This is a "plugin" for the Video Disk Recorder (VDR). Written by : Andreas Brachold Project's homepage: http://projects.vdr-developer.org/wiki/plg-imonlcd This iMON LCD plugin for VDR is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 3 of the License. This iMON LCD plugin for VDR is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this iMON LCD plugin for VDR. If not, see . See the file COPYING for license information. Description: ------------ imonlcd is a plugin for the Video Disc Recorder and shows information about the current state of VDR on iMON LCD. Install LIRC kernel module lirc_imon: ------------------------------------- You need installed kernel module lirc_imon installed to use the iMon LCD. This module are provided by LIRC (which will also allow you to use the IR receiver that is built into the screen). Other software like LCDproc should not be used, it could locking the device access. Install LIRC A newer or current CVS version of LIRC is required for support of the iMON LCD. You need to have the CVS client installed and then you can issue the following commands: #> cvs -d:pserver:anonymous@lirc.cvs.sourceforge.net:/cvsroot/lirc login #> cvs -z8 -d:pserver:anonymous@lirc.cvs.sourceforge.net:/cvsroot/lirc co lirc #> cd lirc #> ./autogen.sh #> ./setup.sh If you have any errors at this point, make sure you've installed all the prerequisite build tools. At this you'll be at the "setup" menu for LIRC. You'll need to choose "Driver Configuration" then "USB Devices" then "Soundgraph iMON IR/LCD". Choose OK, then "Save configuration & run configure" to run the configure script. Once that finishes, run the following commands to install the modules: #> make #> make install #> modprobe lirc_imon At this point, you've got LIRC installed, and you might like to take some time to set up your remote (if you've got one). That step is outside the scope of these instructions, so I'll just skip that and move on to install vdr-plugin-imonlcd now. Install vdr-plugin-imonlcd: --------------------------- Unpack the vdr-plugin-imonlcd tarball to $VDRSOURCE/PLUGINS/src directory #> cd /usr/local/src/vdr/PLUGINS/src #> tar -xzvf vdr-imonlcd-0.0.1.tgz #> ln -s imonlcd-0.0.1 imon Compile the plugin (from VDR's source directory) #> cd /usr/local/src/vdr/PLUGINS/src #> make plugins #> make install Check follow requirements ------------------------- * module lirc_imon is loaded * /dev/lcd0 still exits * /dev/lcd0 are writable * To determine need protocol to communicate with LCD, known values 0038 - For LCD with ID 15c2:0038 SoundGraph Inc (default) ffdc - For LCD with ID 15c2:ffdc SoundGraph Inc #> lsusb | grep 15c2 Bus 002 Device 002: ID 15c2:0038 SoundGraph Inc. or by udev #> udevinfo -a -n /dev/lcd0 \ | grep -2 'ATTRS{idVendor}=="15c2"' \ | grep ATTRS{idProduct} | cut -d '=' -f 3 "0038" Start VDR with the plugin. --------------------------- You have to specify the device and protocol of your display in the config file on the command line. Possible options are: -d DEV, --device=DEV sets the lcd-device to other device than /dev/lcd0 -p MODE, --protocol=MODE sets the protocol of lcd-device 0038 - For LCD with ID 15c2:0038 SoundGraph Inc (default) ffdc - For LCD with ID 15c2:ffdc SoundGraph Inc Examples: vdr -P'imonlcd' vdr -P'imonlcd -d /dev/lcd0 -p ffdc' Setup options ------------- This options are editable at run time. (Menu: Setup > Plugin > imonlcd ... ) * Contrast - Set contrast from display. (Default: 200) * Default font - Used font, there should installed like other FreeType supported fonts * Disc spinning mode - Mode of disc icons at top left corner (used as playback notification) Options are Slim disc/Full disc * Exit mode - Do nothing - Just leave the "last" message there - Showing clock - Show the big clock - Turning backlight off - Blank the device completely - Show next timer - Show time and title of next timer - Wake up on next timer - Use display to wake up the VDR-PC, at next active timer * Margin time at wake up (min) - Define a margin time, if wake up on exit mode used. (Default: 5 minutes) Plugin SVDRP commands --------------------- * HELP - List known commands * OFF - Suspend driver of display. * ON - Resume driver of display. * ICON [name] [on|off|auto] - Force state of icon. Use this commands like follow samples #> svdrpsend.pl PLUG imonlcd OFF 220 vdr SVDRP VideoDiskRecorder .... 250 driver suspended 221 vdr closing connection #> svdrpsend.pl PLUG imonlcd HELP ICON 214-ICON [name] [on|off|auto] 214- Force state of icon. Names of icons are: 214- Music,Movie,Photo,DVD,TopTV,Web,News ... This commands can have follow responses OFF : 250 driver suspended 251 driver already suspended ON : 250 driver resumed 251 driver already resumed 554 driver could not resumed ICON : 250 icon state 'auto' 251 icon state 'on' 252 icon state 'off' * 501 unknown command