The keys '1' and '3' can now be used in replay mode to position an editing mark in "binary" mode

1 files changed, 26 insertions, 3 deletions

diff --git a/MANUAL b/MANUAL
index e984d099..5b34ea16 100644
--- a/MANUAL
+++ b/MANUAL
@@ -363,15 +363,29 @@ Version 2.0
   - 0       Toggles an editing mark. If the mark indicator shows a red triangle,
             the current mark is deleted. Otherwise a new mark is set at the
             current position.
-  - 4, 6    Move an editing mark back and forward. You need to first jump to
-            an editing mark for this to work.
+  - 1, 3    Move an editing mark back and forward in "binary" mode. Pressing
+            either of these keys for the first time moves the mark 120 seconds
+            in the given direction (configurable via "Setup/Replay/Binary skip
+            initial value"). Further presses of the same key keep moving
+            the mark by the same value. Once the other key is pressed, the value
+            is divided by 2 (hence the name "binary") with every further press
+            of either key. Pressing '1' and '3' alternatingly divides the
+            distance all the way down to a single I-frame. That way a particular
+            place in a recording (for instance the beginning or end of a
+            commercial break) can be found very quickly. If none of these two
+            keys is pressed for a while (configurable via "Setup/Replay/Binary
+            skip timeout") the distance falls back to the initial value.
+            If replay is not in Pause mode, or if there is no mark at the
+            current position, the skip is performed without moving any mark.
+  - 4, 6    Move an editing mark back and forward by one I-frame. You need to
+            first jump to an editing mark for this to work.
   - 7, 9    Jump back and forward between editing marks. Replay goes into still
             mode after jumping to a mark. If the current position is at the
             first or last mark, or if there are no marks at all, these keys
             jump to the very beginning or end, respectively, of the recording.
   - 8       Positions replay at a point 3 seconds before the current or next
             "begin" mark and starts replay.
-  - 2       Start the actual cutting process.
+  - 2       Starts the actual cutting process.
 
   Editing marks are represented by black, vertical lines in the progress display.
   A small black triangle at the top of the mark means that this is a "begin"
@@ -967,6 +981,15 @@ Version 2.0
                          In order to work, this option must be enabled before starting
                          replay.
 
+  Binary skip initial value (s) = 120
+                         Defines the number of seconds to jump from the current replay
+                         position in either direction, when pressing the '1' or '3'
+                         key for the first time after the "Binary skip timeout".
+
+  Binary skip timeout (ms) = 3000
+                         Defines the number of milliseconds after which pressing the
+                         '1' or '3' key falls back to the "Binary skip initial value".
+
   Resume ID = 0          Defines an additional ID that can be used in a multi user
                          environment, so that every user has his/her own resume
                          files for each recording. The valid range is 0...99, with