summaryrefslogtreecommitdiff
path: root/po/zh_CN.po
AgeCommit message (Collapse)Author
2012-03-25Version 1.7.27Klaus Schmidinger
Original announce message: VDR developer version 1.7.27 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.27.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.26-1.7.27.diff MD5 checksums: bfeaa79a9e55144bca2b69139c45f1bb vdr-1.7.27.tar.bz2 b23344be51d3e2c2d96cc2dd4e8e564e vdr-1.7.26-1.7.27.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Changed the Green button in the "Edit timer" menu from "Once" to "Single" (suggested by Rolf Ahrenberg). - Fixed some typos in HISTORY and CONTRIBUTORS (thanks to Ville Skyttä). - The channel name column in the "What's on now/next" menu now adjusts its width to display the full short name of each channel (suggested by Dominic Evans). - Dropped the meanwhile obsolete script 'i18n-to-gettext'. - Removed the obsolete function cPlugin::RegisterI18n(). - Removed the obsolete typedef tI18nPhrase. - Adapted menu column widths of 'skincurses' to the wider HD OSD sizes. - Deactivated definition of __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS (recording.h) and LEGACY_CRECEIVER (receiver.h) to trigger an error for any plugin that still uses the respective code. You can reactivate these to quickly make your plugin compile again, but beware that these code parts will be removed in one of the next versions. - Made the "overloaded-virtual" warning an error to detect hidden overloaded virtual functions (thanks to Anssi Hannula for pointing out -Werror=...). Plugin authors may want to change -Woverloaded-virtual to -Werror=overloaded-virtual in their Makefiles. - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Improved fast forwarding to the end of a timeshift recording. - The new function cDevice::DeviceName() returns a string identifying the name of the given device. - When toggling a timer between "Single" and "Repeating", the previous setting is now retained in case the user toggles back to the original value. - When estimating the remaining disk space (in hours), the average data rate of all existing recordings is now taken into account. If this value can't be determined, the previous value of 25.75 MB/min is taken. - No longer using GetFont() (which is not thread safe) in the 'osddemo' plugin. - No longer using GetFont() (which is not thread safe) in cSubtitleRegion::UpdateTextData(). - Fixed a memory leak in cSubtitleRegion::UpdateTextData(). - Moved setting LC_NUMERIC further up to make sure any floating point numbers use a decimal point (suggested by Tobias Grimm). - Added missing channel locking to cEIT. - Fixed reduced bpp support for DVB subtitles (thanks to Rolf Ahrenberg). - Updated the Italian OSD texts (thanks to Diego Pierotto). - Reverted some improvements to Make.config.template (thanks to Christian Ruppert). - Fixed handling IDLEPRIORITY in cDvbDevice::ProvidesChannel() (thanks to Frank Schmirler).
2012-03-11Version 1.7.26Klaus Schmidinger
Original announce message: VDR developer version 1.7.26 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.26.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.25-1.7.26.diff MD5 checksums: eb57398e44935ecb0bfc532bdfead312 vdr-1.7.26.tar.bz2 62e0f39e2c53ec2b5abd3ebb0e00ce3d vdr-1.7.25-1.7.26.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Now checking for NULL in cOsd::AddPixmap() (suggested by Christoph Haubrich). - Fixed the German translation of "VDR will shut down in %s minutes" (thanks to Frank Neumann). - The replay progress display is now turned on whenever a mark is toggled (not only when one is set). - Toggling a mark now restarts the timeout of the replay progress display. - Fixed a possible race condition with the SVDRP commands CLRE and PUTE, where EPG data from the transponder could be handled even though it shouldn't be handled for 10 seconds. - Added some missing member initializations in cBitmap. - Improved displaying the play mode in the ST:TNG skin. - Made the ST:TNG skin the default in case the user selected skin is not available. - Improved displaying signal strength and quality in the ST:TNG skin's channel display. - Fixed switching devices to the transponders of VPS recordings in case there are only bonded devices. The cDevice's "avoid device" mechanism has been replaced by using "occupied". - Fixed selecting devices for the EPG scan in case the primary device is bonded with an other one. - Removed the calls to EITScanner.UsesDevice(this) from dvb[hs]ddevice.c, because the code following these calls is only executed if LiveView is true, which is never the case when the EITScanner switches to a channel. - Removed the obsolete function cEITScanner::UsesDevice(). If a plugin has used this function to find out whether a call to its cStatus::ChannelSwitch() function was due to a live channel switch, it can use that function's new parameter LiveView. Any plugins that implement cStatus::ChannelSwitch() need to add the parameter 'bool LiveView' to that function. - Fixed parsing channel data in case the audio pid is 0. On channels that only broadcast Dolby Digital audio there were sometimes log entries like "changing pids of channel ... from ... to ..." with no apparent difference between the old and new set of pids. - Fixed checking pids in case a channel has only Dolby Digital audio. - The Green button in the "Edit timer" menu can now be used to toggle between single shot and repeating timers. This is the same as pressing '0' when the "Day" field is selected, but it works at any time (and is more obvious). - Revoked "If the first event in a schedule has a table id of 0x00, any incoming EIT data for that schedule from the DVB stream will be completely ignored". - Added a new plugin interface for implementing EPG handlers. + A plugin can implement an EPG handler by creating an object derived from cEpgHandler and implementing the necessary member functions. + The special handling of events with table id 0x00 has been dropped. For backwards compatibility EPG events with table ids lower than 0x4E will be treated as if they had a table id of 0x4E, and the new plugin 'epgtableid0' can be used to have them handled like in previous versions. + The default table id for a newly created cEvent has been changed to 0xFF, which is higher than any normal table id that is broadcast in the EIT data. See PLUGINS.html, section "Electronic Program Guide" for more information.
2012-03-10Version 1.7.25Klaus Schmidinger
Original announce message: VDR developer version 1.7.25 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.25.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.24-1.7.25.diff MD5 checksums: a3fd482a3dd8027706d4f32a88c6bd13 vdr-1.7.25.tar.bz2 f34adcdc0cdab378431d8946872d6b59 vdr-1.7.24-1.7.25.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - The fps value for channels where it differs from the default is now set correctly when pausing live video. - Increased the average character estimate for calculating tab positions in skins, to better suit wide fonts (reported by Rudi Hofer). - Fixed getting the subsystem ids of DVB devices in case they have been rearranged via udev rules. - Added several cTimer::Set...() functions (suggested by Alexander Rieger). - Changed the return value of cTimer::SetFile() to 'void'. - Revoked "Fixed a possible deadlock in time shift mode" because it caused trouble with output on vdr-xine and dxr3, and also short glitches when replaying on any output device. - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed handling subtitle color palettes on channels where subtitles appear "word by word" (thanks to Rolf Ahrenberg). - Fixed upscaling cBitmaps with anti-aliasing (thanks to Rolf Ahrenberg for reporting a problem with color palettes in subtitles). - Fixed getting the video aspect ratio for scaling subtitles. - Removed the "PrimaryLimit". Old "full featured" DVB cards can be run with the --outputonly option to avoid problems with recording high bandwidth channels. Besides, with HDTV becoming ever more popular those cards are pretty much obsolete by now (the TT S2-6400 has no problems recording and replaying high bandwidth channels simultaneously). And, last but not least, people using software players won't notice this change, anyway. - Since cReceivers can have priorities between -99 and 99, the priority for an unused device has been changed from -1 to -100. - If the first event in a schedule has a table id of 0x00, any incoming EIT data for that schedule from the DVB stream will be completely ignored. This way an external EPG source can fill the schedules with EPG data that will not be messed up with that from the DVB data stream. Note, though, that this means VDR can not do VPS controlled recordings with such events! - Added some typecasts to silence gcc compiler warnings (thanks to Rolf Ahrenberg). - Fixed handling overlapping timers in case a VPS timer with higher priority needs to interrupt a timer with lower priority. - The code for the RCU remote control unit has been moved into a separate plugin named "rcu". The REMOTE=RCU option in the 'make' call for VDR is now obsolete. The command line option --rcu is now obsolete. Use -Prcu instead. If you have used --rcu with a device path, use -P"rcu -d<device>". - Added support for automatically selecting subtitles when playing old PES recordings made with the subtitles plugin (thanks to Anssi Hannula). - Revised priority handling to allow receivers with a priority that is lower than that of live viewing (with suggestions from Frank Schmirler): + An idle device (one that is not used for live viewing and has no receiver attached to it) now has priority IDLEPRIORITY (-100). + An unused CAM slot now has priority IDLEPRIORITY. + The default priority of a cReceiver is now MINPRIORITY (-99). + A device that is used only for live viewing (no matter whether it's in Transfer Mode or real live mode) now has priority TRANSFERPRIORITY (-1). + The function cDevice::Receiving() now returns true if there is any receiver attached to the device. Its boolean parameter has no meaning any more. + The default value for the Priority parameter of the function cDevice::ProvidesChannel() has been changed to IDLEPRIORITY. - Added a Query parameter to cDevice::GetDevice(), so that devices can be queried without side effects when zapping. - Replaced min(max()) calls with the new function constrain(). - Fixed handling OSD color button texts in case a menu item has texts of its own (reported by Rolf Ahrenberg). If a plugin creates derived cMenuEditItems that set color button texts, these should not set the texts directly by calling cSkinDisplay::Current()->SetButtons(), but rather call the new member function cMenuEditItem::SetHelp(). - Moved the call to cStatus::MsgChannelSwitch(this, 0) to the beginning of cDevice::SetChannel(), so that any receivers that have been attached to the device by plugins may be detached before the final call to GetDevice(). This actually reverts "Only calling cStatus::MsgChannelSwitch() if a channel is actually going to be switched or has actually been switched successfully" which was made in version 1.1.10, so please report if this has any unwanted side effects.
2012-02-19Version 1.7.24Klaus Schmidinger
Original announce message: VDR developer version 1.7.24 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.24.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23-1.7.24.diff MD5 checksums: a034c5e399417dfc583483f650d003ee vdr-1.7.24.tar.bz2 aa1a2b202da92e65945ff39470b26618 vdr-1.7.23-1.7.24.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed a high load in case a transponder can't be received. - Improved the way DVB_API_VERSION is checked. - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed asserting there is a live programme if the primary device is bonded with a device that starts a recording on a different band. - Fixed the return type of cMyDeviceHook::DeviceProvidesTransponder() in PLUGINS.html. - Fixed a crash in a plugin using cDeviceHook when VDR ends (reported by Oliver Endriss). - Some improvements to the Makefiles (thanks to Christian Ruppert). - Fixed cRecording::LengthInSeconds(), which wrongfully rounded the result to full minutes (thanks to Christoph Haubrich). - Symbolic links are no longer resolved in cRecordings::ScanVideoDir() (thanks to Sundararaj Reel). - The epg.data file is now read in a separate thread to make the startup process faster in case the file is very large (suggested by Helmut Auer). - Fixed selecting the primary device for receiving the live viewing channel in case it is bonded with an other device and has no receiver attached to it. - Fixed a possible crash when canceling VDR while displaying subtitles, and the primary device is no longer available. - Improved handling subtitles of BBC channels. - No longer using tabs as delimiter in the EPG bugfix log (they were garbled in the log file). - Added a missing '.' after the month in VPS strings. - Added some missing 'const' to cDevice (thanks to Joachim Wilke). - Fixed handling the PrimaryLimit when requesting a device for live viewing (reported by Uwe Scheffler). - Removed superfluous calls to SetVideoFormat() from device constructors. This function is called in cDevice::SetPrimaryDevice(), anyway. - An ongoing editing process is now canceled if either the original or the edited version of the recording is deleted from the Recordings menu. - The SVDRP command DELR now won't delete a recording that is currently being edited. - Removed code stub for obsolete SVDRP command MOVT. - The DVB device adapters/frontends are now probed by scanning the /dev/dvb directory instead of looping through adapter/frontend numbers. This allows for "holes" in the device numbering. - cReadDir::Next() now skips directory entries "." and "..". - Fixed a possible deadlock in time shift mode. - Fixed switching into time shift mode when pausing live video (thanks to Reinhard Nissl for helping to debug this one).
2012-01-15Version 1.7.23Klaus Schmidinger
Original announce message: VDR developer version 1.7.23 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diff MD5 checksums: de136f7be28c4b6f1fa0e2218b4acc11 vdr-1.7.23.tar.bz2 2977b75cd8dacad187d11c10b867d56a vdr-1.7.22-1.7.23.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Removed the '.pl' suffix from svdrpsend.pl (sorry, I missed that one). - Fixed bonding more than two devices. - Fixed handling symbolic links in cRecordings::ScanVideoDir() (reported by Sundararaj Reel). - Fixed a memory leak in cRecordings::ScanVideoDir() in case there are too many link levels (reported by Sundararaj Reel). - Removed redundant memset() in the ctor of cSatCableNumbers (triggered by Ville Skyttä pointing out that the argument sequence in the call was wrong). - Removed a redundant NULL check in cDvbSpuDecoder::setTime() (thanks to Ville Skyttä). - Added HasSnr to the DEBUG_SIGNALQUALITY output in cDvbTuner::GetSignalQuality() (triggered by Ville Skyttä pointing out that the variable HasSnr was unused). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added support for HbbTV to libsi (thanks to Christoph Haubrich). - Added support for devices with more than one delivery system per frontend. This requires a DVB driver with version 5.5 or higher that can handle the DTV_ENUM_DELSYS call. With older drivers it will fall back to one delivery system per frontend. - Updated the Hungarian language texts (thanks to István Füley). - cDvbTuner::ExecuteDiseqc() now makes sure only one tuner sends SCR commands at any given time (reported by Frank Neumann). - cEvent::FixEpgBugs() now replaces any newline characters in stream component descriptions with blanks (thanks to Torsten Lang for reporting a problem with EPG data from BSkyB's "MTV MUSIC", S28.2E-2-2010-7012). - Fixed cDvbSubtitleConverter::SetOsdData() (thanks to Rolf Ahrenberg). - Fixed cListBase::Move() in case From and To are equal (reported by Sundararaj Reel). - Added support for DVB-T2 to libsi (thanks to Rolf Ahrenberg). - Added support for handling DVB-T2 transponders. This requires a DVB driver with version 5.3 or higher that can handle the DTV_DVBT2_PLP_ID call (thanks to Rolf Ahrenberg). - Fixed cConfig::Load() for g++ version 4.7.0 (thanks to Ville Skyttä). - Fixed a possible memory corruption in cTsToPes::GetPes() in case of broken TS packets, e.g. when switching channels. - Fixed the SVDRP command CLRE for a single channel in case there are events that have a timer (thanks to Timo Eskola). - BIDI support now checks at runtime whether the system runs with UTF-8 (suggested by Torsten Lang). - Added member functions Adapter() and Frontend() to cDvbDevice (suggested by Rolf Ahrenberg). - The parameters that are only used by "second generation" delivery systems (DVB-S2 and DVB-T2) are no longer written into channels.conf for "first generation" delivery systems (DVB-S and DVB-T). - Changed IndexToHMSF() so that it can handle negative Index values. - Added option -N to the msgmerge call in the Makefile, because fuzzy translation mostly resulted in useless strings. - The new setup option "Replay/Show remaining time" can be used to switch between showing the total length or the remaining time of the recording that is currently replayed. - Fixed wrongfully displaying the length of a recording in the title of the replay progress display. - Fixed frozen live view with device bonding in case the bonded master is used for live viewing (reported by Uwe Scheffler).
2011-12-05Version 1.7.22Klaus Schmidinger
Original announce message: VDR developer version 1.7.22 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21-1.7.22.diff MD5 checksums: b9c0fe1aac8e653c0d0234bc72c2bb2c vdr-1.7.22.tar.bz2 868bb332342c9a78beda17cc85e0bb93 vdr-1.7.21-1.7.22.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. From the HISTORY file: - Fixed scaling subtitles in case the primary device's GetVideoSize() function doesn't return actual values (thanks to Luca Olivetti). - The DiSEqC codes are now copied in the call to cDiseqc::Execute(). - VDR now supports "Satellite Channel Routing" (SCR) according to EN50494 (based on the "unicable" patch from Lars Hanisch). Since "Unicable" is a registered trademark and stands for only one of many implementations of SCR, the following changes have been made compared to the patch, which need to be taken into account by people who have set up their system using the patch: - The 'U' parameter in the diseqc.conf file has been changed to 'S' ("Scr"). - The configuration file name has been changed from "unicable.conf" to "scr.conf". - Updated sources.conf (thanks to Arthur Konovalov). - The SVDRP command LSTC now also accepts channel IDs (thanks to Dominic Evans). - Fixed handling DVB subtitles and implemented decoding textual DVB subtitles (thanks to Rolf Ahrenberg). - Added cap_net_raw to the capabilities that are not dropped (thanks to Dominic Evans). - Fixed setting the start time of an edited recording (thanks to Christoph Haubrich). - Temporarily switching free devices to transponders in order to have their running status updated is now done by marking the devices as "occupied" for a certain amount of time. - The new setup options "LNB/Device n connected to sat cable" can be used to define which DVB-S devices are connected to the same sat cable and are therefore "bonded". This obsoletes the LNBSHARE patch. Users of the LNBSHARE patch will need to newly set up their sat devices with the above options. - Fixed a crash when deleting a recording while cutting it (thanks to Ville Skyttä). - Fixed several spelling errors (thanks to Ville Skyttä). - The new SVDRP command UPDR can be used to trigger an update of the list of recordings (thanks to Lars Hanisch). - Added generating a pkg-config file to the Makefile (thanks to Ville Skyttä). - Removed the '.pl' suffix from all scripts (thanks to Ville Skyttä). - Changed the default location for the LIRC socket to /var/run/lirc/lircd (thanks to Ville Skyttä). - Added file name and line number to LOG_ERROR_STR() (thanks to Rolf Ahrenberg). - Replaced all calls to sleep() with cCondWait::SleepMs() (thanks to Rolf Ahrenberg). - Fixed a crash with malformed SI data (patch from vdr-portal).
2011-09-04Version 1.7.21Klaus Schmidinger
Original announce message: VDR developer version 1.7.21 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.21.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.20-1.7.21.diff MD5 checksums: 7300bfd997db1a848bd774fefe4aec80 vdr-1.7.21.tar.bz2 c4e745939f31543dd607b97d58fc86be vdr-1.7.20-1.7.21.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. This version contains functions to determine the "signal strength" and "signal quality" through cDevice. If you are using a DVB card that contains an stb0899 frontend chip (like the TT-budget S2-3200) you may want to apply the patches from ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches to the LinuxDVB driver source in order to receive useful results from that frontend. From the HISTORY file: - Fixed detecting frames for channels that split frames into several payloads (reported by Derek Kelly). - Now initializing Setup.InitialChannel to an empty string to avoid problems in case there is no setup.conf. - The start time of an edited recording is now set to the time of the first editing mark (thanks to Udo Richter). This obsoletes the CUTTIME patch. - Direct access to the members start, priority, lifetime, and deleted of cRecording as well as to position and comment of cMark is now deprecated. Plugin authors should switch to the new access functions for these members. For now the macro __RECORDING_H_DEPRECATED_DIRECT_MEMBER_ACCESS is defined in recording.h, which exposes these members, so that existing plugins will still compile. Comment out this #define to check whether a particular plugin needs to be modified. This #define may be removed in a future version. - The new functions cRecording::NumFrames() and cRecording::LengthInSeconds() return the number of frames and length (in seconds) of a recording (suggested by Steffen Barszus). - The subtitle PIDs are now stored in the channels.conf file as an extension to the TPID field (thanks to Rolf Ahrenberg). - The new function cDevice::ProvidesEIT() is used to determine whether a device can provide EIT data and will thus be used in cEITScanner::Process() to receive EIT data from the channels it can receive (suggested by Rolf Ahrenberg). Note that by default it is assumed that a device can't provide EIT data, and only the builtin cDvbDevice returns true from this function. - The Audio and Subtitles options are now available through the Green and Yellow keys in the Setup/DVB menu (thanks to Rolf Ahrenberg). This is mainly for remote controls that don't have dedicated keys for these functions. - The SVDRP command HITK now accepts multiple keys (up to 31). - The Recordings menu now displays the length (in hours:minutes) of each recording (thanks to Rolf Ahrenberg). Note that the "new" indicator has been moved from the recording time to the length column. This new format is also used by the SVDRP command LSTR, so in case you have an application that parses the LSTR output, you will need to adjust it to the new format. - The dvbsddevice plugin now supports the new option --outputonly, which disables receiving on SD FF devices and uses the device only for output (thanks to Udo Richter). - Fixed detecting frames on radio channels (reported by Chris Mayo). - Revoked the changes to cFrameDetector that have been introduced in version 1.7.19. Detecting frames in case the Picture Start Code or Access Unit Delimiter extends over TS packet boundaries is now done by locally skipping TS packets in cFrameDetector.
2011-06-19Version 1.7.19Klaus Schmidinger
Original announce message: VDR developer version 1.7.19 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.19.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.18-1.7.19.diff MD5 checksums: 1eb04ecdc2b11ab8641ebfaa2cb93f42 vdr-1.7.19.tar.bz2 db16ce7bb51e0db837ed56ef4744a67e vdr-1.7.18-1.7.19.diff WARNING: ======== This is a developer version. Even though I use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging. This version introduces functions to determine the "signal strength" and "signal quality" through cDevice. If you are using a DVB card that contains an stb0899 frontend chip (like the TT-budget S2-3200) you may want to apply the patches from ftp://ftp.tvdr.de/vdr/Developer/Driver-Patches to the LinuxDVB driver source in order to receive useful results from that frontend. Since apparently the various frontend drivers return different maximum values in their FE_READ_SIGNAL_STRENGTH and FE_READ_SNR functions (some deliver a value in the range 0x0000...0xFFFF, while others return values as "dB/10" or "dBm/10" (the latter with an offset to make the value positive, since the parameter is unsigned), the functions cDvbTuner::GetSignalStrength() and cDvbTuner::GetSignalQuality() use the device's "subsystem ID" to map these values into the range 0...100, which is the normalized return value of these functions. Take a look at these two functions and maybe remove the comment characters from the lines //#define DEBUG_SIGNALSTRENGTH //#define DEBUG_SIGNALQUALITY in dvbdevice.c to get some debug output if your device doesn't return any directly useful values and may have to be added appropriately to the 'switch (subsystemId)' statement. The channel display of the 'sttng' skin uses these values to implement a signal strength/quality display. From the HISTORY file: - Fixed cString's operator=(const char *String) in case the given string is the same as the existing one (thanks to Dirk Leber). - Avoiding a gcc 4.6 compiler error in the skincurses plugin (thanks to Tobias Grimm). - TsGetPayload() now checks if there actually is a payload in the given TS packet (reported by Dirk Leber). - Now sorting the source file names in the call to xgettext, to make sure the results are not dependent on the sequence of the files. Plugin authors may want to change the line containing the xgettext call in their Makefile accordingly by changing "$^" to "`ls $^`". - The primary device is now only avoided for recording if it is an old SD full featured card. This is done through the new function cDevice::AvoidRecording(). - Subtitle PIDs are now also decrypted (thanks to Reinhard Nissl). - Fixed a possible race condition in cDiseqc::Execute() (reported by Marco Göbenich). The return value of cDiseqcs::Get() is now const, so plugin authors may need to adjust their code if they use this function. - The new functions cDevice::SignalStrength() and cDevice::SignalQuality() can be used to determine the signal strength and quality of a given device (thanks to Rolf Ahrenberg for some input on how to use BER and UNC values to generate a "quality" value). - The 'sttng' skin now displays two colored bars at the bottom of the channel display, indicating the strength (upper bar) and quality (lower bar) of the received signal. The number to the left of these bars indicates the actual device the current channel is being received with. - Fixed detecting frames in case the Picture Start Code or Access Unit Delimiter extends over TS packet boundaries (reported by Johan Andersson). In order to fix this, the semantics of cFrameDetector had to be changed a little. See cRecorder::Action() and cIndexFileGenerator::Action() on how to use the new cFrameDetector::NewPayload() function. - The frame detector now only starts collecting PTS values after it has seen the first I-frame, otherwise it might get MaxPtsValues values and stop analyzing even though the incoming data is still garbage (reported by Derek Kelly). - The info file of a recording is now only overwritten with a new fps value if that new value is not the default value (thanks to Derek Kelly for reporting a problem with the fps value being overwritten in case a recording was interrupted and resumed, and the fps value could not be determined after resuming recording). - The initial channel is now stored by the channel ID in the setup.conf file, in order to avoid problems in case channels are reordered or deleted (reported by Lars Bläser). - Added support for "content identifier descriptor" and "default authority descriptor" to 'libsi' (thanks to Dave Pickles).
2011-03-19Version 1.7.17Klaus Schmidinger
- Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Fixed following symbolic links in RemoveFileOrDir() (cont'd) (thanks to Steffen Barszus). - Changed the description of cDevice::GetSTC() to make it mandatory for devices that can replay. - Removed the check for positive STC values from cDvbSubtitleConverter::Action(). - Added cString::operator=(const char *String) (suggested by Antti Seppälä). - Some spelling fixes (thanks to Ville Skyttä). - Passing package name and version to xgettext (thanks to Ville Skyttä). - Made 'dist' target dependent on up to date *.po (thanks to Ville Skyttä). - Added Language and fixed Language-Team header of *.po (thanks to Ville Skyttä). - Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras). - Fixed detecting frames on channels that broadcast with 50 or 60 fps. This avoids artifacts during fast forward/rewind when replaying recordings from such channels. To fix the index of existing recordings from such channels, just delete the 'index' file of the recording and VDR will generate a new one the next time you play it. You should also change the line "F 25" to "F 50" in the 'info' file of that recording. - Added support for "registration descriptor" to 'libsi' and using it in pat.c (thanks to Rolf Ahrenberg). - Fixed unjustified log entries about changed channel pids (reported by Derek Kelly). - Added an include of VDR's 'Make.global' to libsi's Makefile (thanks to Rolf Ahrenberg). - Removed displaying the "contents" information from the "Classic VDR" and "ST:TNG Panels" skins, because it is often wrong and nothing but irritating. - Added typecasts to avoid gcc 4.5 warnings in switch statements on eKeys variables where additional 'k_...' flags are used. - Fixed inclusion of <stdarg.h> (thanks to Henning Heinold). - Changed "frame duration" to "frame rate" in vdr.5 (reported by Tobias Grimm). - Removing a cRemote from the Remotes list in case its initialization failed (thanks to Dominik Strasser). - Added LDFLAGS to the linker calls in the Makefiles (thanks to Joerg Bornkessel and Paul Menzel). - Now updating the 'frames per second' data in the list of recordings when a new recording is started that has a frame rate other than the default. - The include path to the freetype2 header files is now retrieved via a call to 'pkg-config --cflags freetype2' (suggested by Andreas Oberritter). - The OSD now has full TrueColor support. There can be several "pixmaps" that can be overlayed with alpha blending. All existing skins should work out of the box with the TrueColor OSD - the only exception being cOsd::GetBitmap(). Since the TrueColor OSD doesn't use bitmaps, this function will return a dummy bitmap, which may not be what the plugin expects. As long as this bitmap is only used for setting the palette, there is no problem. However, any other operations on this bitmap will have no effect. See the description of the cPixmap functions in osd.h for details about the new functionalities. The "ST:TNG Panels" skin has been enhanced to automatically use the TrueColor OSD if available. The "osddemo" plugin has been extended to show some of the possibilities of the TrueColor OSD if it is run on a system that actually provides TrueColor support. Thanks to Reinhard Nissl for some valuable input, help with debugging, and an implementation of the AlphaBlend() function. - Updated the Slovakian language texts (thanks to Milan Hrala). - Added Serbian language texts (thanks to Milan Cvijanovic). - Fixed reallocating memory in the "pictures" plugin (reported by Paul Menzel, with input from Oliver Endriss). - Fixed reallocating memory in cTsToPes::PutTs() (suggested by Oliver Endriss). - Now checking the result of all realloc() calls. - Fixed setting up the 'Recordings' menu in case there are several recordings with exactly the same name (reported by Marcus Hilbrich). - Setting the audio type of language descriptors to 0x00 in the PAT/PMT generator (thanks to Anssi Hannula). - Changed the compiler optimization flag to -O3, which gives quite a performance boost in the AlphaBlend() function. - While replaying, the editing marks are now updated every 10 seconds (based on a patch from Manuel Reimer). - Now reducing the thread and I/O priority cCuttingThread::Action() to make the foreground process more responsive (suggested by Frank Neumann). - Removed checking for minimum line length of 21 characters in the LIRC receiver code (reported by Gerald Dachs). - Updated the Romanian OSD texts (thanks to Lucian Muresan). - Now storing the original display size when handling DVB subtitles (thanks to Reinhard Nissl). - The original display size of subtitles is now used to scale them properly when displaying them on an HD OSD.
2010-06-06Version 1.7.15Klaus Schmidinger
- Added Macedonian language texts (thanks to Dimitar Petrovski). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added handling of EnhancedAC3DescriptorTag (thanks to Eric Valette). - The default SVDRP port is now 6419 (registered with ICANN/IANA by Christian Tramnitz). Use '-p 2001' to switch back to the old port if necessary. - Updated the Italian OSD texts (thanks to Diego Pierotto). - cDvbDevice::ProvidesTransponder() now checks the modulation capabilities of the device (as far as the driver allows this). - Fixed cFrameDetector::Analyze() in case part of the data has been processed and there is less than MIN_TS_PACKETS_FOR_FRAME_DETECTOR left (reported by Derek Kelly). - Added a note about not deleting cDeviceHook objects to device.h. - Added user defined key kUser0 (suggested by Ulf Kiener). - Include paths are now added instead of overwriting INCLUDES in the Makefile (thanks to Paul Menzel). - The various modulation types are now taken into account when selecting a device for a recording or live viewing, so that devices that provide more capabilities are spared. - Fixed generating PMT language descriptors for multi language PIDs (thanks to Rolf Ahrenberg). - Transponders that use "8psk turbo fec" (a non-standard mode used by North American providers) are now identified by assuming that all 8psk transponders on DVB-S use "turbo fec". In order to determine whether a certain device can handle "turbo fec", the new driver flag FE_CAN_TURBO_FEC is checked. If your device can handle "turbo fec", and your driver doesn't have that flag, yet, you can apply the patch from ftp://ftp.tvdr.de/vdr/Developer/v4l-dvb-add-FE_CAN_TURBO_FEC.diff. A temporary macro in dvbdevice.c defines the flag for all those who don't need this in the driver, so that they can continue using an unmodified driver. Thanks to Derek Kelly for testing this. - Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk). - Fixed handling "none" color entries in XPM files (thanks to Thomas Günther). - Fixed a crash when creating a new channel if the channel list is empty (reported by Halim Sahin). - Updated the Czech OSD texts (thanks to Radek Stastny). - Fixed a possible out of buffer memory access in case of bad TS data (reported by Rolf Ahrenberg). - Implemented handling of HD resolution subtitles according to v1.3.1 of ETSI EN 300 743, chapter 7.2.1 (thanks to Rolf Ahrenberg). - The EPG data now handles stream components 5 (H.264-video) and 6 (HEAAC-audio). - Fixed a problem with external Dolby Digital processing via the '-a' option in live mode and with TS recordings (reported by Christopher Reimer). - Added handling MPEG audio types "ISO/IEC 14496-3 Audio with LATM transport syntax" and "ISO/IEC 13818-7 Audio with ADTS transport syntax" (suggested by Luis Fernandes). See man vdr(5) on how the APID section of channels has been extended to store this information. - Added detecting channels that use service type 0x16. - Added full handling of the stream types of Dolby Digital pids (thanks to Jose Alberto Reguero). - The new setup option "OSD/Number keys for characters" can be used to control whether the number keys can be used to enter characters in a text input field (suggested by Stefan Huskamp).
2010-03-14Version 1.7.14Klaus Schmidinger
- Fixed handling empty strings in cSource::FromString(). - Assigned the source character 'I' to "IPTV" (suggested by Rolf Ahrenberg). - Assigned the source character 'V' to "Analog Video" (suggested by Lars Hanisch). This obsoletes the ANALOGTV patch. - Added support for ATSC devices (thanks to Alex Lasnier). This obsoletes the ATSC patch. - The "Source" item in the "Edit channel" menu now wraps around the list of sources (suggested by Halim Sahin). - Fixed editing channel parameters. - The new setup option "Recording/Delete timeshift recording" controls whether a timeshift recording is automatically deleted after viewing it. This obsoletes the DELTIMESHIFTREC patch. Note that the meaning of the values for this option is different from the DELTIMESHIFTREC patch: 0 means timeshift recordings are not automatically deleted (the default behavior as in previous versions), while 1 means to ask the user whether the recording shall be deleted. - Added cChannel::IsSourceType() to test if a channel's source is of a given type. - Changed the polarization characters in cDvbSourceParam::GetOsdItem() to uppercase. - The full timer file name is now displayed if it ends with "TITLE" or "EPISODE" (pointed out by Udo Richter). - Fixed "attempt to drop wrong frame from ring buffer" when skipping +/- one minute during replay. - The new setup option "Folders in timer menu" controls whether the file names in the timer menu are shown with their full folder path.
2010-02-28Version 1.7.13Klaus Schmidinger
- Updated the Italian OSD texts (thanks to Diego Pierotto). - Changed the position of Sirius 4 to S4.8E in sources.conf (thanks to Alexander Gross). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Moved the declaration of cMenuCommands to menu.h, so that plugins can use it. - Added a note to the MANUAL, saying that adding new transponders only works if the "EPG scan" is active (suggested by Halim Sahim). - Improved handling frames at the beginning and end of a recording in cDvbPlayer for devices with large buffers (thanks to Reinhard Nissl). - Implemented cDeviceHook to allow plugins more control over which device can provide which transponder (thanks to Reinhard Nissl). - Implemented cDevice::GetCurrentlyTunedTransponder() (thanks to Reinhard Nissl). - Moved strictly necessary Makefile options into Make.global, which is included by all plugins (thanks to Paul Menzel). The Makefiles of existing plugins should be modified like this: ------------------------------------------------------------ --- PLUGINS/src/hello/Makefile 2009/10/18 14:00:07 2.1 +++ PLUGINS/src/hello/Makefile 2010/02/06 14:50:03 2.2 @@ -18,7 +18,7 @@ ### The C++ compiler and options: CXX ?= g++ -CXXFLAGS ?= -fPIC -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses +CXXFLAGS ?= -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses ### The directory environment: @@ -26,6 +26,10 @@ LIBDIR = ../../lib TMPDIR = /tmp +### Make sure that necessary options are included: + +include $(VDRDIR)/Make.global + ### Allow user defined options to overwrite defaults: -include $(VDRDIR)/Make.config ------------------------------------------------------------ - Added device definitions to the diseqc.conf file format, so that certain satellite positions can be limited to a given list of devices. This obsoletes the SOURCECAPS patch. - Keeping subtitles visible when pausing replay (thanks to Rolf Ahrenberg). - Fixed adding new transponders in case there is only a single channel in the channel list (reported by Halim Sahin). - The file name in the "Timers" menu now shows only the base name of the recording without the folder path (if any). Otherwise with long folder paths the actual recording name was not visible at all. - Updated the Romanian OSD texts (thanks to Lucian Muresan). - Exported some libsi functions (thanks to Lucian Muresan). - Improved scalability of the default skins. - Fixed the German translation of "Folder name must not contain '%c'!" (thanks to Frank Schmirler). - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Plugins can now define new sources. In order to implement this, the following changes were made: + The transponder parameter string is no longer interpreted by cChannel, but rather stored as is and used only by the respective device. That way plugins can use a channel's parameter string to store arbitrary data (see vdr.5). + The new class cSourceParam can be used by plugins to define new sources, and to implement OSD items that will be used in the channel editor for editing the source specific parameters of a channel (see dvbdevice.c for an example of how this is done for the default DVB devices). + Purely numerical values are no longer accepted in the 'source' parameter of a channel. This obsoletes the PLUGINPARAM patch. - Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras). - cSafeFile::Close() now flushes the file (suggested by Stephan Austermühle). - The option "Setup/DVB/Use Dolby Digital" now only controls whether Dolby Digital tracks appear in the "Audio" menu. Dolby Digital is always recorded. This obsoletes the DOLBYINREC patch.
2010-01-31Version 1.7.12Klaus Schmidinger
- Changed the EVCONTENTMASK_* macros to enums and changed "mask" to "group". - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - The "Edit timer" menu can now set the folder for the recording from a list of folders stored in "folders.conf". - Updated the Italian OSD texts (thanks to Diego Pierotto). - If svdrphosts.conf contains only the address of the local host, the SVDRP port is opened only for the local host (thanks to Manuel Reimer). - Renamed 'runvdr' to 'runvdr.template' and no longer copying it to the BINDIR in 'make install' (thanks to Martin Dauskardt). - Added plain text error messages to log entries from cOsd::SetAreas() (suggested by Rolf Ahrenberg). - cPalette::ClosestColor() now treats fully transparent colors as "equal"; improved cDvbSpuBitmap::getMinBpp() (thanks to Matthieu Castet and Johann Friedrichs). - The new setup option "Miscellaneous/Channels wrap" controls whether the current channel wraps around the beginning or end of the channel list when zapping (thanks to Matti Lehtimäki). - Fixed determining the frame duration on channels where the PTS deltas jitter by +/-1 around 1800. - The PCR pid in generated PMTs is now set to the channel's PCR pid again. - Fixed determining the frame duration on channels where the PTS deltas jitter by +/-1 around 3600. - The PCR pid is now recorded for channels where this is different from the video PID. To facilitate this, the interfaces of cTransfer, cTransferControl, cRecorder and cReceiver have been modified, so that the PIDs are no longer given in separate parameters, but rather the whole channel is handed down for processing. The old constructor of cReceiver is still available, but it is recommended to plugin authors that they switch to the new interface as soon as possible. When replaying such a recording, the PCR packets are sent to PlayTsVideo() - The files "commands.conf" and "reccmd.conf" can now contain nested lists of commands. See vdr.5 for information about the new file format.
2010-01-06Version 1.7.11Klaus Schmidinger
- Fixed resetting the file size when regenerating the index file. - The new function cDevice::PatPmtParser() can be used in derived devices to access the PAT/PMT of the currently replayed material. - Updated the Italian OSD texts (thanks to Diego Pierotto). - The PCR pid in generated PMTs is now set to 0x1FFF ("no PCR pid") in cPatPmtGenerator::GeneratePmt(), because VDR doesn't record the PCR pid. - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - The 'sky' plugin is no longer part of the VDR source. - Improved SPU handling on devices with limited OSD capabilities (thanks to Matthieu Castet). - Several code modifications to avoid compiler warnings (thanks to Winfried Köhler). - Added stream type 11172 AUDIO to cPatPmtParser::ParsePmt() (thanks to Johann Friedrichs). - Removed debug output of '-' from cTransfer::Receive(). - Added defines for large files to the 'newplugin' script (reported by Udo Richter). - Removed the workaround for short channel names of "Kabel Deutschland", because apparently they now have their data according to the DVB standard (thanks to Johann Friedrichs). - Some fixes to dvbspu.[hc] (thanks to Johann Friedrichs). - Fixed a busy loop when moving editing marks (thanks to Johann Friedrichs). - Updated sources.conf (thanks to Derek Kelly). - Modified cCharSetConv so that it can be used to convert from "whatever VDR uses" to a given code (thanks to Joachim Wilke). - Channel names containing commas are now handled correctly in channels.conf. If a channel's short name contains a comma, it is replaced with a '.'. - cDevice now logs the device number when a new device is created. - Fixed handling STREAMTYPE_11172_AUDIO in cPatPmtParser::ParsePmt(). - cParsePatPmt now has functions to retrieve the audio, dolby and subtitle pids. - cPatFilter::Process() now only stores CA descriptors for video and audio pids (thanks to Francesco Saverio Schiavarelli for reporting a problem with channels that have some encrypted components that VDR doesn't use). - cDevice::AddPid() now stores the stream type of the given pid (thanks to Andreas Regel). - Added cFont::FontName() and cFont::Size() (thanks to Andreas Regel). - cPatPmtParser now also stores the audio stream types. - The support for full featured DVB cards of the TT/FuSi design has been moved into the new plugin 'dvbsddevice'. On systems that use such a card as their primary device, this plugin now needs to be loaded when running VDR in order to view live or recorded video. If the plugin is not loaded, the card will be treated like a budget DVB card, and there will be no OSD or viewing capability. - Fixed handling the "CA PMT" generation (revised a change not mentioned in version 1.7.9's changes, which caused a malfunction with Conax and Viaccess CAMs). - Fixed stopping subtitle display when switching the primary device (thanks to Anssi Hannula). IMPORTANT NOTE TO PLUGIN AUTHORS: a plugin that implements a derived cDevice class that can replay video must now call the MakePrimaryDevice() function of its base class. - Fixed compiler warnings "format not a string literal and no format arguments" in some syslog calls (thanks to Rolf Ahrenberg). - The new command line options --edit and --genindex can be used to edit a recording or generate its index without actually starting the entire VDR (based on a patch from Helmut Auer). - Improved the description of the transponder parameters in vdr.5 (thanks to Winfried Köhler). - Avoiding setting the video stream type to 2 if the vpid is 0 (problem reported by Arthur Konovalov). - Implemented handling the "Content Descriptor" (based on a patch from Rolf Ahrenberg). The 'classic', 'sttng' and 'curses' skins display the textual representation of the content descriptors as "genre". The epg.data file stores the genre using the tag character 'G'. - Implemented handling the "Parental Rating Descriptor" (based on a patch from Rolf Ahrenberg). The 'classic', 'sttng' and 'curses' skins display the parental rating (if given) in their event displays. The epg.data file stores the parental rating using the tag character 'R'. IMPORTANT NOTE: if VDR doesn't display a parental rating, this does not necessarily mean that the given programme is suitable for all audiences! - Rearranged cEvent members to minimize memory waste. - After a CLRE command, no further EPG processing is now done for 10 seconds, so that data sent with subsequent PUTE commands doesn't interfere with data from the broadcasters (suggested by Helmut Auer). - Added support for DVB cards with multiple fontends. Note that this only works for DVB cards where each frontend can be used independently of all the others on the same adapter. - Fixed plugin arguments corruption with glibc 2.11 on x86_64 (thanks to Anssi Hannula).
2009-11-22Version 1.7.10Klaus Schmidinger
- Updated the Italian OSD texts (thanks to Diego Pierotto). - Fixed wrong bracketing in cChannel::SubtitlingType() etc. (thanks to Rolf Ahrenberg). - Fixed not logging changes for channels that have no number (reported by Timothy D. Lenz). - Changed the project's URLs and email to tvdr.de. - Added Lithuanian language translations (thanks to Valdemaras Pipiras). - Updated Chinese language texts (thanks to Nan Feng). - Only checking DVB_API_VERSION to be >=5 in order to stay compileable in case the DVB API version number is increased (the API claims to always be backward compatible). - Fixed saving terminal settings when running in background (thanks to Manuel Reimer). - Fixed cFrameDetector::Analyze() to handle video streams where the frame type is not detectable from the first TS packet of a frame. - Fixed writing the PCR pid into the PMT in cPatPmtGenerator::GeneratePmt() (reported by Rene van den Braken). - Added Slovakian language texts (thanks to Milan Hrala). - Fixed EntriesOnSameFileSystem() to avoid using f_fsid, which may be 0 (thanks to Frank Schmirler). - Fixed starting a recording at an I-frame. - Fixed generating the index for recordings from channels that put a whole GOP into one payload unit. - The index file for TS recordings is now regenerated on-the-fly if a recording is replayed that has no index. This can also be used to re-create a broken index file by manually deleting the index file and then replaying the recording (at least until the index file has been generated). - The cRingBufferLinear::Read() function now returns -1 and sets errno to EAGAIN if the buffer is already full. - Fixed handling DVB subtitles for PES recordings (thanks to Rolf Ahrenberg). - Added the audio id to the call of PlayAudio() in cDevice::PlayTsAudio() (thanks to Andreas Schaefers). - Fixed references to old *.vdr file names in MANUAL (reported by Arthur Konovalov). - Reverted "Removed limitation to PAL resolution from SPU handling" because it cause nothing but trouble. Besides, the core VDR doesn't use this, anyway. - Fixed the default value for "Pause key handling" in the MANUAL (reported by Diego Pierotto).
2009-06-14Version 1.7.8Klaus Schmidinger
- The name of the function cDevice::GetVideoSize() wasn't very well chosen for its purpose of defining the optimum size of the OSD for the current output device. Therefore a new function named cDevice::GetOsdSize() has been introduced (suggested by Rolf Ahrenberg). Plugin authors should implement this function in classes derived from cDevice, if they are able to replay video. cDevice::GetVideoSize() still exists and should return the actual size of the video material that is currently replayed. Note that because of the many possible aspect ratios for video material, the type of the Aspect parameter of GetVideoSize() has been changed to 'double', and the Aspect parameter in both functions is named differently, because it returns different values (suggested by Reinhard Nissl). Thanks to Oliver Endriss for his input on calculating the Aspect factor in GetOsdSize(). - Fixed the way the OSD size is determined on full featured DVB cards (thanks to Oliver Endriss). - Increased MAXOSDHEIGHT to 1200 (suggested by Nicolas Huillard). - Removed limitation to PAL resolution from SPU handling. - Checking fd_video in cDvbDevice::GetVideoSize() to avoid error messages on systems with no real primary replay device (reported by Martin Neuditschko). - Added a note to cTsToPes::GetPes() about having to call it repeatedly, once it has returned a non-NULL value. - Added MPEG 1 handling to remux.c (thanks to Ales Jurik). - Fixed use of time_t in cEIT::cEIT() (thanks to Tobias Bratfisch). - Added missing update of lastOsdSizeUpdate. - EIT events are now only processed if a plausible system time is available, to avoid wrong handling of PDC descriptors (thanks to Tobias Bratfisch). - Removed unused 'synced' member from cTsToPes (reported by Christoph Haubrich). - Added a note to cTsToPes about all TS packets having to belong to the same PID, and that for video data GetPes() may only be called if the next TS packet that will be given to PutTs() has the "payload start" flag set (suggested by Christoph Haubrich). - Added a note about the meaning of PERCENTAGEDELTA in cRingBuffer::UpdatePercentage() (thanks to Rolf Ahrenberg). - The new setup option "Recording/Pause key handling" can be used to define what happens if the Pause key on the remote control is pressed during live tv (thanks to Timo Eskola). - Added a note about cFont::GetFont() not being thread-safe. - Fixed generating PAT/PMT version numbers in case the PIDs change during recording (reported by Reinhard Nissl). - Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk). - Fixed a memory leak when reaching the end of a recording during replay (reported by Reinhard Nissl). - Fixed calling close(-1) in cUnbufferedFile::Close() (reported by Reinhard Nissl). - Added a workaround for the broken linux-dvb driver header files (based on a patch from Tobias Grimm). - Fixed handling the length of DiSEqC command sequences (reported by Reinhard Nissl). - Fixed cOsdMenu::Display() in case the menu size has changed (thanks to Reinhard Nissl). - Added some missing 'const' keywords to avoid compilation errors with gcc 4.4 (thanks to Ville Skyttä and Ludwig Nussel). - Modified cSVDRP::CmdGRAB() to avoid writing into const data (reported by Ludwig Nussel). - Fixed calculating menu colum widths in case the font has a size other than the default size (reported by Reinhard Nissl). - Added a plausibility check for the OSD percentage parameters to avoid problems in case the values are stored in the setup.conf file in a wrong way. - Fixed variable types in cIndexFile (reported by Udo Richter).
2009-05-03Version 1.7.7Klaus Schmidinger
- The new function cDevice::GetVideoSize() returns the size and aspect ratio of the video material currently displayed. This function is used to determine the proper size of the OSD. Plugin authors should implement this function in classes derived from cDevice, if they are able to replay video. - The OSD and font sizes are now defined in percent of the actual video display size. The maximum OSD size has been raised to 1920x1080, to allow full screen OSD on HD systems. - The OSD size is now automatically adjusted to the actual video display (provided the output device implements the GetVideoSize() function). - cFrameDetector::Analyze() now syncs on the TS packet sync bytes (thanks to Oliver Endriss for reporting broken index generation after a buffer overflow).
2008-12-14Version 1.7.2Klaus Schmidinger
- Added a note about 'Id' being obsolete to the description of cDevice::PlayAudio(). - Switched to the new S2API driver API, which was decided to become the official DVB API in the kernel (based on patches from Igor M. Liplianin, Niels Wagenaar and Edgar Hucek). VDR now uses the S2API driver from http://linuxtv.org/hg/v4l-dvb. In order to correctly detect DVB-S2 capable devices, you need to apply the patch from ftp://ftp.cadsoft.de/vdr/Developer/v4l-dvb-s2api-add-s2-capability.diff to the driver source, because the S2API doesn't provide a way of telling whether a device can handle DVB-S2 transponders. - The cDvbTuner::IsTunedTo() function now also checks the symbol rate in case of DVB-S and DVB-C. - Improved handling PES video packets with zero length when converting from TS to PES. For good replay in Transfer Mode on full featured DVB cards you may want to apply the patch from ftp://ftp.cadsoft.de/vdr/Developer/av7110_v4ldvb_api5_audiobuf_test_1.diff to the driver (thanks to Oliver Endriss).
2008-04-13Version 1.7.0Klaus Schmidinger
- Re-implemented handling of DVB-S2, which first appeared in version 1.5.14, but was revoked in version 1.5.15 in favor of making a stable version 1.6.0. VDR now requires the "multiproto" DVB driver, e.g. from http://jusst.de/hg/multiproto. Note that the channels.conf file now supports additional parameters, so you may want to make sure you have a backup of this file in case you need to go back to the previous version of VDR! - Fixed displaying transponder data when it is modified (thanks to Reinhard Nissl). - Fixed handling the counter in detection of pre 1.3.19 PS data (thanks to Reinhard Nissl). - Improved logging system time changes to avoid problems on slow systems under heavy load (suggested by Helmut Auer). - Now setting the thread name, so that it can be seen in 'top -H' (thanks to Rolf Ahrenberg). - Fixed initializing the timer's flags in the cTimer copy constructor (thanks to Andreas Mair). - Fixed setting the OSD level in the 'osddemo' example (thanks to Wolfgang Rohdewald). - Increased the time between checking the CAM status to 500ms to avoid problems with some CAMs (reported by Arthur Konovalov).
2008-03-23Version 1.6.0Klaus Schmidinger
- Updated the Croatian language texts (thanks to Adrian Caval). - Added Chinese language texts (thanks to Nan Feng). - Updated the Portuguese language texts. - Added a note about VDR_CHARSET_OVERRIDE to the INSTALL file.
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-24 16:18:24 +0000