig
Nussel). By default the user id 'vdr' is used, which can be changed through
the new command line option '-u'. Note that for security reasons VDR will no
longer run as user 'root' (unless you explicitly start it with '-u root',
but this is not recommended!). The 'runvdr' script has been changed to
use the '-u' option.
- Changed the API of the functions cStatus::Recording() and cStatus::Replaying(),
so that they can provide the full file name of the recording. Plugins that use
these (or the related cStatus::Msg...() functions) need to be adapted
(suggested by Andreas Brugger).
- The DVB devices now retune (and, if applicable, resend the DiSEqC data) if
the lock is lost (based on a patch from Reinhard Nissl).
- Fixed handling multi byte key sequences in cKbdRemote (based on a patch from
Jürgen Schneider).
- Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco
Schlüßler).
- Made the static cControl functions thread safe (thanks to Patrick Fischer).
- Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid
warnings with g++ 4.1.0 (thanks to Ville Skyttä).
- Fixed incrementing the 'state' variables in the repacker classes in remux.c
to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä).
- The Makefile now reports a summary of failed plugins (thanks to Udo Richter).
- The cTimer constructor can now take an optional cChannel (suggested by
Patrick Fischer).
- Fixed setting the main thread id if VDR is running as a daemon.
- Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl).
- Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner).
- Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger).
- Now using FE_READ_STATUS to read the current frontend status (suggested by
Holger Wächtler).
- The "Menu" key now behaves consistently. If there is anything on the OSD, it
is closed when the "Menu" key is pressed, and if there is nothing on the OSD,
the "Menu" key opens the main menu (suggested by Luca Olivetti).
- The new option "Setup/OSD/Timeout requested channel info" can be used to turn
off the automatic timeout of the channel display in case it was invoked by
a press of the "Ok" key (suggested by Thiemo Gehrke).
- A message is now given when an instant recording is started (suggested by
Helmut Auer). Actually the code was already there, just commented out - don't
remember why it wasn't active...
- Removed an obsolete "Summary" text from i18n.c and preceded all key definition
texts with "Key$" to avoid duplicates (reported by Lucian Muresan).
- Preceded all button texts with "Button$".
- Removed obsolete "Eject", "Language" and "scanning recordings..." texts.
- Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill).
- Disabled the use of "fadvise" in cUnbufferedFile because there have been
several reports that it causes more problems than it solves (suggested by
Petri Hintukainen). If you want to use "fadvise", you can activate the line
//#define USE_FADVISE
in tools.c.
- Removed unused 'offset' member from cOsdItem.
- In the "Channels" menu the numeric keys now position the cursor to the channel
with the given number (see MANUAL, section "Remote Control Keys", note (3) for
details).
- The "Mark/Move" function in the "Channels" menu now also works in the non-numeric
sort modes.
- The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if
this is a menu.
- The new "Info" key brings up information on the currently viewed programme
or recording. For a live programme this is the same as "Schedule/Ok", i.e. the
description of the current EPG event. For a recording this is the same as shown
by the "Info" button in the "Recordings" menu. Plugins that implement players
can overwrite their cControl::GetInfo() function to show their own info (see
PLUGINS.html for details). Pressing the "Info" key again while the info is
displayed will close the OSD. In order to assign this new key to an existing
remote control setup, the remote.conf file needs to be deleted and VDR has
to be restarted to go through the process of learning the remote control keys.
- Any cReceivers still attached to a cDevice when that device switches to a
different transponder are now automatically detached (suggested by Patrick
Fischer).
- The "flags" of a timer are now handled as an unsigned integer value. In order
to do this, the interface of cMenuEditBitItem also had to be changed.
- In string entry fields (like, e.g., the file name of a recording) the characters
can now be entered by pressing the numeric keys, the same way as on a
telephone keypad (based on the "Easy Input" patch from Marcel Schaeben).
- Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch
from "single shot" to "weekly", followed by the "Right" key (reported by
Andreas Böttger).
- The file 'ca.conf' is obsolete and has been removed.
- Revised all descriptions regarding CICAM.
- Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling.
- Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack()
(thanks to Reinhard Nissl).
- Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo
Schneider).
- Cleaned up some trailing white space.
|
|
- Added compiler options "-fPIC -g" to all plugins (thanks to Rolf Ahrenberg).
- Fixed initializing the day index when editing the weekday parameter of a
repeating timer (thanks to Marco Schlüßler).
- No longer removing superfluous hyphens in EPG data - would become too
language dependent to handle all kinds of exceptions.
- Modified switching to Dolby Digital audio in live mode, if the driver
and firmware can handle live DD without the need of a Transfer Mode (thanks
to Werner Fink). Live DD mode requires a full featured DVB card and a
LinuxDVB driver with firmware version 0x2622 or higher. Older versions will
use Transfer Mode just like before.
- Implemented handling of the "CA PMT Reply" for CAMs (thanks to Marco
Schlüßler for figuring out some obscure length bytes in the CA PMT Reply
data of AlphaCrypt CAMs).
- Some preparations for being able to record several encrypted channels from
the same transponder at the same time (or record and view different encrypted
channels), provided the CAM in use can handle this. This is work in progress
and isn't actively used, yet.
- Fixed SetProgress() in the 'skincurses' plugin in case Total is 0 (reported
by Stefan Huelswitt).
- Added a copy constructor to cString and fixed its assignment operator
(thanks to Holger Brunn).
- The new function Skins.QueueMessage() can be called from a background thread
to queue a message for display. See VDR/skins.h for details.
- The SVDRP command MESG uses the new message queueing facility, so MESG
commands may now be executed at any time, and the message will be displayed
(no more "pending message").
|
|
- Improved responsiveness inside CAM menus.
- Added handling of the 'Close MMI' tag to avoid error log messages with CAMs
that actually use it.
- Now waiting at startup until all DVB devices are ready. This includes having
all CAMs initialized and ready to decrypt, so that no more "channel not
available" happens if VDR is started with the current channel being an encrypted
one, or a timer on such a channel hits right after starting VDR.
- Fixed cVideoRepacker to better handle errors in data (thanks to Reinhard Nissl).
- Fixed cDvbTuner to avoid lockups on NPTL systems (thanks to Marcel Wiesweg).
- Added 'Service' functions to the plugin interface (thanks to Udo Richter).
See PLUGINS.html, section "Custom services" for details.
- Replaced the get/put_unaligned() macros from <asm/unaligned.h> with own inline
functions to avoid problems on platforms that don't provide these (thanks to
David Woodhouse for his help).
|
|
- Fixed a race condition in cTransfer (thanks to Klaus Heppenheimer for reporting this one).
In doing so, the 'active' variables used by the actual derived cThread classes
have been replaced by the cThread::Running() function.
Plugin authors may want to check their derived cThread classes and replace any 'active'
variables the same way as, for instance, done in transfer.c.
- Fixed handling EPG data for time shifted events (thanks to Marco Schlüßler).
- Increased the default value for 'Min. user inactivity' to 300 minutes (suggested
by Helmut Auer).
- Now storing the channel id in the info.vdr file even if there is no EPG info
available (thanks to Andreas Brachold for reporting that there are empty info.vdr
files created in that case).
- Added some 'mkdir -p' to the Makefile's 'install' target (thanks to Wayne Keer).
- Changed the title of the recording info menu (thanks to Rolf Ahrenberg).
- Fixed handling the frame number display if '7' is pressed before the first editing
mark, or '9' after the last one (thanks to Thomas Günther).
- Now discarding any previous numerical input to switch channels if Up, Down, Channel+,
Channel-, Left or Right is pressed (thanks to Wolfgang Rohdewald for reporting a
problem with this).
- Pressing Ok while entering a channel number now immediately switches to that
channel, without waiting for further input.
- Avoiding unnecessary OSD draw operations caused by the audio track description
display in the ST:TNG skin's channel display (thanks to Oliver Endriss for reporting
this).
- Removed the VIDEO_STILLPICTURE_WORKS_WITH_VDR_FRAMES stuff from
cDvbDevice::StillPicture(), since apparently the VIDEO_STILLPICTURE call works.
|
|
- Fixed handling 'page down', which was broken in version 1.3.26 (thanks to Udo
Richter).
- Modified page scrolling behaviour (based on a suggestion by Patrick Gleichmann).
- The new setup option "OSD/Scroll wraps" can be used to activate wrapping around
in menu lists (based on a suggestion by Patrick Gleichmann).
- Removed the NPTL check at startup, since several users have reported that VDR
now runs fine with NPTL.
- Fixed handling VPS timers, so that they only record if the event they are assigned
to actually has the given VPS time.
- Disabled cVideoRepacker in remux.c, because it has caused several problems
during recording. If you want to test (and maybe debug) it, activate the line
//#define TEST_cVideoRepacker
in remux.c.
- When drawing a bitmap to the OSD, the existing palette of the target can now be
replaced with the new one instead of adding the new entries (thanks to Andreas
Regel).
|
|
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed handling 'summary.vdr' files with more than two empty lines (thanks to
Christian Jacobsen for reporting this one).
- Improved resetting CAM connections (thanks to Marco Schlüßler).
- Implemented cVideoRepacker in remux.c to make sure every PES packet contains
only data from one frame (thanks to Reinhard Nissl).
NOTE: currently this doesn't work with MPEG1, so if you use MPEG1 you may want
to change line 1158 in remux.c to
ts2pes[numTracks++] = new cTS2PES(VPid, resultBuffer, IPACKS);
as it was before.
- EPG events without a title now display "No title" instead of "(null)" (thanks
to Rolf Ahrenberg).
- A device can now detach all receivers for a given PID, as is necessary, e.g.,
for the bitstreamout plugin (thanks to Werner Fink).
- Added the year (two digits) to recording dates in LSTR, and thus also in menus
(suggested by Jan Ekholm).
- Fixed the call to Channels.Unlock() in cEITScanner::Process() (thanks to
Reinhard Nissl).
- Fixed handling timers with a day given as MTWTF--@6, i.e. a repeating timer with
first day not as full date, but just day of month (thanks to Henrik Niehaus for
reporting this one).
- Removed an unnecessary #include from osd.c (thanks to Wolfgang Rohdewald).
- Fixed dropping EPG events that have a zero start time or duration, in case it's
an NVOD event (thanks to Chris Warren).
- Fixed handling page up/down in menu lists in case there are several non selectable
items in a row (thanks to Udo Richter for reporting this one).
- Added cOsdMenu::SetCols() to allow adjusting the menu columns.
- Modified cEITScanner::Process() so that it works on systems with only budget cards
or a mix of DVB-S, DVB-C or DVB-T cards.
|
|
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Some cable providers don't mark short channel names according to the standard,
but rather go their own way and use "name>short name". VDR now splits at this
character for cable channels (thanks to Gerhard Steiner for reporting this one).
- Added a check for Setup.DiSEqC in cDvbDevice::ProvidesTransponder(), otherwise
the EPG scan didn't work on systems that don't use DiSEqC (thanks to Michael
Reinelt for reporting this one).
- Made the Makefile patch friendlier (thanks to Ludwig Nussel).
- Made cOsd::isOpen an integer counter to avoid problems with messages when a
cOsdObject uses the raw OSD (thanks to Andreas Regel for reporting this one).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- The file 'summary.vdr' has been replaced with 'info.vdr' and now contains the
information about a recording, in the same format as the events are stored in
'epg.data' (see man vdr(5) for details). Existing summary files can be converted
to the new format by running the Perl script 'summary2info.pl', as in
summary2info.pl /video
(the parameter given has to be the video directory). If there is no 'info.vdr'
file for a recording, an attempt is made to read a 'summary.vdr'.
- The "Summary" button in the "Recordings" menu has been renamed to "Info", and
the page it brings up now shows the recording's information, much like the EPG
event page. Therefore it now no longer uses the skin's SetText() function, but
rather the SetRecording() function. Skin plugins may need to adjust that function
accordingly (see skinsttng.c, for instance).
- The SVDRP command LSTR now lists the recording information in the same tagged
format as the LSTE command lists the EPG data.
- The audio track menu now contains track descriptions when replaying (provided
such descriptions were available in the EPG data when the recording was made,
and are stored in the info.vdr file).
- Avoiding extra blanks at the end of names of instant recordings.
- Removed converting byte order on big endian systems from cDvbOsd::Flush(),
which, according to Johannes Stezenbach and Paavo Hartikainen, is wrong.
- Added cPlayer::DeviceSetVideoDisplayFormat() (thanks to Marco Schlüßler).
- No longer saving the setup in case of a fatal error, to keep the volume level
from being set to a wrong value (thanks to Marco Schlüßler).
- Fixed a possible hangup when ending a replay session while cIndexFile::CatchUp()
is waiting (thanks to Marco Schlüßler).
- The SVDRP command DELR no longer deletes recordings that are currently being
written to by a timer (thanks to Sascha Volkenandt for pointing out this one).
- Pressing the "Play" key in live viewing mode now resumes a previous replay
session (thanks to Mirko Dölle).
- Now dropping EPG events that have a zero start time or duration (thanks to
Oliver Endriss).
- No longer stopping Transfer Mode or replay immediately when the Power button
is pressed (thanks to Rolf Ahrenberg).
- Moved the NPTL and UTF-8 checks after the version and help output (thanks to
Andreas Kool for pointing out that 'vdr --version' failed on an UTF-8 system).
- Made tChannelID::operator==() inline for better performance (thanks to Georg
Acher).
- Introduced cListBase::count for better performance (thanks to Georg Acher).
- cEvent no longer stores the channelID directly, but rather has a pointer to
the schedule it is in.
- Now using hash tables to speed up cSchedule::GetEvent() (partially based on
a patch from Georg Acher).
- Avoiding unnecessary calls to getLength() in libsi/si.c, and avoiding the
'& 0xff' in CRC32::crc32() of libsi/util.c (thanks to Georg Acher).
- Speeded up deleting duplicate channels.
- Fixed listing recordings with empty episode names in the LSTR command (thanks
to Stefan Huelswitt for pointing this out).
- Added cThread::SetPriority() and using it in cSectionHandler::Action() to
reduce the priority of the section handler threads (as suggested by Georg Acher).
|
|
- The setup option "DVB/Video display format" is now only available if "Video format"
is set to "4:3" (suggested by Mikko Salo).
- Updated the Russian OSD texts (thanks to Vyacheslav Dikonov).
- Dropped CA support for the old '-icam' firmware.
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Updated the Swedish OSD texts (thanks to Tomas Prybil).
- Fixed a few French OSD texts that were in the wrong place.
- Improved matching timers to EPG events, especially in case there are several events
with the same VPS time.
- Fixed cDolbyRepacker to allow recording ProSieben HD broadcasts (thanks to Reinhard
Nissl).
- Fixed cDvbDevice::SetVideoDisplayFormat() in case of 16:9 (thanks to Marco Schlüßler).
- The running status of a VPS event is now only taken seriously if that event has been
seen within the last 30 seconds - otherwise recording is done as if no VPS was
available.
- The day of a timer is now stored as a full date in ISO notation ("YYYY-MM-DD") in
'timers.conf' and for the result of the SVDRP command LSTT (based in parts on a
patch by Roman Krenický).
- Some fixes to avoid compiler warnings in gcc 4.0 (thanks to Ville Skyttä for reporting
these).
- Single shot timers are now reliably deleted when they have expired.
- Fixed setting the colored button help after deleting a recording in case the next
menu entry is a directory (thanks to Steffen Beyer).
- Improved falling back to normal recording if the VPS data hasn't been seen for more
than 30 seconds.
- Added a missing cMutexLock to cRemote::HasKeys() (thanks to Wolfgang Rohdewald).
- All log entries regarding timers now contain a short description of the timer.
|
|
- Removed some unneeded code and fixed access to unallocated memory in
cEvent::FixEpgBugs() (thanks to Wolfgang Rohdewald).
- Avoiding unnecessary calls to SetPid() in cDvbDevice::SetAudioTrackDevice()
(thanks to Marco Schlüßler).
- No longer calling EnsureAudioTrack() in cDevice::SetChannel() if a Transfer Mode is
started, to avoid setting the audio PID on the primary device (thanks to Marco
Schlüßler for pointing this out).
- Replaced the call to system("sync") in SpinUpDisk() with fdatasync(f) to avoid
problems on NPTL systems (thanks to Chris Warren for pointing this out).
- Increased POLLTIMEOUTS_BEFORE_DEVICECLEAR in transfer.c to 6 to avoid problems
with the larger buffer reserve (thanks to Marco Schlüßler).
- Fixed the call to SetVideoFormat() in cDvbDevice::cDvbDevice() (parameter is _bool_).
- Added support for setting the video display mode (thanks to Marco Schlüßler).
- The new setup option "DVB/Video display format" can be used to define which display
format to use for playing wide screen video on a 4:3 tv set.
- Changed MAXDPIDS to 16 (8xAC3 + 8xDTS) (thanks to Werner Fink for pointing this out).
- Completed Dutch language texts (thanks to Hans Dingemans).
- Added 'smi' to the Finnish language codes (thanks to Rolf Ahrenberg).
- Fixed ensuring there is a current audio track in case there is only one track
(thanks to Werner Fink for reporting this one).
- Improved automatic audio track selection.
- Keeping the track language codes and descriptions in Transfer Mode (thanks to
Luca Olivetti).
- Fixed handling repeated kAudio keys.
- Improved displaying the the current audio track in the ST:TNG channel display.
|
|
- Fixed cDvbDevice::SetAudioTrackDevice() to avoid a blank screen after switching
back to live mode if a recording is currently active on the primary device.
- Fixed a possible freeze in pause mode in case a device's PlayPesPacket() function
permanently returns 0 (thanks to Reinhard Nissl and Olaf Titz).
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Restricted the "setting audio track" log message to automatic changes during replay.
- Fixed handling Transfer Mode for radio channels (thanks to Andreas Regel for
reporting this one).
- Fixed handling symbolic links in cRecordings::ScanVideoDir() (thanks to Stefan
Huelswitt).
- Completed the Danish OSD texts (thanks to Mogens Elneff).
- Forcing a new resync after a call to cRemux::Clear() (suggested by Marco Schlüßler).
- The cAudio::Play() function now has an additional parameter 'uchar Id' which tells
the function the substream id of the given audio packet, so that a plugin can
take the right action for the various kinds if audio data - which now also includes
"normal" audio with ids 0xC0...0xDF (based on suggestions by Werner Fink and Macro
Schlüßler).
- Removed the "Cleared/PlayPes(NULL, 0)" handling from cTransfer::Action(), since this
is now done when attaching the player to the device (thanks to Marco Schlüßler).
- Making sure the buffer reserve in cTransfer::Action() is re-established after
clearing the buffer.
- Added DeviceClrAvailableTracks() and DeviceSetCurrentAudioTrack() to cPlayer
(thanks to Marco Schlüßler).
- Fixed a typo in detecting UTF-8 (thanks to Reinhard Nissl).
- Now using twice the buffer reserve in cTransfer if the primary DVB card is an
unmodified version with only 2MB of SDRAM, to avoid audio stuttering when
playing Dolby Digital over the DVB card (thanks to Christian Jacobsen and Chad
Flynt for suggestions and experiments in that area).
- Making sure the first audio packet is not dropped when switching to "pre 1.3.19
Dolby Digital compatibility mode".
- The 'plugins-clean' target of the Makefile now only deletes the actual plugin
library files from this version of VDR (suggested by Andreas Brachold).
- Added a missing 'resultSkipped = 0' to cRemux::Clear() (thanks to Marco Schlüßler
for reporting this one).
- The new function cDvbDevice::SetTransferModeForDolbyDigital() can be used by
plugins that implement Dolby Digital output and thus want to prevent the cDvbDevice
from starting Transfer Mode in order to replay DD over the DVB device.
- Added missing reset of the 'repacker' to cTS2PES::Clear() (thanks to Marco
Schlüßler for reporting this one).
|
|
- Fixed displaying the "Audio" menu with the "Green" button from the "Main" menu
in case there is only one audio track (thanks to Sascha Volkenandt for reporting
this one).
- Now setting primaryDevice = NULL before deleting the devices in cDevice::Shutdown()
to avoid problems in case other threads access it (thanks to Wolfgang Rohdewald for
pointing this out).
- Fixed a buffer overflow in case a station defines all 32 audio PIDs (thanks to
Christian Jacobsen for reporting this one).
- Fixed masking SubStreamType in cDevice::PlayPesPacket() (thanks to Werner Fink
for pointing out this one).
- The new function cPlugin::Stop() shall be used to stop any background activities
of a plugin. Previously this was done in the plugin's destructor, but it is
better to do this in a dedicated function that can be called early when shutting
down.
- Moved the call to SetAudioChannel(0) into cDevice::ClrAvailableTracks() to have it
executed also when starting a replay.
- Completed the Danish OSD texts (thanks to Mogens Elneff).
- Completed the French OSD texts (thanks to Olivier Jacques).
- The new setup option "OSD/Channel info time" can be used to define the time after
which the channel display is removed if no key has been pressed (thanks to
Olivier Jacques).
- Modified cDolbyRepacker to make sure PES packets don't exceed the requested length
(thanks to Reinhard Nissl).
- Fixed several memory leaks that were introduced through the use of cString (thanks
to Stefan Huelswitt for reporting these).
- Added CMD_SPU_CHG_COLCON to cDvbSpuDecoder::setTime() (thanks to Marco Schlüßler).
- Making sure the current audio track is actually one of the ones available in a
recording (thanks to Sascha Volkenandt for reporting a problem when starting
replay of a recording that has no Dolby Digital audio after switching to a channel
that has DD and selecting the DD audio track).
- Removed 'flags' from tTrackId (thought we would need this, but apparently we don't).
- Making sure the "Mute" and "Volume+/-" keys don't interfere with digital audio.
- Fixed the "pre 1.3.19" compatibility mode for old Dolby Digital recordings (thanks
to Werner Fink for pointing out that this can be triggered in the default branch).
- Calling pesAssembler->Reset() in cDevice::AttachPlayer() to avoid problems with
residual data in replay and Transfer Mode (thanks to Werner Fink for pointing this
out).
- Added MPEG1 replay capability to cPesAssembler (thanks to Stefan Huelswitt).
|
