Added the UPDATE-2.2.0 file2.1.9

2 files changed, 389 insertions, 0 deletions

diff --git a/HISTORY b/HISTORY
index 90c59d53..ed9f24c8 100644
--- a/HISTORY
+++ b/HISTORY
@@ -8520,3 +8520,4 @@ Video Disk Recorder Revision History
   different file system), and changed handling the 'error' variable in cDirCopier, so
   that it is initialized to 'true' and will only be set to 'false' if the entire
   copy process has been successful (problem reported by Christoph Haubrich).
+- Added the UPDATE-2.2.0 file.
diff --git a/UPDATE-2.2.0 b/UPDATE-2.2.0
new file mode 100644
index 00000000..fe516bdb
--- /dev/null
+++ b/UPDATE-2.2.0
@@ -0,0 +1,388 @@
+This is a summary of the changes in VDR 2.2.0 since the last stable
+version 2.0.0. It only contains things that are of actual importance
+to the user and doesn't mention the many fixes and improvements that
+have been made "behind the scenes".
+
+See the file HISTORY for a detailed list of all changes.
+
+Support for steerable satellite dishes:
+
+- Added basic support for positioners to control steerable satellite dishes.
+  + Supports GotoN (aka "DiSEqC 1.2") and GotoX (aka "USALS").
+  + The new DiSEqC command code 'P' can be used to instruct a positioner to move the
+    dish to the required satellite position. When a 'P' code is processed, further
+    execution of the remaining DiSEqC sequence (if any) is postponed until the positioner
+    has reached the new satellite position.
+  + The new special source value of "S360E" can be used in diseqc.conf to indicate that
+    an entry using a positioner can move the dish to any requested position within its
+    range. Think of it as "full circle".
+  + The devices a particular cDiseqc or cScr applies to are now stored directly in each
+    cDiseqc or cScr, respectively.
+  + A plugin can implement a custom positioner control (see PLUGINS.html, section "Positioners").
+  + The new function cSkinDisplayChannel::SetPositioner() can be implemented by skins to
+    show the user a progress display when the dish is being moved. The default implementation
+    calls SetMessage() with a string indicating the new position the dish is being moved to.
+    The LCARS skin shows a progress bar indicating the movement of the dish.
+  + The new parameters "Site latitude", "Site longitude", "Positioner speed", and
+    "Positioner swing" in the "Setup/LNB" menu can be used to configure the necessary
+    values for a steerable dish.
+  + The cDvbTuner now has a new status tsPositioning, in which it waits until a steerable
+    dish has reached its target position. Parsing SI data is paused until the target
+    position has been reached.
+- Changed the sign of the satellite position value in cSource to reflect the standard
+  of western values being negative. The new member function cSource::Position() can be
+  used to retrieve the orbital position of a satellite.
+
+Conditional Access:
+
+- The new function cCamSlot::Decrypt() can be used by derived classes to implement a
+  CAM slot that can be freely assigned to any device, without being directly inserted
+  into the full TS data stream in hardware. A derived class that implements Decrypt()
+  will also need to set the new parameter WantsTsData in the call to the cCamSlot
+  base class constructor to true, in order to receive all the TS packets that
+  contain data necessary for decrypting.
+- Many member functions of cCamSlot have been made virtual to allow for easier
+  implementation of derived classes.
+- cDvbDevice::GetTSPacket() now calls CamSlot()->Decrypt() in order to allow CAM slots
+  that can be freely assigned to any device access to the TS data stream.
+- Improved locking for CAM slots and made the pure functions of cCiAdapter have
+  default implementations, to fix a possible crash with CI adapters and CAM slots
+  that are implemented in a plugin.
+- Added logging the supported system ids of a CAM.
+- Now waiting explicitly until all CAM slots are ready before switching to the
+  initial channel when VDR is started. This is necessary in case CI adapters are
+  used that are not physically connected to a dedicated device. The respective checks
+  in cDvbDevice have been removed to avoid redundancy.
+- Now unassigning CAMs from their devices when they are no longer used.
+- Now making sure the primary device goes into transfer mode for live viewing if the
+  CAM wants to receive the TS data.
+- Added a log message in case a receiver is detached from its device because the
+  assigned CAM can't decrypt the channel.
+- The pid of the PMT in which the CA descriptors of a given channel are broadcast
+  is now stored together with the CA descriptors and can be retrieved by calling
+  GetPmtPid() (this information is only required to receive encrypted channels
+  with the OctopusNet receiver via the 'satip' plugin).
+- Modified the CAM API so that it is possible to implement CAMs that can be freely
+  assigned to any devices.
+- The Yellow button in the "Setup/CAM" menu can now be used to put the selected
+  CAM into a mode where it remains assigned to a device that is tuned to the current
+  channel until the smart card it contains is activated and the CAM thus starts to
+  descramble (see MANUAL, section "Setup/CAM" for details).
+- Fixed cCamSlot::Assign(), so that it actually ignores the value of Query if Device
+  is NULL (as described in the header file).
+
+Satellite Channel Routing:
+
+- Added support for "Satellite Channel Routing" (SCR) according to EN50607, also
+  known as "JESS".
+
+Subtitles:
+
+- Improved displaying DVB subtitles.
+- The debug output now goes into an HTML file named dbg-log.htm and shows the actual
+  bitmaps (dbg-nnn.jpg) used to display the subtitles. That way it is much easier to
+  see what's actually going on.
+- The new function cOsd::DrawScaledBitmap() is now used for drawing subtitles.
+  This function can be reimplemented by high level OSDs which may be able to do
+  the scaling in hardware or otherwise more efficiently.
+- Fixed (well, actually worked around) a problem with subtitles not being displayed
+  because the broadcaster doesn't set the data's version numbers as required by the
+  DVB standard.
+- Added support for PGS subtitles.
+
+Plugins:
+
+- A plugin can implement a custom positioner control (see PLUGINS.html, section "Positioners").
+- The new menu category mcRecordingEdit is now used to mark menus that edit recording
+  properties.
+- The Recordings menu can now be called with a cRecordingFilter, which allows the
+  caller to have it display only a certain subset of the recordings.
+- cDevice::TrickSpeed() now has an additional parameter named Forward, which indicates
+  the direction in which replay is being done. This information may be necessary for
+  some output devices in order to properly implement trick modes. Authors of plugins
+  that implement output devices will need to add this parameter to their derived cDevice
+  class, regardless of whether they will make use of it or not.
+- Avoiding unnecessary pkg-config warnings in plugin Makefiles.
+  Plugin authors may want to apply the following change to their Makefile:
+  -PKGCFG = $(if $(VDRDIR),$(shell pkg-config --variable=$(1) $(VDRDIR)/vdr.pc),$(shell pkg-config --variable=$(1) vdr || pkg-config --variable=$(1) ../../../vdr.pc))
+  +PKGCFG = $(if $(VDRDIR),$(shell pkg-config --variable=$(1) $(VDRDIR)/vdr.pc),$(shell PKG_CONFIG_PATH="$$PKG_CONFIG_PATH:../../.." pkg-config --variable=$(1) vdr))
+- The new function cStatus::ChannelChange() can be implemented by plugins to be
+  informed about changes to the parameters of a channel that may require a retune.
+  This may, for instance, be useful for plugins that implement live streaming, so that
+  they can react on changes to a channel's PIDs or CA descriptors.
+- The new function cOsd::DrawScaledBitmap() is now used for drawing subtitles.
+  This function can be reimplemented by high level OSDs which may be able to do
+  the scaling in hardware or otherwise more efficiently.
+- Use of the function cOsd::GetBitmap() outside of derived classes is now deprecated,
+  and it may be made 'protected' in a future version, since it doesn't work with
+  TrueColor OSDs. Plugin authors may want to modify their code so that it
+  works without this function.
+- Modified the descriptions of several threads, so that the important information
+  (like device or frontend numbers) is within the first 15 characters of the
+  string, because only these are displayed in thread listings. Plugin authors may
+  want to do the same.
+- Plugins can now implement the function SetMenuSortMode() in their skin objects
+  derived from cSkinDisplayMenu, to get informed about the currently used sort
+  mode, if applicable.
+- Added cOsdProvider::OsdSizeChanged(), which plugins that implement an output device
+  can call to signal a change in the OSD that requires a redraw of the currently
+  displayed object.
+
+Skins:
+
+- The new function cSkinDisplayChannel::SetPositioner() can be implemented by skins to
+  show the user a progress display when the dish is being moved. The default implementation
+  calls SetMessage() with a string indicating the new position the dish is being moved to.
+  The LCARS skin shows a progress bar indicating the movement of the dish.
+- The LCARS skin now shows the source value of the current channel in its channel display.
+- Plugins can now implement the function SetMenuSortMode() in their skin objects
+  derived from cSkinDisplayMenu, to get informed about the currently used sort
+  mode, if applicable.
+
+Remote control:
+
+- Revised the section on "Learning the remote control keys" in the INSTALL file to
+  avoid the impression that there actually is a default remote.conf file, and to
+  not use any alphabetic keys for special functions, so that they remain available
+  for textual input.
+- The LIRC remote control now connects to the socket even if it doesn't yet exist when
+  VDR is started.
+- Added handling UTF-8 'umlaut' characters to cKbdRemote.
+
+Devices:
+
+- The cDvbTuner now has a new status tsPositioning, in which it waits until a steerable
+  dish has reached its target position. Parsing SI data is paused until the target
+  position has been reached.
+- cDevice::IsPrimaryDevice() now also checks whether the primary device actually has
+  a decoder and returns false otherwise. This should improve device allocation on
+  systems that are only used as a receiver and don't actually display anything.
+- All bonded devices (except for the master) now turn off their LNB power completely
+  to avoid problems when receiving vertically polarized transponders.
+- cDevice::TrickSpeed() now has an additional parameter named Forward, which indicates
+  the direction in which replay is being done. This information may be necessary for
+  some output devices in order to properly implement trick modes. Authors of plugins
+  that implement output devices will need to add this parameter to their derived cDevice
+  class, regardless of whether they will make use of it or not.
+- Now checking whether the primary device actually has a decoder before retuning the
+  current channel after a change in its parameters. This fixes broken recordings on
+  the primary device on "headless" systems.
+- Refactored setup parameter handling for output devices:
+  + The function cDevice::GetVideoSystem() has been deprecated and will be removed
+    in a future version. In order to check whether a particular plugin needs to be
+    modified if this function is removed, you can comment out the line
+    #define DEPRECATED_VIDEOSYSTEM
+    in device.h.
+  + Handling the "video (display) format" (things like 16:9, 4:3, pan&scan, letterbox
+    etc) shall now be done by the individual output devices, because the types and
+    numbers of parameters are too device specific. The Setup/DVB parameters
+    "Video format" and "Video display format" are still there for now and can be used
+    by SD devices. HD devices, however, shall not use these parameters (any more),
+    but rather implement their own setup menu with the necessary parameters for
+    controlling output.
+  + The dvbhdffdevice plugin has been modified accordingly.
+  + Made it clear that cDevice::SetDigitalAudioDevice() merely tells the output device
+    that the current audio track is Dolby Digital. This function was only used by the
+    original "full featured" DVB cards - do not use it for new developments!
+    If an output device has several ways of replaying audio (like HDMI or analog jack)
+    it shall implement the proper options in its plugin's SetupMenu() function.
+- Added support for "Pilot", "T2-System-Id" and "SISO/MISO" parameters.
+- Added subsystem id support for DVB devices connected via USB.
+
+DiSEqC:
+
+- The new DiSEqC command code 'P' can be used to instruct a positioner to move the
+  dish to the required satellite position. When a 'P' code is processed, further
+  execution of the remaining DiSEqC sequence (if any) is postponed until the positioner
+  has reached the new satellite position.
+
+EPG:
+
+- Added Begin/EndSegmentTransfer() to the EPG handler interface.
+
+OSD:
+
+- In the "Select folder" menu pressing Ok now selects the folder, even if this is a
+  folder that contains sub folders (marked with "..."). To open such a folder you
+  can press the Red key.
+- The Recordings menu now remembers the last recording the cursor was positioned on,
+  independent of the last replayed recording. When a replay ends, however, the cursor
+  will initially be positioned to the last replayed recording again when the menu
+  is opened.
+- Added cOsdProvider::OsdSizeChanged(), which plugins that implement an output device
+  can call to signal a change in the OSD that requires a redraw of the currently
+  displayed object.
+- The "Select folder" menu now adds the folder names of all existing recordings to
+  any names that have been predefined in "folders.conf".
+- Fixed an inconsistent behavior between opening the Recordings menu manually via the
+  main menu and by pressing the Recordings key. In the latter case it automatically
+  opened all sub folders to position the cursor to the last replayed recording, which
+  is unexpected at this point. You can still navigate to
+  the last replayed recording (if any) by pressing Ok repeatedly in the Recordings
+  menu.
+
+Channels:
+
+- Channels that are no longer contained in the current SDT of a transponder are now
+  marked with the keyword OBSOLETE in their name and provider fields. That way you can
+  identify obsolete channels when you switch to them, and you can get the complete
+  overview of all obsolete channels by sorting the Channels list by provider (by
+  pressing the 0 key twice). Automatic deletion of obsolete channels may follow later.
+- Added support for LCN (Logical Channel Numbers), which plugins may use to sort
+  channels.
+- Added "NORDIG" to the list of "DVB/Standard compliance" options and using it to
+  restrict the LCN (Logical Channel Numbers) parsing to networks that actually use
+  this non-standard feature.
+
+Recordings:
+
+- The code for distributing recordings over several video directories has been
+  removed. VDR now by default assumes that the video directory is one big disk.
+  Distributing the video directory over several disks was a useful feature in times
+  when disks were still relatively small, but it also caused serious problems in case
+  one of the disks failed. Nowadays hard disks come in sizes measured in terabytes,
+  and tools like "mhddfs" can be used to combine several disks to form one large volume.
+  A recommended method for a relatively safe disk setup in a VDR system is to use two
+  1TB (or larger) disks and use them as a RAID-1 (mirrored). That way, if one disk
+  fails, you can replace it without data loss.
+- If you absolutely need to use several separate disks to store recordings, you can
+  write a plugin that uses the new cVideoDirectory API to implement the necessary
+  functionality (see PLUGINS.html, section "The video directory"). You can copy the
+  respective code from previous versions of videodir.c.
+  IMPORTANT NOTE: If you write a plugin that implements a distributed video directory,
+  =============== be sure to make cVideoDirectory::Rename() follow symbolic links!
+                  This functionality was never implemented in VDR and it therefore
+                  used a workaround in cutter.c. See the section marked with
+                  // XXX this can be removed once RenameVideoFile() follows symlinks
+                  in previous versions of cutter.c.
+  + CloseVideoFile() is obsolete and has been removed.
+  + The functions OpenVideoFile(), RenameVideoFile(), RemoveVideoFile(), VideoFileSpaceAvailable(),
+    VideoDiskSpace(), RemoveEmptyVideoDirectories(), IsOnVideoDirectoryFileSystem() and
+    PrefixVideoFileName() are now static members of cVideoDirectory and need to be called
+    with the proper prefix.
+  + The name of the video directory is now available through cVideoDirectory::Name().
+- Added renaming and moving recordings and folders, editing a recording's priority and
+  lifetime, and queueing cutting jobs.
+  + The "Recording info" menu now has a new Blue button named "Edit", which opens a
+    dialog in which several properties of the selected recording can be changed. It can
+    be renamed or moved into another folder and its priority and lifetime can be
+    modified.
+    The new blue "Edit" button in the "Recordings" menu opens a dialog in which a folder
+    can be renamed or moved. See MANUAL, section "Managing folders".
+  + In the "Edit recording" menu the Yellow button ("Delete marks") allows you to delete
+    all editing marks of the selected recording.
+  + cCutter is no longer a static class. Cutting requests should now be invoked by
+    calling RecordingsHandler.Add(ruCut, FileName). See the new cRecordingsHandler
+    class in recording.h.
+  + Cutting jobs are now placed in a queue (together with any move or copy jobs) and
+    are processed one by one.
+  + The new SVDRP command MOVR can be used to rename a recording
+  + Note that in several places in the source code a "copy" operation is mentioned,
+    however there is no user interface for this, yet.
+- The function cRecordings::MBperMinute() now only takes into account recordings with
+  less than 5 seconds per megabyte, in an attempt to filter out radio recordings
+  The result of this function was way off any realistic
+  value in case there are many radio recordings in the video directory.
+- When cutting a recording it is now checked whether there is already an edited
+  version of this recording (with the same name, but starting with '%'), and the
+  user is prompted for confirmation to overwrite it.
+- Fixed numbering frames. Previously they were numbered starting from 1, while it
+  is apparently standard to number them from 0. Any existing recordings with editing
+  marks (which will now be off by one) can still be cut with all VDR versions from
+  1.7.32, because these will automatically adjust editing marks to I-frames.
+  Users of stable releases shouldn't notice any problems.
+- Now returning from removing deleted recordings after at most 10 seconds, or if the
+  user presses a remote control key, to keep the system from getting unresponsive
+  when removing a huge number of files.
+- Fixed generating the index file of an existing recording in case at the end of a TS file
+  there is less data in the buffer than needed by the frame detector. In such a case
+  it was possible that frames were missed, and there was most likely a distortion
+  when replaying that part of a recording. This is mostly a problem for recordings that
+  consist of more than one *.ts file. Single file recordings could only lose some
+  frames at their very end, which probably doesn't matter. At any rate, if you have
+  generated an index file with VDR version 2.0.6, 2.1.5 or 2.1.6, you may want to
+  do so again with this version to make sure the index is OK.
+- Added the new command line option --updindex, which can be used to update an
+  incomplete index of a recording.
+- In the "Edit recording" menu the '0' key can now be used on the "Name:" field to
+  remove the name of the recording and replace it with the last element of the
+  recording's folder path name. See MANUAL, section "Managing folders" for details.
+
+Replay:
+
+- The new option "Setup/Replay/Pause replay when jumping to a mark" can be used to
+  turn off pausing replay when jumping to an editing mark with the '9' key.
+- The new option "Setup/Replay/Skip edited parts" can be used to automatically skip
+  the edited parts of a recording during replay, without the need to actually cut
+  the recording.
+- The new option "Setup/Replay/Pause replay at last mark" can be used to make replay
+  go into Pause mode when it has reached the last "end" mark.
+- The '8' key for testing an edited sequence now also jumps to the next *end*
+  mark if "Setup/Replay/Skip edited parts" is active. This allows for testing edits
+  in recordings that have actually been cut, as well as recordings that have not
+  been cut, in case "Skip edited parts" is enabled.
+- A recording is now still considered unviewed when stopping replay within 10 seconds
+  of the first mark.
+- The keys '1' and '3' can now be used in replay mode to position an editing mark
+  in "adaptive" mode. See MANUAL, section "Editing a Recording".
+- The new option "Setup/Replay/Alternate behavior for adaptive skipping" can be used
+  to make adaptive skipping only halve the skip distance when the direction changes.
+  That way you can reach the desired point in a recording even if you make one too
+  many skips in a certain direction (see MANUAL for details).
+
+SVDRP:
+
+- The new SVDRP command MOVR can be used to rename a recording
+
+Audio:
+
+- Added the new parameters "Setup/Miscellaneous/Volume steps" and
+  ".../Volume linearize". See the MANUAL for details.
+- Added handling for DTS audio tracks to cPatPmtParser::ParsePmt().
+
+Misc:
+
+- Reverted the change from version 1.5.7 that made all logging go to LOG_ERR.
+- The Yellow button in the main menu no longer acts as "Pause" if "Pause key handling"
+  is set to "do not pause live video".
+- Added code for parsing LCN and AVC descriptors to libsi.
+- Changes in the teletext PID no longer cause retuning (and thus interrupting a
+  recording).
+- Made it clear that the Data parameter in cDevice::StillPicture() may point to a
+  series of packets, not just a single one.
+- Changed '%a' to the POSIX compliant '%m' in all scanf() calls.
+- cTSBuffer now provides the number of available bytes in its Get() function.
+- The script given to VDR with the '-r' option is now also called after the recording
+  process has actually started.
+- Updated 'sources.conf'.
+- Increased MIN_TS_PACKETS_FOR_FRAME_DETECTOR to 100 and introduced counting the number
+  of actual video TS packets in cTsPayload in order to be able to record channels that
+  sometimes need many TS packets for detecting frame borders.
+- Improved PAT/PMT scanning to speed up initial tuning to encrypted channels on
+  transponders with many PAT entries.
+- The SDT is now only parsed *after* the NIT has been read, and it explicitly uses
+  the source value derived from the NIT. This should prevent new channels from being
+  created with the wrong source.
+- Added support for systemd. To activate this you need to add "SDNOTIFY=1" to the
+  'make' call.
+- No longer logging an error message in DirSizeMB() if the given directory doesn't
+  exist. This avoids lots of log entries in case several VDRs use the same video
+  directory and one of them has already physically removed a recording directory,
+  while the others still have it in their list of deleted recordings.
+- VDR now reads command line options from *.conf files in /etc/vdr/conf.d.
+  See vdr.1 and vdr.5 for details.
+- Added the functions IndexOf(), InsertUnique(), AppendUnique() and RemoveElement()
+  to the cVector class.
+- Added functions to set and retrieve the priority of a cReceiver.
+- Changed the German weekday names from "MonDieMitDonFreSamSon" to
+  "Mo.Di.Mi.Do.Fr.Sa.So.".
+- Added the channel name to log messages that reference a channel.
+- Added ARGSDIR to the ONEDIR section of Make.config.template.
+- Added SDNOTIFY, NO_KBD and BIDI to Make.config.template.
+- Modified runvdr.template to improve compatibility with the "bash" and "dash" shells.
+- Updated sources.conf to reflect the fact that Astra 4A and SES5 are actually in
+  two separate positions.
+- Fixed cMarks::GetNextBegin() and cMarks::GetNextEnd(). The behavior of these two
+  functions is now exacly as described in the header file. Editing marks that are
+  placed at exactly the same offset in a recording are now preserved in the cutting
+  process.