summaryrefslogtreecommitdiff
path: root/vdr.1
diff options
context:
space:
mode:
Diffstat (limited to 'vdr.1')
-rw-r--r--vdr.114
1 files changed, 8 insertions, 6 deletions
diff --git a/vdr.1 b/vdr.1
index 86f5bdf7..b18f3b4f 100644
--- a/vdr.1
+++ b/vdr.1
@@ -8,7 +8,7 @@
.\" License as specified in the file COPYING that comes with the
.\" vdr distribution.
.\"
-.\" $Id: vdr.1 1.26 2006/06/24 10:07:16 kls Exp $
+.\" $Id: vdr.1 1.27 2006/11/19 10:02:31 kls Exp $
.\"
.TH vdr 1 "30 Apr 2006" "1.4.0" "Video Disk Recorder"
.SH NAME
@@ -23,12 +23,12 @@ It can work with signals received from satellites (DVB-S) as
well as cable (DVB-C) and terrestrial (DVB-T) signals.
At least one DVB card is required to run \fBvdr\fR. With it you can watch
-live tv while recording one or more other broadcasts from the same transponder.
+live TV while recording one or more other broadcasts from the same transponder.
It is also possible to start watching a recorded programme before the live
broadcast has ended (\fBtime shifting\fR). In order to record from different
transponders simultaneously two or more DVB cards are necessary.
By default \fBvdr\fR can support up to four
-DVB cards. The primary DVB card (the one your tv set is connected to) has
+DVB cards. The primary DVB card (the one your TV set is connected to) has
to be a "full featured" card, which means it must contain an MPEG decoder
and provide audio and video signal outputs.
@@ -76,7 +76,7 @@ Set logging to \fIlevel\fR.
\fB0\fR\ =\ no logging, \fB1\fR\ =\ errors only,
\fB2\fR\ =\ errors and info, \fB3\fR\ =\ errors, info and debug.
The default logging level is \fB3\fR.
-If logging should be done to LOG_LOCALn instead of
+If logging should be done to LOG_LOCAL\fIn\fR instead of
LOG_USER, add '.n' to LEVEL, as in 3.7 (n=0..7).
.TP
.BI \-L\ dir ,\ \-\-lib= dir
@@ -122,10 +122,12 @@ Use a serial port remote control device.
If \fIpath\fR is omitted, vdr uses \fI/dev/ttyS1\fR.
.TP
.BI \-r\ cmd ,\ \-\-record= cmd
-Call \fIcmd\fR before and after a recording.
+Call \fIcmd\fR before and after a recording. See the file \fIINSTALL\fR for
+more information.
.TP
.BI \-s\ cmd ,\ \-\-shutdown= cmd
-Call \fIcmd\fR to shutdown the computer.
+Call \fIcmd\fR to shutdown the computer. See the file \fIINSTALL\fR for more
+information.
.TP
.BI \-t\ tty ,\ \-\-terminal= tty
Set the controlling terminal.